UA-3FX
Transcription
UA-3FX
Audio Interface UA-3FX USB Audio Capture & Playback Device with Effects What is AF Technology? AF Technology (Adaptive Focus Technology) is a new, advanced means of managing audio data through two separate AD converters. The UA-3FX has one 32 Bit DSP chip and two 24-bit AD converters. The DSP chip acts as the brain, managing each AD converter, sending different audio information to each, to better replicate the original audio coming into the device. As a result, AF Technology can maintain the delicate nuance in quiet audio passages while maintaining the overall dynamic range of the sound. T he UA-3FX represents the greatest advance in the UA-3x series of products, and replaces the UA-3D. The UA-3FX functions with all the advantages of the UA-3D, including both analog & digital audio connections. The UA-3FX is powered by the USB bus, making it an ideal portable recording device. The UA-3FX includes all of the following advances over the UA-3D: • Onboard DSP effects • ASIO & WDM support for low latency use with recording programs • Adaptive Focus Technology for increased fidelity Main Features • • • • • • • • • • AF (Adaptive Focus) Technology Up to 24 Bit/48 kHz sampling rate Onboard DSP Effects (1. Mastering, 2. Listening, 3. Performance) Microphone (Dynamic & Plug-in-powered)/Guitar/Line input ports S/P DIF optical IN/OUT USB Bus powered, no AC Adaptor required Supports 5.1 channel Dolby surround digital out Supports both ASIO2.0/WDM and OS standard drivers Low latency, Direct Monitoring support Compatible with WindowsXP/2000/Me/98, MacOS9, OS X Specifications: Number of Audio Channels Record: Playback: Full duplex Interface 1 stereo pair 1 stereo pair Signal Processing PC interface: 24 bits AD/DA Conversion: Internal Processing: processing) 24 bits (linear) 32 bits (Effect USB, Digital input/output Optical type conforms to IEC60958 consumer formatEffect 1. Mastering Noise Suppressor/Enhancer/Low boost/Limiter 2. Listening Center Cancel/High boost/Low boost/Reverb 3. Performance Voice change/Distortion/Chorus/Delay Connectors Sampling Frequency Digital output: 32/44.1/48 kHz Digital input: 32/44.1/48 kHz AD/DA Conversion: 32/44.1/48 kHz Frequency Response 48.0 kHz : 44.1 kHz : 32 kHz : 20 Hz to 22 kHz (+0 dB/-2 dB) 20 Hz to 20 kHz (+0 dB/-2 dB) 20 Hz to 14 kHz (+0 dB/-2 dB) Line Input Jacks (RCA phono type) x 2 MIC Input Jack (Miniature phone type) GUITAR/MIC Input Jack (1/4 inch phone type) Line Output Jacks (RCA phono type) x 2 Headphones Jack (Stereo miniature phone type) Digital Input Connector (Optical type) Digital Output Connector (Optical type) USB Connector (USB Type B) Power Supply Supplied from the computer via USB Nominal Input Level Line Input Jacks:-10 dBu MIC Input Jack: -45 dBu GUITAR Input Jack: Current Draw 250 mA -30 dBu Dimensions Nominal Output Level Line Output Jacks: -10 dBu Residual Noise Level 175 (W) x 125.5 (D) x 42.6 (H) mm 6-15/16 (W) x 5 (D) x 1-11/16 (H) inches Weight (input terminated with 1 k ohms, MAIN VOLUME: 0 dB, Monitor: OFF, IHF-A typ._ 305 g/ 11 oz Accessories Output Jack -112 dBu (SN ratio 102dB) Startup Manual USB cable CD-ROM