HYDRASIL INGok.cdr - Actives4Cosmetics

HIGH TECHNOLOGY BIOACTIVE
Helps protect the capillary structure during the chemical process
Introduction
The capillary fibers are mainly formed by
alpha-keratin, which is not water soluble,
consisting in 18 - 25 amino acids linked
by sulfur and hydrogen bridges.
Chemical processes such as permanent
hair straightening, it is essential to break
the sulfur bridges, unfortunately, also
partially broken salt and hydrogen
bridges, as a result is a loss of water and
minerals, damaging the structure of the
hair fiber .
With regard to the processes of oxidative
hair dye (semi or permanently from), it
attacks the hydrogen and salt bridges,
which in the same way damage the hair
structure.
Silanetriol & Hair Structure
Organic silica is one of the most abundant trace elements in
nature.
The body assimilation capacity of the silica gradually decreases
with age.
Recently has been shown that the concentration of organic silica
present in the capillary area is 5 to 6 times higher than that found
in the epidermis. Therefore the use of active silica complex as
biological agents, in suitable concentration, represent an
advanced alternative to combat specific problems.
The organic silica contributes to the increase the chemical
resistance of keratin. Both the quality and quantity of hair
depends significantly on the presence of silica at all levels:
dermis, epidermis and hair fibers.
Inner Hair Protection
Silica & Panthenol Bio-Organic Complex
Resistant to Alkaline pH
Moisturizing Concept
In hair care, Hydra-Sil protects the internal moisture and helps
protect the hydrogen bridges attacked during chemical
processes. Hydra-Sil provides essential nutrients to improve
hair strength, obtaining stronger, shinier and smoother hairs.
Hydra-Sil is also indicated for the care of brittle hairs and
increased capillary density (anti-aging effect).
Advanced Protection
Internal Moisturation
Exclusive Technology
Characterisitics
INCI Name: Silanetriol (and) Panthenol
Appearance:
Color:
pH:
Preservatives:
lightly opalescent liquid
yellowish
4.5 - 6.5
phenoxiethanol and sodium benzoate
Cosmetic Applications:
Bio active developed to be incorporated in cosmetic products for
hair care such as shampoos, hair conditioners, capillary masks,
tonics and capillary treatments.
Due to its resistance to alkaline pH Hydra Sil is recommended for
the manufacture of hair straighteners, relaxers, permanents and
hair dyes.
Recommended Dosage: 2.0 - 5.0%
HIGH TECHNOLOGY BIOACTIVE
Helps protect the capillary structure during the chemical process
HYDRA PROTECTOR CAPILLARY CONDITIONER
Formulations
HYDRA PROTECTOR CAPILLARY SHAMPOO
Phase Product
INCI Name
%w/w
Phase Product
INCI Name
%w/w
A
Deionized Water
Softcat SX 1300X
Water
Polyquaternium 67
25.00
0.40
A
Deionized Water
Carbomer
Water
Carbomer
to 100
0.40
B
B
Sodium Hydrozide Sodium Hydroxide
q.s.
Versene Na2
Deionized Water
Cellosize QP
Lipex Shea Q50
0.10
to 100
0.30
3.00
C
Deionized Water
Softcat SX 1300X
30.00
0.40
Dissodium EDTA
Water
Hydroxyethylcellulose
Shea Butteramidopropyl
Trimonium Chloride
PEG-90 (and) Water
D
Amisol TRIO
Cetearyl Alcohol
Palm Oil
Hydrogenated Vegetable Oil
Behentrimonium Methosulfate
(and) Ceterayl Alcohol
Phospholipids (and)
Glycine Soja Oil (and)
Glycolipids (and) Glycine Soja
Sterols
4.00
2.00
1.00
1.50
E
Phospholipids (and)
Glycine Soja Oil (and)
Glycolipids (and) Glycine Soja
Sterols
Alkalan k90
Cocamide DEA
Versene Na2
Dissodium EDTA
Fragrance
Fragrance
Lipex Shea Betaine Shea Butteramidopropyl
Betaine
Laurion N
Laurion SO
0.30
Polymer W25
C
3.00
0.10
1.00
3.00
25.00
4.00
Hydra-Sil
Sodium Laureth Sulfate
Sodium Laureth Sulfate
(and) Glycol Distearate
Methylchloroisothiazolinone
(and) Methylisothiazolinone
Silanetriol (and) Panthenol
0.80
Citric Acid
Citric Acid
q.s
Salicat MM
F
Water
Polyquaternium 67
Amisol TRIO
D
0.08
METHOD
Add all items of phase A and agitate
until complete homogenization. Add
phase B and homogenize, set pH
between 6 and 6.5. Heat phase C items
to 40oC with medium agitation until
complete homogenization. Add phase
A and B and homogenize.
Homogenize phase D and add it to the
main mix. Add phase E and allow
homogenization after each addition.
If it’s necessary correct pH with phase F
to pH 6.0 - 6.5
METHOD
Heat phase A to 80 - 85oC and
homogenize.
Heat phase B to 80 - 85oC and
homogenize.
With constant agitation add
phase B to phase A and agitate
for 10 - 15 minutes.
With agitation cool to 40 - 45oC
and add phase C allowing
complete homogenization after
each addition.
If it’s necessary correct pH with
phase D to 4.5 - 5.0,
Alcool C1618S
Akofrite
Akogel
Sunquart TMS
E
Salicat MM
2.00
0.30
0.08
Hydra-Sil
Fragrance
Methylchloroisothiazolinone
(and) Methylisothiazolinone
Silanetriol (and) Panthenol
Fragrance
0.80
1.00
Citric Acid
Citric Acid
q.s.
METHOD
Heat phase A to 40oC for 5 minutes and homogenize. Heat phase B to 8085oC and mix, heat phase C to 80-85oC and mix. Add phase A to B and
homogenize with agitation. With constant agitation add phase A/B to
phase C and agitate for 10-15 minutes. Cool to 40oC with agitation and
add phase D allowing homogenization after each addition. If it’s
necessary correct pH with phase E to 4.0-4.5
HYDRA PROTECTOR CAPILLARY CONDITIONER
Phase Product
INCI Name
%w/w
A
Alcool C1618 S
Akogel
Polylac 136A
Sunquart TMS
Cetearyl Aochol
Hydrogenated Vegetable Oil
Cetyl Alctate
Behentrimonium Methosulfate
(and) Cetearyl Alchol
5.00
1.50
0.15
0.50
B
Deionized Water
Glycerine
Versene Na2
Lipex Shea Q50
Water
Glycerin
Dissodium EDTA
Shea Butteramidopropyl
Trimonium Chloride
PEG-90M (and) Water
to 100
3.00
0.10
3.00
3.00
0.08
Hydra-Sil
Amodimethycone
Methylchloroisothiazolinone
(and) Methylisothiazolinone
Silanetriol (and) Panthenol
1.00
Citric Acid
Citric Acid
q.s.
Polymer W25
C
D
Silicone DC
Salicat MM
4.00