1. Sustance or preparation and company identification

Transcription

1. Sustance or preparation and company identification
SAFETY DATA SHEET
Division
Page
Special products
1/3
Rev.: 1
January 2016
1. Sustance or preparation and company identification
Sustante or preparation identification
COPSON
Company identification
COMPOSAN INDUSTRIAL Y TECNOLOGÍA S.L.
C/ Narciso Monturiol s/n, Polígono Industrial Rompecubas.
Valdemoro 28340. Madrid
Emergency telephone: 91 895 0968 ( during office hours )
2. Composition / ingredients information
Paint based on dispersion of synthetic resins (styrene-acrylic) in water. Dangerous components:
Nº CAS/Nº CE/Nº Índice
Concentration
112-07-2/203-933-2/607-038-00-2
2 % weight
Component
butyl glycol acetate
Clasification
EC Regulation
1272/2008
Acute Tox-4: H312+H332
Clasification
67/548/CEE
R20/21
3. Hazard Identification
Substance or mixture classification
Classification according to EC Regulation N.O. 1272/2008
Acute toxicity (dermal) Category 4-H312
Acute toxicity (inhalation) Category 4-H332
For the full text of those in this section H-statements, see Section 16.
Classification according to EU Directives 67/548 / EEC or 1999/45 / EC:
Harmful by inhalation and skin contact-Xn-R20/21
The full text of the R phrases mentioned in this Section, indicated in Section 16.
Pictograms:
No pictogram is required by not classifying into categories
4. First Aid
General advice: Wash before it dries with plenty of water.
After skin contact: Wash with plenty of water before it gets dry. Once it is dry, use special degreasing for eliminating
or have to use soaps medically approved solvents (medicinal liquid paraffin).
After eye contact: Wash with plenty of water. Go to eye doctor.
After swallowing: Drink plenty of water. Go to the doctor.
5. Fire-fighting measures
Correct extinguishing media: Water spray, dry extinguishing media, foam, carbon dioxide (CO2)
6. Measures Accidental release
Collect material before it dries, waste deposited in landfills
COMPOSAN INDUSTRIAL Y TECNOLOGÍA S.L. – Ctra. de Andalucía Km. 28,6 – Polígono Industrial Rompecubas c/
Narciso Monturiol s/n (28340 Valdemoro, Madrid)
Teléfono: 91.895.09.68 – Fax: 91.895.48.25 – www .composanindustrial.com
SAFETY DATA SHEET
Division
Page
Special products
2/3
Rev.: 1
January 2016
7. Manipulación y almacenamiento
Handling: Avoid contact with eyes and skin.
Storage: Store protected from frost and strong sun exposure.
8. Exposure controls / personal protection
Respiratory protection: Not necessary.
Eye protection: Not required.
Hand protection: gloves heat resistant protection. Skin
protection: suitable work clothes.
9. Physical and chemical properties
Appearance: Pasty.
Color: Variable: Red, grey, white.
Odour: Weak.
Boiling point: 100 ° C (water).
Melting point: 0 ° C (water).
Flash point: Not applicable.
Solubility in water: Miscible.
Density: Approx. 1.3 g / cm3
Viscosity: 2500-6500 mPa.s. (Brookfield RVT, spl.6,
100 rpm.)
10. Stability and reactivity
Thermal decomposition: No decomposition if used correctly. Avoid temperatures above 150 to which it can give
polymer decomposition may yield acrylic monomers. Dangerous reactions: No hazardous reactions if used
correctly.
11. Toxicological information
If appropriate manipulation, based on the experience of years, a harmful effect is not known. In case of prolonged
action are possible skin allergies and eye.
12. Ecological information
The product spilled in water can cause physical damage to the flora and fauna on contact.
13. Disposal considerations
It must be treated in accordance with local regulations. The dry residue can be disposed of in landfills.
14. Transport information
Product not hazardous according to criteria of transport regulations.
15. Regulatory information
No special labeling required under the provisions relating to the classification, packaging and labeling of dangerous
substances or preparations.
COMPOSAN INDUSTRIAL Y TECNOLOGÍA S.L. – Ctra. de Andalucía Km. 28,6 – Polígono Industrial Rompecubas c/
Narciso Monturiol s/n (28340 Valdemoro, Madrid)
Teléfono: 91.895.09.68 – Fax: 91.895.48.25 – www .composanindustrial.com
SAFETY DATA SHEET
Division
Page
Special products
3/3
Rev.: 1
January 2016
16. Información adicional
These data are based on our current knowledge. They describe our products from the point of view of safety
requirements, but are not intended to assure certain properties. The receiver of our product must observe, under its
responsibility, with current and relevant regulations.
Risk Phrases
H312
H332
Harmful in contact with skin
Harmful if inhaled
Hazard phrases:
R20/21
Harmful by inhalation and skin contact.
This information replaces all prior information. The specifications and technical data that appear on this sheet are only
guidelines corresponding to laboratory averages. Composan reserves the right to modify them without prior notice and
declines any responsibility for their wrongful use.
COMPOSAN INDUSTRIAL Y TECNOLOGÍA S.L. – Ctra. de Andalucía Km. 28,6 – Polígono Industrial Rompecubas c/
Narciso Monturiol s/n (28340 Valdemoro, Madrid)
Teléfono: 91.895.09.68 – Fax: 91.895.48.25 – www .composanindustrial.com