1. Sustance or preparation and company identification

SAFETY DATA SHEET
Division
Page
Special products
1/3
Rev.: 1
January 2016
1. Sustance or preparation and company identification
Sustante or preparation identification
COPSON® FIBRA
Company identification
COMPOSAN INDUSTRIAL Y TECNOLOGÍA S.L.
C/ Narciso Monturiol s/n, Polígono Industrial Rompecubas.
Valdemoro 28340. Madrid
Emergency telephone: 91 895 0968 ( during office hours )
2. Composition / ingredients information
Paint based on synthetic resins dispersion.
Paint based on synthetic resins dispersion (Styrene-acrylic) in water. Dangerous components:
Nº CAS/Nº CE/Nº Índice
Concentration
112-07-2/203-933-2/607-038-00-2
2% weight
Component
butyl glycol acetate
EC Classification
Regulation
1272/2008
Acute Tox-4: H312+H332
Classification
67/548/CEE
R20/21
3. Hazard identification
Classification of the substance or mixture
Classification under Regulation (EC) N.O. 1272/2008
Acute toxicity (dermal), Category 4-H312
Water toxicity (Inhalation), Category 4-H332
For the full text of those in this section H-statements, see Section 16.
Classification according to EU Directives 67/548 / EEC or 1999/45 / EC
Harmful by inhalation and in contact with skin-Xn-R20 / 21
The full text of the R phrases mentioned in this Section, indicated in Section
16..
Pictograms:
No pictogram is required by not classifying into
categories
4. First aid
General advice: Wash before it dries with plenty of water.
After skin contact: Wash before it dries with plenty of water. Once it get dry for disposal, They have to use special
degreasing soaps or medically approved solvents (medicinal liquid paraffin).
After eye contact: Wash with plenty of water. Go to eye doctor.
After ingestion: It is unlikely. Go to the doctor.
COMPOSAN INDUSTRIAL Y TECNOLOGÍA S.L. – Ctra. de Andalucía Km. 28,6 – Polígono Industrial Rompecubas
c/ Narciso Monturiol s/n (28340 Valdemoro, Madrid)
Teléfono: 91.895.09.68 – Fax: 91.895.48.25 – www .composanindustrial.com
SAFETY DATA SHEET
Division
Page
Special products
2/3
Rev.: 1
January 2016
5. Fire fighting measures
Extinguising Media : water spray, dry estinguising media, foam, carbon dioxide (CO2).
6. Measures Accidental release
Collect material before it dries, waste deposited in landfills.
7. Handling and storage
Handling: Avoid contact with eyes and skin.
Storage: Store protected from frost and strong sun exposure
8. Exposure controls / personal protection
Respiratory protection: Not necessary.
Eye protection: Safety glasses.
Hand protection: Protective gloves.
Skin protection: suitable work clothes.
9. Physical and chemical properties
Appearance: Pasty..
Color: Variable: Red, grey, white..
Odour: Weak.
Boiling point: 100 ° C (water).
Melting point: 0 ° C (water).
Flash point: Not applicable..
Solubility in water: Miscible.
Density: Aprox. 1.3 g/cm3.
Viscosity: 2500-6500 mPa.s. (Brookfield RVT, spl.6, 100 rpm.)
10. Stability and reactivity
Thermal decomposition: No decomposition if used correctly
Avoid temperatures above 150 which it can give polymer decomposition may yield acrylic monomers.
Dangerous reactions: No hazardous reactions if used correctly.
11. Toxicological information
If appropriate manipulation, based on the experience of years, a harmful effect is not known. In case of prolonged
action are possible skin and eye allergies.
12. Ecological information
The product spilled in water can cause physical damage to the flora and fauna by contact .
13. Disposal considerations
It must be treated in accordance with local regulations. The dry residue can be disposed of in landfills.
COMPOSAN INDUSTRIAL Y TECNOLOGÍA S.L. – Ctra. de Andalucía Km. 28,6 – Polígono Industrial Rompecubas
c/ Narciso Monturiol s/n (28340 Valdemoro, Madrid)
Teléfono: 91.895.09.68 – Fax: 91.895.48.25 – www .composanindustrial.com
SAFETY DATA SHEET
Division
Page
Special products
3/3
Rev.: 1
January 2016
14. Transport information
Product not hazardous according to criteria of transport regulations.
15. Regulatory information
No special labeling required under the provisions relating to the classification, packaging and labeling of dangerous
substances or preparations.
16. Additional information
These data are based on our current knowledge. They describe our products from the point of view of safety
requirements, but are not intended to assure certain properties. The receiver of our product must observe, under its
responsibility, with current and relevant regulations.
Risk Phrases
H312
H332
Harmful in contact with skin
Harmful if inhaled
Hazard phrases:
R20/21
Harmful by inhalation and skin contact.
Esta información sustituye a las anteriores. Las especificaciones y datos técnicos que aparecen en este folleto son de
carácter orientativo, correspondiendo a valores medios de laboratorio. Composan se reserva el derecho a modificarlos
sin previo aviso y deniega cualquier responsabilidad por un uso indebido.
COMPOSAN INDUSTRIAL Y TECNOLOGÍA S.L. – Ctra. de Andalucía Km. 28,6 – Polígono Industrial Rompecubas
c/ Narciso Monturiol s/n (28340 Valdemoro, Madrid)
Teléfono: 91.895.09.68 – Fax: 91.895.48.25 – www .composanindustrial.com