Price List - Norwood Sawmills
Transcription
Price List - Norwood Sawmills
PRICELIST 2016 1300-406-984 | NorwoodSawmills.com/au Pick Your Sawmill Decide which Norwood bandmill is right for you. Then, tailor your mill to match your sawmilling needs – Customize it with the combination of attachments that meet your unique wood-processing demands. It’s almost guaranteed that your milling operation will grow. Because you can add attachments anytime, now or ten years from now, your Norwood bandmill gives you flexibility to take on even bigger jobs down the line. LumberPro HD36 Portable Band Sawmill LumberMan MN26 Portable Band Sawmill LumberMate LM29 Portable Band Sawmill PortaMill PM14 Chainsaw Sawmill 2 Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money. LUMBERPRO HD36 Pro equipped with optional attachments LUMBERPRO HD36 - Engine Options Item No. Description Price HD36-PR023G LumberPro HD36 with 23hp (627cc) Briggs & Stratton V-Twin OHV electric-start engine $12500.00 1300-406-984 NorwoodSawmills.com/au 3 CUSTOMIZE YOUR HD36 MILL! LUMBERPRO HD36 - Manual Optional Attachments 4 Check out the catalog for more info! Pages 28-31 Item No. Description Price LM34-41150 Trailer/Support Jack Package (Set of 6) $2150.00 LM34-41170 Leveling Stands (Set of 10) (Additional 2 required for each 4-ft extension) $550.00 LM34-41130 4-Foot Bed Extension – Permanent $667.00 LM34-41140 2-Foot Bed Extension – Detachable $353.00 LM34-41400 Log Loading/Rolling & Ramp Package $1573.00 LM34-41285B Roller Toe Boards – Manual (Set of 2) $1283.00 41287 Board Offloading Rollers (Set of 4) $384.00 41289 Automatic Dogging Assist $213.00 41291 Log Rest Actuators (Set of 2) $568.00 41295 Rapid-Dogging & Rolling System (Set of 2) $899.00 LM34-DRRCRKIT Log-Dog/Log-Rest Receiver Set $69.00 41270-MK2 Lap Siding & Shingle Making Package $782.00 LM34-41290 Saw Carriage Cover (Norwood Orange) $379.00 LM34-41290G Saw Carriage Cover (Norwood Green) LM34-LS-94KIT Lumber Scale Magnets ( ⁄4”, ⁄4”, ⁄4” & ⁄8”) $71.50 LM34-LS-CMKIT Lumber Scale Magnets (5cm, 4cm & 2cm) $71.50 LM34-DSIND Quick-Click Indexing Detent Setworks – Indicator System $32.00 LM34-DS34S Quick-Click Indexing Detent Setworks – ¾” Detent Scale $37.00 LM34-DS64S Quick-Click Indexing Detent Setworks – 6⁄4” Detent Scale $37.00 LM34-DS84S Quick-Click© Indexing Detent Setworks – 8⁄4” Detent Scale $37.00 LM34-DS25MMS Quick-Click Indexing Detent Setworks – 1” (25mm) Detent Scale $37.00 9 6 5 $379.00 9 © © © © Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money. LUMBERPRO HD36 Check out the catalog for more info! Pages 32-33 LUMBERPRO HD36 - Hydraulic & Power Optional Attachments Item No. Description Price LM34-HD-P1 Hydraulic Pump System (Integrated Power) $3670.00 LM34-HD-P2 Hydraulic Pump System (Manual) $653.00 LM34-HD-41400 Hydraulic Log Loaders $2500.00 LM34-HD-41285 Hydraulic Roller Toe Boards (Set of 2) $1400.00 LM34-HD-41500 Hydraulic Log Turner $1817.00 LM34-HD-41600 Hydraulic Log Clamping System (2 Rests & 1 Dog) $3384.00 LM34-PSH-5000 Power Feed & Power Sawhead $4284.00 LM34-PSH-5010 Board Return $253.00 Power Feed & Power Sawhead Check out the catalog for more info! Page 36-37 LUMBERPRO HD36 - Bi-Metal Blades Ideal for Australian hardwoods, including iron bark. Can be re-sharpened up to 6 times. Width Pitch Quantity Dimensions Price 1.25” 1” $150.00 Each 167” x 1.25” x 0.042” LUMBERPRO HD36 - See Page 38-39 in the catalog Blade Maintenance Equipment Item No. Description Price 41180 Norwood Standard Sharpener $1173.00 41182 Norwood BladeMate Pro Sharpener $1712.00 41190 Norwood Tooth Setter $696.00 1300-406-984 LUMBERPRO HD36 - Spare Parts Kits See Page 45 in the catalog Item No. Description Price HD36-41300 Spare Parts Kit (Drive & Idler belts (x1) & Ceramics set (x1) $199.00 ENGP-KIT23BS Engine Parts Kit (for 16hp and 23hp Briggs) $63.00 ENGA-DRN-BRIGGS Quick-Drain Oil Valve (for 16hp and 23hp Briggs) $49.00 NorwoodSawmills.com/au 5 LM29 AND MN26 Optional Attachments & Accessories LM29 equipped with optional attachments. Check out the catalog for more info! Pages 18-19 LUMBERMAN MN26 - Engine Options Item No. Description Price MN26-0013G LumberMan MN26 with 13hp (420cc) Briggs & Stratton recoil start gas engine $6997.00 LUMBERMATE LM29 - Engine Options Item No. Description LM29-0016G 6 LumberMate LM29 with 16hp (479cc) Briggs & Stratton V-Twin OVH electric start engine Price $8997.00 Item No. Description Price ML26-41150 Trailer/Support Leg Package (Set of 8) $2840.00 ML26-41150B $553.00 ML26-41130 Leveling Stands (Set of 10) (Additional 2 required for each 4-ft extension) 4-Foot Bed Extension ML26-41400 Log Loading/Rolling & Ramp Package $1283.00 ML26-41285B Roller Toe Boards – Manual (Set of 2) $1097.00 41287 Board Offloading Rollers (Set of 4) $384.00 41295 Rapid-Dogging & Rolling System (Set of 2) $810.00 ML26-CD01 Cam Dog Kit (Set of 1) $66.00 41270-MK2 Lap Siding & Shingle Making Package $782.00 ML26-41290 Saw Carriage Cover (Norwood Orange) (for LM29 only) $342.00 ML26-41290G Saw Carriage Cover (Norwood Green) (for LM29 only) $342.00 MILL-BGCRK Dura-Guide Ceramic Blade Guide Retrofit Kit $427.00 MILL-WLKIT Auto-Blade Lube System $141.00 Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money. $270.00 LUMBERMAN MN26 & LUMBERMATE LM29 Check out the catalog for more info! Page 36-37 LM29 - Bi-Metal Blades Ideal for Australian hardwoods, including iron bark. Can be re-sharpened up to 6 times. Width Pitch Quantity Dimensions 1.25” 1” Each Price 144” x 1.25” x 0.042” $119.00 LM29 AND MN26 Blade Maintenance Equipment LM29 AND MN26 - Spare Parts Kits Check out the catalog for more info! Page 38-39 Item No. Description Price 41180 41182 41190 $1173.00 $1712.00 $696.00 Norwood Standard Sharpener Norwood BladeMate Pro Sharpener Norwood Tooth Setter Check out the catalog for more info! Page 45 Item No. Description Price LM29-41300 ENGP-KIT13BS ENGP-KIT23BS ENGA-DRN-BRIGGS Spare Parts Kit (Drive & Idler belts (x1) & 1¼” Blade-guide roller (x1)) Engine Parts Kit (for 13hp Briggs) Engine Parts Kit (for 16hp Briggs) Quick Drain Oil Valve (for 16hp Briggs) $199.00 $57.00 $63.00 $49.00 Sawmills equipped with optional attachments. 1300-406-984 NorwoodSawmills.com/au 7 PORTAMILL PM14 PortaMill equipped with optional oiler kit *Ladder + chainsaw not included. PORTAMILL 8 Check out the catalog for more info! Pages 12-13 Item No. Description Price PM01 PortaMill* $1350.00 PM02 Auxiliary Chain & Bar Oiler Kit $127.00 PM14-BUNKKIT Cross Bunk Kit (includes supplementary bunk & log clamping set) $246.00 Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money. USEFUL TOOLS USEFUL TOOLS Check out the catalog for more info! Page 44 Item No. Description Price 41240 Log Wizard $350.00 y, we’ll also send you your When you order your Norwood band sawmill toda FREE Norwood “Owner’s Edition” hat Only for Norwood Owners, this special-edition cap isn’t 1300-406-984 Log Wizard available to the general public. NorwoodSawmills.com/au 9 QUALITY-BUILT FOR THE LONG HAUL When you invest in a Norwood, you can be sure it was quality-built in the U.S.A. and Canada. Every component of every Norwood sawmill is made of top-quality steel by highly-trained, highly-skilled operators with cutting-edge fabrication and machining technologies. You might hear other companies claim the same thing, but they only package their mills here out of inferior parts imported from China, Taiwan or Poland. Sawmills take a beating – They have to handle heavy logs, and cut accurate lumber in tough conditions. When the chips are down, you want a mill that can stand up to the challenge. Don’t trust your milling operation to an offshore import made by low-paid, unskilled workers, no matter how cheap the price – If they can’t get the job done, they’re worthless. Norwood sawmills are built to cut hundreds of thousands, even millions, of board feet, day-in and day-out. Simply put, every Norwood is built for the long-haul. Ordering in Australia is Easy … 1. CHOOSE YOUR EQUIPMENT – Pick the mill that’s right for you, then accessorize it to meet your exact needs. 2. CHOOSE HOW YOU WANT TO RECEIVE IT – Shipped right to your door, or you can pick-up at a Norwood Australian outlet. 3. CALL TOLL-FREE at 1300-406-984 for a quote and to place your order. LOW FREIGHT COSTS FREE CONSULTATION Your Norwood can be shipped right to your front door for a lot less than you think – usually just a few hundred dollars*. That’s because every Norwood mill is compactly packaged in kit-form on a single pallet – so you don’t pay to ship air! Freight can be made cheaper if you pick up from your local depot. Speak with one of Norwood’s factory-trained specialists for a free consultation about your sawmilling and log harvesting needs. They can also get you a complete quote, including shipping right to your door. When you call Norwood Australia TOLL-FREE 1300-406-984 for your no-obligation sawmill quote, our on-staff shipping specialists will immediately launch a competition among our carriers to secure you the lowest freight price – it can be as little as a couple hundred dollars! Want all the numbers? Once you call, you can have your complete sawmill quote, including shipping, in as little as an hour. IN STOCK! GET STARTED TODAY CALL TOLL-FREE 1300-406-984 from anywhere in Australia, Monday through Friday between 9:00 a.m. – 5:00 p.m. SETTING UP YOUR MILL Building and setting up your mill isn’t rocket science – Most owners handle it in a weekend. And you’ve probably already got all the tools you need: Combination and allen wrenches, phillips screwdriver, ratchet wrench with set of sockets, grease gun, adjustable wrench. As we are the distributor, we carry a lot of Norwood equipment in stock for immediate availability. If what you want we do not have in stock, we can easily order it in for you; there is an approximate 6-8 week turn around time and a deposit must be paid. If you can use these tools, you’ve got all that’s needed to assemble a Norwood. To help you put it together, we give you a fully illustrated manual that leads you, step-by-step, through the whole process. It’s packed with exploded diagrams, cutaways, photographs and checklists – all written in plain English. And we back it up with unlimited toll-free support – from the moment your Norwood arrives, through the first trial cuts, through to full production and beyond. TO GET YOUR NORWOOD ON THE ROAD If you need onsite help to set up your mill, we can arrange this for you. A set up fee and the cost of travel of our staff member will have to be incurred by the customer. CALL TOLL-FREE 1300-406-984 from anywhere in the Australia, Monday through Friday between 9:00 a.m. – 5:00 p.m. Or email [email protected] “The LumberMate does everything Norwood said it would do. It went together perfectly and arrived in excellent condition.” – Scott Boydston, Hawaii 10 Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money. HOW TO RECEIVE YOUR ORDER Shipment in Australia: Your Norwood order can be delivered to your residence or business. You must have access to machinery that can receive the shipment off the truck, i.e. a forklift or tractor. Alternatively, have it delivered to your nearest depot. When having your item delivered to your home or business, Norwood band sawmills and oversize orders ship by common-carrier freight truck so it’s important that your delivery address is easily accessible to a tractor-trailer. We are also happy to ship to your closest depot to keep shipping costs down. You or your designated agent must be present to accept the order and off-load it. If no one is at the delivery address to accept the order, re-delivery and storage charges may apply. Upon placing your order, please ensure all your contact details are complete and correct so that, if the carrier needs to contact you, they are able to do so swiftly. Pick-Up within Australia If you would like to pick-up your sawmill or forestry equipment order direct from Norwood’s distributor factory in Sydney, please call us tollfree at 1300-406-984 three(3) business days in advance so that we can have your order ready. You will need a pick-up truck, full-size van or enclosed trailer to pick up your sawmill or oversized order. Shipment outside Australia We can ship Norwood sawmills anywhere in Australia from Norwood’s distributor factory in Sydney, Australia. Norwood sawmills are milling lumber in over 100 countries worldwide. Because Norwood dedicates experienced staff solely to processing international sawmill orders, shipments to international destinations are handled professionally, quickly and smoothly. If you’re outside Australia, please feel free to contact Norwood at +1-705-689-2800 or [email protected] and we will arrange to ship your order to your nearest port. Important: To ensure that you receive the best possible value, Norwood ships all equipment in knock-down form with step-by-step assembly instructions and detailed illustrations, exploded views and photos. PAYMENT OPTIONS Please note: All orders are to be prepaid in full prior to shipping. Important: All orders are shipped prepaid, which means that the shipping charges are paid at the time of your order. In all cases, before signing for the shipment (by signing the freight waybill or packing slip), please check your order carefully upon delivery to ensure that you receive all pieces & boxes listed on your packing slip and that they are in good order. Note missing or damaged pieces on the freight waybill before signing. Any claims not reported in writing on the freight waybill at the time of delivery become the sole responsibility of the purchaser; failure to report missing or damaged pieces & boxes in writing on the freight waybill at the time of delivery nullifies your insurance and precludes any subsequent claims. Disclaimer: Specifications, designs, descriptions, illustrative material and prices on our website and in our literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories and may not include all standard equipment. Our website and our literature have been compiled for worldwide circulation; while general information, pictures and descriptions are provided, some illustrations and text may include product features, options and accessories not available in all regions. The color orange as it relates to sawmills, edgers, skidders & related equipment is a registered trademark owned by Norwood Industries Inc. (“Norwood”) in multiple jurisdictions. The trade-names Norwood®, LumberPro®, LumberMate®, LumberMan®, LumberLite®, PortaMill®, SkidMate®, BladeMate®, Sabretooth® & MultiMate® are registered trademarks owned by Norwood in multiple jurisdictions. Functional & design elements of Norwood sawmills and log handling equipment are protected by registered patents & pending patents in multiple jurisdictions. 1300-406-984 NorwoodSawmills.com/au 11 HOW TO CONTACT US: Call TOLL FREE at 1300-406-984 SYDNEY AUSTRALIA Warehouse from anywhere in Australia Monday to Friday between 9:00 a.m. – 5:00 p.m. Unit 51 51 Leighton Pl Hornsby NSW, 2077 Visit online at Outside of Australia www.NorwoodSawmills.com/au E-mail at [email protected] SF AN S TAT I 100% AC TEED FOLLOW NORWOOD TO GET THE LATEST NEWS. TION GUA 2 R We know that you will be 100% satisfied with the value and performance of your Norwood equipment. We back that up with a 30-day money-back guarantee. If your Norwood equipment doesn’t do everything we say, simply return it to us within 30 days and receive a refund (shipping not included). We’re so convinced of the quality and durability of the Norwood LumberMate and LumberLite band sawmills that we will repair or replace, at our discretion, any part returned to us and found to be defective through manufacturing within the first two years of the original purchaser’s ownership (except consumable items such as belts, blades, hoses etc.). Norwood offers a one-year limited warranty on most other equipment. Engines are covered by a 2-year warranty directly with the engine manufacturer. Form NWPL (E)01/16 Call +1-705-689-2800 Monday through Friday between 8:30 a.m. – 4:30 p.m. EST. [email protected]
Similar documents
800-567-0404 | NorwoodSawmills.com
Leveling Stands (Set of 10) (Additional 2 required for each 4-ft extension) 4-Foot Bed Extension
More information