steel rule - Wagner Die Supply

Transcription

Wagner Die Supply
®
Diemaking & Diecutting Source and Resource
SUPPLIES FOR THE
STEEL RULE DIE INDUSTRY
www.wagnerdiesupply.com
ONTARIO, CA • TACOMA, WA • DALLAS, TX • ELMHURST, IL
CONTENTS
Section
Pages
Product Group
1-2
WAGNER PUNCHES
3-6
STEEL R ULE
7-10
DIER OO M SUPPLIES
11-12
EJECTION M AT ER IALS
13
CR EA SING M ATRIX
14-15
DIEC UTTI NG & M AKER EAD Y
16
DIERO OM EQU IPM ENT
17
HEN DERSON STOR AGE SYSTEM S
WAGNER DIE SUPPLY ACCEPTS:
A B O U T W A G N E R D I E S U P P LY A N D
OUR
Download a printable PDF format credit card
approval form from our website at:
http://www.wagnerdiesupply.com/creditcardappr.html
Or call us at (800) 423-4478 and request that one
be sent to you by fax or mail.
CREDIT ACCOUNTS:
Terms: Net 30 days.
Minimum order: $50.00
Returned checks will be charged $30.00
To establish a credit account with Wagner Die
Supply, download a credit application from our
website at:
http://www.wagnerdiesupply.com/creditapp.html
Or call us at (800) 423-4478 and request that one
be sent to you by fax or mail.
OVERAGE POLICY:
On custom-made products Wagner Die Supply
reserves the right to ship up to a 10% overage.
Your Wagner Die Supply customer service
representative can answer any questions you
might have regarding our overage policy.
© 2016 Wagner Die Supply
PHILOSOPHY
Since 1947, Wagner has focused on providing customers
with the best in quality and service. That’s what our Valu-Edge
philosophy is all about – we provide our customers with more
than just great supplies and equipment, we back up our
products with the best in service and technical support
in the industry.
This catalog is only a sampling of the wide variety
of products we carry. Please contact us or visit our
website for complete product information.
800-423-4478 toll-free
PROUD TO BE ASSOCIATED WITH:
WAGNER PUNCHES
A leader in punch manufacturing since 1947, Wagner Punches have
always been manufactured in the U.S.A. under stringent quality
standards. Wagner punches feature our industry-exclusive
Enduro CBN™ heat treating process. Wagner makes a wide variety
of in-stock punches and has the capability to produce just about any type
of custom punch imaginable, using our expertise and state-of-the-art
CNC machining. Wagner punches are also identity-etched for easy
identification and accurate reordering. For a complete listing of Wagner
punches please contact us, or refer to the Wagner Punch Catalog,
available on-line at www.wagnerdiesupply.com.
Seamless Tube Punches
Standard Tube with
Ejectors
Standard Tube with
Spring
007 Straight Cut featuring minimum
support bevel
Special Base
Oval Tube
Square Tube with
and without Spring
Outside Diameter
Relieved
Inside Diameter
Relieved (cut-away
view shown)
Notched Tube
Straight O.D.
Cross Cuts
Cup Punches
ONTARIO, CA
•
TACOMA, WA
Available in I.B. or C.B.
Inside-Inside Bevel
Rotary Serrated
Pin Points
Washer Sets
Rotary Serrated -
•
DALLAS, TX
•
E L M H U R S T, I L
1
WAGNER PUNCHES
Seamless Hangers
Feed Thru
Feed Thru Ovals
Serrated Feed Thru
Heavy Wall
Feed Thru
Clicker style Feed
Thru
Self-Cleaning -
Self-Cleaning with
No-Turn Pin
Self-Cleaning
Serrated
Self-Cleaning
Squares
Standard, Knurled and
Kleen Cut™
Rule Connectors
Self-Cleaning Ovals
Custom-milled Punches
Micrometer Adapter for measuring rule and
punch heights up to 1”.
Custom-milled punches - designed and manufactured to customer
specifications (materials and applications).
Contact us or visit www.wagnerdiesupply.com for the latest information!
2
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
STEEL RULE
Thickness:
1 PT
1-1/2 PT
.014” (0.36 mm)
.021” (0.53 mm)
2 PT
3 PT
.028” (0.71 mm)
4 PT
.042” (1.07 mm)
6 PT
.056” (1.42 mm)
8 PT
.084” (2.13 mm)
.112” (2.84 mm)
Cutting Rule Profiles available in ground or shaved edge in several bevel angles.
Known as:
Center Bevel
Single Bevel
Long Center Bevel
Typical uses:
Center Bevel, Standard Bevel, Double
Bevel, Center Face or A Bevel.
This is by far the most popular bevel for
conventional paperboard cutting.
Approximately 85% of all paperboard cutting is done with a Center Bevel rule.
Side Bevel, Single Bevel, Side Face,
B Bevel or Flush Bevel
Single Bevel rule produces a square
finish. It’s also used to produce tighter bends,
compared to Center Bevel rule.
Long Center Bevel, Double Double Bevel,
Center Face Double Bevel,Facet Bevel or
AA Bevel
This rule is especially effective when
cutting hard and/or thick materials.
It helps reduce cutting pressure by deflecting
pressure with the first bevel supported by the
second bevel.
Standard length of Bevel: 2 pt. - 1/8” long
3 pt. - 3/16” long, 4 pt. - 1/8” or 3/16” long
Long Single Bevel
Long Side Bevel, Long Single Bevel,
Side Face Double Bevel, Side Facet Bevel
or BB Bevel.
Standard length of Bevel: 2 pt. - 1/8” long
3 pt. - 3/16” long, 4 pt. - 1/8” or 3/16” long
Also used for cutting thicker and/or
harder materials. The long Single Bevel design
reduces the crush to the finish die cut product
when the bevel faces away from the piece.
Creasing Rule Profiles designed to make an impression in the die cut product for folding.
2 PT body with a 3
or 4 PT top
2 PT and 3 PT
Standard Double
Round
3 PT body with a
4 , 6 or 8 PT top
2 PT body with a
1 or 1.5 PT top
4, 6 and 8 PT
Single Round
4 PT body with a
6 or 8 PT top
Other creasing rule profiles are available, like Tru-Fold, Positive Score and MicroTrak.
Perforating Rule available from 2 teeth per inch to 100 teeth per inch (TPI).
3/32” tooth x 1/32” space
2 teeth per inch
6 teeth per inch
12 teeth per inch
Above is a limited sample of typical tooth and space configurations, many other configurations are available from our extensive inventory.
Wave Rule available in edge wave or full body wave, depending on wave required.
Medium fine edge wave
Corrugated edge wave
Medium angle full body wave
Patterns are not actual size, contact Wagner Die Supply for a full listing of exact sizes and styles.
Tear Edge also known as zipper rule.
Pattern is not actual size, contact Wagner Die Supply for a full listing of sizes and styles.
Rotary & Serrated Rule used in cylinder and flat bed cutting.
Rotary rule available in 8, 10, 12 and 13 serrated teeth per inch in curved and straight styles.
Serrated rule is designed for cutting foams, films and other materials that are difficult to cut.
Available in a wide variety of teeth per inch configurations.
Contact Wagner Die Supply for a complete listing of National Steel Rule products.
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
3
STEEL RULE
C
Cutting Rule Manufacturers and their products
with specifications and applications.
A
B
Edge Hardened, Softer Body
Through Hardened
Refer to “Hardness” column for individual (HRC) Rockwell readings.
Manufacturer
Product
Hardness
Special Characteristics
Product Application
Top
H-75
Universal
Universal 40
Universal 60
Universal 75
Extra
Supreme
Tinit
Label-X
Plast-X
X-Press
A = 45 HRC
A = 51 HRC
B = 35 HRC, C = 57 HRC
B = 40 HRC, C = 57 HRC
B = 45 HRC, C = 57 HRC
B = 51 HRC, C = 58 HRC
B = 40 HRC, C = 59 HRC
Universal, Universal 60
Universal
B = 45 HRC, C = 58 HRC
B = 35 HRC, C = 53 HRC
B = 35 HRC, C = 57 HRC
- Special coating, low-dust
- Tin coated, Long life
- Designed for labels
- Designed for plastics
- Self-levelling
- Cardboard, corrugated, labels.
- Gaskets, rubber, cork, felt.
- Plastics, thin gaskets, foils.
- Metal foils, gaskets, plastics.
- Gaskets, plastics, composites.
- Labels, dust control.
- Long die life.
- Label cutting, foils, films.
- Plastics, PET, PE, PP, PVC, foils.
- Solid board, corrugated.
TopDurFlex®
TopDurFlex S®
Special 60W
TIN
Brilliant
B = 35 HRC, C = 53 HRC
- Shaved edge rule
- Ground rule, edge hardened
- Micro-ground rule
- Tin coated
- Hardened tip, slim bevel
- Cardboard, labels, corrugated.
- Coated materials, foils.
- Fast food, pharmaceutical.
- Coated boards, foils, plastics.
Helmold 65 Ultraflex
Helmold 70
Helmold 80
Helmold 85
Helmold Lazer Blade
Helmold Lazer Blade H
Helmold Lazer Blade D
Helmold Lazer Blade HD
A = 45 HRC
A = 50 HRC
A = 54 HRC
A = 58 HRC
B = 34 HRC, C = 57 HRC
B = 45 HRC, C = 57 HRC
B = 34 HRC, C = 57 HRC
B = 34 HRC, C = 57 HRC
- All purpose utility rule
- Hard rule, longer runs
- 80S and 80M for long life
- Straight work
- Edge hardened
- Extra deep edge hardened
- Extra deep edge hardened
- Packaging, kiss-cut, folding carton.
- Abrasive materials
- Abrasive materials
HP 34
HP 40
HP 44
HP 51
MM 40
MM 44
MM 52
Supra Z
B = 34 HRC, C = 60 HRC
B = 39 HRC, C = 67 HRC
B = 46 HRC, C = 61 HRC
B = 51 HRC, C = 61 HRC
A = 40 HRC
A = 44 HRC
A = 52 HRC
B = 40 HRC, C = 60 HRC
- Plasma beam hardened
- Fine ground edge bevel
- Recycled and virgin paperboard.
- Recycled and virgin paperboard.
- Paperboard, corrugated.
- Plastic, blister, laminated boards, labels.
Premium
Nataloy
Nataloy EH
B = 38 HRC, C = 54 HRC
A = 41-44 HRC
- Induction hardened edge
- Shaved or ground edge
- Edge hardened
- Solid fiber and corrugated.
- Corrugated
- Corrugated, folding carton.
Coil Direction Information for Auto Benders & Rule Processors:
Bevel is always on top!
Coil Ends on the
Coil Ends on the
Coil Direction: Anti-Clockwise
Manufacturer
Right
Left
Anti-Clockwise
Clockwise
RU - Anti-Clockwise
R - Clockwise
Anti-Clockwise
Clockwise
Anti-Clockwise
R - Clockwise
AC (21” O.D.), AB (18-3/8” O.D.)
DP (21” O.D.) , KX (18-3/8” O.D.)
Customer Specified.
Customer Specified.
RU
Note: Rules are also available in Dispenser Coils
that are wound in a clockwise direction.
Coil Direction: Clockwise
(or Counter-Clockwise)
Wagner refers to Anti-Clockwise as “AB” or “RW” for reverse wound.
WARNING: Dispenser Coils should never be used to load automated benders.
More Steel Rule next page...
4
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
STEEL RULE
Creasing Rule
Manufacturer
Product
Hardness / Details
Product Application
- Recommended on rules 3 pt. and less.
- Recommended on rules 4 pt. and greater.
Bohlerstrip HT
Bohlerstrip HR
A = 39 HRC
- Hardened and tempered
- Hard rolled
Creasing Rule
Laser Crease
Facet Creasing Rule
P-Crease Rule
Double Creasing Rule
Half Crease Rule
-
Creasing Rule
Reverse Laser Crease
1.5 pt. A = 45 HRC, 2 - 3 pt. A = 40 HRC, 4 - 6 pt. A = 35 HRC
- Single Round (SR) or Double Round (DR).
- Wider scoring edge using a 2 pt. die slot.
Standard Creasing Rule
Tapered Creasing Rule
Standard Creasing Rule HW
Heavy Top Creasing Rule
-
- HW hardness achieved through cold-rolling.
-
Rotary Laser Crease
Tru Fold Laser Crease
MicroTrak Crease
I-Crease
Wave Score
Duo-Score
MicroTrak Laser Crease
-
- MicroTrak can be added to creasing rules.
-
Cut-Crease, Wave, Tear Edge, Zipper & Stripping Rules
Manufacturer
Product
Top & Universal Cut-Crease
Top & Universal Glue Flap
Top & Universal Wave Edge
& Deckle Edge Rules
Top 36 Zipper Edge Rules
Top 36 Stripping Rules
Top 36 Sure-Strip
Manufacturer
Details
Characteristics
Product Application
- Bevels: CF, CFDDB
- Bevels: CF
- Bevels: CF, CFDB
- 2, 3, 4 pt.
- 2 pt.
- 2, 3 pt.
- HS - cutting part height,HR - creasing part height.
- Used to prep cardboard for adhesive.
- For production of safety cutting edges on corrugated.
- Bevel: CF
- Flat top
- Bevel: CF
- 2, 3 pt.
- 3 pt.
- 3 pt.
- Tear open solution for shelf-ready packaging.
- Used for ejecting waste material after diecutting.
- Used for ejecting waste material after diecutting.
Combination Cut and
Crease Rule
Wave Rule
Steel Spacing Leads
Tear Edge (Zipper) Rule
- 1.5, 2, 3, 4 pt.
- 1, 1.5, 2, 3, 4, 6 pt.
- 8” lengths, 2 pt. body
Product
Product
Product
Crease/Cutting Rule
with Flat Crease
Crease/Cutting Rule
with Round Crease
Speedi Products
Glue Flap Rule
Zipper Rule
Tissue Perforating Rule
Stripping Rule
Esopick Stripping Rule
Stripping Rule with Perf
Speed Stripping Rule
Waved Stripping Rule
Waved Esopick Rule
Waved Stripping Rule
with Perf
MM44 Combination
Cut/Crease Rule
HW Spacing Rule
HW, MM34, MM40
Stripping Rule
MM40, HP40
Wave Edge Rule
MM44 Glue Flap Rule
MM34 Zipper Rule
Combination Cut/Crease
Radius Gullet Combination
Cut Crease Rule
Platinum Combo Score
Bundle Breaker Rule
PERFormaX Rule
8-Tooth EZ Strip Rule
10-Tooth Prenick Rule
Tear Edge (Zipper) Rule
- 1.5, 2, 3, 4 pt.
More Steel Rule next page...
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
5
STEEL RULE
Perforating Rule
Manufacturer
Product
Hardness
A = 45 HRC
B = 35 HRC, C = 57 HRC
Top
Universal
Heights
Product Application
- 2, 3, 4 pt.
- 2, 3, 4 pt.
- Bevels: CF, CFDDB
- Bevels: CF, CFDDB
Perforating Rule
Asymmetrical Perf Rules
Special-Micro Perf Rules
- Bevels: CB
- Bevels: CB, LCB, SB, ISB
- Bevels: LCB
Perforating Rule
A = 50 - 70 HRC
- 1.5, 2, 3, 4 pt. - A wide range of tooth configurations for the corrugated, folding carton and business form industries.
MM44
HP40
A = 40 HRC
B = 39 HRC, C = 67 HRC
- 2, 3, 4 pt.
- 2, 3, 4 pt.
- All common tooth/gap configurations available.
- Serrated perf recommended for tooth sizes above 1/4”
- Alternative to serrated perf.
- Used in business forms, fine perf rule.
- Ultra-fine
Rotary Perforating Rule
Prism Perf
Micro-Perf
Invisible Perf
Rotary Rule Cutting Rule
Product
12 Tooth
10 Tooth
8 Tooth
Euro-Cut
10 Tooth Euro-Cut
12 Toto Euro-Cut
Kleen Kut
10 Tooth Kleen Kut
13 Tooth Kleen Kut
Scalloped
16 Tooth
20 Tooth
SuperCut
Extreme 9
Super Six
Arrowhead
10 Tooth Arrowhead
RP8
10 Tooth NZ Style Klean Kut
13 Tooth Shallow Profile
14 Tooth Shallow Profile
12 Tooth
8 Tooth
20 Tooth
Kleen Kut
Product Application
- Shaved edge.
- Shaved bevel
- Shaved bevel, “V” ground teeth
- Shaved edge, edge hardened
- Hard alloy steel, unique bevel
- Hard alloy steel, shallow gullet
- Edge hardened, shallow gullet
- Center bevel, edge hardened
- Available symmetrically ground
- Edge hardened or standard
- Multi-purpose, avail. in 10 tooth
- Teeth slant at a downward angle
- Ground from one side
- Long shaved bevel, edge hardened
- Symmetrical ground, hardened edge
- Symmetrical ground, shallow gullet
- Side bevel, shallow gullet
- Radius tooth, hardened edge
- Center bevel, ground on one side
- Minimizes dust, cuts a wide variety of materials.
- Reduces edge crush, can be edge hardened.
- Cuts with minimal pressure.
- Cuts with reduced penetration, saves die rubber.
- Minimal penetration, increases blank & anvil life.
- Excellent for E Flutes and other light grade board.
- Excellent for lead edge knife, or long horizontal cuts.
- Low cutting pressure, good on plastic corrugated.
- Excellent on plastics and micro flute corrugated.
- Excellent for cutting rubber, fiber and plastics.
- Excellent for displays or for a superior edge.
- Good for cutting light board and micro flutes.
- Creates a safety edge, provides excellent anvil life.
- Cuts heavy board. For long, across the cylinder cuts.
- Improves stripping and cuts with less pressure.
- Reduces edge crush, perfect for power flute.
- Longer anvil life,for medium to lighter board weights.
- Longer production runs, excellent bendability.
- Perfect for difficult scrap areas, improves anvil life.
- Ideal for flat applications.
- Cuts with minimal pressure, good for fabrics, rubber.
Extreme 9
National Rotary Rule - General Coil Information:
Bevel is always on the outside.
Coil Ends on the
Coil Ends on the
Left
Right
Reverse Wound
Curved Rule
Standard Wound
Curved Rule
Coil Direction: Anti-Clockwise
(or Counter-Clockwise)
Coil Direction: Clockwise
AC (21” O.D.), AB (18-3/8” O.D.)
DP (21” O.D.) , KX (18-3/8” O.D.)
Wagner refers to Anti-Clockwise as “AB” or “RW” for reverse wound.
Counter-Clockwise
6
ONTARIO, CA
Clockwise
•
TACOMA, WA
•
DALLAS, TX
•
DIE ROOM SUPPLIES
Dieboard - Flat & Rotary - Flat - available in Birch & Maple;
Rotary available in Maple, Mixed Core & Dura Core.
Many sizes & styles available, contact us for more information.
Router Bits -
G-Lam Adhesive -
for diemakers using routers.
Use Wagner ColletCare for
cleaning, lubricating and
protecting spindles.
Specially-formulated for
laminating two 5/16”
routed dieboards before
knifing.
Retractable Pins -
Registration Pins -
Pocket Scribes -
Nicking Chisel -
Used in blister packaging
for registration, made of
aluminum.
Close tolerance retractable
pins, 1/8”, 5/32”, 3/16” &
1/4” sizes available, used on
progressive dies.
#81 - 3/8” dia., #83 - 1/4”
dia., #88 - Carbide point
with pocket clip.
Inexpensive way to nick
or increase nick width,
complete with three tips
.020, .030 and .040.
Quicknick Grinders -
Dumore Grinder -
Dremel® 100 Series -
Grinding Wheels -
In 110V, 220V or pneumatic versions.
Model #10-351 22,000 RPM
max, uses #39 mandrel.
35,000 RPM single speed
grider, uses #409, #420 &
#426 grinding discs.
Rubber-bonded or
reinforced wheels in
various thicknesses.
Kevlar® Gloves -
Jig Saw Blades -
Diemaker’s Apron -
Safety gloves - ideal for
handling and ruling dies.
For Richards, Laborsaber,
Sandvik, Sabermatic and
Cutawl.
Saves wear and tear on
clothing, handy pocket on
front for scribes and pens.
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
7
DIE ROOM SUPPLIES
Extractor 2000 -
Pneumatic Rule Puller -
Bar-Plate Rule Puller -
Channellock Pullers -
The safe way to pull rule,
designed and manufactured
by Wagner Die Supply in the
USA (see page 16).
The 50-0 and 50-0-HD units
pull rule using pneumatically
operated pins to provide
lifting power.
Lifts rule as close as 1/4”
apart.
7”, 8”, 10” & 14” sizes.
Elastomer Mallets -
Red Urethane Mallets -
Urethane Mallets -
Urethane Mallets -
#4, #4L - 2” dia. head, #5,
#6, #6L - 2-3/4” dia. head.
Two styles available:
#4L - 2” dia. x 5-1/8” L,
#6 - 2-3/4” dia. x 4-3/4” L.
These will replace orange
Urethane mallets.
#4, #2x5 - 1-7/8” dia. head
#5 - 2-1/2” dia. head.
#4, #2x5 - 1-7/8” dia. head
#5 - 2-1/2” dia. head.
Rawhide Mallets -
Rule Setter & Tamper-
Rule Tweaker -
Multi-Cutter -
#3 - 1-3/4” dia. head
#4 - 2” dia. head
#5 & #6 - 2-3/4” dia. head
#5 Long Handle
Designed by Bar-Plate for
working on rule on the die,
perfect for setting and
adjusting rule.
Available in either 2 or 3 pt.
versions from Bar-Plate.
Cuts rubber and nonmetallic matrix, with spare
blades and anvil.
Hand Rule Cutter -
Super Sharpener -
Corrugated Fasteners
Air Fastener Gun -
Cuts 2 & 3 pt. rules.
For spot sharpening of rule
on dies, includes safety
shield*.
3/8” and 1/2” sizes, setting
tool available.
Used for installing
corrugated fasteners.
* Designed for sharpening dies which cut into a cutting pad.
8
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
DIE ROOM SUPPLIES
Pinch Dogs -
Die Bolts -
Speed Mount Washer
T-Nuts -
Holds 2 pieces of dieboard
together temporarily.
1/4” x 1-1/8”, 5/16” x
1-1/8”, 5/16” x 1-3/8” sizes
and Hamada style.
Exclusively designed for
rotary dies.
Available in both standard
and metric sizes.
Medium = 1/2”*
Large = 3/4”*
Coil Keepers -
* Height of Perfed
Characters.
Small = 3/8”*
Type Perf - 3/4”, 1/2” or 3/8” tall type available, with many
styles of tracks for each size. Characters include the upper case
alphabet, numbers 0-9, slash and recycled logo.
Specially designed hook &
loop fasteners that keep
steel rule coils secure.
Rotary Hoops -
Rotary Hoops -
Die Matte Film -
Carbon Paper -
Rotary hoops, doubletaper design, 4 sizes.
Precision rotary hoops for
Martin® Posi-lock® System,
4 sizes.
Matte/frosted on one side,
.003 - .005 in a variety of roll
widths & lengths.
available in various sizes.
BridgeSavers™ -
Rule Guards -
4-Way Hardware -
LeGard -
Help maintain alignment
on rotary dies.
Adjustable slot for 2” to
3” hole spacing, 1/4” and
5/16” widths available.
Lead edge knife brace for
rotary dies, reduces lead
knife failure.
Wagner can supply parts and
components for EVOL dies.
Surface mounted, helps
corrugated from cracking,
available in 2 sizes.
ONTARIO, CA
We’re your Source and Resource,
always working to improve our
product line, and you can help!
If you don’t see something you need,
contact us, let us know about it and
we’ll do our best to locate it for you.
Parts for EVOL Dies -
Shoulder Flex 2 -
•
TACOMA, WA
BridgeSaver™ added to the
rule near the join line
enhances rule grip & die life.
•
DALLAS, TX
•
9
DIE ROOM SUPPLIES
Stripping Pins -
Stripping Claws -
Spring Pins -
Inca Nails -
50 mm long, flat, single
point and multi-point.
Right and left versions, in
various widths, 50 mm in
length.
2” long, used as stripping
pins.
50 mm long stripping pins.
Speed Bars -
Stackers -
Female Clamping Jaws
Distance Spacers -
Holds sheets in place
during blanking process.
3/16” and 5/16” with screws.
Made from Nylon, includes
installation screws.
Used in stripping and
blanking tooling.
Trim Breakers -
Upper & Lower Stripping Pins -
Universal, right or left in a variety of
sizes and styles.
And supporting assemblies including
all brackets, pins and bolts. Available as
an assembly, or by individual parts.
Centerline - Storage Bolts and Nuts (blue,
orange, yellow, black) 43 mm. - 50 mm.,
Unthreaded T-Nut, Black & Red Centerline Pieces.
Easi-Blank System -
Easi-Blank Frame Kit -
Easi-Blank Joggers -
Blanking Easi-Foam -
Assembled frame kit with
joggers.
Designed for Bobst and
Iberica blanker presses.
Designed for universal use.
Ideal for the male blanking
tool, custom water jet cutting
is available.
10
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
E J E C T I O N M AT E R I A L S
Wagner Die Supply offers a wide variety of ejection
materials in both closed and open cell styles, from
the industry’s leading sources.
Wagner offers a family of open cell materials in
strips, blocks and sheets in various thicknesses with
and without PSA. Di-Wave and Di-Point profiles are
also available.
Check our website at:
http://www.wagnerdiesupply.com/ejectionmaterials.html
Wagner Die Supply open cell die ejection materials.
Black 65
Red 70
Red 75
Contact us or visit www.wagnerdiesupply.com for sizes and detailed information!
Monroe Ejection Materials
12000 & 22000
MR 1100
12000 Series of Closed Cell ejection
material is consistent and durable,
22000 is an upgraded version.
Both are available in black, gray,
red, tan, orange and blue.
Monroe’s MR1100 microcell rubber
outperforms conventional open cell
rubber in compression, ejection
speed and durability. Available in
sheets, strips and blocks.
Monroe Profiles
From left to right: Ejecto-Flex, MR Point, MR Wave and Side Wave.
Available in wide range of styles including Green G’rilla, Red Rhino,
MR75 and other Monroe materials.
Green G’rilla™
Red Rhino™
Green G’rilla and Red Rhino shown in “Groovy” slot rubber.
MR75
BK85
MR75 is a microcellular polymer
without the drawbacks of old
standard 75 rubber.
Firm microcell material with a
durometer rating of 83-90 &
40-50.
More Ejection Materials next page!
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
11
E J E C T I O N M AT E R I A L S
Kodiak Ejection Materials
KO-4 KO-10 KO-11
-3
KO
O-19
KO-1 KO2B K
K
-18
KO
O2G
Kodiak Open Cell
KO-30
Available in a wide range of heights, in sheets, strips and
shapes.
Kodiak Profiles
Kodiak Closed Cell & Microcell
From left to right: Blue Frontier, KO-15 (closed cell),
Red Grizz, Green Grizz and KO-20T. Available in
sheets, strips and shapes in a wide variety of heights.
From left to right: Kodiak Trap Cut, Bear
Claw and Side Wave profiles. Profiles
available in open and closed cell styles.
Dura Strip & Vulcan
Sheets -
ReelStrip™ - Vulcan slot
rubber in coils, 1/4”, 5/16” &
3/8” heights, in various
widths and roll lengths.
C-Profile Rubber -
D-Profile Rubber -
60 Durometer, white
non-marking. Other
profiles & materials available.
Helps hold sheets together
in high speed diecutting,
reduces nicks needed in die.
SuperSet - Ideal for nonporous rubber available in 1
lb. and 1 oz. bottles, in low,
medium and high viscosities.
SpeedySet - Economical
Cyanoacrylate adhesive,
available in two viscosities,
in 16 oz. bottles.
SuperSet HV -
tight and strips clean, waterbased, in 1 qt., & 1 gal.
Stripping Foam -
Blue Slot Rubba -
Kushion Crease -
Multi-Cutter -
Gray 6#, White 2#.
Available in several
thicknesses.
For rotary dies, reduces
fractured scores.
Perfect for cutting strips,
includes spare blades.
Premium slot rubber.
Grip N’ Strip - Holds
12
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
High Viscosity gel-form
version of SuperSet, in
tubes and cartridges.
•
C R E A S I N G M AT R I X
Channel® Creasing Matrix Original Metal-base Matrix
Tapered edges for smooth feed. Eliminates jamming, and ensures a uniform and well-defined crease throughout your run.
Marathon™ Matrix VF -
Plastrix™ Matrix -
Vulcanized Fiberboard Matrix.
Marathon Matrix is film based,
so there is no need for creasing
rule height adjustments.
One-piece Plastic Matrix prevents
delaminating or separating.
Ultra-smooth profile eliminates
the need for taping or ramping.
Multi-cutter -
CCM Bench Miter
Press
Dolphin Cutter -
Matrix Miter Plier
Performs easy angle cuts
on matrix or rubber.
Cuts non-metallic matrix,
includes spare blades.
Bobst Metrix -
Bobst Fibrix -
Metal Based Matrix.
and Fibrix Pro Pressboard
Matrix.
Bobst Super Cut -
Bobst Syntrix -
Bobst Corrugate -
Model 3 bench miter press.
All Plastic Matrix.
Specially-designed for
creasing corrugated.
Creasing Matrix
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
13
DIECUTTING & MAKEREADY
Fit Tape -
Shim Tapes -
Profitape® -
.0015 x 5/16” steel shim
tape in 33’ rolls, self-adhesive.
.002 and .005 in 33’ or 100’
rolls, made from stainless
steel, self-adhesive.
Blue: .001”, Red: .002”
and Yellow: .003” in 1/4”
(6mm) width. Dispenser is
also available.
Tympan Paper -Avail-
Makeready Patch-up
Paper - Available in rolls
Double Face Tape -
Cutting Plate Cleaner -
1”, 2”, 6” and 12” Wide
Rolls
Quick, residue-free cleaning.
Chase Plates -
Press Suckers -
Chase plates & Protection
Plates from Bar-Plate for
a variety of Bobst presses.
Available for diecutting and
printing presses of all
makes.
able in sheets or rolls,
used for makeready
sheets.
in a variety of widths and
lengths. Moisture and tear
resistant.
Cutting & Back Up
Plates - 47 - 52 RC Hard-
Cutting Jackets For Miehle, Miller,
Heidelberg and many
other presses .
ened for Bobst, Brausse,
Kluge, Heidelberg, Thompson
and many others.
Makeready Tapes
& Dispenser 1/4” or 1/2” wipe tape in
.0015, .003 or .006
thicknesses.
Thin Plates & Phenolic Material
Counterplate Locating Pins & Pin Spacers
Thin Plates are available in soft, medium
and hard. Excellent for use with routed
Phenolic counters or with matrix to help
reduce makeready time on recurring runs.
Thin Plate technology can be adapted to
suit most autoplaten presses.
14
ONTARIO, CA
•
Phenolic material is available in flexible or
rigid styles, .017 to .049 thick, in 39” x 39”
or 42” x 42” sheets, some sizes available
with P.S.A.
TACOMA, WA
•
DALLAS, TX
Counterplate Locating Rings and
Spacers allow accurate location of the
Phenolic Counter onto the Thin Plate.
Pins available in aluminum & plastic in
white, black or transparent purple.
•
DIECUTTING & MAKEREADY
Steel Stop Pins -
G&R Stop Guides -
Adjusto Guides -
Quoins & Keys -
Precision ground to help
protect steel rule dies from
damage.
For use on clam shell type
presses when cutting
corrugated material.
Available in 2” x 2” or
2” x 1” versions from
Bar-plate.
Quoins are available in
3”, 6”, 9” and 12” lengths.
Torque Key -
Econo Quoin & Key -
Powerlock Quoin -
Air Stripping Hammer
Prevents damage to quoins
from over-tightening.
3” long, features a wedge
locking system.
Compact, great for securing rule sections that are
regularly replaced.
Quickly strips and separates
waste from diecut parts,
accessories also available.
Air Tool Balancer -
Stripping Hammer -
Wagner Grabber -
Stripping Foam -
Supports tools weighing
5 to 20 lbs.
For stripping waste and
trim by hand.
The safe way to remove
scrap and debris from the
stripping end of the press!
2 sizes, 36” and 52” lengths.
Gray 6#, White 2#.
Wagner can supply OEM
parts and supplies for
Bobst autoplaten
presses:
• Thin Plates
• Stripping & Blanking
As well as components
for Martin Rotary presses
like DRO hoops.
Wagner also carries:
• Skiveready knives
• Score cutters
• Sample-making tools
• Counterboard
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
15
DIEROOM EQUIPMENT
Wagner Extractor 2000: The True Blue Original is Still the Best!
For over 20 years, Wagner’s Extractor 2000
has led the way in safe rule pulling.
Extractors pull rule straight up, with up to
600 lbs. of reliable pulling power! Keeps
knuckles safely away from sharp rule edges!
ONLY Wagner Extractor 2000 features:
• Quality USA-Designed & Manufactured
components
• A full set of pins for easy configuration
• A set of Urethane pads for use on
complex die layouts
• A handy caddy that keeps pins and
pads safely stored in-between uses
• Replaceable jaws - in standard and
narrow versions
Narrow
Jaws
Standard
Jaws
Wagner Extractor 2000 - with Pins, Urethane Pads & Caddy.
Helmold Standard
Notcher - Many notch
Helmold E-Z Bendall -
Helmold Cutter -
Helmold Heavy Duty -
Also available in Standard,
Heavy Duty models.
Models are available for
cutting steel rule up to 1-1/2”, 21/8” or 2-7/8” in height.
2 & 4-hole Notchers, also
available in E-Z model, replacement blades available.
Helmold Miter -
Replacement Blades &
Knives - Helmold cutters,
Rotary Miter Knives -
Curver/Flattener Tool -
for 1-1/2” model Helmold
Cutter.
for rotary rule.
Single miter or right and
left hand miter.
notchers & miters. Wagner can
provide sharpening or retipping.
sizes available.
Wagner Knifing
Tables and
Work Benches
are in limited supply,
please contact us
for availability!
16
Helmold Cutawl Saw -
Wagner Knifing Table -
Wagner work bench -
for Flat and Rotary
dieboards. Blades also
available, see page 7.
Feature rugged construction
with a 48” x 48” speciallyground top.
With MDF counters ready
for equipment & peg board
backer for tool organization.
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
HENDERSON STORAGE SYSTEMS
Storage Systems Rotary Die Storage System and Rotary Transfer Cart
For 5/8” and 3/4” dieboards,
stripping and blanking tooling.
Flat Die Transfer Cart
Rotary Die Storage - For DRO
Rotary Die Storage - For EVOL
Rotary Dies.
Rotary Dies.
Flat Die Storage Pins -
Litho Plate Storage -
1/8” pin for 5/8” wood, 3/16” pin for
3/4” wood.
Hooks are also available separately.
Easi-Hanger Blanking System
Hanger Brackets.
Mounted and Unmounted
Printing Plate Storage -
Printing Plate Transfer Cart
Ink Storage Units
Hooks are also available separately.
Custom Storage Systems can also be designed and manufactured upon request.
ONTARIO, CA
•
TACOMA, WA
•
DALLAS, TX
•
17
America’s Die Supply leader.
Celebrating over six decades of service.
WEST COAST
2041 Elm Court, Ontario, CA 91761
Toll-Free (800) 423-4478
(909) 947-3044 • Fax: (909) 923-7809
Toll-Free Fax Ordering: (866) 786-2437
P-U-N-C-H-E-S
Northwest Shipping Point - Tacoma, WA
SOUTHWEST
2532 Converse Street, Dallas, TX 75207
Toll-Free (800) 262-4695
(214) 630-4695 • Fax: (214) 630-5425
MIDWEST
960 Industrial Drive, Unit 8, Elmhurst, IL 60126
Toll-Free (800) 334-7914
(630) 782-6230 • Fax: (630) 782-6220
An E.S.O.P., Employee-owned Company.
For the latest information and updates, visit our website at:
© 2016 - Wagner Die Supply - WDS-C-32016-Rev. 1

steel rule - Wagner Die Supply

Transcription

Similar documents

wrap sunglasses

A golden opportunity to A golden opportunity to

Hypoid Saw

treadmill - TRUE Fitness Equipment

ACANTHUS TOWEL RING | 3430

Huvitz Patternless Edger

Chisels - Irwin Tools

E-Catalog - Advanced Die Supplies