Jalie 2911 Pullover with Hood with Contrast Lining Tutorial By Jerigirl

Jalie 2911 Pullover with Hood with Contrast Lining Tutorial
By Jerigirl
1. Gather your lining fabric and outer fabric for the hood. In this
example the blue velour is the outer fabric and the camo print is the
lining fabric. From pattern piece E, you will cut 2 pieces from the outer
fabric and 2 pieces from the lining fabric. In this case you will NOT be
cutting on the fold as the pattern directs. Instead add a ¼ inch seam
allowance to the foldline edge of the pattern piece. (I will call this the
long edge.)
Outer Fabric
Lining Fabric
2. Sew one piece of outer fabric to one piece of lining fabric right sides
together (RST) along the long edge. Open and press the seam to one
side. Repeat with the second outer and lining pieces.
3. Now you essentially have the hood pieces described in the pattern
instructions. Take the two hood pieces and sew them RST along the
curved edge.
4. Fold the hood piece in half and sew along the curved edge.
5. Turn hood right side out. It will be connected at the center seam.
6. Now you are ready to continue with the pattern instructions as
directed.
Copyright © 2011 by Sewing Mamas LLC, sewingmamas.com. All rights reserved. This sew
along is complimentary, and may be printed and shared freely as long as this copyright
statement stays intact. No part of this e-booklet may be resold or redistributed by sites
other than http://www.sewingmamas.com without permission from the author.