For some of the best Stepvan Creations check out our

Transcription

REPLACEMENT
800-888-5072 • MillSupply.com
WINDSHIELD GLASS
93
WINDSHIELD SIDE GLASS AND GASKET that fit
fits GRUMMAN/MORGAN OLSON BODY
WINDSHIELD GASKET & TOOLS
37-473 - 25 ft
of Glass to glass
gasket with filler
bead
37-474 - 12.5 ft
of Glass to glass
gasket with filler
bead
R-1025 - Windshield
Gasket in 50 ft rolls.
Requires filler bead
Number R-1029
R-1025-P Windshield
gasket per foot
R-1029 -Filler Bead
for R-1025 in 50 ft
rolls.
R-1029-P - Filler
bead sold per foot
16-320 - Windshield
Locking Strip Tool.
201-1640 - “E”
Handle insert
tool w/ 7/16” eye
201-1641 7/16” eye only
37-333 - One piece
self-locking windshield
weatherstrip, 50 ft. roll
WINDSHIELD SIDE GLASS & WEATHERSTRIP - LEFT or RIGHT SIDE
Make
Model
Year
Side Glass
Part No.
Glass Dim: H x W
*Truck
Height
Weatherstrip
Part No Weatherstrip
Length
All
Route Mate 1989-current
35-357................. 28" x 13.19"................72"....................35-405............. 73.62"
Chevrolet Kurbmaster
1970-1997
35-357................. 28" x 13.19"................72"....................35-405............. 73.62"
& Route Star
35-355.................28" x 13.41"................80"....................35-401..............74.75"
35-370.................28" x 13.59"................84"....................35-408............. 75.75"
Chevrolet Route Star
1998-current
35-377.............. 32.44" x 13.77".............72"....................35-457................82"
35-376.............. 32.44" x 13.91".............80"....................35-455............. 83.40"
35-375.............. 32.44" x 13.97".............84"....................35-456............. 83.94"
Ford
Kurbmaster
1970-1997
35-362.................28" x 15.25"................72"....................35-412............. 76.59"
& Route Star
35-363.................28" x 15.56"................80"....................35-413............. 78.06"
Ford
Route Star
1998-current
35-372.............. 32.44" x 16.02".............72"....................35-464............. 83.44"
35-374............... 32.44" x 16.21".............84"....................35-468............. 85.61"
Freightliner Route Star
1998-current
35-367.............. 32.44" x 18.09".............80"....................35-447............. 90.06"
35-368.............. 32.44" x 18.07".............84"....................35-448............. 90.57"
Filler Bead for all Weatherstip
(fil er bead is not included with weatherstip and must be ordered separately).R-1029/50ft R-1029-P/ft
DOORLESS WINDSHIELD SIDE GLASS & WEATHERSTRIP - LEFT SIDE ONLY
Chevrolet Kurbmaster
1979-1997
NLA................... 28" x 17.31"................ 72.....................35-410..............81.87"
& Route Star
NLA................... 28" x 17.33"................ 80.....................35-411................83"
35-392................. 28" x 17.72"................ 84.....................35-415................84"
Ford
Kurbmaster
1979-1997
NLA...................28" x 19.43"................ 72.....................35-420............. 86.50"
NLA...................28" x 19.62"................ 80.....................35-419............. 86.31"
Filler Bead for all Weatherstip
(fil er bead is not included with weatherstip and must be ordered separately).R-1029/50ft R-1029-P/ft
*Truck Height is measured by the interior height of the truck - determined by the distance from floor to ceiling.
NLA - No Longer Available
SLIDING WINDOW INSTALLATION HARDWARE
UNIVERSAL SLIDING
WINDOW LATCH
4"
M-39000
Hand Riveter
2774-0613
Monobolt Window Mounting Sets up to 3/16" Rivets
Rivet 3/16" dia, 5/16" grip
range, 100 pcs. per package
35-215
Window Channel Felt
7/8" wide (sold per foot)
(minimum 25 foot)
35-212
Sealant tape for
weatherproofin
1/4" x 1/2" x 40'
38-281 - Latch Only, 3"
C to C mount holes. Includes
glass mounting hardware
38-282 - Keeper Only
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 93
7/21/2016 2:36:18 PM
94
REPLACEMENT
SLIDING WINDOWS
SLIDING WINDOWS
WINDOWS that fi
fit GRUMMAN/MORGAN OLSON
1 - Fits Opening 30"H x 35"W
Replace
your
Existing
Sliding
Window
5 - Fits Opening 27-3/8"H x 29-1/4"W
CHECK THE WINDOW OPENING
SIZE BEFORE YOU ORDER
BLACK
FRAME
Replace
your
Existing
Sliding
Window
5A
1
1A
5G
Overall frame size: 31-1/4"H x 36-1/4"W
1...... 37-345.............. LH Sliding side window
1B
1...... 37-346.............. RH Sliding side window
1A.... 38-290............. Factory Latch, Mounting Holes: 2-1/2" C-C
1B......2774-0613P....... 3/16" Monobolt Rivet to mount window, each
35-212
1/4"x1/2"x40'
Weatherproof
Sealant Tape
2 - Fits Window Opening 24-1/4"H x 26-1/4"W
Replace your
Existing
Sliding
Window
2A
5B
1980 TO
PRESENT
Fits on Drivers
or Passenger
Side
5
5C
5......37-176............... LH or RH sliding window for UCBC 1980 - present.
Replaces OEM# 27329376 and 27329377
5A....38-287.............. Window latch & keeper assy, 37-285 & 37-286
5B....38-286.............. Window latch keeper only, 3"L
5H
5C....38-285.............. Window Latch only. Hole Dim: 2.5" center to center
5G....35-135.............. Weatherstrip for sliding window. Continuous loop, holds
window in frame. Fits cutout with 1/8" or less material thickness around window
5H....37-597.............. 25' Gasket with filler bead to fit a win w opening cutout with ..................................... 1/2" material thickness.
5H....37-598.............. 12.5' Gasket with filler bead, same as 37-597 ut only 12.5 foot.
WINDOWS that fifit UNION CITY BODY CLASSIC
2
2B
Overall slze: 25-5/8"H X 27-3/4"W
2......37-320.............. LH Sliding side window
2......37-323.............. RH Sliding side window
2A....38-288.............. Window latch, Hole Dim: 3" center to center
2B......2774-0613P....... 3/16" Monobolt Rivet to mount window, each
3 - Fits Opening 19-3/4"H x 26-7/8"W
4 - Fits Opening 20-5/8"H x 26-7/8"W
Replace
your
Existing
Roll-up
Window
WINDOWS that fifit UNION CITY BODY
Predrilled,
installs
quickly
with rivets
35-212
1/4"x1/2"x40'
Weatherproof
Sealant Tape
Stationary
Glass
Sliding
Glass
5 - Fits Opening
27-3/8"H x 29-1/4"W
Passenger Side
3R
4R
3L
4L
6 - Fits Opening
26-1/4"H x 26-5/8"W
5
Driver's Side
5A
3, 4
3A
3......WK-19.............. LH & RH Window kit w/ installation hdw,
sealant tape, and mounting rivets
3......WN-1925......... LH Sliding window, no installation hdw
3......WN-1926......... RH Sliding window, no installation hdw
3L....37-113............... Replacement sliding glass
3R....37-112............... Replacement stationary glass
4......WK-20.............. LH & RH Window kit w/ installation hdw,
sealant tape, and mounting rivet
4......WN-2027......... LH Sliding window, no installation hdw
4......WN-2028......... RH Sliding window, no installation hdw
4L....37-115............... Replacement sliding glass
4R....37-114............... Replacement stationary glass
Window Latches fit All Windows
3A....38-286.............. Window Latch Keeper, 3"L
3B....37-101............... Window latch, Hole Dim: 1-7/8" center to center
3C......2774-0613P....... 3/16" Monobolt Rivet to mount window, each
6
3B
5G
3C
35-212
1/4"x1/2"x40'
Weatherproof
Sealant Tape
5B
5C
5......37-176............... RH sliding window for UCBC 1980 - present.
Replaces OEM# 27329376 and 27329377
5G....35-135.............. Weatherstrip for sliding window. Continuous loop,
holds window in frame for 37-176 window only
6......37-140............... LH Sliding window for UCBC Classic. Replaces
crank down style window. Mounted w/ a flange
rivets. Popular on Frito Lay & Aramark stepvans
Window Latches fit Both Windows
5A....38-287.............. Window latch & keeper assy, 37-285 & 37-286
5B....38-286.............. Window latch keeper only, 3"L
5C....38-285.............. Window Latch only. Hole Dim: 2.5" center to center
7/21/2016 2:36:35 PM
REPLACEMENT
SLIDING WINDOWS & HARDWARE
WINDOWS that fifit UTILIMASTER
REGULATOR ACCESSORIES
WINDOW CRANK HANDLES
7 - Fits Window Opening 29-1/4"H x 32"W
Replace
your
Existing
Sliding
Window
35-212
1/4"x1/2"x40'
Weatherproof
Sealant Tape
7A
7B
38-108 - Splined Window
Crank Handle with short shaft
(screw included)
BLACK
FRAME
7
Overall Frame Size: 30-1/2" x 33-1/2"
7......37-275.............. LH Sliding side window
7......37-276............... RH Sliding side window
7A....38-294.............. Window Latch, 4" tall, Mounting Holes: 2-7/8"
7B.....2774-0613P....... 3/16" Monobolt Rivet to mount window, each
Black handle & knob
Predrilled,
installs
quickly
with rivets
8
8A
8B
35-212
1/4"x1/2"x40' Weatherproof
Sealant Tape
8C
38-107 - High Profile Crank
Handle Reduces possibility
of door not latching in open
position. Eliminates window
regulator shaft bending when
handle hits "B" Post. Used
with 87 series regulators.
38-175 - Window Crank
Handle Includes screw,
3/8" square shaft
Length: 4-1/8"
8 - Fits Window Opening 24-3/4"H x 26-5/8"W
Replace
your
Existing
Roll-up
Window
95
8......37-251.............. LH Sliding window, replaces roll up window
8......37-250.............. RH Sliding window, replaces roll up window
8A....38-286.............. Window latch keeper only, 3"L
8C.....2774-0613P....... 3/16" Monobolt Rivet to mount window, each
38-184 - Window
Crank Handle
Screw not included,
3/8" square shaft,
Length: 4-7/8"
38-270 - Single sided
window channel.
Pile lined, rubber
covered, stainless
steel bead. 96” long
Chrome with black knob
38-280
Unbeaded
Black Window
Channel, Steel
reinforced, 96”L
1/2"
5/8"
9 - Fits Window Opening 30"H x 31-7/8"W
BEFORE
Replace
your LH
Existing
Roll-up
Window
AFTER
38-105 - Window Channel for use with chain regulators
or use separately to make a solid window. Install on glass
and bolt through square hole to door.
9
9A
9B
9C
Tape for Glass in Lower Channel
101-0263-P......3/64" x 1-1/2" x 2'
101-0263..........3/64" x 1-1/2" x 100'
101-0264..........5/64" x 1-1/2" x 100'
35-212
1/4"x1/2"x40'
Weatherproof
Sealant Tape
9......37-295.............. LH Sliding window. Replaces Utilimaster roll up
window with regulator
9A....38-286.............. Window latch keeper only, 3"L
9C.....2774-0613P....... 3/16" Monobolt Rivet to mount window, each
Window Regulators
7/21/2016 2:36:47 PM
REPLACEMENT
96
WINDOW REGULATORS
WINDOW REGULATORS
that fi
fit GRUMMAN/MORGAN OLSON
23-7/8"
(mount hole to mount hole)
Crank type regulator with endless galvanized chain
The regulator that is used on Utilimaster with
27-3/4" dimension is no longer available.
8922 can be used if you redrill bottom
mount holes but the window will not
roll down all the way. You can also
purchase M1612, drill out the
spot welds and use the parts to
repair your old regulator.
Regulator with
Channel & Handle
8922-CL
8922-CR
Regulator Only
8922-CSL Drivers Side
8922-CSR Pass Side
24" Lift — 29-1/4" Overall Length
87-24L......Crank Type Regulator
with Channel (38-105) and Handle (38-107)
87-24SL....Regulator Only
Universal LH or RH
Popular on Route Star
Part No.
Description
Year
37-122.....Roll-Up window glass, side door................. '70-'93
23" x 28-3/16", (All Vans)
37-123.....Roll-Up window glass.................................. '93-'97
23" x 28-1/16", (All Vans)
37-124.....Roll-Up window glass, side door, tinted....... '90-Current
23" x 28-1/16", (All Vans Except Kurbmaster)
37-126.....Roll-Up window glass, side door................. '99-Current
28-7/16" x 32-19/32", (fits Route Star)
37-127.....Roll-Up window glass, side door................. '99-Current
23-15/16" x 32-19/32", (fits Route Star)
38-100 - Window Regulator RH
38-101 - Window Regulator LH
38-302 - Channel Only
38-175 - Handle and Screw
REGULATORS that fifit UTILIMASTER
38-645 LH Regulator
with square shaft
(Use Crank handle 38-175)
38-300 - Regulator Only
Fits LH or RH Side
38-302 - Channel Only
38-304 - Mounting Screw
38-306 - Window Guide
38-175 - Handle & Screw
101-0263-P - Channel Tape
2' x 1-1/2"
Description
Made of 1/4" tempered glass.
Tempered glass is several
times stronger than regular
glass; when broke it shatters
into small pieces to reduce
hazard.
See our Sliding
Windows on
pages 94-95
REGULATORS that fifit UNION CITY BODY
M-1612 - Left Hand
Window Regulator that
fits 1988 and newer
Grumman Olson.
Does not include crank
handle and channel.
Part No.
ROLL-UP DOOR GLASS
that fit
fits GRUMMAN/MORGAN OLSON
10"
28-1/4"
38-645
Right Side
Showing
Year
38-675.....Window regulator, LH............. '99 - Current
38-677.....Window regulator, RH............. '99 - Current
38-110......Glass channel for 31" door..... '99 - Current
25" length
38-111......Glass channel for 35" door..... '99 - Current
17-11/16" length
M-2565
10-32 Screw for Inner Door Panel On
Grumman Sliding Doors (sold each)
20"
38-634
25-1/2"
38-633 LH Regulator
with square shaft
38-634 RH Regulator
with square shaft
(Use Crank handle 38-175)
The triangular crank type regulator is no longer
available. See top left for alternatives.
7/21/2016 2:36:50 PM
REPLACEMENT
SIDE & REAR DOOR WEATHERSTRIP
that fit
fits UTILIMASTER
WINDOW WEATHERSTRIP
97
that fit
fits GRUMMAN/MORGAN OLSON
35-101
Side door forward weatherstrip,
enough for one door, 95" length
35-111
Side door forward weatherstrip.
Order in 8 foot increments only.
Priced per foot
35-112
Side door forward
weatherstrip
Order in 7 foot increments
only. Priced per foot
35-102
Side door forward weatherstrip,
enough for one door,
1/2"W x 11/16"H with ridges on top.
35-103
Side door forward weatherstrip, enough
for one door, 1/2"W x 11/16"H. Smooth
on top
11/16"
35-105
Side door rear deflector rubber
enough for one door.
3/4" base with 1-3/8" seal
34-150
Rear Gasket, 3/8" H x 5/8" W. Fits
double & quad rear swing-out
doors. 50 foot length.
35-116
Front "A" Post
Weatherstrip, 10 ft.
Enough for one door
that fit
fits UNION CITY BODY
1/2
"
35-106 - Rear Door
Weatherstrip for hinged
doors. Sold in 10 ft
sections only.
M-1417 Metal
edge guard,
50' roll
35-104
Side door
forward
weatherstrip,
enough for
one door
35-133
Side door weatherstrip
8' L x 3/4" H x 1" W.
1-3/8"
35-107
Side door rear deflector rubber,
enough for one door.
11/16" base with 1/2" seal
35-109
Side door forward
weatherstrip. Order in
7 foot increments only.
Priced per foot
AV-4675 - 50ft
AV-16390 - 15ft
Side or Rear door flange
weatherstrip
11/16"
35-210
Retainer for
Forward weatherstrip
(Angled on bottom for
door)
M-40222P
Aluminum
Rivet for
mounting
weatherstrip
(50 pcs.)
35-211
Retainer for
Forward
weatherstrip
(Straight)
3M-8001
Yellow Weatherstrip adhesive.
High strength adhesive. Bonds
rubber and vinyl weatherstrip.
7/21/2016 2:37:28 PM
98
REPLACEMENT
SIDE DOOR HANDLES
SIDE DOOR HANDLES
Mounting holes measure 4-15/16" C to C top to bottom and 1-15/16" C to C side to side.
Rect.
Tongue
Handles
1 thru 4 use
this cylinder
21
22
1
5/16"
SQUARE
2
3
3/8"
SQUARE
Shaft Size
5/16" x 3/8" x 3/8" x 3/8" x
Loc
1
1
1
1
1
1
2
2
2
3
3
4
4
Part No.
23
4
Locking 20
Finish
Key Required Non
*NOto Key
3-3/4" 1-15/16" 2-3/4" 3-3/4" Req.
Lock * to Lock
Locking Chrome Black
K-4001
4
4 4
K-4001-X
4 4 4
K-4001-XX
4 4
4
K-4001-S
4
4 4
K-4001-XS 4
4 4
K-4001-XXS 4
4
4
K-4003
4
4 4
K-4003-X
4
4 4
K-4003-XX
4
4 4
K-4001-B
4
4 4
25-150
4
4 4
K-4022-XX
4 4
4 K-4223-XX 4 4 4 NO Key Required - Push button in without key to lock
*Locking
Locking Key Required - Push button in and turn key to lock
*
OE on Grumman Morgan Olson Only
Round
Tongue
24
24A
20
Comments
OE on Grumman
You can cut
the shaft to a
desired length
if too long.
3/8" Square
shaft handles
will fit inside
latch K4000
or K4002.
See page
100.
OE on Utilimaster
Web Style Handle
Web Style Handle
Cylinders, Keys & Accessories
20...26-170............... Rubber Boot
21...MC-50+Key#... Cylinder & 2 Keys. Key No. Avail. 2,4,5,7,10,13,15,20,24,25,41,50
22...M-1404+Key#.Cut Key Only. Single Cut, Key numbers available 1-50
23...M-1403.............. Uncut Key Blanks, Single Cut
24...MC-51................ 1 Push Cylinder w/2 Key, Double cut key, Round Tongue Type
24...29-502............... 2 Push Cylinders w/4 keys, keyed alike (Same as MC51)
24A.29-512............... 1 Push Cylinders w/2 keys, Single cut key, Round Tongue Type,
Key No's Avail: 5,10,15,25,41
25...29-500.............Uncut Key Only, Double cut (5A Code)
25...KG-3.................. Uncut Key Only - Double Cut .(For "G" Code Grumman Cylinders
(three cutouts on center bar)
26...M-1408.............. Uncut Key Only - Double Cut ("H" Code Cylinders)
25
5
6
26
Handles with Round Tongue Cylinders
5.....MH-44................ Locking Chrome Grip Style Handle. 3/8" x 1-15/16" shaft
(less cylinder)
6.....25-140............... Locking Black Web Style Handle 3/8" x 1-15/16" shaft
(less cylinder)
Call us if your key codes do not match the ones shown for this
round tongue cylinder. Other keys with lower numbers are now
available special order.
SIDE DOOR HANDLE MOUNTING HARDWARE
M-1606 - 1/4"
Nylon Lock Nut
(100 pcs)
M-1606-P - 1/4"
Nylon Lock Nut
(one piece)
Stainless Steel
Phillips Oval Head Screws
M-1556 - 2-1/2" x 1/4"-20 (100 pcs)
M-1556-P - 2-1/2" x 1/4"-20 (one piece)
98-010 - 3" x 1/4"-20 (100 pcs)
98-011 - 3" x 1/4"-20 (one piece)
7/21/2016 2:37:49 PM
REPLACEMENT
SIDE DOOR HANDLES
99
SIDE DOOR HANDLES
12
10
8
13
11
9
28
Side Door Handles
8.....25-960............... Locking Side Door Handle. Use w/ LH and RH inside door
latches shown on page 100
9.....M-1414.............. Outside Paddle Handle Assembly w/ cylinder hole. Order C-320
cylinder separately. For inside latches see page 100
10....25-125............... Locking "L" Handle, 5/16" x 3" shaft. Mount Holes: 1-1/2" C to C
Uses #10 mount screw, see page 105
11....25-126............... Non-Locking "L" Handle, 5/16" x 3" shaft. Mount Holes: 1-1/2"
12....25-116................ Locking "L" Handle, 5/16" x 4" shaft. Mount Holes: 1-1/2" C to C
13....25-117................ Non-Locking "L" Handle, 5/16" x 4" shaft. Mount Holes: 1-1/2"
28...C-320................. Cylinder only, for M-1414 handle
1-3/8" Dia.
Brass Tag,
19 gauge,
easy to stamp
1-1/4" Dia.
29-295 - 1-3/8" Brass Key Tag, 100 pcs
29-296 - 1-3/8" Brass Key Tag, sold each
29-299 - 1-1/4” Key Ring, sold each
RETROFIT DOOR HANDLE AND LATCH HARDWARE KIT that fit
fits ROUTE STAR
Kit includes all screws, nuts and other misc.
mounting hardware
Old Style
New Style
Mill Supply’s replacement hardware kit will replace your entire original handle and latching mechanism. The
original latching hardware is obsolete. Our complete kit includes: an exterior Kason handle and interior latch,
reinforcement plate, striker, spacers, bolts and instructions. Installation time is approx. 1-1/2 hours per door.
26-037 - LH Retrofit Door Handle & Latch Kit (less MC51 lock cylinder)
26-039 - RH Retrofit Door Handle & Latch Kit (less MC51 lock cylinder)
MC-51- Cylinder & Key
(one set)
29-502 - Cylinder & Keys
(set of 2, keyed alike) MC-51
New Style
Locking Door
Handle with
plate.
—
Eliminates
the need for a
separate door
cylinder. Plug
included
New inside
latch and
strike
replaces
your worn
rotary type
latch.
Rotary type
latch and
interior
handle
shown
damaged
and worn.
Original exterior handle, interior latch & strike are no longer available
7/21/2016 2:38:11 PM
REPLACEMENT
100 SIDE
DOOR HARDWARE
INSIDE SIDE DOOR LATCHES & STRIKES
All new latches use a 3/8" square
shaft. If your original inside latch
used a 5/16" square shaft, you
will have to convert the inside latch
and the exterior handle to 3/8".
Exterior side door handles are
shown on page 98.
1
3
2
Latches & Accessories
1.....K-4002.............. Web Style Interior Latch, accepts 3/8" square shaft.
Mount Holes: 4-15/16" C-C top to bottom. 1-15/16" C-C side to side
2.....K-4000.............. Standard Grab Handle Interior Latch accepts 3/8" square shaft
Mount Holes: 4-15/16" C-C top to bottom. 1-15/16" C-C side to side
3.....25-971............... LH Latch (use with 25-960 previous page)
4.....25-973............... RH Latch (use with 25-960 previous page)
5.....25-130............... Non Locking chrome plated inside door handle. Fits all 5/16"
square shanks.
6.....25-120............... Non Locking 5/16" x 4" shaft w/ 1-1/2" mounting centers. Flush
mount doesn't require extra drilling at shaft to mount. Uses #10 screw.
7.....5696.5............... Universal Sliding Door Latch with 5/16" square shaft hole for
handle shank. Body Dim: 4-1/8" x 2" with overall width of 3-3/4". Has equal length latching arms.
Mounting holes: 1-3/8" C-C wide x 3-5/8" C-C top to bottom.
10....206U-L.............. LH latch. Dim: 4-3/8" L x 5" W x 3/4" D (shown)
10....206U-R.............. RH latch. Dim: 4-3/8" L x 5" W x 3/4" D
11....B-2395AA........ Door Check
12....8015-545........... Pillar cylinder and key for 206U latches. Cut shaft to length
13....M-1415.............. RH inside latch, used with handle M1414, see previous page
14....M-1416.............. LH inside latch, used with handle M1414, see previous page
4
20
22
21
23
24
2-3/4"
5
4"
5-1/2"
6
25
7
2"
27
26
28
12
29
6-1/2"
10
(LH shown)
11
6
13
14
SIDE DOOR HANDLE MOUNTING HARDWARE
M-1606 - 1/4"
Nylon Lock Nut
(100 pcs)
M-1606-P - 1/4"
Nylon Lock Nut
(one piece)
30
Stainless Steel
Phillips Oval Head Screws
M-1556 - 2-1/2" x 1/4"-20 (100 pcs)
M-1556-P - 2-1/2" x 1/4"-20 (one piece)
98-010 - 3" x 1/4"-20 (100 pcs)
98-011 - 3" x 1/4"-20 (one piece)
31
32
33
34
Strikes & Accessories
20...29-607............... LH Bracket Assembly for front strike, UCBC
20...29-608............... RH Bracket Assembly for front strike, UCBC
21...29-609............... Front strike plate, UCBC
22...29-610............... Spacer for front strike, UCBC
23...29-616............... Rear Strike, UCBC
24...29-625............... Brass “A” Post Front Strike. Fits LH or RH, Grumman Olson
25...29-630............... Brass “A” Post Front Strike. Fits LH or RH, Grumman Olson
26...29-632............... Side door front strike, Utilimaster
27...29-634............... Side door front strike, Utilimaster
28...29-633............... Side door rear strike, Utilimaster
29...29-620............... Side Door Adjustable Strike, Forward and Rear. Fits on RouteStar
and Routemate Grumman/Morgan Olson
30...31-104................ Door stop bumper to mount on strike, Grumman/Morgan Olson
31...29-612............... RH “B” Post Rear Strike, Grumman Olson
32...29-613............... LH “B” Post Rear Strike, Grumman Olson
33...29-622............... "B" Post Rear Strike. Tall design keeps window regulator handle
from hitting "B" Post. Fits LH or RH, Grumman Olson
34...29-629............... Rear Strike, UCBC
7/21/2016 2:38:48 PM
REPLACEMENT
SIDE DOOR HARDWARE 101
LOWER WEAR STRIPS & GUIDE CASTINGS
SLIDING SIDE DOOR HARDWARE
UPPER TRACKS
29-101 - Wear strip,
40" L, rivets to bottom edge of
aluminum door
29-102 - Wear strip 24-1/2"L, rivets to
bottom edge of aluminum door
Popular on Grumman/Morgan Olson
29-810
LH Upper door track
29-811
RH Upper door track
Tracks used on pre1980 vehicles
SK-6023-RA
2" Diameter Roller,
bolt, nut, washer and
bushing assembled
123694-1
2" Diameter
Roller, bolt,
nut & washer,
assembled.
ST-34
1/4" Stud for
upper door
track
29-800 - Upper Track 84"
long (must be cut to length)
M-40220-P
Aluminum pop rivet
for wearstrips
(50 pcs). Used with
29-101 and 29-102
29-105
Lower Wearstrip,
2" white nylon,
2" x 1/4" x 36" L
(Fits Utilimaster)
Cross Section
29-107
Lower Wearstrip,
white nylon,
1-3/32" x 1/4" x 37" L
(Fits UCBC 1992-2006)
Cross Section
HANGER ASSEMBLIES
See page 110-111 for
bulk head door hardware.
Utilimaster
Supreme Body
1/4” wide
X X
1/2" wide
X X
3/4” wide
X X
1-1/4" wide X
X
Vehicle Application Chart
Part No.
Length
29-3614 29-3612
29-3634 29-40114 36"
36"
36"
40"
Union City Body
1" Diameter Rollers
Grumman Olson
Cross Section
Width
29-126 - Lower door guide
aluminum extrusion. 41-1/2"
length. Fits Utilimaster
Shown Assembled
29-128 - 60" Aluminum
Retainer for 29-127 Door
Guide (Fits Utilimaster)
29-127 - Poly
door guide for
29-128, 60" length.
End View
29-4904 - Door Hanger, single sided
for aluminum doors. 36-1/2" length
35-3/4" L x 1-3/4" W x 11/16" H.
29-121 - LH Cast Aluminum Lower Door Guide
29-122 - RH Cast Aluminum Lower Door Guide
29-4936 - LH or RH Side door hanger
that fits '98-current Route Star, 36-1/2"
length. Includes brush seal.
29-41175 - LH or RH Side door hanger
that fits 'UCBC. 37-1/2"L x 1-3/4".
Fits Grumman/Morgan
Olson and Supreme Body
51-1/2" L x 2" W x 11/16".
29-125 - Polypropylene Lower Door
Guide. Must be cut to length. Can be
used to replace 29-121 or 29-122.
7/21/2016 2:39:22 PM
REPLACEMENT
102 REAR
DOOR HANDLES
REAR DOOR HANDLES
Hole spacing: 2-3/8” C to C
Hole spacing: 5-7/16” top to bottom, 2-1/8” side to side
Handles 1-3 fits these
Center Mechanisms
Rect.
Tongue
20
Handles
1,2 & 4 use
this cylinder
11
10
2
1
3
Hole spacing: 5-3/8” top to bottom
1-1/4” side to side.
Fits
Morgan
Olson
only
Loc
1
1
2
3
4
4
4
4
5
5
6
7
Hole spacing:
2-3/8” C to C
25
26
Shaft Size
Part No.
5/16" x 5/16" x
1-15/16” 3-3/4"
7
K-168-H
K-168-S
K-168-B
K-168-NLH
K-4168
4
K-4168-X
K-4168-S
4
K-4168-XS
K-4169
4
K-4169-X
25-139
MH-47
*
Locking NO Key
Req. to Lock
*
27
19
19
Finish
Key Required Non
to Lock
Locking Chrome Black
4 4 4
4
4
4
4
4
4
4
4 4
4
4
4 4
4
4
4
4
4
4
4 4
4
4 4
4
4
4
4 4
4
NO Key Required - Push button in without key to lock
*Locking
Locking Key Required - Push button in and turn key to lock
*
15
You can
cut the
shaft
to a
desired
length
if too
long.
16
17
Bolts & Nuts
18
1/4”-20 are used for 4 hole mount plates
15.... 97-443-P...........1/4”-20 x 1”L oval head screw
16.... M-1606-P.........1/4”-20 nylon lock nut
10-24 are used for 2 hole mount plates
17.... AV-13480-P.....10-24 Aluminum nutsert
18.... 97-431-P...........10-24 x 1/2” oval SS screw
Rubber Boot
Fits all Handles on this page
19.... 26-170............... Rubber Protection Boot
Cylinders and Keys
Many key numbers are discontinued, call us for the
latest list of keys & cylinders available.
Is Your Existing 2 Bolt Rear Door Handle(K-4168) Loose and
Ready To Fall Off? The reason is loose nutserts that hold the
screws in place. We have the
SOLUTION!
Replace your existing rear door handle
with a retrofit handle that uses 4
mounting screws and 4 nuts that bolt
the outer handle directly through to
the center mechanism. This new set up
allows the handle to be securely bolted
into place.
5
(see complete assembly page 105)
10......K-160-C....... Center mechanism. Dead bolt style,
6" x 2-1/2". Used with rods & requires handle to be turned to close latch.
11......K-167-C........ Center mechanism. Slam latch style,
6" x 2-1/2". Used with rods with spring loaded latches.
12......K-168-C....... Center mechanism with override,
6-3/16"" x 2-15/16". Used with cables.
12A...K-168-3........ Inside release handle for K-168-C
13......110-C............ Center mechanism w/o spring return,
6-1/4" x 2-1/2". Used with rods.
14......114-COR...... Center mechanism with override.
Used with cables
Handles
6&7
use this
cylinder
24
24A
14
22
Center Mechanisms
Round
Tongue
13
6
4
12
12A
Handle 6
fits these
Center
Mechanisms
Black
Grain
Texture
21
Existing
K4168 with
2 mounting
screws
20...MC-50+key #.. Cyl & Key. No's. Avail. 2,4,5,7,10,13,15,20,24,25,41,50
21...M-1404+key #.Cut key only, Single Cut, Key number available 1-50
22...M-1403.............. Uncut key, Single Cut
24...MC-51................ 1 Push cyl. w/keys, Double cut key, round tongue type
24...29-502............... 2 Push cylinders w/ keys, keyed alike (same as MC-51)
24A..29-512+key#... 1 Push Cylinders w/2 keys, Single cut key, Round
Tongue Type, Key No's Avail: 5,10,15,25,41
25...29-500............... Uncut key only, Double cut (For 5A code keys)
26...KG-3.................. Uncut key only - Double cut (For "G" code Grumman
cylinders). Three cutouts on center bar.
27...M-1408.............. Uncut key only. Double sided ("H" code cylinders)
7/21/2016 2:39:58 PM
REPLACEMENT
REAR DOOR HANDLES 103
REAR DOOR HANDLES
Not Flush
Mount
Flush
Mount
Handles
1.....25-118................ Locking handle, 5/16" x 4" shaft. 1-3/4" mounting centers
o
Rotation: 90 clockwise, not flush moun
2.....25-119................ Non-locking handle, 5/16" x 4" shaft. 1-3/4" mounting centers
o
Rotation: 90 clockwise, not flush moun
3.....25-125............... Locking handle, 5/16" x 3" shaft. 1-1/2" mtg. centers, not flus
4.....25-126............... Non-locking handle, 5/16" x 3" shaft. 1-1/2" mtg, centers, not flus
5.....25-116................ Locking handle, 5/16" x 4" shaft. 1-1/2" mtg. centers, not flus
6.....25-117................ Non-locking handle, 5/16" x 4" shaft. 1-1/2" mtg, centers, not flus
7.....25-120............... Non-locking handle, 5/16" x 4" shaft. 1-1/2" mounting. centers,
Flush mount design doesn't require drilling at shaft to mount.
8.....25-121............... Locking T handle, 5/16" x 4" shaft. 1-1/2" mtg, centers, not flus
9.....25-122............... Non-locking T handle, 5/16" x 4" shaft. 1-1/2" mtg, centers, flus
10....25-962............... Locking handle, 5/16" x 3" shaft. 1-1/2" mounting centers. Fits
on rear doors of Utilimaster and Union City Body stepvans. Used with side door handle 25-960, page 99. Not flush moun
Blind Mount Handles
11....25-164............... Locking handle, 5/16" x 4" shaft. 1-1/2" mtg. centers, not flush
11....25-113................ Non-locking handle, 5/16" x 4" shaft. 1-1/2" mtg. centers, not flush
12....25-073............... Locking handle, zinc die cast, black textured finish, not flu
Overall Dim: 7.45" L x 1.8" W x 1.9" H
Mount Plate Dim: 3" x 1.8"
Mounting Centers: 2.25"
Shaft Length: 3"
13....25-077............... Locking handle, zinc die cast, black textured finish, flush mou
Overall Dim: 8" L x 1.8" W x 2.6" H
Mount Plate Dim: 5.9" x 1.8"
Mount holes: 5-3/8" C-C top to bottom;1-1/4" C-C side to side
Shaft Length: 1-1/2"
14....114COR............ Center mechanism with override. Used with cables
Popular on Grumman/Morgan Olson
5
1
2
6
3
4
Flush
Mount
7
8
Flush
Mount
9
1-3/8" Dia.
10
11
Brass Tag,
19 gauge,
easy to stamp
12
13
Used
with 14
INSIDE REAR DOOR HANDLES
INSIDE RELEASE HANDLE
14
1-1/4" Dia.
29-295 - 1-3/8" Brass Key Tag, 100 pcs
29-296 - 1-3/8" Brass Key Tag, sold each
29-299 - 1-1/4” Key Ring, sold each
SECURITY LOCK & HASP
Keeps swing doors secure!
25-115 - Accepts a 5/16" shaft
Iron handle with Kasonized finish
INSIDE RELEASE HANDLE
25-130 - Accepts a 5/16" shaft
Heavy duty chrome plated.
25-175 - Latch Cam with set
screw. Fits 5/16" square shaft.
Overall length: 2-3/4".
SL-100 - Zinc plated
security lock, shielded
•
•
•
•
•
SLH-100 - Zinc plated hasp
for security lock
Cylindrical lock provides maximum protection.
Hasp shields the cylinder, providing extra security
Heavy-duty zinc-plated steel lock. Zinc-plated &
black powder coated hasp.
Includes all mounting fasteners.
Lock & hasp sold separately.
7/21/2016 2:40:39 PM
REPLACEMENT
104 REAR
DOOR LATCHES
REAR DOOR LATCHES - EXTERIOR HANDLE SPRINGS BACK WHEN RELEASED
SPRING LOADED
SLAM LATCH
K167A Complete Assembly
less strikes
M-1367
Upper Strike Plate
SLAM LATCH
565698AOOR...... Assembly with 2 offset bolts
565698AFFR ...... Assembly with 2 flush bolt
565698AOTR ..... Assembly w/1 offset &
1 tapered
565698AFOR...... Assembly w/1 offset &
1 flus
SLAM LATCH
K-168-1 - Complete Assembly less strike
Cable
Operated
K-167-B
Tapered Latch Bolt
3-1/2"x2-3/4" base
(not included with assy)
K-167-B
Tapered
Latch Bolt
565698-BZ
Flush Latch Bolt, zinc
2" x 2-5/8"L x 3/4"H
3-1/2"x2-3/4" base
K-167-R
27-3/8" Rod (2)
24-366
Optional Top
Bolt Tapered for
a snug fit OE
on UCB 2" x
2-7/8" base
K-167-BK
Brackets
for Rods
2.5"
6"
Spring
Loaded
K-167-C
Spring
Loaded
Center Mechanism
Mounting
holes
align with
K-168
Handles
Pg. 102
K-168-C
Center Mech.
Complete
6-3/16" x 2-15/16"
K-168-3
Inside Handle Only
K-168-CAB
72" Cable Assy
(one needed)
K-167-B
Tapered Latch Bolt
3-1/2" x 2-3/4" base
Mounting
holes
align with
K-168
Handles
Pg. 102
29-639
Strike 4"x 3.375" with 3"x
2.185" hole mount centers
Used on Utilimaster (not
included with assembly)
565698-CZR RH
565698-CZL LH
Center Mech. zinc, 2" x 3-3/8"
SLAM LATCH W/ OVERRIDE
Cable
Operated
121BO
Offset Bolt
3" x 2-1/16" base
K-167-S
Strike 3"x 2.75"
with 2"x 1.5" hole
mount centers (not
565698-R
26-3/4" Rod (2)
VCC-96
96"Cable
(cut to fit)
114COR
Center Mech.
with override
release handle
29-639
Strike 4"x 3.375"
with 3"x 2.185" hole
mount centers
Used on Utilimaster (not
K-167-B
Tapered
Latch Bolt
3-1/2"x2-3/4" base
565698-BOZ
2" x 2-5/8" with 9/16" Offset
Latch Bolt, zinc
121BO
Offset Bolt
3" x 2-1/16"
base
with 9/16" offset
Mounting
holes
align with
Handle
25-139
See page
102 for
details
7/21/2016 2:41:02 PM
REPLACEMENT
REAR DOOR LATCHES 105
REAR DOOR LATCHES - EXTERIOR HANDLE MUST BE TURNED BACK MANUALLY
DEAD BOLT
SPRING LOADED SLAM LATCH
DEAD BOLT
110-AOO...... Assembly with 2 offset bolts
110-AFF....... Assembly with 2 flush bolt
110-AFO...... Assembly 1 offset & 1 flush bol
as shown
114-AOO.... Assembly with 2 offset bolts
114-AFF..... Assembly with 2 flush bolt
114-AFO.... Assembly 1 offset & 1 flush bol
K-160-R
Rod (2)
33-3/8" long
110-BF
Flush Latch Bolt
3" x 2-1/8" base
110-ROD
Rod (3/8"x 36")
114-BF
Flush Latch Bolt
3" x 2-1/16" base
K-167-BK
Rod Brackets (4)
110-C
Center Mechanism
(2-1/2" x 6-1/4")
w/o spring return
Mounting
holes
align with
Handle
25-139
See page
102 for
details
K-160-C
Center Mechanism
6" x 2-1/2"
(not spring loaded)
(For spring loaded
use K-167-C)
114-ROD
3/8" x 36" Rod
114-C
Center
Mechanism
w/spring return
6-1/4" x 2-1/2"
Mounting holes align
with Handle K-168-H
Pg. 102
110-BO
Offset Latch Bolt
3" x 2-1/4" base
with 1/2" offset
K-167-S
Strike 3"x 2.75"
with 2"x 1.5" hole
mount centers (not
24-366
Rod or Chain
Pull. Tapered
for snug fit
with bolt hole on
bottom.
2" x 6-3/8"
24-368
Same as
24-366
except finger
pull type.
2" x 6-1/4"
overall length.
114-BO
Offset Latch Bolt
3" x 2-1/16" base,
1/2" offset
FINGER PULL LATCHES
Mount Centers:
1-3/8"C-C & 1-15/16"C-C
1-5/8" spring loaded
tapered tongue
K-167-BK
Rod Brackets (4)
Mounting
holes
align with
Handle
25-139
See page
102 for
details
24-360
Short Finger Pull.
Kasonized steel
finish with
1/2" round x 2"
steel rod finger pull.
Tapered for snug fit
24-362
Extended
Finger Pull
Same as
24-360
except with
1/2" round x
30" steel rod
finger pull
24-364
Offset Bolt, Spring loaded.
Zinc finish. Accepts 1/4" rod
hook. Has 9/16" offset. Fits on
back door of Newer Utilimaster
MOUNTING HARDWARE FOR REAR DOOR HANDLES & LATCHES
Part No
Size............................................................. Unit pkg
97-431-P
97-431
97-432
97-433-P
97-433
97-438-P
97-438
AV-13480
AV-13480-P
97-694
97-695
AV-729
AV-730
AV-11331
AV-11331-P
10-24 x 1/2" Phillips SS Screw..........1
10-24 x 1/2" Phillips SS Screw........100
10-24 x 3/4" Phillips SS Screw.........50
10-24 x 1" Phillips SS Screw.............1
10-24 x 1" Phillips SS Screw............50
10-32 x 1" Phillips SS Screw.............1
10-32 x 1" Phillips SS Screw............50
10-24 Aluminum Nutsert, box..........50
10-24 Aluminum Nutsert, each.........1
10-24 Kep Nut with Lock Washer....100
10-32 Kep Nut with Lock Washer....100
10-32 Standard Hex Nut.................100
10-24 Standard Hex Nut.................100
10-32 T-Nut......................................50
10-32 T-Nut.......................................1
M-39200
Nutsert Mounting Tool
M-39258
1/4" Mandrel to fit
1/4"-20 Nutsert
Stainless Steel Screws
with Phillips Head for
Mounting Handles
Aluminum Kep Nut with
Nutsert Lock Washer
Standard
Hex Nut
T- Nut
97-443
1/4"-20 x 1"L Stainless Steel
Oval Head Phillips Recess
Machine Screw, 25 pcs/box
M-47455
1/4"-20 Aluminum Thin
Sheet Nutserts, 40 pcs/box
7/21/2016 2:41:34 PM
REPLACEMENT
106 REAR
DOOR HARDWARE
HARDWARE that fit
fits UTILIMASTER QUAD DOORS
A
B
less strikes
B
K-167-B
Tapered
Latch Bolt
3-1/2"x2-3/4" base
THIS 'QUAD' DOOR
USED TWO STYLES OF SLAM
LATCH ASSYS, CABLE AND ROD
TYPE. ROD TYPE SHOWN ON
LEFT, SEE PREVIOUS PAGE FOR
CABLE TYPE.
ROD STYLE
LATCH ASSEMBLY
SHOWN
IF YOU HAVE
CABLE STYLE
SEE PREV. PAGE
K-167-R
27-3/8" Rod (2)
2.5"
97-788
Countersunk Floor Rivet
for end floor panel.
Pkg of 100
C
C
D
SHAFT FOR INSIDE
RELEASE HANDLE
Button end
stops shaft
from pulling
through
25-128 Shaft
Longer shaft
stops shaft
from falling
into door.
6"
REPLACEMENT
UPPER STRIKES
A
29-638
Upper rear outer door
strike, 7"H x 3"W.
OVERSIZE
24-364
Offset Bolt, Spring loaded.
Zinc finish. Accepts 1/4"
rod/hook. Has 9/16" offset.
Fits on back door of Newer
Utilimaster
C
Lower Strike 4"x 3.375"
with 3"x 2.185" hole
mount centers. OEM for
all lower strikes
K-167-BK
Brackets for
Rods
29-636 Upper rear
center strike,
7"H x 6"W.
for inside release
handle on quad
bifold doors.
Used with
K167C Center
29-639
K-167-C
Center Mechanism
K-167-B
Tapered
Latch Bolt
B
3-1/2"x2-3/4" base
OVERSIZE
Remove old strike and replace with oversize strike.
C
29-661 - Oversize
Lower 'outer' rear
door strike w/ single
hole. 6" W x 3.5" D
Original Lower Strike installed in floor
shown next to oversize strike (29-661)
D
29-664 - Lower 'center' rear door strike with two
holes. Measures 14"wide x 3.5" deep. Small cut on
bottom of door is required for installation
New 'Oversize' Strike installed. Holes were drilled
and screws installed where floor was still solid.
7/21/2016 2:41:56 PM
REPLACEMENT
DOOR HINGES 107
DOOR HINGES
ALL HINGES ARE MEASURED FROM CENTER OF PIN TO END OF HINGE
12"
12"
1/2" Diameter Pin
Popular on
Grumman/
Morgan Olson
Popular on
Union City Body
29-314 - 12" Aluminum Hinge with Grease Fitting High strength
aluminum alloy, stainless steel pin and washers. Cadmium
plated steel grease fitting.
35-106 - Hinged Rear Door Weatherstrip.
Sold in multiples of 10 ft. only
29-322 - 12" Aluminum Flush Hinge
3/16" Thickness
10-1/8"
or
13-1/2"
Popular on
Union City
Body
29-331 - 10-1/8" Aluminum Flush Hinge
29-328 - 13-1/2" Aluminum Flush Hinge, fits full swing doors
16"
Popular on
Utilimaster
Popular on
Union City Body
7212-36288
Steel Pin
(74" door)
Steel Hinge
M-447
Steel Corner
Bracket (74" door)
29-327 - 16" Aluminum Hinge without grease fitting. Replaces
Utilimaster 1995 and newer hinge with slight modificatio
HINGES that fifit UCBC & UTILIMASTER
14”
Leaf Type Aluminum Hinge
1/2” Diameter Pin
29-320 - 14”
Hinge with grease
fitting. Also with
gussets for extra
support (shown)
34-150
Rear Door Gasket used on
Utilimaster, 3/8" H x 5/8" W. Fits
double & quad rear swing-out
doors. 50 foot length.
29-316 - 14” Hinge without gussets or grease fitting
CONTINUOUS ALUMINUM HINGE
2"
29-300 - 2" X 72" Flush Continuous Aluminum Hinge
29-324 - 68-1/2" L
Offset Continuous
Aluminum Hinge.
Popular on Grumman/
Morgan Olson.
Hinge Strap not
available
STOP CARRIAGE BOLTS FROM SPINNING when mounted on
rear doors. Ribs stop bolt from turning while tightening nut on
other side. Threaded all the way to the rib. Popular on UCBC
and Utilimaster with hinges shown above. Can be used for other
applications as well.
99-215 - 5-16” x 1” Rib Neck
Carriage Bolt, 100 pcs.
99-230 - 5/16” x 2-1/2” Rib Neck
Carriage Bolt, 50 pcs.
97-605 - 5/16” Kep nut, 1 pcs.
6.5"
1"
1-3/4"
Mill Supply carries a variety of sizes of steel, stainless steel
and aluminum continuous hinge. Call us.
Popular on
Union City
Body &
Utilimaster
29-338 - 6-1/2" Aluminum Reverse
Butt Hinge w/grease fitting.
7/21/2016 2:42:24 PM
REPLACEMENT
108 DOOR
HARDWARE
POSITIVE DOOR HOLDER
SILENT DOOR HOLDER
760364
Rubber
Socket
30-720 Positive Door Holder Set with 3-7/8" overall projection
30-719 Male Part Only with 3-7/8" overall projection
30-718 Female Part Only
30-730 Heavy-Duty zinc plated positive door holder set with
4-1/8" overall projection . Incorporates a flat hook retaining
spring which prevents the hook from accidentally slipping out of
the keeper.
RUBBER SOCKET DOOR HOLDER
Rubber socket with black plastic plunger. A steel plate is
inserted in the rubber socket for extra strength and is threaded for
5/16"-18 bolt. 30-741 has a stainless steel cover over the rubber
socket. Sockets measure 1-1/2" dia x 1-1/2" tall.
plunger
30-741
with stainless
steel cover
over rubber
socket
30-740
standard
assembly
30-742
2-1/4" Spacer for Plunger.
Extends plunger from door.
Plunger not included.
(sold each)
SPRING ACTION DOOR HOLDER
with GREASE FITTING
30-750 - Holder Set with 3" hook
projection. Holds door against body
with heavy duty spring. Automatic
engage and disengage. Zinc coated
with stainless steel plunger spring.
Equipped with grease fitting for
lasting durability.
Receiver Dimensions
1-1/4"W x 4"L x 1-3/16"H
3-1/4" c. to c. screw holes
Hook Base Dimensions
1-1/4" L x 7/32" W
1-5/8" c. to c. screw holes
R-13760
Metal Retainer
Only
Plunger (add 3/8" for overall length)
Stock No.
Plunger Length
30-762.................... 1-1/4"
30-763.................... 1-3/4"
30-764.................... 2-1/4"
30-765.................... 2-3/4"
30-766.................... 2-3/4" w/15o offset
TUBULAR STEEL GRAB HANDLE
• 11-1/2" overall length
• 2-1/8" height off surface
• 5" grab length
• 5/8" diameter tubular steel
• 9/32" holes (4)
27-524
Chrome Finish
1/2" ALUMINUM or STEEL ROD GRAB HANDLE
• 13" overall length
• 2" height off surface
• 7" grab length
• 1/2" diameter aluminum/steel rod
• 1/4" countersunk holes (4)
27-521
Steel handle with chrome plating
27-522
Aluminum handle
with plain finis
HEAVY DUTY DIE CAST HANDLE
• 4-1/2" grab length
• 5/16" countersunk holes (4)
• Wide comfort grip handle
27-526
Chrome Handle
SOLID ALUMINUM GRAB HANDLE
NYLON SOCKET DOOR HOLDER
Door Holder with
Nylon Insert
Part No.
30-771
30-772
30-773
Overall length
w/nylon receptacle
1-1/2"
2-1/2"
3-1/2"
30-770
Nylon
Receptacle
27-525 Aluminum Handle
• 9-1/2" grab length
• 1-1/4" width
• 5/16" holes (4)
27-528 Aluminum Handle
• 18" overall length
• 3" height off surface
• 9" grab length
• 1" width
• 1/4" holes (4)
7/21/2016 2:42:44 PM
dle
SINGLE BOLT PADDLE LATCHES
REPLACEMENT
DOOR LATCHES 109
ROTARY LATCHES
LARGE STYLE - REPLACES STAHL PADDLE LATCH
ROTARY PADDLE LATCH
Overall Dim: 5-1/4” x 6-1/2”
Hole size: 4-1/4” x 5-1/2”
Overall Dim: 4-1/4” x 5-1/2” — Hole Size: 3-1/4” x 4-1/2”
23-150 - Rotary
Latch, Polished
Stainless Steel.
Includes cylinder
and key.
4960Z - Paddle
style latch with
cylinder and
Key, zinc
STANDARD SIZE - SINGLE POINT LATCHES
Overall Dim: 4-1/4” x 5-1/2”
Hole Size: 3-3/8” x 4-5/8”
23-098
Cylinder & key
with bent cam
23-005... Locking - Rustproof Steel
23-255... Non-Locking - Rustproof Steel
23-075... Non-Locking -Zinc Coated Steel
with Heavy-Duty Slam Action Latch
23-010.... Locking - Stainless Steel
23-260... Non-Locking - Stainless Steel
4-1/2” x 5-1/2” w/1/2” flange
10330-35 - Rotary Compartment Latch
with primary and secondary latching
positions. Includes cylinder and key.
Zinc plated. Use strike bolt 70-100.
70-100 Striker Bolt Zinc plated and
heat treated to comply with SAE grade
8 specification
2-POINT DEAD BOLT “T” HANDLE
Overall Dim:4-7/8” x 4-3/4”
Hole Size: 3-3/4” x 3”
plus cylinder.
4901-51
Cylinder & key
with straight cam
JUNIOR SIZE - SINGLE POINT LATCHES
Overall Dim: 3-5/8” x 4-11/16”
Hole Size: 2-3/4” x 3-3/4”
23-015 23-265
23-020
23-270
SINGLE ROTARY COMPARTMENT LATCH
Locking - Rustproof Steel
Non-Locking - Rustproof Steel
Locking - Stainless Steel
Non-Locking - Stainless Steel
23-086 Cylinder and Key for
all Junior Size Latches
Single Point “T” Handle Latch
Overall Dim: 4-3/4” x 4-7/8”
Hole size: 3-1/8” x 3-3/4” plus cylinder
8400Z - “T” Handle Latch Single point lock with adjustable
latch for varied door thickness. Zink plated.
8400-61 Replacement Cylinder and key for 8400Z
15-621 Replacement cylinder & Key for old style 8004Z
4874 Gasket only
Rod: 5/16” dia. x 48” L
4876 . ....... Turn style “T” Handle, Center only, Zinc
4876SS..... Turn Style”T” Handle, Center only, Stainless Steel
4880......... Turn style “T” Handle complete assembly, Zinc
Includes: center, 48” x 5/16” dia. rods (cut to length), (2) rod guides.
4880-SS.... Same as 4880 except Stainless Steel.
4874.......... Gasket only
99-561...... Slam Latch
“D” RING 2-POINT LOCK
6 1/8”
2102-L
Polished Stainless Steel “D” Ring Lock,
2-Point Lock. 2 Rods included
3-5/8”
1400L - Rotory
Latch LH
1400R - Rotary
Latch RH (shown)
9/64”
7 1/16”
ROD CONTROLLED PADDLE LATCH
Overall Dim: 5-3/4” x 4-3/4”
Hole size: 3-3/8” x 4-1/2”
23-175 - Rod controlled paddle latch,
center only, Stainless Steel. This
paddle latch accepts rods or cables.
COMPARTMENT DOOR HINGE
ROTARY LATCH
99-561
243LH - Left
Hinge, Alum
243RH - Right
Hinge, Alum
LATCH CAM
25-175 - Latch
Cam with set screw.
Fits 5/16” sqaure
shaft. Overall
length: 2-3/4”.
7/21/2016 2:42:54 PM
REPLACEMENT
110 BULKHEAD
DOOR PARTS
ALL THE HARDWARE NEEDED TO ASSEMBLE
A BULKHEAD IN YOUR STEP VAN
10,11,12
1
3,4,5
18
Bulk Head
Wall
Between Cab
and Cargo
Area
Non-Locking hardware
option, See the
following page
Bulk
Head
Door
(Wood for door
not provided)
Choose either 1/2"
or 3/4" Plywood and
attach the hardware
shown to build a bulk
head door.
9
18
26, 27, 28
13,14,15,16,17
Locking Door
handle option.
See hardware
on the following
page.
6, 7, 8
Mill Supply only carries the hardware, you are
responsible for the material for the wall and door.
Parts list for Unsecure, Secure & Very Secure Bulk Head Door
Universal Unsecure
Bulkhead Door Parts List
This list of parts is for installing a
non-locking 3/4” plywood bulkhead door.
Qty.. Part No...... Desc
1...... 29-800...... Upper Track
8...... ST-34........ Mounting Stud
1...... 1101330..... 26” Upper door hanger
1...... 29-105....... Lower Wearstrip
1...... 29-125 . .... Lower Floor Track
2...... 760364...... Bumper
2...... 29-647....... Strike
1...... 24-368....... Finger Pull Latch
Universal Secure Bulkhead
Door Parts List
This list of parts is for installing a medium
secure locking 3/4” plywood bulkhead door.
1...... 29-800...... Upper Track
1...... 29-105....... Lower Wearstrip
1...... 29-125....... Lower Floor Track
2...... 760364...... Bumper
1...... 25-130....... Inside Handle
1...... 25-116....... Locking Handle
1...... 56965........ Latch Mechanism
2...... 29-633....... Strike
Universal Very Secure
Bulkhead Door Parts List
This list of parts is for installing a locking
high secure 3/4” plywood bulkhead door.
1...... 29-800...... Upper Track
1...... 29-105....... Lower Wearstrip
1...... 29-125....... Lower Floor Track
2...... 760364...... Bumper
1...... 29-730....... Cylinder Housing
1...... 29-709....... Cylinder Core & Keys
1...... 22-201....... Latch Mechanism
1...... 29-633....... Strike
1...... 27-526....... Chrome Handle
1...... 24-368....... Tapered Finger Bolt
1...... 29-647....... Upper Strike
7/21/2016 2:42:56 PM
REPLACEMENT
BULKHEAD DOOR PARTS 111
BULKHEAD DOOR HARDWARE
TRACKS, HANGERS &
WEARSTRIPS
STRIKES & STOPS
13
10
2
11
Fits 1/2"
wall
12
1
14
15
2-1/2"
3
16
2-7/8"
17
18
HANDLES & LATCHES
4
26
5
21
20
Popular on Utilimasater
Uses 29-635 strike
6
7
28
27
25
23
8
22
24
30
29
9
32
33
Tracks, Hangers, & Wearstrips
1.....29-800............... 84" Sliding door track
2.....ST-34................. 1/4" Mounting Stud for track. 8 Needed.
3.....29-3612............. 1/2" Door hanger. 36" Long.
3.....29-3634............. 3/4" Door hanger. 36" Long.
3.....29-2634............. 3/4" Door hanger. 26" Long.
4.....11-01330........... 28" Offset hanger
5.....29-2510...........25-3/8" Door hanger, popular on Uilimaster
6.....29-105............... 2" x 1/4" x 36" Nylon wearstrip for aluminum doors
7.....M-1141.............. 30" Metal door guide for 3/4" wood doors
8.....29-103............... 24-1/2" Door guide w/alum. edge for 1/2" wood doors
9.....29-125............... Polyethylene lower door track. 51.5" Long
Strikes & Stops
10....29-647............... Bulkhead upper door strike, universal
11....29-601............... Bulkhead upper door strike
12....29-602............... Bulkhead upper door strike
13....29-635............... Bulkhead door strike for Utilimaster
14....29-633............... Bulkhead door strike
15....29-631............... Bulkhead door strike
16....M-1623.............. Bulkhead door strike for Utilimaster
17....29-659............... Bulkhead door strike for Utilimaster
18....760364.............. Rubber door stop
31
41
40
rear view
34
35
Handles & Latches
20...K-4000.............. Door latch
21...K-4002.............. Door latch with web handle
22...K-4001.............. Chrome handle, 3/8" x 1-15/16" shaft
23...25-116................ Locking handle with turn cylinder
24...56965................. Sliding door latch
25...25-130............... Inside handle
26...120-S................. Latch bolt with "Side Slam" action.
Includes bottom bolt for chain
27...24-366............... Latch bolt used with rod or chain
28...24-368............... Finger pull latch bolt
29...97-443-P........... 1/4"-20 x 1" L Oval head screw
30...M-1606-P.......... 1/4"-20 Nylon lock nut
31...22-201............... Steel latch mechanism with brass catch
32...29-715............... Brass cylinder housing
33...29-730............... Flat head style brass cylinder housing
34...29-709............... One cylinder core with 1 install key & 2 operator keys
34...29-713............... Two cylinder cores with 1 install key & 4 operator keys
35...29-708............... Key blank
Remote Lock/Unlock
40...36-991............... Solenoid for remote lock/unlock
41...29-617............... Strike for bulkhead door with solenoid
7/21/2016 2:43:52 PM

For some of the best Stepvan Creations check out our

Transcription

Similar documents

Zak McKracken – Mayan Maze Map

Rilo Kiley After Hours

SILENTIUM PM 42S

Adult NL Spring 14.pages

4 Lyon Grove, Worsley, Manchester £210,000

hawa-junior 80 and 80/b sliding door system

Bobs Stores

Manual Doors for ICU/CCU Rooms

Icerette Promo - Raritan Engineering

LG Fridge LSFXC2476S Specs