MAJOR STEEL ERECTOR CONTRACTOR

LIVE ON-SITE
& WEBCAST
AUCTION
CAN’T MAKE IT IN PERSON?
All Internet bidders must register
for this auction at least 72-Hours
Prior to the Sale Date.
Friday, January 20, 2012
ONLINE BIDDING AVAILABLE
Beginning at 10:00am CST
2809 East 85th Street, Kansas City, MO 64132
Preview: Thursday, January 19, 9:00am to 4:00pm CST
Over 1,300
Lots!
Equipment No Longer Required in the
Ongoing Operations of:
MAJOR STEEL ERECTOR CONTRACTOR
2002
2005
FREIGHTLINER / ALTEC 26 TON TRUCK CRANE
CRANES
VEHICLES
WELDING EQUIPMENT
1999
STERLING / NATIONAL CRANE 33 TON
TRUCK CRANE
ERECTION EQUIPMENT
SAFETY EQUIPMENT
GENERATORS
VOLVO / MANITEX 38 TON
TRUCK CRANE
COMPRESSORS
MATERIAL HANDLING
AND MUCH MORE!
ONSITE BIDDER INSTRUCTIONS:
$500 cash minimum registration deposit or 25% of approximately bid amount (whichever is greater) via wire transfer, cashier’s check or company
check accompanied by a bank letter of guarantee all prior the auction. Please refer to www.biditup.com for complete registration information.
ONLINE BIDDER INSTRUCTIONS:
All internet bidders must register for this auction at least 72-hours prior to the sale date, if you do not you will not be approved. All internet
bidders must provide a wire transfer deposit of approximatly 25% of your planned spending amount or $5,000 minimum in order to be approved
to bid. Those who do not post the deposit will not be approved. Period. Please refer to www.bidspotter.com for online bidder terms.
Technical Advisors to the Sale:
BIDITUP AUCTIONS & APPRAISALS WORLDWIDE
818.508.7034 • www.biditup.com
2005 FREIGHTLINER / ALTEC 26 TON TRUCK CRANE, VIN: 1FVHC30J35HY06739, Mercedes Benz 330
HP Engine, Eaton Fuller 10 Spd, Twin Screw, w/Altec Series AC26 Crane, 113' Telescopic Boom, Altec Load
Moment and Area Protection System
2002 STERLING / NATIONAL CRANE 33 TON TRUCK CRANE, VIN: 2FZHAZAN53AL06007, C-10 Cat,
320 HP Engine, 9 Spd. Road Ranger, Twin Screw, Hendrickson Pup Axle, National Crane Truck Mount Crane,
Mdl. 1400H, S/N 35772, 100' Telescopic Boom, w/Swing Away Jib, PAT DS-160 L.M.I.
1999 VOLVO / MANITEX 38 TON TRUCK CRANE, VIN: 4VHJCABE2XN863666, Cat 3306C Engine,
300 HP, Eaton Fuller 9 Spd., 22' Flat Bed, Twin Screw, Manitex Hydraulic Crane, Mdl. M381003, Pat Mdl.
DS50/0002 L.M.I., (4) Section Telescopic Boom to 100' w/Swing Away Jib
1999 WESTERN STAR / MANITEX 30 TON TRUCK CRANE, VIN: 2WLPCOBE4XK958568, 3306 Cat Engine,
Eaton Fuller 10 Spd, Twin Screw, w/Manitex Crane, Mdl. M30100, 100' Telescopic Boom, PAT DS-150 L.M.I.
1988 FORD L8000 BOOM TRUCK, VIN 1FDZY90W9JW9JVA42773, 66' Boom, 25' Jib
BRODERSON 12,000# DECK CRANE, Mdl. 1C701A, S/N 295B, 30' Telescopic Boom, w/Aux. Jib
CRANES
2005 FORD F450 XL SUPER DUTY TRUCK, VIN: 1FDXF46PX5EA02465, 12' Knapheide Utility Bed,
w/Ladder Racks, Power Stroke V-8, Automatic
2005 FORD F450 XL SUPER DUTY TRUCK, VIN: 1FDXF47P75EC29689, 4WD, 12' Flat Bed, w/Tommy
Lift Gate, Power Stroke V-8, Automatic
2004 FORD F450 XL SUPER DUTY TRUCK, VIN: 1FDXF46P15EA02466, 12' Knapheide Utility Bed,
w/Ladder Racks, Power Stroke V-8, Automatic
2004 FORD F450 XL SUPER DUTY TRUCK, VIN: 1FDXF46PX5EAO8962, 12' Knapheide Utility Bed,
Power Stroke V-8, Automatic
2002 FORD F450 XL SUPER DUTY TRUCK, VIN: 1FDXF46F13EA38663, 12' Omaha Utility Bed,
Power Stroke V-8, Automatic
(2) 2008 FORD F450 XL SUPER DUTY TRUCKS, VINʼs: 1FDXF46Y28ED37829, 1FDXF46Y38ED37838
2006 FORD F450 XL SUPER DUTY TRUCK, VIN: 1FDXF46Y77EB16869, 12' Knapheide Utility Bed,
w/Ladder Racks, V-10, Automatic
2006 FORD F450 XL SUPER DUTY TRUCK, VIN: 1FDX46Y17EB28466, 12' Omaha Utility Bed, w/Ladder
Racks, V-10, Automatic
2005 FORD F450 XL SUPER DUTY TRUCK, VIN: 1FDX46Y56EC08187, 12' Omaha Utility Bed, V-10, Auto.
2005 FORD F450 XL SUPER DUTY TRUCK, VIN: 1FDXF46Y16EA03594, 12' Knapheide Utility Bed, V-10, Auto.
2006 FORD F350 XL SUPER DUTY TRUCK, VIN: 1FDWF36Y57EA20180, 12' Omaha Utility Bed, w/Ladder
Racks, V-10, 6 Spd. Manual
2007 FORD F350 XL SUPER DUTY, VIN: 1FDWF36Y27EA08245,
(2) 2009 FORD F250, VINʼs: 1FTSX20509EA75728, 1FTSX20549EA04824
2007 FORD XL SUPER DUTY, VIN: 1FTSW21578EB47802, 4 Door Crew Cab, Short Bed, 4WD, V-10, Auto.
2007 FORD EXPEDITION, VIN: 1FMFK20557LA89502
2007 FORD EXPLORER, VIN: 1FMEU75857UA84459, V-8, Automatic
1993 FORD L8000, VIN: 1FDXR82A4PVA01332, 23' Flat Bed, Ford 7.8L Diesel, 210 HP, 6 Speed, Lift Gate
1998 FORD F450 XL SUPER DUTY TRUCK, VIN: 3FDXF4650XMA16263, 12' Stahl Utility Bed, V-10, Auto.
2001 FORD F450 XL SUPER DUTY TRUCK, VIN: 1FDXF46S11ED73593, 12' Knapheide Utility Bed, V-10, Auto.
2005
VEHICLES
NELSON PORTABLE DIESEL POWERED DUAL GUN STUD WELDING SYSTEM, w/Series 6000/ 210 Dual
Gun Stud Welder, Mdl. 750-536-000, S/N SMF-9903. Cummins 345 HP Engine, Mdl. M11-G1
NELSON STUD WELDERS, Mdl. NH-20S-HD
WELDING STUDS & FERRULES
LINCOLN PORTABLE WELDER, Mdl. Shield Arc SAE 400, K1278-5, S/N C1031200183, Diesel, w/Trailer
(2) MULT QUIP PORTABLE WELDERS, Mdl. BLW-300SS
(4) MILLER PORTABLE WELDERS, Mdl. Trailblazer 302, S/Nʼs LH390744Q, LH450511Q, LG084075, LH390717Q
MILLER PORTABLE WELDER, Mdl. Trailblazer 250 G, S/N KC244631
MILLER PORTABLE WELDER, Mdl. Trailblazer 251 T, S/N KJ136262
(4) MILLER PORTABLE WELDERS, Mdl. Legend NT, S/Nʼs KK126394, KK166803, KK126392, LA119765
(9) MILLER PORTABLE WELDERS, Mdl. Legend 301 G, S/Nʼs LC357099, LE115038, LC357100, LC357102,
LE059785, LC357090, LE059790, LC361451, LC357097
MILLER PORTABLE WELDER, Mdl. Trailblazer 251, S/N KH357133
(2) MILLER PORTABLE WELDERS, Mdl. Legend, S/Nʼs KG018105, KE578943
(12) MILLER PORTABLE WELDERS, Mdl. Bobcat 225 NT, S/Nʼs KK157385, KJ015700, KH157387,
KH433078, KJ063359, KJ003372, KJ003376, KH539602, KK037546, KJ063556, KG161710, KG174643
(2) MILLER 6 PACK WELDING POWER SUPPLIES, Mdl. XMT 350 VS
MILLER WELDING POWER SUPPLY, Mdl. MO-750, S/N HE743854
(3) MILLER WELDING POWER SUPPLIES, Mdl. Dialarc 250, S/Nʼs JK731646, JJ483534, JC630574
(4) MILLER WELDING POWER SUPPLIES, Mdl. Ramrod, S/Nʼs JA387171, JA387147,
HF859899, HF825586
(2) LINCOLN WELDING POWER SUPPLIES, Mdl. Idealarc DC-250, S/Nʼs U1931004951, U1931107321
(2) RED D ARC WELDING POWER SUPPLIES, Mdl. E300
LINCOLN WELDING POWER SUPPLY, Mdl. AC/DC 225/125
(4) MILLER WELDING POWER SUPPLIES, Mdls. MOG 250/250A, MEHD-633, MEHD-709, MEHD-606
(17) MILLER PORTABLE MIG WELDING FEEDERS, Mdl. Suitcase X-Treme 12 VS
(5) LINCOLN PORTABLE MIG WELDING FEEDERS, Mdl. LN-25 Suitcase
MILLER MIG WELDER, Mdl. Millermatic 210, w/Mini Spool Gun
(2) LINCOLN MIG WELDING MACHINES, Mdls. SP-130T, SP-100T
CENTURY MIG WELDING MACHINE, Mdl. 90 Amp
MILLER MIG WELDING MACHINE, Mdl. Millermatic 140
HOBART MIG WELDING MACHINE, Mdl. Handler 135; WELDING POWER SUPPLY, Mdl. CD-500
MILLER WELDING POWER SUPPLY, Mdl. Thunderbolt XL
DYNAFLUX ROD OVENS; WELDING ELECTRODES
WIRE, CARBON ARC & SUPPORT
WELDING LEAD; WELDING SCREENS; FRESH AIR WELDING HOODS
LARGE QUANTITY OF WELDING CONSUMABLES & MACHINE PARTS
WELDING
FREIGHTLINER / ALTEC TRUCK CRANE
2002
STERLING / NATIONAL TRUCK CRANE
1999
VOLVO / MANITEX TRUCK CRANE
1999
WESTERN STAR / MANITEX TRUCK CRANE
ONSITE BIDDER INSTRUCTIONS: $500 cash minimum registration deposit or 25% of approximately bid amount (whichever is greater) via wire transfer, cashier’s check or company check accompanied
by a bank letter of guarantee all prior the auction. Please refer to www.biditup.com for complete registration information.
ONLINE BIDDER INSTRUCTIONS: All internet bidders must register for this auction at least 72-hours prior to the sale date, if you do not you will not be approved. All internet bidders must provide
a wire transfer deposit of approximatly 25% of your planned spending amount or $5,000 minimum in order to be approved to bid. Those who do not post the deposit will not be approved. Period. Please
refer to www.bidspotter.com for online bidder terms.
1988
1 OF 2
FORD L8000 BOOM TRUCK
BRODERSON DECK CRANE
2006
FORD F450 XL SUPER DUTY TRUCK
2005
2004
1 OF 2
FORD F450 XL SUPER DUTY TRUCK
2007
1 OF 4
FORD F450 XL SUPER DUTY TRUCK
1 OF 2
FORD F450 XL SUPER DUTY TRUCK
2009
2007
1 OF 2
FORD XL SUPER DUTY TRUCK
FORD F250 TRUCK
(14) HILTI POWDER ACTUATED DECK INSTALLATION TOOLS, Mdl. DX 860-ENP
(9) PNEUTEK AIR POWERED DECK FASTENING GUNS, Mdl. PT-1300
(14) HILTI STAND UP DECK FASTENERS, Mdl. SDT 30
HILTI POWDER ACTUATED FASTENING GUNS
HILTI, BOSCH, BLACK & DECKER & DEWALT ROTARY HAMMER DRILLS
MILWAUKEE PORT A BAND SAWS
(9) STIHL GAS POWERED CUT OFF SAWS
MILWAUKEE, BLACK & DECKER & DEWALT ELECTRIC IMPACT DRIVERS
TONE & MAKITA SHEAR WRENCHES
TONE & PROTO TORQUE MULTIPLIERS
HUGE QUANTITY OF HILTI FASTENERS, POWDER CHARGES, ADHESIVES & ANCHORING
SYSTEMS
HILTI & MILWAUKEE DIAMOND CORE DRILLING MACHINES & BITS
FEIN, MAGNATECH & SLUGGER MAGNETIC BASE ANNULAR CUTTERS
JOBOX, KNAACK & TRYSTAR FIELD GANG BOXES
SCAFFOLDING
EXTENSION & STEP LADDERS, 6ʼ to 50ʼ
SUMNER ROUST-A-BOUT MATERIAL LIFTS
PORT-A-LITE PORTABLE FANS & LIGHTS
MILWAUKEE, DELTA, HILTI & MAKITA METAL & WOOD SAWS
CHAIN & LEVER HOISTS
PELSUE DUCT FANS & FLEXIBLE DUCT
IMPACT GUNS, JACK HAMMERS, AIR REAMERS, SOCKET SETS, HAND TOOLS, RIGHT
ANGLE GRINDERS, DOLLIES, BESSEY & C-CLAMPS
(20+) LASERS, EYE LEVELS & LASER PLUMBS
ERECTION EQUIPMENT
Over 1,300
Lots!
FORD EXPLORER
SAFETY EQUIPMENT
FALLTECH, SALA & MILLER SELF RETRACTING LIFELINES, LANYARDS, SAFETY HOOKS,
SAFETY HARNESSES, BEAM ANCHORS, FIRST AID KITS & SUPPLIES
SINCO BEAM SAFE SAFETY BRACKETS, COUPLERS & CABLE
FIRE EXTINGUISHERS
2006 ATLAS COPCO 125 KVA PORTABLE GENERATOR, Mdl. QAS108JDS, Product # 8972822651,
S/N USA017605, 100KW/125KVA, 480/240/208 Volt, John Deere Diesel Power, Tandem Trailer
AMERICAN TEMPORARY POWER DISTRIBUTION CENTER
BRIGGS & STRATTON 5,500 WATT GENERATOR
(3) MULTI QUIP 170 AMP WELDERS/4,000 WATT GENERATORS, Mdl. ACX-170S
(2) TORINO 8,000 WATT GENERATORS
GENERATORS
COMPRESSORS
(2) SULLAIR 185 CFM PORTABLE COMPRESSORS, MDL. 185 DPQ JD
EMGLO 18 HP, 4 STAGE PORTABLE AIR COMPRESSOR PACKAGE
HILTI 13 HP, 4 STAGE PORTABLE AIR COMPRESSOR PACKAGE
500 GALLON AIR VOLUME TANK
CLARK 3,000# WALKIE FORKLIFT, Mdl. ST30B, S/N ST245-0237-4710 FA
GRASSHOPPER LIFTING/MOVING JIB
SUMNER, GENIE & LYNX MANUAL MATERIAL LIFTS
SKY CLIMBER SCAFFOLD HOISTS, Mdl. ME4
(2) CROSBY 55,000# BEAM LIFTERS
RIGGING SHACKLES, PLATE CLAMPS, LIFTING STRAPS & SLINGS, BUX DC MAGNET, SIMPLEX
RATCHET JACK STANDS, SCREW JACKS, REEVING BLOCKS,
MATERIAL HANDLING
ONSITE BIDDER INSTRUCTIONS: $500 cash minimum registration deposit or 25% of approximately bid amount (whichever is greater) via wire transfer, cashier’s check or company check accompanied
by a bank letter of guarantee all prior the auction. Please refer to www.biditup.com for complete registration information.
ONLINE BIDDER INSTRUCTIONS: All internet bidders must register for this auction at least 72-hours prior to the sale date, if you do not you will not be approved. All internet bidders must provide a
wire transfer deposit of approximatly 25% of your planned spending amount or $5,000 minimum in order to be approved to bid. Those who do not post the deposit will not be approved. Period. Please
refer to www.bidspotter.com for online bidder terms.
NELSON PORTABLE DIESEL POWERED DUAL GUN STUD
WELDING SYSTEM
NELSON STUD WELDERS
1 OF 2
MULT QUIP PORTABLE WELDERS
LINCOLN SHIELD ARC SAE 400 PORT. WELDER
6 AVAILABLE
MILLER PORTABLE WELDERS, MDL. TRAILBLAZER
MILLER PORTABLE WELDERS, MDL. LEGEND
2006
12 AVAILABLE
MILLER PORTABLE WELDERS, MDL. BOBCAT
ATLAS COPCO 125 KVA PORT. GENERATOR
15 AVAILABLE
1 OF 2
TORINO GENERATOR
1 OF 2
MULTI QUIP WELDER/GENERATOR
1 OF 2
BRIGGS & STRATTON GENERATOR
FIRE EXTINGUISHERS
SULLAIR PORTABLE COMPRESSOR
HILTI & PNEUTEK DECK FASTENERS
EMGLO PORTABLE COMPRESSOR
HILTI CORE DRILLS
HILTI PORTABLE COMPRESSOR
MILWAUKEE PORTA A BANDS
WIRELINE LIFTING SLINGS
VIEW OF SAFETY EQUIPMENT
WELDING LEAD
CAN’T MAKE IT IN PERSON?
ONLINE BIDDING AVAILABLE
CLARK 3,000# WALKIE FORKLIFT
MATERIAL LIFTS
CROSBY 55,000# BEAM LIFTERS
ONSITE BIDDER INSTRUCTIONS: $500 cash minimum registration deposit or 25% of approximately bid amount (whichever is greater) via wire transfer, cashier’s check or company check accompanied
by a bank letter of guarantee all prior the auction. Please refer to www.biditup.com for complete registration information.
ONLINE BIDDER INSTRUCTIONS: All internet bidders must register for this auction at least 72-hours prior to the sale date, if you do not you will not be approved. All internet bidders must provide
a wire transfer deposit of approximatly 25% of your planned spending amount or $5,000 minimum in order to be approved to bid. Those who do not post the deposit will not be approved. Period. Please
refer to www.bidspotter.com for online bidder terms.
FOR SALE BY PRIVATE NEGOTIATION ONLY!
CONTACT RICK KRUGER AT 323.587.1887
1999
6’ x 1/2” CAP.
BERTSCH HYDRAULIC INITIAL PINCH POWER ROLL
8’ x 5/8” CAP.
WEBB INITIAL PINCH POWER ROLL
10’ x 9/16” CAP.
BERTSCH INITIAL PINCH POWER ROLL
1997
16’ x 3/4” CAP.
WEBB INITIAL PINCH POWER ROLL
36’ x 175 TON CAP.
CINCINNATI CNC HYD. PRESS BRAKE
PACIFIC TANDEM HYD. PRESS BRAKES
14’ x 400 TON CAP.
PACIFIC CNC HYDRAULIC PRESS BRAKE
1997
20’ x 400 TON CAP.
CINCINNATI HYDRAULIC PRESS BRAKE
2002
8’ x 225 TON CAP.
1997 PACIFIC CNC HYD. PRESS BRAKE
12’ x 1/4” CAP.
CINCINNATI HYDRAULIC POWER SHEAR
CINCINNATI POWER SHEAR
BERTSCH INITIAL PINCH POWER ROLL, Mdl. 11, S/N M10005, 9/16" Capacity (Mild
Steel), 10' Max. Working Length, Equipped With: Air Drop End, Cone Rolling Attachment,
Power Rear Roll & Bottom Roll Adjustment (Located in: So El Monte, CA)
WEBB INITIAL PINCH POWER ROLL, Mdl. 16L-2, 3/4" Capacity (Mild Steel),
16' 2" Maximum Working Length (Located in: Branchburg, NJ)
1997 CINCINNATI CNC HYDRAULIC PRESS BRAKE, Mdl. 175CB x 10, S/N 49715,
175 Ton, 12' Length of Bed & Ram, Equipped With: Cincinnati 2 Axis CNC Back Gauge,
ISB Merlin Light Curtains (Located in: Huntington Park, CA)
PACIFIC TANDEM HYDRAULIC PRESS BRAKES, Mdl. K175-20.5 & K175-16.5,
S/N 9406 AND 9405, Specifications: 175 Ton, 20.5' Length of Bed & Ram, 175 Ton, 16' 5"
Length of Bed & Ram, Equipped with: PSC-1000 Programmable Ram Control
Huntington Park, CA)
PACIFIC CNC HYDRAULIC PRESS BRAKE, Mdl. K400- 14, S/N 5244, 400 Ton, 14' Length
of Bed & Ram, Equipped With: Hurco Autobend 6 CNC Back Gauge, Protech Eagle Light
Curtain (Located in: Huntington Park, CA)
CINCINNATI HYDRAULIC PRESS BRAKE, Mdl. 400FM x 16, S/N 41178, 400 Ton, 20ʼ
Length of Bed & Ram, Equipped With: Programmable Ram Control, Dual Palm Control
(Located in: Gardena, CA)
CINCINNATI CNC HYDRAULIC PRESS BRAKE
2000
12’ x 3/8” CAP.
1999 BERTSCH HYDRAULIC INITIAL PINCH POWER ROLL, Mdl. 50-06, S/N M-10918,
1/2" Capacity (Mild Steel), 6' Max. Forming Length, Equipped With: Hydraulic Tilt of Lateral
Roll for Cone Rolling, Full 1/2" Prebending, Hydraulic Drop End, Digital Readout for Each
Roll, Rectilinear Guides, Electronic Roll Leveling (Located in: Huntington Park, CA)
WEBB INITIAL PINCH POWER ROLL, Mdl. 9L- 1208, 5/8" Capacity (Mild Steel), 8' Max.
Forming Length, Equipped With: Air Drop End, Power Rear Roll Adjustment (Located in:
(Located in: Huntington Park, CA)
12’ x 175 TON CAP.
6’ x 1/2” CAP.
CINCINNATI POWER SHEAR
10’ x 1/4” CAP.
ACCURSHEAR HYDRAULIC POWER SHEAR
24” BLADE
HILL ACME ALLIGATOR SHEAR
1997 PACIFIC CNC HYDRAULIC PRESS BRAKE, Mdl. K225-8, S/N A1332, 225 Ton, 8' Length of Bed
& Ram, Equipped With: Hurco Autobend 7, 2 Axis CNC Back Gauge, STI Light Curtains (Located in:
1980 CINCINNATI CNC HYDRAULIC PRESS BRAKE, Mdl. CB175 x10, S/N 42738, 175 Ton,
12' Length of Bed & Ram, Equipped With: Automatic G - 24 Single Axis CNC Back Gauge, Dual Palm
Control on Ram (Located in: Huntington Park, CA)
CINCINNATI POWER SHEAR, Mdl. 2506, S/N 34887, 1/2" Capacity (Mild Steel), 6' Max. Cutting
Length, Equipped With: Front Operated Power Back Gauge With Indicator, Square Arm (Located in:
Huntington Park, CA)
2002 CINCINNATI HYDRAULIC POWER SHEAR, Mdl. 250 HS, S/N 52377, 1/4" Capacity (Mild Steel),
12' Max. Cutting Length, Equipped With: Front Operated Power Back Gauge With Indicator, Power
Rake Angle Adjustment Control, Power Length Of Stroke Control, Square Arm (Located in: Branchburg, NJ)
CINCINNATI POWER SHEAR, Mdl. 2512, S/N 40982, 3/8" Capacity (Mild Steel), 12' Max. Cutting
Length, Front Operated Power Back Gauge with Indicator, Square Arm (Located in: Huntington Park, CA)
2000 ACCURSHEAR HYDRAULIC POWER SHEAR, Mdl. 625010, S/N 3870, 1/4" Capacity (Mild
Steel), 10' Max. Cutting Length, Equipped With: Front Operated Programmable Power Back Gauge,
Square Arm (Located in: Huntington Park, CA)
HILL ACME ALLIGATOR SHEAR, Mdl. 22 A, 24" Blade Size, Equipped With: Air Clutch & Brake,
Air Vertical Material Clamp (Located in: Huntington Park, CA)
Huntington Park, CA)
Technical Advisors
to the Sale:
2005
FEATURED AUCTION
Jan. 20 at 10am CST
Kansas City, MO
2006
Over 1,300
Lots!
Equipment No Longer Required in the
Ongoing Operations of: BSC STEEL, INC.
FREIGHTLINER / ALTEC TRUCK CRANE
MAJOR STEEL
ERECTOR
CONTRACTOR
NELSON PORTABLE DIESEL POWERED
DUAL GUN STUD WELDING SYSTEM
ATLAS COPCO 125 KVA PORT. GENERATOR
MACHINERY AUCTION, LOOK INSIDE!
ATTENTION: PLANT MANAGER
OR EQUIPMENT BUYER
11426 Ventura Boulevard
Studio City, California 91604
Phone: 818.508.7034
Fax: 818.508.3025
[email protected]
Brian Holland
Steven Mattes
For a Complete Listing of Upcoming Auctions
Visit www.BIDITUP.com
Register Online and Receive Auction
Updates and Information via E-mail.
Missouri Licensed Auctioneers
CAN’T MAKE IT IN PERSON?
ONLINE BIDDING AVAILABLE:
FINANCING & LEASING
FOR ALL YOUR EQUIPMENT NEEDS
Apply Online at www.charcolecapital.com
FEATURED AUCTION
Equipment No Longer Required in the
Ongoing Operations of: BSC STEEL, INC.
AUCTION: Friday, January 20 at 10:00am CST
LOCATION: 2809 East 85th St., Kansas City, MO 64132
PREVIEW: Thurs., Jan.19, 9:00am to 4:00pm
MAJOR STEEL ERECTOR CONTRACTOR
KANSAS CITY MARRIOTT COUNTRY CLUB PLAZA – Tel. (816) 531-300
4445 Main Street, Kansas City, MO 64111
COURTYARD KANSAS CITY COUNTRY CLUB PLAZA – Tel. (816) 285-9755
4600 JC Nichols Parkway, Kansas City, MO 64112
LODGING
DIRECTIONS
Over 1,300
Lots!
FROM: KANSAS CITY INTERNATIONAL AIRPORT
Head South on I-29S / US-71S Approximately 28 Miles to 85th Street / Blue River
Road / Hickman Mills Road Exit, West on 85th Street 1/2 Mile to Sale Site on Right.
Signs will be posted.
UPCOMING AUCTION CALENDAR
ONSITE &
WEBCAST
ONLINE
AUCTION
MOUNTAIN CITY MEAT – In Conjunction with Harry Davis & Company
THE MOST MODERN AND EFFICIENT MEAT OPERATIONS IN THE INDUSTRY
Wednesday, January 18, 2012 at 10:00am CST • Nashville, TN
Wednesday, January 25, 2012 at 10:00am MST • Denver, CO
(3) METAL BUILDING PANEL PROFILE ROLL FORMING LINES WITH TOOLING
BIDDING CLOSES: Tuesday, January 31, 2012 at 2:00pm (EST)
ASSET LOCATION: Eastman, Georgia
CAN’T MAKE IT IN PERSON?
ONLINE BIDDING
AVAILABLE
FOR THE COMPLETE TERMS & CONDITIONS OF THE FEATURED AUCTION
Please visit our website www.BIDITUP.com
Thinking of having an auction or need an appraisal?
Call us at 818.508.7034