Auction - National Machinery Exchange

Steel Tubing Manufacturing Equipment
Former
Assets of:
Al Tech Facility
201 Spring Street Road
Watervliet, New York (Albany Area)
Featuring: Draw Benches – Up To 100,000# • Fenn #7F Swager • 6" Tube Straightener • 6" Stretch Straightener
• Over (10) Billet Saws • 600-Ton Piercing Press • 2001 Water Treatment System • Toolroom
• Overhead Bridge Cranes, Up to 20-Ton • Rolling Stock • Stainless Steel Tanks • Plus Much More!
100,000 Aetna Standard Draw Bench
Sutton Mdl. 20SD “Syncro Drive” Tube Straightener
600-Ton Lake Erie Piercing
Press with Induction Heaters
online
AUCTION
2001
2001 JWI Filter Press
This is an Online Auction – Please Register at www.kosterindustries.com and to view photos and further equipment information.
Online Bidding starts: Thursday, February 7th, 2008 at 10:00 a.m. EST
Online Bidding Ends: Friday, February 8th, 2008 at 1:00 p.m. EST
4-Day Onsite Inspection Period: Monday, February 4th thru Thursday, February 7th, 2008,
from 8:00 a.m. to 4:00 p.m. each day and by appointment prior to sale
Presented By:
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
Technical Consultants:
6" Sutton 375-Ton Stretch Straightener
60,000W Blaw
Knox Push
Pointer Draw
Bench
HYDRAULIC PIERCING PRESS
Ohler Mdl. K-1000, 44" diameter
blade, hydraulic feed, vertical type,
s/n: 7701
*600-Ton Lake Erie, 44" stroke,
64" between housing, 22" ram
diameter, downacting, Ajax
magnethermic 600 kw induction
heater units, hydraulics, s/n: 3338
Ohler Mdl. KA-1000, 44" diameter
blade, hydraulic feed, vertical type,
s/n: 6107
View of Rebuilt Ohler-Remscheid Billet Saws
6" STRETCH STRAIGHTENER
DRAW BENCHES
*Sutton Engineering 375-Ton,
6" capacity, ½" square minimum
capacity, 40' maximum length,
5' minimum, s/n: 1030
*100,000# Aetna Standard
Draw Bench, 5" maximum OD,
½" minimum OD, 70' maximum
length, 200 HP, s/n: 31370
6" TUBE STRAIGHTENER
*60,000# Blaw-Knox, push pointer
draw bench, 5¼" maximum OD,
1½" minimum OD, 45' maximum
length, s/n: 47660
*Sutton Engineering Mdl. 20SD,
Synchro Drive, 1" minimum,
rated 5" dia. x 1" wall, [5] rolls,
motorized screw downs, entrance
table, 40 HP main drive, automatic
feed tables, s/n: 1272
Billet Saws
Ohler-Remscheid Mdl. 630, 24"
diameter blade, s/n: 8485 (1977)
GUN DRILLS
1" Beyer “Pressure Bore” Gun
Drill, dual spindle, 14"-24" length,
30 HP spindles, 50 HP pump
motors, s/n: 11569
Ohler-Remscheid, 24" diameter
blade
Wagner Reutlinger Mdl.
WKAN630, 26" diameter blade,
side cutting, infeed conveyor,
hydraulic clamping, chip conveyor
2-1/16" Star Cut Horizontal Gun
Drill, 14"-24" length, hydraulic
feed, 40 HP motor
SWAGER
24" Radiac Abrasive Cut-off, 30
HP, pneumatic, roller infeed, dust
collector, s/n: C7135
This is an Online Auction
*Fenn #7F, v-belt drive, 30 HP,
s/n: 158
Assorted Radiac Abrasive CutOffs and Feeds
Presented By:
Technical Consultants:
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
Please Register at
www.kosterindustries.com
and to view photos and further
equipment information.
2
View of Water Treatment System
(New 2001 – Over $400,000 New!)
WATER TREATMENT SYSTEM
*Consisting of JWI Mdl. 800G3220-10SYLW 200 Cubic Filter
Press, 800mm, 40,000 GPD
flow capacity of entire system,
[2] 20,000-gallon equalization
tanks, davco clarifier, zimpro
35-ton lime silo with bin activator,
slurry pumps, etc. [installed new
2001] – Over $400,000 New! –
Building is also available
FURNACES
Selas 4' x 21' x 6' Gas Fired
Furnace, 30' long, roller chain,
9-chamber, quench tunnel,
1000-2400 degrees Fahrenheit,
blowers, etc.
13' x 4' x 5' High Tube End
Heating Furnace, hauck burners,
water cooling, front mounted
transfer table
24" x 90" LeBlond Engine Lathe,
with taper attachment, coolant,
s/n: 5HD-228
20" x 54" Monarch Type
2013X54 Mdl. 62 Engine Lathe,
s/n: 43445-R (1961)
[2] 4' x 6' x 4½" High Heat Treat
Furnaces, digital temperature
readouts
12½" x 20" Monarch “EE” Lathe,
2500 RPM spindle
PIPE CONVEYOR SYSTEM
5' x 12" American “Hole Wizard”
Radial Arm Drill, with right angle
base, s/n: N/A
Hewitt-Robbins/Alvey-Ferguson,
5' x 40' long section, 5' wide
x 170' long section, 12-cross
discharge sections, pneumatic lift
sections, plastic protective pads
10" x 72" Landis Cylindrical
Grinder, with 3" wide x 30"
diameter grinding wheel, 10 HP,
coolant, s/n: 23463
TOOLROOM MACHINERY
Olson Car Bottom Annealing
Furnace, gas fired, 7' x 40' x 10'
high, track mounted, [13] burners
each side, Leeds & Northrup
digital temperature controllers,
chart recorders
24" x 90" LeBlond “Regal” Mdl.
24 Engine Lathe, with 5" hole
thru spindle, tracing attachment,
21" rear mounted 4-jaw chuck,
coolant, s/n: 2H-785
10" x 24" Cincinnati Cylindrical
Grinder, s/n: 402BKF-5
Bridgeport 1HP Vertical Mill,
with 9" x 36" table, power feed,
s/n: J84870
Presented By:
AUCTIONEERS • LIQUIDATORS • APPRAISERS
8" x 18" Brown & Sharpe Mdl.
818 “Micromaster” Surface
Grinder, s/n: 523-8186-7880
#2 Cincinnati Tool & Cutter
Grinder, s/n: 1D2T5A-385
Carbide 10" Double End Grinder
Ex-Cello Mdl. 48-5 10" Double
End Tool Grinder
24" Grob Mdl. NS24 Vertical
Bandsaw
DoAll Horizontal Bandsaw
Cincinnati 20" Shaper
Oster Mdl. 792A Pipe Threader
Wilson “Tukon” Hardness Tester
Rockwell Mdl. 3JR Hardness
Tester
Technical Consultants:
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
http://www.kosterindustries.com • e-mail: [email protected]
10" x 18" FLB Mdl. SW4VA1
Automatic Surface Grinder
3
Ohler-Remscheid Tube Cut-Off Saw with Feed System
Selas Gas Fired Furnace
Olson Car Bottom Furnace
1 OF 2
24" x 90" Leblond “Regal” Mdl. 24 Engine Lathe with
5" Spindle Bore
#4A Warner & Swasey Saddle-Type Turret Lathes
20" x 54" Monarch Mdl. 62 Engine Lathe
MATERIAL HANDLING
SYSTEMS & OVERHEAD
BRIDGE CRANE
Abell-Howe “Stak-Master”
Stacking System, 5-ton, 70' span
crane, [4] sections of 112' long x
6' wide x 24' high racking, 116'
long x 3' wide x 24' racking with
trays
[8] P&H Overhead Bridge
Cranes, up to 20-ton capacity x
100' spans, double girders
Assorted Jib Cranes & Hoists,
12' & 18' reach, up to 20-Ton
100-Ton Elmes C-Frame Hydraulic
Straightening Press
Satec Mdl. M11-120HVL
Tensile Tester
SADDLE-TYPE TURRET LATHES
TEST EQUIPMENT
[2] #4A Square Head Warner &
Swasey’s, 9½" hole thru spindle
(approx.) s/ns: 2546468; 2148706
Tac Technical Instrument Corp
“Tac-Tic” Ultrasonic Tube & Bar
Test System, probe followers,
tube benches, sonic instrument
ultrasonic flow tester, water
conditioner, chart recorders, etc.
HYDRAULIC
STRAIGHTENING PRESS
Consolidated #73, flywheel type,
mechanical, entry table
100-Ton Elmes C-Frame
Hydraulic, 6' table
(2) Digital Platform Scales
60,000# Riehle Hydraulic Tensile
Tester
Custom Built Hydro Test Station,
50' long, track mounted, winch
system, roll-off stand, control
panel
Pipe Inspection Station, 80' long
All-Lift 9-Ton x 30' Long
Spreader Beam
Assorted Crane Parts, cable,
buss bar and electrified rail
Please Register at www.kosterindustries.com and
to view photos and further equipment information.
Satec Type UTM, Mdl. M11120HVL Tensile Tester
Presented By:
Technical Consultants:
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
(2) Carthage 4-Ton x 40' Long
Spreader Beams
This is an Online Auction –
30,000# Wilson Hydraulic Tensile
Tester
http://www.kosterindustries.com • e-mail: [email protected]
(2) 20,000 Transweigh Mdl. 6260
Crane Scales
Tac Technical Instrument Corp. Ultrasonic Tube & Bar
Test System
4
View of Abell-Howe “Stak-Master” Stacking System
1" Beyer Dual Spindle Automatic Gun Drill
View of BAC Cooling Towers
This is an Online Auction
1977
Please Register at
www.kosterindustries.com
and to view photos and
further equipment information.
16,000# Caterpillar Mdl. V160B Forklift
MISCELLANEOUS
PLANT EQUIPMENT
1992 Cleaver Brooks Boiler
Mdl. C700-250, s/n: L-91170
2001 Berendsen Fluid Power
1,000 Gallon Capacity Hydraulic
Power System, [2] 100 HP motors
[8] Heavy Duty Steel Transfer
Cars, 10' x 6' x 2' high & 20' x 3'
x 3' high, motorized, track running
Caterpillar Mdl. 966C Articulating Front End Loader
ROLLING EQUIPMENT
Miscellaneous Related Plant
Items Include: Stainless Steel
Walkway Platform, Stainless Steel
Piping, Large Quantity of Saw
Blades, Bearings, O-Ring Seals,
Sprockets, Bench Vises, Heavy
Duty Benches, Scrap Hoppers,
Large Quantity of Pipe Racks,
Stainless Steel Dock Plate,
Bridgeport Rotary Table, Dividing
Head, Heavy Duty Storage
Cabinets, Etc.
30,000# Caterpillar Mdl. V300B
Forklift Truck, s/n: 72Y00777
16,000# Caterpillar Mdl. V160B
Forklift Truck, s/n: 68Y00338
6000# Caterpillar Mdl. GP30K
Propane Forklift,
s/n: AJ13E30001
Caterpillar Mdl. 966C Front End
Loader, articulating, [2] buckets,
s/n: 76J7815
[3] BAC Cooling Towers, Mdl.
13400 & Mdl. 15282-R
ASSORTED TANKS &
PICKLING LINE EQUIPMENT
[2] 50' Long Stainless Steel
Tanks, 3½' wide x 5½' deep
Assorted Carbon Steel Tanks,
up to 50' long
Assorted Acid Tanks & [3]
Milltronics Controllers
Vertical Storage Tanks
Assorted Fiberglass &
Polyurethane Tanks
Dust Collectors Throughout
Facility
Online Bidding starts: Thursday, February 7th, 2008 at 10:00 a.m. EST
Online Bidding Ends: Friday, February 8th, 2008 at 1:00 p.m. EST
4-Day Onsite Inspection Period: Monday, February 4th thru Thursday, February 7th, 2008,
from 8:00 a.m. to 4:00 p.m. each day and by appointment prior to sale
Presented By:
Technical Consultants:
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
5
Steel Tubing Manufacturing Equipment
Former
Assets of:
Al Tech Facility
201 Spring Street Road
Watervliet, New York (Albany Area)
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 13%
Buyer’s Premium. A minimum deposit of 25% on all lots purchased is required at the
time of sale in cash, certified or cashier’s check. Company or personal checks will
be accepted only if accompanied by a letter from the payor’s bank guaranteeing
unqualified payment to Koster Industries Inc. All checks must be made payable to
the order of Koster Industries Inc. Direct bank wire transfers to the account of Koster
Industries Inc. on balances due will be accepted with prior arrangement. No lot may
be removed until complete settlement is made. *Denotes subject to prior sale.
IMPORTANT NOTICE: Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as
to the accuracy of the information herein contained. It is for this reason that buyers
should avail themselves of the opportunity to make inspection prior to the sale.
P & H 15-Ton Overhead Bridge Crane
AUCTIONEERS • LIQUIDATORS • APPRAISERS
555 Broadhollow Road, Melville, New York 11747
(631) 454-1766 • Fax (631) 454-1779
Presorted
First-Class Mail
U.S. Postage
PAID
Minneapolis, MN
Permit #3723
AXP/8010228
online
AUCTION
Steel Tubing Manufacturing Equipment
Former
Assets of:
Al Tech Facility
201 Spring Street Road
Watervliet, New York (Albany Area)
Featuring: Draw Benches – Up To 100,000# • Fenn #7F Swager • 6" Tube Straightener • 6" Stretch Straightener • Over (10) Billet Saws • 600-Ton Piercing
Press • 2001 Water Treatment System • Toolroom • Overhead Bridge Cranes, Up to 20-Ton • Rolling Stock • Stainless Steel Tanks • Plus Much More!
Directions
New York State Thruway (I-87 North) to Exit 23 (I-787 North/Toward Troy).
Take Exit 7W to Route 378W toward Watervliet and go 6/10 of a mile and
then take Route 32 Exit toward Watervliet/Menands. Turn right on Route 32/
Broadway. Go 6/10 of a mile to first street and make a left. Go about 8/10
of a mile. Plant will be in front of you.
Hotels
Fenn #7F Swager
Holiday Inn Express, Latham, NY.................................................. 800-345-8082
Holiday Inn Express, Albany, NY................................................... 877-531-5084
Crown Plaza, Albany, NY............................................................... 877-898-1721
Best Western, Albany, NY.............................................................. 877-574-2464
(1 of 8) Assorted P & H Bridge Cranes, Up to 20-Ton
Capacity x 100' Span
This is an Online Auction – Please Register at www.kosterindustries.com and to view photos and further equipment information.
Online Bidding starts: Thursday, February 7th, 2008 at 10:00 a.m. EST
Online Bidding Ends: Friday, February 8th, 2008 at 1:00 p.m. EST
4-Day Onsite Inspection Period: Monday, February 4th thru Thursday, February 7th, 2008,
from 8:00 a.m. to 4:00 p.m. each day and by appointment prior to sale