A Unique Opportunity to Purchase Assets which have

A Unique Opportunity to Purchase Assets which
have Become Available Due to the Merger of
MBCI & NCI Metal Component Manufacturers
MBCI & NCI
10:30 A.M., THURSDAY, JUNE 20
14031 W. HARDY, HOUSTON, TX
Inspection: Wednesday, June 19, 9 a.m.-4 p.m. & Morning of Sale
STATE-OF-THE-ART PRE FAB METAL BUILDING/
STUD & TRACK MANUFACTURER
3,000,000 VALUATION!
$
BIDITUP
An Industrial Assets Company
Tel: (818) 508-7034
Fax: (818) 508-3025
www.biditup.net
email: [email protected]
5
9
9
1
BRADBURY 12-Stand Side-By-Side C&Z Purlin Mill w/12’x250-T CINCINNATI Pre-Punch & Cutoff Press Brake
BRADBURY Feeder/Straightener
10,000 Lb. BRADBURY Hyd./
Motorized Uncoiler
Changeout for Additional “C” Tooling
“1995” BRADBURY “COMPLETE” SIDE-BY-SIDE
C&Z PURLIN LINE
Mfg. 4-12”x10 Ga C&Z’s
1995 48”x10,000 Lb. Uncoiler, Mdl. 460 w/Hyd. Coil Car, Overarm
Holddown, Motorized w/Hyd. Exp., V-Speed • 1995 BRADBURY
Straightener Feeder, 5-Roll Straightened w/Entry Guide, s/n 28689 •
CINCINNATI Brake, 250/400 Ton x 12’, Series 13, Web Flange &
Cutoff Dies, 2-4-2 Pattern • 1994 BRADBURY C&Z Rollformer, Mdl.
DW, 24-Stand, 3 1/2” Arbor, 24” Rollspace, Side-By-Side w/(3)
Interchangeable Stands for C’s w/Controls, s/n 28265 • Exit Conveyor.
Replacement Cost: $600,000.
2
BRADBURY Straightener/Feeder/Rouselle
Press/HTC 200-T x 12’ Hyd. Punch & Cut-Off
BRADBURY 10,000 Lb. w/Coil Car
4
199
BRADBURY Rafted 12-Stand
Double-Sided C&Z Purlin Mill
75-T OBI Adjustable Gap Press
Exit Conveyor
“1994” BRADBURY “COMPLETE” SIDE-BY-SIDE C&Z PURLIN LINE
Mfg. 4-12”x10 Ga C&Z’s
BRADBURY Uncoiler, Mdl. 420SR, 42”x10,000 Lb.
Motorized, V-Speed w/Hyd. Coil Car, Overarm
Holding Roll, s/n 14792 • CLEVELAND OBI Air Clutch
Pre-Punch, 75-T, 4” Stroke w/Adj, Gaugeable Die •
BRADBURY 5-Roll Leveler, Mdl. RS 46-5-24
w/Guide System, s/n 14794 • Ink Jet Capability •
ROUSELLE OBI Press #3 w/Pre-Punch Die • HTC
Mdl. 250-14-HM, 14’x250-T Hyd. Press w/E200162,
s/n 3852574 • Flange Tooling for Web & Cutoff, 2-42 Pattern • BRADBURY Double Sided Rollformer,
Mdl. DW 425, 24” Rollspace 24” Stand, 3 1/2” Arbor,
s/n 14798 • 30’ Runout Conveyor • Control Panel.
Replacement Cost: $600,000.
3
6
9
9
1
BRADBURY Z Line Rollformer Side-By-Side C&Z Purlin Line
“1996” BRADBURY Z LINE ROLLFORMER
SIDE-BY-SIDE C&Z PURLIN LINE
Mfg. 4-12”x10 Ga C&Z’s
Mdl. DW423RS Side-By-Side C&Z Purlin Line, Mfg. 4-12” x
10 Ga. C&Z’s • 12-Stand Each Side for a Total of (24)
Stands, 3 1/2” Arbor, 24” Rollspace w/Controls, s/n 29807.
“1999” BRADBURY
16-STAND ROLLFORMER
Tooled for “R” & “5V”
Panels
1999 BRADBURY 16-Stand Rollformer,
48” Rollspace x 3 1/2”, Chain Driven,
500HP w/MP 300 Series Controls,
Tooling for “R” & “5V” Panels,
s/n 34694-34697.
THURSDAY, JUNE 20
10:30 A.M.,
9
199
14031 W. Hardy, Houston, TX
BRADBURY 16-Stand Rollformer
4
SL-16 Royal Lock Panel
ARDCOR 14-STAND X 2 1/2 ARBOR X 33” ROLLSPACE
Tooled for SL-16 “ Royal Lock Panel”
14-Stand ARDCOR Geared Head SL-16 “ROYAL LOCK PANEL” Rollformer,
Mdl. F-15; 14-Stand; 33” Rollspace x 2 1/2”; 5” Vert. Adjustment; 16” Centers;
40HP; Sliding Base.
“1994” BRADBURY
RETRO EVE STRUT
1994 BRADBURY, 8”-13” Double
& Single Slope, 3”-5” Leg, (4)
Forming Heads, 6” Side Heads,
20HP, s/n 26880.
CORRUGATED
ROLLFORMER
10-Stand x 36”x2 1/2” Shaft,
11 1/2” Centers.
4
199
BRADBURY Retro Eve Strut
5
THINKING OF HAVING
AN AUCTION?
NEED AN APPRAISAL?
KNOW OF A PLANT
CLOSURE?
CALL:
(818) 508-7034
EXT. 12
ASC 14-Stand Double-High Rollformer
DURANT Leveler
Dropstack & Conveyor
48 x 20,000 Lb. Uncoiler w/Coil Car
COMPLETE 2-HIGH ROLLFORMER
AMS Digital Controller
ASC Precut System Consisting of: AMERICAN STEEL Line Decoiler, Mdl. 1000,
20,000 Lb. X 48” Cap., Coil Car, s/n 5572-12/76 • DURANT Leveler, Mdl.
FHDA/48, 48”, s/n 49310298 • WYSONG Precut Shear, Mdl. HS-1452, 16 Ga. Cap.,
s/n P50-114 • ASC 14-Stand Rollformer, Mdl. U4-2884, Double High 44”x 3 1/2”
Shaft, s/n 535 • Conveyor • Stacker • AMS Controls.
6
D
FTE
A
R DS
TAN
37
S
20-Stand Rafted Rollformer w/(37) Rafted Stands
for (3) Profiles w/Cutoff Press & Conveyor
COMPLETE OMEGA
48” DECK RAFTED
PANEL LINE
Tooled for CFS, CFH, CFU
36” Concrete Deck & “A” Panel Line”
20,000 Lb. CONE Hyd. Uncoiler x 48” w/
Coil Car, V-Speed, Motorized • OMEGA
20-Stand Rafted Rollformer “W” Series w/37
Stands/Rafts, 50” Wide, 150HP, V-Speed
• Air Clutch Cutoff, 30’ Runout Conveyor.
Section Properties
Dock
Type Gage
20,000 Lb. Uncoiler
7
Weight (PSF)
Uncoated
Galvanized
CFS 28
CFM 26
.77
.94
.86
1.13
26
24
CFH
22
20
.95
1.25
1.53
1.85
1.14
1.45
1.73
2.05
IN4/Ft IN3/Ft IN3/FT
1
SP
SN
.012 .037 .039
.031 .063 .068
.062
.082
.099
.120
.080
.121
.142
.171
.080
.121
.142
.171
OMEGA “R” & “5V” Panel Line
OMEGA “R” & “5V” PANEL LINE
48”x 20,000 Lb. Uncoiler w/Coil Cart Upender, Hyd. Expansion,
V-Speed • OMEGA Rollformer, 48”, 16-Stand, (14) Additional Stands
of Rafts, 3 1/2” Dia. x 48”, 50HP w/Universal Drive, “R” Panel
Tooling, “5V” Tooling • OMEGA Air Clutch Cutoff Press •
PROGRESSIVE 12’ Stacker • 20-Stand Rafted Rollformer w/37
Rafted Stands for 3-Profiles w/Cutoff Press & Conveyor.
“A” PANEL 27”
HIGH RIB
10-Stand Lockformer, 36”x2” Dia.
Shaft, 12” Horiz. Centers w/
RABCO Pier, Adj. Flat Notcher.
THINKING OF HAVING
AN AUCTION?
NEED AN APPRAISAL?
KNOW OF A PLANT
CLOSURE?
CALL:
(818) 508-7034
EXT. 12
“A” Panel 27” High Rib
8
MP 300 Controls
12-Stand x 2” Shaft BRADBURY
Rollformer w/All Vent Tooling
BRADBURY COMPLETE “PEAK VENT”
ROLLFORMER & LINER PANEL
BRADBURY, Mdl. MC-1 1/2-30-10, Liner Panel, 30” R.X. x 2”
Shaft, 14” Horiz. Centers, 4” Vert., V-Speed, s/n 10920.
4-Post Cutoff Press w/Vent Punch Tools
STANDING SEAM
ROOF LINE
METALFORM Rollformer, 14- Stand, 24”
Rollspace, 14” Horiz. Centers, 4” Vert., 2”
Shaft, 30HP V.S. Drive.
THURSDAY, JUNE 20
10:30 A.M.,
14031 W. Hardy, Houston, TX
Standing Seam Roof Line
9
31 Stands of ASC Rafts 30”x 2-1/2” Shafts & Tooling For Standing Seam Panel
STANDING SEAM
ROLLFORM
TOOLING & RAFTS
Standing Seam Rafts,
Stand of Rafts, 30”x2
Shaft, 18” B.C.
199
(31)
1/2”
0
Over $300,000 Replacement Cost!
1990 60” ENGEL Duplex Panel Former, Mdl. DH4615-5-TA
ENGEL PANEL FORMING LINE
1990 60" ENGEL Dual Head Duplex Panel Former,
Mdl. DH4618-5-TA, 18-Pass, w/(2) Turnaround Heads
for Multiple Panel Forming, 4" Vert. Centers, 6" Horiz.
Centers, s/n DH4618-5-TA • 10'x60" Sheet Destacker,
10
Mdl. SDS510 s/n 12990-90 • Notching Unit, Mdl.
PNU150, s/n 12990-90 Discharge Conveyor.
To Be Sold Via Photo. Located in Solon, OH
STRILLICH BLANKING LINE
STRILLICH Coil Lift: 30” Vert., Max Width
75”, Max OD 72” • Payoff Reel: Max Width
75”, Weight Cap. 50,000 Lbs., Max OD
84”, Floor To Mandrel Center Line 66” •
Peeler Breaker: Max Width 75” • Thread
System: Max Thickness 0.140”, Max Width
75”, Min Width 12” • Motor Grip Feed: Max
Width 75”, Min. Width 9 1/2” for 6” Dual
Grip Feed, Min. Width 12” for 9” Dual Grip
Feed, 0.005” Precision • Shear: Max Width
75”, Max Shears Per Min. Continuous 100 •
Strip Stacker: Max Width 75”, Min. Material
Width 3”, Max Length 144”, Min. Length
10”, Max Stack Clearance 20” • Slitter:
Max Thickness 0.140”, Min. Standard
Thickness 0.024, Max Material Width 75”,
Min. Slit Width 3”, Knife Diameter x
Width-10x3/4, Slit Width Accuracy 0.005,
Line Speed 200 • Leveler: BRADBURY,
(17) Work Rolls 1.75” Dia., 66” Face, Backup
Flights 7 Top & Bottom, Intermediate Rolls
5-High, 200HP Main Drive.
To Be Sold Via Photo.
Located in Jackson, MS
STRILLICH Blanking Line
YEAR 2000 COMPLETE COMBINATION 600 FPM STUD & TRACK LINE
1 5/8”-6” Legs, 1”-1 1/4” Length 8’-18’, Gauges from 18-25 w/Automatic Nester & Bundler, Stud
& Track Integrated Packaging System • BRADBURY 400 Series, 70KPSI, .017”-.036” • 10” Max
Strip Width • 10,000 Lb. Coil Weight • 72” Entry Coil OD • Mandrel Expansion 24 1/2” Max, 18”
Min. • Rollformer Variable Speed to 400FPM • Left to Right Line Flow • Pre-Punch, Post-Cut Mode
of Operation • Part Length 3’ Min, 30’ Max • Length Tolerance: 1/16 @120” @ 400 FPM, 1/32 At
Reduced Speed • Hole Location Tolerance: 1/16 @ 400 FPM @24” Centers • Forming Station
Telescoping Tooling: (10) Stations, (8) Prime, (2) Sideroll Stud & Track • Auto Nester & Bundler:
AUTOMATIC SERVICES LTD. Integrated w/BRADBURY Line, 600 FPM, s/n 35825.
To Be Sold Via Photo. Located in Memphis, TN • Replacement Cost $600,000.00
BRADBURY 10,000 Lb. Double End Uncoiler
BRADBURY 10 Station Roll Former, Pre Punch & Postcut
00
20
Forming Stands
Auto Nester & Bundler
AMS & BRADBURY Controller
11
ALCOS Double End Uncoiler GK16
COMPLETE ECONO TRACK LINE
From 1 5/8”-6”x.062 GAGE
YODER, Mdl. 2.00Y, 13” Roll Space • 2” Shaft Dia. • 12x
1/4 Keyway • Equal Gear Ratio • 4-3/8-8” Vertical Centers
• 15 Horiz. Centers • 7” Distance from Machine Bed to
Top of Bottom Spindle - Mill Bed Adjustment Motorized •
(11) Passes (Can Make 13) • 200 FPM Normal Line Speed
• 0.093 Max Mild Steel • ALCOS 100-T 4-Post
Mechanical Press • Closed Loop Die Accelerator •
35’Lx10” Runoff Conveyor • POLYCHEM PC100 Banding
Machine • ALCOS 6,000LB Double 4-Leaf Uncoiler •
23”x36”x50 1/2” Operator Console w/AMS Controls •
75HP Mill Motor • 15HP Press Motor • Vector Drive Die
Accelerator Motor H.P. • Water Soluble Coolant System.
YODER M2” x 11 Stand 75 HP
To Be Sold Via Photo.
Located in Memphis, TN
PROMA 4 Dust 100 Tons, Flying Cut Off
AMS Digital Controller
COMPLETE STRUCTURAL STUD
LINE & ANGLE LINE
From 1 5/8” Leg, 2 1/2” Thru 10”
Structural Stud Tooling
for 3” Angles, .093” Gage
6
199
Rebuilt 1996 ALCOS Closed System • 18”
Rollspace • 2” Shaft Dia. • 12x1/4 Keyway •
Equal Gear Ratio • 4 3/8-8” Vert. Centers •
(15) Horiz. Centers • 7” Distance from
Machine Bed to Top of Bottom Spindle –
Mill Bed Adjustment Motorized • (11)
Passes (Can Make 13) • 200 FPM Normal
Line Speed • 0.093 Max Mild Steel •
ALCOS 100-T 4-Post Mechanical Press •
35’x10” Run Off Conveyor • Closed Loop
Die Accelerator • POLYCHEM PC100
Banding Machine • ALCOS 6,000 Lb.
Double 4-Leaf Uncoiler • 23”x36”x50 1/2”
Operator Console w/AMS Controls • 75HP
Mill Motor • 15HP Press Motor • Vector
Drive Die Accelerator Motor H.P. • Water
Soluble Coolant System.
ALCOS 11-Pass Rollformer
AMS Controls
THURSDAY, JUNE 20
10:30 A.M.,
To Be Sold Via Photo.
Located in Columbia, SC
ALCOS 6,000 Lb. Double End Uncoiler
12
14031 W. Hardy, Houston, TX
COMPLETE TRACK, ANGLE & CHANNEL LINE
Track From 1 5/8”-6”, Angle From 3/4”, 1 1/2” & 2” x .062 Gage, Channel From 3/4”, 1 1/2” & 2”
B&K, 10” Roll Space • 1/5” Shaft Dia •
1/4x1/8 Keyway • Equal Gear ratio. 4 1/4-7”
Vert. Centers • (14) Horiz. Centers • 5 1/8”
Distance from Machine Bed to Top of
Bottom Spindle • (9) Passes (Can Make
12) • Normal Line Speed 100 FPM • .062
Max. Mild Steel • ARDCOR 10-T Mdl. KO10-3-10 Press • 21Lx10”W Open Loop Die
Accelerator w/Pushoff • POLYCHEM
PC100 Banding Machine • 6,000 Lb.
Double 4-Leaf Uncoiler w/Brake •
23”x36”x50 1/2” Operator Console
w/AMS Control • 60HP Mill Motor • 5HP
Press Motor • Spring Return Die
Accelerator Motor H.P. • Water Soluble
Coolant System.
Complete Track, Angle & Channel Line
To Be Sold Via Photo.
Located in Columbia, SC
COMPLETE CURTAIN WALL LINE • Mfg. 1 5/8”-6”x.093 Gage Curtain Wall
ARDCOR, 18” Roll Space, 2” Shaft Dia., 3/8x3/16 Keyway, Equal Gear Ratio, 4 3/4-8” Vert. Centers,
(16) Horiz. Centers, 6-1/2” Distance from Machine Bed to Top of Bottom Spindle – Adjustable Mill
base, (11) Passes (Can Make 13), Normal Line Speed 100 FPM, .093 Max Mild Steel, PROMA 60-T
4-Post Press, 21’Lx10’W Open Loop Die Accelerator w/Push Off, POLYCHEM PC100 Banding
Machine, 6,000 Lb. Double 4-Leaf Uncoiler w/Brake, 23”x36”x50 1/2” Operator Console
w/AMS Control, 60HP Mill Motor, 20HP Press
To Be Sold Via Photo.
Motor, 3HP Die Accelerator Motor, Water
Located in Columbia, SC
Soluble Coolant System.
Complete Curtain Wall Line
13
COMPLETE FURRING CHANNEL LINE
7/8” x .062 Gauge
ARDCOR Mdl. 1F, 10” Roll Space, 1/5” Shaft Dia.,
1/4x1/8 Keyway, Equal Gear Ratio, 4 1/4-7” Vert.
Centers, (14) Horiz. Centers, 5 3/8” Distance from
Machine Bed to Top of Bottom Spindle, (11)
Passes (Can Make 12), Normal Line Speed 100
FPM, .062 Max Mild Steel, Mechanical 10-T
Adjustable Base Press, 21’Lx10”W Open Loop Die
Accelerator, POLYCHEM PC100 Banding
Machine, 6,000 Lb. Single 4-Leaf Uncoiler
w/Brake, 23”X36”x50 1/2” Operator Console
w/AMS Control, 60HP Mill Motor, 5HP Press
Motor, Spring Return Die Accelerator Motor H.P.,
Water Soluble Coolant System.
Complete Furring Channel Line
To Be Sold Via Photo. Located in Columbia, SC
COMPLETE ECONO TRACK LINE
Tooling for 1 5/8”-6”x.062 Gage
B&K Mdl. 136, 12” Roll Space, 1/5” Shaft Dia.,
1/4x1/8 Keyway, Equal Gear Ratio, 4 5/8-7 7/8”
Vert. Centers, (14) Horiz. Centers, 5 3/4”
Distance from Machine Bed to Top of Bottom
Spindle, (10) Passes (Can Make 12), Normal
Line Speed 100FPM, 0.062 Max Mild Steel, 60Ton Mech. w/Adj. Base Press, 21’Lx10”W Open
Loop Die Accelerator w/Push Off Cyl.,
POLYCHEM
PC100
Banding
Machine,
LITTELL Double 4-Leaf Uncoiler w/Brake,
23”x36”x50 1/2” Operator Console w/AMS
Controls, 60HP Mill Motor, 20HP Press Motor,
3HP Dia Accelerator Motor, Water Soluble
Coolant System.
Complete Econo Track Line
To Be Sold Via Photo. Located in Columbia, SC
1999 BRADBURY HEAVY
DUTY RAFTED ROLLFORMER
1999 BRADBURY 10 Ga. Cap.,
16-Pass, 3 1/2” Arbors, 36” Rollspace,
150HP V-Speed Drive, 18” Between
Centers, w/Controls, s/n 34944.
9
199
BRADBURY R&M 2-HIGH
ROLL FORM LINE
BRADBURY R&M Panel Roll Form
Line, 48”x3 1/2” Arbors, Approx. 75HP.
THURSDAY, JUNE 20
10:30 A.M.,
14031 W. Hardy, Houston, TX
BRADBURY R&M 2-High Panel Roll Form Line
14
0’s
198
1980’s ROWE COMPLETE CUT-TO-LENGTH LINE
"ROWE" 25,000 Lb. X 72" X 10 Gauge Complete Cut To Length Line
Consisting Of:
• ROWE Uncoiler, Mdl. 25075-Dsv, Capacity 25,000 Lbs., 72" Width
X 60" O.D., Motorized, Hydraulic Expansion, Hyd. Coil Car, Loopco
3-Arm Motorized Turnstile, S/N 1114a7294a.
• ROWE 72" Edge Guide.
• ROWE Straightener Leveller, Mdl. V9-72, Capacity .030-.135,
Complete w/Entry Guide Rolls, Double Entry Pinch Rolls, Over (5)
Straight Rolls, S/N 27235.
• Power Edge Trimmer.
• 12' Hump Table, Motorized w/Air Adj.
• WYSONG Shear, Mdl. 772-115, 10 Gauge, 20 H.P. Motor, High
Speed, Air Clutch, S/N 15265.
• 16' Motorized Exit Conveyor.
• 16' Motorized Stacker & Side Exit Conveyor.
• Control Console, Speed 0-160 F.P.M., Digital Batch
• Control System BURR-BROWN, TM2700.
To Be Sold Via Photo. Located in Arkansas
Complete ROWE 25,000 Lb. Cut-to-Length Line
BRADBURY
CUT-TO-LENGTH LINE
BRADBURY 72”W x 12Ga Cut To
Length Line.
4-STAND
ROLLFORMING LINE
4-Stand Rollformer, 48”Rollspace, “Rigidizer”,
12” Between Center, 2” Vert. Adjustment,
Entry Guide & Electrics.
BRADBURY Cut-To-Length Line
DAHLSTROM
CUT-TO-LENGTH LINE
72”x14 GA
DAHLSTROM Uncoiler Mdl. 20#-1824/48L,
48”x20,000 Lb., 18”-24” OD, 72”x14 Ga. Ctl.,
Progressive, 5-Roll Straightener, 72” Shear,
72” Progressive Drop Stacker, s/n R540.
DOOR TRACK LINE TO
MANUFACTURE BASE
PLATE DOOR TRACK
METALFORM, 22-Stand, 18” Rollspace, 2” Arbor.
THINKING OF HAVING
AN AUCTION?
NEED AN APPRAISAL?
KNOW OF A PLANT
CLOSURE?
CALL:
(818) 508-7034
EXT. 12
4-Stand Rollforming Line
15
UNCOILERS
1990’s ASC, Mdl. 1000, 42”x10,000
Lb. Cap., Motorized, V-Speed, Hyd.
Expansion, s/n 5353.
0’s
9
9
1
1985 ASC, Mdl. 1000, 48”. x 10,000 Lb.
Cap., Hyd. Upender & Coil Car, Hyd.
Exp. Sliding Base, s/n 7634.
AMERICAN STEEL Line Uncoiler,
Mdl. 1000, 10,000 Lb. X 48”, Hyd.
Expansion, s/n 3458.
1996 AMERICAN STEEL Line Uncoiler,
Mdl. 1000 6,000 Lb. x 36”, Power Exp.,
V-Speed Motorized, s/n 9369.
AMERICAN STEEL Line Double End
Uncoiler, Mdl. 1000, 20,000 Lb. Each
End x 48”, Hyd. Expansion, Power
Rotation, V-Speed, s/n 6645.
COOPER WEYMOUTH, 10,000 Lb. x
36”, Motorized, s/n 1000036P-700.
ROWE, Mdl. 16040-DSL, 16,000 Lb. x
48”, Hyd. Expansion, s/n 25613.
LITTLE Double End, 1,000 Lb. Cap.
42” x 10,000 Lb. ASC Uncoiler, Mdl. 1000
5
198
STRAIGHTENERS/FEEDERS
HOURSBORURGH & SCOTT Flattener,
60”x10 Ga., 60HP, 5-Roll, s/n L-8802.
B&K Feeder Rolls, Mdl. FUR-08, 54” 4- Roll
Pinch, s/n 101.
YODER Slitting
w/Feed Rolls.
Head,
50”x5”,
15HP
BRADBURY Straightener, 9-Roll x 3 1/2”
Dia., 30” V-Speed.
ASC Feeder, 48” Motorized w/Entry Rolls.
CLINTON Leveler, Mdl. 5STRX48X18GA,
48”x18Ga., s/n1625-1-77.
DAHLSTROM Straightener, Mdl. 28-16,
28”x16 Ga. Cap., Entry Pinch Rolls, s/n 18-17.
48” x 10,000 Lb. ASC Uncoiler, Mdl. 1000
DURANT Roller Leveler, Mdl. FHDA40A,
48”x16 Ga., s/n 109310517.
1997 ROWE Roller Leveler, 44”x16 Ga.
BRADBURY Min. Leveler, 36” Cap.
1993 AMERICAN Roller Straightener, Mdl.
4-11, 30”W x 11 Ga., s/n 9347.
1996 AMERICAN Straightener, Mdl. 4-11,
30”W x 11 Ga., V-Speed w/Feed Grid
System, s/n 9345.
1994 AMERICAN Roller Straightener, Mdl.
4-11, 24”x11Ga., V-Speed, s/n 9493.
COOPER WEYMOUTH Straightener, 24”
x 16 Ga., 9-Roll, V-Speed.
NIAGARA Roller Straightener, Mdl. 275-720, 20”x14 Ga., s/n F1342.
BRADBURY Straightener,
Width, V-Speed.
5-Roll,
18”
48” x 20,000 Lb. AMERICAN STEEL Line Double End Uncoiler
16
EMBOSSING ROLL
MEMCO Stucco Embossing Roll, Mdl. 20, 36”x7
1/2HP, s/n 77-80.
PANEL TRIM SHEARS
1996 PEXTO Trim Shear, “R” Panel, 4’x16
Ga., s/n 4245.
ANDO Peak Shear Bender w/”R” Panel Tooling.
SWENSON Sheet Sheer w/”A” Panel Blade.
“R” Panel WYSONG Profile Shear, 4’x46 Ga.
DIACRO Mdl. 48, s/n 2800879142.
AIR & CUTOFF PRESSES
(2) 5-T Air Presses, 12”x12” Bed.
60-T, YODER 4-Post 24”x30” Bed.
20-T BRADBURY 4-Post, w/Gage Die.
25-T, AIR RAM Press, 18”x24” Bed.
50-T, AIR RAM Press 24”x26” Bed.
60-T, AIR RAM Press 24”x60” Bed w/”R”
Panel Dies.
100-T AIR RAM Press, 66x36” Bed.
48”x60-T AIR RAM Cutoff w/Flying Die.
YODER 4-Post Cutoff, Mdl. P-60, 40” Width,
Air Clutch, 7 1/2HP, s/n Y625-61.
48”x60-T BRADBURY 4-Post Cutoff, Air Clutch.
40-T Dual AIR RAM Press, Punch & Cutoff,
24”x39” Bed w/Flying Die.
View of AMERICAN & BRADBURY Straighteners
MEMCO Stucco Embossing Roll, Mdl. 20
60-T AIR RAM Press w/”R” Panel Dies
40-T & 60-T Double & Single AIR RAM Presses
THURSDAY, JUNE 20
10:30 A.M.,
14031 W. Hardy, Houston, TX
48”x60-T AIR RAM Cutoff Press
17
60-T ROUSELLE Press, Mdl. 6B-60 TON
BRADBURY Flying Pre-Cut System,Mdl. 48-24-4
55-T WYSONG OBI Press
40-T ROUSELLE #4
Mechanical Press
25’x400-T STEELWELD Hydraulic Press Brake, Mdl. KH12-16
PRESSES
ROUSELLE SS30-80 Press, HOA 389863, 30”x80” Bed, s/n 105580 • 75-T BLISS OBI
Press • 60-T MINSTER, Mdl. 60-30-42, 54”x42” Bed • 60-T ROUSELLE, Mdl. 6B-60
Ton, 18”x80” Bed, A/C • 55-T WYSONG OBI Press, 30”x18 1/2” Bed • 50-T MINSTER #5 OBI
Press, Air Clutch • 50-T FEDERAL OBI Press • 40-T MINSTER #4 Press, 15”x24” Bed,
32-120 SPM, A/C, s/n 4-16831 • 40-T ROUSELLE #4 Press, 16”x26” Bed, A/C • 40-T
ROUSELLE #4 Mechanical Press • 30-T WALSH OBI Press • 30-T FEDERAL OBI
Press • 22-T CLEARING OBI Press • 20-T ROUSELLE #2 OBI Press.
PUNCHES
BRADBURY Double Punch Heads w/Adj. Side Heads.
PRE-CUT SYSTEMS
BRADBURY Mdl. F/SHEAR SU, 30”x14” Ga., s/n 24505 • BRADBURY Flying
Pre-Cut, Mdl. 48-24-4, s/n 14810 • 24” FABCO, 5-Roll Stand/Hyd. Shear.
40-T MINSTER #4 Press
HYDRAULIC & MECHANICAL PRESS BRAKES
25’x400-T STEELWELD, Mdl. KH16, 12” Stroke, 6”
Shut Height, 16’4” Between Housings, s/n M09375.
To Be Sold Via Photo. Located in Chester, SC
26’x400-T CINCINNATI Mechanical, 2-Speed Gear
Drive. To Be Sold Via Photo. Located in
Atlanta, GA
12’x250-T Mid, 400-T Bottom CINCINNATI. To Be
Sold Via Photo. Located in Adel, GA
12’x250-T CINCINNATI. To Be Sold Via Photo.
Located in Atlanta, GA
14’x230-T 1995 HYDRA Power, Mdl. PS23012, 12’
B.H., 14’ OA, s/n G3026. To Be Sold Via Photo.
Located in Jackson, MS
1983 26’x225-T PACIFIC, Mdl. K225-26, 12 Ga.,
20’5” B.H., 12” Stroke, 5” Shut Height, s/n 9334.
18
14’x225-T PACIFIC Hyd., Mdl. K225-12, 24” Flange
Width, Press Brake Dies, s/n 5382.
12’x150-T VERSON Mechanical, Mdl. B710, 3”
Stroke, 12” S.H., Motorized Ram Adjustment,
Removable Bolt on Flange Rack, s/n 12888.
12’x150-T Rebuilt 2000, 24”x12’ HTC Hyd., Mdl. 25012, s/n 280T1920.
1984 12’x135-T PROMECAM CNC, Mdl. IT21036
w/DYNABOUND 3 CNC Control, s/n 0210360111.
12’x75-T CHICAGO, Mdl. 1012C w/Foot Pedal
Control, Motorized Ram Adjustment, s/n L14138.
10’x60-T D&K CHICAGO, Mdl. 8L10 w/Bolt on
Flange Bed, Motorized Ram Adjustment, s/n L4425.
8’x25-T WYSONG, w/HEM Die, Foot Pedal Control,
Motorized Ram Adjustment, s/n P-B38-113.
uilt
0
Reb
200
3
198
12’x250-T HTC Hydraulic Press Brake, Mdl. 250-12
26’x225-T PACIFIC Press Brake, Mdl. K225-26
5
199
12’x250-T Mid CINCINNATI Press Brake
14’x230-T HYDRA Power
Press Brake, Mdl. PS23012
14’x225-T PACIFIC Hydraulic Press Brake,
Mdl. K225-12
12’x250-T CINCINNATI Press Brake
10’x60-T D&K CHICAGO Press Brake,
Mdl. 8L10
8’x25-T WYSONG Mechanical
Press Brake
12’x150-T VERSON Mechanical Press
Brake, Mdl. B710
CNC
4
198
12’x75-T CHICAGO Press Brake, Mdl. 1012C
19
12’x135-T PROMECAM CNC Brake,
Mdl. IT21036
uilt
0
Reb
200
20’x3/4” PACIFIC Hydraulic Shear
12’x1/4” CINCINNATI Shear, Mdl. 114F
12’x16 Ga. NIAGARA Shear,Mdl. C112B
DOUBLE Z Duplex Lockformer
12’x15 Ga. NIAGARA Shear
View of Lockformers
HYDRAULIC & MECHANICAL SHEARS
20’x3/4” PACIFIC Hyd., Mdl. 500 R20, 26” Throat Depth, 14’
Stroke, 130 SPM, 5/8” Rake Max, 1/8” Rake Min., s/n S10325.
Rebuilt at Cost of $60,000 in 2000. To Be Sold Via
Photo. Located in Chester, SC.
12’x16 Ga. NIAGARA, Mdl. C112B, 24 MBG, s/n 55368.
12’x15 Ga. NIAGARA.
12’x12 Ga. NIAGARA, s/n 58782.
12’x14 Ga. PEXTO Mechanical, Mdl. 1144F, s/n 654294.
12’x1/4” CINCINNATI, Mdl. 1812, 36” F.O.P.B.G., Foot Pedal
Control, s/n 36984.
12’x18 Ga. WYSONG Air, Manual Back Gage, 2’Arms.
6’x1/4” STAMCO Mechanical, Mdl. 4135, s/n 2327H11A.
20” FABCO • 6-T A&R Hand • 2-Post Hyd • 6-T Shear • 5VCURY.
20
LOCKFORMERS
DOUBLE Z Duplex Lockformer, 48”x9-Stand.
24 Ga. Lockformer, s/n 5411.
20 Ga. Lockformer, s/n B2-2547.
SME Lockformer, Angle Line.
24 Ga. Lockformer, s/n SL-202.
24 Ga. Lockformer, s/n 5505.
SLITTERS
48” WILDER Steel Slitter.
HYDRAULIC PRESSES
100-T ENERPAC H Frame, 12HP.
200-T NATIONAL SWEDISH 4-Post, Mdl.
MS-200 w/Shear Die, s/n 20014.
199
6
MUBEA Hydraulic Punch, 77-T
100-T ENERPAC H-Frame Hydraulic Press
IRONWORKERS
METAL PUNCH, Mdl. MM61, s/n 2541-178.
BUFFALO, Mdl. O, 3x3x1/4”, s/n 54W-4595.
1996 MUBEA Hyd. Punch, 77-T, 1 1/4”-3/4” Cap.,
30” Throat, s/n KLH700-760.
HORIZONTAL BAND SAWS
JOHNSON, Mdl. J, 10” Cap., s/n 24712 •
KALAMAZOO, Mdl. H9AW.
BEADERS
(3) NIAGARA, Mdl. 180, 12-16 Ga. Cap.
HAND BRAKES
12’x18 Ga. CHICAGO, Mdl. 1218, s/n 116895.
CHICAGO, Mdl. 323-677M, Air Assisted Apron.
12’x18 Ga. CHICAGO, Mdl. SB1218, s/n 324805T.
10’x14 Ga. CHICAGO, Air Assisted Apron.
10’x14 Ga. CHICAGO, Mdl. 1014, s/n 71197.
CHICAGO Hand Brake
TURRET PRESSES
25-T WEIDEMAN, Mdl. RA41P, 36” Throat w/
Stylest, s/n 1151.
W&S WEIDEMATIC, Mdl. S-2550, s/n 525.
HYDRAULIC WEB & BEAM PUNCH
50-T Cap. Web Punch & Beam Punch.
PROFILE BENDERS
PEAK Bender • R&M • Ridge Cap.
PEAK Profile Bender
THURSDAY, JUNE 20
10:30 A.M.,
14031 W. Hardy,
Houston, TX
INSPECTION
WEDNESDAY, JUNE 19
9:00 a.m. to 4:00 p.m.
& Morning of Sale
21
50-T Web & Beam Punch
View of Forklifts
Hydraulic Coil Lifts & Hooks, 10,000-20,000 Lb.
PEDDINGHAUS Copping & Notching Machine
5-Tx27’ LANDEL Crane
View of DEMAG Cranes
5-T DESHAZO Crane
MATERIAL HANDLING
2,000 Lb. Electric Stand-Up Forklift, Power Flow w/Charger
• (2) 10,000 Lb. Hyd. Coil Lift • (2) 20,000 Coil Hook & Stand
• (2) 20,000 Lb. Caddy Lifts • (3) YARD DOG Tractors
FORKLIFTS
6,000 Lb. NISSAN 60 Diesel Forklift, Mdl. KEGHOZA30V,
Type D, s/n KEGH02-90034 • (2) 4,000 Lb. NISSAN 40
Diesel Forklifts, Mdl. KEHOZA20V, Type D, s/n KEH0290041.
View of Racks
COPPING MACHINE
TOOL ROOM EQUIPMENT
B&S Horiz. Mill, Universal 10x50, 1,200 RPM •
CINCINNATI Horiz. Mill, Mdl. 4, 16”x78” Table, 50-Tap,
s/n 2A4P1L110 • MATTESON Surface Grinder, 12”x48”
Electromagnetic Chuck,, s/n 11207 • CARLTON Radial
Drill, 6”x15” Cell • B&S Surface Grinder, Mdl. 2, 6”x18”
Chuck • ROCKFORD Surface Grinder, 6x10”.
22
PEDDINGHAUS
Copping
&
Notching,
Mdl.
ADC1000/4A w/MARK CENTURY Controls, s/n APC-109.
WELDERS
TAYLOR WINDFIELD Spot, 50KVA,
Controls • (10) MILLER Mdl. 500S.
ENTON
View of ATLAS COPCO Air Compressors
CHEVY Hunting/Deer Feeder Truck
View of Vehicles
CRANES
5-Tx27’ LANDEL, Pendent w/ROBBIN & MEYER Hoist.
5-Tx27’ LANDEL O.H., Pendent w/ROBBIN & MEYER Hoist.
(2) 5-Tx36’ OSBORNE Single Girder w/End Drive, 5-T
DETROIT Hoist, s/n 145940.
5-Tx18’ OSBORNE w/Pendent Controls, 5-T DETROIT Hoist.
DIRECTIONS FROM BUSH
INTERCONTINENTAL AIRPORT
Start going towards the AIRPORT EXIT on TERMINAL RD S. Continue
on JOHN F KENNEDY BLVD towards AIRPORT HOTEL. Turn Right on
BELTWAY 8/N BELT DR E/N SAM HOUSTON PKY E. Take the
(I-45)/BELTWAY 8 WEST ramp. Merge on the highway. Take the
HARDY TOLL ROAD exit. Continue on BELTWAY 8/N BELT DR E/N SAM
HOUSTON PKY E. Turn Left on W HARDY RD. Look for Auction Signs.
THINKING OF HAVING AN
AUCTION?
NEED AN APPRAISAL?
KNOW OF A PLANT CLOSURE?
CALL:
(818) 508-7034 EXT. 12
(16) 1990’s Overhead Cranes, Single Girder, 56’ Span:
10-T, (2) 7 1/2-T & (13) 5-T DEMAG, s/n’s 74164 thru
74177; 5-T DESHAZO. To Be Sold Via Photo.
Located in Chester, SC.
AIR COMPRESSORS
(5) SPEED AIR, 5HP. • QUINCY 5HP • INGERSOLL
RAND 20HP • (3) ATLAS COPCO, 25HP.
VEHICLES
2000 BONNEVILL SE 4-Door
1999 CHEVY C1500 2WD Ext. Cab Pickup.
1999 CHEVY C2500 Suburban.
1998 CHRYSLER Concord.
(3) 1998 CHEVY C1500 141.5 2WD Ext. Cab Pickups.
1998 LINCOLN Navigator Utility.
1998 CHEVY 2500 2WD Suburban.
1997 CHEVY C1500 Ext. Cab & 3-Door 4WD.
(2) 1997 FORD F-150 2WD Ext Cab Pickup 3DR.
1997 FORD T-150 Ext Cab.
UNIQUE CHEVY HUNTING/DEER FEEDER,
3/4 Dually, 4WD, (4) Hunter Seats, Upper & Lower
Drive Stations.
MISCELLANEOUS
CHICAGO Riveter, s/n 90-598 • Various Gear Boxes
• Heads • Electric Panels • SIGNODE Band • (2)
DELTA/DEWALT Cutoff Saws • (5) Hyd. Units • FMC
Sweepers • Racks & Much, Much More!
TERMS
Sale Conducted by: Industrial Assets, Inc., Subject
to our customary terms of sale, (Available at the
auction site on the day of the sale), and any and all
amendments and modifications announced by the
auctioneer at the time of the auction. The
auctioneer and seller make no warranties or
guarantees, expressed or implied, as to the
defects in or the correctness or accuracy of the
descriptions in any advertising of any item(s)
being auctioned and will not be responsible for
any advertising discrepancies or inaccuracies of
any kind. All items sold will be on an “AS IS”,
“WHERE IS”, and “WITH ALL FAULTS”, basis
“WITHOUT EXCEPTION” and “WITH REMOVAL AT
BUYER’S RISK AND EXPENSE”. AUCTIONEER AND
SELLER MAKE NO WARRANTIES OR GUARANTEES
OF ANY KIND, EXPRESSED OR IMPLIED AS TO THE
NATURE, QUALITY, VALUE OR CONDITION OF THE
ITEM(S)
BEING
AUCTIONED
OR
ITS
(THEIR)SUITABILITY FOR ANY USE. AUCTIONEER
AND SELLER EXPRESSLY AND SPECIFICALLY
DISCLAIM WITHOUT LIMITATION ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. AUCTIONEER SHALL NOT
BE LIABLE FOR SPECIAL, CONSEQUENTIAL OR
INCIDENTAL DAMAGES. It shall be the buyer’s
obligation to verify information and descriptions of
property prior to sale. Industrial Assets, Inc., and
its advertising agency assume no liability for
errors or omissions in this brochure. The
auctioneer does not warrant the age,accuracy,
genuineness, authenticity, description, weight,
count or measure of any listings specified herein.
Although it is not likely, auction sales are subject
to cancellation or postponement, and sometimes
items are withdrawn from the sale, kindly contact
Industrial Assets, Inc., prior to travel as there will
23
be no reimbursements. On the day of the sale, all
successful bidders must immediately pay the full
purchase price in cash, certified funds, cashiers
check, wire transfer or company check with a
letter from the buyer’s bank guaranteeing
unqualified payments to Industrial Assets, Inc.
Your letter should be similar to the following: [Mr.
“Customer Name” is a customer of this bank. This
bank will guarantee unqualified payment to
Industrial Assets, Inc. on the account listed herein
up to the amount of $______. This letter is valid
until 30 working days after the auction sale.]
Company checks without letter from bank
guaranteeing unqualified payment will not be
accepted. The failure to make payment promptly
shall be considered default and each lot or lots so
purchased will be placed for resale. The buyer
must pay the total invoice price for all the lots
purchased before any removal can begin. All
buyers must pay applicable sales tax (unless
evidence of exemption is provided to auctioneer’s
satisfaction). Buyers are responsible for the
transportation, associated costs and risks involved
in the removal of purchased item(s). Certain items
may contain residual chemicals and/or hazardous
materials. The purchaser(s) hereby indemnify and
hold harmless the auctioneer and seller from any
and all damages, claims or liability from any
injuries to persons or property of any type
whatsoever caused during the sale of, during the
removal, or during use or operation of the
purchased item(s). If you are unable to attend,
please contact us regarding placing a proxy bid.
ALL ITEMS SUBJECT TO PRIOR SALE. PLEASE
NOTE: All sales are subject to a 10% buyer’s
premium.
A Unique Opportunity to Purchase Assets which have
Become Available Due to the Merger of
MBCI & NCI Metal Component Manufacturers
MBCI & NCI
10:30 A.M., THURSDAY, JUNE 20
14031 W. HARDY, HOUSTON, TX
Inspection: 9 a.m.-4 p.m., Wednesday, June 19 & Morning of Sale
STATE-OF-THE-ART PRE FAB METAL BUILDING/
STUD & TRACK MANUFACTURER
UPCOMING AUCTIONS
#1
#2
Discontinued Operations of: THOMAS FOUNDRY, INC.
LATE MODEL FOUNDRY EQUIPMENT & MACHINE SHOP
June 11 • Birmingham, AL
Discontinued Operations of: MCNALLY MANUFACTURING
A Division of Metso Minerals Industries, Inc.
LARGE CAPACITY MULTI-MILLION MACHINE TOOL & FABRICATION FACILITY
June 13 • Pittsburg, KS
LIGHT CONSTRUCTION, RENTAL YARD &
#3 INDUSTRIAL EQUIPMENT
June 15 • Los Angeles, CA
By Order of US Bankruptcy Court, Case #01-24328-BM:
HASKELL SENATOR INTERNATIONAL, INC.
#4 MFR. OF EXECUTIVE OFFICE FURNITURE, LATERAL FILES, FILE CABINETS
#5
#6
#7
#8
BIDITUP
An Industrial Assets Company
BIDITUP!
11426 Ventura Blvd.
Second Floor
Studio City, CA 91604
TX Lic. #AUCTNR000104
STAMPING, ROLLFORMING * FABRICATING FACILITY
June 18 • Verona, PA
Surplus to Ongoing Operations of: KURT MANUFACTURING
LATE MODEL NEW BRITAIN SCREW MACHINES
June 26 • Coon Rapids, MN
DOMINION CASTINGS LIMITED
FOUNDRY EQUIPMENT
June 27 • Hamilton, ONT., Canada
ONLINE AUCTION
(4) VERSON WHEELON PRESSES
July 23 • www.biditup.net
SECURITY PLASTICS, INC.
TOOL & DIE MOLD MAKING FACILITY
Late July • St. Petersburg, FL
Tel: (818) 508-7034
Fax: (818) 508-3025
www.biditup.net
email: [email protected]
FIRST CLASS
PRE-SORT MAIL
U.S. POSTAGE
P A I D
PERMIT NO. 32365
LOS ANGELES, CA