AUCTION SALE - National Machinery Exchange

AUCTION SALE
171 Central Avenue
Hillside, New Jersey 07205 USA
United States Bankruptcy Court District of New Jersey
Case No: 09-11467 (MS)
1 of 3
2004
1991
1996
EIWA Mdl. ED-C-4 De-Scaler
Hakusan Mdl. BS-5T Heated
Pressure Welder
Featuring: Sirio/M&E 24-Strand Annealing Line 2003
• Koch Wire Drawing Lines (new as 2001-2005) with
Spoolers, Dead Blocks • Bull Blocks • Inverted Vertical Bull
Blocks • Wire Straighteners & Cut-Offs • Bell Furnaces •
De-Scalers • Large Quantity of Wire Drawer Dies • Lab
Equipment & Tensile Testers • Plus Much More!!
IMPORTANT NOTICE: Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as
to the accuracy of the information herein contained. It is for this reason that buyers
should avail themselves of the opportunity to make inspection prior to the sale.
Vaughn 6/7HR Wire Drawers
M&E Vertical Spooler
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: A 13%
buyer’s premium will apply. A minimum deposit of 25% on all lots purchased is
required at the time of sale. All checks for deposits and balances due shall be payable
to the order of KOSTER INDUSTRIES INC. All bills must be paid to representatives of
the auctioneer at the plant unless otherwise announced. The full purchase price on
all lots to the same buyer must be paid within the time fixed and before removal of
any of the goods. Payments are accepted in the form of cash, cashiers check made
payable to KOSTER INDUSTRIES INC., wire transfer, or business check accompanied
by an approved bank letter of guarantee payable to KOSTER INDUSTRIES INC.
WIRE PROCESSING FACILITY
for Carbon, Alloy and Stainless Steel Wire
171 Central Avenue
Hillside, New Jersey 07205 USA
United States Bankruptcy Court District of New Jersey
Case No: 09-11467 (MS)
sale Date: Thursday, June 25th, 2009 at 10:30 a.m.
View of 4-Way Pointers
AUCTIONEERS • LIQUIDATORS • APPRAISERS
555 Broadhollow Road, Melville, New York 11747
(631) 454-1766 • Fax (631) 454-1779
Presorted
First-Class Mail
U.S. Postage
Inspection Dates: Wednesday, June 24th, 2009 from 8:00 a.m. to 4:00 p.m. and morning of sale
PAID
Minneapolis, MN
Permit #3723
2004
View of Die-Quip Die Polishers
Balloffet Mdl. BA-130
Ultrasonic Polisher
Tinius Olsen Tensile Tester
LAB & QUALITY CONTROL
Duriron Filter Press with 31 Plates
View of Lab & Inspection
2001
AXP/9050300
Tinius Olsen Tensile Tester, with Dell
computer
AUCTION SALE
[2] Tinius Olsen 60K Tensile Testers
Zumbach Type ODAC30.80 OD Inspection
Unit, S/N: 7396-0003
Shimadzu Type H Micro Hardness Tester,
S/N: 82592
Buehler Versamat 3 Metallograph
& Scope
Rockwell Wilson Mdl. 4JR-ARB
Hardness Tester, S/N: 8360
Leco Mdl. VP-160/HP-60 Lapper/
Polisher
Mettler Mdl. AK160 Digital Scale
Laser Mike 183 OD Tester
Buehler Surfmet I Belt Surfacer
Enco Mdl. 137-3178 Horizontal Bandsaw,
S/N: 470178
Miscellaneous in Machine Shop: Lincoln
Idealarc CV-300 Welder with LN-7 Wire
Feed; L-Tec Plasmarc PCM-70 Plasma
Cutter; Miller 330A/BP Welder; Long 12"
Disc & 6" Belt Sander; Tool Boxes, Welding
Supplies, Vises, Nuts & Bolts, Power Tools,
Drills, Taps, Electrical Parts, Etc.
FILTER PRESS & WATER
TREATMENT
Duriron 31-Plate Filter Press, with
32" x 32" Square Plates, Clarifier System
& Agitators
BOILER
Kewanee Mdl. L3S-300GO 300HP Gas
Fired Boiler, MWP 15-psig
MISCELLANEOUS MACHINERY
[2] 30HP Sullair Mdl. 10-30L Rotary
Screw Type Air Compressors,
S/Ns: 9578-NLF; 29083-TGF
Fume Scrubber System, with Hoods,
Pump, Controls, Etc.
FORKLIFTS & MANLIFT
[3] Shaw Box “Lif-Tech” 2 Ton Electric
Hoists, Mounted on Jibs
Eagle Mdl. 32/21JR 500# Capacity
Snorkel Lift, S/N: 13267
[2] Shaw Box 2 Ton 360 Degree Floor
Mounted Jib Cranes
5400# Hyster Mdl. S60XL2 Propane
Forklift, with 182" Reach, Forks, Hard
Tires, S/N: C187V161295
Assorted Carbon Steel Dip Tanks
Ribbon Blender, 5HP Motor, 48" Long x 24"
Wide x 22" Deep, with Bottom Discharge
5800# Hyster Mdl. H60XM Propane Lift,
with Pole Coil Attachment, 181" Reach,
Hard Tires, S/N: H177B52805B
Marley “Primus” Cooling Tower, with
Frick Evaporative Heat Transfer Unit
3500# Hyster Mdl. H60XL Propane
Forklift, with Forks, 187" Reach, Hard
Tires, S/N: C177B05186N
AIR COMPRESSORS
100HP Ingersoll Rand Mdl. SSR-EP100
Rotary Screw Type Air Compressor,
445-cfm, S/N: F15007095212
Large Quantity of Alloy and
Stainless Steel Wire
100HP Sullair Mdl. 20-100L Rotary Screw
Type Air Compressor, S/N: 003-61846
Can’t Attend the Auction?
Bid Online at www.bidspotter.com
5
Buehler Pneumet I Mounting Press
Leco Mdl. CM-15 Cut-Off Machine
MISCELLANEOUS
THROUGHOUT PLANT
Enormous Quantity of Heavy Duty Hi-Hats,
Strapping Machines, Fans, Self Dumping
Scrap Hoppers, Portable Wire Shears, Bench
Grinders, Pallet Jacks, Storage Cabinets,
Welding Equipment, Benches, Large Quantity
of Valves, [2] Club Car Electric Cars (as is),
Assorted Digital Platform Scales, Pumps &
Motors, Assorted Electrical Boxes & Control
Cabinets, Assorted 4' x 10' (Approx.) Flat
Plate Heat Exchangers, Etc.
Featuring: Sirio/M&E 24-Strand Annealing Line 2003
• Koch Wire Drawing Lines (new as 2001-2005) with
Spoolers, Dead Blocks • Bull Blocks • Inverted Vertical Bull
Blocks • Wire Straighteners & Cut-Offs • Bell Furnaces •
De-Scalers • Large Quantity of Wire Drawer Dies • Lab
Equipment & Tensile Testers • Plus Much More!!
WIRE PROCESSING FACILITY
for Carbon, Alloy and Stainless Steel Wire
Partial Views of
2003 Sirio/M&E
Annealing Line
171 Central Avenue
Hillside, New Jersey 07205 USA
United States Bankruptcy Court District of New Jersey
Case No: 09-11467 (MS)
Large
Quantity of Alloy
and Stainless Steel
Wire
Inspection Dates: Wednesday, June 24th, 2009 from 8:00 a.m. to 4:00 p.m. and morning of sale
Directions:
2003
Newark Liberty International Airport: Take U.S.-9/U.S.-1 ramp towards Rte. 21 – take Haynes
Ave. exit and proceed to Meeker Ave. and make right turn – go about ½ mile to Elizabeth Ave. and
turn left – this will turn into N. Broad Street, N. Broad will go to left, stay on N. Broad – proceed to
Central Ave. and turn right – about 20 minutes travel time.
Lewis Mdl. 11-F Wire Straightener & Cut-Off
JFK International: Take Belt Pkway. towards I-768/Van Wyck Expway. – Stay on Belt Pkway.
west towards Verrazano Bridge – take Exit 3 off Belt Pkway. and go over the Verrazano Bridge into
Staten Island – continue thru Staten Island on I-278 – take the Goethals Bridge into NJ and then
take I-95N after paying toll – proceed to exit 13A and merge onto NJ-81N towards U.S. 1&9 toward
Elizabeth/Trenton – go about ½ mile and turn right on North Ave. – go about 1 mile and then turn
right on N. Broad Street – go about 1 mile and turn left on Central Ave. – go about ½ mile to plant.
1992
1 of 2
Pickup truck
1988 GMC
Koch KGT 25/5 Wire Drawer Line
sale Date: Thursday, June 25th, 2009 at 10:30 a.m.
OFFICES
Wood Executive Desks & Credenzas, File
Cabinets, HP C5280 Printer, Flat Screen
Monitors, Conference Room, Office
Partitioning, Datamax Labelers, HP Laserjet
M1522NF Printer, Cloth Wood Chairs, Xerox
Work Centre M15I, Refrigerator, Kitchen
Table & Chairs, Folding Tables, Displays, HP
Officejet Pro L7580, Secretarial Chairs, High
Back Office Chairs, Etc.
Koch KGT 1600/2-1000/5 Wire Drawer Line
2004
EIWA Mdl. EK-610 Dead Blocks
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
Laguardia International Airport: Take Grand Central Pkway. East for about 5 miles and take
I-678S/Van Wyck Expway. – proceed to exit 1W (Belt Pkway.) west towards Verrazano Bridge/
Staten Island – take Belt Pkway. to Exit #3 and then follow directions from above.
Hotels
Hilton Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 908 351 3900
Sheraton Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 973 690 5500
Hampton Inn Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 908 355 0500
Lewis Mdl. 8-F Wire Straightener & Cut-Off
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
1990
View of Vaughn HPJ4 98" Bull Blocks &
Induction Heater, Coating Unit
EIWA Mdl. EG-5 Inverted Wire Drawer
1985
EIWA Mdl. EG-5 Inverted
Wire Drawer
View of Shuster 1AVS5 & Lewis 3F Wire
Straighteners & Cut-Offs
View of 2003 Annealing Line
SIRIO/M&E STRAND ANNEALING LINE (new 2003)
•24-Position Floor Mounted Pay-Off Sections, 4000#
Capacity Spools
•Sirio Electrolytic Cleaning Unit & Ultrasonic Cleaner, with
Giussani 4000 CCDC Rectifier, S/N: 0307R02
•[1] 24-Tube North American 4-Zone Furnaces, with Digital
Controls, PLC, Gas Fired
•Cooling Tank
•M&E 24-Position Inverted Take-Up with Individual
Vari-Speed Drives, Each Position with Draw Die
•Idroenergy Hydrogen Generator
View of 2001 Koch KGT 1600/2-1000/5 Wire Drawer Lines
WIRE DRAWING LINE
Koch Wire Drawing “Tunerline” #1, consisting of:
•Koch Hydraulic Tilt-Up Booms & Double Payoff,
6000# Capacity
•Koch Mdl. KGT1600/2 1000/5, 7-Block Wire Drawer,
[7] 50HP Motors, Vari-Speed, Siemens Drive &
Controls, PLC, 2300fpm, Dust Collection System,
S/N: 15986 (2001)
•Koch Dead Block, Mdl. KEWS42, with Drawing Die,
S/N 19587 (2001)
•Koch KVS1000 High Speed Spooler, 22"-24", with
32" Max OD, 7mm Regular Wire, 50HP Drive,
S/N: 18026 (2005)
BELL ANNEALING FURNACE
Can’t Attend the Auction?
Bid Online at
www.bidspotter.com
Rad-Con Bell Annealing Furnace, 132" Diameter x 10' Tall, with [19] Side
Mounted Jets, Gas Fired, [2] Bases, Pit Mounted, Controls (Rebuilt 2004)
WIRE DRAWING LINES
View of 2004 Koch KGT 25/5 Wire Drawer Line
[3] Vaughn Mdl. 6/7HR 5-Block Wire
Drawing Lines, 20" Diameter Blocks,
[5] 60HP DC Motors
EIWA Mdl. EG-15 Inverted Wire Drawer
BULL BLOCKS
INVERTED WIRE DRAWERS WIRE STRAIGHTENERS
EIWA Mdl. EG-7 3-Block Inverted & CUT-OFFS
Vaughn Mdl. 12-22 Bull Block, with 28"
Diameter, 125HP Drive, S/N: 9428, with
Control Technique DC Motor Drive
•EIWA Coating Unit, S/N: 101129 (1984)
•Lepel Mdl. LSP200 Induction Heater
2004
WIRE DRAWING LINE
Koch Wire Drawing “Tunerline” #2, consisting of:
•Koch Hydraulic Tilt-Up Booms & Double Payoff, 6000# Capacity
•Koch Mdl. KGT25/5, 5-Block Wire Drawer, [5] 50HP Motors, 22" Blocks, 26" Blocks, Siemens Drives & Controls, PLC, 2000fpm Dust
Collection System, S/N: 17535 (2004)
•Koch Dead Block, Mdl. KEWS-IV-2, with Drawing Die, S/N 17536 (2004)
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
EIWA Mdl. EG-5 3-Block Inverted
Wire Drawer, with Dancer Rolls,
Line Pre-Set Counters, Vari-Speed,
S/N: 17045 (1990)
Miyazaki Horizontal Bull Block, 75kW
AC Drive, 36" Diameter Block, Inground
Recoiler 72" Max. Coil Diameter, De-Scaler
EIWA Mdl. EG-5 2-Block Inverted
Wire Drawer, with Push Button
Controls, S/N: 070011 (1985)
Herborn 2-Die Bull Block, 30" Block,
Spare Drive, 90HP Motor
EIWA Mdl. EG-15 Inverted Wire
Drawer, with Shaving Head, Payoff
with Snag Control, S/N: 17016
[4] Herborn Bull Blocks, 20" Diameter
Blocks, 30HP Motor, AC Motor Drives
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
2
Wire Drawer, with Dancer Rolls,
Vari-Speed, Line Speed Motor, PreSet Counter, S/N: 17057 (1994)
Vaughn “Motoblox” Bull Block, Size 13,
Single Deck, 60HP Motor, 10' Arm Payoff,
Solid State Controls, S/N: 5843
EIWA Mdl. ED-650 Bull Block, 75HP Motor,
28" Diameter Block (1984)
View of Miyazakisieko Inverted Wire Drawers
1984
[2] Miyazaki Seiko Inverted Wire
Drawers, with Vari-Speed, Digital
Counter, Tram Car, Hoists, Payoffs
with Snag Control
EIWA Mdl. ED-650 Bull Block
DEAD BLOCKS
Ernst Koch Mdl. KEWS4Z Dead
Lewis Mdl. 11-F Wire Straightener Block, with PLC Control, S/N: 15987
(2001) (LINE 1)
& Cut-Off, with 20' Run-Out,
S/N: 1139
Ernst Koch MDl. KEWS-IV-Z Dead
Lewis Mdl. 8-F Wire Straightener Block, with PLC Control, S/N: 17536
(2004) (LINE 2)
& Cut-Off, with 21' Run-Out,
S/N: 166
[2] EIWA Mdl. EK-610 Dead Blocks,
S/Ns: 061215 (1992); 061186
[4] Lewis Mdl. 4-F Wire
Straightener & Cut-Off, [4] with
BELL ANNEALING FURNACES
13' Run-Outs, S/Ns: 262; [5] @ N/A
2001
[2] Rad-Con Bell Annealing
[2] Lewis Mdl. 3-F Wire
Furnaces,10' Diameter x 8' Tall,
Straightener & Cut-Off, [1] with
Pit Mounted, Gas Fired, Lee Wilson
3-1/2' Run-Out, [1] with 13' RunInstrument Panels, Leeds & Northrup Ernst Koch Mdl. KEWS4Z Dead Block
Out, S/Ns: 225; 194
Controls, Each Unit Equipped with
SPOOLERS
Shuster Mdl. 1AVS5 Wire
2 Bases
Straightener & Cut-Off, S/N: 335
M&E Vertical Spooler, with Solid State Controls, 28kW Motor
[2] Lee Wilson Bell Annealing
(New 2004)
Shuster Mdl. 1AVS3 Wire
Furnaces, 6' Diameter x 8' Tall,
Straightener & Cut-Off, with
Pit Mounted, Gas Fired, Lee
Horizontal Spooler, 24" Diameter, with 2-Plane Inline Straightener,
13' Run-Out, S/N: 181-61
Wilson Instrument Panels, Leeds
Vari-Speed, Fincon Adjustable Speed Drive
& Northrup Controls, Each Unit
Equipped with 2 Bases
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
3
Partial View of Large Quantity of
Carbide & Diamond Wire Drawer Dies
View of Bell Furnaces
WIRE DE-SCALERS
EIWA Mdl. ED-CB-9 Wire De-Scaler,
S/N: 101208 (1991)
[5] EIWA Mdl. ED-CB-8 Wire De-Scalers,
S/Ns: 10130 (1984); 10129 (1984); 101121
(1983); 101127 (1984); N/A
EIWA Mdl. ED-CB Wire De-Scaler,
S/N: 101176 (1990)
EIWA Mdl. ED-C-4 Wire De-Scaler,
S/N: 101205 (1991)
WIRE BUTT WELDERS
•Strecker Wire Butt Welder, S/N: 30876
•Ideal Mdl. DS8 Wire Butt Welder
•Micro-Products Mdl. J5S & #1 Wire Butt
Welder
MACHINE SHOP
•Hakusan Mdl. BS-5T Heated Pressure
Welder, 7mm, S/N: 9536 (1996)
Die-Quip Die Polisher Mdl. DQ-PG2,
S/N: 172PG2-1
•Plus Many Others
[2] Roos Mdl. OT, S/Ns: S174; 8377
POINTERS
[2] Vertical ID Die Finishers, Oscillating
Vaughn 4-Roll Pointer, with [8] Horizontal
Positions, [6] Vertical Positions
Vaughn 4-Roll Pointer, with [12]
Horizontal Positions, [12] Vertical Positions
[5] Vaughn 2-Roll Pointer, with 10-Position,
S/Ns: 7603; 7525; 7524; N/A; N/A
Herborn Mdl. ASIII Wire Pointer,
S/N: 65/41543
Ballofet Mdl. BA-130 Ultrasonic Cleaner
(2004)
DIE MAINTENANCE
Also Available: [8] Iconel Hooks (for Coil)
Enco 2HP Vertical Mill, with R-8 Spindle,
9" x 42" Table, Pulley Head
AUTOMATED CRANE
Keramchemie Automation Coil Crane for
Dip Line, with Approximately 300' Runway,
Impulse VG Series Flux Crane Controls, ICS
Infrared Range Finder (with Spare), Impulse
GT Adjustable Frequency Control Drive, Etc.
16" x 24" Enco Mdl. 111-3300 Lathe,
with inch/mm Threading, 2000 rpm,
Camloc Spindle
16" DoAll Vertical Bandsaw, with Welder/
Grinder
Bridgeport 1HP Vertical Mill,
S/N: 12BR230157
DoAll 6" x 18" Surface Grinder
16" x 36" Southbend Lathe, with Taper
Attachment, CAT #CL8117D
Die-Quip Die Polisher Mdl. DQ-BG,
S/N: 105BG
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
4
1990
View of Vaughn HPJ4 98" Bull Blocks &
Induction Heater, Coating Unit
EIWA Mdl. EG-5 Inverted Wire Drawer
1985
EIWA Mdl. EG-5 Inverted
Wire Drawer
View of Shuster 1AVS5 & Lewis 3F Wire
Straighteners & Cut-Offs
View of 2003 Annealing Line
SIRIO/M&E STRAND ANNEALING LINE (new 2003)
•24-Position Floor Mounted Pay-Off Sections, 4000#
Capacity Spools
•Sirio Electrolytic Cleaning Unit & Ultrasonic Cleaner, with
Giussani 4000 CCDC Rectifier, S/N: 0307R02
•[1] 24-Tube North American 4-Zone Furnaces, with Digital
Controls, PLC, Gas Fired
•Cooling Tank
•M&E 24-Position Inverted Take-Up with Individual
Vari-Speed Drives, Each Position with Draw Die
•Idroenergy Hydrogen Generator
View of 2001 Koch KGT 1600/2-1000/5 Wire Drawer Lines
WIRE DRAWING LINE
Koch Wire Drawing “Tunerline” #1, consisting of:
•Koch Hydraulic Tilt-Up Booms & Double Payoff,
6000# Capacity
•Koch Mdl. KGT1600/2 1000/5, 7-Block Wire Drawer,
[7] 50HP Motors, Vari-Speed, Siemens Drive &
Controls, PLC, 2300fpm, Dust Collection System,
S/N: 15986 (2001)
•Koch Dead Block, Mdl. KEWS42, with Drawing Die,
S/N 19587 (2001)
•Koch KVS1000 High Speed Spooler, 22"-24", with
32" Max OD, 7mm Regular Wire, 50HP Drive,
S/N: 18026 (2005)
BELL ANNEALING FURNACE
Can’t Attend the Auction?
Bid Online at
www.bidspotter.com
Rad-Con Bell Annealing Furnace, 132" Diameter x 10' Tall, with [19] Side
Mounted Jets, Gas Fired, [2] Bases, Pit Mounted, Controls (Rebuilt 2004)
WIRE DRAWING LINES
View of 2004 Koch KGT 25/5 Wire Drawer Line
[3] Vaughn Mdl. 6/7HR 5-Block Wire
Drawing Lines, 20" Diameter Blocks,
[5] 60HP DC Motors
EIWA Mdl. EG-15 Inverted Wire Drawer
BULL BLOCKS
INVERTED WIRE DRAWERS WIRE STRAIGHTENERS
EIWA Mdl. EG-7 3-Block Inverted & CUT-OFFS
Vaughn Mdl. 12-22 Bull Block, with 28"
Diameter, 125HP Drive, S/N: 9428, with
Control Technique DC Motor Drive
•EIWA Coating Unit, S/N: 101129 (1984)
•Lepel Mdl. LSP200 Induction Heater
2004
WIRE DRAWING LINE
Koch Wire Drawing “Tunerline” #2, consisting of:
•Koch Hydraulic Tilt-Up Booms & Double Payoff, 6000# Capacity
•Koch Mdl. KGT25/5, 5-Block Wire Drawer, [5] 50HP Motors, 22" Blocks, 26" Blocks, Siemens Drives & Controls, PLC, 2000fpm Dust
Collection System, S/N: 17535 (2004)
•Koch Dead Block, Mdl. KEWS-IV-2, with Drawing Die, S/N 17536 (2004)
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
EIWA Mdl. EG-5 3-Block Inverted
Wire Drawer, with Dancer Rolls,
Line Pre-Set Counters, Vari-Speed,
S/N: 17045 (1990)
Miyazaki Horizontal Bull Block, 75kW
AC Drive, 36" Diameter Block, Inground
Recoiler 72" Max. Coil Diameter, De-Scaler
EIWA Mdl. EG-5 2-Block Inverted
Wire Drawer, with Push Button
Controls, S/N: 070011 (1985)
Herborn 2-Die Bull Block, 30" Block,
Spare Drive, 90HP Motor
EIWA Mdl. EG-15 Inverted Wire
Drawer, with Shaving Head, Payoff
with Snag Control, S/N: 17016
[4] Herborn Bull Blocks, 20" Diameter
Blocks, 30HP Motor, AC Motor Drives
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
2
Wire Drawer, with Dancer Rolls,
Vari-Speed, Line Speed Motor, PreSet Counter, S/N: 17057 (1994)
Vaughn “Motoblox” Bull Block, Size 13,
Single Deck, 60HP Motor, 10' Arm Payoff,
Solid State Controls, S/N: 5843
EIWA Mdl. ED-650 Bull Block, 75HP Motor,
28" Diameter Block (1984)
View of Miyazakisieko Inverted Wire Drawers
1984
[2] Miyazaki Seiko Inverted Wire
Drawers, with Vari-Speed, Digital
Counter, Tram Car, Hoists, Payoffs
with Snag Control
EIWA Mdl. ED-650 Bull Block
DEAD BLOCKS
Ernst Koch Mdl. KEWS4Z Dead
Lewis Mdl. 11-F Wire Straightener Block, with PLC Control, S/N: 15987
(2001) (LINE 1)
& Cut-Off, with 20' Run-Out,
S/N: 1139
Ernst Koch MDl. KEWS-IV-Z Dead
Lewis Mdl. 8-F Wire Straightener Block, with PLC Control, S/N: 17536
(2004) (LINE 2)
& Cut-Off, with 21' Run-Out,
S/N: 166
[2] EIWA Mdl. EK-610 Dead Blocks,
S/Ns: 061215 (1992); 061186
[4] Lewis Mdl. 4-F Wire
Straightener & Cut-Off, [4] with
BELL ANNEALING FURNACES
13' Run-Outs, S/Ns: 262; [5] @ N/A
2001
[2] Rad-Con Bell Annealing
[2] Lewis Mdl. 3-F Wire
Furnaces,10' Diameter x 8' Tall,
Straightener & Cut-Off, [1] with
Pit Mounted, Gas Fired, Lee Wilson
3-1/2' Run-Out, [1] with 13' RunInstrument Panels, Leeds & Northrup Ernst Koch Mdl. KEWS4Z Dead Block
Out, S/Ns: 225; 194
Controls, Each Unit Equipped with
SPOOLERS
Shuster Mdl. 1AVS5 Wire
2 Bases
Straightener & Cut-Off, S/N: 335
M&E Vertical Spooler, with Solid State Controls, 28kW Motor
[2] Lee Wilson Bell Annealing
(New 2004)
Shuster Mdl. 1AVS3 Wire
Furnaces, 6' Diameter x 8' Tall,
Straightener & Cut-Off, with
Pit Mounted, Gas Fired, Lee
Horizontal Spooler, 24" Diameter, with 2-Plane Inline Straightener,
13' Run-Out, S/N: 181-61
Wilson Instrument Panels, Leeds
Vari-Speed, Fincon Adjustable Speed Drive
& Northrup Controls, Each Unit
Equipped with 2 Bases
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
3
Partial View of Large Quantity of
Carbide & Diamond Wire Drawer Dies
View of Bell Furnaces
WIRE DE-SCALERS
EIWA Mdl. ED-CB-9 Wire De-Scaler,
S/N: 101208 (1991)
[5] EIWA Mdl. ED-CB-8 Wire De-Scalers,
S/Ns: 10130 (1984); 10129 (1984); 101121
(1983); 101127 (1984); N/A
EIWA Mdl. ED-CB Wire De-Scaler,
S/N: 101176 (1990)
EIWA Mdl. ED-C-4 Wire De-Scaler,
S/N: 101205 (1991)
WIRE BUTT WELDERS
•Strecker Wire Butt Welder, S/N: 30876
•Ideal Mdl. DS8 Wire Butt Welder
•Micro-Products Mdl. J5S & #1 Wire Butt
Welder
MACHINE SHOP
•Hakusan Mdl. BS-5T Heated Pressure
Welder, 7mm, S/N: 9536 (1996)
Die-Quip Die Polisher Mdl. DQ-PG2,
S/N: 172PG2-1
•Plus Many Others
[2] Roos Mdl. OT, S/Ns: S174; 8377
POINTERS
[2] Vertical ID Die Finishers, Oscillating
Vaughn 4-Roll Pointer, with [8] Horizontal
Positions, [6] Vertical Positions
Vaughn 4-Roll Pointer, with [12]
Horizontal Positions, [12] Vertical Positions
[5] Vaughn 2-Roll Pointer, with 10-Position,
S/Ns: 7603; 7525; 7524; N/A; N/A
Herborn Mdl. ASIII Wire Pointer,
S/N: 65/41543
Ballofet Mdl. BA-130 Ultrasonic Cleaner
(2004)
DIE MAINTENANCE
Also Available: [8] Iconel Hooks (for Coil)
Enco 2HP Vertical Mill, with R-8 Spindle,
9" x 42" Table, Pulley Head
AUTOMATED CRANE
Keramchemie Automation Coil Crane for
Dip Line, with Approximately 300' Runway,
Impulse VG Series Flux Crane Controls, ICS
Infrared Range Finder (with Spare), Impulse
GT Adjustable Frequency Control Drive, Etc.
16" x 24" Enco Mdl. 111-3300 Lathe,
with inch/mm Threading, 2000 rpm,
Camloc Spindle
16" DoAll Vertical Bandsaw, with Welder/
Grinder
Bridgeport 1HP Vertical Mill,
S/N: 12BR230157
DoAll 6" x 18" Surface Grinder
16" x 36" Southbend Lathe, with Taper
Attachment, CAT #CL8117D
Die-Quip Die Polisher Mdl. DQ-BG,
S/N: 105BG
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
4
1990
View of Vaughn HPJ4 98" Bull Blocks &
Induction Heater, Coating Unit
EIWA Mdl. EG-5 Inverted Wire Drawer
1985
EIWA Mdl. EG-5 Inverted
Wire Drawer
View of Shuster 1AVS5 & Lewis 3F Wire
Straighteners & Cut-Offs
View of 2003 Annealing Line
SIRIO/M&E STRAND ANNEALING LINE (new 2003)
•24-Position Floor Mounted Pay-Off Sections, 4000#
Capacity Spools
•Sirio Electrolytic Cleaning Unit & Ultrasonic Cleaner, with
Giussani 4000 CCDC Rectifier, S/N: 0307R02
•[1] 24-Tube North American 4-Zone Furnaces, with Digital
Controls, PLC, Gas Fired
•Cooling Tank
•M&E 24-Position Inverted Take-Up with Individual
Vari-Speed Drives, Each Position with Draw Die
•Idroenergy Hydrogen Generator
View of 2001 Koch KGT 1600/2-1000/5 Wire Drawer Lines
WIRE DRAWING LINE
Koch Wire Drawing “Tunerline” #1, consisting of:
•Koch Hydraulic Tilt-Up Booms & Double Payoff,
6000# Capacity
•Koch Mdl. KGT1600/2 1000/5, 7-Block Wire Drawer,
[7] 50HP Motors, Vari-Speed, Siemens Drive &
Controls, PLC, 2300fpm, Dust Collection System,
S/N: 15986 (2001)
•Koch Dead Block, Mdl. KEWS42, with Drawing Die,
S/N 19587 (2001)
•Koch KVS1000 High Speed Spooler, 22"-24", with
32" Max OD, 7mm Regular Wire, 50HP Drive,
S/N: 18026 (2005)
BELL ANNEALING FURNACE
Can’t Attend the Auction?
Bid Online at
www.bidspotter.com
Rad-Con Bell Annealing Furnace, 132" Diameter x 10' Tall, with [19] Side
Mounted Jets, Gas Fired, [2] Bases, Pit Mounted, Controls (Rebuilt 2004)
WIRE DRAWING LINES
View of 2004 Koch KGT 25/5 Wire Drawer Line
[3] Vaughn Mdl. 6/7HR 5-Block Wire
Drawing Lines, 20" Diameter Blocks,
[5] 60HP DC Motors
EIWA Mdl. EG-15 Inverted Wire Drawer
BULL BLOCKS
INVERTED WIRE DRAWERS WIRE STRAIGHTENERS
EIWA Mdl. EG-7 3-Block Inverted & CUT-OFFS
Vaughn Mdl. 12-22 Bull Block, with 28"
Diameter, 125HP Drive, S/N: 9428, with
Control Technique DC Motor Drive
•EIWA Coating Unit, S/N: 101129 (1984)
•Lepel Mdl. LSP200 Induction Heater
2004
WIRE DRAWING LINE
Koch Wire Drawing “Tunerline” #2, consisting of:
•Koch Hydraulic Tilt-Up Booms & Double Payoff, 6000# Capacity
•Koch Mdl. KGT25/5, 5-Block Wire Drawer, [5] 50HP Motors, 22" Blocks, 26" Blocks, Siemens Drives & Controls, PLC, 2000fpm Dust
Collection System, S/N: 17535 (2004)
•Koch Dead Block, Mdl. KEWS-IV-2, with Drawing Die, S/N 17536 (2004)
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
EIWA Mdl. EG-5 3-Block Inverted
Wire Drawer, with Dancer Rolls,
Line Pre-Set Counters, Vari-Speed,
S/N: 17045 (1990)
Miyazaki Horizontal Bull Block, 75kW
AC Drive, 36" Diameter Block, Inground
Recoiler 72" Max. Coil Diameter, De-Scaler
EIWA Mdl. EG-5 2-Block Inverted
Wire Drawer, with Push Button
Controls, S/N: 070011 (1985)
Herborn 2-Die Bull Block, 30" Block,
Spare Drive, 90HP Motor
EIWA Mdl. EG-15 Inverted Wire
Drawer, with Shaving Head, Payoff
with Snag Control, S/N: 17016
[4] Herborn Bull Blocks, 20" Diameter
Blocks, 30HP Motor, AC Motor Drives
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
2
Wire Drawer, with Dancer Rolls,
Vari-Speed, Line Speed Motor, PreSet Counter, S/N: 17057 (1994)
Vaughn “Motoblox” Bull Block, Size 13,
Single Deck, 60HP Motor, 10' Arm Payoff,
Solid State Controls, S/N: 5843
EIWA Mdl. ED-650 Bull Block, 75HP Motor,
28" Diameter Block (1984)
View of Miyazakisieko Inverted Wire Drawers
1984
[2] Miyazaki Seiko Inverted Wire
Drawers, with Vari-Speed, Digital
Counter, Tram Car, Hoists, Payoffs
with Snag Control
EIWA Mdl. ED-650 Bull Block
DEAD BLOCKS
Ernst Koch Mdl. KEWS4Z Dead
Lewis Mdl. 11-F Wire Straightener Block, with PLC Control, S/N: 15987
(2001) (LINE 1)
& Cut-Off, with 20' Run-Out,
S/N: 1139
Ernst Koch MDl. KEWS-IV-Z Dead
Lewis Mdl. 8-F Wire Straightener Block, with PLC Control, S/N: 17536
(2004) (LINE 2)
& Cut-Off, with 21' Run-Out,
S/N: 166
[2] EIWA Mdl. EK-610 Dead Blocks,
S/Ns: 061215 (1992); 061186
[4] Lewis Mdl. 4-F Wire
Straightener & Cut-Off, [4] with
BELL ANNEALING FURNACES
13' Run-Outs, S/Ns: 262; [5] @ N/A
2001
[2] Rad-Con Bell Annealing
[2] Lewis Mdl. 3-F Wire
Furnaces,10' Diameter x 8' Tall,
Straightener & Cut-Off, [1] with
Pit Mounted, Gas Fired, Lee Wilson
3-1/2' Run-Out, [1] with 13' RunInstrument Panels, Leeds & Northrup Ernst Koch Mdl. KEWS4Z Dead Block
Out, S/Ns: 225; 194
Controls, Each Unit Equipped with
SPOOLERS
Shuster Mdl. 1AVS5 Wire
2 Bases
Straightener & Cut-Off, S/N: 335
M&E Vertical Spooler, with Solid State Controls, 28kW Motor
[2] Lee Wilson Bell Annealing
(New 2004)
Shuster Mdl. 1AVS3 Wire
Furnaces, 6' Diameter x 8' Tall,
Straightener & Cut-Off, with
Pit Mounted, Gas Fired, Lee
Horizontal Spooler, 24" Diameter, with 2-Plane Inline Straightener,
13' Run-Out, S/N: 181-61
Wilson Instrument Panels, Leeds
Vari-Speed, Fincon Adjustable Speed Drive
& Northrup Controls, Each Unit
Equipped with 2 Bases
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
3
Partial View of Large Quantity of
Carbide & Diamond Wire Drawer Dies
View of Bell Furnaces
WIRE DE-SCALERS
EIWA Mdl. ED-CB-9 Wire De-Scaler,
S/N: 101208 (1991)
[5] EIWA Mdl. ED-CB-8 Wire De-Scalers,
S/Ns: 10130 (1984); 10129 (1984); 101121
(1983); 101127 (1984); N/A
EIWA Mdl. ED-CB Wire De-Scaler,
S/N: 101176 (1990)
EIWA Mdl. ED-C-4 Wire De-Scaler,
S/N: 101205 (1991)
WIRE BUTT WELDERS
•Strecker Wire Butt Welder, S/N: 30876
•Ideal Mdl. DS8 Wire Butt Welder
•Micro-Products Mdl. J5S & #1 Wire Butt
Welder
MACHINE SHOP
•Hakusan Mdl. BS-5T Heated Pressure
Welder, 7mm, S/N: 9536 (1996)
Die-Quip Die Polisher Mdl. DQ-PG2,
S/N: 172PG2-1
•Plus Many Others
[2] Roos Mdl. OT, S/Ns: S174; 8377
POINTERS
[2] Vertical ID Die Finishers, Oscillating
Vaughn 4-Roll Pointer, with [8] Horizontal
Positions, [6] Vertical Positions
Vaughn 4-Roll Pointer, with [12]
Horizontal Positions, [12] Vertical Positions
[5] Vaughn 2-Roll Pointer, with 10-Position,
S/Ns: 7603; 7525; 7524; N/A; N/A
Herborn Mdl. ASIII Wire Pointer,
S/N: 65/41543
Ballofet Mdl. BA-130 Ultrasonic Cleaner
(2004)
DIE MAINTENANCE
Also Available: [8] Iconel Hooks (for Coil)
Enco 2HP Vertical Mill, with R-8 Spindle,
9" x 42" Table, Pulley Head
AUTOMATED CRANE
Keramchemie Automation Coil Crane for
Dip Line, with Approximately 300' Runway,
Impulse VG Series Flux Crane Controls, ICS
Infrared Range Finder (with Spare), Impulse
GT Adjustable Frequency Control Drive, Etc.
16" x 24" Enco Mdl. 111-3300 Lathe,
with inch/mm Threading, 2000 rpm,
Camloc Spindle
16" DoAll Vertical Bandsaw, with Welder/
Grinder
Bridgeport 1HP Vertical Mill,
S/N: 12BR230157
DoAll 6" x 18" Surface Grinder
16" x 36" Southbend Lathe, with Taper
Attachment, CAT #CL8117D
Die-Quip Die Polisher Mdl. DQ-BG,
S/N: 105BG
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
4
AUCTION SALE
171 Central Avenue
Hillside, New Jersey 07205 USA
United States Bankruptcy Court District of New Jersey
Case No: 09-11467 (MS)
1 of 3
2004
1991
1996
EIWA Mdl. ED-C-4 De-Scaler
Hakusan Mdl. BS-5T Heated
Pressure Welder
Featuring: Sirio/M&E 24-Strand Annealing Line 2003
• Koch Wire Drawing Lines (new as 2001-2005) with
Spoolers, Dead Blocks • Bull Blocks • Inverted Vertical Bull
Blocks • Wire Straighteners & Cut-Offs • Bell Furnaces •
De-Scalers • Large Quantity of Wire Drawer Dies • Lab
Equipment & Tensile Testers • Plus Much More!!
IMPORTANT NOTICE: Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as
to the accuracy of the information herein contained. It is for this reason that buyers
should avail themselves of the opportunity to make inspection prior to the sale.
Vaughn 6/7HR Wire Drawers
M&E Vertical Spooler
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: A 13%
buyer’s premium will apply. A minimum deposit of 25% on all lots purchased is
required at the time of sale. All checks for deposits and balances due shall be payable
to the order of KOSTER INDUSTRIES INC. All bills must be paid to representatives of
the auctioneer at the plant unless otherwise announced. The full purchase price on
all lots to the same buyer must be paid within the time fixed and before removal of
any of the goods. Payments are accepted in the form of cash, cashiers check made
payable to KOSTER INDUSTRIES INC., wire transfer, or business check accompanied
by an approved bank letter of guarantee payable to KOSTER INDUSTRIES INC.
WIRE PROCESSING FACILITY
for Carbon, Alloy and Stainless Steel Wire
171 Central Avenue
Hillside, New Jersey 07205 USA
United States Bankruptcy Court District of New Jersey
Case No: 09-11467 (MS)
sale Date: Thursday, June 25th, 2009 at 10:30 a.m.
View of 4-Way Pointers
AUCTIONEERS • LIQUIDATORS • APPRAISERS
555 Broadhollow Road, Melville, New York 11747
(631) 454-1766 • Fax (631) 454-1779
Presorted
First-Class Mail
U.S. Postage
Inspection Dates: Wednesday, June 24th, 2009 from 8:00 a.m. to 4:00 p.m. and morning of sale
PAID
Minneapolis, MN
Permit #3723
2004
View of Die-Quip Die Polishers
Balloffet Mdl. BA-130
Ultrasonic Polisher
Tinius Olsen Tensile Tester
LAB & QUALITY CONTROL
Duriron Filter Press with 31 Plates
View of Lab & Inspection
2001
AXP/9050300
Tinius Olsen Tensile Tester, with Dell
computer
AUCTION SALE
[2] Tinius Olsen 60K Tensile Testers
Zumbach Type ODAC30.80 OD Inspection
Unit, S/N: 7396-0003
Shimadzu Type H Micro Hardness Tester,
S/N: 82592
Buehler Versamat 3 Metallograph
& Scope
Rockwell Wilson Mdl. 4JR-ARB
Hardness Tester, S/N: 8360
Leco Mdl. VP-160/HP-60 Lapper/
Polisher
Mettler Mdl. AK160 Digital Scale
Laser Mike 183 OD Tester
Buehler Surfmet I Belt Surfacer
Enco Mdl. 137-3178 Horizontal Bandsaw,
S/N: 470178
Miscellaneous in Machine Shop: Lincoln
Idealarc CV-300 Welder with LN-7 Wire
Feed; L-Tec Plasmarc PCM-70 Plasma
Cutter; Miller 330A/BP Welder; Long 12"
Disc & 6" Belt Sander; Tool Boxes, Welding
Supplies, Vises, Nuts & Bolts, Power Tools,
Drills, Taps, Electrical Parts, Etc.
FILTER PRESS & WATER
TREATMENT
Duriron 31-Plate Filter Press, with
32" x 32" Square Plates, Clarifier System
& Agitators
BOILER
Kewanee Mdl. L3S-300GO 300HP Gas
Fired Boiler, MWP 15-psig
MISCELLANEOUS MACHINERY
[2] 30HP Sullair Mdl. 10-30L Rotary
Screw Type Air Compressors,
S/Ns: 9578-NLF; 29083-TGF
Fume Scrubber System, with Hoods,
Pump, Controls, Etc.
FORKLIFTS & MANLIFT
[3] Shaw Box “Lif-Tech” 2 Ton Electric
Hoists, Mounted on Jibs
Eagle Mdl. 32/21JR 500# Capacity
Snorkel Lift, S/N: 13267
[2] Shaw Box 2 Ton 360 Degree Floor
Mounted Jib Cranes
5400# Hyster Mdl. S60XL2 Propane
Forklift, with 182" Reach, Forks, Hard
Tires, S/N: C187V161295
Assorted Carbon Steel Dip Tanks
Ribbon Blender, 5HP Motor, 48" Long x 24"
Wide x 22" Deep, with Bottom Discharge
5800# Hyster Mdl. H60XM Propane Lift,
with Pole Coil Attachment, 181" Reach,
Hard Tires, S/N: H177B52805B
Marley “Primus” Cooling Tower, with
Frick Evaporative Heat Transfer Unit
3500# Hyster Mdl. H60XL Propane
Forklift, with Forks, 187" Reach, Hard
Tires, S/N: C177B05186N
AIR COMPRESSORS
100HP Ingersoll Rand Mdl. SSR-EP100
Rotary Screw Type Air Compressor,
445-cfm, S/N: F15007095212
Large Quantity of Alloy and
Stainless Steel Wire
100HP Sullair Mdl. 20-100L Rotary Screw
Type Air Compressor, S/N: 003-61846
Can’t Attend the Auction?
Bid Online at www.bidspotter.com
5
Buehler Pneumet I Mounting Press
Leco Mdl. CM-15 Cut-Off Machine
MISCELLANEOUS
THROUGHOUT PLANT
Enormous Quantity of Heavy Duty Hi-Hats,
Strapping Machines, Fans, Self Dumping
Scrap Hoppers, Portable Wire Shears, Bench
Grinders, Pallet Jacks, Storage Cabinets,
Welding Equipment, Benches, Large Quantity
of Valves, [2] Club Car Electric Cars (as is),
Assorted Digital Platform Scales, Pumps &
Motors, Assorted Electrical Boxes & Control
Cabinets, Assorted 4' x 10' (Approx.) Flat
Plate Heat Exchangers, Etc.
Featuring: Sirio/M&E 24-Strand Annealing Line 2003
• Koch Wire Drawing Lines (new as 2001-2005) with
Spoolers, Dead Blocks • Bull Blocks • Inverted Vertical Bull
Blocks • Wire Straighteners & Cut-Offs • Bell Furnaces •
De-Scalers • Large Quantity of Wire Drawer Dies • Lab
Equipment & Tensile Testers • Plus Much More!!
WIRE PROCESSING FACILITY
for Carbon, Alloy and Stainless Steel Wire
Partial Views of
2003 Sirio/M&E
Annealing Line
171 Central Avenue
Hillside, New Jersey 07205 USA
United States Bankruptcy Court District of New Jersey
Case No: 09-11467 (MS)
Large
Quantity of Alloy
and Stainless Steel
Wire
Inspection Dates: Wednesday, June 24th, 2009 from 8:00 a.m. to 4:00 p.m. and morning of sale
Directions:
2003
Newark Liberty International Airport: Take U.S.-9/U.S.-1 ramp towards Rte. 21 – take Haynes
Ave. exit and proceed to Meeker Ave. and make right turn – go about ½ mile to Elizabeth Ave. and
turn left – this will turn into N. Broad Street, N. Broad will go to left, stay on N. Broad – proceed to
Central Ave. and turn right – about 20 minutes travel time.
Lewis Mdl. 11-F Wire Straightener & Cut-Off
JFK International: Take Belt Pkway. towards I-768/Van Wyck Expway. – Stay on Belt Pkway.
west towards Verrazano Bridge – take Exit 3 off Belt Pkway. and go over the Verrazano Bridge into
Staten Island – continue thru Staten Island on I-278 – take the Goethals Bridge into NJ and then
take I-95N after paying toll – proceed to exit 13A and merge onto NJ-81N towards U.S. 1&9 toward
Elizabeth/Trenton – go about ½ mile and turn right on North Ave. – go about 1 mile and then turn
right on N. Broad Street – go about 1 mile and turn left on Central Ave. – go about ½ mile to plant.
1992
1 of 2
Pickup truck
1988 GMC
Koch KGT 25/5 Wire Drawer Line
sale Date: Thursday, June 25th, 2009 at 10:30 a.m.
OFFICES
Wood Executive Desks & Credenzas, File
Cabinets, HP C5280 Printer, Flat Screen
Monitors, Conference Room, Office
Partitioning, Datamax Labelers, HP Laserjet
M1522NF Printer, Cloth Wood Chairs, Xerox
Work Centre M15I, Refrigerator, Kitchen
Table & Chairs, Folding Tables, Displays, HP
Officejet Pro L7580, Secretarial Chairs, High
Back Office Chairs, Etc.
Koch KGT 1600/2-1000/5 Wire Drawer Line
2004
EIWA Mdl. EK-610 Dead Blocks
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
Laguardia International Airport: Take Grand Central Pkway. East for about 5 miles and take
I-678S/Van Wyck Expway. – proceed to exit 1W (Belt Pkway.) west towards Verrazano Bridge/
Staten Island – take Belt Pkway. to Exit #3 and then follow directions from above.
Hotels
Hilton Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 908 351 3900
Sheraton Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 973 690 5500
Hampton Inn Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 908 355 0500
Lewis Mdl. 8-F Wire Straightener & Cut-Off
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
AUCTION SALE
171 Central Avenue
Hillside, New Jersey 07205 USA
United States Bankruptcy Court District of New Jersey
Case No: 09-11467 (MS)
1 of 3
2004
1991
1996
EIWA Mdl. ED-C-4 De-Scaler
Hakusan Mdl. BS-5T Heated
Pressure Welder
Featuring: Sirio/M&E 24-Strand Annealing Line 2003
• Koch Wire Drawing Lines (new as 2001-2005) with
Spoolers, Dead Blocks • Bull Blocks • Inverted Vertical Bull
Blocks • Wire Straighteners & Cut-Offs • Bell Furnaces •
De-Scalers • Large Quantity of Wire Drawer Dies • Lab
Equipment & Tensile Testers • Plus Much More!!
IMPORTANT NOTICE: Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as
to the accuracy of the information herein contained. It is for this reason that buyers
should avail themselves of the opportunity to make inspection prior to the sale.
Vaughn 6/7HR Wire Drawers
M&E Vertical Spooler
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: A 13%
buyer’s premium will apply. A minimum deposit of 25% on all lots purchased is
required at the time of sale. All checks for deposits and balances due shall be payable
to the order of KOSTER INDUSTRIES INC. All bills must be paid to representatives of
the auctioneer at the plant unless otherwise announced. The full purchase price on
all lots to the same buyer must be paid within the time fixed and before removal of
any of the goods. Payments are accepted in the form of cash, cashiers check made
payable to KOSTER INDUSTRIES INC., wire transfer, or business check accompanied
by an approved bank letter of guarantee payable to KOSTER INDUSTRIES INC.
WIRE PROCESSING FACILITY
for Carbon, Alloy and Stainless Steel Wire
171 Central Avenue
Hillside, New Jersey 07205 USA
United States Bankruptcy Court District of New Jersey
Case No: 09-11467 (MS)
sale Date: Thursday, June 25th, 2009 at 10:30 a.m.
View of 4-Way Pointers
AUCTIONEERS • LIQUIDATORS • APPRAISERS
555 Broadhollow Road, Melville, New York 11747
(631) 454-1766 • Fax (631) 454-1779
Presorted
First-Class Mail
U.S. Postage
Inspection Dates: Wednesday, June 24th, 2009 from 8:00 a.m. to 4:00 p.m. and morning of sale
PAID
Minneapolis, MN
Permit #3723
2004
View of Die-Quip Die Polishers
Balloffet Mdl. BA-130
Ultrasonic Polisher
Tinius Olsen Tensile Tester
LAB & QUALITY CONTROL
Duriron Filter Press with 31 Plates
View of Lab & Inspection
2001
AXP/9050300
Tinius Olsen Tensile Tester, with Dell
computer
AUCTION SALE
[2] Tinius Olsen 60K Tensile Testers
Zumbach Type ODAC30.80 OD Inspection
Unit, S/N: 7396-0003
Shimadzu Type H Micro Hardness Tester,
S/N: 82592
Buehler Versamat 3 Metallograph
& Scope
Rockwell Wilson Mdl. 4JR-ARB
Hardness Tester, S/N: 8360
Leco Mdl. VP-160/HP-60 Lapper/
Polisher
Mettler Mdl. AK160 Digital Scale
Laser Mike 183 OD Tester
Buehler Surfmet I Belt Surfacer
Enco Mdl. 137-3178 Horizontal Bandsaw,
S/N: 470178
Miscellaneous in Machine Shop: Lincoln
Idealarc CV-300 Welder with LN-7 Wire
Feed; L-Tec Plasmarc PCM-70 Plasma
Cutter; Miller 330A/BP Welder; Long 12"
Disc & 6" Belt Sander; Tool Boxes, Welding
Supplies, Vises, Nuts & Bolts, Power Tools,
Drills, Taps, Electrical Parts, Etc.
FILTER PRESS & WATER
TREATMENT
Duriron 31-Plate Filter Press, with
32" x 32" Square Plates, Clarifier System
& Agitators
BOILER
Kewanee Mdl. L3S-300GO 300HP Gas
Fired Boiler, MWP 15-psig
MISCELLANEOUS MACHINERY
[2] 30HP Sullair Mdl. 10-30L Rotary
Screw Type Air Compressors,
S/Ns: 9578-NLF; 29083-TGF
Fume Scrubber System, with Hoods,
Pump, Controls, Etc.
FORKLIFTS & MANLIFT
[3] Shaw Box “Lif-Tech” 2 Ton Electric
Hoists, Mounted on Jibs
Eagle Mdl. 32/21JR 500# Capacity
Snorkel Lift, S/N: 13267
[2] Shaw Box 2 Ton 360 Degree Floor
Mounted Jib Cranes
5400# Hyster Mdl. S60XL2 Propane
Forklift, with 182" Reach, Forks, Hard
Tires, S/N: C187V161295
Assorted Carbon Steel Dip Tanks
Ribbon Blender, 5HP Motor, 48" Long x 24"
Wide x 22" Deep, with Bottom Discharge
5800# Hyster Mdl. H60XM Propane Lift,
with Pole Coil Attachment, 181" Reach,
Hard Tires, S/N: H177B52805B
Marley “Primus” Cooling Tower, with
Frick Evaporative Heat Transfer Unit
3500# Hyster Mdl. H60XL Propane
Forklift, with Forks, 187" Reach, Hard
Tires, S/N: C177B05186N
AIR COMPRESSORS
100HP Ingersoll Rand Mdl. SSR-EP100
Rotary Screw Type Air Compressor,
445-cfm, S/N: F15007095212
Large Quantity of Alloy and
Stainless Steel Wire
100HP Sullair Mdl. 20-100L Rotary Screw
Type Air Compressor, S/N: 003-61846
Can’t Attend the Auction?
Bid Online at www.bidspotter.com
5
Buehler Pneumet I Mounting Press
Leco Mdl. CM-15 Cut-Off Machine
MISCELLANEOUS
THROUGHOUT PLANT
Enormous Quantity of Heavy Duty Hi-Hats,
Strapping Machines, Fans, Self Dumping
Scrap Hoppers, Portable Wire Shears, Bench
Grinders, Pallet Jacks, Storage Cabinets,
Welding Equipment, Benches, Large Quantity
of Valves, [2] Club Car Electric Cars (as is),
Assorted Digital Platform Scales, Pumps &
Motors, Assorted Electrical Boxes & Control
Cabinets, Assorted 4' x 10' (Approx.) Flat
Plate Heat Exchangers, Etc.
Featuring: Sirio/M&E 24-Strand Annealing Line 2003
• Koch Wire Drawing Lines (new as 2001-2005) with
Spoolers, Dead Blocks • Bull Blocks • Inverted Vertical Bull
Blocks • Wire Straighteners & Cut-Offs • Bell Furnaces •
De-Scalers • Large Quantity of Wire Drawer Dies • Lab
Equipment & Tensile Testers • Plus Much More!!
WIRE PROCESSING FACILITY
for Carbon, Alloy and Stainless Steel Wire
Partial Views of
2003 Sirio/M&E
Annealing Line
171 Central Avenue
Hillside, New Jersey 07205 USA
United States Bankruptcy Court District of New Jersey
Case No: 09-11467 (MS)
Large
Quantity of Alloy
and Stainless Steel
Wire
Inspection Dates: Wednesday, June 24th, 2009 from 8:00 a.m. to 4:00 p.m. and morning of sale
Directions:
2003
Newark Liberty International Airport: Take U.S.-9/U.S.-1 ramp towards Rte. 21 – take Haynes
Ave. exit and proceed to Meeker Ave. and make right turn – go about ½ mile to Elizabeth Ave. and
turn left – this will turn into N. Broad Street, N. Broad will go to left, stay on N. Broad – proceed to
Central Ave. and turn right – about 20 minutes travel time.
Lewis Mdl. 11-F Wire Straightener & Cut-Off
JFK International: Take Belt Pkway. towards I-768/Van Wyck Expway. – Stay on Belt Pkway.
west towards Verrazano Bridge – take Exit 3 off Belt Pkway. and go over the Verrazano Bridge into
Staten Island – continue thru Staten Island on I-278 – take the Goethals Bridge into NJ and then
take I-95N after paying toll – proceed to exit 13A and merge onto NJ-81N towards U.S. 1&9 toward
Elizabeth/Trenton – go about ½ mile and turn right on North Ave. – go about 1 mile and then turn
right on N. Broad Street – go about 1 mile and turn left on Central Ave. – go about ½ mile to plant.
1992
1 of 2
Pickup truck
1988 GMC
Koch KGT 25/5 Wire Drawer Line
sale Date: Thursday, June 25th, 2009 at 10:30 a.m.
OFFICES
Wood Executive Desks & Credenzas, File
Cabinets, HP C5280 Printer, Flat Screen
Monitors, Conference Room, Office
Partitioning, Datamax Labelers, HP Laserjet
M1522NF Printer, Cloth Wood Chairs, Xerox
Work Centre M15I, Refrigerator, Kitchen
Table & Chairs, Folding Tables, Displays, HP
Officejet Pro L7580, Secretarial Chairs, High
Back Office Chairs, Etc.
Koch KGT 1600/2-1000/5 Wire Drawer Line
2004
EIWA Mdl. EK-610 Dead Blocks
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
Laguardia International Airport: Take Grand Central Pkway. East for about 5 miles and take
I-678S/Van Wyck Expway. – proceed to exit 1W (Belt Pkway.) west towards Verrazano Bridge/
Staten Island – take Belt Pkway. to Exit #3 and then follow directions from above.
Hotels
Hilton Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 908 351 3900
Sheraton Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 973 690 5500
Hampton Inn Newark Liberty Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 908 355 0500
Lewis Mdl. 8-F Wire Straightener & Cut-Off
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673