Auto Dealership Solutions Guide

Transcription

2015 NADA CONVENTION & EXPO
Auto Dealership Solutions Guide
J A N U A RY 2 3 - 2 5 , 2 0 1 5
SAN FRANCISCO, CA
Auto Dealership Outdoor Lighting Applications
The appearance of a dealer’s product is as important as the service they provide. Evaluating a new site for a
dealership in the early stages of design will ensure the lighting layout highlights the beauty of the automobiles.
Each area of a site has a different flow of traffic whether it’s the customers, cars or a combination of both. Having
Customer Vehicle Delivery/Inspection
the right lighting option in the right location will make the area warm, safe and inviting. Because of this, our
The purchase is complete with a well lit area for the customer to
drive away in their new car. Outdoor canopy lighting, recessed
and surface-mount models are available in matching styles.
Additionally, wallpacks and accent lighting completes the
package.
lighting professionals can assist with the layout of the luminaires and provide a complete lighting analysis of the
space to ensure the best presentation. The modern car dealership has evolved and so has lighting it. Hubbell
Lighting fixtures provide the best solution for every area of the dealership. From the reception area to the vehicle
highlight, Hubbell Lighting has the fixtures to put your dealership “in the best light.”
Vehicle Inventory – Interior Rows
Matching luminaires to highlight the new car inventory.
Energy-efficient LED and traditional sources are available
to customize the dealership layout with light levels to
highlight inventory properly.
Interior Showroom/Offices
Service Area
A well lit interior and exterior service
area provides overall customer and
employee safety for your business.
Wallpacks in variety of sizes and
distributions are available to meet your
needs.
A full line of interior lighting is available for
illumination of interior showroom, offices and
customer waiting areas. Luminaires for these
areas include: troffers, recessed, parabolics and
architectural styled luminaires.
Outdoor Reception Area
An inviting entrance for customers requires accent
and highlight lighting. Bollards, low level floods,
landscape and wallpacks complete the package
and are available in matching styles and finishes.
Customer Parking
Lighting is inviting to customers,
adding to safety while keeping
them comfortable during their
shopping experience. A full-line of
luminaires in a variety of sizes and
shapes as well as matching poles
are available.
Signage & Flags
Accent lighting for dealerships includes: signs,
flag poles, ingrade and floodlighting. These
fixtures bringing a cohesive look to the dealership.
A variety of light source choices are available
including energy saving LED.
Vehicle Inventory – Front Row
Vehicle Highlight
Featured display of vehicles
require different applications of
light. Choose from flood, ingrade
and landscape lighting to highlight
these areas.
2
HUBBELL LIGHTING
Choose from the most complete line of luminaires
and poles designed to perform for dealership
lighting. Architectural die-cast, spun aluminum and
formed shapes are available to satisfy any design
requirement. Energy-efficent LED and traditional
HID systems available with choice of round or
square poles in steel or aluminum.
HUBBELL LIGHTING
3
Dealer Interior Lighting
Relight/Retrofit – Recessed/Troffers – Columbia/Prescolite
Kevin Whitaker Chevrolet – Greenville, SC
Hubbell Lighting offers a complete line of interior lighting solutions designed to accentuate
automobile color, curves and chrome, grabbing your customer’s interest. Selective lighting
inspires a warm and friendly atmosphere, naturally drawing customers to the sparkling
environment inside.
Showroom Lighting
Interior luminaires designed to highlight your automobiles and accent your showroom are available
in recessed, surface, pendant and track mounted styles for open, lay-in or hard ceilings. Lighting
for all office support functions is offered in similar styles. Hubbell Lighting brands offer the latest in
energy-efficient and high performance lighting systems.
Megalum
The industry’s first 12,000 lumen recessed
LED downlight. With multiple lumen
packages, reflector options, and color
temperatures, MegaLum illuminates any
area with ceiling heights from 20’ to 60’.
D2
Prescolite’s 2” LED collection is a full family
including downlight, wall wash and adjustable
fixtures - all designed to be used together in
architectural spaces.
LiteFrame LED
Prescolite’s 4”, 6” and 8” LiteFrame LED
offers a traditional downlight appearance
ideal for general lighting applications in the
professional market for offices, hospitality and
retail industries.
Office & Customer Lounge Areas
Hubbell Lighting brilliantly illuminates office and retail areas,
creating a pleasing atmosphere for daily functions. Choose from a
wide selection of luminaires in a variety of mounting styles, utilizing
the latest in energy efficient LED technology.
Service Bay & Maintenance Areas
Well lit service bays and prep areas are important to your overall
customer and staff satisfaction. A wide variety of high bay and low
bay luminaires are offered to meet the needs of this important area
of the dealership.
LSER - Serrano® LED
Cutting edge solid-state technology into an
architecturally styled luminaire. Perfect for
relight, retrofit or new construction, Serrano
LED delivers a powerful combination of
performance and energy savings.
LJT - Advanced LED Troffer
The LJT is a LED troffer designed for today’s
energy efficient construction market. Easy to
understand, LJT is a direct replacement for T8 and offers the right options for versatility of
use across a wide range of project types.
HBL LED Highbay
Designed for tough, service bay environments
the Hubbell Industrial LED Highbay offers a
customizable solution in an eco-smart, cost
effective package. Easy installation, WiHUBB™
and Dual-Lite® LiteGear® ready.
For complete Auto Dealership Lighting Solutions – please visit www.hubbelllighting.com
4
HUBBELL LIGHTING
HUBBELL LIGHTING
5
Case Study – Outdoor
BEFORE
HID
Relight/Retrofit – LED Floodlights & Luminaires - Hubbell Outdoor/ Spaulding
Kevin Whitaker Chevrolet – Greenville, SC
Project Challenge
Energy Savings: 62.6%
Serving the upstate of South Carolina, neighboring Georgia
and North Carolina communities for over 30 years, Kevin
Whitaker Chevrolet knows what it takes to earn business
and trust. But in an increasingly competitive market, it
is more critical than ever for auto dealerships to reduce
operating costs to increase earnings.
Prior to the retrofit, the dealership’s outdoor lighting
consumed 626,546 kWh annually. After the LED retrofit,
the electricity consumption fell to 234,183 kWh—or a
62.6% decline. When calculating that drop with a utility
rate of $0.10 per kWh, the dealership reduced its
electricity bills from $62,655 to an estimated $23,183—
an eye-opening $39,472 in just one year.
With the shift to LED technology creating a flood of new
lighting products on the market, it can be overwhelming to
narrow down and select the right lighting fixtures.
Hubbell Lighting’s Solutions
Working with Kevin Whitaker Chevrolet, the lighting
designers at Net Zero USA chose three different Hubbell
Lighting outdoor LED products to make the cars and
trucks’ paint truly pop. Over one hundred 1000 watt metal
halide fixtures at the top of existing poles were replaced
with 332 watt Spaulding Lighting Cimarron LED luminaires.
Forty-four 250 watt small metal halide floodlights located
halfway down some of the front line inventory poles were
swapped out with forty-four 70 watt Hubbell Outdoor
Lighting Miniliter LED floodlights. And a dozen 1000 watt
metal halide floodlights on the exterior of the building were
updated with fourteen 107 watt Hubbell Outdoor Lighting
Magnuliter LED floodlights.
Inside the showroom and office space, the dealership
chose products from Hubbell Lighting’s Columbia Lighting
and Prescolite brands to provide an inviting atmosphere for
customers and showcase vehicles in the showroom.
6
HUBBELL LIGHTING
Project Benefits
Lighting is an important part of the automotive shopping
experience, but also one of its greatest expenses,
accounting for more than 45% of a dealership’s energy
costs. Dealerships can increase earnings before taxes
up to 4% by upgrading their lighting while enhancing the
quality of light at their facilities.
AFTER
LED
From the Customer
“At Net Zero USA, we work to lower, or
even eliminate, costly electrical expenses.
The Spaulding Lighting Cimarron LED
fixtures provided the perfect product
to achieve both goals—bright, uniform
and eye-popping outdoor lighting and
significant energy and cost reductions.”
–Brian Lawrence, VP of Business
Development, Net Zero USA
“The lighting shows the cars far better at
night and folks driving by are giving our
inventory a second look. Also, the
brighter lights provide better security and
since they require less electricity, we run
them later into the night for even greater
peace of mind.”
$62,655
BEFORE
AFTER
$23,183
Electric Bills
Hubbell Lighting Products
• 65 Columbia Lighting – Stratus® E-Series Recessed
indirect troffers
• 18 Columbia Lighting – AW Low Profile wraparound
luminaires
• 8 Columbia Lighting – LHR Ultra-Efficient high bays
• 44 Hubbell Outdoor Lighting – Miniliter LED
floodlights (70W)
• 14 Hubbell Outdoor Lighting – Magnuliter LED
floodlights (107W)
• 111 Spaulding Lighting – Cimarron LED luminaires
(332W)
• 75 Prescolite – LB6LEDA LED downlights
–Kevin Whitaker, Owner
HUBBELL LIGHTING
7
LED Auto Dealership Optics
Spaulding Lighting and Beacon Products, leaders in auto dealership
lighting, are proud to offer high performance optics in the proven and
award winning Cimarron and Viper LED luminaires. The new optics provide
maximum illumination and performance for highlighting dealership
inventory and merchandising the “Front Row.” The modern car dealership
has evolved and so has the way you should illuminate it.
CONTROL
Thoughtful Design - End to End Control
Our integrated approach to solid-state lighting design is supported by a world
class team of mechanical, electrical and optical engineers working in harmony with
our NVLAP certified solid-state laboratories to maximize luminaire efficiencies and
minimize field maintenance assuring dependable performance and value.
Assuring the highest quality and value, Hubbell Lighting has the capability to
internally develop and manufacture virtually every element of the LED luminaire
short of the actual discrete LED, where we select only the highest quality LEDs
among the top component suppliers in the industry.
design . per formance . technology
ADVANTAGES OF LED AUTO OPTICS
Hubbell Lighting is able to maximize the light delivery to the task by offering two auto optics which deliver many
advantages over traditional lighting sources (shown below):
1A Optic - Front Row Auto Optic
2A Optic - Front & Interior Row Auto Optic
• Provides maximum illumination specifically targeting the front row display
• Tremendous “house side” cutoff behind the pole to maximize the impact of front row merchandise
•
Excellent front row illumination, while at the same time directing light towards
the second row of vehicles to increase vertical surface illumination
• Improved uniformity for drive lane and interior rows
Traditional Type IV Optic
•
Provides overall uniformity and light levels across the front row, drive lane, and across the second row of vehicles (lower light levels)
• Provides vertical illumination on the second row of vehicles
• Excellent lateral spread to increase pole spacing
LED Source Recommended Values
SSL – LED
Source
Front Row
8
HUBBELL LIGHTING
High Competition
Medium Competition
Low Competition
Pole
Height
Pole
Spacing
Fixture
Needed*
Target
Levels
Pole
Height
Pole
Spacing
Fixture
Needed*
Target
Levels
Pole
Height
Pole
Spacing
Fixture
Needed*
Target
Levels
20’-25’
20’-30’ on
centers
Twin 27,000
Lumen LED
75 FC
20’-25’
30’-40’ on
centers
Twin 27,000
Lumen LED
50 FC
20’-25’
65’-80’
Twin 27,000
Lumen LED
35 FC
Leading Edge Optics
Our custom designed optical
solutions are developed
to precisely control LED
illumination and provide
powerful consistent task
efficiency while minimizing
glare and optimizing uniformity.
Thermal Optimization
The maintenance benefits
provided by LED technology
are predicated on driving
heat away from LED and
power supply components.
Through the use of advanced
materials and computational
fluid dynamics (CFD) modeling,
Hubbell Lighting continues to
break the boundaries of light
output and luminaire life.
Quality
Our NVLAP certified labs
validate design performance
and subject new products to
robust reliability testing prior
to release. They establish the
benchmarks of quality control
that our operations teams use
in manufacturing. Every Hubbell
Lighting SSL luminaire is tested
in manufacturing and goes
through a dedicated burnin process that has resulted
miniscule defect rates that
support years of trouble-free
operation.
HUBBELL LIGHTING
9
ADVANTAGES
The Hubbell Advantage
Stay on the leading edge of technology by selecting from Hubbell
Lighting’s portfolio of solid-state lighting products.
Complete Solutions
From beautiful commercial environments to complex industrial applications, Hubbell Lighting
provides high performance solutions across virtually every industry application.
Area/ Site
Floodlighting
Wall
Bollards
Reducing Maintenance
Energy savings is only part of the story.
New Solid-state LED solutions from
Hubbell Lighting last up to 3 times
longer than Metal Halide or Fluorescent
sources and up to 60 times longer than
incandescent sources, dramatically
reducing maintenance costs.
LAMP TYPE
LIFE IN HOURS
REQUIRED RELAMPS vs. LED
Incandescent
1,000
60
Compact Fluorescent
10,000
6
Metal Halide
20,000
3
Linear Fluorescent
20,000
3
LED
60,000
0
Control In Application
Hubbell LED solutions provide instant restrike performance, that when combined
with factory integrated Hubbell controls, reduce energy usage by as much as
80% in application. It’s another innovative way we help meet fast evolving codes.
Area/ Site
Solar
Landscape
Pedestrian
Hubbell Wireless Lighting Controls
Having the lights on only when needed, saves money and helps our environment. Easy installation,
intuitive interfaces and web-based commissioning and monitoring make Hubbell Lighting the logical
choice for lighting control.
Energy Savings
By optimizing the LED, optics, drivers and controls into integrated fixture configurations, Hubbell
Lighting has broken the technology barriers to create cost effective, high performance LED luminaires
that can save up to 70% in applications, replacing less efficient technologies such as HID or fluorescent.
400
360w
69%
SAVINGS
300
200
110w
100
0
400-Watt Metal Halide
10
HUBBELL LIGHTING
Easy Install, Easy Maintenance
Hubbell LED luminaires are designed with
installation and maintenance ease in mind.
Our products offer easy access to electrical
components that will reduce installation time
and costs while making maintenance quick
and efficient.
Electronic Tracking
In the fast evolving LED space, component
performance upgrades are ongoing. To
provide best in class field support, we’re
integrating electronic tagging technology
across our product lines giving us a record
of all the spec details of your luminaire. Years
after installation a quick scan will reveal all of
the critical specification details our teams will
need to provide superior service and support.
Environmentally Friendly
With no mercury, like HID or fluorescent technologies,
Hubbell Lighting LED luminaries require no lamp recycling
and dramatically reduce CO2 emissions when replacing
legacy technologies.
Rebate Program Approved
Utility rebate programs, where available usually require products
to be Design Lights Consortium or Energy Star qualified.
Hubbell Lighting maintains one of the more extensive collections
of DLC and Energy Star qualified products available to reduce
project costs and quicken payback. For a complete listing,
visit hubbelllighting.com/solutions/retrofit/
LED
HUBBELL LIGHTING
11
OUTDOOR SITE
FLOODLIGHTING
ARCEOS
53%
VIPER
ENERGY SAVINGS
53%
58%
ENERGY SAVINGS
53 %
ENERGY SAVINGS
ENERGY SAVINGS
ALTITUDE
12
ALPHA
400 Watt MH Area Light
VP-L-96NB-220
1000 Watt MH Area Light
ALT-5P70240L
400 Watt MH Flood
ARF4-K-84L5K-070-W
400 Watt MH Flood
AL-D-72NB-220-5K-6x6
465W
220W
1160W
556W
465W
200W
465W
220W
20,000 Hour Life
60,000 Hour Life
20,000 Hour Life
60,000 Hour Life
20,000 Hour Life
60,000 Hour Life
20,000 Hour Life
60,000 Hour Life
Replace Every 4.6 years
HUBBELL LIGHTING
Energy Savings 245W
Annual Savings $118
Lifetime Savings $1,617
Energy Savings 604W
Annual Savings $291
Energy Savings 265W
Annual Savings $119
Energy Savings 245W
Annual Savings $118
Based on $.11 per KWH and 4,380 burn hours annually
HUBBELL LIGHTING
13
WALL LIGHTING
PARKING GARAGE & CANOPY
LNC
82%
72%
ENERGY SAVINGS
LNC-7LU
175 Watt MH Parking Garage
LXEM4-HL
94W
17W
213W
60W
10,000 Hour Life
60,000 Hour Life
10,000 Hour Life
60,000 Hour Life
Replace Every 6 years
Energy Savings 77W
Annual Savings $34
Lifetime Savings $464
Energy Savings 153W
Annual Savings $67
LMC-30LU
79%
175 Watt Wall Pack
14
WATT REDUCTION
70 Watt Wall Pack
LNC2
71%
ENERGY SAVINGS
250 Watt MH Flood
NRG
ARCEOS
60%
ENERGY SAVINGS
LNC2-18LU
LXEM
67%
WATT REDUCTION
LNC-30LU
WATT REDUCTION
ARS-36L
NRG4-30LU
213W
45W
290W
71W
213W
86W
213W
70W
10,000 Hour Life
60,000 Hour Life
20,000 Hour Life
60,000 Hour Life
10,000 Hour Life
60,000 Hour Life
10,000 Hour Life
60,000 Hour Life
HUBBELL LIGHTING
Energy Savings 168W
Annual Savings $74
Energy Savings 219W
Annual Savings $117
Energy Savings 127W
Annual Savings $56
Energy Savings 143W
Annual Savings $63
Based on $.11 per KWH and 8,736burn hours annually
HUBBELL LIGHTING
15
POST-TOP
LIGHTING
UNIVERSE
65%
Auto Dealership Lighting
65%
WATT REDUCTION
WATT REDUCTION
PROVIDENCE
16
175 Watt MH Post Top
PROV
175 Watt MH Post Top
UCM-LK
213W
75W
213W
75W
10,000 Hour Life
60,000 Hour Life
10,000 Hour Life
60,000 Hour Life
HUBBELL LIGHTING
Energy Savings 138W
Annual Savings $66
Energy Savings 138W
Annual Savings $66
HUBBELL LIGHTING
17
CONTROLS
Here’s a lights out
solution for lighting.
HUBBELL WIRELESS LIGHTING CONTROLS
Having lights on only when needed, saves money and helps our environment. Easy installation, intuitive interfaces and web-based
commissioning and monitoring make Hubbell Lighting the logical choice for lighting control.
HBA
HBA
HBA
BEACON
wiSTAR™
wiHUBB®
wiSCAPE™
Beaconnect
Outdoor Applications
Building Lighting Control (wall packs, etc)
Building Area and Parking Lot Control
Stand Alone Parking Lot Control
Street Lighting Control
Built-In Fixture Enabled Controls
Built-in Fixture Enabled Controls (Beacon)
Built-in Fixture Enabled Controls (Fixture Agnostic)
Fixture Built-in Daylighting Control
Fixture Built-in Occupancy Control
Fixture Built-in Dry Contact Inputs/Outputs
Additional Control Components
Stand-alone Relay Module
Stand-alone Relay and Dimming Module (0-10V)
Stand-alone Occupancy/Motion Sensing
Stand-alone Daylighting Control
Wall Switch Overrides
System Features
Control of Individual Fixtures
Control of Fixture Groups
Remote Access (internet)
System Reporting
Real-time Monitoring
Power Metering
Alarms and Notifications
Building Management Integration
Shipped Pre-commissioned with One-step Setup
CONTROLS
On-board LED Thermal Regulation
18
HUBBELL LIGHTING
HUBBELL LIGHTING
19
CONTROLS
CONTROLS
WASP2™ AND DIMMING WASP™
wiHUBB® WIRELESS LIGHTING CONTROL TECHNOLOGY
Indoor and outdoor occupancy and photocell sensors for on/off or preset dimmed
Secure peer-to-peer, self-organizing, self-healing indoor/outdoor mesh network utilizing
- Fixture modules
- Occupancy/vacancy sensors
- Daylight harvesting sensors
- Switch stations
WASP2 Occupancy and Photocell Sensor
•
•
•
•
•
wiHUBB SMART PACK
Intelligently and automatically responds to sensors and switches
Digital Passive Infrared (PIR) sensor
Multiple (single and dual) output versions
Unique Smart Cycling™ for improved fluorescent lamp life
Interchangeable high/low mount detection lens options
Low voltage and line voltage models available
DIMMING WASP Outdoor Motion and Photocell Sensor
• Single or dual relay versions for on/off or high/low control
• Optional 0–10V interface for full range dimming control
• Mounting heights: high mount lens: 30 ft outdoors; 45 ft indoors:
low mount lens: 16 ft indoors/outdoors
• Controls 0-10V, 2-wire dimmable ballasts
• User controlled dimming with high/low area detection options
• Low temperature /water-tight/indoor-outdoor
wiHUBB OCCUPANCY SENSOR
Dual-technology occupancy sensing with 360° detection coverage
• 2,000 square-foot coverage area
• IntelliDAPT ® self-adaptive technology—no manual adjustment required
• CAT5 plug-and-play integration with wiHUBB Smart Pack
design . per formance . technology
BEACONNECT WIRELESS CONTROL
Plug and Play Built-in Wireless Module
•
•
•
•
•
AVAILABLE Q3 2014
Plug-in USB drive for easy modification
User-defined dimming schedules
Battery back-up system for on-board luminaire clock
Supports motion control and daylight harvesting for advanced dimming
Install fixtures pre-commissioned from the factory
wiSCAPE™ WIRELESS STREET LIGHTING CONTROLS
Enables utilities and municipalities to manage, monitor and meter individual streetlights
wiSCAPE GATEWAY ACCESS POINT
wiSCAPE Gateway Access Point
•
•
•
•
•
Module/gateway ratio:1000 modules per gateway
Gateways are in NEMA 4X (IP66) cabinets
Fail-safe operation- defaults to photocell control
Data storage supports up to six months of rolling data storage
128-bit AES encryption
wiSCAPE FIXTURE MODULE
Relay/0-10V Dimming with Metering Standard Radio
•
•
•
•
•
•
•
20
HUBBELL LIGHTING
Switch 3 amp loads (120, 208, 277 and 347VAC) or 6 amp loads (480VAC)
Inputs for low-voltage switch, motion and photo sensor
Outputs 0-10V for dimming ballasts (sink+source)
Dry contact output for driving external contactors
Bi-directional wireless RF mesh communications
Individual addresses of unique serial numbers
480V fixture module available in NEMA4X enclosure
HUBBELL LIGHTING
21
AL
CDT
Cadet
Alpha
FEATURES
FEATURES
•
The Alpha Luminaire is a high performance “LED”
energy and maintenance lighting solution,
designed with optical versatility.
•
The housing, electrical compartment and fitter are
made from die cast aluminum that is pre-treated
and powder-coated to meet the most rugged
industry standards.
•
•
The adjustable knuckle is designed to slip fit 2⅜"
to 3" O.D. tenon.
The fixture electrical compartment shall contain
all LED driver components and shall be provided
with an internal terminal block for AC power
connections.
•
The Alpha luminaire provides the best
combination of vertical and horizontal
illumination while reducing light behind the
poles.
•
Luminaires are equipped with an LED driver that
accepts 100V through 277V, 50 Hz to 60 Hz (UNV),
or a driver that accepts 347V or 480V input.
•
A thermal circuit, LIFESHIELD™, shall protect
the luminaire from excessive temperature by
interfacing with the 0-10V dimmable drivers to
reduce drive current as necessary.
ORDERING INFORMATION
FEATURES
•
•
The Cadet Luminaire is a high performance LED
energy and maintenance lighting solution,
designed with optical versatility. Markets Include:
Flags, Columns, Statues, Security, Building Floodlighting, Landscapes. The Cadet LED Luminaire
is intended to be used to reduce energy and
maintenance associated with legacy HID lighting
technology.
The housing and electrical compartment are
made from die cast aluminum that is pre-treated
and powder-coated to meet the most rugged
industry standards. The finish is corrosion
resistant to meet ASTM B-117, resists cracking or
loss of adhesion per ASTM D522, resists surface
impacts of up to 160 inch-pound. All external
hardware is corrosion resistant.
•
•
The Luminaire shall bear a CSA label and be
marked suitable for wet locations.
–
–
MODEL
AL-D Down (below
horizon)
AL-U Up (above
horizon)
–
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
CCT-COLOR TEMP
5K 5000º K (std.)
4K 4000º K
3K 3000º K
ENGINE-WATTS
24NB-55 55 Watts
36NB-80 80 Watts
60NB-136 136 Watts
72NB-170 170 Watts
72NB-220 220 Watts
–
BEAM (10% MAX.)
2×2 Narrow Spot
4×4 Narrow Flood
5×5 Medium Flood
6×6 Wide Flood
5×3 Horizontal Flood
3×5 Vertical Flood
–
–
MOUNTING OPTIONS
WM Wall Mount
PM 3" Pier Mount
STANDARD MOUNTING
SF3 23/8" OD Tenon
–
CDT
SHIELD OPTIONS
FL Full Louver
FV Full Visor
HL Half Louver
HV Half Visor
PCL Protective Lens 4
COLOR
BBT Basic Black Textured
BMT Black Matte Textured
WHT White Textured
MBT Metallic Bronze Textured
BZT Bronze Textured
DBT Dark Bronze Textured
GYS Gray Smooth
DPS Dark Platinum Smooth
GNT Green Textured
MST Metallic Silver Textured
MTT Metallic Titanium Textured
OWI Old World Iron
RAL
ELECTRICAL OPTIONS
PEC Photobutton Control
PCR-TL Photocell, Twist-lock
PCR-SC Photocell, Shorting Cap
2PF Dual Power Feed 1, 2
STANDARD ELECTRICAL OPTIONS
Lifeshield™ Thermal Protection
20K-Surge Protection 3
Dimming Drivers
Available 24NB-55, 72NB-170, and 72NB-220 only
Not available @ 347/480V input
Not available @ 347V input
4
Required for AL-U
1
2
3
20”
DETAILS
9.334
13"
16.371
MODEL
CDT Cadet
–
24NB-55
–
CCT-COLOR TEMP
5K 5000º K (std.)
4K 4000º K
3K 3000º K
ENGINE-WATTS
24NB-55 55 Watts
–
–
2×2
4×4
5×5
6×6
5×3
3×5
–
–
VOLTAGE
UNV 120-277V
YK
AJ
BX
WA
GS
PA
TS
12NA
34NA
–
ACCESSORIES
HV Half Visor
FV Full Visor
MOUNTING OPTIONS
Yoke Mount (std.)
Architectural Junction Box
Brass Junction Box
Wall & Ceiling Adaptor
Ground Stake
Cast Post-Top Adaptor
Tree Strap
½" NPT Adaptor (std.)
¾" NPT Adaptor (std.)
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
COLOR
Basic Black Textured
Black Matte Textured
White Textured
Metallic Bronze Textured
Bronze Textured
Dark Bronze Textured
Gray Smooth
Dark Platinum Smooth
Green Textured
Metallic Silver Textured
Metallic Titanium Textured
Old World Iron
DETAILS
9 3/8”
7 1/2”
Wall Mount (WM)
OPTICS
Narrow Spot
Narrow Flood
Medium Flood
Wide Flood
Horizontal Flood
Vertical Flood
UNV
14 1/2"
11.625
14.600
26 1/2"
12 1/4”
11 5/8”
Ø7 1/4"
Standard SF3 mount
Slips 2 3/8" to 3" O.D. Tenon
Full Louver
Full Visor
Half Louver
Half Visor
Front
Side
Top
EPA: 1.32 ft 2
WEIGHT: 27 lbs.
22
HUBBELL LIGHTING
HUBBELL LIGHTING
23
SLD
MET-30
Metropolis
Slide
FEATURES
•
•
•
•
FEATURES
The Beacon Metropolis roadway luminaire is a
pole mounted luminaire with a LED light engine
& optical bezel system.
The Beacon Metropolis luminaire consists of a
die cast aluminum two-piece housing with a
polycarbonate lens.
Luminaires are equipped with LED driver(s) that
accept 90 through 305 VAC, 50 Hz to 60 Hz
(UNIV).
The onboard surge protector shall be a UL
recognized component for the United States
and Canada and have a surge current rating of
20,000 Amps using the industry standard 8/20
pSec wave.
•
•
•
•
Each luminaire is supplied with an optical one
piece cartridge system consisting of an LED
engine, LED lamps, optics, gasket and stainless
steel bezel.
The luminaire shall bear an NRTL label and be
•
All cast aluminum parts for the Beacon Slide
luminaire shall be ASTM 356 marine grade alloy.
The large upper shade shall be made from a onepiece aluminum spinning. The small top shade
shall be removable for wiring access to the LED
engine. The large upper shade provides directheat exchange between the LED light engine and
the cool outdoor air.
•
Luminaires are equipped with an LED driver
that accepts 100V through 277V, 50 Hz to 60 Hz
(UNIV), or a driver that accepts 347V or 480V
input. Power factor is .92 at full load.
•
The luminaire shall bear a CSA label and be
•
Each Beacon Slide luminaire is supplied with an
Optical one piece cartridge system consisting of an
LED engine, LED lamps, optics, gasket and stamped
stainless steel bezel.
MET30
–
–
MODEL
MET 30 Metropolis
PC
NL
–
CCT-COLOR TEMP
5K 5000º K (std.)
4K 4000º K
3K 3000º K
ENGINE-WATTS
24NB-55 55 Watts
36NB-80 80 Watts
48NB-110 110 Watts
60NB-136 136 Watts
LENS OPTIONS
polycarbonate
clear
no lens
–
OPTICS
DIR2 Type II
DIR3 Type III
DIR4 Type IV
DIR5 Type V
–
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
–
SHA
DPF
DEF
AM
ELECTRICAL OPTIONS
(specify voltage)
20K-Surge Protection
Dimming Drivers
SLD
–
STYLE OPTIONS
spun aluminum shade
decorative finial for
twist-lock photocell
decorative finial
Arm Mount
COLOR
BBT Basic Black Textured
BMT Black Matte Textured
WHT White Textured
MBT Metallic Bronze Textured
BZT Bronze Textured
DBT Dark Bronze Textured
GYS Gray Smooth
DPS Dark Platinum Smooth
GNT Green Textured
MST Metallic Silver Textured
MTT Metallic Titanium Textured
OWI Old World Iron
RAL
–
MODEL
SLD Slide
–
ENGINE-WATTS
24NB-27 27 Watts
24NB-55 55 Watts
36NB-80 80 Watts 1
48NB-110 110 Watts 1
LENS OPTIONS
NN No Lens
4
5
1
2
3
–
CCT-COLOR TEMP
5K 5000º K (std.)
4K 4000º K
3K 3000º K
–
T2
T3
T4
T5R
T5QM
T5W
–
OPTICS
Type II
Type III
Type IV
Rectangular
Sq. Medium
Round Wide
–
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
–
–
TOP
FLT Flat Top
ELECTRICAL OPTIONS
PEC Button Photocell (specify voltage)
2PF Dual Power Feed 3
Dimming Drivers
Not available with lens option
24NB-55 max
Requires lens
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
SHADE
FTS Flat
STS Slope
CTS Curved
COLOR
White Textured
Bronze Textured
Gray Smooth
Green Textured
Old World Iron
DETAILS
25 1/2”
24 1/4”
25 1/2”
24 1/4”
26 3/5”
24 1/4”
25 1/2”
25 1/2”
dome top
Shown with clear PC lens
25 1/2”
25 1/2”
Shown with 55-136W
LED engine
27 15/16”
27 15/16”
27 15/16”
26 1/2”
dome top / sloped shade
24
HUBBELL LIGHTING
dome top / curved shade
HUBBELL LIGHTING
25
CAP, MRSS, MRDS, MAR
T1
Mediterranean
Urban (Large)
FEATURES
FEATURES
•
The drivers shall be located in the top cast housing
and shall be accessible without tools by hinging the
lower shade assembly. The driver and all electrical
components shall be on a tray. The lower shade shall
be made from a one-piece aluminum spinning.
•
Each Beacon luminaire is supplied with an Optical
one piece cartridge system consisting of an LED
steel bezel.
•
The onboard surge protector shall be UL
recognized component for the United States and
Canada with surge current rating of 10,000 Amps
using the industry standard 8/20 pSec wave.
•
•
The luminaire shall bear a CSA label and be
•
–
MRDS-26
MAR-26
•
•
The heavy spun aluminum dome shall be topped
with a decorative cast aluminum finial (except
Brighton). The dome shall be mechanically
attached to the lens. The acrylic lens material
shall be UV stabilized and impact resistant.
An LED Bezel, is a one piece cartridge with, LEDs,
optics, gasket and stainless steel face-plate. A
thermal circuit, called LIFESHIELD™, shall protect
CAP-26
MRSS-26
The Village series is a unique collection of
traditional acorn style luminaires that set the
architectural tone for many of our cities today.
This luminaire is made up of fully interchangeable
components. For specification, select a MODEL,
a LENS OPTION, followed by a CAGE, and
finally a HOUSING, and finish with the lighting
performance details specific to your project
requirements.
All cast aluminum components shall be low copper
alloy A356. All extruded aluminum components
shall be alloy 6061-T6, 6063-T5 or equal. All spun
components shall be alloy 1070, 3002 or 1100.
•
–
MODEL
Capitol 26
Miramar Shallow
Shade 26
Miramar Deep
Shade 26
Maritas 26
–
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
CCT-COLOR TEMP
5K 5000º K (std.)
4K 4000º K
3K 3000º K
ENGINE-WATTS
24NB-27 27 Watts
24NB-55 55 Watts
36NB-80 80 Watts
48NB-110 110 Watts
60NB-136 136 Watts
–
OPTICS
T2 Type II
T3 Type III
T4 Type IV
T5R Rectangular
T5QM Sq. Medium
T5W Round Wide
–
T1
–
MOUNTING OPTIONS
NRNW No Rings
3RNW Three Cast
Rings
ELECTRICAL OPTIONS
PEC Button Photocell (specify voltage)
Dimming Drivers
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
–
–
MODEL
T1 Mediterranean
COLOR
White Textured
Bronze Textured
Gray Smooth
Green Textured
Old World Iron
Not available 24NB-27
–
LENS OPTIONS
AC Acrylic, Clear
AF Acrylic, Frosted
H1
H2
H3
H4
H5
C1
C2
C3
C4
C5
NC
–
–
HOUSING
Mediterranean
London
Monaco
Park Lane
Brighton
CAGE
Mediterranean
London
Monaco
Park Lane
Brighton
No Cage 1
CCT-COLOR
TEMP
3K 3000º K
4K 4000º K
5K 5000º K
SOURCE
24NB-55 55 Watts
36NB-80 80 Watts
48NB-110 110 Watts
–
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
–
OPTICS
DIR2 Type II
DIR3 Type III
DIR4 Type IV
DIR5 Type V
ELECTRICAL OPTIONS
PEC Photocell, Button
PCR-TL Photocell, Twist-lock 2
PCR-SC Photocell, Shorting Cap 2
–
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
COLOR
White Textured
Bronze Textured
Gray Smooth
Green Textured
Old World Iron
1
55 Watts max
H2 only
2
1
3
2
DETAILS
DETAILS
CAP
MAR
21” - CAP
26” - CAP
21” - MAR
H: 18.75"
EPA: 1.04 ft
35 lbs
H: 21.75"
EPA: 1.39 ft
40 lbs
H: 18.9"
EPA: 1.00 ft
35 lbs
2
2
HUBBELL LIGHTING
H: 21.3"
EPA: 1.25 ft
40 lbs
2
MRSS
21” - MRDS
26” - MRDS
H: 17.9"
EPA: 1.00 ft
35 lbs
H: 21"
EPA: 1.25 ft
40 lbs
2
26” - MRSS
2
shown with optional 3RNW rings
26
2
MRDS
26” - MAR
H: 18"
EPA: 1.17 ft
40 lbs
2
HUBBELL LIGHTING
27
T2
T5
London
Brighton
FEATURES
•
•
FEATURES
components. Specify a MODEL, a LENS OPTION,
followed by a CAGE, and finally a HOUSING, and
finish with the lighting performance details
specific to project requirements.
All cast aluminum components shall be low
copper alloy A356. All extruded aluminum
components shall be alloy 6061-T6, 6063-T5 or
equal. All spun components shall be alloy 1070,
3002 or 1100.
•
•
T2
–
55 Watts max
H2 only
–
–
H1
H2
H3
H4
H5
C1
C2
C3
C4
C5
NC
–
–
HOUSING
Mediterranean
London
Monaco
Park Lane
Brighton
CAGE
Mediterranean
London
Monaco
Park Lane
Brighton
No Cage 1
CCT-COLOR
TEMP
3K 3000º K
4K 4000º K
5K 5000º K
SOURCE
24NB-55 55 Watts
36NB-80 80 Watts
48NB-110 110 Watts
–
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
–
OPTICS
DIR2 Type II
DIR3 Type III
DIR4 Type IV
DIR5 Type V
ELECTRICAL OPTIONS
T5
–
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
COLOR
White Textured
Bronze Textured
Gray Smooth
Green Textured
Old World Iron
LENS OPTIONS
AC Acrylic, Clear
AF Acrylic, Frosted
1
2
2
HUBBELL LIGHTING
–
–
–
MODEL
T5 Brighton
1
DETAILS
28
•
3002 or 1100.
•
•
MODEL
T2 London
LENS OPTIONS
AC Acrylic, Clear
AF Acrylic, Frosted
•
H1
H2
H3
H4
H5
C1
C2
C3
C4
C5
NC
–
–
HOUSING
Mediterranean
London
Monaco
Park Lane
Brighton
CAGE
Mediterranean
London
Monaco
Park Lane
Brighton
No Cage 1
CCT-COLOR
TEMP
3K 3000º K
4K 4000º K
5K 5000º K
SOURCE
24NB-55 55 Watts
36NB-80 80 Watts
48NB-110 110 Watts
–
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
–
OPTICS
DIR2 Type II
DIR3 Type III
DIR4 Type IV
DIR5 Type V
ELECTRICAL OPTIONS
–
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
COLOR
White Textured
Bronze Textured
Gray Smooth
Green Textured
Old World Iron
55 Watts max
H2 only
DETAILS
HUBBELL LIGHTING
29
T4
T3
Park Lane
Monaco
FEATURES
FEATURES
•
•
3002 or 1100.
•
•
–
–
–
MODEL
T3 Monaco
LENS OPTIONS
AC Acrylic, Clear
AF Acrylic, Frosted
H1
H2
H3
H4
H5
C1
C2
C3
C4
C5
NC
–
–
HOUSING
Mediterranean
London
Monaco
Park Lane
Brighton
CAGE
Mediterranean
London
Monaco
Park Lane
Brighton
No Cage 1
CCT-COLOR
TEMP
3K 3000º K
4K 4000º K
5K 5000º K
SOURCE
24NB-55 55 Watts
36NB-80 80 Watts
48NB-110 110 Watts
–
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
–
OPTICS
DIR2 Type II
DIR3 Type III
DIR4 Type IV
DIR5 Type V
ELECTRICAL OPTIONS
T4
–
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
LENS OPTIONS
AC Acrylic, Clear
AF Acrylic, Frosted
2
HUBBELL LIGHTING
•
•
–
–
H1
H2
H3
H4
H5
C1
C2
C3
C4
C5
NC
–
–
HOUSING
Mediterranean
London
Monaco
Park Lane
Brighton
CAGE
Mediterranean
London
Monaco
Park Lane
Brighton
No Cage 1
CCT-COLOR
TEMP
3K 3000º K
4K 4000º K
5K 5000º K
SOURCE
24NB-55 55 Watts
36NB-80 80 Watts
48NB-110 110 Watts
–
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
–
OPTICS
DIR2 Type II
DIR3 Type III
DIR4 Type IV
DIR5 Type V
ELECTRICAL OPTIONS
–
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
COLOR
White Textured
Bronze Textured
Gray Smooth
Green Textured
Old World Iron
55 Watts max
H2 only
1
2
DETAILS
–
MODEL
T5 Park Lane
COLOR
White Textured
Bronze Textured
Gray Smooth
Green Textured
Old World Iron
1
55 Watts max
H2 only
30
•
traditional acorn style luminaires that set
the architectural tone for many of our cities
today. This luminaire is made up of fully
interchangeable components. Specify a MODEL,
then a LENS OPTION, followed by a CAGE,
and finally a HOUSING, and finish with the
lighting performance details specific to project
requirements.
All cast aluminum components shall be low copper
alloy A356. All extruded aluminum components
shall be alloy 6061-T6, 6063-T5 or equal. All spun
components shall be alloy 1070, 3002 or 1100.
T3
•
DETAILS
HUBBELL LIGHTING
31
VP-S
VP-L
Viper (Small)
Viper (Large)
FEATURES
•
FEATURES
The Beacon Viper luminaire is available in two
sizes with a wide choice of different LED wattage
configurations and optical distributions designed
to replace HID lighting up to 1000W MH or
HPS and with 5 different mounting options for
application in a wide variety of new and existing
installations.
Each Viper luminaire is supplied with an one piece
optical cartridge system consisting of an LED
steel bezel.
•
•
Aluminum thermal clad board with 0.062" thick
aluminum base layer, thermally conductive
dielectric layer, 0.0014" thick copper circuit
layer circuit layer designed with copper pours to
minimize thermal impedance across dielectric.
VP-S
–
MODEL
VP-S Viper (Small)
2
3
•
The Beacon Viper luminaire is available in two
sizes with a wide choice of different LED wattage
configurations and optical distributions designed to replace HID lighting up to 1000W MH
or HPS and with 5 different mounting options for
application in a wide variety of new and existing
installations. Luminaires are suitable for wet
locations.
•
•
Aluminum thermal clad board with 0.062" thick
aluminum base layer, thermally conductive
dielectric layer, 0.0014" thick copper circuit
layer circuit layer designed with copper pours to
minimize thermal impedance across dielectric.
Each Viper luminaire is supplied with an one piece
optical cartridge system consisting of an LED
steel bezel.
–
–
–
T2
T3
T4
T5R
T5QM
T5W
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
CCT-COLOR TEMP
5K 5000º K (std.)
4K 4000º K
3K 3000º K
ENGINE-WATTS
22NB-50 50 Watts
22NB-70 70 Watts
30NB-70 70 Watts
30NB-90 90 Watts
1
•
OPTICS
Type II
Type III
Type IV
Rectangular
Sq. Medium
Round Wide
–
VP-L
–
MOUNTING OPTIONS
RA Rectangular Arm
SF2 23/8" OD Slipfitter
PK2 23/8" Adjustable
Knuckle
WB Wall Bracket
ELECTRICAL OPTIONS
Dimming Drivers
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
COLOR
White Textured
Bronze Textured
Gray Smooth
Green Textured
Old World Iron
–
MODEL
VP-L Viper (Large)
–
–
2
3
–
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
CCT-COLOR TEMP
5K 5000º K (std.)
4K 4000º K
3K 3000º K
ENGINE-WATTS
64NB-135 135 Watts
64NB-190 190 Watts
80NB-180 180 Watts
80NB-235 235 Watts
96NB-220 220 Watts
96NB-280 280 Watts
1
DETAILS
T2
T3
T4
T5R
T5QM
T5W
OPTICS
Type II
Type III
Type IV
Rectangular
Sq. Medium
Round Wide
–
MOUNTING OPTIONS
RA Rectangular Arm
SF2 23/8" OD Slipfitter
PK2 23/8" Adjustable
Knuckle
WB Wall Bracket
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
COLOR
White Textured
Bronze Textured
Gray Smooth
Green Textured
Old World Iron
29 1/8"
29 (LG
1/8”VIPER)
22 3/4”
24 3/16"
(LG VIPER)
24 3/16”
Acceptss 2 3/8” OD
tenon, m
min 4” long.
S F2
RA rectangular arm
14 1/4"
(LG VIPER)
14 1/4”
11 1/4”
RA rectangular arm
A
Accepts
2 3/8” OD
tenon, min 4” long.
S F2
7
Drill pattern
7
4”
Suggested Distance
From Top of Pole
1.25”
Ø7 3/8
O.D.
2.50”
Ø7 1/4
Ø5/8”
Ø7 3/8
O.D.
Ø5/8”
WB wall bracket
rectangular arm
Front View
Front View
6 5/8”
Ø4 Pole
Ø5 Pole
Ø6 Pole
6 5/8”
4 1/8"
1/8”
26 1/4”
weight: 25lbs
18 3/4”
Ø7 1/4
WB wall bracket
2X Ø5/16”
rectangular arm
epa: 0.67 ft 2
1.25”
2.50”
2X Ø5/16”
4 1/8”
5 1/2
Drill pattern
5 1/2
4”
Suggested Distance
From Top of Pole
HUBBELL LIGHTING
–
details
DETAILS
weight: 15lbs
–
ELECTRICAL OPTIONS
Dimming Drivers
16 3/4”
32
S I T E / R OA D WAY
S I T E / R OA D WAY
•
epa: 1 ft 2
Ø4 Pole
Ø5 Pole
Ø6 Pole
PK2 2-3/8” adjustable knuckle
PK2 2-3/8” adjustable knuckle
HUBBELL LIGHTING
33
EDR
ARS
Endura
Surface/Ceiling/Garage Luminaire
FEATURES
G A R AG E / C A N O P Y
•
•
•
•
The Beacon EDR luminaire is a ceiling surface
mounted or pendant mounted parking structure
luminaire with a field replaceable LED lightengine & optical bezel system.
The Beacon EDR luminaire consists of a die cast
aluminum two-piece housing.
The top housing is designed with various bolt
patterns for mounting to a recessed, surface or
rigid-pendant hung 4" junction box junction box
and rigid stem provided by others).
Each Endura luminaire is supplied with an Optical
one piece cartridge system consisting of an LED
•
•
steel bezel.
Luminaires are equipped with an LED driver
that accepts 100V through 277V, 50 Hz to 60 Hz
(UNIV), or a driver that accepts 347V or 480V
input.
•
•
EDR
–
–
–
CCT-COLOR TEMP
5K 5000º K (std.)
4K 4000º K
3K 3000º K
ENGINE-WATTS
24NB-27 27 Watts
24NB-55 55 Watts
36NB-80 80 Watts
48NB-110 110 Watts
2
3
4
Individual LED lenses offer three distribution types: Type V Square (5M), Type V
Rectangular (5R) or Type IV (4)
The ARS’s hexagonal LED cluster design provides optical flexibility and light level Not available on 24NB-27
Not available on 48NB-110 input
36NB-80 only
–
OPTICS
5×5 Aisle Lighter
T5R Rectangular
T5QM Sq. Medium
T5QN Sq. Narrow
T5W Round Wide
HIGHER MOUNTING
APPLICATIONS
2×2 Narrow Spot
4×4 Narrow Flood
5×5 Medium Flood
5×3 Horizontal Flood
MOB ORDERING INFORMATION: When ordering a fixture with the motion detection
option (MOB), please specify the appropriate information. These settings are
specified in the ordering as shown in the example below.
EDR - 48NB110 - T5SW - UNV - MOB - 1 to 30 min. - 33% or 50% - ?? - MT
High to Dim Delay
Low Level
Mounting Height (ft.)
–
VOLTAGE
UNV 120-277V
347 347V
480 480V
12VDC 12VDC
ELECTRICAL OPTIONS
(specify voltage)
MOB Motion Sensor w/ 33% or 50%
Dimming
(not available on 48NB-110)
OCS Occupancy Sensor (on/off only)
BPC Cold Weather Battery Pack (can
only be used with the 36NB-80)
Dimming Drivers
–
BBT
BMT
WHT
MBT
BZT
DBT
GYS
DPS
GNT
MST
MTT
OWI
RAL
SERIES
NUMBER OF
LEDS
ARS Arceos
surface/ceiling/garage
luminaire
• IP65, Listed to UL 1598 for use in wet locations
• Occupancy, photocell, and wiHUBB wireless controls available for complete on/off and dimming operation
DRIVE
CURRENT
IES
DISTRIBUTION
5K 5100K
070 700mA
5M Type V Square
24L 24 LEDs
083 833mA
1
36L 36 LEDs
5R Type V
Rectangle
4 Type IV
VOLTAGE2
U
1 120V
2 208V
FINISH
OPTIONS
DB Bronze
PC2 Photocontrol (voltage
BL Black
WH White
PS Plat-
inum
Silver
GR Gray
FG Forest
specified and determined by
voltage field)
WIH In fixture wireless control,
consult factory
F2 Fusing (voltage specified
and determined by voltage
field)
MOTION CONTROL OPTIONS
SC03 On/Off control - No light
Green
RD Red
output when no motion
detected
Colors
SCP3 High/low control - user pro(consult
grammable settings; Factory
factory)
default is 50%
3 On/Off control - wide lens for
SCOW
1
833 only available in 18L
up to 16' mounting heights
2
Specify voltage for voltage specific options (only 120V or 277V available for Fusing)
3 High/low control - wide
consult factory for 347V and 480V
SCPW
3
Consult factory when combining control options
lens for up to 16' mounting
4
One per LED module e.g. 3 – 18L, 4 – 24L, and 6 – 36L luminaires (see page spec sheet)
heights
* XX = Color Options: DB, BL, WH, PS and GR
B
PERFORMANCE INFORMATION
Equivalency
Delivered Lumens
CC Custom
MH
HPS
IND
Number
of LEDs
4200K
5100K
System
Watts
Lumens
Per Watt
Mounting
Height
Voltage
Drivers/
Current
57ING%S! ARS-18LU-5R
SAV
70w
70w
70w
18
4508
4725
54.4
87
8 - 18 ft.
120-277V
1@833mA
62% ARS-24LU-5R
100w
100w
85w
24
5375
5800
57
102
8 - 18 ft.
120-277V
2@700mA
43ING%S! ARS-36LU-5R
SAV
150w
150w
100w
36
8030
8604
86
100
8 - 18 ft.
120-277V
3@700mA
57% ARS-18LU-5M
70w
70w
70w
18
4208
4425
54.4
81
8 - 18 ft.
120-277V
1@833mA
62ING%S! ARS-24LU-5M
SAV
100w
100w
85w
24
5012
5485
57
96
8 - 18 ft.
120-277V
2@700mA
43% ARS-36LU-5M
150w
150w
100w
36
7439
8203
86
95
8 - 18 ft.
120-277V
3@700mA
57ING%S! ARS-18LU-4
SAV
70w
70w
70w
18
4083
4300
54.4
79
8 - 18 ft.
120-277V
1@833mA
62% ARS-24LU-4
100w
100w
85w
24
4986
5360
57
94
8 - 18 ft.
120-277V
2@700mA
43% ARS-36LU-4
150w
150w
100w
36
7522
7962
86
93
8 - 18 ft.
120-277V
3@700mA
*
SAVINGS!
*
*
SAVINGS!
*
*
SAVINGS!
*
5.5”
4K 4200K
A
Series Number
12” sq.
18L1 18 LEDs
LED COLOR
3 240V
ACCESSORIES - ORDER SEPARATELY
4 277V
Description
Catalog Number
4
Vandal shield (1 per LED module)
ARS-SPC
Bird shield
ARS-BS-XX*
Comfort shield - Reduces source brightness and imagining P95
ARS-CS4
acrylic with nominal 24% lumen reduction (1 per LED module)
DIMENSIONS
A
B
Weight 5.68”
14.00” 18.00 lbs
(144.22 mm) (355.6 mm) 8.16 kg
*
*
SAVINGS!
*
SAVINGS!
HUBBELL LIGHTING
Choice of multiple light outputs based on quantity of hexagonal LED arrays: 3 = 18 LEDs, 4 = 24 LEDs or 6 = 36 LEDs hexagonal LED modules, lumen range 4,000-8,600
0-10V dimming drivers
Lumens per watt > 92-102
Choice of 7 finishes provides durable and lasting appearance
ARS
COLOR
White Textured
Bronze Textured
Gray Smooth
Green Textured
Old World Iron
DETAILS
34
scalability from a compact luminaire
MODEL
EDR Endura
1
• For ceiling mount, parking garage, tunnel and walkway applications from an 8-18 foot mounting height; A wide range of lu-
men packages and optical distributions are •
available making the ARS Series luminaire both versatile and functional
• Die cast aluminum housing features •
horizontal and vertical fins for two directional air flow that maximizes •
heat dissipation and ensures long electrical component life and luminaire •
performance
HUBBELL LIGHTING
35
Cimarron CL1
Cimarron CL1S
Area/Site Lighting
Pedestrian Site Lighting
FEATURES
2014
LED Product Partner
CL1S
• Nominal 3000K, 80 CRI; 4000K, 70 CRI; 5100K, 67 CRI, turtle friendly Amber
• Choice of 126 high brightness LED con-
figurations with individual acrylic lenses aimed to produce IES type II, III, IV
and V distributions
• Backlight control option reduces spill
light behind pole by 85%, doesn't change fixture appearance or EPA
• Patent pending EXO optic technology filters short wavelengths (blue light)
• Features exclusive wiHUBB technology
- Wireless system for On/Off and 0-10VDC dimming control to 10% light output
- Programmable autonomous operation
• DesignLights Consortium qualified
• Listed to UL1598 and CSA C22.2#250.0
24 for wet locations
• IES Progress Award Winner – 2013
• Stylish vertically finned die-cast solid top housing and lower heat sink optimize heat dissipation
• Decorative integral arm houses two stage
hinge mechanism
• Features quick-mount plate and quick-
connect wiring for easy installation
• Drivers have greater than 90% power factor and less than 20% THD
• Optional 0-10VDC continuous dimming
to 10%
• Automatic thermal self protection
• Surge protection standard
• -40 deg C to 40 deg C ambient operation
• Lektrocote TGIC polyester powder coat finish
• Stainless steel bezel mechanically compresses gasketed light engine for IP66 rating
VOLTAGE
SERIES
NO. OF LEDS
CL1S Cimarron LED
16L 16 High brightness LEDs
CCT
U3 Universal
120V-277V,
50/60 Hz
MOUNTING
1
1
120V
4K 4000K, 70CRI
5K 5100K, 67CRI
complete with quick-mount plate
41 277V
5 480V, 60 Hz
BC5 Backlight control
Leave blank for
700mA (standard)
Continuous dimming
CD
F(X)3,4 Fusing (replace
X with voltage:
1-120V, 2-208V,
3-240V, 4-277V,
5-480V, 6-347V)
2,7
0356,12 350mA (32L, 48L)
053
available for
“Turtle Friendly”
applications
(consult factory)
31 240V
OPTIONS
DRIVE CURRENT
3K 3000K, 80CRI
AM6,9 Amber (590 nm
21 208V
A 4" straight arm attached to housing
525mA (32L)
520mA (48L)
12 4.000
16.312
4.500
3.000
E4 220V, 50 Hz
BL Black
WH White
5.625
PR(X)2 NEMA Photocell
4.130
GR Gray
4.000
(premium color)
4.500
3.000
5.625
3.000
4.500
3 Type III
3L Type II rotated left
4 Type IV
4L Type IV rotated left
4.000
2L Type II rotated left
4.000
2 Type II
20.312
5S Type V Short
3R Type III rotated right
4R Type IV rotated right
4.000
16.312
H
G
E
3.0"
76 mm
F
20.3"
515 mm
FG Forest Green
G
4.1"
105 mm
H
4.1"
105 mm
Weight
19 lbs.
8.62 kg
VG Vandal guard
PR(X)5 NEMA Photo cell
receptacle (replace X
with voltage: U=120277, 5=480, 6 =347)
(premium color)
CC Custom Color
7 Select only when using voltage specific option (F or WIH)
8 Available in 350mA drive current only, Type IV, 5m only
DISTRIBUTION
9 Available in Type III and 5M only
2 Type II
10 Available with 120V/208V/240V/277V only
11 0-10V fully adjustable dimming with automatic daylight calibration and different time
delay settings; Must order minimum of one remote control to program dimming settings
3L Type III Rotated
90° left
3 Type III
WIH2,5,7 In-fixture wireless
control module (120,
277, 347 & 480V)
4L Type IV Rotated
90° left
4 Type IV
5S Type V Short
>.9
<20%
2R Type II Rotated
90° right
5M Type V Medium
5W Type V Wide
3R Type III Rotated
90° right
2L Type II Rotated
90° left
SC010 No light output when no
motion detected / On/
Off control
SCP10,11 Programmable motion
control, factory default is
10% (see page 182)
4R Type IV Rotated
90° right
Catalog Number
Description
Remote control for SCP option. Order at least one per project to program and control.
SCP-REMOTE11
DIMENSIONS
Straight Arm
Upswept Arm
E
G
F
A
A
D
12.000
D
4.5"
114 mm
4.130
C
4.0"
102 mm
12.000
B
16.3"
414 mm
5.625
A
12.0"
305 mm
4.130
 
CL1S 
 
B
RD Red
(premium color)
6 Recommended for Type II, III or Type IV distributions only
E
C
SSB Stainless steel LED bezel
PS Platinum Silver
*Projected per IESNA TM-21-11
20.312
A
16.312
16.312
G
12.000
A
3.000
E
E
GR Gray
NOTE: All poles to be drilled with #2 pattern,
FACTORY ROTATABLE OPTICS: See page 185
F
with voltage: 1-120V,
2-208V, 3-240V, 4-277V,
5-480V, 6-347V)
WH White
ACCESSORIES SEE PAGE: 203
4.500
4.000
12.000
B
D
3.000
5.625
3.000
4.500
4.130
12.000
C
RPA6 6” Round pole adapter
F(X)3,4 Fusing (replace X
BL Black
standard 2 3/8" mast arm bracket,
includes 6" straight rigid arm
ENERGY DATA
Power Factor
Total Harmonic Distortion
16.312
16.312
16.312
5M Type V Medium
5W Type V Wide
2R Type II rotated right
Catalog Number
Description
Remote control for SCP option. Order at least one per project to program and control.
SCP-REMOTE10
D
motion detected / On/
Off control
SCP8,10 Programmable motion
control, factory default is
10% (See page 182)
DB Dark Bronze
4 Select F3 fusing option for 220V
SC08 No light output when no
COLOR
5 Photocell receptacle not available with BLor WIH options
CC Custom Color
DISTRIBUTION
90L only for higher
lumen output)
E4 220V, 50 Hz
MAF Mast arm fitter for mounting to
WB Wall bracket
105 1050mA (use with
3 Fuse option not available with universal voltage
control module
12.000
(premium color)
Notes: 1 - Select only when using voltage specific options F, WIH
2 - WIH cannot be combined CD or PR(X) options
3 - Fuse option not available with U voltage
4 - Select F3 fusing option for 220V
5 - Not recommended for Type 5S, 5M or 5W
6 - 350mA required with amber CCT
7 - Dimming leads accessible for connection to third party dimming systems
8 - Available with 120V/208V/240V/277V only
9 - Dynamic EXO optic and Amber option only available in 48L configuration
10 -0-10V fully adjustable dimming with automatic daylight calibration and different time
delay settings; Must order minimum of one remote control to program dimming settings
11 - Available in Type III and 5M only
12 - 32L and 48L available with 035 and 053 drive current
Amber (590
nm available
for “Turtle
Friendly”
applications
(consult
factory)
Notes: 1 For BL option 90L and 60L; N/A 347V & 480V
2 BL, CD and or WIH cannot be combined
WIH2,8 In-fixture wireless
FG Forest Green
4.500
F 347V, 60 Hz
CD2 Continuous dimming
only
3.000
16.312
RD Red
3.000
5.625
receptacle (replace X
with voltage:
U = 120-277,
5 = 480, 6 = 347)
PS Platinum Silver
5 480V, 60 Hz
decorative upswept arm incl. &
acceptable for 90° configurations)
4.130
AM
8
BL1,2,5 Bi-level control
035 350mA Amber CCT
5K 5100K, 67CRI
17 120V
BC6 Backlight control
Leave blank for
700mA (standard)
4K 4000K, 70CRI
47 277V
AD Decorative arm mount const. (6”
12.000
120V-277V,
50/60 Hz
OPTIONS
DRIVE CURRENT
3K 3000K, 80CRI
37 240V
rigid arm included & acceptable for
90° configurations)
WB Wall bracket
16.312
CCT
U3 Universal
27 208V
A Arm mount construction (6” straight
TB Terminal block
20.312
ACCESSORIES SEE PAGE: 203
MOUNTING
DB Dark Bronze
NO. OF LEDS
COLOR
VOLTAGE
SERIES
CL1 Cimarron LED
12.000
F 347V, 60 Hz
B
 
 
CL1 
A
6 3/4"
171mm
B
21 3/4"
552mm
C
16"
406mm
B
C
D
6 5/8"
168mm
E
6 5/16"
160mm
F
5 5/8"
143mm
G
6 1/8"
155mm
EPA
< 1.3 ft²
< 0.12 m²
Weight
Approx 45 lbs.
Approx 20.4 kg
12.000
3.000
HUBBELL LIGHTING
LED Product Partner
CL1
Pedestrian
Scale
36
• Stainless steel bezel(s)
• Choice of 3 high brightness LED con-
figurations with individual acrylic lenses aimed to produce IES type II, III, IV
and V distributions
• Backlight control option reduces spill
light behind pole by 85%, doesn't change fixture appearance or EPA
- Wireless system for On/Off and 0-10VDC dimming control to 10% light output
- Programmable autonomous operation
•IP65
• Listed to UL1598 and CSA C22.2#250.024 for wet locations
• Increased lumen ouput with use of 1050mA driver (90L only)
• DesignLights Consortium qualified
• Turtle friendly Amber available
A
DIMENSIONS
FEATURES
• Stylish vertically finned die-cast solid top housing and lower heat sink optimize heat dissipation;
• Isolated electrical compartment with integral heat sinking for cooler operation and longer driver life
• Drivers have greater than 90% power factor and less than 20% THD
• Optional continuous dimming to 10% or dual circuitry available
• Automatic thermal self protection
• Surge protection standard
• 60,000 hours life (L90 @ 40˚C)*
• Shipped with upswept or straight arm for uniform look and ease of installation
• -40 deg C to 40 deg C ambient operation
• Lektrocote TGIC polyester powder coat finish
• 3000K, 80 CRI; 4000K, 70 CRI; 5100K, 67 CRI
HUBBELL LIGHTING
37
ARF2
ARF1
Compact Architectural Floodlight
Ultra Compact Architectural Floodlight
•Ultra compact LED flood with a variety of NEMA distributions for lighting applications
such as safety/security, accent, flag pole, columns, facade, area, or signs
• NEMA distributions include: - N (3x3),
M (4x4), RM (5x4) and W (6x6)
•10 high powered LEDs deliver up to 2,285 lumens at 25w
•5100K CCT 67 CRI, 4200K 70 CRI,
3000K 80 CRI
•Vented housing isolates LED module from driver, maximizing product life and performance
•High impact UV stabilized acrylic outer lens
protects LEDs and allows for cleaning and debris removal
•Rugged die-cast aluminum housing with
dark bronze finish
•Traditional ½” x 14 NPS threaded
adjustable knuckle mounting
•Visor and vandal lens available
•IP 66, Listed to UL1598 for use in wet
locations
•DLC Qualified (4200K and 5100K CCT models only); Consult DLC website for more details:
http://www.designlights.org/QPL
LED Product Partner
K
FAMILY
10L
K
Knuckle
ARF2
070
# LEDS
LED CCT
10L 10 LED
3K 3000K
MOUNTING
Arceos
Flood
Small
ARF1
DRIVE
CURRENT
1
700mA
070
4K 4200K
VOLTAGE
BEAM
5K 5100K
N
3x3
U
M
4x4
1
RM 5x4
6x6
W
Bronze
120V
BL
Black
2
208V
WH White
3
240V
GR
Gray
4
277V
PS
Platinum
FG
Forest Green
RD
Red
CC
Custom
Color
SAV
*
2
Equivalency
Series Number
ARF1-K-10L-5K
CONTROL
OPTION
FINISH
DB
   1 DLC qualification 4K and 5K models only
2 Custom colors available, contact factory
3 Must specify individual voltage for PC and Fusing options
85ING%S!
MH
HPS
CFL
Delivered
Lumens
System
Watts
Lumens
Per Watt
Max Candle
Power
Beam
Pattern
70w
70w
42w
2285
25
90
6,842
Medium
PC
3
Photocontrol
(voltage
specified and
determined
by voltage
field)
OPTIONS
FAMILY
ARF2 Arceos
Flood
Medium
3
S-302-M52
LED Product Partner
20L
# LEDS
LED CCT
20L 20 LED
3K 3000K
MOUNTING
K
Knuckle
070
DRIVE
CURRENT
1
070 700mA
4K 4200K
5K 5100K
CCT
Voltage
Drivers/
Current
5100K
120-277V
1@700mA
3
3x3
U
120V-277V DB
M
4x4
1
120V
BL
RM 5x4
2
208V
WH White
6x6
3
240V
GR
Gray
4
277V
PS
Platinum
FG
Forest Green
RD
Red
CC
Custom
Color
W
Equivalency
Series Number
85ING%S!
*
SAV
ARF2-K-20L-5K
FINISH
VOLTAGE
BEAM
N
2
Black
OPTIONS
CONTROL
OPTION
Bronze
PC
3
F
3
Photocontrol
(voltage
specified and
determined
by voltage
field)
Fusing 120
or 277 only
(voltage
determined
by voltage
field)
SP 20KA/
KV Surge
Protector
MH
HPS
CFL
Delivered
Lumens
System
Watts
Lumens
Per Watt
Max Candle
Power
Beam
Pattern
CCT
Voltage
Drivers/
Current
100w
100w
84w
4692
52
91.5
37,587
Narrow
5100K
120-277V
2@700mA
See specification page for complete fixture data
ACCESSORIES/REPLACEMENT PARTS (ORDER SEPARATELY)
Description
Polycarbonate lens (Replaces existing acrylic fixture lens)
S-319-B
Top/Bottom visor (Tap holes in lens frame S-314-B
for field installation)
Acrylic lens w/ gasket
25w, 120-277V Dimming driver
Knuckle mount Dark Bronze finish; Contact factory for additional finishes
Slipfits 1 1/2” or 2” pipe (1.9” OD or 2 3/8” OD) with 1/2”
N.P.S.M. hub; Gray
N.P.S.M. hub; Bronze
N.P.S.M. hub; White
1 Specify finish color to match fixture, e.g. DB - Bronze.
GLN-1-G
Catalog Number
S-329-B
C-5
206-BC3
FRAME & LENS
FML-SPC
S-314-B
FML-VISOR-XX1
93047961AC
93043808
20750110264
S-302
S-302-M52
FSL-SPC
NM-BC
1414
FSL-VISOR – 3/4 View
1031-1
1034
Front View
S-302
Description
Polycarbonate
acrylic fixture lens)
S-329-B
S-319-B lens (Replaces existing
C-5
Top/Bottom visor (Tap holes in lens frame for field installation)
Acrylic lens w/ gasket
25w, 120-277V Dimming driver
Knuckle mount Dark Bronze finish; Contact factory for additional finishes
N.P.S.M. hub; Gray
N.P.S.M. hub; Bronze
N.P.S.M. hub; White
S-302-M51
1 Specify finish color to match fixture, e.g.
DB - Bronze.
GLN-1-G
NM-BC
1414
1031-1
1034
206-BC3
FRAME & LENS
FSL-SPC
S-302
FSL-VISOR – 3/4 View
Front View
DIMENSIONS
DIMENSIONS
B
B
C
A
4.5"
 
ARF1  114 mm
 
A
38
•Rugged die-cast aluminum housing with
dark bronze finish
•Traditional ½” x 14 NPS threaded
adjustable knuckle mounting
•Visor and vandal lens available
•IP 65, Listed to UL1598 for use in wet
locations
•DLC Qualified (4200K and 5100K CCT models only); Consult DLC website for more details:
   1 DLC qualification 4K and 5K models only
2 Custom colors available, contact factory
3 Must specify individual voltage for PC and Fusing options
ACCESSORIES/REPLACEMENT PARTS (ORDER SEPARATELY)
S-302-M51
K
F Fusing
120 or
277V only
(voltage
determined by
voltage
field)
Catalog Number
FSL-SPC
FSL-VISOR-XX1
93047942AC
93043808
20750110264
S-302
•High impact UV stabilized acrylic outer lens
protects LEDs and allows for cleaning and debris removal
ARF1
•Compact LED flood with a variety of NEMA distributions for lighting applications
such as safety/security, accent, flag pole, columns, facade, area, or signs
• NEMA distributions include: - N (3x3),
M (4x4), RM (5x4) and W (6x6)
•20 high powered LEDs deliver up to 4,700 lumens at 52w
•5100K CCT 67 CRI, 4200K 70 CRI,
3000K 80 CRI
•Vented housing isolates LED module from driver, maximizing product life and performance
HUBBELL LIGHTING
B
C
Weight
7.5"
4.0"
6 lbs.
190 mm 102 mm 2.7 kg
Top or Bottom
Visor Mount
Detail
C
S-302-XXX
S-302-XXX
A
A
6.7"
 
ARF2  169 mm
 
Top or Bottom
Visor Mount
Detail
B
C
Weight
9.6"
4.5"
8.5 lbs.
244 mm 115 mm 3.8 kg
HUBBELL LIGHTING
39
ARF4
ARF3
Architectural Floodlight
Architectural Floodlight
• Rugged die-cast aluminum housing with
dark bronze finish
• Tempered glass lens protects LEDs and allows for easy cleaning/debris removal
• Vented housing isolates LED module from driver, maximizing product life and performance
• Visor accessory available
• 42 high powered LEDs deliver up to 9535 lumens at 97w, 98 LPW
• 3000K 80 CRI, 4200K 70 CRI, 5100K CCT 67 CRI
• Variety of NEMA distributions - N (2x2), M (4x4), RM (5x3) and W (6x6) - for wide range of
lighting applications
• 120-277V operation, 50/60Hz
• Driver 700mA, RoHS compliant and IP66
• 0-10V dimming driver
• Yoke or knuckle mount options
• 10KA surge protector option
• IP65, Listed to UL1598 for use in wet locations
• DesignLights Consortium (DLC) qualified
4K and 5K models only
• 5 year limited warranty, for more information visit:
http://www.hubbelloutdoor.com/resources/warranty/
• Rugged die-cast aluminum housing with
dark bronze finish
• 120-277V operation, 50/60Hz, 194w, 700mA
• Tempered glass lens protects LEDs and allows for easy cleaning/debris removal
• 0-10V dimming driver
• Driver 700mA, RoHS compliant and IP66
• 20KA surge protector (over current device)
option available with end of life feature
• Vented housing isolates LED module from driver, maximizing product life and performance
• Visor accessory available
• Yoke or knuckle mount options
• IP65, Listed to UL1598 for use in wet locations
• 84 high powered LEDs deliver up to 19,368
lumens at 194w, 100 LPW
• 3000K 80 CRI, 4200K 70 CRI, 5100K CCT 67 CRI
4K and 5K models only
• Variety of NEMA distributions - N (2x2), M (4x4), RM (5x3) and W (6x6) - for wide range of
lighting application
• 5 year limited warranty, for more information visit:
http://www.hubbelloutdoor.com/resources/warranty/
LED Product Partner
LED Product Partner
ARF4
ARF3
FAMILY
MOUNTING
Arceos
Flood
Large
ARF3
Y
Yoke
K
Knuckle
DRIVE
CURRENT
LED
COLOR
# LEDS
42L 42 LEDs
3K1 3000K
700mA
070
4K 4200K
5K 5100K
1
DLC qualification 4K and 5K models only
2
Must specify individual voltage for PC and
3
Consult factory for Custom Color option
SAV
*
3x3
U
M
4x4
1
RM 5x5
6x6
W
Equivalency
ARF3-K-42L-5K-070-N
CONTROL
OPTION
MOUNTING
DB
Bronze
120V
BL
Black
2
208V
WH White
3
240V
GR
Gray
4
277V
PS
Platinum
FG
Forest Green
RD
Red
CC3
Custom Color
Fusing options
Series Number
55ING%S!
VOLTAGE
BEAM
N
OPTIONS
F2 Fusing
120 or
PC2 Photocontrol
277V only
(determined
(deterby voltage
mined by
field)
voltage
field)
SP Surge
Protector,
10KA
Surge
Protector
MH
HPS
CFL
Delivered
Lumens
System
Watts
Lumens
Per Watt
Max Candle
Power
Beam
Pattern
CCT
Voltage
Drivers/
Current
250w
250w
84w
9097
97
94
77,118
Narrow
5100K
120-277V
1@700mA
FAMILY
# LEDS
MOUNTING
ARF4 Arceos
Flood
Large
Y
Yoke
K
Knuckle
1
2
Must specify individual voltage for PC and
3
DRIVE
CURRENT
LED
COLOR
84L 84 LEDs
3x3
U
120V-277V DB
M
4x4
120V
BL
4K 4200K
1
RM 5x5
2
208V
WH White
5K 5100K
W
6x6
3
240V
GR
Gray
4
277V
PS
Platinum
FG
Forest Green
RD
Red
CC3
Custom Color
070 700mA
3K1 3000K
Fusing options
Equivalency
Series Number
MOUNTING
VOLTAGE
BEAM
N
Bronze
Black
OPTIONS
CONTROL
OPTION
PC2 Photocontrol
PR
(determined
by voltage
field)
Twist lock PC
receptacle
F2
Fusing
120-277V
(determined by
voltage
field)
SP Surge
Protector,
20KA Surge
Protector
MH
HPS
CFL
Delivered
Lumens
System
Watts
Lumens
Per Watt
Max Candle
Power
Beam
Pattern
CCT
Voltage
Drivers/
Current
55ING%S!
ARF4-K-84L-5K-70-N
400w
400w
84w
18,498
194
95
153,408
Narrow
5100K
120-277V
2@700mA
55ING%S!
ARF4-K-84L-5K-70-M
400w
400w
84w
19,368
194
100
78,017
Medium
5100K
120-277V
2@700mA
SAV
SAV
*
*
ACCESSORIES/REPLACEMENT PARTS - Order Separately
Catalog Number
ACCESSORIES/REPLACEMENT PARTS - Order Separately
Description
FLL-VISOR-XX1
93053187
96w, 120-277V Dimming driver, 700mA (1 Qty)
1 Specify fixture color to match finish; e.g. DB Dark Bronze
Catalog Number
93053187
96w, 120-277V Dimming driver, 700mA (2 Qty)
1 Specify fixture color to match finish; e.g. DB Dark Bronze
6.02"
(152 mm)
14.965"
(380 mm)
Description
FLL-VISOR-XX1
DIMENSIONS
DIMENSIONS
D
A
D
A
23.23"
(590 mm)
C
B
 
 
ARF3
A
7.40"
(188 mm)
15"
380 mm
B
13.5"
524 mm
C
7.0"
188 mm
D
6"
152 mm
Weight
20.6 lbs.
9.3 kg
 
 
ARF4
B
A
B
15"
14.0"
380 mm 356 mm
C
20"
498 mm
D
E
Weight
6.0"
5.5"
36.2 lbs.
152 mm 139 mm 16.4 kg
C
E
40
HUBBELL LIGHTING
HUBBELL LIGHTING
41
Tempe TM
TRP/RDI/QSP
Bollards
Architectural Wallpacks
• Rotatable LED assembly adjustment for ideal
placement and aiming of asymmetric light
pattern
• 24 high brightness LEDs at 500mA deliver
symmetric distribution at 46w
• 12 high brightness LEDs at 700mA deliver
asymmetric distribution at 30w
• Available in two different color correlated
temperatures (3500K and 5100K)
• 50,000 hour L70 rated at 25˚C
•Extruded aluminum housing with single screw access for top relamping; Decorative cast top with tamper resistant hardware
TEMPE ROUND
• Sealed one-piece, clear acrylic lens
• Durable Lektrocote® TGIC thermoset polyester
powder coat paint finish assures long life and
maintenance-free service
• Concealed, galvanized steel anchor base; Four
1⁄2” x 10” anchor bolts on 4” diameter bolt
circle
• Listed to UL1598 for use in wet locations
• 5 year limited system warranty
TEMPE SQUARE
• Architectural wallpack in three stylish shapes with contours to accentuate building architecture
•
4K and 5K models DesignLights
Consortium (DLC) qualified, consult DLC website
for more details:
•
Occupancy control and photocell
options available for optimum energy savings
• Provides excellent illumination and uniformity
•
Durable die-cast aluminum construction
•
E nergy-efficient LED produces up to 5,062
lumens with up to 105 LPW efficacy
• Listed to UL 1598 for use in wet locations
•
Type II, III and IV (Forward throw) distributions
TRP-BBU Egress wallpack:
•
uick-mount adapter for J-boxes for easy
Q
installation
•
L ED color temperature 3000K, 4000K, and 5000K
nominal
•
Zero uplight, dark sky, neighbor friendly
TRP
QSP
• Designed to meet strict 1fc minimum
requirements; At 12ft mounting height 1fc
covers 16x16ft area, well beyond the 10x10ft standard; No uplight, external test button; 120V or 277V only; Rated -20˚C to 35˚C
RDI
30L
SERIES
TMR Tempe Round
SOURCE/WATTAGE/LED
COLOR
DB
BL
WH
GR
PS
RD
12LU-3K 12 LEDs, 30w,
asymmetric
distribution, 3500K,
120-277V, 50/60 Hz
TMS Tempe Square
12LU-5K 12 LEDs, 30w,
asymmetric
120-277V, 50/60 Hz
OPTIONS
Dark Bronze
White
Gray
symmetric
120-277V, 50/60 Hz
24LU-5K 24 LEDs, 46w,
Equivalency
QSP Quartersphere
P(X) Photo button
TMR-12LU-3K
70w
70w
42w
1,080
30
36
Asymmetric
4200K
120-277V
1@700mA
TMR-12LU-5K
70w
70w
42w
1,543
30
51
Asymmetric
5100K
120-277V
1@700mA
TMR-24LU-3K
100w
100w
42w
1,720
46
37
Symmetric
4200K
120-277V
2@520mA
46
51
Symmetric
5100K
120-277V
2@520mA
Catalog Number
SCP-REMOTE2
30
35
Asymmetric
4200K
120-277V
1@700mA
TMS-12LU-5K
70w
70w
42w
1,093
30
36
Asymmetric
5100K
120-277V
1@700mA
TMS-24LU-3K
100w
100w
42w
1,644
46
36
Symmetric
4200K
120-277V
2@520mA
TMS-24LU-5K
100w
100w
42w
1,947
46
42
Symmetric
5100K
120-277V
2@520mA
B
B
C
C
D
D
A
A
 A
 
TMR 
11,6 120V
DB Bronze
4
Type IV
21
208V
31
240V
A
7" dia.
178 mm
6 3/4" dia.
TMS 171 mm
B
41 1/2"
1054 mm
41 1/2"
1054 mm
C
5 1/2"
140 mm
5 1/2"
140 mm
HUBBELL LIGHTING
PC1 Photocontrol
(determined
by voltage
field)
Forest
Green
GR Gray
PS
D
4"
102 mm
4"
102 mm
Weight
41 lbs.
18.6 kg
41 lbs.
18.6 kg
Fusing
(determined by
voltage
field)
SC05 Motion
Platinum
SCP2,5
BBU1,6 Integral
battery
for 120
or 277V
rated for
-20˚C
to 35˚C
(Must
specify
individual
voltage)
sensor On/
Off control,
No light
output when
no motion
detected
Programmable
motion control,
factory default
is 50%
when no
motion detected (See page
183)
Description
Remote control for SCP option. Order at least one per project to program and control dimming settings
Series Number
Equivalency
MH
HPS
CFL
Delivered
Lumens
System
Watts
Lumens
Per Watt
Mounting Height
CCT
Voltage
Drivers/
Current
73%
TRP/RDI/QSP-30L5K-035
150w
150w
2x42w
3,583
34
105
12-15 ft.
5000K
120-277V
1@350mA
78%
TRP/RDI/QSP-30L5K-053
175w
200w
2x42w
5,062
53
96
15-20 ft.
5000K
120-277V
1@525mA
DIMENSIONS
14”
(355 mm)
7.13”
(180 mm)
TRP
9.25”
(235 mm)
Weight:
13.2 lbs 5.98 kg
16.5”
(420 mm)
RDI
7.13”
(180 mm)
Weight:
13.1 lbs 5.94 kg
9.25”
(235 mm)
18.13”
(450 mm)
QSP
9.13”
(230 mm)
Weight:
11.6 lbs 5.26 kg
9.13”
(230 mm)
42
FG
OPTIONS
F1
*
SAVINGS!
A
Type III
CONTROL
OPTIONS
ACCESSORIES (ORDER SEPARATELY)
*
SAVINGS!
DIMENSIONS
36
Color
Drivers/
Current
1,010
053 525mA
specify individual voltage for BBU, PC and Fusing options
Must order minimum of one remote to program dimming settings, consult factory for details, 0-10V fully adjustable
dimming with automatic daylight calibration and different time delay settings, 120V or 277V only
3
4
5
PC option not applicable, included in sensor. For SCP, PC function turns on to lower setting until motion is detected
6
BBU only available in TRP, 350mA, Type III, 120V or 277V
Voltage
42w
BL Black
1
Must
2
CCT
70w
U
CC3 Custom
36 36” luminaire height
CD Continuous dimming
PAB Pre-ship anchor bolts
Distribution
70w
FINISH
Type II
WH White
Lumens
Per Watt
TMS-12LU-3K
VOLTAGE
2
30 30” luminaire height
System
Watts
2,622
4K 4000K
DISTRIBUTION
0356 350mA
RD Red
Delivered
Lumens
42w
DRIVE CURRENT
24 24” luminare height
CFL
100w
CCT
3K4 3000K
41,6 277V
HPS
100w
30 High
brightness
LEDs
5K 5000K
MH
TMR-24LU-5K
30L
(replace X
with voltage:
1-120V, 2-208V,
3-240V, 4-277V
Platinum Silver
symmetric
120-277V, 50/60 Hz
Series Number
# OF LEDS
TRP6 Trapezoid
RDI Radius
with voltage:
1-120V, 2-208V,
3-240V, 4-277V
Black
Red
(premium color)
FG Forest Green
(premium color)
CC Custom Color
(consult factory)
24LU-3K 24 LEDs, 46w,
FAMILY
F(X) Fusing (replace X
18.13”
(460 mm)
HUBBELL LIGHTING
43
Executive EXPD
Executive RT21-RT25 - LED
Area/Site LED Retrofit Power Door
Area/Site Lighting
Executive LED Power Door upgrade kit provides
easy tool less replacement of existing Executive
HID luminaires. Available in 30 and 60 LED
configurations, the LED Power Door upgrade kit
replaces up to 250w Executive HID systems.
TOOL-LESS ACCESS
• Fully accessible by a front tool-less push
button—an Executive trademark
PRIMARY ELECTRICAL DISCONNECT
• All power is terminated as soon as the door opens
• Fully serviceable without needing to shut down
power to the entire circuit; No exposed live
connections
ON THE DOOR SERVICEABILITY
• Both the LEDs and driver tray assemblies mount
directly to the extruded doorframe
• Remove the entire door or each assembly
without tools to service; Fully rotatable
reflector hinges on door.
FULLY SEALED OPTICS
• All optical systems are sealed from exterior contaminants to ensure great performance year round
WIRELESS ACCESSORY
Features exclusive wiHUBB technology
- On/Off programmable accessory
•
Extruded LED aluminum site/ area lighter with
8" straight extruded arm.
TOOL-LESS ACCESS
• Fully accessible by a front tool-less push
button
an Executive trademark
PRIMARY ELECTRICAL DISCONNECT
• All power is terminated as soon as the door opens
Fully serviceable without needing to shut down
power to the entire circuit; No exposed live
connections
ON THE DOOR SERVICEABILITY
RFD-10
FAMILY
# OF LEDS
CCT
DRIVE CURRENT
DISTRIBUTION
VOLTAGE
DOOR
OPTIONS
EXPD RT21
30L 30 High
brightness
LEDs
3K 3000K
070 700mA
(standard)
2 Type II
U Universal
120V-277V,
50/60 Hz
RFD-10 Powerdoor
BC3 Backlight
control
60L 60 High
brightness
LEDs
OPTIONAL ANODIZED FINISHES
• A finish that cannot peel, flake or fade, and is
resistant to corrosive and harsh climates
CONTROL OPTIONS
• On/Off programmable accessory
• Motion sensor control options
ORDERING INFORMATION - ORDERING EXAMPLE: EXEC-RT21-30L3K-070-2-U-10-VM-SC0-BZ-STR
EXPD RT25
Both the LEDs and driver tray assemblies
mount
directly to the extruded doorframe
Remove the entire door or each assembly
without tools to service
•
4K 4200K
5K 5100K
AM
4
Amber
(590 µm
available
for “Turtle
Friendly”
applications
(consult
factory)
0354 350mA
Amber
(required
with Amber
CCT)
3 Type III
4 Type IV
11 120V
5M Type V
medium
21 208V
5S Type V
short
5W Type V
wide
2L Type II
Rotated
90° left
31 240V
41 277V
5 480V, 60 Hz
F 347V, 60 Hz
E 220V, 50 Hz
CONTROLLABILITY
OPTIONS
FAMILY
# OF LEDS
CCT
DRIVE CURRENT
DISTRIBUTION
VOLTAGE
EXEC RT21
30L 30 High
brightness
LEDs
3K 3000K
070 700mA
(standard)
2 Type II
U Universal
120V-277V,
50/60 Hz
EXEC RT25
60L 60 High
brightness
LEDs
SC02 On/Off control - No
light output when no
motion detected
4K 4200K
5K 5100K
AM
SCP2 High/low control user programmable
settings; Factory
default is 50%
WIH2 In-fixture wireless
control module (120,
277, 347 & 480V)
4
Amber
(590 µm
available
for “Turtle
Friendly”
applications
(consult
factory)
0354 350mA
Amber
(required
with Amber
CCT)
5S Type V
short
41 277V
10
28
29
31 240V
322
5 480V, 60 Hz
F 347V, 60 Hz
E 220V, 50 Hz
49
Note: First digit denotes
fixture quantity per
assembly
a
EXEC-RT25
EPA: 2.2 WT: 64 lbs.
Dimensions: a = 20" b = 25" c = 8.75"
Arm: 2" x 4" x 8"
EXEC-RT32
EPA: 3.5 WT: 105 lbs.
Dimensions: a = 26" b = 32.5" c = 10.75"
Arm: 2" x 5.75" x 8"
Wall mount
VF
Vertical
slipfitter
HF
Horizontal
slipfitter
F2
Fuse
EXI
Extruded
insert
COLOR
POLE SECTION
Powder Coat
STR Square
Straight
BL
Black
DB
Dark
Bronze
WH
White
PS
Platinum
Silver
Anodized
Backlight
control
LBZ
Light
Bronze
CONTROLLABILITY
OPTIONS
MBZ
Medium
Bronze
DBZ
Dark
Bronze
ABK
Black
AAL
Natural
Aluminum
SC02 On/Off control No light output
when no motion
detected
SCP2 High/low
control - user
programmable
settings; Factory
default is 50%
C30 3.0" dia
round
C35 3.5" dia
round
C40 4.0" dia
round
C45 4.5" dia
round
C50 5.0" dia
round
C60 6.0" dia
round
PR2 Photo cell
receptacle
3R Type III
Rotated
90° right
WIH2 In-fixture
wireless control
module (120,
277, 347 &
480V)
4R Type IV
Rotated
90° right
NOTES:
1 Select only when voltage specific option included SC0, SCP, PR, WIH, F
1. ‘32’ mounting (3 @ 120) available with round pole only or with pole top fitter
2 Must select specific voltage (not “U”)
2. Combination ‘5H’ and ‘HS’ not available
3 Not available with distributions: 5S, 5M or 5W
3. ‘WM’, ‘HF’not available with RT32
4 Amber CCT only available with 350mA drive current
4. The ‘QTZ’ option will have a 2-minute delay, and is only available with 150w DC bayonet 5 Available in Type III and 5M only
5. If the color for the ‘EXI’ is not specified, insert will be brushed aluminum
6E3D only available with 60L; Dynamic EXO configuration consists of 30 EXO optics,
6. 150PMH uses M102 lamp
30 clear optics (Consult factory for control options)
7. 750w max
WM
BC3
39
2R Type II
Rotated
90° right
DIMENSIONS
FIXTURE MOUNTING – FACTORY ROTATED OPTICS
b
c
EXEC-RT21
Dimensions: a = 16" b = 21" c = 6.75"
Arm: 2" x 4" x 8"
HUBBELL LIGHTING
21 208V
4L Type IV
Rotated
90° left
3R Type III
Rotated
90° right
44
5M Type V
medium
3L Type III
Rotated
90° left
2R Type II
Rotated
90° right
EXEC-RT21
Dimensions: a = 16" b = 21" c = 6.75"
Arm: 2" x 4" x 8"
11 120V
2L Type II
Rotated
90° left
4L Type IV
Rotated
90° left
1 Select only when voltage specific option included SC0, SCP, PR, WIH, F
2 Must select specific voltage (not “U”)
3 Not available with distributions: 5S, 5M or 5W
4 Amber CCT only available with 350mA drive current
5 Available in Type III and 5M only
6E3D only available with 60L; Dynamic EXO configuration consists of 30 EXO optics,
30 clear optics (Consult factory for control options)
4 Type IV
5W Type V
wide
3L Type III
Rotated
90° left
4R Type IV
Rotated
90° right
3 Type III
OPTIONS
MOUNTING
NOTES:
1. ‘32’ mounting (3 @ 120) available with round pole only or with pole top fitter
2. Combination ‘5H’ and ‘HS’ not available
3. ‘WM’, ‘HF’not available with RT32
4. The ‘QTZ’ option will have a 2-minute delay, and is only available with 150w DC bayonet
5. If the color for the ‘EXI’ is not specified, insert will be brushed aluminum
6. 150PMH uses M102 lamp
7. 750w max
For proper light distribution and performance, rotated
optics must be mounted as referenced in illustration.
Consult instruction sheet included when mounting.
2L Type II rotated 90˚ left
3L Type III rotated 90˚ left
EXEC-RT32
4L Type IV
EPA:rotated
3.5 WT:90˚
105left
lbs.
EXEC-RT25
Dimensions: a = 20" b = 25" c = 8.75"
Arm: 2" x 4" x 8"
Dimensions: a = 26" b = 32.5" c = 10.75"
Arm: 2" x 5.75" x 8"
a
c
b
2R
3R
4R
Type II rotated 90˚ right
Type III rotated 90˚ right
Type IV rotated 90˚ right
HUBBELL LIGHTING
45
ArcheType X Wall
ArcheType X LED Flood
®
®
ARWX09, ARWX16, ARWX25
ARFX09, ARFX16, ARFX25
FEATURES
FEATURES
First outdoor LED luminaires with factory or field, infinitely adjustable Type “X” Distribution
• 3 Tenon Mount Housing Sizes – 9 (3x3), 16 (4x4) or 25 (5x5) LEAR Module Configurations
• LEAR Module adjustable with 0-70° Tilt and 355° Rotation
• 35° housing adjustment -5° to +30°
• 54, 96 or 150 LED options
• 3,000, 4,200 and 5,100k color temperatures
•
•
First outdoor LED luminaires with factory or field, infinitely adjustable
Type “X” Distribution
• 3 Wall Mount Housing Sizes – 9 (3x3), 16 (4x4) or 25 (5x5)
LEAR Module Configurations
• LEAR Module adjustable with 0-70° Tilt and 355° Rotation
• Up or down orientation, 10° housing adjustment -5° to +5°
• 54, 96 or 150 LED options
• 3,000, 4,200 and 5,100k color temperatures
ARWX16
ARFX16
ORDERING. INFORMATION (Example)
WF
ARFX25
FIXTURE
ARFX09
ARFX16
ARFX25
1
54 LEDs
96 LEDs
150 LEDs
BL
5K60480
ELECTRICAL MODULE1
DISTRIBUTION
WF Wide Flood
Color Temperature
35-70
3K 3000K
VF Vertical Flood
4K 4200K
MF Medium Flood
35-60
5K 5100K
NF Narrow Flood
SP Spot
X Type X
Custom
Current
UV
350-700mA
for ARFX09/16
350-600mA
347
for ARFX25
480
Voltage
Universal
Voltage from
120 to 277V
347V
480V
FPL
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum
Silver
WH White
CC Custom
Color*
*Consult
representative
ARWX25
FIXTURE
ARWX09 54 LEDs
ARWX16 96 LEDs
ARWX25 150 LEDs
FIXTURE OPTIONS
A30 120V Photocell
Control
A31 208V Photocell
Control
A32 240V Photocell
Control
A33 277V Photocell
Control
A34 480V Photocell
Control
A35 347V Photocell
Control
FPL 3/16” Polycarbonate
lens with silicone
gaskets
SF 120V, 277V, 347V
Single Fuse
DF 208V, 240V, 480V
Double Fuse
Standard driver has a 0-10V dimmming interface with a dimming
range of 10-100%. Is compatible with most control sytems
including Hubbell Building Automation wiHUBB™. Approved
dimmers include Lutron Diva ATV, Lutron Nova NFTV and NTFTV.
Note: Not compatible with current sourcing dimmers. Controls
compatible via Gray and Purple dimming lead.
1
2
BL
5K60480
DISTRIBUTION
2 Type II
3 Type III
4 Type IV
S Spot
G Grazer
X Type X
Custom
ELECTRICAL MODULE1
Color Temperature
3K 3000K
4K 4200K
5K 5100K
Current
UV
35-70 350-700mA
for ARFX09/16
35-60 350-600mA
347
for ARFX25
480
Voltage
Universal
Voltage from
120 to 277V
347V
480V
FPL
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum
Silver
WH White
CC Custom
Color*
*Consult
representative
Standard driver has a 0-10V dimmming interface with a dimming
range of 10-100%. Is compatible with most control sytems
including Hubbell Building Automation wiHUBB™. Approved
dimmers include Lutron Diva ATV, Lutron Nova NFTV and NTFTV.
Note: Not compatible with current sourcing dimmers. Controls
compatible via Gray and Purple dimming lead.
Controls available. Contact factory.
Controls available. Contact factory.
ARFX09
ARFX16
13L"
8A"
(349 mm)
(205 mm)
9"
ARFX25
16C"
(25 mm)
(426 mm)
20"
9"
(508 mm)
(25 mm)
ARFX09
ARFX16
ARFX25
16C"
(349 mm)
(426 mm)
24L"
23K"
(508 mm)
26D"
6H"
7G"
7G"
(170 mm)
(189 mm)
(676 mm)
(629 mm)
(597 mm)
(676 mm)
(589 mm)
(556 mm)
20"
25"
23F"
21E"
13L"
FIXTURE OPTIONS
A30 120V Photocell
Control
A31 208V Photocell
Control
A32 240V Photocell
Control
A33 277V Photocell
Control
A34 480V Photocell
Control
A35 347V Photocell
Control
FPL 3/16” Polycarbonate
lens with silicone
gaskets
SF 120V, 277V, 347V
Single Fuse
DF 208V, 240V, 480V
Double Fuse
SIDE
7H"
7G"
7H"
(189 mm)
(195 mm)
(189 mm)
(195 mm)
SIDE
SIDE
20"
16C"
13L"
(426 mm)
(349 mm)
7K"
(191 mm)
FRONT
SIDE
6K"
BOTTOM
HUBBELL LIGHTING
FRONT
SIDE
(165 mm)
46
7K"
(191 mm)
7K"
(191 mm)
20”
FRONT
14A"
SIDE
6K"
(508 mm)
13L"
(358 mm)
6K"
(165 mm)
(165 mm)
BOTTOM
BOTTOM
(349 mm)
BOTTOM
FRONT
14A"
16C"
(358 mm)
(426 mm)
BOTTOM
FRONT
20"
14A"
(508 mm)
(358 mm)
BOTTOM
FRONT
HUBBELL LIGHTING
47
The Archetype LED with PicoPrism
®
The Archetype LED with PicoEmitter
™
®
™
Small and AR Large Luminaire
AR LED
SAR LED
Small and AR Large Luminaire
FEATURES
FEATURES
•
LED PicoPrism technology
Efficient, effective downward control of light with full uplight cutoff
• IES Type II, III, IV, V, and One-Way L or R Full-Cutoff distribution patterns
• Easy-access, tool-less latches for lower maintenance
•
•
•
Wireless system for 0-10VDC full range dimming control
• Programmable autonomous operation
•
FIXTURE
SAR1
SAR2
SAR3
SAR4
SAR5
SARR
SARL
1
2
3
SAR3P35
EPA
MOUNTING
1SA 1 Arm Side Mt. 0.7
2SB 2 Arm Side Mt. 1.4
2SL 2 Arm Side Mt. 1.2
3ST 3 Arm Side Mt. 1.9
3SY1 3 Arm Side Mt. 1.9
4SC 4 Arm Side Mt. 2.5
1A 1 Arm Side Mt. 1.2
2B 2 Arm Side Mt. 2.4
2L 2 Arm Side Mt. 2.0
3T 3 Arm Side Mt. 3.2
3Y1 3 Arm Side Mt. 3.2
4C 4 Arm Side Mt. 3.9
1W2 Single Wall Mt. n/a
NOTE: EPA is for Fixture only
Distribution
Type I
AR1
Type II AR2
Type III AR3
Type IV AR4
Type V AR5
Type R ARR
Type L
ARL
Type I
Type II
Type III
Type IV
Type V
Type R
Type L
40L5K120
SG
VSF-1SA
A-30
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
*Consult representative
ELECTRICAL MODULE3
Source
Voltages
Color Temp.
40L 40 LEDs for SAR
2K 580nm 120 120V
45W for 350mA,
3K 3000K 208 208V
93W for 700mA
4K 4200K 240 240V
5K 5100K 277 277V
347 347V4
80L 80 LEDs for AR
480 480V4
92W for 350mA,
188W for 700mA
Current
P35 350mA PicoPrism
P70 700mA PicoPrism
FIXTURE OPTIONS
1W Wall Mounting
LS Polycarbonate Lens5
TL Tamper Resistant Latch5
NFO Neigbor Friendly Optic
SF Single Fuse for 120,277, 347V
DF Double Fuse for 208, 240,
480V
A-25 Photocell Receptacle
A-30 120V SAR photocell
NEMA7 NEMA Receptacle
TCR Time Clock Relay
SCL Occupancy Sensor to 16’
SCH Occupancy Sensor to 30’
SCL-R Pole Occupancy Sensor
to 16’, Round
SCL-S Pole Occupancy Sensor
to 16’, Square
4
5
Due to current unavailability of 347V and 480V
drivers, specification of these voltages may
feature an integral step-down transformer.
Required only for vandal protection in
locations where fixtures can be reached by
unauthorized persons.
SAR
SLIPFITTER MOUNTING OPTIONS
VERTICAL
4” Round, Standard Fixtures
VSF-1SA 1 fixture side mt.
VSF-2SB 2 fixtures side mt.
180°
VSF-2SL 2 fixtures side mt. 90°
VSF-3ST 3 fixtures side mt. 90°
VSF-3SY 3 fixtures side mt.
120°
VSF-4SC 4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
SVSF-2SB 2 fixtures side mt.
180°
SVSF-2SL 2 fixtures side mt. 90°
SVSF-3ST 3 fixtures side mt. 90°
SVSF-4SC 4 fixtures side mt. 90°
HORIZONTAL
to 30’, Round
HSF for Pole Davit Arm
SCH-S Pole Occupancy Sensor
to 30’, Square
WIH-M WiHUBB, In-Fixture Wireless
Control Module
WSI-M WiSCAPE, Bidirectional
Wireless RF Device
Note: HID to LED Upgrade Kits available.
Contact factory.
Consult DLC Website for current qualified
product listings.
SAR3E35
SIDE
17B"
(432 mm)
1L"
(25 mm)
120L
(102 mm)
FRONT
SIDE
22K"
ARM
CROSS-SECTION
60 LEDs, 66W For
SAR LED
120 LEDs, 130W For
AR LED
Color Temp.
2K 580nm
3K 3000K
4K 4200K
5K 5100K
1
2
3
Distribution
Type I
AR1
Type II AR2
Type III AR3
Type IV AR4
Type V AR5
Type R ARR
Type L
ARL
Current
E35 350mA PicoEmitter
Type I
Type II
Type III
Type IV
Type V
Type R
Type L
to 16’, Round
to 16’, Square
SCH-R Pole Occupancy Sensor
to 30’, Round
3Y only available on round slipfitter.
Junction box in wall must provide
adequate fixture support.
Driver has a 0-10V dimming interface
with a dimming range of 10-100%.
Compatible with most control systems.
8"
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V4
480 480V4
FIXTURE OPTIONS
1W Wall Mounting
SF Single Fuse for 120,277, 347V
480V
NFO Neighbor Friendly Optic
4
5
Due to current unavailability of 347V and 480V SCH-S Pole Occupancy Sensor
to 30’, Square
drivers, specification of these voltages may
feature an integral step-down transformer.
WIH-M WiHUBB, In-Fixture Wireless
Required only for vandal protection in
Control Module
locations where fixtures can be reached by
unauthorized persons.
(559 mm)
(51 mm)
(152 mm)
SIDE
ARM
CROSS-SECTION
17B"
(432 mm)
TOP
5"
8"
(203 mm)
1L"
(25 mm)
(203 mm)
4J"
(102 mm)
FRONT
SIDE
22K"
ARM
CROSS-SECTION
(559 mm)
2"
(51 mm)
6"
(152 mm)
ARM
CROSS-SECTION
16"
12"
(406 mm)
(305 mm)
BOTTOM
Contact factory.
product listings.
8"
(152 mm)
FRONT
VERTICAL
180°
120°
180°
HORIZONTAL
AR
(127 mm)
6"
THE ARCHETYPE AR LARGE
TOP
2"
PRA12-5125SA/SG
POLE / POLE ARM
See Arms & Poles Selection
Guide at www.kimlighting.
com for pole EPA &
ordering.
Wireless RF Device
6"
(203 mm)
4J"
(406 mm)
BOTTOM
Source
(203 mm)
16"
12"
(305 mm)
ELECTRICAL MODULE3
60L
VSF-1SA
A-30
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE
SAR1
SAR2
SAR3
SAR4
SAR5
SARR
SARL
SG
FIXTURE FINISH
EPA
MOUNTING
1SA 1 Arm Side Mt. 0.7
2SB 2 Arm Side Mt. 1.4
2SL 2 Arm Side Mt. 1.2
3ST 3 Arm Side Mt. 1.9
3SY1 3 Arm Side Mt. 1.9
4SC 4 Arm Side Mt. 2.5
3Y1 3 Arm Side Mt. 3.2
1W2 Single Wall Mt. n/a
8"
6"
(152 mm)
60L5K120
SAR
TOP
5"
1SA
THE ARCHETYPE SAR SMALL
(127 mm)
HUBBELL LIGHTING
See Arms & Poles Selection Guide at
www.kimlighting.com for pole EPA &
ordering.
AR
TOP
48
POLE / POLE ARM
THE ARCHETYPE AR LARGE
THE ARCHETYPE SAR SMALL
FRONT
PRA12-5125SA/SG
Junction box in wall must provide
adequate fixture support.
SAR LED
•
1SA
AR LED
LED PicoEmitter™ technology
Efficient, effective downward control of light with full uplight cutoff
• IES Type II, III, IV, V, and One-Way L or R distribution patterns
• Easy-access, tool-less latches for lower maintenance
BOTTOM
BOTTOM
HUBBELL LIGHTING
49
Curvilinear LED with PicoEmitter
CC/CCS25 Curvilinear LED with PicoPrism
™
™
CC/CCS25 LED Arm Mount
CC
CC17 & CC21 LED Arm Mount
FEATURES
FEATURES
•
Classic, curvilinear style luminaire for architectural relevance and
reduced wind loads
• LED models with up to 19,000+ lumen output, 350mA or 700mA drive currents
• Dark-Sky compliant, full-cutoff optics
•
CC/CCS
LED models incorporating patented LED PicoEmitter technology
• Classic, curvilinear style luminaire for architectural relevance and
reduced wind loads
• Dark-Sky compliant, full-cutoff optics with flat glass lens
•
•
•
1A
CC25A3P35
DB
60L5K120
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
*Consult
representative
MOUNTING
EPA
25"
3Y 3 Arm Side Mt. 4.3
1W 1 Single Wall Mt. —
FIXTURE - ARM MOUNT
Type I
CC-25"
CCS-25"
Current
CC25A1
CCS25A1
P35 350 mA PicoPrism
P70 700 mA PicoPrism
Type II
CC25A2
CCS25A2
Type III
CC25A3
CCS25A3
Type IV
CC25A4
CCS25A4
Type V
CC25A5
CCS25A5
Type R
CC25AR
CCS25AR
Type L
CC25AL
CCS25AL
1
2
3
4
Programmable autonomous operation
A-30
PRA12-5125A/DB
—
FIXTURE OPTIONS
1W Wall Mounting
SF Single Fuse for 120,277,
347V
DF Double Fuse for 208,
240, 480V
A-25 Photocell receptacle
NFO Neigbor Friendly Optic
to 16’, Round4
to 16’, Square
to 30’, Round4
to 30’, Square
REV Accent Reveals (CC
only)
WIH-M WiHUBB, In-Fixture
Wireless Control Module
Wireless RF Device
Junction box in wall must provide adequate fixture support.
Driver has a 0-10V dimming interface with a dimming range of 10-100%. Compatible
with most control systems.
Due to current unavailability of 347V and 480V drivers, specification of these voltages
may feature an integral step-down transformer.
Specify pole diameter if round, voltage and color, e.g. SCL-R4/277/BL.
HORIZONTAL
VERTICAL
180°
120°
180°
ELECTRICAL MODULE2
Source
Color Temperature
96L 96 LEDs
2K Amber
106W at 350mA,
3K 3000K
219W at 700mA
4K 4200K
5K 5100K
POLE / POLE ARM
com for pole EPA & ordering.
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V3
480 480V3
Contact factory.
product listings.
1A
MOUNTING
1A 1 Arm Side Mt.
CC17A3E35
EPA
17"
0.9
1.8
1.6
2.5
2.5
2.8
—
DB
60L5K120
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray
PS Platinum Silver
WH White
CC Custom Color*
*Consult
representative
EPA
21"
1.2
2.4
2.2
3.4
3.4
3.9
—
A-30
PRA12-5125A/DB
—
FIXTURE OPTIONS
L17F Polycarbonate
Lens3
L21F Polycarbonate
Lens3
1W Wall Mounting4
A-30 120 Volt photocell
A-35 347 Volt Photocell
2A-30 120 Volt Photocell
POLE / POLE ARM
com for pole EPA & ordering.
REV Accent Reveals (CC
only)
2L 2 Arm Side Mt.
to 16’, Round5
3T 3 Arm Side Mt.
SCL-S Pole Occupancy Sensor SLIPFITTER MOUNTING OPTIONS
3Y 3 Arm Side Mt.
to 16’, Square
HORIZONTAL
4C 4 Arm Side Mt.
to 30’, Round5
1W Single Wall Mt.
VERTICAL
to 30’, Square
FIXTURE - ARM MOUNT
CC-17"
CCS-17" CC-21" CCS-21"
Current
Wireless RF Device
180°
Type I
CC17A1 CCS17A1 CC21A1 CCS21A1
E35 = 350mA
Type II
CC17A2 CCS17A2 CC21A2 CCS21A2 350mA PicoEmitter
Type III CC17A3 CCS21A3 CC21A3 CCS21A3
Type IV CC21A4 CCS21A4 CC21A4 CCS21A4
120°
Type V
CC21A5 CCS21A5 CC21A5 CCS21A5
4 fixtures side mt. 90°
VSF-4SC
Type R
CC21AR CCS21AR CC21AR CCS21AR
4”
Square,
Standard Fixtures
Type L
CC21AL CCS21AL CC21AL CCS21AL
ELECTRICAL MODULE2
1
Due to current unavailability of 347V and 480V drivers,
180°
specification of these voltages may feature an integral
Source
Color Temperature
Voltages
SVSF-2SL
step-down transformer.
60L 60 LEDs
2K Amber
120 120V
2 Driver has a 0-10V dimming interface with a dimming range
64W
3000K
208V
3K
208
of 10-100%. Compatible with most control systems.
120L 120 LEDs
3 Use only in high-vandalism situations. Useful life is limited
4K 4000K
240 240V
130W
by UV discoloration from sunlight.
5000K
5K
277V
277
Note:
HID to LED Upgrade Kits available.
4 Junction box in wall must provide adequate fixture support.
Contact factory.
347 347V1
5 Specify pole diameter if round, voltage and color, e.g.
480 480V1
SCL-R4/277/BL.
2B 2 Arm Side Mt.
product listings.
CC25
CC17
CURVILINEAR
CUTOFF
CUTOFF
CURVILINEAR CUTOFF CURVILINEAR
CC17A
CC17A
CC17A
CC21A
17"
.
21"DIADIA.
(432 mm)
4K"
(114 mm)
(533 mm)
10"
8"
50
(51 mm)
8"
8"
(203 mm)
(203 mm)
CCS21A
CCS17A
CCS17A
CCS17A
Arm
10"- Section
Cross
(254 mm)
typical for
all sizes
CCS21A
(51 mm)
10" 10"
8"
(254 mm)
(254 mm)
(203
CCS21A
CCS17A
CCS21A
Arm
Cross - Section
typical for
all sizes
CURVILINEAR
CUTOFF
CUTOFF
CURVILINEAR CUTOFF CURVILINEAR
CURVILINEAR CUTOFF
CC17A
CC21A
CC21A
CC21A 6"
6"
(152 mm)
(152 mm)
17" DIA
17"
. DIA.
17"
DIA.
4K" 4K"
21" DIA.
21"mm)
DIA.
4K"
21"mm)
DIA.
(432 mm)
(432
(114
(114 mm)
(114 mm) (432 mm)
(114 mm)
2"
(533
mm)
(533
mm)
(114
mm)
2"
(533 mm)
4K" 4K"
(254mm)
mm)
(203
HUBBELL LIGHTING
CURVILINEAR CUTOFF
CC21A
6"
4K"4K"
4K"
(114
mm)
(114
mm)
(114 mm)
6"
6"
(152 mm)
(152 mm)
2"
2"
(51 mm)(51 mm)
Arm Arm
10"Section
Cross Cross
- Section
(254 -mm)
typicaltypical
for for
all sizes
all sizes
CCS21A
21" DIA.
(533 mm)
4K"
(114 mm)
CC17A
(152 mm)
2"
(432 mm)
17"
.
21"DIADIA.
(432 mm)
4K"
(114 mm)
(533 mm)
(51 mm)
Arm
Cross - Section
typical for
all sizes
8"
CC17A
CC17A
CC17A
CC21A
17" DIA.
10"
8"
CURVILINEAR CUTOFF
CC17A
CC21A
CC21A
CC21A 6"
6"
(152 mm)
(152 mm)
17" DIA
17"
. DIA.
17"
DIA.
4K" 4K"
21" DIA.
21"mm)
DIA.
4K"
21"mm)
DIA.
(432 mm)
(432
(114
(114 mm)
(114 mm) (432 mm)
(114 mm)
2"
(533
mm)
(533
mm)
(114
mm)
2"
(533 mm)
4K" 4K"
(51 mm)
8"
8"
(203 mm)
(254mm)
mm)
(203
(203 mm)
(203 mm)
CCS17A
CCS21A
CCS17A
CCS17A
CCS17A
Arm
10"- Section
Cross
(254 mm)
typical for
all sizes
CCS21A
(51 mm)
10" 10"
8"
(254 mm)
(254 mm)
(203
CCS21A
CCS17A
CCS21A
Arm
Cross - Section
typical for
all sizes
CC21A
6"
4K"4K"
4K"
(114
mm)
(114
mm)
(114 mm)
6"
(152 mm)
(152 mm)
2"
2"
(51 mm)(51 mm)
21" DIA.
(533 mm)
Arm Arm
10"Section
Cross Cross
- Section
(254 -mm)
typicaltypical
for for
all sizes
all sizes
CCS21A
HUBBELL LIGHTING
51
WARP9 LED with PicoPrism
™
WARP9 LED with PicoEmitter
™
™
™
Small & Large Luminaire
WP9LP-LED
WP9SP-LED
Small & Large Luminaire
FEATURES
FEATURES
•
LED PicoPrism™ technology
Patented design, incorporating visual stealth technology
• Sealed optical module, IP-66 rated
•
•
•
Wireless system with a 0 - 10V dimming interface
• with a dimming range of 10 - 100%
•
LED PicoEmitter™ technology
Patented design, incorporating visual stealth technology
• Sealed optical chamber, IP-66 rated
Wireless system with a 0 - 10V dimming interface
• with a dimming range of 10 - 100%
•
EPA
MOUNTING
WP9SP
2 Arm Side Mt.
3 Arm Side Mt.
3 Arm Side Mt.
4 Arm Side Mt.
Single Wall Mt.
0.82
1.3
1.3
1.5
n/a
1.47
2.5
2.5
2.7
n/a
*Wall Mounting: A cast-aluminum
mounting plate is mounted to the
wall with four bolts (by others).
Fixture and arm are mounted to the
cast aluminum cover plate before
attaching to the wall mounting
plate.
1
2
3
4
SG
FIXTURE FINISH
Current
Distribution
BL Black
WP9S1 Type I P35 350mA PicoPrism DB Dark Bronze
WP9S2 Type II P70 700mA PicoPrism SG Stealth Gray
WP9S3 Type III
PS Platinum Silver
WP9S4 Type IV
WH White
WP9S5 Type V
CC Custom Color*
WP9SR Type R Right
*Consult
WP9SL Type L Left
representative
WP9L1 Type I
WP9L2 Type II
WP9L3 Type III
WP9L4 Type IV
WP9l5 Type V
WP9LR Type R Right
WP9LL Type L Left
1SA 1 Arm Side Mt. 0.52 0.95
2SB 2 Arm Side Mt. 1.04 1.9
2SL
3ST
3SY1
4SC
1W*
60L5K120
FIXTURE
WP9LP
ELECTRICAL MODULE2
Source
Color Temperature
60L 60 LEDs, 137W 2K 580nm
For WP9SP
3K 3000K
Due to current unavailability of 347V
& 480V drivers, specification of these 120L 120 LEDs, 274W 4K 4200K
For WP9LP
voltages may feature an integral step5K 5100K
down transformer.
Specify pole diameter if round, voltage
and color, e.g. SCL-R4/277/BL.
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V3
480 480V3
PRA12-5125SA/SG
SF/A-25
FIXTURE OPTIONS
WP9SP
POLE
Note: HID to LED Upgrade Kits
available. Contact factory.
WP9LP
8I"
SIDE
1"
5N"
8I"
(38 mm)
(262 mm)
SIDE
(113 mm)
15"
1I"
(49 mm)
WP9S
WP9L
FIXTURE
Current
WP9S1 Type I E35 350mA PicoEmitter
Distibution
WP9LE
TOP
26I"
5I"
(892 mm)
(175 mm)
(262 mm)
8I"
(151 mm)
(130 mm)
(227 mm)
SIDE
1"
5N"
8I"
10M"
10M"
(227 mm)
(262 mm)
(141 mm)
SIDE
4G"
(49 mm) FRONT
(262 mm)
5B"
(113 mm)
(130 mm)
20"
(381 mm)
(508 mm)
BOTTOM
Lens shall be clear glass
BOTTOM
HUBBELL LIGHTING
5I"
(151 mm)
1I"
15"
52
1"
(25 mm)
(25 mm)
1K"
(38 mm)
FRONT
(508 mm)
BOTTOM
35B"
6E"
(684 mm)
(129 mm)
5B"
FRONT
20"
(381 mm)
1"
(25 mm)
4G"
FRONT
—
10M"
10M"
(227 mm)
(141 mm)
PRA12-5125SA/SG
SF/A-25
FIXTURE FINISH
FIXTURE OPTIONS
POLE
BL Black
1SA 1 Arm Side Mt. 0.52 0.95
Guide at www.kimlighting.com
DB Dark Bronze
1W Wall Mounting
for pole EPA & ordering.
2SB 2 Arm Side Mt. 1.04 1.9
SG Stealth Gray
SF Single Fuse for 120,
PS Platinum Silver
2SL 2 Arm Side Mt. 0.82 1.47 WP9S2 Type II
277, 347V
SLIPFITTER MTG. OPTIONS
WH White
WP9S3 Type III
3ST 3 Arm Side Mt. 1.3 2.5
HORIZONTAL
CC Custom Color*
240 480V
WP9S4 Type IV
3SY1 3 Arm Side Mt. 1.3 2.5
HSF Horizontal Slipfitter ML
4SC 4 Arm Side Mt. 1.5 2.7
WP9S5 Type V
VERTICAL
1W* Single Wall Mt. n/a n/a
WP9SR Type R
Right
*Wall Mounting: A cast-aluminum
A-30 120V Photocell Button VSF-1SA 1 fixture side mt.
mounting plate is mounted to the wall
WP9SL Type L Left
A-31 208V Photocell Button VSF-2SB 2 fixtures side mt.
with four bolts (by others). Fixture and
A-32 240V Photocell Button
WP9L1 Type I
180°
arm are mounted to the cast aluminum
cover plate before attaching to the wall WP9L2 Type II
mounting plate.
WP9L3 Type III
WP9L4 Type IV
120°
WP9L5 Type V
1
VSF-4SC
2 Driver has a 0-10V dimming interface
WP9LR Type R
Right
to 16’, Round4
3 Due to current unavailability of 347V WP9LL Type L Left
SCL-S Pole Occupancy Sensor SVSF-2SB 2 fixtures side mt.
& 480V drivers, specification of these
ELECTRICAL MODULE2
to 16’, Square
voltages may feature an integral step180°
down transformer.
Source
Color
Temperature
Voltages
4 Required only for vandal protection
to
30
’, Round4
60L 60 LEDs, 65W 2K 580nm
120 120V
in locations where fixtures can be
SCH-S Pole Occupancy Sensor SVSF-3ST 3 fixtures side mt. 90°
For WP9SE
reached by unauthorized persons.
3K 3000K
208 208V
to 30’, Square
120L 120 LEDs,
4K 4200K
240 240V
130W For
Wireless
Control
Module
5K 5100K
277 277V
Contact factory.
WP9LE
WSI-M WiSCAPE, Bidirectional Consult DLC Website for current qualified
347 347V3
Wireless RF Device
product listings.
480 480V3
MOUNTING
5A"
(892 mm)
(175 mm)
(25 mm)
1K"
EPA
SG
TOP
35B"
6E"
(684 mm)
60L5K120
WP9S1E35
TOP
26I"
(227 mm)
1SA
WP9SE
TOP
(129 mm)
—
NFO Neighbor Friendly Optic See Arms & Poles Selection Guide at
www.kimlighting.com for pole EPA &
1W Wall Mounting
ordering.
SF Single Fuse for 120,
277, 347V
SLIPFITTER MTG. OPTIONS
HORIZONTAL
240 480V
HSF Horizontal Slipfitter Mt
VERTICAL
SCL Occupancy Sensor
to 16’
VSF-2SB 2 fixtures side mt. 180°
SCH Occupancy Sensor
to 30’
SCL-R Pole Occupancy Sensor VSF-3ST 3 fixtures side mt. 90°
to 16’, Round4
VSF-3SY 3 fixtures side mt. 120°
SCL-S Pole Occupancy Sensor VSF-4SC 4 fixtures side mt. 90°
to 16’, Square
to 30’, Round4
SCH-S Pole Occupancy Sensor SVSF-2SB 2 fixtures side mt. 180°
to 30’, Square
Wireless RF Device
Consult DLC Website for current
qualified product listings.
5A"
WP9SE-LED
WP9S1P70
1SA
WP9LE-LED
Lens shall be clear glass
BOTTOM
HUBBELL LIGHTING
53
Lightvault
ALTITUDE
®
™
LTV81SS / LTV82SS / LTV83SS Stainless Steel Lens Ring
ALT60, ALT96, ALT120, ALT180, ALT240, ALT300 LED Luminaire
ALT300
FEATURES
FEATURES
The ultimate in LED luminaire design featuring innovative engineering,
thermal management and unique patented1 PicoPrism™ optics
• Proportional and scalable aesthetic housing, available in six sizes to cover
more environments than ever before
• WiHUBB features on/off/variable and step dimming
control, SNAP protocol mesh network, AES-128 encryption
detection, occupancy sensor interface and intuitive,
user-friendly software
Composite pour boxes ship ahead to simplify installation
•
ALT240
ALT180
ALT120
ALT96
ALT60
•
•
•
•
•
Sealed light engine prevents ingress of moisture and/or debris
Bluetooth enabled field-aiming allows for wireless adjustment and dimming
Available in spot, wall-wash, and narrow flood distributions
3000K, 4200K, and 5000K CCT
Optional Slip Resistant Lens, Hex Cell Louver, Prismatic Lens
LTV82SS
LTV83SS
LTV81SS
1SA
MOUNTING
EPA
ALT60
ALT96
ALT120
1SA 1 Arm Side Mt. 0.58 0.64 0.72
2SB 2 Arm Side Mt. 1.17 1.28 1.44
2SL 2 Arm Side Mt. 0.91 0.97 1.05
3ST 3 Arm Side Mt. 1.50 1.61 1.77
3SY* 3 Arm Side Mt. 1.50 1.61 1.77
4SC 4 Arm Side Mt. 1.66 1.78 1.93
1W Single Wall Mt. n/a
120L5K277
ALT3P35
n/a
WH SF/A26
Source
Color Temperature3
60L 60 LEDs 2K 580nm4
96L 96 LEDs 3K 3000K
120L 120 LEDs 4K 4200K
180L 180 LEDs 5K 5100K
240L 240 LEDs
300L 300 LEDs2
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V5
480 480V5
n/a
FIXTURE
1
2
3
4
5
6
FIXTURE FINISH
SG Stealth Gray
BL Black
DB Dark Bronze
LG Light Gray
PS Platinum Silver
WH White
CC Custom Color*
*Consult
representative
Current
P35 350mA PicoPrism
P70 700mA PicoPrism
US Patent No. D674,965 S. Other patents pending.
Driver has a 0-10V dimming interface with a dimming range of 10-100%.
Compatible with most control systems. 300L available in 350mA only.
For custom optics and color temperature configurations, contact factory.
Turtle friendly
347V & 480V currents may be supplied with step-down transformer.
Use only when vandalism is anticipated to be high. Required only for vandal
protection in locations where fixtures can be reached by unauthorized persons.
ALT96 – Approx. Wt. = 30 lbs.
7L"
26L"
23J"
7L"
(197 mm)
(197 mm)
(591 mm)
(51 mm)
Speed Mount
Adapter
SIDE
SIDE
32K"
9L"
(248 mm)
(826 mm)
(248 mm)
HORIZONTAL
HSF Horizontal Slipfitter Mount
VERTICAL
VSF-2SB 2 fixtures side mt. 180°
VSF-3SY 3 fixtures side mt. 120°5
SVSF-2SB 2 fixtures side mt. 180°
9L"
(248 mm)
(933 mm)
ELECTRICAL MODULE
Source
Spot1,2
Narrow Flood1,2
Wall Wash1,2
Spot1,2
Narrow Flood1,2
36L 36 LEDs
Consult DLC Website for current
qualified product listings.
Color Temperature
3K 3000K
4K 4200K
5K 5100K
FIXTURE OPTIONS1
SR Slip-Resistant Lens
HL Hex Cell Louver.
SP or NF only.
Best with spot optics
PL Prismatic Lens softens
distribution.
RCA81 Rebar cage anchor
for RCA81
for RCA82
for RCA83
Voltage
Universal
Voltage
(120 thru 277)
18L 18 LEDs
LTV82SS/WW Wall Wash
LTV83SS/SP Spot1,2
LTV83SS/NF Narrow Flood1,2
1,2
16L 16 LEDs
12L 12 LEDs
LTV83SS/WW Wall Wash1,2
1
2
All lens options are integral parts of component
module and must be installed at factory.
Opening of Component Module on site will void
warranty
Pour Box rough-in housing ships separately and as a
quick-ship if requested.
LTV83SS
LTV81SS
13" DIA.
(332 mm)
4"
(102 mm)
2"
(51 mm)
7I" DIA.
2"
(202 mm)
(210 mm)
4B"
2 NPT Pipe Plugs
(105 mm)
TOP
SIDE
BOTTOM
3 NPT Pipe Plugs
(432 mm)
FRONT
TOP
SIDE
TOP
3E"
(98 mm)
BOTTOM
LTV82SS
ALT180/ALT240/ALT300
42L"
(25 mm)
8J"
1"
(26 mm)
(254 mm)
(26 mm)
1"
(51 mm)
10"
1"
ALT60/ALT96/ALT120
SIDE
36L"
9L"
LTV81SS/SP
LTV81SS/NF
LTV81SS/WW
LTV82SS/SP
LTV82SS/NF
PL/RCA81
36L5KUV
FIXTURE
With Flat Frame Lens Ring
Guide at www.kimlighting.com
for pole EPA & ordering.
(768 mm)
2"
(51 mm)
Speed Mount
Adapter
TOP
LTV81SS/SP
17"
(432 mm)
2"
(51 mm)
Speed Mount
Adapter
TOP
(197 mm)
17"
17"
(432 mm)
2"
1SW Wall Mounting
SF Single Fuse for 120, 277,
347 Line Volts
480 Line Volts
FGL Flat Glass Lens (350mA
Only)
FPL Flat Polycarbonate Lens6
(350mA Only)
NFO Type III or IV
Neighbor Friendly Optic
A26 Photocell Receptacle
to 16’, Round
to 16’, Square
to 30’, Round
to 30’, Square
Wireless RF Device
30J"
7L"
(680 mm)
—
POLE
FIXTURE OPTIONS
ELECTRICAL MODULE2
*Available round poles only. EPA is for Fixture only
Distribution
ALT1 Type I
ALT2 Type II
ALT3 Type III
ALT4 Type IV
ALT5 Type V
ALTR Type R,
Right
ALTL Type L, Left
PRA20-4188SA/WH
4B"
(1086 mm)
(105 mm)
DEBRIS SHIELDS
4"
10C" DIA.
2"
(102 mm)
(263 mm)
(51 mm)
1-11.5" NPT
IN BOTTOM
(2 PLCS)
22.5°
(51 mm)
Speed Mount
Adapter
54
HUBBELL LIGHTING
25"
25"
25"
(635 mm)
2"
(635 mm)
2"
(51 mm)
Speed Mount
Adapter
(635 mm)
2"
1"
FRONT
1.00
(2 PLCS)
9E"
(26 mm)
3E"
TOP
TOP
SIDE
SIDE
SIDE
1-11.5" NPT
IN BOTTOM
(3 PLCS)
2.00
(2 PLCS)
1-11.5" NPT
IN BOTTOM
(3 PLCS)
(250 mm)
(98 mm)
(51 mm)
Speed Mount
Adapter
TOP
2.00
(2 PLCS)
3 NPT Pipe Plugs
TOP
SIDE
LTV81
LTV82
LTV83
BOTTOM
HUBBELL LIGHTING
55
Bullet
Parking Garage Luminaire
Accent Lighting
PGL7
FEATURES
FEATURES
•
Energy efficient 10W luminaires
•
•
Unique swivel mount provides superior aiming without loosening over time
•
Constructed out of die-cast aluminum with powder coat paint finish for
excellent value and rugged service in standard colors
•
LED models incorporating patented LED PicoEmitter™ technology
The PGL7 offers wide or narrow optics in two distribution patterns
• Various control systems are available. Contact factory
for additional information on your specific project
PGL7
KLVL202
ORDERING INFORMATION (Example)
KLVL202
FIXTURE
12 VOLT1 ALUMINUM
KLVL202 10W, 3LEDs,
3000K
BL
FIXTURE FINISH
BL Black
DB Dark Bronze
GR Verde Green
HL
FIXTURE OPTIONS
HL Hex Cell Louver2
SL Spread Lens3,4
PL Prismatic Lens3,4
EP17
MOUNTING OPTIONS
EP17 Landscape Light Post
Mount
KLV400 Spear Mount5
KLV405 Surface Mount5
KLV415 Extension Module5
60L3K277
PGL71N
LED FIXTURE
Narrow
Cat. Nos.
PGL71 series PGL71N
PGL74 series PGL74N
Wide
PGL71W
PGL74W
WH
FIXTURE FINISH
PS Platinum Silver
(Standard)
WH White
CC Custom Color*
ELECTRICAL MODULE1
PGL7 LED, 60 LEDs, 73 Watt
Color Temperature
Source
2K 580nm
60L 60 LED’s
3K 3000K
4K 4200K
5K 5100K
1
2
Voltages
120 120V
208 208V
240 240V
277 277V
347 347V
480 480V
TS
SC0
FIXTURE OPTIONS2
LS Polycarbonate Refractor
Lens
ASOL Semi-Diffused Acrylic
Refractor Lens
LSOL Semi-Diffused Polycarbonate
Refractor Lens
SF Single Fuse for 120, 277, 347
Line Volts
DF Double Fuse for 208, 240, 480
Line Volts
PB2PS Balanced Pendant J-Box
and Bird Shroud
SMART CONTROL OPTIONS2
SCO On/off Control
SCP High/Low Control
WIH-M WiHUBB, In-Fixture Wireless Control
Module
WSI-M WiSCAPE, Bidirectional Wireless RF
Device
LLCM Limelight Radio and Occupancy
Sensor Control
LLGWT-03 Limelight Ethernet Gateway
Hardware
LLGWT-04 Limelight Cellular Gateway Hardware
LLSC-100 Group Software Commissioning for
up to 100 Luminaires
Driver has a 0-10V dimming interface with a dimming
range of 10-100%. Compatible with most control systems.
For more information, refer to PGL7 Product Specification
Sheet at www.kimlighting.com.
Note: HID to LED Upgrade Kits available. Contact factory.
Consult DLC Website for current qualified product listings.
PGL7 DISTRIBUTIONS
1
2
3
4
Remote transformer required,
purchased separately.
Inserts behind lens.
Replaces standard lens.
Cannot be used in combination with
HL Hex Cell Louver
PGL71W Type V Square
PGL74W Type III
Down Light
Down Light
Driving Direction
Driving Direction or away from perimetter
PGL71N Type V Square
PGL74N Type III
Down Light
Down Light
5E"
(149 mm)
Driving Direction or away from perimetter
Driving Direction
3B" DIA.
(79 mm)
2B"
(54 mm)
PGL7
PGL7 with Standard
Polycarbonate Refractor
18" DIA.
(457 mm)
PGL7 with Optional Balanced Pendant
J-Box and Bird Shroud (PB2)
10" DIA.
4J"
(254 mm)
11L"
(108 mm)
4"
(299 mm)
ACRYLIC
(102 mm)
K" NPT
7K"
(191 mm)
8J"
(210 mm)
11L"
(299 mm)
LEXAN® Option
Smart Control System (SC2)
LimeLight Control System
3F"
(76 mm)
4C"
(299 mm)
provided
3F"
(76 mm)
4C"
(299 mm)
provided
3K"
(89 mm)
56
HUBBELL LIGHTING
HUBBELL LIGHTING
57
Scarab
Ravenna
™
™
Accent Lighting
Highlighter & Lowlighter
FEATURES
KLVL711
LED light sources with sealed light engine
• Narrow flood distributions for accent lighting
• The Scarab series combines integrated design and application flexibility to produce
a landscape accent system that meets the broadest range of illumination needs
•
KLVL716
Unique swivel mount provides superior aiming without loosening over time
Available in aluminum finish for excellent value and rugged service, or brass
offering long life and natural weathering that blends into the landscape
•
•
VG
JBR-2
FIXTURE FINISH
MOUNTING OPTIONS
BRASS
120 VOLT MOUNTING OPTIONS
NB Natural
Brass
VG Verde Green
Patina
EP17 Landscape Light Post
Mount
KLV400 Low Voltage Spear
Mount
KLV405 Low Voltage Surface
Mount
KLV410 Sealed Connector
KLV415 Extension Module
KLVTC24 Time Clock
KLV427 #12-2 12 Volt Cable
KLVPC1 Direct Mount
Photocell
KLVPC2 Remote Mount
Photocell
ALUMINUM
BL Black
DB Dark Bronze
GR Verde Green
ELECTRICAL MODULE 12V
Source
Color Temperature
3 LEDs, 10W
3K 3000K
1
2
3
4
5
Ravenna
Highlighter
ORDERING INFORMATION (Example)
3L3K
BRASS FIXTURE
KLVL716 Narrow Flood
ALUMINUM FIXTURE
KLVL711 Narrow Flood
Available in both 12 volt and 120 volt, the Ravenna Highlighter and
Lowlighter companions are highly adaptable to a range of landscape accent and
path lighting solutions
• Elegance and style in leaf-like design with slender body that blends into
natural surroundings
• 120 volt option includes integrated electronic stepdown transformer when
distance between fixtures and power source make 12 volt distribution impractical
•
Ravenna
Lowlighter
KLVL716
FEATURES
Inserts behind lens into existing lens gasket.
Cannot be used in combination with SL Spread or PL
Prismatic Lens.
Cannot be used in combination with HL Hex Cell Louver.
Finished to match fixture.
Replaces standard lens ring/hood on fixture.
UV
BN176
3L5K
HIGHLIGHTER FIXTURE
ELECTRICAL MODULE
VG
HL
FIXTURE FINISH
EP17
FIXTURE OPTIONS
12/120 VOLT LED ONLY
12 VOLT1
BRASS
HL Hex Cell Louver for
brightness control2
20W - 50W Source Color Temperature
KLV175 Brass
NB Natural Brass
MR16
Bipin
3
LEDs
3000K
3L
3K
PL Prismatic Spread
KLV170 Aluminum
VG Verde Green
Halogen
Lens softens lamp
Patina
LED
KLVL176 Brass
distribution.
ALUMINUM
Best w/ flood2
KLVL171 Aluminum
BL Black
SL Linear Spread Lens
120 VOLT
DB Dark Bronze
creates oval beam
20W - 50W
BN175 Brass
Verde
Green
GR
pattern.
EL170 Aluminum MR16 Bipin
Best w/ spot2
Halogen
VOLTAGE
LED
BNL176 Brass
120 VOLT LED ONLY
ELL171 Aluminum
Voltage
LOWLIGHTER FIXTURE
UV Universal Voltage
12 VOLT1
from 120 to 277V
20W - 50W
KLV275 Brass
with a ±10%
tolerance
KLV270 Aluminum MR16 Bipin
Halogen
LED
KLVL276 Brass
KLV271 Aluminum
120 VOLT
20W - 50W
BNL275 Brass
EL270 Aluminum MR16 Bipin
Halogen
1
4
Remote transformer required.
Specify finish, NB - Natural Brass,
2
LED
BNL276 Brass
Inserts behind lens.
VG - Verde Green Patina.
3
Specify
finish,
BL
Black,
See p. 853 for fixture option &
ELL271 Aluminum
KLV600 200W Above-grade
Transformer
Transformer
Transformer
KLV640 300W Below-grade
Transfromer, 120V
Transfromer, 277V
Transfromer, 120V
Transfromer, 277V
DB - Dark Bronze, GR - Verde Green.
MOUNTING OPTIONS
EP17 Landscape Light Post Mount, 12V & 120V
KLV400
J-25N
KLV405
KLV415
JB1
JBR-2
JBR-3
JBR-21
JBR-24
JBR-30
JBR-32
SM18
J-27N
JWBR
JW
Spear Mount, 12V3
Portable Spear Mount, 120V, Lowlighter only
Surface Mount, 12V, Lowlighter only1
Extension Mount, 12V, Lowlighter only3
Architectural J-box, 12V & 120V3
In-grade J-box (2) K" NPT in bottom,
12V & 120V
In-grade J-box (2) L" NPT in bottom,
12V & 120V
In-grade J-box (2) K" NPT in sides,
(2) K" NPT in bottom, 12V & 120V
In-grade J-box (4) K" NPT in sides,
(2) K" NPT in bottom, 12V & 120V
Brass in-grade staked J-box, 12V & 120V
Brass in-grade staked J-box
with cord, 120V
Stanchion Mount, 12V & 120V3
Surface Mount, 120V, Lowlighter only
Brass Architectural Wall Mount, 120V,
Lowlighter only4
Architectural Wall Mount, 120V,
Lowlighter only
mounting option dimension drawings.
RAVENNA HIGHLIGHTER
RAVENNA LOWLIGHTER
5M"
SCARAB ACCENT LIGHTING
5B"
2K"
4M"
(130 mm)
3C"
(85.7 mm)
(52 mm)
5M"
(110 mm)
(64 mm)
2A" DIA.
4E"r.
4K"
3"
(76 mm)
2" DIA.
(51 mm)
3N" DIA.
(114 mm)
(91 mm)
2B"
3D"
(143 mm)
(92 mm)
2B"
Electronic Stepdown
Transformer in base
120 Volt only
8E"
(225 mm)
23L"
(54 mm)
(603 mm)
K" NPT
C725/KLV725/KLV726
EL720/KLV720/KLV721
3G" DIA.
(87 mm)
FGS71
(92 mm)
5D"
K" NPT
DS71
Debris screen for FGS
Full Glare Shield only
3D"
(135 mm)
6D"r.
AGS72
(54 mm)
KLV715/KLV710
33.6° cutoff
(92 mm)
(168 mm)
(124 mm)
AGS71
3D"
(135 mm)
7K"
(191 mm)
31° cutoff
FGS72
K" NPSM
Electronic Stepdown
Transformer in base
120 Volt only
DS72
Debris screen for FGS
Full Glare Shield only
K" NPSM
58
HUBBELL LIGHTING
HUBBELL LIGHTING
59
K5
K4
KicK Small Scale
KicK Medium Scale
TM
TM
• Reliable, uniform, low glare illumination
• Type II, III and IV distributions
• 3000K, 4200K, 5100K CCT
• Integral surge and thermal protection
• 0-10V dimming ready
• IP66 optical system
• Reliable, uniform, low glare illumination
• Type II, III and IV distributions
• 3000K, 4200K, 5100K CCT
• Integral surge and thermal protection
• 0-10V dimming ready
• IP66 optical system
–
MODEL
4" wide luminaire
K41 Single fixture
K42 Two fixtures 180º apart
K43 There fixtures 90º apart
K44 Four fixtures 90º apart
OPTICS
T2 Type 2
distribution
T3 Type 3
distribution
T4 Type 4
distribution
DIMENSIONS
Integral Pole Luminaire
* Weight and EPA for fixtures only
–
–
–
OPTICAL FINISH
Standard white. Optional,
may choose one
MO Matte black finish
for 0% uplight
FO Fixture finish for
appearance
LIGHT ENGINE
7000 Series
7050
7040
7030
5000 Series
5050
5040
5030
CONTROL
MCPR Multi-Channel
Photocell
Receptacle.
WIH Wireless ready for
HBA wiHUBB.
–
–
MOUNTING
Integral Pole
PS410-125 10' luminaire
height.
height.
height.
height.
height.
height.
Tenon Mount
TA23
Side Mount
SMK Side mount
KicK
MODEL
K41-…-PS4XX-125 K42-…-PS4XX-125
K43-…-PS4XX-125K44-…-PS4XX-125
OVERALL LENGTH
36.4" / 925mm
10" / 254mm
36.4" / 925mm
68.9" / 1750mm
OVERALL WIDTH
10" / 254mm
68.9" / 1750mm
68.9" / 1750mm
68.9" / 1750mm
WEIGHT
15 lbs.
30 lbs.
45 lbs.
60 lbs.
EPA*1.03 2.06
2.612.61
Tenon Mount Luminaire
Slips over a 2 3/8”/60mm diameter by 4”/102mm tall tenon
–
–
MOUNTING OPTIONS
Twin mount at staggered
heights
Mounting holes for a fixture
at 180°, K41-...PS4… only,
may choose one
TS8 8' from bottom
TS10 10' from bottom
Pole Accessories
May choose one
GFI GFCI Receptacle
RBC Integral Receptacle
DRB Duplex Receptacle
FIXTURE FINISH
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic
Bronze
VBL Verde Blue
CRT Corten
MAL Matte
Aluminum
MDG Medium Grey
ATG Antique Green
LGY Light Grey
RAL/ Provide a RAL
PREMIUM 4 digit color
COLOR number
CUSTOM Please provide
COLOR color chip for
matching
Side Mounted Luminaire
Mounts to the side of 4"/102mm square pole.
4.0
MODEL
5" wide luminaire
K51 Single fixture
K52 Two fixtures 180º apart
K53 There fixtures 90º apart
K54 Four fixtures 90º apart
OPTICS
T2 Type 2
distribution
T3 Type 3
distribution
T4 Type 4
distribution
DIMENSIONS
Integral Pole Luminaire
* Weight and EPA for fixtures only
–
–
–
OPTICAL FINISH
Standard white. Optional,
may choose one
MO Matte black finish
for 0% uplight
FO Fixture finish for
appearance
LIGHT ENGINE
12000 Series
12050
12040
12030
9000 Series
9050
9040
9030
CONTROL
MCPR Multi-Channel
Photocell
Receptacle.
WIH Wireless ready for
HBA wiHUBB.
–
–
MOUNTING
Integral Pole
height.
height.
height.
height.
height.
height.
Tenon Mount
TA23
Side Mount
SMK Side mount
KicK
MODEL
K51-…-PS5XX-188 K52-…-PS5XX-188
K53-…-PS5XX-188K54-…-PS5XX-188
OVERALL LENGTH
43.5” / 1106mm
15.5” / 390mm
49” / 1238mm
82” / 2083mm
OVERALL WIDTH
15.5” / 390mm
82” / 2083mm
82” / 2083mm
82” / 2083mm
WEIGHT
20 lbs.
40 lbs.
60 lbs.
80 lbs.
EPA* 1.4 2.7
3.13.1
–
MOUNTING OPTIONS
Twin mount at staggered
heights
Mounting holes for a fixture
at 180°, K51-...PS5… only,
may choose one
TS8 8' from bottom
Pole Accessories
May choose one
GFI GFCI Receptacle
RBC Integral Receptacle
DRB Duplex Receptacle
FIXTURE FINISH
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic
Bronze
VBL Verde Blue
CRT Corten
MAL Matte
Aluminum
MDG Medium Grey
ATG Antique Green
LGY Light Grey
RAL/ Provide a RAL
COLOR number
matching
Side Mounted Luminaire
Mounts to the side of 4"/102mm square pole.
TYPE
5.0"
38.6"
Tenon Mount Luminaire
Slips over a 2 3/8”/60mm diameter by 4”/102mm tall tenon
32.4
7.5
13.5
15.7"
6.0
6.8"
O .5
MODEL
K41-…-TA23 K42-…-TA23
K43-…-TA23K44-…-TA23
OVERALL HEIGHT
17.5” / 445mm
17.5” / 445mm
17.5” / 445mm
17.5” / 445mm
OVERALL LENGTH
36.4” / 925mm
10” / 254mm
36.4” / 925mm
68.9” / 1750mm
OVERALL WIDTH
4” / 102mm
68.9” / 1750mm
68.9” / 1750mm
68.9” / 1750mm
WEIGHT
18.5 lbs.
33.5 lbs.
48.5 lbs.
63.5 lbs.
2.612.61
EPA* 1.33 2.42
60
HUBBELL LIGHTING
MODEL
K41-…-SMK
OVERALL HEIGHT
13.5” / 343mm
OVERALL LENGTH
32.4” / 823mm
OVERALL WIDTH
4” / 102mm
WEIGHT
15 lbs.
EPA1.03
.5"
MODEL
K51-…-TA23K52-…-TA23
K53-…-TA23 K54-…-TA23
OVERALL HEIGHT
19” / 483mm
19” / 483mm
19” / 483mm
19” / 483mm
OVERALL LENGTH
43.5” / 1106mm
5” / 127mm
43.5” / 1106mm
82” / 2083mm
OVERALL WIDTH
5” / 127mm
82” / 2083mm
82” / 2083mm
82” / 2083mm
WEIGHT
25 lbs.
40 lbs.
55 lbs.
70 lbs.
EPA
1.83.2
3.5 3.5
MODEL
K51-…-SMK
OVERALL HEIGHT
15.7” / 399mm
OVERALL LENGTH
38.6” / 980mm
OVERALL WIDTH
5” / 127mm
WEIGHT
20 lbs.
EPA1.4
HUBBELL LIGHTING
61
PROL
PKWS/PKWM/PKWB/PKSA/PKSP
Parkway Square Small/Medium/Bollard/Sconce
Providence® Large LED
®
•Three hood styles and six decorative
screen options
•Custom mounting options, including
3" square pole
•Tool-less access
•Cast aluminum struts
•Full cutoff options
•IP65
•Powder coat finish in 13 standard
colors with a polymer primer sealer
• Type 2, 3, 4, 5, Custom, Left & Right
distributions
• IP66 optics
• DLC listed
• Powder coat finish in 13 standard
• MicroCoreTM technology
• Canted design provides even
illumination with less glare
• Upgrade kits available
• 0-10v dimming ready
• Surge protection included
PKWS/PKWM/PKWB/PKSA/PKSP
–
MODEL
Pole Mount
PKWS Accent scale.
Slips over a 3"
open top pole.
PKWM Pedestrian scale.
Slips over a 4"
open top pole.
Bollard
PKWB Bollard
Sconce
PKSA Accent scale
PKSP Pedestrian scale
HOODS (not for sconce)
ANG Angled hood
STR Straight hood
IND Indirect hood
DBL Double hood
DISTRIBUTION
PKWM
Horizontal lens - Available with
ANG hood only.
Y2HC, Y3HC, IES Type 2,
Y4HC, Y5HC 3, 4, 5
Vertical lens.
Y2VC, Y3VC, IES Type 2,
Y4VC, Y5VC 3, 4, 5
PKWS, PKWB, PKSA, PKSP
T2, T3, T4, T5 IES Type 2,
3, 4, 5
LENS
C Clear secondary
lens
D Diffused
secondary lens
DIMENSIONS
SMALL
21" SQ x 21.75" H - Vertical
14" SQ x 23" H - Horizontal
62
HUBBELL LIGHTING
–
–
–
–
LED COLOR TEMPERATURE
PKWS - T1, T3, T5 (IES Type 1, 3, 5 distribution)
9LED-3K 9 LED array. 3000K. GLA only.
36LED-3K 36 LED array. 3000K
PKWM
32LED-3K 3000K.
32LED-4K 4200K.
32LED-5K 5100K.
PKWB - T1, T3, T5 (IES Type 1, 3, 5 distribution)
36LED-3K 36 LED array. 3000K. Horizontal LED only.
PKSA
15LED-3K
15LED-4K
15LED-5K
24LED-3K
24LED-4K
24LED-5K
PKSP
18LED-3K
18LED-4K
18LED-4K
30LED-3K
30LED-4K
15 LED array. 3000K. DB/DS/UB/US only.
24 LED array. 3000K. DBUS/UBDS/USDS only.
30LED-5K 30 LED array. 5100K. DBUS/UBDS/USDS only.
–
–
DRIVER
(PKWM, 120-277 VAC input)
Y2HC
700mA
500mA
Y2VC
525mA
350mA
688mA, 73 watts.
500mA, 53 watts.
525mA, 58 watts.
350mA, 38 watts.
DECORATIVE SCREENS
(OPTIONAL)
Painted to match
fixture. Also available
in stainless steel or
copper. Not available with
MicroEmitter or horizontal
LED optics.
DSIN Infinity design
DSOF Offset design
DSWH Wheat design
DSTR Trio design
DSSH Shutter design
DSCS Custom design
(Contact factory)
OPTIONS
ULS Upper lens shield.
Reduces light
above hood.
TA23 2 3/8" O.D. x
4" long tenon.
Required for all
poles, except for
PS4. GLA only.
For AAL poles,
order TEN23
option.
LDL Lightly diffused
lens
COP Brushed copper
hood
STS Stainless steel
hood
SSP Screen in brushed
stainless steel
CPR Screen in brushed
copper
FS1 Single fuse
holder
–
–
–
COLORS
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic Bronze
VBL Verde Blue
CRT Corten
MAL Matte Aluminum
MDG Medium Grey
ATG Antique Green
LGY Light Grey
RAL/ Provide a RAL
COLOR number
matching
PROL
–
MODEL
PROL Providence large housing
scale
UPGRADE KITS - PROL-LK
Distribution (Class 2, 120 thru 277 volt)
T2, T3, T4, IES Type 2, 3, 4, 5,
T5, TL, TR 45° Left, 45° right
distribution
Color Temperature
56LED-3K Warm White 3000K diodes
56LED-4K Neutral White 4200K
diodes
56LED-5K Bright White 5100K
diodes
Ballast/Driver
700 700 milliamp drive
current, 132 watts
current, 85 watts
Bezel Finish/Color
Bezel available in 13 standard finishes
and premium finishes (See Colors
section)
MOUNTING (not for Sconce)
Wall Mount - Mounting plate
provided. Hardware by others.
PSWM-TU Fixture above with
arm mounted up.
PSWM-TD Fixture above with
arm mounted down.
PSWM-BU Fixture below with
arm mounted up.
PSWM-BD Fixture below with
arm mounted down.
DIMENSIONS
23.6"/599
mm
23.6"
–
–
COLOR TEMPERATURE
56LED-3K Warm White,
3000K output
56LED-4K Neutral White,
4200K output
56LED-5K Bright White,
5100K output
DISTRIBUTION
T2 Type 2
T3 Type 3
T4 Type 4
T5 Type 5
TL 45º Left
TR 45º Right
DRIVER
120 thru 277 volt
700 700mA drive
current, 132 watts
450 450mA drive
current, 85 watts
–
COLORS
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic Bronze
VBL Verde Blue
CRT Corten
MAL Matte
Aluminum
MDG Medium Grey
ATG Antique Green
LGY Light Grey
RAL/ Provide a RAL
COLOR number
COLOR a color chip for
matching
–
OPTIONS
WIH In fixture wireless control
module.
SPK Decorative cast aluminum
spikes on the top and bottom
of the four vertical struts.
PFN Cast aluminum finial painted a
brass color.
BPS Cast aluminum struts painted
a brass color - spikes also
painted brass if option SPK
chosen
LDL Lightly diffused lens. Frosted, flat
tempered glass lens has a lightly
diffused finish to minimize the
lamp and reflector brightness
CLR Clear flat lens.
HSS House side shield.
PT4 Post top fitter for a 4"/100mm
O.D. pole.
PCA-T Rotatable photocell housingtraditional
PCA-C Rotatable photocell housingcontemporary
EPA-T Egress-traditional
EPA-C Egress-contemporary
SCP Programmable motion control,
factory default is 50%, requires
pole
38.95"
38.95"
989
mm
Pole Mount - Arm mounts to side
of a 4" O.D. pole.
PSA-TU Fixture above with
arm mounted up.
PSA-TD Fixture above with
arm mounted down.
PSA-BU Fixture below with
arm mounted up.
PSA-BD Fixture below with
arm mounted down.
PM Pier mount (PKWB
only)
WT : 47 lbs. EPA 1.33
* DesignLights Consortium® Qualified
Please visit www.aal.net for mounting options.
HUBBELL LIGHTING
63
PROV
PRMN/PRMS/PRMD
Providence® Medium LED
Promenade™
• MicroCore TM technology
• Upgrade kits available
distributions
• IP66 optics
• DLC listed
PROV
•Features highly efficient, exclusive
MicroCoreTM technology
•Upgrade kits available
•DLC pending
•Features exclusive LifeShield®
Protection System
•0-10v dimming capabilities
•All cast aluminum construction and
stainless steel hardware
•IP66
–
MODEL
PROV Providence medium
housing scale
UPGRADE KITS - PROL-LK
T2, T3, T4, IES Type 2, 3, 4, 5,
distribution
Color Temperature
diodes
diodes
Ballast/Driver
current, 75 watts
current, 48 watts
Bezel Finish/Color
Bezel available in 13 standard finishes
and premium finishes (See Colors
section)
–
–
COLOR TEMPERATURE
3000K output
4200K output
5100K output
DRIVER
120 thru 277 volt
700 700mA drive
current, 75 watts
450 450mA drive
current, 48 watts
DISTRIBUTION
T2 Type 2
T3 Type 3
T4 Type 4
T5 Type 5
TL 45º Left
TR 45º Right
–
COLORS
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic Bronze
VBL Verde Blue
CRT Corten
MAL Matte
Aluminum
MDG Medium Grey
ATG Antique Green
LGY Light Grey
RAL/ Provide a RAL
COLOR number
matching
PRMN/PRMS/PRMD
–
OPTIONS
WIH In fixture wireless control
module.
SPK Decorative cast aluminum
spikes on the top and bottom
of the four vertical struts.
PFN Cast aluminum finial painted a
brass color.
BPS Cast aluminum struts painted a
brass color - spikes also painted
brass if option SPK chosen
LDL Lightly diffused lens. Frosted, flat
tempered glass lens has a lightly
diffused finish to minimize the
lamp and reflector brightness
CLR Clear flat lens
PCA-T Rotatable photocell housingtraditional
pole
DIMENSIONS
–
MODEL
PRMN PromenadeTM
PRMS PromenadeTM
PRMD PromenadeTM
UPGRADE KITS
PRMN-LK, PRMS-LK, PRMD-LK
COLOR TEMPERATURE
3000K output
4200K output
5100K output
T2, T3, T4, IES Type 2, 3, 4, 5,
distribution
Color Temperature
diodes
48LED-5K Bright White 5100K diodes
Ballast/Driver
current, 112 watts
current, 72 watts
DRIVER
120 thru 277 volt
700 700mA drive
current, 112 watts
450 450mA drive
current, 72 watts
DISTRIBUTION
T2 Type 2
T3 Type 3
T4 Type 4
T5 Type 5
TL 45º Left
TR 45º Right
DIMENSIONS
18.7 in
475 mm
–
–
–
–
COLORS
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic Bronze
VBL Verde Blue
CRT Corten
MAL Matte
Aluminum
MDG Medium Grey
ATG Antique Green
LGY Light Grey
RAL/ Provide a RAL
COLOR number
matching
OPTIONS
CHC Copper hood cover. PRMS & PRMN
only.
BHC Brass hood cover. PRMS & PRMN
only.
BPS Brass color painted struts. PRMS &
PRMN only.
CHM Glass chimney, with brass holder.
PRMS & PRMN only.
LDL Lightly diffused lens
PT5 Post top adaptor for a 5" O.D. pole.
PRMS & PRMN only.
MAT Cast adapter to mount to a 2 3/8”
O.D. mast arm. PRMD only.
WIH In fixture wireless control module.
FTG Flat glass lens in replacement of
standard acrylic drop lens. PRMD
only.
LDL Lightly diffused lens.
CLR Clear lens. PRMD only.
pole.
EPA-C Egress-contemporary
19"
19"
18.7 in / 475 mm
19"
18.7"
36"
36"
31.5
31.5 in / in
800 mm
800 mm
36"
36"
31.5"
PRMN
WT: 38 lbs. EPA: 2.75 IP: 66
Slip over 4" O.D. pole
WEIGHT: 29 lbs EPA: 0.96
PRMS
WT: 38 lbs. EPA 2.75
PRMD
36” x 19” DIA
WT: 34 lbs EPA: 2.10
64
HUBBELL LIGHTING
HUBBELL LIGHTING
65
ALN440/ALN445/ALN540
FGS/FGL
Federal Globe™ Small/Large Scale
Towne Common®
•Two fitter designs to accommodate
architectural requirements
•Available with highly efficient LEDs
- IES Type 2, 3, 4 or 5 distribution
- Three standard color temperatures: 3K, 4K or 5K
•Cutoff shield available to reduce
uplight
•Integrated hinged capital offers
tool-less access to lamp and ballast
compartments
•IP66
FGS/FGL
Energy Saving LED technology
Reliable efficient operation
Type 2, 3, 4, 5 distributions
0-10V dimming ready
LifeShield® protection system
Surge protection included
Wide variety of custom mounting
options including post-top, wall
•
•
•
•
•
mount or pole mount arm
IP66 optics
wiHUBB ready configurations
DLC pending
Available in 3000K, 4200K and 5100K
Powder coat finish in 13 standard
colors with polymer sealer
–
–
–
–
–
–
GLOBE STYLE
SAL Standard
Acorn
globe. Onepiece.
SLG Two-piece
globe. FGL
only.
MODEL
FGS Federal Globe Small.
Post top mount.
Slips over a 4" O.D.
pole.
FGL Federal Globe Large.
Post top mount.
Slips over a 5" O.D.
pole.
UPGRADE KITS
FGL-LK, FGS-LK
COLOR
TEMPERATURE
36LED-3K Warm White
3000K
36LED-4K Neutral White
4200K
36LED-5K Bright White
5100K
DRIVER
OPTICAL SYSTEM
120 thru 277 volt
FGL – LED (36 LED.
600 600mA drive
Available in 3 color
current, 73
temperatures: 3000K,
watts. For
4200K, 5100K.
FGL only.
Type 2
Y2
450mA drive
450
Type 3
Y3
current, 53
Type
4
Y4
watts. For
Type 5
Y5
FGS only.
FGS – LED (Available
Distribution (Class 2, 120 thru 277
volt)
Y2, Y3, Y4, IES Type 2, 3, 4, 5,
Y5 distribution.
Color Temperature
36LED-3K Warm White 3000K
diodes
36LED-4K Neutral White
4200K diodes
diodes
in 3 color temperatures: 3000K, 4200K,
5100K.
Y2
Y3
Y4
Y5
Ballast/Driver
current, 73 watts.
FGL only.
current, 53 watts.
FGS only.
Bezel Finish/Color
Bezel available in 13 standard
finishes and premium finishes
(See Colors section)
Type 2
Type 3
Type 4
Type 5
DECORATIVE STYLE
RB Rib Fitter Design
LF Leaf Fitter Design
DIMENSIONS
OPTIONS
17.5in/44.5mm
FGL
42in
1067mm
RB
WMA1M
WMA1L
WMA55
WMA56
WMA57
COLOR TEMPERATURE
3000K output
4200K output
5100K output
DRIVER
Y2, Y3, Y4, IES Type 2, 3, 4, 5,
Y5 distribution
Color Temperature
32LED-4K Neutral White 4200K diodes
32LED-5K Bright White 5100K diodes
120 thru 277 volt
700 700mA drive
current, 75 watts
450 450mA drive
current, 48 watts
Ballast/Driver
700 700 milliamp drive current,
75 watts
450 450 milliamp drive current,
48 watts
Bezel Finish/Color
Bezel available in 13 standard finishes and
premium finishes (See Colors section)
DIMENSIONS
Pole Mount
TRA1M
TRA1L
TRA55
–
–
DISTRIBUTION
Y2 Type 2
Y3 Type 3
Y4 Type 4
Y5 Type 5
TRA56
TRA57
ALN440
ALN445
RB
LF
1'—15 8 "
13.625in
346mm
Shown with SAL
LF
1'—15 8 "
13.625in
Shown with SAL
DECORATIVE346mm
RIB
RB
Rib Design
Shown with SAL
Rib Design
MOUNTING (FGS)
Wall Mount
–
MODEL
ALN440
ALN440 Arm or post top mount
ALN440D Top mounted arm or
pendant mount
ALN445 Arm or post top mount
pendant mount
ALN540PM Arm or post top mount
pendant mount
UPGRADE KIT
ALN440-LK, ALN440D-LK
ALN445-LK, ALN445D-LK
ALN540PM-LK, ALN-540D-LK
WT: 34 lbs.
EPA: 1.32 (LL3/5)
1.47 (PA3/5)
1.41 (SLG)
1.40 (SAL)
RB
42in
17.5in/44.5mm
1067mm
Shown with SAL
Rib Design
11.2"
285 mm
COLORS
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic
Bronze
VBL Verde Blue
CRT Corten
MAL Matte
Aluminum
MDG Medium Grey
ATG Antique Green
LGY Light Grey
RAL/ Provide a RAL
COLOR number
COLOR a color chip
for matching
17.5"
WT: 25 lbs.
EPA: 1.2 (LL3/5)
0.99 (SAL)
14"/356 mm
11.2"
285 mm
36"/914 mm
ALN440/ALN445/ALN540
–
ALN445
HEIGHT: 36”/915mm
LENGTH: 22”/560mm
WIDTH: 22”/560mm
WEIGHT: 52 lbs.
ALN440D
EPA: 3.45
ALN440
–
–
COLORS
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic
Bronze
VBL Verde Blue
CRT Corten
MAL Matte
Aluminum
MDG Medium Grey
ATG Antique
Green
LGY Light Grey
RAL/ Provide a
PREMIUM RAL 4 digit
COLOR color number
CUSTOM Please
COLOR provide a
color chip for
matching
ALN440D
ALN445D
ALN445D
HEIGHT: 31”/800mm
LENGTH: 22”/560mm
WIDTH: 22”/560mm
WEIGHT: 48 lbs.
EPA: 3.45
17.5in/44.5mm
FGS
36"/914 mm
–
FS1 Single Fuse Holder
(fuse by others)
FS2 Double Fuse Holder
(fuse by others)
TA3 Tenon adaptor slips over
a 3" O.D. by 4" long.
Secures to the pole with
four stainless steel set
screws.
TA23 Tenon adaptor slips
over a 2 3/8" O.D. by
4" long. Secures to the
pole with four stainless
steel set screws.
AD5 Adaptor to slip over a
5"/125mm O.D. pole
and is 4"/100mm long.
Secures to the pole with
four stainless steel set
screws.
ALF Cast filigree basket. For
SAL globe only.
COS Cut off shield - reduces
uplight. Factory
installed.
PHC Photo control kit.
Specify line voltage
when ordering this
option.
347 347VAC input
480 480VAC input
WIH Integral HBA wiHubb
IFM transceiver and
antenna
14"/356 mm
66
•
•
•
•
•
•
•
RB
LF
SAL
42in
1067mm
DECORATIVE RIB
Rib Design
HUBBELL LIGHTING
ALN440
ALN440
HEIGHT: 31”/790mm
LENGTH: 18”/460mm
WIDTH: 18”/460mm
WEIGHT: 40 lbs.
EPA: 2.80ALN440D
ALN440
LF
ALN440
ALN440D
ALN440D
OPTIONS
WIH wiHUBB enabled with integral ‘infixture’ module
CHM Glass chimney with polished brass
holder
CND 3-lamp candelabra with polished
brass holder, lamps included. For
decorative use only
SBL Sandblast diffused lens
HSS-L House side shield for use with
MAT
PMS
PMC
PT5
PT4
clear lens only, consists of three
field installed panels attached to
the inside of the lens. Installing
three panels blocks 180° of the
lens
Mast arm adapter slips over a
2 3/8”/ 60mm O.D. pipe and is
secured with 4 stainless steel set
screws. For Top mounted arm or
pentant mount only.
Pendant mount with 48”/1220mm
stem and canopy with swivel.
For Top mounted arm or pentant
mount only.
Pendant kit includes canopy and
48”/1220mm of brass chain. Top
mounted arm or pentant mount
only.
Post top adaptor for a 5”/127mm
O.D. pole. ALN 440 only.
Post top adaptor for a 4”/100mm
O.D. pole. ALN 445 only.
pole.
ALN540PM
HEIGHT: 35”/890mm
LENGTH: 18”/460mm
WIDTH: 18”/460mm
WEIGHT: 40 lbs.
EPA: 2.80
ALN440D
HEIGHT: 26”/660mm
LENGTH: 18”/460mm
WIDTH: 18”/460mm
WEIGHT: 35 lbs.
EPA: 2.59
ALN540PM
ALN540D
HEIGHT: 21”/520mm
LENGTH: 18”/460mm
WIDTH: 18”/460mm
WEIGHT: 35 lbs.
EPA: 2.59
ALN540D
Please visit www.aal.net for a complete listing of our poles/arms/accessories
HUBBELL LIGHTING
1'—15 8 "
13.625in
346mm
Shown with SAL
LF
67
SLVT
UCM/UCL
LargentTM
Universe Collection® – Medium/Large Scale
• IP66 optics
• Type 2, 3, 4, 5, Custom, Left & Right distributions
• First decorative, modular system with
precise LED aiming capabilities
• DLC listed
• IP66 optics
• DLC listed
• Powder coat finish in 13 standard colors with a polymer primer sealer
SLVT
–
MODEL
SLVT LargentTM
–
–
COLOR TEMPERATURE
3000K output
4200K output
5100K output
DISTRIBUTION
T2 Type 2
T3 Type 3
T4 Type 4
T5 Type 5
TL 45º Left
TR 45º Right
DRIVER
120 thru 277 volt
700 700mA drive
current, 75 watts
450 450mA drive
current, 48 watts
UCM/UCL
–
–
COLORS
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic Bronze
VBL Verde Blue
CRT Corten
MAL Matte
Aluminum
MDG Medium Grey
ATG Antique Green
LGY Light Grey
RAL/ Provide a RAL
COLOR number
matching
OPTIONS (Microcore only)
WIH Integral HBA w iHUBB IFM
LDL or HSS
LDL Lightly diffused lens. Not available
with CLR or HSS
HSS House side shield. Not available
with CLR or LDL
pole.
Wt: 32 lbs
EPA: 2.15
IP= 54
UCM Upgrade Kit – UCM-LK
For internal
illumination. Add 4
watts
UPLT
Distribution
–
–
MODEL
Universe Medium
Universe Large
UCM
UCL
transceiver and antenna
CLR Clear flat lens. Not available with
DIMENSIONS
SL VTH
DL
T2, T3, T4, T5, TL, TR
Color 32LED-3K, 32LED-4K,
32LED-5K
Driver 700 (700mA, 75
watts)
Bezel Fishes Available in 13
standard finishes and
premium finishes
UCL Upgrade Kit - UCL-LK
UPLT
For internal
illumination. Add 4
watts
Distribution
T2, T3, T4, T5, TL, TR
Color 56LED-3K, 56LED-4K,
56LED-5K
Driver 700 (700mA, 132
watts)
450 (450mA, 85
watts)
Bezel Fishes Available in 13
standard finishes and
premium finishes
–
HOOD
ANG
BEL
FLR
STR
SKB
Angled hood
Bell hood
Flared hood
Straight hood
Skirted bell
hood
LUMINOUS ELEMENTS
WND 4 luminous
windows
SR Solid rings
VSL Vertical slots
LUM Luminous rings
DISTRIBUTION
T2 Type 2
T3 Type 3
T4 Type 4
T5 Type 5
TL 45º Left
TR 45º Right
–
–
COLOR TEMPERATURE
UCM
3000K output
4200K output
5100K output
UCL
3000K output
4200K output
5100K output
DRIVER
120 thru 277 volt
UCM
700 700mA drive
current, 75 watts
UCL
700 700mA drive
–
COLORS
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic
Bronze
VBL Verde Blue
CRT Corten
MAL Matte
Aluminum
MDG Medium Grey
ATG Antique
Green
LGY Light Grey
RAL/ Provide a RAL
COLOR number
current, 132 watts
450 450mA drive
current, 85 watts
20 in
25.5 in
n
–
OPTIONS
OPTIONS - HOOD
Copper
COP
Stainless Steel
STS
OPTIONS
Integral HBA
WIH
wiHUBB IFM
transceiver and
antenna
Luminous
SLC
element
remains unlit
during normal
operation
Flat glass lens.
FTG
Lightly diffused
FLD
finish on flat
glass lens
Clear sag glass
SAG
lens. UCM
MicroCore
only.
Rock guard
RCK
painted black.
UCM only.
Lightly diffused
LDL
lens
PCA-C Rotatable
photocell
housingcontemporary
Programmable
SCP
motion control,
factory default
is 50%,
requires pole.
Please visit www.aal.net for mounting, dimensions, weight and EPA.
68
HUBBELL LIGHTING
HUBBELL LIGHTING
69
FH
PV
Flex™
Pivot® LED
distributions
• IP66 optics
• DLC listed
FH
–
–
FH Upgrade Kit – FH-LK
56LED
upgrade kit
Distribution T2, T3, T4,
T5, TL, TR
Color 56LED-3K,
56LED-4K,
56LED-5K,
Driver 700 (700mA,
132 watts)
450 (450mA,
85) watts
Bezel Fishes Available in
13 standard
finishes and
premium
finishes
DRIVER
120 thru 277 volt
700 700mA drive
current, 132
watts
450 450mA drive
current, 85
watts
DISTRIBUTION
T2 Type 2
T3 Type 3
T4 Type 4
T5 Type 5
TL 45º Left
TR 45º Right
70
HUBBELL LIGHTING
3000K, 4200K and 5100K CCT
0-10V dimming ready
Integral surge protection
Powder coat finish in thirteen
standard colors with a polymer
primer
• DLC QPL pending
•
•
•
•
MODEL
FH FlexTM
FH-LK
• Uses the same fixture modules
for individual or continuous row
applications
• Applications include floodlighting,
sign lighting, indirect lighting
• Orient as an uplight or downlight
• Wet location for exterior use in any
orientation
• Continuous rows feature an unbroken
wash of light with no shadows at the
fixture connections
–
–
COLORS
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic
Bronze
VBL Verde Blue
CRT Corten
MAL Matte
Aluminum
MDG Medium Grey
ATG Antique
Green
LGY Light Grey
RAL/ Provide a RAL
COLOR number
COLOR TEMPERATURE
3000K output
4200K output
5100K output
OPTIONS
WIH Integral HBA wiHUBB
IFM transceiver and
antenna.
CLR Clear flat lens.
LPC12 Photocell with
adjustable swivel for
aiming. 120 volt.
LPC27 Photocell with
adjustable swivel
for aiming.
208/240/277 volt
SCP Programmable
motion control,
factory default is
50%, requires pole.
PV
–
–
–
–
MOUNTING–REQUIRED OPTION
MODEL
MOUNTING
FA4 Attaches to the
FA5 Attaches to the side of a 5" pole
side of a 4" pole
Two individual arms can be mounted to a pole at a 180° orientation.
SHORT STRAIGHT ARMS (4" pole)
SHORT STRAIGHT ARMS WITH EXTENSION (4"/5" pole)
SS4/SS5 Short straight arm
SS4XP/SS5XP Short straight arm with an
extended post
TSS4/TSS5 Twin
TSS4XP/ TSS5XP Twin
PSS4/PSS5 3-way - T configuration
PSS4XP/ PSS5XP 3-way - T configuration
QSS4/QSS5 4-way, horizontal
QSS4XP/QSS5XP 4-way, horizontal position only
position only
LONG STRAIGHT ARMS (4"/5" pole)
LONG STRAIGHT ARMS WITH EXTENSION (4"/5" pole)
LS4/LS5 Long straight arm
LS4XP/ LS5XP Long straight arm, with an
extended post
TLS4/TLS5 Twin
TLS4XP/TLS5XP Twin
PLS4/PLS5 3-way - T configuration,
PLS4XP/PLS5XP 3-way - T configuration,
horizontal position
horizontal position only.
only.
QLS4/QLS5 4-way, horizontal
QLS4XP/QLS5XP 4-way, horizontal position
position
SHORT CURVED ARMS (4"/5" pole)
SHORT CURVED ARMS WITH EXTENSION (4"/5" pole)
SC4/ SC5 Short curved arm
SC4XP/ SC5XP Short curved arm with an
extended post
TSC4/ TSC5 Twin
TSC4XP/ TSC5XP Twin
PSC4/ PSC5 3-way-T configuration
PSC4XP/ PSC5XP 3-way-T configuration
QSC4/ QSC5 4-way
QSC4XP/ QSC5XP 4-way
LONG CURVED ARMS (4"/5" pole)
LONG CURVED ARMS WITH EXTENSION (4"/5" pole)
LC4/ LC5 Long curved arm
LC4XP/ LC5XP Long curved arm with an
extended post
TLC4/ TLC5 Twin
TLC4XP/ TLC5XP Twin
24" Housing Length. Diffused acrylic lens
End hub(s) (Set of two hubs for single
fixture or to terminate the ends of a
continuous row)
SHA Set of 2 brackets with one solid
and one 1/2”NPS threaded end
cap, used to terminate the ends
of a continuous row
HB Set of 2 end hubs and wall
plates
HBS Set of 2 end hubs and wall
plates
HBL-96 Set of 2 end hubs and wall
plates
HBC Set of 2 end hubs and wall
plates
TPN-U Fixture pointed up
TPN-D Fixture pointed down
TPN-S Fixture pointed up + down
Intermediate hub(s) (One hub to connect
two inline fixtures in a continuous row)
Bracket Arm 200° rotation
One intermediate bracket. Can
SHAX
be used in combination with
the HB arms
Very Short Arms 200° rotation
HBX One intermediate hub and wall
plate. Not available for 96"
configuration
Long Straight Arms 360° rotation
HBLX One intermediate hub and wall
plate
HBSX One intermediate hub and wall
plate
Curved Arms 360° rotation
HBCX One intermediate hub and wall
plate
HBLX One intermediate hub and wall
plate
An 8"/200mm center hub to pendant
mount two (2) individual fixtures of
any length. Fixtures can be oriented for
uplight or
downlight. All wiring is concealed within
the hub. The stem is 48"/1220mm long.
The ceiling canopy includes an internal
ball and socket assembly. The hub, stem
and canopy are painted to match the
fixture.
FIXED ARMS
PLC4/ PLC5 3-way-T configuration
QLC4/ QLC5 4-way
WALL MOUNT ARMS
WVSS Very short straight arm
WSS Short straight arm
WLS Long straight arm
WSC Short curved arm
WLC Long curved arm
PLC4XP/ PLC5XP 3-way-T configuration
QLC4XP/ QLC5XP 4-way
WALL MOUNT ARMS WITH EXTENSION
WSSER Short straight arm with
extension rods and wall plate
WLSER Long straight arm with
WSCER Short curved arm with
WLCER Long curved arm with
Hardware for properly mounting the arm and wall plate
(for extension rods) provided by others.
Please visit www.aal.net for mounting, dimensions, weight and EPA.
LED (5300 Series Light Engine, 60.3 watts)
PV-5350D-24
Bright white (5100K)
PV-5340D-24
Neutral white (4200K)
PV-5330D-24
Warm white (3000K)
PV-2850D-24
PV-2840D-24
PV-2830D-24
Warm white (3000K)
PV-5350D-48
PV-5340D-48
PV-5330D-48
Warm white (3000K)
PV-2850D-48
PV-2840D-48
PV-2830D-48
Warm white (3000K)
PV-5350D-96
PV-5340D-96
PV-5330D-96
Warm white (3000K)
PV-2850D-96
PV-2840D-96
PV-2830D-96
Warm white (3000K)
UPGRADE KITS
PV-LK-5350D-24 PV-LK-2850D-24
PV-LK-5340D-24 PV-LK-2840D-24
PV-LK-5330D-24 PV-LK-2830D-24
PV-LK-5350D-48 PV-LK-2850D-48
PV-LK-5340D-48 PV-LK-2840D-48
PV-LK-5330D-48 PV-LK-2830D-48
PV-LK-5350D-96 PV-LK-2850D-96
PV-LK-5340D-96 PV-LK-2840D-96
PV-LK-5330D-96 PV-LK-2830D-96
–
COLORS
AWT Arctic White
BLK Black
MTB Matte Black
DGN Dark Green
DBZ Dark Bronze
WRZ Weathered
Bronze
BRM Metallic Bronze
VBL Verde Blue
CRT Corten
MAL Matte Aluminum
MDG Medium Grey
ATG Antique Green
LGY Light Grey
RAL/PREMIUM Provide a RAL
COLOR 4 digit color
number
CUSTOM COLOR Please provide
8.0"/203mm
a color chip for
matching
8.0"/203mm
OPTIONS
EFW Optional end cap(s) if an
intermediate hub is used
at the end of a row. Two
caps are provided; one
solid and one with1/2"
NPS threads. The cap is
sealed with an o-ring for
a water tight connection.
Not for use with SHA.
SLD External lens shield
attaches to each end
cap. For uplight or
downlight. Available for
all individual fixtures,
continuous rows
SLD-24 for 24" long fixtures
SLD-48 for 48" long fixtures
SLD-96 for 9 6" long fixtures
DIMENSIONS
BRACKET ARM
SHA/SHAX
VERY SHORT ARMS
HB/HBX
11.0"/279mm
SHORT ARMS
HBS/HBSX
29.5"/749mm
LONG STRAIGHT ARMS
HBL/HBLX
20.0"/508mm
CURVED ARMS
HBC/HBCX
HUBBELL LIGHTING
71
GSL
Lumasquare NRG 4000
®
Ceiling/Canopy/Garage LED Luminaire
High Performance LED Indoor/Outdoor Lowbay Series
•Designed for a range of ceiling applications from eight to eighteen feet for
surface, box or pendant mount; Parking
garage, walkway or building canopies,
corridors, tunnels, large stairwells and
other cover applications; Two lumen packages and optical distributions make the
the GSL Series luminaire both versatile
and functional
•Vertically finned cast aluminum housing
for maximum heat dissipation ensuring
long component life and performance
• Wattage: 53.3w or 75w, >79 LPW
• IP65 luminaire rating, Listed to UL1598 for use in wet locations
• Field configurable symmetric and
asymmetric optic in a single SKU
• Gray powder coat paint finish
• CCT: 4000K (70 CRI)
• Lumens packages ranging from 4,300 – 6,000 with 15 or 21 LEDs
• Designed for 40° C ambient temperatures
• Designed for illumination of commercial
indoor/outdoor lowbay applications
including: mechanical rooms, retail,
covered loading docks and utility areas
• Rugged, die-cast housing has a durable
Powder coat paint finish available in
bronze, white, black and gray. Mounts
over recessed J-box and features two
convenient 1/2” side hubs for surface
conduit mounting
• Stainless steel vandal-resistant screws
standard
• Fully gasketed for weatherproof/bugproof integrity
• 4200K CCT (70 CRI) nominal and 5100K
CCT (67 CRI) nominal
• One-piece, injection-molded, clear prismatic acrylic refractor enhances space
with 10% uplight; High temperature
acrylic for reduced yellowing, uniform
light distribution and low glare
• Five year limited warranty
• 10KA, 10KV surge protector standard
Catalog Number
GSL
SERIES
®
NRG4-30LU-4K-BZ
NUMBER OF LEDS
GSL GSL ceiling/
canopy/garage
LED
Mounting
Wattage
Voltage
Lumens
Drive Current
Ceiling/conduit
70
120-277V
5872
700mA
DesignLights
Consortium
15L 15 LEDs
NRG4-30LU-4K-035-BZ
Catalog Number
Mounting
Ceiling/conduit
Wattage
35
Voltage
120-277V
Lumens
3355
Drive Current
350mA
NRG4-30LU-5K-035-BZ
Ceiling/conduit
35
120-277V
3543
350mA
NRG4-30LU-5K-BZ
Ceiling/conduit
70
120-277V
6122
700mA
21L 21 LEDs
1
For alternate housing finish change BZ to WH-White, BL-Black, GR-Gray
Equivalency
Series Number
72ING%S!
SAV
*
54%
*
SAVINGS!
GSL-15L
GSL-21L
MH
HPS
CFL
Delivered
Lumens
System
Watts
Lumens
Per Watt
Mounting Height
CCT
Voltage
Drivers/
Current
100w
100w
42w
4300
53.3
81
8-18 ft.
4000K
120-277V
1@700mA
150w
150w
2x42w
6000
75
80
8-18 ft.
4000K
120-277V
1@700mA
Series Number
Catalog Number
Description
Vandal shield
GSL-CS
Comfort shield, 10% reduction in output
Delivered Lumens
System
Watts
Lumens
Per Watt
Mounting
Height
Voltage
Drivers/
Current
70w
70w
30
3355
35
96
up to 16 ft.
120-277V
1@350mA
53%
NRG4-30LU-4K-BZ
100w
100w
85w
30
5872
70
84
up to 16 ft.
120-277V
1@700mA
65%
NRG4-30LU-5K-035-BZ
70w
70w
70w
30
3543
35
101
up to 16 ft.
120-277V
1@350mA
53ING%S!
NRG4-30LU-5K-BZ
100w
100w
85w
30
6122
70
87
up to 16 ft.
120-277V
1@700mA
*
SAV
REPLACEMENT PART
Catalog Number
Description
Replacement refractor kit
800-3289-0100
A
12.5” sq.
317.5 mm
B
B
12.0”
304 mm
C
5.2”
132 mm
Weight
13.8 lbs.
6.25 kg
DIMENSIONS
A
C
A
72
Number
of LEDs
70w
*
SAVINGS!
DIMENSIONS
IND
NRG4-30LU-4K-035-BZ
*
SAVINGS!
GSL-SPC
HPS
65%
*
SAVINGS!
ACCESSORIES
Equivalency
MH
HUBBELL LIGHTING
B
C
A
14” sq.
356 mm
B
8 1/8”
206 mm
C
4 3/4”
121 mm
Weight
13.9 lbs.
6.3 kg
HUBBELL LIGHTING
73
WGH
Perimaliter PGM3 PVL3
®
Perimeter Glass Wallpack
Glass and Polycarbonate LED Wallpacks
PVL3
PGM3
LED Product Partner
WGH-1LU-M
41w
1 X COB
120-277V
4
3547
87
5000K
Weight
lbs. (kg)
12.0 (5.4)
OPTIONS
WGH-110-4K-U-M
53w
110
120-277V
4
4888
92
4000K
12.0 (5.4)
1
140mA
Fusing (voltage determined by
voltage field) Single fusing only
120V, 277V or 347V
PC1 Button photocontrol, (Must
specify individual voltage)
BBU1,3 Integral battery for 120 or 277V
rated for -20˚C to 25˚C (Must
specify individual voltage)
SC02,4 Motion sensor On/Off control,
No light output when no motion
detected
SCP2,4 Programmable motion control,
factory default is 10%
WGH-225L-4K-U-L
97w
235
120-277V
4
10151
105
4000K
12.0 (5.4)
1
125mA
Catalog Number
30L
FAMILY
# LEDS
VOLTAGE1
CCT
PGM3 Glass Refractor
PVL35 Polycarbonate
30L
U 120V-277V
3K 3000K,
80 CRI
4K 4200K,
70 CRI
5K 5100K,
67 CRI
1 120V
Refractor
2 208V
3 240V
4 277V
DRIVE
CURRENT
BLANK 700mA
0353 350mA
FIXTURE
COLOR
F1
BZ Bronze
5
BL Black
WH White
GR Gray
PL Platinum
CC Custom
5 480V
F 347V
Color
1 Voltage specific option, designate in voltage field
2 0-10V fully adjustable dimming with automatic daylight calibration and different time delay settings, must order
minimum of one remote to program dimming settings, 120V or 277V only
3 BBU only available in 350mA, 120V or 277V only
4 PC option not applicable, included in sensor. For SCP, PC function turns on to lower setting until motion is detected
5 PVL3 only available in BZ Bronze fixture color
1
72%
*
SAVINGS!
54%
*
SAVINGS!
PGM3-30LU
PVL3-30LU
Wattage
SP Surge protector, 10KA 273 joules
Equivalency
CFL
Delivered
Lumens
System
Watts
Lumens
Per Watt
Mounting Height
CCT
Voltage
Drivers/
Current
250w
250w
–
up to 5,678
69
82
15-18 ft.
5100K
120-277V
1@700mA
–
Replacement lens/door PVL3
80033990104
Replacement lens/door PGM3
up to 5,337
72.7
73
15-18 ft.
40w driver, 700mA, 120V-277V dimmable, 2x = 700mA, 1x = 350mA
SCP-REMOTE2
Remote control for SCP option. Order at least one per project to program and control
A
950mA
System
Watts
Lumens
Per Watt
Mounting Height
CCT
Voltage
Drivers/ LED
Current
*
SAVINGS!
73% WGH-1LU-M
150w
150w
2x42w
3547
41
87
Up to 12 ft.
5000K
120-277V
1@950mA
78% WGH-110-4K-U-M
250w
250w
2x42w
4888
53
92
Up to 15 ft.
4000K
120-277V
1@140mA
76% WGH-225L-4K-U-L
400w
400w
N/A
10151
97
105
Up to 25 ft.
4000K
120-277V
1@125mA
5100K
120-277V
1@700mA
PBT-1
Description
Button photocontrol, 120V
PBT-234
Button photocontrol, 208, 240, 277V
SM106-SHIELD
Polycarbonate Shield for M Size
SM106-VISOR
Top visor for M Size
SM708-GUARD
Wire guard for L Size
DIMENSIONS
A A
C
C
A
 
9.0”
Mid-Size  229 mm
9.0”
 
Large  229 mm
 
C
A
B B
B
D
D
A
14 7/8”
378 mm
B
15”
381 mm
C
8”
203 mm
D
6 13/16”
173 mm
 
 
PVL3 
A
14 7/8”
378 mm
B
15”
381 mm
B
7.3”
184 mm
13.0”
330 mm
C
13"
330 mm
17.0"
432 mm
D
B
HUBBELL LIGHTING
LED Current
Delivered
Lumens
DIMENSIONS
74
Number
of Drivers
1
SM106-FRAME/GLASS Glass and door frame for M Size
SM708-FRAME/GLASS Glass and door frame for L Size
93044764
 
PGM3 
CCT
CFL
Catalog Number
Description
 
LPW
ACCESSORIES - Order Separately
REPLACEMENT PARTS - Order Separately
Catalog Number
200-0180-9904
Lumens
HPS
*
SAVINGS!
HPS
250w
Dist. Type
MH
Series Number
MH
250w
1
Voltage
Chip on Board LED
*
SAVINGS!
Equivalency
Number of LEDs
Series Number
•Cast aluminum frame holds lens, hinges
to side of medium housing and hinges
down on large housing; Seals with two
stainless steel screws
• Cast aluminum housing with three 1/2” conduit entries (on top and sides) for
button photocontrol or surface conduit
• All units have dark bronze powder paint
finish
•Two sizes: Medium and Large provides
energy-efficient one-for-one replacement of existing legacy technology
•Mid power offers lower glare, better
uniformity, higher efficiencies (up to 105
LPW) and lower thermals for longer lasting
electronic components
• Borosilicate glass refractor softens LED
and provides uniform distribution
• Medium size available in 4000K and 5000K
•Large size available in 4000K
• LEDs with CCT of 5100K, 4200K and 3000K
• Two cover options are available: A cast
aluminum with prismatic borosilicate glass
assembly (PGM3) and an all polycarbonate,
one-piece, vandal resistant door (PVL3)
• Typical mounting heights of 12-15
feet; The lateral spread allows typical
spacing of three to four times the mounting
height with excellent uniformity
• Available in two lumen outputs
• BBU integral battery option for 120 or 277V,
rated for -20˚C to 25˚C; designed to provide
minimum of 1fc in a 10' square at 10-12'
mounting height
• SCO/SCP - motion sensor on/off or user
programmable
WA L L PAC K S
•Perimeter lighting for safety, security and
general illumination - LED units provide
60-70% energy savings over typical pulse
start wallpacks. Uses include office buildings,
shopping centers, restaurants, schools, warehouses, parking garages and other commercial applications
• The die-cast aluminum housing provides firm
mounting over recessed junction boxes; ½”
side hubs for surface conduit wiring; Housing includes a top hub for use with button
photo controls for dusk-to-dawn control;
The construction not only provides a rigid
mount but an excellent heat sink for the LED
system, allowing proper operating temperature for optimum performance and long life
(50,000hr)
C
C 1/2" feed thru
D surface
hub conduit
8”
7 7/16”
203 mm
189 mm
HUBBELL LIGHTING
75
LNC2
LNC
Compact LED Wallpack
Compact LED Wallpack
installed. Fixtures have protective polyester
finish in five color choices.
• IES Progress Award Winner - 2013
• Building Operting Management 2014
Top Products Award - LNC2-18LU
• DesignLights Consortium (DLC) qualified, Consult DLC website for more
details: http://www.designlights.org/QPL
2014
LNC2-18LU
The compact LED LNC2 is designed for perimeter illumination for safety, security and general
lighting application. Slightly larger than the
LNC, the LNC2 has greater lumens and increased
performance. The LNC2 achieves up to 85%
energy savings over traditional metal halide.
Luminaires have no uplight and are neighbor
friendly with typical mounting height up to 15
feet and 60ft fixture spacing (without acrylic
diffuser) and 40ft spacing with acrylic diffuser
LNC2-BBU
LED Product Partner
The compact LED LNC is designed for perimeter
illumination, available in 3 lumen packages
for safety, security and general illumination
applications. This compact fixture is neighbor
friendly with zero uplight. Typical mounting
height up to 12 feet with 40ft fixture spacing
(without acrylic diffuser) and 30ft spacing with
acrylic diffuser installed. Photocontrol option is
available.
APPLICATIONS
Battery backup option in 12L versions for egress
applications – provides 1 fc average over 16' L x
48' W at 11' mounting height. Zero uplight, IDA
compliant entry/perimeter lighting. Listed to
UL1598 for use in wet locations. Features longlife (60,000hr L96 rated), high CRI, 3000K,
4200K, and 5100K LEDs. Single SKU designed
for both recessed box or surface conduit
wiring, includes quick-mount adapter for ease
of installation. Acrylic diffuser softens high
angle output for use at entrances or pedestrian
pathways.
NUMBER OF LEDS/SOURCE/VOLTAGE
CCT
7LU 7 LEDs, 18w input, Universal
3K 3000K nominal
9LU
12LU
4
18LU
12L5
12L6
voltage 120-277V
9 LEDs, 22w input, Universal
voltage 120-277V
voltage 120-277V
voltage 120-277V
12 LEDs, 29w input, 480V
12 LEDs, 29w input, 347V
IES DISTRIBUTION
FINISH
2 Type II
3
80 CRI
4K 4200K nominal
70 CRI
OPTIONS
3 Type III
2 Black
4 Type IV
3 Gray
control, replace
X with voltage,
specify 1-120V,
2-208V, 3-240V,
4-277V
BBU2 Integral battery
for 12L only (must
specify 120V or
277V voltage in
voltage category)
rated for -20˚C to
30˚C
4 White
5K 5100K nominal
5 Platinum
67 CRI
AM Amber (590 μm
1
Amber LEDs only available on 18LU configurations, 350 mA only;
Universal Voltage 120V-277V
Battery backup only available 12L models, not available for Canada
Does not qualify for DLC
Replace U with 1 for 120V or 4 for 277V for 12L with BBU
1
2
PC1 Button photo-
1 Bronze
3
LNC-5LU-5K
12.6w
5
120-277V
967
LNC-5LU-5K-PC
12.6w
5
120V
967
60,000hrs
available for
“Turtle Friendly”/observatory
applications,
350mA; consult
factory
WATTAGE
NUMBER OF LEDS
VOLTAGE
LUMENS1
SERIES
NUMBER OF LEDS/SOURCE/VOLTAGE
CCT
7LU 7 LEDs, Universal voltage
LNC Laredo
3
24'
3/4 VIEW
42'
CFL
System
Watts
Lumens
Per Watt
Mounting Height
CCT
Voltage
Drivers/
Current
LNC2-7LU-5K
70w
70w
42w
1,389
16.4
80
up to 11 ft.
5100K
120-277V
1@700mA
80%
LNC2-9LU-5K
100w
100w
42w
1,745
21.9
85
10-12 ft.
5100K
120-277V
36'
1@700mA
150w
150w
2x42w
2,420
28.6
85
Up to 15 ft.
5100K
120-277V
1@700mA
85%
LNC2-18LU-5K-3-1
150w+
150w+
2x42w+
3,311
42.3
78
Up to 15 ft.
5100K
120-277V
2@700mA
MH
24'
36'
12'
12'
12'
12'
24'
A
A
B
C
D
E
Weight Weight w/BBU
6.25"
1.6"
10.25"
5.6"
10.25"
7.0 lbs.
15.0 lbs.
158.7 mm 40.2 mm 260.4 mm 142.2 mm 260.4 mm 3.2 kg
6.8 kg
12'
Delivered
Lumens
24'
3 Gray
4 White
5 Platinum
control, replace
X with voltage,
specify 1-120V,
2-208V, 3-240V,
4-277V
42w
.2fc
System
Watts
Lumens
Per Watt
Mounting Height
CCT
Voltage
Drivers/
Current
12.8
75.5
up to 10 ft.
5000K
120-277V
1@700mA
24'
967
36'
36'
70w.5fc
42w
1,147
16.4
70
up to 11 ft.
5000K
120-277V
1@700mA
100w
42w
1,460
20.6
71
10-12 ft.
5000K
120-277V
1@700mA
.5fc
100w
1fc
24'
12'
CFL
.2fc
2fc
12'
12'
LNC-9L
HPS
50w
70w
2fc
85%
24'
50w
LNC-7L
36'
1fc
36' DIMENSIONS
36'
42'
A
D
DIMENSIONS
A
4.8"
122 mm
B
1.6"
39 mm
C
8.2"
209 mm
D
5.3"
133 mm
E
C
B
C
D
B
HUBBELL LIGHTING
85%
*
SAVINGS!
*
SAVINGS!
1fc
42'
42'
LNC2-12LU-5K-3-1
*
SAVINGS!
76
24'
80%
*
SAVINGS!
2fc
12'
85ING%S!
*
SAVINGS!
.2fc
.5fc
36'
24'
LNC-5L
42'
Equivalency
Series Number
85%
12'
HPS
2 Black
available for “Turtle
Friendly”/observatory
applications;
consult factory
DesignLights Consortium (DLC) qualified 5/7/9 models 4K and 5K only
*
SAVINGS!
12'
MH
1 Bronze
OPTIONS
PC(X)1 Button photo-
AM2 Amber (590 µm
When PC is ordered, input must match PC voltage
Amber LEDs are 035mA drive current
12'
FINISH
3 Type III
67 CRI
36'
Delivered
Lumens
4.0 (1.8)
4 Type IV
5K3 5000K nominal,
Equivalency
IES DISTRIBUTION
3K 3000K nominal,
80 CRI
4K3 4200K nominal,
70 CRI
120-277V
9LU 9 LEDs, Universal voltage
120-277V
Cut-off
42'
Series Number
5000K
Type III distribution. When using acrylic diffuser accessory lumen output is 650 with increased uniformity
Projected per IESNA TM-21-11
LNC
1
2
3
SIDE VIEW
5000K
WEIGHT
LBS. (KG)
4.0 (1.8)
CCT
ORDERING INFORMATION - LNC 7L/9L
LNC2 – BATTERY BACKUP
SAV
LNC-7LU
LNC-9LU
TM-21-11
L962
60,000hrs
CATALOG NUMBER
LNC2
*
LNC-5LU
ORDERING INFORMATION - LNC 5L
LNC2 Laredo
2
3
4
APPLICATIONS
Zero uplight, IDA compliant entry/perimeter
lighting. Listed to UL1598 for use in wet locations.
Features long-life (60,000hr L96 rated) high CRI
5000K LEDs, quick mount adapter and designed
for both recessed box or surface conduit wiring.
Additional CCT/CRI options available in the
larger 7L and 9L lumen packages.
LED Product Partner
LNC2
1
•
• IES Progress Award Winner - 2012
• Some models meet DesignLights Consortium
SERIES
(DLC) qualifications, consult DLC website for
more details:
With Battery Backup
HUBBELL LIGHTING
77
LXEM
LJT
LED Enclosed & Gasketed Fiberglass
LED Lensed Troffer
EXTREME ENVIORNMENT
•
•
•
LXEM
SIZE
2' 1,2,6,7
4'
8'
–
COLOR TEMP
30 3000K
35 3500K
40 4000K
50 5000K
SHIELDING
RFA Ribbed Frosted
RA
DFA
DCA
RFP
Acrylic
Ribbed Clear Acrylic
Deep Frosted Acrylic
Deep Clear Acrylic
Ribbed Frosted
Polycarbonate3
–
LW
ML
HL
VL
XL
DRIVER
E Fixed Output
ESD Step
Dimming2,4,5
ED 0-10V Dimming
VOLTAGE
U 120V- 277V
Low Watt
Medium Lumen
High Lumen1
Very High Lumen
Xtra High Lumen2,5
1
HL not available in 2' size with HT option.
Not available with battery pack.
2' and 4' only. 8' not available.
4
Only available on 4' and 8' LW and ML Lumen package.
5
Not available with HT.
6
Not available with XL lumen package.
7
Not available with VL lumen package.
8
Requires 3⁄8" OD threaded rod by others.
2
3
SENSOR KITS (Order Separately)
All sensor kits include Occupancy & Daylight.
Daylight activation requires setting of dip-switches on site.
Catalog #
# Relays Lens Type
Voltage
Wet Label
OS1360WLK
1
360°
120/277
Yes
120V/
OS2360WLK
2
360°
120/277
Yes
277V
OS1AWLK
1
Aisle
120/277
Yes
OS2AWLK
2
Aisle
120/277
Yes
SIZE
23⁄8"
43⁄8"
2'
63⁄4"
23⁄8"
4'
55⁄8"
DFA or DCA Lens: 2', 4', 8'
8'
20
HUBBELL LIGHTING
•
•
•
•
•
LJT
OPTIONS
•
•
•
•
•
•
•
•
ACCESSORIES
(ORDER SEPARATELY)
XEHC Chain Hanger Kit
(Includes 14" Chain)
XE45MB 45° Mounting Bracket
XE45MBSS 45° Stainless Steel
Mounting Bracket
–
MODEL
LJT LED Lensed
GLR Fast Blow Fuse
SSL Stainless Steel Tamper
Resistant Ready Latches
TP Tamper Proof Latches
ELL14 Emergency Battery
Pack Installed, 1400
Lumens1,6
F3C8W 3 Wire 8' Wet Cord
F3C15W 3 Wire 15' Wet Cord
SWH Single Wet Hub
1⁄2" NPT Hub
DWH Dual Wet Hub
1⁄2" NPT Hub
XEDPM Dual Pendant Brackets
(pendant by others)8
WIH wiHUBB Enabled
HT Elevated Ambient 1,2,6
Metal to metal light leak protection on all sides
of shielding frame
All models standard with IC rating
Recessed, surface, or cable mount
Low W/ft2 ratio typically meets the most
restrictive lighting power density codes
DesignLights Consortium® (DLC) qualified;
see www.designlights.org
Available with exclusive wiHUBB technology
preinstalled
QR code traceability
Five year warranty (Terms and Conditions apply)
–
COLOR TEMP
30 3000K
35 3500K
40 4000K
50 5000K
Troffer
SIZE
22 2' x 2'
24 2' x 4'
CEILING TYPE
G Grid1
SM Surface
Mount
CM Cable
Mount2
LUMEN OUTPUT
LW Low Watt
ML Medium Lumen
HL High Lumen
VL Very High
Lumen
XL Extra High
Lumen
See Product Availability
table below.
U
–
SHIELDING
A12 Pattern 12
Acrylic Lens
A12125 Pattern 12
A12F
A12125F
DOOR
FS White Flush
A19
Steel
A19F
FA White Flush
Aluminum
For more door
options contact
factory.
Acrylic Lens,
0.125" Nominal
Pattern 12
Frosted Acrylic
Lens
Pattern 12
Frosted Acrylic
Lens, 0.125"
Nominal
Pattern 19
Acrylic Lens,
0.156" Nominal
Pattern 19
Frosted Acrylic
Lens .156"
DRIVER
E Fixed Output
ESD Step Dimming
ED 0-10V Dimming
–
VOLTAGE
U 120V-277V
OPTIONS
C388
C488
C588
ELL14
GLR
G1
G2
G3
3-Wire Flex
4-Wire Flex
5-Wire Flex
Emergency Battery Pack
Installed, 1400 Lumen3,4
Fast Blow Fuse
Single Gasketing
(Door to Housing)
Double Gasketing
(G1 and Lens to Door)
Triple Gasketing
(G2 and Housing to Ceiling)
wiHUBB5,6
End of Row (SM/CM only)7
Intermediate (SM/CM only)7
WIH
EOR
INT
GTD Not Available
1
For drywall, order G with Flange Kit Accessory.
2
Order hanger accessories separately.
3
For compatibility with Dual-Lite LiteGear® inverters in lieu of EL Battery Pack, contact Hubbell Lighting Representative.
4
Not available with 2x2 Surface or Cable Mount.
5
Not available with Surface Mount ceiling types.
6
In-Fixture Module Antenna adds 2" to overall fixture height at power feed location.
7
Provides ends with wiring access for continuous row mounting.
ACCESSORIES
(ORDER SEPARATELY)
FK22 2' × 2' Single Flange Kit
FK24 2' x 4' Single Flange Kit
FKCR Flange Kit Row Adaptor
(All Sizes)
CM48Y2SC3F-KIT 48" Cable Mount Kit for
2' Wide CM Ceiling Type,
3 Wire Feed Cord
Damp Label - standard. IC Rating - standard.
PRODUCT AVAILABILITY
63⁄4"
78
•
–
LUMEN OUTPUT
RFA or RA Lens: 2', 4', 8'
RFP Lens: 2', 4'
Full distribution LED troffer
Direct replacement for 2x4 and 2x2 fluorescent
Long-life, 60,000 hour LEDs at L80 reduce life
cycle maintenance costs
Multiple lens options
Choice of two door frame options
Four color choices with excellent color
consistency and 82 CRI
Fixed output, step dimming, or 0-10V dimming
drivers available
Hinged optical system allows easy access to LED
modules and electrical from below the ceiling
•
–
MODEL
LXEM LED Enclosed 2
& Gasketed
4
8
FEATURES
•
LENSED TROFFERS
•
• Lens firmly secured with captive tamper
resistance ready polyacetal latches
• Stainless steel latching optional
• Removable gear tray electrical access
• Includes surface mounting brackets
• Operates from -40°C to 25°C
• Optional elevated ambient
• Installed battery pack optional
• DesignLights Consortium® (DLC) qualified;
• Available with exclusive wiHUBB technology
preinstalled
• Five year warranty (Terms and Conditions apply)
Available in 2', 4', or 8' lengths
Long life 60,000 hour LEDs at L80
Four LED color choices
IP65 all sizes, IP67 4' and 8'
IP66 all sizes when ordered with standard
polyacetal (POM) latches
Fiberglass housing with F1 weatherability
rating, standard
Wet label standard
Gasket is non-porous to ensure seal
Impact modified acrylic lens equivalent to
100% DR
LED EXTREME ENVIRONMENT
FEATURES
•
•
•
•
•
LUMEN
PACKAGE
NOMINAL LUMEN RANGE
(DFA LENS)
NOMINAL
WATTS
LUMENS/WATT
(HIGHEST)
MAX TEMP,
HT OPTION
LW
3150-3500
29
121
40°C
ML
4300-4750
43
110
40°C
SIZE
LUMEN
PACKAGE
LUMENS
WATTS
LPW
22
ML
3,200 - 3,450
35
92-99
HL
3,775 - 4,025
43
89-94
HL
4850-5350
51
105
25°C
LW
4050-4450
36
124
50°C
ML
4850-5350
47
114
50°C
HL
5800-6400
52
123
45°C
24
VL
4,250 - 4,550
51
85-91
LW
4,050 - 4,325
39
107-112
VL
7350-8150
68
120
40°C
ML
4,600 - 4,900
45
103-109
XL
9750-10750
102
105
25°C
HL
5,350 - 5,650
49
110-115
LW
8100-8900
72
124
50°C
VL
6,825 - 7,200
68
102-107
ML
9700-10700
94
114
50°C
XL
8,250 - 8,775
85
98-104
HL
11600-12800
104
123
45°C
VL
14700-16300
136
120
40°C
XL
19500-21500
204
105
25°C
Lumens vary according to color temperatures and other factors. See specific
photometric test(s). Output levels based on the DFA lens option.
4¼"
31⁄8"
24"
LJT24
24"
LJT22
25"
25"
45⁄8"
LJT22 SM or CM
33⁄4"
LJT24 SM or CM
Based on A12 lens, range represents 3000K through 5000K.
Lumens vary according to color temperatures and other
factors. See specific photometric test(s).
9
HUBBELL LIGHTING
79
LJL22
®
VersaBay LED High Bay
2’x2’, LED Troffer
FEATURES
•
•
•
•
•
•
•
FEATURES
Full distribution LED troffer
Direct replacement for fluorescent and HID 2x2
Long-life, 50,000 hour LEDs at L70 reduce life
cycle maintenance costs
Four LED color choices
Smooth Frosted Acrylic Lens developed
specifically for LED
Many shielding choices
Two door frame choices
Metal to metal light leak protection on all four
sides of shielding frame
•
•
•
•
•
Fixed output, step dimming (high/low/off), or
0-10V dimming drivers
All models standard with IC rating
DesignLights Consortium® (DLC) qualified
Available with exclusive wiHUBB technology
preinstalled
Five year warranty
•
•
•
•
•
•
22
MODEL
LJL LED Lensed
Troffer
–
COLOR TEMP
30 3000K
35 3500K
40 4000K
50 5000K
CEILING TYPE
G Grid1
CM Cable
Mount
2
U
–
SHIELDING
SFA Smooth Frosted
Acrylic Lens,
0.80” Nominal
(reduces lumen
output up
to 10%)
DRIVER
VOLTAGE
E Fixed Output
ESD Step Dimming
ED 0-10V Dimming
U 120V-277V
G3
Steel
FA White Flush
Aluminum
For more door
options contact
factory.
WIH
For hard ceilings use flange kit accessory; must have above ceiling access.
Order hanger accessories separately.
3
For compatibility with Dual-Lite LiteGear® inverters in lieu of installed
battery pack, contact Hubbell Lighting Representative.
4
Not available with Cable Mount.
5
In-Fixture Module Antenna adds 2” to overall fixture height at power feed location.
•
•
•
•
•
3-Wire Flex
4-Wire Flex
5-Wire Flex
(4) Bulk T-Bar Clips
Emergency Battery Pack
Installed, 1400 Lumen3,4
Fast Blow Fuse
Single Gasketing
(Door to Housing)
Double Gasketing
(G1 and Lens to Door)
Triple Gasketing
(G2 and Housing to
Ceiling)
wiHUBB5,6
–
–
COLOR TEMP
30 3000K
35 3500K
40 4000K
50 5000K
MODEL
LLHV VersaBay®
LED High
Bay
REFLECTOR
N Narrow
Distribution
ST
LUMEN OUTPUT
L Low Watt
M Medium Lumen
H High Lumen
UPLIGHT
ST Solid Top
DRIVER
E Fixed Output
ED 0-10V Dimming
ACCESSORIES (ORDER SEPARATELY)
LHVOS2360
C6TL15-120
Side panels increase height to 27⁄8".
Lens reduces max ambient operating temperature to 40°C; if
combined with ELL14 max is 30°C.
3
Side panels only; does not include lens or wire guard options.
4
ELL14 reduces max ambient temperature to 40°C. If combined
with lens max is 30°C.
5
In-Fixture Module Antenna adds 2" to overall fixture height
at specific location.
6
Not compatible if surface mounting.
C6TL15-277
2
NOMINAL
LUMENS
NOMINAL
WATTS
4¼"
LUMENS
PER WATT
HL
8,000
85
94
VL
16,000
170
94
Lumens vary according to color temperature and other factors.
For exact lumens and watts see specific photometric test(s).
24"
LJT22
VOLTAGE
U 120V-277V
347 347V
480 480V
(no uplight)
LHVTH
LHVWG4-4
LHVQM5
LHVQM10
LHVSPM5
1
U
–
W Wide Distribution
2' Wide CM Ceiling Type,
3 Wire Feed Cord
Damp Label - standard.
2’ x 2’
•
ACCESSORIES
(ORDER SEPARATELY)
FK22 2' × 2' Single Flange Kit
CM48Y2SC3F-KIT 48" Cable Mount Kit for
2
OUTPUT
•
Quick and simple hanging systems include chain,
tong or aircraft cable mounting
Tool-less access to wireway from below
"Plug and play" occupancy sensor, daylight sensor,
cord and plug
Wire guard and/or lens option
DesignLights Consortium® (DLC) qualified;
CSA listed and suitable for damp locations
Up to 45°C ambient operation
Five year warranty (Terms & Conditions apply)
LHVSP
LHVOS1360
1
Size
C388
C488
C588
TB4
ELL14
G2
DOOR
FS White Flush
SIZE
4 4'
OPTIONS
GLR
G1
Lumen
See Product Availability
table below.
LLHV
LLHP 4
–
LUMEN OUTPUT
HL High Lumen
VL Very High
22 2' x 2'
•
ORDERING
ORDERINGINFORMATION
INFORMATION
–
SIZE
Optical design provides one-for-one replacement
of metal halide and fluorescent high bays with
substantial energy savings
High efficacy LEDs provide up to 119 lumens
per watt
Available in narrow or wide distribution
Long-life, 60,000 hour LEDs at L80 (projected over
100,000 hours) for reduced life cycle
maintenance costs
Easy center driver cover allows tool-less access to
electrical components for modular replaceability
Extremely low profile—only 2" overall height
INDUSTRIALS
LENSED TROFFERS
•
LJL
LLHV
C6P15-120
Tong Hanger (Pair)
Wireguard, White
Aircraft Cable, 5' (Pair)
Aircraft Cable, 10' (Pair)
Single Point Mounting,
Includes Pair of 5' Aircraft
Cables
Side Panels (Pair)
Occupancy/Daylight
Sensor, with a 360° lens,
120/277/347V
Occupancy/Daylight
Sensor, with a 360° lens,
120/277/347V
Cord and Plug Kit (white),
6 ft., Twist Lock NEMA
L5-15P, 15 amp, 120V
6 ft., Twist Lock NEMA
L7-15P, 15 amp, 277V
6 ft., Straight Blade NEMA
5-15P, 15 amp, 120V
163/16"
OPTIONS
C6TL15_ 6' Cord and Twist-Lock™ Plug 15A
(Add Voltage: 1=120, 2=277)
C6TL20_ 6' Cord and Twist-Lock™ Plug 20A
C6P151
CA
CP
SFA
CAWG
CPWG
SFAWG
SP
WG
ELL14
FAC5
GLR
OS1360
OS2360
OS1A
OS2A
(Add Voltage: 1=120, 2=277)
6' Cord and Straight Blade Plug 15A, 120V
Clear Acrylic Lens1,2
Clear Polycarbonate Lens1,2
Smooth Frosted Acrylic Lens
Clear Acrylic Lens and Flat Wire Guard1,2
Clear Polycarbonate Lens and Flat Wire
Guard1,2
Smooth Frosted Arcylic Lens and Flat Wire
Guard
Side Panels Installed1,3
Flat Wire Guard1
Emergency Battery Pack Installed, 1400
Lumens4
4-Conductor Cord
Fast Blow Fuse
Factory Installed Occupancy/Daylight,
Sensor, 1-relay, 360° lens 120/277
Factory Installed Occupancy/Daylight,
Sensor, 2-relay, 360° lens 120/277
Factory Installed Occupancy/Daylight
Sensor, 1-relay, Aisle lens, 120/277
Factory Installed Occupancy/Daylight
Sensor, 2-relay, Aisle lens, 120/277
ODS1360 Factory Installed Dimming Occupancy/
Daylight Sensor, 1-relay, 360° lens
120/277
ODS1A Factory Installed Dimming Occupancy/
Daylight Sensor, 1-relay, Aisle lens
120/277
NYC NYC Compliant
WIH wiHUBB Enabled5,6
163/16"
2"
2"
LUMEN
PACKAGE
NOMINAL LUMENS
(5000K)
NOMINAL
WATTS
L
12,000
109
LLHV L/M NST
M
18,000
155
163/16"
H
24,000
236
Lumens vary according to color
temperatures and other factors. See
specific photometric test(s).
–
LLHV H NST
163/16"
2"
LLHV L/M WST
2"
LLHV H WST
19
80
HUBBELL LIGHTING
HUBBELL LIGHTING
81
LF6LED8G4
D2LED
6" LiteFrame LED Open Downlights
2" LED Downlight & Wall Wash
Remote phosphor LED system in 3000K, 3500K, 4000K
120V or 277V High Output Xicato XSM LED Module
FEATURES
• 70 Lumens per watt delivered
• Glare free optical control
• Shipped with pre-installed Light Commercial bar hangers. (See below for optional Commercial grade bar hangers)
LED
• Minimum 50,000 hour at 70% lumen maintenance system life
• ENERGY STAR qualified
LF6LEDG4
• Photometrics tested per IESNA-LM-79-2008 standards
• Non-IC rated. Suitable for wet locations and through wiring (Damp location for EM)
• Available with exclusive wiHUBB technology preinstalled
LED
FEATURES
• Light Engine with integral heat sink provides excellent thermal management and a
minimum of 50,000 hours at 70% lumen maintenance
• Utilizes Xicato XSM Remote Phosphor LED module. Color consistency < 2 SCDM
• Non-IC rated. Suitable for wet locations
• Output compared to a 26/32 watt CFL or 50 watt MR16 Halogen
• Completely accessible from below the ceiling
• Luminaires are certified by a National Recognized Testing Lab (NRTL), either UL or CSA.
• Light Engine utilizes Philips Fortimo remote phosphor technology for controlled color consistency fixture to fixture
D2LED
EXAMPLE: LF6LED8G4-6LFLED8G430KWHWT
-
LF6LED8G4
HOUSING
VOLTAGE
OPTIONS
LF6LED8G4 6" High
120 120V
277 277V
3472 347V
Blank Standard
Efficacy
LED
Housing
0-10V
dimming
2 Lutron
HDM
3-wire/Eco
System to
1%
2 Lutron
2DM
2-wire
Leading
Edge to
1% (120V
only)
WIH wiHUBB®
Enabled
30K
6LFLED8G4
TRIM
Kelvin,
80 CRI
35K 3500
Kelvin,
80 CRI
40K 4000
Kelvin,
80 CRI
REFLECTOR
COLORS
Blank Clear Alzak
CG Champagne
AM4
B6
Gold Alzak
BL Black Alzak
WE Wheat Alzak
LW Light Wheat
BEAM ANGLE
LFSC6
Alzak
Blank Nominal
FL355
NCT3
Gasket (factory
installed)
Non Conductive
Trim
Antimicrobial
coating on
reflector
PW Pewter
45 degree
cutoff
Nominal
35 degree
cutoff
WH1
SCA6D
Alzak
White Paint
Signos6
NOTES
9 1/8"
12 3/4"
1
Requires WT option
2
347V not available with HDM & 2DM
3
See spec sheet for details
LiteGear
4
Clear Alzak standard. Consult factory for other colors.
5
NCT not available
two(2)
24" bar
hangers
for T-bar
ceilings
Set of two
(2) bar
hangers
for ceiling
joist up
to 24"
centers
6" reflector screw
cover
Sloped
ceiling
adapter
(see note
on spec
sheet)
Architectural
glass
elements.
Refer to
specification
sheets
ARCHSIG-001
and -003
See spec
sheet for
availability
2D9LED
J-TUBE
ASSEMBLY
B24 Set of
WT White Trim
TRG Trim Ring
SemiDiffuse
D2LED
ACCESSORIES
REFLECTOR
OPTIONS
Blank Alzak
30K 3000
-
WT
REFLECTOR
FINISH
LED
COLOR
TEMP
6LFLED8G4 3000
Lumen
module
WH
EXAMPLE: D2LED277V-2D9LEDHDM9L30K8MD25
30K
LIGHT ENGINE
LED COLOR
2D9LED 2" Open
27K 2700
Assembly
with 0-10
Dimming
standard
BEAM ANGLE
reflector with a
45º wide flood
distribution
MD25 Spun Aluminum
reflector with
a 25º medium
distribution
FL35 Spun Aluminum
reflector with a 35º
flood distribution
WW Wall Wash
30K 3000
Kelvin
35K 3500
Kelvin
40K 4000
VOLTAGE
Kelvin
Blank 120V
OPTIONS
277 277V
Blank Standard
0-10V
dimming
HDM5 Lutron Series
A Driver. HiLume 3 wire
or EcoSystem
dimming
to 1%
CP
7
OUTPUT
9L2 900
Delivered
Lumens
12L2,5 1200
Delivered
Lumens
MD25
WFL45 Spun Aluminum
Kelvin
Reflector/
Light
Engine
Assembly
D2LED 2" J-Tube
8
REFLECTOR
COLORS
REFLECTOR
OPTIONS
Blank Clear Alzak
CG Champagne
WT White trim
Champagne Gold
D2ICAT
4,5
Alzak
PW Pewter Alzak
BL Black Alzak
WH1 White paint
CRI
REFLECTOR FINISH
82 Nominal 80+ CRI
92,5 Nominal 95+ CRI
Blank Specular
SS Semi-specular
MFC6 American
NOTES
Black
Wheat
Frame for D2LED
fixture
Optional IC Rated,
Air Tight housing
for the D2LED
Matte™
Chicago Plenum standard
0-10V dimming. Consult
factory.
Pewter
availability
D2FRM4 Optional Mounting
Gold Alzak
WE Wheat Alzak
LW Light Wheat
1
Requires WT option
2
See spec sheet for specific lumens per module and raw
lumens
See spec sheet or www.prescolite.com for LiteGear Compatibility Matrix
See spec sheet for line art
3
Clear
ACCESSORIES
LiteGear See spec sheet for
4
Light Wheat
5
ICAT not available with 95 CRI, HDM, or 12L
6
Not available with white paint
7
Must order D2ICAT accessory when choosing “CP” option.
See notes 4 & 5
2-3/4"
5"
14"
2-3/4"
9 1/8"
12 3/4"
7 3/4"
10"
1 1/4"
STANDARD
FL35
2-3/4"
AA
HDM: 16-1/4"
2-7/8"
6-1/2"
CEILING
CUTOUT*
2-1/2"
7-3/4"
HDM: 16-1/4"
2-1/2"
2-7/8"
CEILING
6-1/2"
CUTOUT*
2-7/8"
CEILING
2-1/4"
CUTOUT*
2-1/4"
3-1/8"
5 3/4"
7"
5"
3-1/8"
9-1/2"
6-3/4"
9-1/2"
HDM:
18”
HDM: 18"
14"
30°
LF6LED8G4
342
HUBBELL LIGHTING
7 3/4"
10"
STANDARD
FL35
5-1/4"
0-10V DIMMING
KNOCK-OUT
0-10V DIMMING
2-3/4"
KNOCK-OUT
0-10V DIMMING
KNOCK-OUT
LINE VOLTAGE
CONDUIT
OPENING
LINE VOLTAGE
2-1/2"
CONDUIT
6-1/2" OPENING
LINE VOLTAGE
2-7/8"
CONDUIT
CEILING
OPENING
CUTOUT*
9-1/2"
HDM: 18"
*Note: The accuracy of the 2-7/8" ceiling
cutout is critical to the proper fit of the A2LED.
For installation hints see page (3) of spec sheet
3-1/8"
*Note: The
accuracy
sheet
from of the 2-7/8" ceiling
or download the instruction
REFLECTOR DIMwww.prescolite.com
A cutout is critical to the proper fit of the A2LED.
For
installation
hints see page (3) of spec sheet
5-7/8"
30°WFL45
or download the instruction sheet from
FL35
6-3/4"
www.prescolite.com
MD25
7-1/2"
2-1/4"
82
5"
7-3/4"
HDM: 16-1/4
7-3/4"
REFLECTOR
A
WFL45
5-7/8"
FL35
6-3/4"
7-3/4"
HDM: 16-1/4"
MD25
WW
7-1/2"
0-10V DIMMING
KNOCK-OUT
2-1/2" 7"
9-1/2"
HDM: 18"
LINE VOLTAGE
CONDUIT
OPENING
2-1/4"
3-1/8"
30°
*Note: The accuracy of the 2-7/8" ceiling
cutout is critical to the proper fit of the A2LED.
For installation hints see page (3) of spec sheet
or download the instruction sheet from
www.prescolite.com
HUBBELL
197
LIGHTING
83
MD8LED
LF6LED8G4
8" High Lumen LED Downlight
6" LiteFrame LED Wall Wash Downlights
120V-277V High Output
FEATURES
FEATURES
• Light Engine with integral heat sink provides excellent thermal managment and a minimum of 50,000
hours at 70% lumen maintenance
• Light Engine utilizes Philips Fortimo remote phosphor technology for controlled color consistency fixture to fixture
• Utilizes Nichia LEDs. Color consistency 3 SCDM
• 70 Lumens per watt delivered
• Up to 40ºC (104ºF) Ambient Conditions
• Shipped with pre-installed Light Commercial bar hangers. (See below for optional Commercial grade bar hangers)
LED
• Up to 75 lumens/per watt
• Photometrics tested per IESNA-LM-79-2008 standards.
• Luminaires are certified by a National Recognized Testing Lab (NRTL), either UL or CSA
• Available with exclusive wiHUBB technology preinstalled
12L
MD8LED
HOUSING
MD8LED 8" High
Output
LED
Housing
OUTPUT
3L2 3000
9L
2
12L
2
LF6LED8G4
• Non-IC rated. Suitable for damp locations and through wiring
MD8LED
6L2
LED
• 4 Beam Spreads- 25º, 35º, 45º, 55º
Delivered
Lumens
6000
Delivered
Lumens
9000
Delivered
Lumens
12000
Delivered
Lumens
EXAMPLE: MD8LED12L 35K8- 8MD12LWFL45WCCL-B24
–
8
35K
LED COLOR
TEMP
27K 2700
CRI
8 80+ CRI
30K
VOLTAGE
Blank 120V-
35K
40K
50K
Kelvin
3000
Kelvin
3500
Kelvin
4000
Kelvin
5000
Kelvin
OPTIONS
Blank Standard
HDM
277V
2DM
WIH
DM1
0-10V dimming
Lutron
Series A
3 Wire/
EcoSystem
Dimming
Lutron
Series A
Trailing
Edge
Dimming
(120v
only)
WiHUBB
enabled
0-10V
Dimming
to 1%
8MD
12L
TRIM
APERTURE
8MD 8" Alzak
Reflector
OUTPUT
3L2 Suitable
6L
2
9L2
12L2
for 3000
Lumen
Housing
Suitable
for 6000
Lumen
Housing
Suitable
for 9000
Lumen
Housing
Suitable
for 12000
Lumen
Housing
WFL45
WC
BEAM ANGLE
MD25 Nominal
REFLECTOR
COLORS
Blank Clear
25 Degree
Cutoff
FL35 Nominal
35 Degree
Cutoff
WFL45 Nominal
45 Degree
Cutoff
XFL55 Nominal
55 Degree
Cutoff
REFLECTOR
FINISH
Blank Specular
SS Semispecular
20-3/4"
CG
BL
WE
LW
PW
BC1
WC1
Clear
Pewter
11-3/4"
Black
NOTES
1
11-3/4"
Wheat
Must specify either WT or BT for
15-3/8" painted cone
2
Champagne Gold
CL
Alzak
Champagne
Gold Alzak
Black
Alzak
Wheat
Alzak
Light
Wheat
Alzak
Pewter
Alzak
Painted
Black
Cone
Painted
White
Cone
20-3/4"
Light Wheat
Housing and reflector output must
be consistent
–
B24
REFLECTOR
OPTIONS
CL Clear Lens
over LEDs
(wet location)
SL Solite
Softening
Lens over
LEDs (wet
location)
WT Painted
White
Flange
BT Painted
Black
Flange
LF6LED8G4
EXAMPLE: LF6LED8G4WW-6LFLED8G430KWHWTWW
WW
-
HOUSING
VOLTAGE
OPTIONS
LF6LED8G4 6" High
120 120V
277 277V
3473 347V
Blank Standard
Efficacy
LED
Housing
0-10V
dimming
Wall Wash
WW
HDM3 Lutron
2
3-wire/ Eco
System to
1%
3 Lutron
2DM
2-wire
Leading
Edge to
1% (120V
only)
WIH wiHUBB®
Enabled
30K
6LFLED8G4
TRIM
LED
COLOR
TEMP
6LFLED8G4 3000
Lumen
module
WH
REFLECTOR
FINISH
Blank Alzak
SemiDiffuse
30K 3000
Kelvin,
80 CRI
35K 3500
Kelvin,
80 CRI
40K 4000
Kelvin,
80 CRI
WTWW
REFLECTOR
COLORS
Blank Clear Alzak
CG Champagne
Gold Alzak
BL Black Alzak
WE Wheat Alzak
LW Light Wheat
Alzak
REFLECTOR
OPTIONS
WW2 Wall Wash
WT White Trim
TRG Trim Ring
Gasket
(factory
installed)
WF Wide Flange
PW Pewter
Alzak
WH1 White Paint
ACCESSORIES
B24 Set of
two (2)
24" bar
hangers
for T-bar
ceilings
B6 Set of two
(2) bar
15-3/8"
hangers
for ceiling
joist up
to 24"
centers
SCA8D_ Sloped
ceiling
adapter
-
ACCESSORIES
B24 Set of
two(2)
24" bar
hangers
for T-bar
ceilings
B6 Set of two
(2) bar
hangers
for ceiling
joist up to
24" centers
Signos6 Architectural glass
elements.
Refer to
specification sheets
ARCHSIG-001
and -003
LiteGear See spec
sheet for
availability
NOTES
1
Requires WT option
2
WW option required on both housing and trim
3
347V not available with HDM or 2DM
"A"** 12" 13-1/4"**
20-3/4"
7-3/4"
9"
"A"** 12" 13-1/4"**
11-3/4"
15-3/8"
7-3/4"
9"
84334H U B B E L L
LIGHTING
"A"** 12" 13-1/4"**
REFLECTOR*
25°
35°
45°
55°
HEIGHT (A)
18"
15"
11"
10"
*WITH LENS ASSEMBLY
REFLECTOR*
25°
35°
45°
55°
HEIGHT (A)
18"
15"
11"
10"
*WITH LENS ASSEMBLY
**Dimension “A” may or may not be
limiting vertical dimension depending
upon chosen reﬂector.
LF6LED8G4 WW
343
HUBBELL LIGHTING
85
MC10LED
LF8LED8G4
10" High Lumen LED Downlight
8" LiteFrame LED Open Downlights
120V-277V High Output
featUreS
LED
•Suitableforinterior,damplocations.
MC10LED
Ordering infOrmatiOn
P
mC10Led
eXamPLe:mC10LedP12L35K8WfL45CL26BL
12L
Housing
mC10Led 10" High
Output
LED
Cylinder
mounting
P Pendant
S Surface
CCm Cord&Cable
Mount
35K
lED color
tEmp
27K 2700 Kelvin
30K 3000 Kelvin
35K 3500Kelvin
40K 4000Kelvin
50K 5000Kelvin
WfL45
cri
8 80+ CRI
options
Blank Standard
voltagE
Blank 120V-
Hdm
277V
2dm
output
3L
6L
9L
12L
8
3000 Delivered Lumens
dm1
WiH
0-10V
dimming
to 10%
Lutron
3Wire/
EcoSystem
to 1%
Lutron 2
WIre Leading Edge
Dimming
to 1%
Osram
dimming
to 1%
0-10V
WiHUBB®
enabled
CL
BEam anglE
md251 Nominal
rEflEctor
colors
Blank Clear
25Degree
Cutoff
fL35 Nominal
35Degree
Cutoff
WfL45 Nominal
45Degree
Cutoff
XfL55 Nominal
55Degree
Cutoff
Cg
BL
We
LW
rEflEctor
finisH
Blank Specular
SS Semi-
PW
BC
specular
WC
Alzak
Champagne
Gold Alzak
Black
Alzak
Wheat
Alzak
Light
Wheat
Alzak
Pewter
Alzak
Painted
Black
Cone
Painted
White
Cone
BL
26
options
Blank No
Lens
CL Clear
Lens
SL Solite
Lens
Housing
30 30"
Housing
-
HOUSING
VOLTAGE
OPTIONS
LF8LED8G4 8" High
120 120V
277 277V
3472 347V
Blank Standard
Efficacy
LED
Housing
color
Ba2 Brushed
BZ
BL
WH
Z
LF8LED8G4
EXAMPLE: LF8LED8G4-8LFLED8G430KWHWT
LF8LEDG4
lEngtH
26 26"
LED
FEATURES
• Light Engine utilizes Philips Fortimo remote phosphor technology for controlled color
consistency fixture to fixture
• 70+ Lumens per watt delivered
• Shipped with pre-installed Light Commercial bar hangers. (See below for optional
Commercial grade bar hangers)
• ENERGY STAR qualified
• Non-IC rated. Suitable for wet locations and through wiring (Damp location for EM)
• L ightEnginewithintegralheatsinkprovidesexcellentthermalmanagmentandaminimumof50,000hoursat
70% lumen maintenance
• UtilizesNichiaLEDs.Colorconsistency3SCDM
• Upto30ºC(86ºF)AmbientConditions
• 4BeamSpreads-25º,35º,45º,55º
• Upto75lumens/perwatt
• PhotometricstestedperIESNA-LM-79-2008standards.
•LuminairesarecertifiedbyaNationalRecognizedTestingLab(NRTL),eitherULorCSA
0-10V dimming
WIH WiHUBB®
Enabled
HDM2 Lutron 3-wire/
Eco System 1%
2DM2 Lutron 2-wire
Leading Edge
to 1% (120V
only)
30K
8LFLED8G4
TRIM
8LFLED8G4 3000
Lumen
module
WH
LED COLOR
TEMP
30K 3000
Kelvin,
80 CRI
35K 3500
Kelvin,
80 CRI
40K 4000
Kelvin,
80 CRI
Aluminum
Bronze
Matte
Black
Matte
White
Zet
REFLECTOR
FINISH
-
WT
REFLECTOR
OPTIONS
Blank Alzak
WT White Trim
TRG Trim Ring
SemiDiffuse
coating on
reflector
MD25 requires 30" housing
Blank Clear Alzak
CG Champagne
PW
WH1
2
Standard with black accents
CEILING/SURFACE
MOUNT (S)
B6
REFLECTOR
COLORS
LFSC8
Gold Alzak
Black Alzak
Wheat Alzak
Light Wheat
Alzak
Pewter Alzak
White Paint
SCA8D
Signos8
NOTES
1
B24 Set of
Gasket
AM3 Antimicrobial
BL
WE
LW
nOteS
ACCESSORIES
LiteGear
1
Requires WT option also
2
347V not available with HDM or 2DM
3
Clear Alzak standard. Consult factory for other colors
two(2) 24"
bar hangers
for T-bar
ceilings
Set of two
(2) bar
hangers for
ceiling joist
up to 24"
centers
8" Reflector
screw cover
Sloped ceiling adapter
(See note
on spec
sheet)
Architectural glass
elements.
Refer to
specification sheets
ARCHSIG-005 and
-007
See spec
sheet for
availability
PENDANT MOUNT (P)
8" Dia.
6-1/2" Dia.
2-1/4"
18"
CEILING/SURFACE
MOUNT (S)
PENDANT MOUNT (P)
1"
8" Dia.
Brushed aluminum
cylinder finish
matte Black
cylinder finish
6-1/2" Dia.
Dim "A"
2-1/4"
Dim "B"
18"
1"
Bronze
cylinder finish
matte White
cylinder finish
9-1/8"
Dim "B"
12-3/4"
9-3/4"
Dim "A"
Dim "B"
10" Dia.
Dim "B"
DIM “A”
Zet
cylinder finish
DIM “B”
LIGHTING
23-1/2”
7-3/4"
9"
26-7/8”
1-1/4"
5"
14"
10" Dia.
86344H U B B E L L
26” HOUSING 30” HOUSING
25-3/4”
29-1/8”
DIM “A”
DIM “B”
26” HOUSING 30” HOUSING
25-3/4”
29-1/8”
23-1/2”
26-7/8”
339 87
HUBBELL LIGHTING
Recommended DLC
Qualified Product Solutions
Hubbell Lighting is guided by an experienced management team with
dedicated employees focused on Hubbell Lighting being recognized as the
best lighting company in the industry through a market driven strategy.
ARCEOS
The company is committed to achieving excellence in all facets of its
operations with major emphasis on new product innovation, superior
customer support and industry leading training.
Site Furnishings
Signs
Benches
Waste Receptacles
Bike Racks
www.beaconproducts.com
88
HUBBELL LIGHTING
HUBBELL LIGHTING
89
A Complete Collection Of Energy Saving Solutions
Hubbell Lighting makes change easy with our comprehensive suite of createchange®
tools and services available at HubbellLighting.com/solutions/retrofit/ that include audit
tools, easy to use calculators and a wealth of additional information to support making
your project a success.
UP TO
Interior
60%
Controls
ENERGY SAVINGS
UP TO
70%
LJT LED Troffer
ENERGY SAVINGS
Exterior
Cimarron LED
UP TO
80%
ENERGY SAVINGS
Making Change Happen
wiSTAR
Ready to get started? For personal assistance, contact your local Hubbell Lighting
representative and we’ll help guide you through improving your lighting system and
creating change or email us at [email protected].
HubbellLighting.com/solutions/retrofit/
RETROFIT LIGHTING & CONTROLS SOLUTIONS
Easy Search Product Finders
Audit and Installation Tools
Multiple Calculators and Resources for Proposal Development
HLI-wide DLC and Energy Star Product Finders with Rebate Info
Vertical Market Tools aligned to Markets that Matter in the Retrofit Market
Financing Platforms to Support Closing Projects
Calculators
Online Proposal Generator
HVAC Impact Calculator
Maintenance Calculator
Productivity Calculator
Financing Calculator
Reference Tools
Audit Tools
DLC Qualified Product Lookup
Energy Star Lookup
Utility Rebate Finder
Watt Finder
Compare-In-The-Air Sample Program
Financing
RETROFIT LIGHTING & CONTROLS SOLUTIONS
90
HUBBELL LIGHTING
HUBBELL LIGHTING
91
Cash Flow Positive
Financing for Lighting Projects
• A Hubbell Lighting Financing Program to support project closure with a focus on
energy-saving retrofit applications
• For Commercial or Municipal/Government Applications
• Flexible financing platforms that can be customized to meet customer and
distributor specific needs
• Include all project costs in the financing package including labor and other
materials
• Easy-to-use calculators estimate monthly payments and cash flow scenarios
• A simplistic and rapid application process that is flexible to the size of the project
and the customer’s credit risk
Cash Flow Positive Benefits
POSITIVE CASH FLOW
Energy cost savings that are greater than your monthly financing costs
yield positive cash flow to your bottom line immediately.
COMPREHENSIVE FINANCIAL LEVERAGE
We can help you benefit from local utility rebate incentives and leverage that savings
into your lighting energy savings to add positive cash flow to your business.
TOTAL PROJECT FINANCING
Hubbell Lighting looks at the project costs holistically, including the lighting equipment,
upfit and installation labor, ancillary supplies and even recycling costs.
SMART MONEY FEATURES
•
•
•
•
•
•
•
•
•
Flexible terms (Commercial 12-72* months) (Municipal 12-120* months)
Competitive rates
Large and small projects $5,000 to $10,000,000
100% financing
No down payment
No minimum financing requirement
No hidden costs
Flexible prepayment provisions
Flexible debt structure around customer requirements by using lines of credit, escrow
accounts or progress payments
*Subject to the useful life of the asset as required by the Internal Revenue Service and
creditworthiness of the borrower.
CONVENIENT APPROVAL PROCESS
• Our Hubbell Lighting Financing Team is your direct contact
• 24-48 hour credit underwriting after application submission with required financial
data
• Hubbell Lighting handles all documentation and administration
ADDITIONAL CASH FLOW POSITIVE BENEFITS FOR MUNICIPAL CUSTOMERS
•
•
•
•
CASH CONSERVATION
Preserving your operating capital and your bank line of credit gives you more flexibility
in running your business.
92
HUBBELL LIGHTING
Standard Non-Appropriations Clause for state and local government entities
Utilize your tax-exempt status as specified by Internal Revenue Code,
Section 103
Can also save sales tax and personal property tax. Interest rates are generally lower
than commercially available rates
CASH FLOW POSITIVE TOOLS
•
•
•
•
Commercial and Municipal customers brochures
Online Calculators
Online Proposal Generator
Credit Application
HUBBELL LIGHTING
93
701 Millennium Blvd.
Greenville, SC 29607
hubbelllighting.com
ALERA LIGHTING
ARCHITECTURAL AREA LIGHTING
BEACON PRODUCTS
COLUMBIA LIGHTING
COMPASS PRODUCTS
DEVINE LIGHTING
DUAL-LITE
HUBBELL BUILDING AUTOMATION
HUBBELL INDUSTRIAL LIGHTING
HUBBELL OUTDOOR LIGHTING
KIM LIGHTING
KURT VERSEN
LITECONTROL
PRESCOLITE
PROGRESS LIGHTING
SPAULDING LIGHTING
SPORTSLITER SOLUTIONS
STERNER
WHITEWAY
HLOI-0023 01/15 NADA Brochure

Auto Dealership Solutions Guide

Transcription

Similar documents

EcoBOX™ Datasheet

ProSeries 1 and ProLED Series 1

SS420 - Synapse Wireless

10 Case study, Crowne Plaza hotel

Cultural Venues

zurn yacht

7 Case Study, JCT600 Car showroom, Castleford

TAVARUA ISLAND, FIJI

SLIGO VIEW APARTMENTS….. 641 Houston Avenue Takoma Park