rh scales co., 73 years of wheel experience!

Transcription

WHEELS AND RIMS • HUB COVERS
Team up with Hayes . . .
PASSENGER & LIGHT TRUCK WHEELS
Hayes Wheel has the most complete line of
wheels available-for import or domestic cars;
compact or full size; front or rear drive; light truck
and trailer applications.
Safety and performance inspectionWhenever you replace a tire, check for wheel
damage that might require replacement.
Snow wheel convenienceMount snow tire on a set of their own
“snow wheels” . . .save time and effort and
changeover time.
Compact spare replacementFor the motorist who rolls in on a compact
spare and wants the security of a full-size
tire and wheel.
PlusWheels for all types of trailers . . utility and
cargo trailers, boat trailers, horse trailers
and travel trailers.
R. H. SCALES CO., 73 YEARS OF WHEEL EXPERIENCE!
HUB COVERS
All Weather Wheel Covers
Top quality durable wheel covers for use
with snow tires and wheels, or to dress up
your passenger car or light truck.
Heavy Duty ABS Construction
Specially formulated ABS to endure extreme
temperatures. High quality brushed silver finish.
Sold individually
Styles may vary
850713S - 13” Directional Silver
85414S - 14” 8 Spoke Silver
85415S - 15” 9 Spoke Silver
32116SHD - 16” 10 Spoke Silver
32117SHD - 17” 10 Spoke Silver
238
WHEELS AND RIMS
STEEL TRUCK WHEELS & RIMS
RIMS
The rim supported the tire. There are two types of rims: a single piece rim (tubeless-some16 inch
single piece rims are either tubeless or tube-type) and a multi-piece rim (tube type). A SINGLE PIECE
RIM is a continuous one-piece assembly. A MULTI-PIECE RIM is an assembly consisting of a base
and either a side ring or a side and lock ring depending on the type. A DEMOUNTABLE RIM does not
have a center disc and is clamped onto a cast spoke wheel.
TUBELESS DEMOUNTABLE RIM
(SINGLE PIECE)
TUBE TYPE DEMOUNTABLE RIM ASSEMBLY
((MULTI-PIECE)
SPACER BAND
Used on rear cast spoke wheels, the spacer band holds the two rims apart and provides proper dual
spacing for the tires.
DISC WHEELS
A combination of a rim and a disc permanently attached to the rim and attached to the hub by studs
and nuts.
TUBE TYPE DISC WHEEL ASSEMBLY
TUBELESS DISC WHEEL
(2 mounting systems - see below)
Tubeless Disc Wheels Can Have a:
CHARACTERISTICS Outer dual
Inner dual
Hub pilots
Hub-piloted wheels
use two-piece
flange nuts
Non-chamfered
bolt holes identify
a hub-piloted
wheel.
Two-piece
finger
nuts
Studs
Hub
Or
Outboard brake
drum
Cross section of typical dual
assembly with hub-piloted
wheels (Both right hand and left
hand threads)
CHARACTERISTICS Outer dual
Inner dual
Outboard brake drum
Stud-piloted
wheels use nuts
with ball seat.
Inner cap nuts
are used to locate
inner dual in dual
wheel assembly
Chamfered bolt
holes identify a
stud-piloted
wheel
239
Hub
Outer cap nuts
Cross section of
Inner cap nuts typical dual assembly
with stud-piloted
wheels (Both right
hand and left hand
threads)
Studs
WHEELS AND RIMS
TRUCK WHEEL ATTACHING PARTS
STUDS AND NUTS FOR DISC WHEELS
Typical examples of studs, nuts and clamping plates used with disc wheels are illustrated in this section.
A typical stud (Fig.1) used with in-board brake drums has a thread on both ends, a shoulder with two flats,
and is longer from the shoulder on the one end with an unthreaded section. The flat surfaces of the
shoulder fit into the recessed outer surface of the hub to keep the stud from turning. The smooth portion
is long enough to fit through the brake drum, and is then held in place by a back or jam nut (Fig.2). For
outboard brake drums a serrated stud with threads on one side is typically used (Fig. 3).
On front stud mount wheels, an outer cap nut (Fig.4) or (Fig.6) is used. On stud mount rear dual
wheel applications, the inner wheel is held in place by an inner cap nut (Fig.5) and the outer wheel by
an outer cap nut (Fig.6).
For hub mount wheels which pilot from the center hole, flange nuts are used on both the front and rear
wheels. One-piece flanged cap nuts (Fig.7) are used on light truck and medium truck applications. Heavy
trucks and buses and some light trucks use a two-piece flange nut or swiveling lug nut (Fig.8) when hub
mount wheels are used. Some light trucks use a clamping plate (Fig.9) and 90 degree cone nuts (Fig.10)
for both the front and rear wheel. Light trucks which use single wheels on the front and rear axle require
90 degree cone nuts or 60 degree cone nuts (Fig.11), depending on the truck manufacturer.
RIM CLAMPS, STUDS AND NUTS FOR DEMOUNTABLE RIMS
The stud for cast spoke wheels (Fig.12), threaded on both ends, is installed in a threaded hole at the
end of a spoke. The front clamp (Fig.13) and a rear clamp(Fig.14) hold the demountable rim in position with studs and nuts (Fig.15). A clamp for a three-spoke wheel with two stud holes is shown in
(Fig.16).
240
WHEELS AND RIMS
ALUMINUM WHEELS
LIGHT TRUCK WHEELS
Alcoa is America’s largest manufacturer of forged aluminum wheels. Aluminum wheels are manufactured
either in a “casing” or “forging” process. Alcoa produces
forged aluminum wheels. Forged aluminum wheels are
stronger than cast or steel wheels.
The forging process of an Alcoa wheel starts with an hot
aluminum ingot, shaped under pressure, then machined
and polished to perfection.
Alcoa wheels are not just for 18 wheelers. Alcoa now
offers a full-line of forged aluminum wheels for light
trucks, sport vehicles, RV’s and vans.
Light truck owners know the quality of Alcoa wheels and
want Alcoa wheels and accessories on their truck.
15”, 16”, & 19.5” light truck wheels
available.
HEAVY TRUCK WHEELS
The right wheel for your mounting needs.
Whether your fleet runs on ball seat or hub-piloted wheels... or
you’re considering super weight saving wide base wheels...
you can get the Alcoa wheels you need right now. That’s
because only Alcoa makes aluminum wheels for every major
mounting type.
Stud or hub pilot 22.5” & 24.5” truck wheels
available.
Stud or hub pilot 22.5” wide base wheels available.
NO-MAR RIM GUARD
Fits 10 Hole 22.5, 24.5 Disc Wheels
Prevents impact wrenches from leaving damaging
grooves in aluminum, chrome or painted truck wheels.
Made of flexible high impact nylon.
MFR. NO.
DESCRIPTION
NMRG
NO-MAR Rim Guard
Wheel caps, lug nuts, & nut covers in stock now - see pg. 242
241
LIGHT & HEAVY TRUCK WHEEL ACCESSORIES
FRONT HUB CAPS, SNAP IN
(for stud & hub pilot, steel and aluminum 22.5” & 24.5” duals)
PART #
DESCRIPTION
4-4
4-4H
4-5
4-5H
4-6
4-6N
fits 8 23/32”pilot diameter, 4 notches on back rim of cap
same as above, has cutout in center of cap for hubodometer
fits 8 23/32” pilot diameter, 5 notches on back rim of cap
fits 8 23/32” pilot diameter, 6 “evenly spaced” notches on back rim of cap
same as above, 6 notches on back rim of cap unevenly spaced
FRONT HUB CAPS, LUG MOUNTED
PART #
DESCRIPTION
2S
2SH
44US
94
64UE
64UEOE
REAR AXLE COVERS
(for light, medium, & HD trucks, steel & aluminum duals)
22.5” & 24.5”, 10 on 11.25” or 10 on 285.75mm bolt patterns
USE KA4-4
17.5”, 19.5”, 20”, 22.5”, 6 on 8.75” bolt pattern
19.5”, 20”, 22.5”, 10 on 7.25” bolt pattern
16” & 16.5”, 8 on 6.5” bolt pattern (simulated lug nut covers)
same as above, with cutout for 4WD axle (simulated lug nut covers)
(derby style for lt., medium, & HD trucks, steel & aluminum duals)
PART #
DESCRIPTION
5US
5USH
5U8
45US
95
65UE
22.5” & 24.5”, 10 on 11.25” or 10 on 285.75mm bolt patterns
19.5”, 22.5”, & 24.5”, 8 on 275mm bolt pattern
17.5”, 19.5”, 20”, 22.5”, 6 on 8.75”, bolt pattern
19.5”, 10 on 7.25” bolt pattern
16” & 16.5”, 8 on 6.5” bolt pattern (simulated lug nut covers)
LUG NUT COVERS
PART #600
Installation Tool for Hub Cover
Systems 076185, 076188 and
077188
PART #
DESCRIPTION
NC1000
NC1000T
NC1012D
NC1014
NC1016F
NC1018F
NC1030F
NC1033F
NC1041
NC1078F
H150 (=L004)
H180 (=L005)
H181
H188
1” hex stainless steel- older GMC light trucks
1” hex stainless- later model GMC light trucks (taller for longer stud)
1 1/2” hex stainless- “Budd” wheels w/ double cap nuts (stud pilot)
1 1/4” hex chromed stainless- “Dayton” style rim clamp nuts
1 1/16” hex flanged stainless- 84+ Ford light trucks
1 1/8” hex flanged stainless- GMC, Ford, Dodge 1 pc. flanged nut
30mm hex flanged stainless- GMC medium duty (19.5”)
33mm hex flanged stainless- 10h unimount (hub pilot) wheels
41mm hex stainless- medium duty import trucks w/ double cap nuts (stud pilot)
7/8” hex flanged stainless- older GMC, late model Ford light trucks
1 1/2” hex Alcoa “Hug-A-Lug” spring loaded cover- “Budd” wheels (stud pilot)
35mm hex Alcoa “Hug-A-Lug” spring loaded cover- Unimount wheels (hub pilot)
33mm hex • 31mm High Cover Chrome
33mm threaded with inner threaded clamp ring (for 076188, 077188 kits)
COMPLETE ALCOA HUB COVER SYSTEMS
PART #
DESCRIPTION
076188
077188
076155
077155
1
1
1
1
REAR AXLE END HUB COVERS
steer axle cap & 10-L005 nut covers for unimount front wheel
drive axle cap & 10-L005 nut covers for unimount rear wheel
steer axle cap & 10-L004 nut covers for “Budd” front wheel
drive axle cap & 10-Loo4 nut covers for “Budd” rear wheel
(for stud and hub pilot, steel and aluminum 22.5” & 24.5” duals)
PART #
DESCRIPTION
9
9H
11
11H
universal 8 1/2” axle
same as above, has
universal 8 1/2” axle
same as above, has
242
end cover, use with 5/8” drive flange studs
cutout in center of cap for hubodometer
end cover, use with 3/4” drive flange studs
cutout in center of cap for hubodometer
WHEEL SIMULATORS & COVERS
DUALLY WHEEL SIMULATORS
These wheel simulators for dual wheels are manufactured by Kaper II, Inc., one of the original pioneers in
the industry, and are made of “bright” polished no. 304 stainless steel. Limited Lifetime Warranty
PART #
1602F-UE
1604-C35
WHEEL SIZE/BOLT PATTERN
16”/16.5”, 8 on 6.5”
16” 8° on 6.5”
STYLE**
2WD lug mt.
lug mounted
1604-EZN
1604-4F92
1604-6P
1610-EZN
29223ULT
29579-ULT
29583ULT
16”, 8 on 6.5”
16”/16.5”, 8 on 6.5”
16”, 6° on 222mm
16”, 10° on 7.25”
16” 8° on 170mm
16”, 8° on 6.5”
16” 8° on 170mm
2WD, 4WD OTL
4WD, OTL
lug mounted
over the lug
lug mounted
over the lug
lug mounted
APPLICATION
front or tag axle, F, Ch, Dg. (2 covers)
fits Accu-Ride ‘01+ Chevy NBS 29588,
29361 (x45477)
Universal, Fits most applications
Ford (92+), custom fit
fit medium duty import trucks (FS28860)
Ford (88+), custom fit, Super Duty
fits Accu-Ride ‘02 & earlier Ford Super Duty
Ford E-350 w/ 8 rd. cutouts on wheel
fits Accu-Ride ‘03 plus Ford Super Duty
29837ULT
17” Dual 8 on 170 mm
2WD, 4WD OTL
05+ Ford F350
1954I
1954-10N-1
1958-4ULTG
1958-4ULTI
29186ULT
29584ULT
29736ULT
29839ULT
19.5 6° on 222mm
19.5”, 5/10 on 7.25”
19.5”, 8 on 275mm
19.5”, 8 on 275mm
19.5 x 6
8 on 225mm
19.5 x 6
8 on 225mm
19.5 x 6.75”, 8 on 225mm
19.5 x 6
10 on 225mm
lug mounted
lug mounted
over the lug
over the lug
lug mounted
lug mounted
over the lug
2WD, 4WD OTL
fits Accu-Ride #29506
P-30 & Class A motorhomes
GM/Ford w/ 30mm hex lugs
IH, Freightliner, Ford w/ 32mm hex lugs
fits Accu-Ride #29186 ‘99-02
fits Accu-Ride ‘03+ Ford Super Duty
‘99 Ford SuperDuty
05+ Ford SuperDuty
2252FC-82
2252RC-82
2254C-7510
22.5x8.25”, 10 on 11.25”
22.5x8.25”, 10 on 11.25”
22.5x7.50”, 10 on 11.25”
lug mounted
lug mounted
lug mounted
fits Accu-Ride #27404, fronts
fits Accu-Ride #27404, rears
fits Accu-Ride #27403
2452FC-82
2452RC-82
24.5x8.25”, 10 on 11.25”
24.5x8.25”, 10 on 11.25”
lug mounted
lug mounted
fits Accu-Ride #27406, fronts
fits Accu-Ride #27406, rears
** the “Style” Column refers to how the simulator is mounted on the wheel; “lug mount” simulators are actually held
on by the lug nuts of the vehicle, while “over the lug” (OTL) simulators are held on by a series of lock nuts threaded on to the end of the vehicle’s studs
RING MOUNT SIMULATORS
Kaper’s unique and patented ring mount system, can be used on both dual wheels & rims, and is installed
using an expanding and locking ring inside the wheel’s rim contour. Front styles have a highly positive offset (like a front “Budd” type) and the rear style has a less positive offset to imitate a rear drive or trailer
application. Security screws hold the cover in place.
PART #
175F
175R
195F
195R
225F
225R
DESCRIPTION
17.5”
17.5”
19.5”
19.5”
22.5”
22.5”
rims/wheels, front style, mod style
rims/wheels, rear style, mod style
wheels, front style, mod style
wheels, rear style, mod style
rims/wheels (including wide base), front style, 2HH
rims/wheels (including wide base), rear style, 2HH
16” “EAZZY ON” WHEEL COVERS
“Eazzy On” covers are for single wheel applications and are made of highly polished stainless steel. They
attach using a 360 degree retention ring, that is sure to hold on all applications.
PART #
DESCRIPTION
16EZN
16” wheels, universal for trucks/trailers (except Ford F-350)
243
WHEEL ADAPTERS
REAR DUAL WHEEL ADAPTER (CONVERSION) KITS
DUAL WHEEL ADAPTER INSTALLATION
Typical 2 or 4 wheel drive
Please Note: Use only Hayes, & Accu-Ride steel or Alcoa Aluminum wheels.
The use of any other wheel will void manufacterer’s warranty!!
NEW
!
EXISTING AXLE
HUB
FRONT
4.1
2”
TIRE & WHEEL
EXISTING AXLE
HUB
REAR
3.00”
TIRES & WHEELS
Now, you can convert your 2WD or 4WD 3/4 or 1 ton truck with single wheels to a factory style dual wheel
truck. This adapter kit will add stability to any former single wheel truck to aid in plowing, load carrying,
towing, etc. However, it will not increase the vehicle’s load carrying capacity (total GVW), DO NOT OVERLOAD!!!!
Kits include two aircraft aluminum spacers and sixteen grade 8 heat treated 9/16” studs & nuts. All kits are
custom machined for specific applications, so every kit fits safely and precisely.
PART #
3000D
3001
3001A
3002
3003
3099
REMA
DESCRIPTION
94’ - up Dodge
86-98 Ford
Pre 86 Ford - pre 88 Chevy
88-00 Chevy
01 + Chevy NBS
99 + Ford SD 8-170mm
Tool to bore out hooks on 7529186
Note: Stock rear kits only, all front kits special order, approximately one week lead time.
244
RUBBER/ POLYMER PRODUCTS
THERMO FLEX FENDER GUARD - SINGLE WHEELS
Buyers thermo-flex fender guards are produced with a high - density polymer developed specifically for strength and stability. These splash guards
are designed with a flare to confirm to the truck or trailer body.
Polymer Fender Splash Guards
PART NO.
COLOR
B1018PPB
B1237PPB
Black - Small
Black
SIZE
18L x 10W
37L x 12W
HEAVY DUTY RUBBER SPLASH GUARD - DUAL WHEELS
Buyers heavy duty rubber splash guards are produced with all rubber for greater strength and longer
wear. These splash guards are available in a variety of sizes to fit most trucks and trailers.
Heavy Duty Rubber Splash Guards 1/4" Thick
PART NO.
STYLE
B2018LSP
Plain
SIZE
20" L x 18" W
HEAVY DUTY RUBBER WHEEL CHOCK
Designed for unusually heavy loads. Built to OSHA standards. Convenient molded handhold & chain
eye.
PART NO.
WC2556A
DESCRIPTION
Heavy duty rubber wheel chock
SIZE
7” W x 8” L
RUBBER WHEEL CHOCK
Wheel chocks are made of tough, reinforced rubber. Resistant to sun, salt, oil and acid. Practically
indestructible .
PART NO.
WC1468
WC1467
WC1468
WC1467
WC1086
DESCRIPTION
Rubber wheel chock
Rubber wheel chock
Rubber wheel chock
with metal eye bolt
WC1086
245
SIZE
8” W x 5” x 6”
5” W x 5” x 6”
9” W x 8” x6”
TIRE REPAIR MATERIAL
PATCHES, PLUGS & ACCESSORIES
RAD100 SERIES RADIAL REPAIR UNITS
Rema Tip Top’s famous RAD100 Series Radial Repair Units, another member of Rema’s Blue
Bonding SystemTM, revolutionized radial tire repair. With far better adhesion power than most other
repair systems and an extensive range of sizes, Rema RAD100 Series Radial Repair Units can be
cold or hot vulcanized, making them an ideal choice for tire dealers, retreaders or fleets. RAD100
Series repair units are specially constructed to absorb and disperse high flex forces. When used with
Special Cement BL, the center-over-injury repair units become a dynamic part of any radial tire.
STOCK NO.
SIZE
RAD-110
RAD-112
RAD-114
RAD-120
RAD-122
RAD-124
RAD-125
RAD-126
RAD-128
RAD-135
RAD-140
2x2 3/4”
2 3/8x4 1/8”
3x4 3/4”
4 7/8x3”
6 7/8x3”
8 1/2x3”
4 1/2x4 7/8”
2 7/8x10 1/2”
2 7/8x13 1/8”
5 1/4x7 1/4”
7 7/8x3 15/16”
PLIES
UNITS/BOX
CAR
1
1
1
2
2
2
3
3
3
4
3
20
10
10
10
10
10
10
10
10
10
10
•
•
•
TRUCK
•
•
•
•
•
•
•
•
REMA MINICOMBI REPAIR UNITS & ACCESSORIES
Rema Tip Top’s most popular repair unit, Minicombi sets a new standard in one-piece repair units,
making complete permanent nail hole repairs on passenger, performance, light truck and truck tires
simple and easy. Part of Rema’s renowned Blue Bonding SystemTM, Minicombi features a metal pilot
guide for easy installation and seating. Specially developed for tread area punctures on both radial
and bias ply tires, Minicombi should be used with Special Cement BL.
STOCK NO.
OLD STOCK NO.
DESCRIPTION
UNITS/BOX
A3
670
1/8” Minicombi A3
A6
673
1/4” Minicombi A6
A6-R
673RP
1/4” Minicombi A6
A-36 KIT
676
Minicombi Combo Kit (25 A3s & 20 A6s)
B8-MC
680
5/16” Minicombi B8
B10
684
3/8” Minicombi B10
CC-3
6456
1/8” Carbide Cutter
CC-6
6451
CC-8
6459
CC-10
6450
Special Cement BL, 50gm Tube
BL-5
BL-8
Special Cement BL, 8 oz. Brush Top Can
See Cutters, Buffing Tools, Rasps & Finishing Stones sections for specially designed Combi Cutters.
50
40
8
1
20
18
1
1
1
1
1
24
PN BIAS PLY TIRE REPAIR UNITS
Designed specifically for everything from nail hole to section repairs of bias ply tires, Rema’s PN Bias
Ply Tire Repair Units, another member of Rema’s exclusive Blue Bonding SystemTM, can be used with
either a cold or hot vulcanizing process and will deliver reliable and durable adhesion, regardless how
they’re applied. Because they have a high temperature resistance, PN Repair Units are ideal for
retreading systems. With high tensile nylon cords for maximum patch strength and exceptional flexibility, easy-to-install unidirectional PN Repair Units allow users to perform even the largest section
repairs with complete confidence. PN Repair Units are available in a variety of sizes (passenger
through giant earthmover tires) and larger PN units (agricultural, logger, skidder, flotation and OTR
applications) are pre-contoured to provide a better, more reliable fit in the tire.
PN Units For Tread & Shoulder Injuries/Passenger, Light Truck & Truck
Tires
STOCK NO.
SIZE
PLIES
UNITS/BOX
PN-0
PN-1
PN-2
PN-3
PN-4
PN-5
PN-6
PN-7
PN-8
1 1/4”
2 1/2”
3 1/4”
4”
5 3/4”
6 1/2”
9 1/4”
11 3/4”
13 1/2”
1
1
2
2
2
4
6
6
6
50
30
20
10
10
10
10
10
5
246
PN UNITS FOR TREAD & SHOULDER INJURIES/OTR TIRES
STOCK NO.
PN-30
PN-31
PN-32
PN-33
PN-34
PN-35
PN-36
SIZE
PLIES
UNITS/BOX
10”
14”
18”
22”
26”
30”
34”
6
6
8
8
10
12
14
3
3
2
2
1
1
1
PN UNITS FOR SIDEWALL INJURIES/OTR TIRES
STOCK NO.
PN-30S
PN-31S
PN-32S
PN-33S
PN-34S
PN-35S
PN-36S
SIZE
PLIES
UNITS/BOX
10”
14”
18”
22”
26”
30”
34”
6
6
8
8
10
12
14
3
3
2
2
1
1
1
PN UNITS FOR TREAD, SHOULDER & SIDEWALL INJURIES/INDUSTRIAL TIRES
STOCK NO.
PN-40
PN-41
PN-42
SIZE
PLIES
UNITS/BOX
7”
8 3/4”
10 1/4”
4
6
8
2
2
2
PN 50 SERIES BIAS PLY REPAIR UNITS
Designed specifically for agricultural and OTR tire repairs, Rema’s new PN 50 Series Bias Ply Repair
Units are ideal for tread area and sidewall section repairs. PN 50 Series Repair Units feature a 900
cord angle for greater compatibility with the flexing action of tires under load. And the highly flexible
PN 50 Series units are much easier to install. In addition, PN 50 Series Repair Units feature a ply-end
cover strip to eliminate cord breakout. Each size is available in two ply levels, providing outstanding
coverage and allowing the repair technical to select the right unit for the job. “S” units are designed for
sidewall injuries only.
STOCK NO.
PN-50
PN-50+
PN-52
PN-52+
PN-54
PN-54+
PN-56
PN-56+
PN-56S
PN-56S+
PN-58
PN-58+
PN-58S
PN-58S+
PN-60
PN-60+
SIZE
PLIES
UNITS/BOX
9 1/2”
9 1/2”
14”
14”
19”
19”
26”
26”
26”
26”
32”
32”
32”
32”
39 3/4”
39 3/4”
4
6
6
8
8
10
10
12
10
12
12
14
12
14
14
16
3
3
3
2
2
2
2
2
2
2
1
1
1
1
1
1
247
UNIVERSAL PATCH
The only patch you’ll ever need for most nail hole repairs on radial on radial or bias passenger, performance, light truck or truck tires. Part of Rema’s exclusive Blue Bonding SystemTM, Universal Patch
is specially reinforced for outstanding durability and reliability, and formulated to provided maximum
flexibility. The non-directional, center-over-injury Universal Patch is available in boxes or convenient
and cost effective pails.
STOCK NO.
DESCRIPTION
UP-3
UP-6
UP-8
UP-6P
UP-8P
BL-8
1/8” Universal Patch
200 UP-6 Patches in Pail
150 UP-8 Patches in a Pail
Special Cement BL 8oz. Brush Top Can
UNITS/BOX
100
50
50
200/Pail
150/Pail
24
RX RADIAL REINFORCED PATCHES
Specially designed for small nail hole repair on radial passenger, performance, light truck and truck
tires, Rema’s RX Radial Reinforced Patches are perfect for tread area and sidewall repair.
STOCK NO.
DESCRIPTION
RAD-00
RAD-0
RAD-1
1 3/16” Round RX Radial Reinforced Tread Area Repair
1 9/16” Round RX Radial Reinforced Tread Area Repair
2 3/4”x1 5/8” Non-Reinforced Radial Tread & Sidewall Repair
UNITS/BOX
10
10
10
TUBE PATCHES
REMA RED EDGE TUBE PATCHES
Rema Tip Top’s extensive line of high quality tire tube patches are renowned for their easy application
and extraordinary effectiveness. With sizes for motorcycle, passenger, light truck, medium/heavy truck,
agricultural and small off-the-road tire tube repairs, Rema Tip Top Tube Patches feature Rema’s familiar double-scalloped feathered edge to ensure perfect bonding and complete vulcanization, and a
unique rubber compound that allows the patch to stretch evenly and equally in all directions upon
inflation, assuring a reliable bond and minimal bulging in any service condition. All in convenient dispenser packs.
Refer to size chart on pages 3 & 4 for actual patch sizes.
STOCK NO. SIZE
UNITS/BOX
ATV
CAR TRUCK TRACTOR
OFF
ROAD
0
1
2
3
4
5
6
7
7A
7B
7C
7D
8
1 1/4” Round
1 1/2” Round
1 3/4” Round
2” Round
3” Round
3 3/4” Round
4” Round
3x1 1/2” Oval
4x1” Oval
6x2” Oval
7 1/4”x3 1/2” Oval
9x4 3/4” Oval
9x2 1/4” Oval
248
100
30
30
30
30
10
10
30
30
10
10
10
10
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VULCANIZING FLUIDS, CEMENTS & LIQUID PRODUCTS
TIRE REPAIR SEALANT & MOUNTING PASTE
Repair Sealant is designed for use around the edges of reair units, overbuff areas and on porous
innerliners. Rema Repair sealant creates an airtight seal, improving the integrity and reliability of
repairs.
Rema’s Tire mounting paste applies with a brish, and will not discolor or corrode aluminum or alloy
wheels, won’t freeze or harden, reduces wear and tear on mounting equipment, and dries quickly so
the tire won’t spin on the wheel.
76G
75
76
73
STOCK NO.
DESCRIPTION
76
76G
75
73
Repair Sealant, 16 oz. Brush Top Can
Repair Sealant, 1 Gallon Can
Universal Mounting Paste, 7.7 lb. Container
Brush for Mounting Paste
REMA RIM/BEAD SEALER
Rema’s non-flammable Rim/Bead Sealer stops minor seal leaks between the tire bead and rim, particularly on truck, agricultural and OTR tires.
STOCK NO.
DESCRIPTION
960
Rim/Bead Sealer, 32 oz. Brush Top Can
REMA TIRE TALC
Tire Talc makes tube and liner installation a breeze, helps eliminate tube and liner damage caused by
pinching, folding, friction and sticking, and also eliminates chaffing of tubes on repair units.
STOCK NO.
DESCRIPTION
63
Tire Talc, 1lb. Shaker Top Canister
REMA MOISTURE GUARD PNEUMATIC TOOL OIL
Developed especially for tire and retreader shop air tools, Rema Moisture Guard Pneumatic Tool Oil
keeps them running smoothly and helps eliminate damaging moisture.
STOCK NO.
DESCRIPTION
77
Moisture Guard Oil, 16 oz. Can
249
VULCANIZING FLUIDS, CEMENTS & LIQUID PRODUCTS
REMA PRE-BUFF CLEANER
Possibly the most important step in any tire repair is cleaning the innerliner around the injury. Rema
Tip Top’s Pre-Buff Cleaner dissolves mold-release lubricant and loosens other contaminants so that
they can be removed using Rema’s Rubber Scraper, creating a clean, solid surface for any repair unit.
And Rema’s Pre-Buff Cleaner is the perfect solution for crayon marks, grease and oil smears, and rubber skid marks on equipment. Available in easy-to-use aerosol cans or bulk containers.
STOCK NO.
DESCRIPTION
70
71
69
28
27
6020
Pre-Buff Cleaner, 16 oz. Spray Can
Pre-Buff Cleaner, 32 oz. Spout Top
Pre-Buff Cleaner, 1 Gallon Can
Rubber Scraper
Replacement blades for Rubber Scraper
16 oz. Aluminum Cement Dispenser With Brush Top
REMA SPECIAL CEMENT BL
The lynch pin of Rema’s exclusive Blue Bonding System,TM Special Cement BL creates a nearly indestructible bond between tire and repair unit. Specially formulated for use in all types of tire repair, special accelerator solution that can be used equally well in both cold and hot vulcanizing.
STOCK NO.
DESCRIPTION
BL-5
BL-8
BL-32
BL-G
6020
Special Cement BL, 50gm Tube
Special Cement BL, 8 oz. Brush Top Can
Special Cement BL, 32 oz. Can
Special Cement BL, 1 Gallon Can
16 oz. Aluminum Cement Dispenser With Brush Top
REMA COLD VULCANIZING FLUID
Rema Tip Top’s Cold Vulcanizing Fluid, designed for use with our line of tube patches as well as valve
patches and rubber-based valves, is available in a wide-range of sizes, from 25gm tubes up to one
gallon containers.
STOCK NO.
DESCRIPTION
203
204
205
Cold Vulcanizing Fluid, 8 oz. Brush Top Can
Cold Vulcanizing Fluid, 32 oz. Can
Cold Vulcanizing Fluid, 1 Gallon Can
TIRE REPAIR HAND TOOLS
REMA SKIVING KNIVES & STITCHERS
Proper skiving and stitching are important elements of any section repair. Rema Tip Top’s line of high
quality knives and durable ball bearing stitchers are built to last.
STOCK NO.
DESCRIPTION
6007
6008
6017
6018
6019
6004
6005
6006
Skiving Knife, Flexible Round Point Blade
Skiving Knife, Tapered Point
Skiving Knife, Narrow 6” Blade
Skiving Knife, Standard 6” Blade
Rubber Scissors, 8”
Ball Bearing Stitcher, 1x1/8”
Ball Bearing Stitcher, 2x1/4”
Ball Bearing Stitcher, 2x2”
250
UNITS/BOX
1
1
1
1
1
1
1
1
TIRE REPAIR HAND TOOLS
REMA RADIAL HAND RASPS & AWLS
Designed to roughen nail holes for reliable repairs, Rema’s line of Radial Hand Rasps are made of
high quality, tempered carbide steel and are mill cut for exacting sharpness and diameter. Rema’s Awl
is designed for probing the probing the injury to determine the extent of damage.
STOCK NO.
DESCRIPTION
190
6003
6003T
Awl
Radial Hand Rasp, 1/4” for Super Radial Anchor Seal Kit
Radial Hand Rasp, 1/4”, for Truck Tires
UNITS/BOX
1
1
1
REMA BIAS HAND RASPS
Rema Tip Top’s line of mill cut Bias Stickleback Hand Rasps are available in a wide range of sizes,
and are made of high quality, tempered steel. Handles made of durable, high impact plastic.
STOCK NO.
DESCRIPTION
199
0-R
1-R
2-R
3-R
Bias Stickleback Rasp
4 1/2” Stickleback Rasp
6 3/4” Stickleback Rasp
9” Stickleback Rasp
13” Stickleback Rasp
UNITS/BOX
1
1
1
1
1
REMA HAND BUFFERS
Sometimes a buffing wheel just won’t do. Rema’s quality Hand Buffers keep their edge repair-afterrepair. Easy to clean blades are available in replacement packs.
STOCK NO.
DESCRIPTION
31
32
Hand Buffer, Straight Steel With Replacement Blade
Replacement Pack, 10 Straight Steel Blades
CUTTERS, BUFFING TOOLS, RASPS & FINISHING STONES
WIRE BRUSHES/WHEELS
Encapsulated Wire Brushes- run at 5,000 rpm maximum- are perfect for removing rubber from around
steel cords, while the Rotary Wire Brush helps remove scorched rubber from buzzouts.
STOCK NO.
DESCRIPTION
6055
6056
6057
6053
2” Encapsulated Wire Brush (5,000 rpm max.)
3” Encapsulated Wire Brush (5,000 rpm max.)
3” Rotary Wire Brush (5,000 rpm max.)
1/4” Drive Arbor for 6057 Rotary Wire Brush
MISCELLANEOUS BUFFING & CUTTING TOOLS
STOCK NO.
DESCRIPTION
6425
33
34
788
2” Rotary OTR Tire Gouge, 1/2” Arbor
1/4” Drill Arbor For Mounting Buffing Wheels
2 1/2” Diameter Tungsten Carbide Round Nose Buffing Wheel, Fine Grit
Two 2 1/2” Diameter Tungsten Carbide Round Nose Buffing Wheels, Fine Grit,
Mounted Back-to-Back on Arbor
2” Diameter Tungsten Carbide Round Nose Buffing Wheel
6333
251
TIRE VALVES AND HARDWARE
SNAP-IN TUBELESS PASSENGER/LIGHT TRUCK TIRE VALVES
Industry standard all-rubber snap-in valves for tubeless bias or radial passenger and light truck tires.
Comes complete with plastic dome-type valve cap and valve core.
STOCK NO.
DESCRIPTION
T13R*
T14R
T18R*
T23R
T15R
T25R
437
VS911R
VS902VL
LE600R
LE602R
1 1/4” Long Snap-In Valve, .453” rim hole
2” Long Snap-In Valve, .453” rim hole
2” Long Snap-In Valve, .625” rim hole
Motorcycle Valve, .327” rim hole
Tornado/Eldorado Clamp-in Valve
Oval Base Clamp-in
1 1/4” rubber/brass snap-in, .453” rim hole
2” rubber/brass snap-in, .453” rim hole
TR NO.
413
414
418
423
415
425
430
417
416VL
600hp
602hp
•available with chrome sleeve also
CUSTOM WHEEL CLAMP-IN TUBELESS TIRE VALVES
Today’s high performance custom wheels need special valves. Quality Custom Wheel Clamp-In
Tubeless Tire Valves fit both .453” and .625” rim holes, and are recommended for all air pressure levels above 30 psi. Comes complete with dome-type valve cap and valve core.
STOCK NO.
DESCRIPTION
VS944/5
1 7/16” Long Custom Wheel Clamp-In Valve
TR NO.
416
TUBELESS TIRE VALVE EXTENSIONS
Rema’s Tubeless Tire Valve Extensions are perfect for those hard-to-reach passenger and light truck
tire valves. Both plastic and metal valve extensions are available.
STOCK NO.
686P
688P
689P
6241M
6241G
DESCRIPTION
3/4” Plastic Valve Extension
1 1/4” Plastic Valve Extension
1 1/2” Plastic Valve Extension
3/4” Metal Valve Extension
1 1/4” Metal Valve Extension
UNITS/BOX
50
50
50
10
10
CLAMP-IN BRASS TRUCK VALVES
High quality straight brass Clamp-In Valves for tubeless truck and bus tires. All with standard 5/8” side
hole mount. Complete with fork-type valve cap and valve core.
STOCK NO.
DESCRIPTION
T501R
T500R
T570R
T571R
T572R
T573R
T574R
462
1 21/32” Long Clamp-In Brass Valve
5” Long Clamp-Brass Valve
Replacement Rubber Grommets
252
TR NO.
501
500
570
571
572
573
574
RG-15
METRIC CLAMP-IN TRUCK VALVES
Designed for tubeless truck and bus tires mounted on aluminum wheels with 9.7mm (.389”) valve
holes, these high quality Clamp-In Valves come in a wide range of metric sizes.
STOCK NO.
VS902VL
VS543
VS543D
VS544D
VS545D
DESCRIPTION
TR NO.
Oval Base Clamp-In Valve
59mm Clamp-In Valve
60mm Clamp-In Valve, with 600 bend
416
543
543D
544D
545D
ALUMINUM WHEEL TRUCK VALVES
Specially designed for use on drop-center aluminum truck wheels, these high quality single-bend steel
valves have a 5/8” bottom hole, and come complete with dome-type valve cap and valve core.
Replacement rubber grommets also available.
STOCK NO.
VS946R
VS879R
523
DESCRIPTION
TR NO.
4 3/4” Long Aluminum Wheel Valve
5 1/2” Long Aluminum Wheel Valve
Replacement Rubber Grommets
509
510
RG-46
TRUCK/BUS TIRE VALVE EXTENSIONS
Solid brass Valve Extensions are ideal for those hard-to-reach tubeless truck and bus tire valves.
Extensions come complete with fork-type valve cap and hex-nut base.
STOCK NO.
402
403
404
405
DESCRIPTION
2
3
4
5
1/4”
1/8”
1/8”
1/4”
Long Truck/Bus
Long Truck/Bus
Long Truck/Bus
Long Truck/Bus
Valve
Valve
Valve
Valve
Extension
Extension
Extension
Extension
AGRICULTURAL/OTR CLAMP-IN VALVES
Brass clamp-in valve allows rapid filling of air or liquids used to add weight and improve the capabilities of agricultural and OTR tires. Both units feature fast flow valve cores, and come complete with
fork-type valve caps.
STOCK NO.
DESCRIPTION
VS714AR
VS921AR
Agricultural/OTR Clamp-In Valve, large bore, fast flow valve core
Agricultural/OTR Clamp-In Valve,2 31/32” long with 650 bend,
fits .625” rim hole, fast flow valve core
TR NO.
618-A
621-A
LARGE BORE OTR SPUDS
Top quality Large Bore OTR Spuds, tubeless and tube-type, come in the most popular configurations.
STOCK NO.
DESCRIPTION
TR NO.
UNITS/BOX
VS977
3022
Large Bore Spud, tubeless
Large Bore Spud, tube-type,
with bridge washer and hex nut
Large Bore Spud, tubeless, for rims
with 1/2” female NPT valve holes
SP2
SP4000
5
5
SP3
5
3024
253
LARGE BORE AGRICULTURAL/OTR SINGLE BEND SWIVEL VALVES
Developed especially for front wheels and outside duals, and usable with 3020, 3022 and 3024 spuds,
each unit comes complete with all necessary fittings, large bore valve core and fork-type valve cap.
STOCK NO.
DESCRIPTION
3025
3 1/8” Long Large Bore Single Bend
Swivel Valve, 800 bend, 1 5/64” vertical height
4 11/16” Long Bore Single Bend
9” Long Large Bore Single Bend
3026
3027
3028
3029
3030
3031
3032
3033
3034
TR NO.
UNITS/BOX
J650
1
J651
1
J654
1
J655
1
J660
1
J4000-7 1/2
1
J4000-9
1
J4000-29 1/2
1
J4000-2 1/2
1
J4000-4 1/2
1
VALVE CORES
High quality Valve Cores include standard Short Cores, Heat-Resistant Cores, Long Cores and Large
Bore Cores.
STOCK NO.
DESCRIPTION
100AA
100HA
3001
Short Valve Core
Short Heat-Resistant Valve Core
0.302” Large Bore Valve Core, 32-T
TR NO.
UNITS/BOX
C1
C1
C2
100
100
10
VALVE CAPS
An often overlooked way to keep tires properly inflated, we offer a wide-range of standard and large
bore valve caps.
STOCK NO.
643
655
39
658
632
8971
8971H
DESCRIPTION
Fork-Type Standard Metal Cap
Dome-Type Standard Metal Cap
Dome-Type Standard Plastic Cap
Skirted Dome-Type Metal Cap
Skirted Dome-Type Heat-Resistant Metal Cap
Fork-Type Large Bore Valve Cap
Hex Head Large Bore Valve Cap
TR NO.
UNITS/BOX
VC2
VC3
VC8
VC3
VC3
VC6
VC7
100
100
1000
100
100
10
10
VALVE PULLERS
Specially-designed Valve Pullers for passenger and light truck applications.
STOCK NO.
5407
5409
DESCRIPTION
Solid-Bar Pull-Through Valve Puller
Big Yank Slip-On Valve Puller
254
TIRE SERVICE TOOLS AND GAUGES
VALVE SERVICING TOOLS
STOCK NO.
5209
8909
449
DESCRIPTION
4-in-1 Valve Repair Tool
Cable-Type Valve Fishing Tool
Valve Spinner Wrench (screwdriver type)
VALVE CORE SERVICING TOOLS
STOCK NO.
DESCRIPTION
3042
47-068
5406
188
Standard & Large Bore Screwdriver-Style Valve Core Removal Tool
Quick Deflator Core Removal Tool
Pencil-Type Core Removal Tool
Large Grip Cap/Core Removal Tool
PRESSURE GAUGES & INFLATORS
AIR PRESSURE & TREAD DEPTH GAUGES
STOCK NO.
7213
7215
7275/7285
7230
7278
5123
DESCRIPTION
Passenger/Light Truck Pressure Gauge: 10-50 psi low pressure, durable nylon
indicator bar reads in one pound increments, high impact chrome body,
complete with pocket clip and deflator pin
Truck Pressure Gauge: 20-120 psi high pressure, durable nylon indicator bar
reads in two pound increments, high impact chrome body, complete with pocket
clip and deflator pin
Dual Head Truck Pressure Gauge: 10-120 psi high pressure, 6” extension on allchrome body, durable nylon indicator bar reads in two pound increments,
complete with metal ring
Agricultural Pressure Gauge:5-45 psi for air/liquid ballast filled tires, durable
nylon indicator bar reads in one pound increments, high impact chrome body,
gauge specially designed to allow pumping out and oiling to prevent corrosion,
complete with pocket clip
Dual Head RV Pressure Gauge: 20-120 psi high pressure, durable nylon
indicator bar reads in two pound increments, high impact chrome body, complete
with pocket clip
Tread Depth Gauge: durable all-chrome construction, wide base, reads 0” to 1”
in 1/32” increments, complete with pocket clip
IN-LINE TIRE INFLATORS
STOCK NO.
DESCRIPTION
1504
In-Line Tire Inflator: easy-to-read three-sided brass indicator bar calibrated from
0 to 120 psi in two pound increments, convenient chuck and inflator valve for easy
bleeding of over-inflated tires, complete with 36” safety hose with clip-on valve chuck
255
AIR LINE ACCESSORIES
TRU-FLATE
PRESSURE GAUGES & INFLATORS
AIR CHUCKS
STOCK NO.
DESCRIPTION
764
6044
6293
6293A
103753
Ball Chuck: barb type, 1/4” fitting
Ball Chuck: 1/4” female fitting
Ball Chuck: clip-on type, not flow through (for direct air lines)
Screw-in Air Chuck Clip
Ball Chuck: clip-on type, flow through
(for tire changers & inflator gauges)
Lock-on Dual Head Chuck
Press-on Dual Head Chuck
Grip-on Lock Type Chuck, not flow through (for direct air lines)
6999L
6999
7150
UNITS/BOX
10
10
5
5
5
5
5
5
AIR TANKS, AIR HOSE & ACCESSORIES
AIR LINE COUPLERS & NIPPLES
Cadmium-plated hardened steel air line
couplers and nipples are designed for
long service life. All couplers feature a
positive locking, sliding sleeve to prevent
accidental uncoupling. Tru-Flate, ARO,
Lincoln and Milton types available.
STOCK NO.
13-124
13-134
13-136
12-124
12-134
12-104
13-604
13-612
12-604
12-612
13-704
13-712
12-704
12-712
12-702
13-324
13-334
12-324
12-334
13-424
13-434
12-424
12-434
13-224
13-234
12-224
12-234
DESCRIPTION
1/4” Tru-Flate Male Coupler
1/4” Tru-Flate Female Coupler
1/4” Tru-Flate Female Ring Sleeve Coupler
1/4” Tru-Flate Male Nipple
1/4” Tru-Flate Female Nipple
1/4” Tru-Flate .302-32 Female
Nipple, with standard valve cap thread
1/2” Tru-Flate Male Nipple, with 3/8” NPT
1/4” ARO Male Coupler
1/4” ARO Female Coupler
1/4” ARO Male Nipple
1/4” ARO Female Nipple
1/4” Lincoln Male Coupler
1/4” Lincoln Female Coupler
1/4” Lincoln Male Nipple
1/4” Lincoln Female Nipple
1/4” Milton Male Coupler
1/4” Milton Female Coupler
1/4” Milton Male Nipple
1/4” Milton Female Nipple
256
THREAD
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
3/8”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
AIR LINE ACCESSORIES
REINFORCED AIR HOSE
Two-ply heavy duty, non-kink Reinforced Air Hose can take the worst punishment: oil, grease, abrasion and extreme temperatures. Built to handle pressures up to 250 psi. Length come complete with
male pipe thread on both ends.
STOCK NO.
DESCRIPTION
38-25HD
38-50HD
12-25B
12-50B
25’ Reinforced Air
HOSE ID
Hose
Hose
Hose
Hose
with
with
with
with
3/8”
3/8”
1/2”
1/2”
Male
Male
Male
Male
Ends
Ends
Ends
Ends
3/8”
3/8”
1/2”
1/2”
PERMA COIL® RETRACTING AIR HOSE
Bright yellow coiled retracting air hose is extremely durable and resists damage from oil, chemicals
and abrasion. Easy-to-see bright color helps eliminate accidents. All units include a brass 3600 swivel
male connector.
STOCK NO.
DESCRIPTION
TF23-403
TF23-404
TF23-413
TF23-414
25’ Perma
50’ Perma
25’ Perma
50’ Perma
Coil Air
Coil Air
Coil Air
Coil Air
Hose,
Hose,
Hose,
Hose,
1/4”
1/4”
3/8”
3/8”
Note: Air line regulators, filters, and water separators also available.
PNEUMATIC BEAD EXPANDERS
257
WHEEL ATTACHING PARTS AND TOOLS
TORQUE LIMITING SOCKETS
RECOMMENDED BY TIRE SERVICE PROFESSIONALS!
We Stock #30174 Four Piece Starter Kit
Six-Piece and Nine-Piece Starter Sets are available by Special Order.
Individual Sockets are also available by Special Order.
WHEEL NUT AND STUD REMOVING KIT
For removing 13/16” Budd wheel inner cap nuts, 3/4” and 5/8” lug studs. Kit includes Drive-On Tool,
13/16” sq. 1 1/8” dia., 3/4”, and 5/8” Rib Nuts, and Drift Pin.
PART #
DESCRIPTION
5205
Triple Duty Kit
REPLACEMENT RIB NUTS
Order as required.
PART #
DESCRIPTION
5206
5207
5208
1 1/8” dia. (13/16” square head) Rib Nut
3/4” Rib Nut
5/8” Rib Nut
WHEEL GUARD
• Protect Steel and Aluminum Wheels
• Prevent Corrosion
Wheel Guard is a black nylon separator plate approximately 1/32” thick that is placed between the hub
and the wheel or between dual wheels. We recommend the wheel guard be used to prevent corrosion
and wear between surfaces. Use with both steel and aluminum wheels.
MFR. NO.
APPLICATION
DIAMETER STUD
5901
5902
7902
10 HOLE 11 1/4” bolt circle
10 HOLE 285.75 mm bolt circle
8 HOLE 275 mm bolt circle
1 1/8” and 7/8”
3/4”
20 mm
5/8” AND 3/4” STUD SETTERS
Simply thread STUD SETTER on. Use impact or 4-way wrench to install stud.
ORDER NO.
DESCRIPTION
5833
5834
5/8” Wheel Stud Setter - uses 1 1/8” hex socket
3/4” Wheel Stud Setter - uses 1 1/4” hex socket
258
TOOLS & EQUIPMENT
TRUCK TIRE HAMMERS
HAMMER WITH FIBERGLASS HANDLE.
TG-11
TG-11EH
MFR. NO.
OVERALL LENGTH
35429
35229
32”
32” Rpl. Handle
HAMMER WITH WOOD HANDLE
T-11E
T-11EH
MFR. NO.
OVERALL LENGTH
35329
35129
30”
30” Rpl. Handle
*Other sizes & replacement handles available
DOUBLE END TRUCK WRENCHES
STANDARD
TR1
TR98
TR2
TR9
MFR. NO.
SOCKET SIZES
32501
32508
32502
32509
1 1/8”, 13/16”, sq.
1 1/2”, 13/16” sq.
1”, 1 1/4”, 5/8” sq.
1 1/4”, 1 1/16”
TRUCK WRENCH HANDLE
Handle is extra long for increased leverage and heat treated for extra strength
TR-5
MFR. NO.
LENGTH
HEX
32318
22”
3/4”
4-WAY WRENCHES
PASSENGER CAR
MFR. NO.
LENGTH
Socket sizes: 3/4”, 13/16”, 7/8”, 15/16”
T-57
35657
23”
LIGHT TRUCK
MFR. NO.
LENGTH
Socket sizes: 7/8”, 15/16”, 1”, 1 1/16”
T-90
35690
25”
HEAVY DUTY TRUCK FOUR-WAY
MFR. NO.
LENGTH
Socket sizes: 1 1/16”, 1 1/4”, 1 1/2”, 13/16” sq.
T-95
35695
27 1/2”
*Other sizes available
TUBELESS TIRE TOOLS
Designed for mounting and demounting tubeless tires. Hand forged chrome nickel steel. Use in pairs.
T-45A
MFR. NO.
LENGTH
34645
37”
HEAVY DUTY TUBELESS TRUCK IRON
Stock is 7/8” for extra strength, length is 41” for extra leverage. Use in pairs.
T-45 HD
MFR. NO.
LENGTH
34647
41”
259
TOOLS & EQUIPMENT
MOUNT/DEMOUNT TIRE SPOONS
STRAIGHT SPOON TIRE IRONS
T-19
T-19A
T-38
MFR. NO.
LENGTH
DIA.
32119
33219
33238
24”
30”
30”
11/16”
11/16”
7/8”
CURVED SPOON TIRE IRONS
T-2X
T-20A
T-39
MFR. NO.
LENGTH
DIA.
32102
33220
33239
18”
30”
30”
11/16”
11/16”
7/8”
TRUCK LOCK RING REMOVERS
Designed especially for Firestone RH and TI rims.
T-23
MFR. NO.
LENGTH
DIA.
32123
24”
11/16”
Designed especially for Firestone RH and RI rims
T-23A
33223
30”
11/16”
Combination ring tool T-23B with flat tapered end. Ideal for all around ring and rim work.
T-23B
MFR. NO.
LENGTH
DIA.
33224
23 1/2”
11/16”
Combination ring remover. Curved end is shaped to remove full circle lock rings. Avoids distorting rings.
T-22
MFR. NO.
LENGTH
DIA.
32122
18”
5/8”
MFR. NO.
LENGTH
DIA.
32125
18”
5/8”
For servicing 5o wide base rims.
T-25
For removal of continuous side rings on two piece truck rims
T-27A
MFR. NO
LENGTH
DIA.
32128
18”
5/8”
Aids in removing and replacing lock rings on all Budd, Ford, Chevrolet, and GMC wheels.
T-48A
MFR. NO.
LENGTH
DIA.
34648
37”
3/4”
BUDD NUT WRENCHES
Holds outer cap nut while turning inner nut on Budd and Ford wheels.
TX-9
TX-10
TX-12
MFR. NO.
SIZE
30609
30610
30612
1 1/2” and 38mm
35mm
41mm
260
GARAGE EQUIPMENT
STUDS AND STUDDING EQUIPMENT
TIRE STUDS
Steel Jacket
Precision made tire studs with carbide traction pins encased in a wear resistant jack. The hole design
of the jacket together with the tapered carbide pin help maintain a consistent pin protrusion for the life
of the tire. Sold in boxes of 1,000.
ORDER NO
12
13
15
16
17
DESCRIPTION
HOLE DEPTH INCHES
#12 Tire
#13 Tire
#15 Tire
#16 Tire
#17 Tire
12/32
13/32
15/32
16/32
17/32
Studs
Studs
Studs
Studs
Studs
MODEL K-5 STAND
Ideal for Busy Shops
Includes: shelf for stud package, gun holder and support for tire stud feeder. Welded steel construction
and stable T-shape support. Base dimensions: 21”x 27”, 5’2” Height.
ORDER NO.
K5
DESCRIPTION
K-5 Stud Stand
Gun and Stud Feeder Not Included
STUD FEEDER
Fully Automatic Feeding
Electric Motor
A fully automatic, fast loading feeder that provides positive stud orientation. Fewer moving parts for
continuous service, minimum maintenance. Feeds up to 225 studs per minute. Handles (TSMI) sizes
#12, #13, #15, #16 and #17. 110 V, 60 cycle.
ORDER NO
KFP2
MFR. NO
DESCRIPTION
KFP2-1
Stud Feeder
MODEL 10 STUD GUN
For Automatic Feeding
Equipped for automatic feeding of studs to gun. Positive center feed eliminates wrong positioning of
studs. Handles stud sizes (TSMI) 10 thru 17. Studs installed straight. Easy maintenance- no tools
needed. No “push rod” yet fingers are automatically ejected from hole.
ORDER NO.
10
DESCRIPTION
Model 10 Stud Gun
REPAIR KIT FOR #10 STUD GUN AND REBUILD KIT FOR #10 STUD GUN
MFR. NO.
0382
DESCRIPTION
Repair Kit for #10 Stud Gun
REBUILD KIT
MFR. NO.
0385
DESCRIPTION
Rebuild Kit for #10 Stud Gun
FEEDER BOY
Holds Up to 100 Studs
Inexpensive and fast method for feeding studs automatically to Model 10 gun. Lift off cap and load
with up to 100 studs. Snap onto base and rotate by hand to release studs into gun chamber.
Lightweight rugged plastic construction. Gun not included.
ORDER NO.
4048
DESCRIPTION
Stud Feeder boy
261
GARAGE EQUIPMENT
TIRE AND WHEEL EQUIPMENT
CHROME NUT COVER REMOVER
Removes and installs chrome wheel nut covers without scratching or damage. Adjustable. Formed
steel jaws with Non-Mar protective coating.
ORDER NO.
DESCRIPTION
N88-1101
Chrome Nut Remover
BOLT HOLE CHAMFER WEAR GAUGE
Visually detects excessive wear in .875R spherical chamfers of bolt holes in disc wheels. Designed for
use with stud piloted dual steel wheels with .875R spherical chamfered bolt holes 3/8” to 1/2” disc
thickness.
ORDER NO.
DESCRIPTION
FS5905
Bolt hole Chamfer Wear Gauge
MARKAL® PAINTSTIK®
Permanent Paint
Permanent, waterproof and fadeproof. Marks on wet tires or tires covered with mold lubricant.
Withstands vulcanizing and retreading temperatures. Also marks on wood, plastic, glass, etc.
Nontoxic, contains no lead. Sold 12 per box.
MFR. NO.
COLOR
MHKPS
White
EQUAL TIRE BALANCING FORMULA
Continuous Balance... Every Tire, Every Wheel Position, Every Time!
No More Vibration & Uneven Treadwear
Equal is a revolutionary dry balancing formula that provides a continous balance to the tire and wheel
assembly. Fast and easy to install on or off the vehicle. Ideal for all types of truck tire and wheel
assemblies, aluminum or steel, disc or spoke, tube and tubeless. Especially effective for difficult to balance aluminum rims.
ORDER NO.
FOR TIRE SIZE
A12
B10
C8
D6
E4
F2
1200 R22.5
10.00 R20-275/80 R24.5
900 R20- 245/75 R22.5
800 R19.5-245/70 R19.
800 R17.5-225/75 R17.5
215/85 R16-9.50-R16.5
USE PACKAGE SIZE
A
B
C
D
E
F
For best results, use a valve stem filter extension when using Equal. Install Equall through the valve stem.
Recommended Accessories
DESCRIPTION
Portable Applicator
Valve Stem Filter- Nickel Plated
Valve Stem Filter- Brass
AUTO & LIGHT TRUCK BOLT PATTERN GAUGE
Easily identify rim sizes. Gauge fits over disc or drum studs to accurately measure bolt patterns. Mag
wheels are measureed by fitting the gauge into 2 lug holes. To measure wheels with conical holes use
the 2 conical adapters. Kit includes 4 and 5 lug hole gauges.
PART #
DESCRIPTION
2002
Wheel Gauge
262
GARAGE EQUIPMENT
TIRE MOUNTING EQUIPMENT AND LUBRICANTS
THE BEAD SEATER
• Set Tubeless Beads Instantly- Every Time!
• Eliminate Personal Injuries
Use No Ether
•
•
•
•
•
•
Use No Tire Grease
Use No Tire Compressor Bands
A SAFE AND EASY TIRE INFLATING DEVICE.
COULD PAY FOR ITSELF IN 24 HOURS!
Completely Portable- weighs only 25 lbs.
Carry in one hand- Road & Shop use
If your man can turn a key, then he can now seat a Bead Instantly
Set all tires from the smallest car up to 17.5x25
Golf Cart Tires
Race Car Tires
MURPHY’S TIRE & TUBE COMPOUND
For Mounting Tube & Tubeless Tires
Rust Inhibitor
Economical and long lasting 8 lb. pail makes 5 gallons when mixed with water. Also
available premixed as liquid. Can also be used for lubricating rubber mounted spring
shackles, bushings, fan belts, and other rubber fittings.
PART NO.
SIZE PAIL
2000
2005
2010
Liquid MURPHY’S
2020
2023
2055
000491
8 Lbs.
25 Lbs.
40 Lbs.
PER CASE
4
1
1
1 Gal.
5 Gal.
55 Gal.
Lube Swab
4
2
1
1
FREYLUBE
Bead Lubricant
Rust Inhibitor
Prevents corrosion caused by electrolysis as well as conventional rust. Reduces
replacement expenses for flaps on conventional tires.
PART NO.
SIZE PAIL
PER CASE
FRY5
FRY25
4 1/2 lb. Can
25 lb. Can
4
1
263
GREASE AND GREASE EQUIPMENT
HEAVY DUTY DISC BRAKE WHEEL BEARING GREASE
The highest quality multi-purpose grease due to a lithium complex base providing for greater heat and
water resistance. Operating temperature range of -10o to 350oF. Fortified with additives to resist rust,
oxidation, extreme pressure and wear. Excellent water resistance. Designed for boat trailers, disc
brake wheel bearings and more. NLGI Grade 2.
PART NO.
DESCRIPTION
30-141
3160
3161
3 oz. cartridge, 3 per display bag
14 oz. cartridge
1 lb. (16 oz.) can
MARINE AND TRAILER WHEEL BEARING GREASE
A high quality lithium based, multi purpose grease that performs well under a temperature range of 0o
to 290oF. Highly water insoluble and washout resistant. Fully fortified with additives to protect against
rust, oxidation, extreme pressure, and wear. A recommended leader for medium slow to medium high
speed bearings and greased chassis points. NLGI Grade 1 1/2. USDA H2.
PART NO.
DESCRIPTION
3121
3184
3120
1 lb. (16 oz.) can
3 oz. cartridge, 3 per display bag
14 oz. cartridge
MULTI-PURPOSE GREASE
A lithium base grease that performs well under a temperature range of 0o to 265oF. Water insoluble.
Use in most automotive, agricultural and industrial applications including chassis and other grease
lubricated bearings. A grease for normal temp/speed conditions and job requiring frequent regreasing
because of contaminating environment. NLGI Grade 2.
PART NO.
DESCRIPTION
30-124
14 oz. cartridge
GREASE GUNS
1142 Lisle Brand Professional Lever Action Grease Gun
Our heavy-duty grease gun for automotive professionals. Variable/short stroke for easy use in confined areas.
1134 Lisle Brand Professional Pistol Grip Action Grease Gun
Our heavy-duty grease gun for automotive professionals. Pistol grip action for one-hand operation.
264
PROFESSIONAL LIGHTING AND CORD PRODUCTS
ROUGH DUTY FLUORESCENT/SPOT WORK LIGHT -
PROFESSIONAL SERIES
• The Industry Standard
• SL-907 (6Ft cord).
• SL-935 (25Ft cord).
• SL-936 (50Ft cord).
LAMP
HANDLE
CORD BULB
High Impact
Yellow Flame Retardant 16/3
Lamp Protector Polypropylene
SJEO
with High Gloss
Reflector
Uses 13 Watt
10,000 Hr. Rated
6500 Kelvin
(included)
PLUG/
OUTLET
CS
QTY
CS
WT
Polarized Plug SL-907 6 9lbs.
with 12 AMP
SL-935 6 14 lbs.
Grounded
SL-936 4 19 lbs.
Receptacle
Pro Mechanics choice. Impact resistant fluorescent work light with chemical and UV resistant lamp
protector. Custom high gloss reflector and clear polycarbonate top for spot-lighting. Convenient double hang hook allows hanging or standing. Unique nylon tips for scratch resistance and extra grip.
Polypropylene handle and convenient rocker on/off switch. 6ft, 25ft or 50ft 16/3 SJT cord. 12 AMP
grounded receptacle. Cool running 13 wall 10,000 hour rated 6500k fluorescent bulb (included).
UTILITY LIGHT ON 50FT RETRACTABLE REEL -
PROFESSIONAL SERIES
• SL-851 (50Ft cord).
LAMP
HANDLE
CORD
BULB
CS QTY
CS WT
Galvanized
Metal Lamp
Shield with
Hang Hook
Heavy Duty Metal
Retractable Reel with
Black Flame Retardant
Polypropylene Handle
18/3
SVT
Up to 75 Watt
Incandescent
(not included)
4
17 lbs.
Heavy duty metal retractable reel and utility light with reflective galvanized metal lamp shield, hang
hook, black polypropylene handle, and durable push on/off switch. 50ft 18/3 SVT cord. Uses up to
75 watt incandescent bulb (not included).
ROUGH DUTY FLUORESCENT WORK LIGHT ON 40FT METAL REEL - PROFESSIONAL SERIES
• SL-825 (40Ft cord).
LAMP
REEL
CORD
High Impact Lamp
Protector with
High Gloss
Reflector
Heavy Duty
16/3
Metal Retractable SJT
BULB
PLUG/
OUTLET
CS
CS
QTY WT
13 Watt
10,000 Hour
Rated 6500 Kelvin
(included)
Polarized Plug
with 10 AMP
Grounded
Receptacle
4
44 lbs.
Heavy duty metal retractable reel and fluorescent work light with clear chemical resistant lamp protector, high gloss reflector, yellow polypropylene handle, and durable push on/off switch. Nylon
tipped double hang hook or convenient magnetic clamp. 40ft 16/3 SJT cord with polarized plug and
10 AMP grounded receptacle. Cool running 13 wall 10,000 hour rated 6500k fluorescent bulb
(included).
265
LIGHTING AND CORDS • WIPER BLADES
500 WATT HALOGEN PROJECT WORK LIGHT
• SL-1002 UPC# 0 17398 21002 (3Ft cord).
LAMP
HANDLE
CORD
BULB
PLUG
CS
CS
QTY WT
Tempered Glass Lens
with Metal Safety
Grill
Foam Grip
“S” Type
18/3
SJTW
500 Watt
Halogen
with a spare
Polarized Plug
6
31 lbs.
Portable 500 watt halogen work light with foam grip “S” type handle. Tempered glass lens with metal
safety grill and power coat finish. 3ft 18/3 SJTW all weather cord with molded plug. 500 watt halogen bulb with a spare bulb in a protective bulb holder (included).
CONTRACTOR GRADE - SINGLE TAP
MODEL
CORD LENGTH
CORD
RATING
CS QTY
UPC
SL-725
25ft
16/3 SJTWA
13A
18
0 17398 10128 8
SL-750
50ft
16/3 SJTWA
13A
12
0 17398 10129 5
SL-751
100ft
16/3 SJTWA
10A
6
0 17398 10164 6
SL-752
25ft
14/3 SJTWA
15A
12
0 17398 10191 2
SL-753
50ft
14/3 SJTWA
15A
6
0 17398 10192 9
SL-754
100ft
14/3 SJTWA
13A
6
0 17398 10193 6
SL-757
25ft
12/3 SJTWA
15A
4
0 17398 10194 3
SL-758
50ft
12/3 SJTWA
15A
2
0 17398 10195 0
SL-759
100ft
12/3 SJTWA
15A
2
0 17398 10196 7
SAVER WIPER BLADES
VISION SAVER
CALL FOR APPLICATIONS
266
LUBRICANTS, CLEANERS, AND INHIBITORS
LPS® 1 GREASELESS LUBRICANT
• Resists Oil & Dust Buildup
• Fast-acting Penetrant
• Contains No CFCs
PART NO.
00116
01128
• Cleans & Displaces Moisture
• Ideal for Electrical/Electronic Components and for
Delicate Mechanisms
DESCRIPTION
11 oz.
1 gal.
LPS® 2 INDUSTRIAL-STRENGTH LUBRICANT
• Non-drying Oily Film
• Loosens Rusted & Frozen Parts
• Nonflammable Propellant
PART NO.
00216
02128
• Long Lasting Lubrication
• Multi-purpose Lubricant, Penetrant, Protectant
• Contains no CFCs
DESCRIPTION
11 oz.
1 gal.
LPS® 3 HEAVY-DUTY RUST INHIBITOR
• Transparent, Soft Waxy Film
• Protects Up to 2 Years
• Contains No CFCs
PART NO.
00316
03128
• Stops Rust & Corrosion
• Non-slinging Heavy Duty Lubricant
DESCRIPTION
11 oz.
1 gal.
LPS® PRESOLVE® CLEANER/DEGREASER
•
•
•
•
1,1,1 Replacement Alternative
Cleans & Degreases on Contact
No Rinsing, No Residue
Contains No CFCs
PART NO.
01420
• Natural-based Solvent
• Controlled Evaporation for Deep Cleaning
Penetration
DESCRIPTION
15 oz.
LPS® HEAVY-DUTY SILICONE LUBRICANT
• 5% Silicone
• Water Based
• Contains no CFCs or Chlorinated Solvents
PART NO.
40003
• Lubricates and Protects
• Safe on Most Surfaces
DESCRIPTION
13 oz.
LPS® COLD GALVANIZE
• 95% Pure Zinc
• Works on Rusted Surfaces and All Metals
PART NO.
00516
• Works as a Primer
• Contains No CFCs or 1,1,1 Trichloroethane
DESCRIPTION
16 oz.
LPS® ELECTRO CONTACT CLEANER
• Cleans, Degreases Delicate Mechanisms
• No Rinsing, No Residue
• Safe on Most Surfaces
PART NO.
DESCRIPTION
LPS 00416
16 oz.
267
• Quick Penetration and Evaporation
• Nonconductive, Nonflammable
CLEANERS AND CAR CARE PRODUCTS
CAR CLEANING PRODUCTS
MORE SHINE LESS TIME™
More Shine Less Time is not a messy fam or drippy liquid. This long lasting spray-on coating
makes dull, faded tires look brand new in seconds. Just spray and walk away. Other brands don’t
last because they’re made with water and surfactants (soaps) that evaporate and wash off easily
with water. More Shine Less Time contains NO surfactants or water so it lasts longer. Selected
“Best Tire Product” by Corvette Fever magazine.
• 12 oz. Aerosol, 12 cans per case.
• Item No. 91044
“More Shine Less Time for tires makes tires shine without that greasy look. And the goop that
spins nto the wheels and inner fenders is thankfully missing.
R.B., San Jose, CA
TRIM SHINE®
The protectant professions use. Trim Shine brightens and protects bumpers, running boards, trim,
dashboards, vents, hoses, door gaskets, and more. Just spray and walk away. Won’t run, drip, or
streak. No rags, dirty hands, or waste.
• 12 ox. Aerosol, 12 cans per case.
• Item No. 91034
“I was given a can of Stoner Trip Shine by my Ford Dealer. Your product is incredible. Trim Shine
blows away Armor All and that 2000 stuff.”
D.N., Centerville, VA
SPEED BEAD®
Speed Bead lets you wax in minutes, not hours. Cleans, polishes, and waxes in one easy step.
Removes oxidized paint, light scratches, and environmental damage. Contains a proprietary
blend of cleaners, waxes, and synthetic micropolymers. Safe for clear coat finishes.
• 15 oz aerosol, 12 cans per case
• Item No. 91354
“Speed Bead is the best wax n the world. Wow, is that stuff great! Other race team come over to
our paddock area to bowwow Stoner products.”
Scott Bove, Owner/Driver Team Tech Racing,
Porsche GT3 Cup World Challenge
BEAD MAX®
Bead max chemically bonds to your finish giving your maximum surface protection, water beading,
and shine. It contains no cleaners or abrasives.
• 15 oz. Aerosol, 12 cans per case.
• Item No. 91384.
“I have used ZymÔl, and most mass market waxes. I have even used products most people don’t
know about. Bead max is the best by far.
J.T., Stockton, CA
“Bead max is very fast to use and much more efficient than any other wax. It made he pain look
like it came directly off of the showroom floor.”
A.G., Strasburg, PA
268
CLEANERS AND CAR CARE PRODUCTS
CAR CLEANING PRODUCTS
INVISIBLE GLASS®
Cleans windows and mirrors so well, you’ll think they’re invisible. Other cleaners use water and
foamy soaps and surfactants. These low cost ingredients remove basic dirt, but leave streaky
residues. Invisible Glass contains NO soaps, surfactants, or foams so you get maximum clarity.
Safe for tinted windows.
• 19 oz. aerosol, 12 cans per case.
• Item No. 91164
“It really works? Many brands claimed to be streak free but none were until I tried Invisible Glass.”
M.G. Warren, PA
“I applied Invisible Glass to my award winning Corvette aand the glass almost disappeared. My
Corvette went on to win the grand championship, beating out all year Corvettes.”
D.H., Woburn, MA
TARMINATOR®
Finally, a tar and sap remover that works! Used by a leading German luxury sedan manufacturer
to clean and prep cars after transit from Europe. Cleans painted surfaces in preparation for waxing. Clearcoat safe.
• 14 oz aerosol, 12 cans per case.
• Item No. 91154
“I’ve just thrown away near full cans of your competitors’ sap and tar removers. The difference
between Tarminator and the others is simple, their don’t work. “
M.B. Los Angeles, CA
UPHOLSTERY AND CARPET CLEANER
Removes water-soluble dirt and stains such as coffee, food, candy, smudged dirt, and grime.
Dries fast and won’t leave surfaces saturated and wet
• 18 oz aerosol, 12 cans per case
• Item No. 91144
“Stoner Carpet Cleaner is excellent! I tried it first on a chocolate stain on my minivan upholstery
and it came out right away.”
P.B. Nashua, NH
XENIT® CLEANER/REMOVER
The fastest way to remove greasy dirt and “sticky stuff.” You won’t find a better way to remove
adhesives, decals, gum, lipstick, and tar from carpeting, glass, chrome, metals, and moare.
• 10 oz. aerosol, 12 cans per case.
• Item No. 94213
“XENIT is the only product that will remove a rubber doughnut from the side of our race cars after
running speedways like Daytona or Talladega.”
Tony Barnes, Shop Foreman,
ML Motorosports
Jason Jarett crew, ARCA Series
Call for information on additional Stoner Products.
269
PROFESSIONAL LANDSCAPE
L TRAILER ACCESSORIES
WE STOCK TARPS TOO! - SEE PAGE 271
LT25
Water Cooler Rack
LT10 Lockable Trimmer Rack
LT32 Locking Gas Can Rack
LT15 Multi-Rack
LT12 Trimmer Rack
LT22 Backpack Blower Rack
LT13 Lockable Trimmer Rack
LT30 Gas Can Rack
LT37 Hand Tool Rack
LT20
Backpack Blower Rack
LT35
Hand Tool Rack
270
TRUCK SAFETY • TRUCK TARPS
EMERGENCY TRIANGLE SAFETY WARNING KITS
449
Warning Triangle Kit
1015 James King Kit
Warning Triangle Kit W/Flares and Fire Extinguisher
TRUCK TARPS
Part Number
Description
3500
3598
3599
3600
397
6’ x 12’ Black Mesh Tarp
7’-6” x 16’ Asphalt Lumite Tarp
TARP SYSTEMS
271
1215200
1430200
1440200
12VDC w/Roller Fairlead
1450200
272
MOTORCYCLE CHOCKS AND ACCESSORIES
MOTORCYCLE PRODUCTS
TUBULAR CHOCK
Part# T101-2003
• 1” 304 Stainless Steel Construction
• One Man Installation / Top Side
• Quick Release
• Wood Floor Installation Hardware Included
Experience The Difference...
- No Rust Stainless Steel
- Thick Wall Heavy Duty
- Larger Diameter than Competitors
- Shipped On Time / Every Time
- Call For Details
Proven Unique Fastener System
Part# Z101-0010 (Additional Hardware (4))
RECESSED CHOCK
Available in 24” and 16” Lengths Black Powder Coated
Part #
Description
T436-1634B
T436-2400B
16” Recessed
24” Recessed
• Flush Mount
• Heavy Duty Steel Pan & Lid
• Tie Down Strap Storage
• Installation Hardware Included
HELMET AND ACCESSORY RACK
• 1 1/4” 304 Stainless Steel Construction
• Easy Flange Mount
• Arrives Fully Assembled for Easy Installation
• Style Similar to Pit Stop Wheel Chock
• Designed to Strap and Restrain Helmets and Accessories
• Restraint Bars Hug Riding Apparel Nicely
Part #
T101-2400
T101-3200
T101-4800
Length
24”
32”
48”
273
LIFTGATE PARTS
LIFTGATE REPLACEMENT PARTS
We Stock These & Much More!
DRAIN PARTS
SOLENOIDS
APL 3365
Heavy duty drain solenoid kit comes
complete with solenoid, bracket, cap and
stem hardware.
APL 3000
3-post, positive to excite, metal grounded solenoid with flat base. Use for most
all liftgate makes and models.
AMF 3330
Complete solenoid drain valve with cartridge replaces Maxon 250072 and
Leyman. Used on most SPX (Fenner)
electric power units.
APL 3020
Another great replacement option, this
bakelite upright solenoid is built to
Prestolite standards. 3-post, positive,
grounded with curved base.
SWITCHES
APL 2250
This common dimmer style start switch offers
quality, reliability and value all in one.
BPL 2250
Order this canister switch for service and
replacement of many Monarch and Theiman
items. Features screw-type mount.
NEED PARTS FOR THAT OLD LIFTGATE? NOW WE HAVE EM!
MOTORS
BMT 0022
A very popular regular duty tang shaft
liftgate motor! This CCW, 12-Volt, DC,
OEM motor is found on Waltco, MAxon
Monarch and MTE.
AMT 0077
Regular dutyCW replacement motor
with spline shaft. An exact replacement
for the Prestolite MDY7039. Also use for
Maxon, Waltco and Venco replacements.
AMT 0097
Built to Prestolite specifications and
affodably priced. Regular duty motor
replaces Waltco, Maxon, Anthony,
Venco, DelAmerica, Tommy and SPX
(Fenner) products.
POWER UNITS
APP 0100
Replace that worn out pump with this OEM manual power pack. Features OE punp and motor, 3-qt. reservoir and regular duty motor.
APP 0250
Drop-in replacement for MAxon 250100 power unit. Pressure set to 2500 psi, adjustable. Prestolite solenoid with 2 wires for drain solenoid and a 12” L reservoir with breather. Includes extra port for return line.
274
LIFTGATE PARTS
LIFTGATE PEPLACEMENT PARTS - WIRE AND BATTERY PRODUCTS
MASTER DISCONNECT SWITCH
APL 9653
6-36 Volt. 180 Amps continuous capacity - 1,000 amps rush. S.P.S.T. (off-on). Two stud terminals 3/8”
copper. 4-1/8 long by 2-5/8” diameter. Conforms to UL 558. WIth face plate.
CIRCUIT BREAKERS
APL 9005 50 Amp Circuit Breaker
Same mounting holes as APL 8012. SLightly smaller overall. Same trip characteristics.
TRAILER DISCONNECT PLUG
BPL 2600 Trailer disconnect plug.
BPL 2601 Socket only.
BPL 2602 Male Plug only
Single pole connector. Up to 1/0 cables. Hot, 2 gauge ground. Brass contracts. Mount through 2”
diameter hole. Internal ground return terminal. 300 amps continuous.
TOW CONDUCTOR TRAILER DISCONNECT PLUG
Dual pole, rated 200 amps for 6 gauge wire.
BPL 2610 Plug and Socket.
BPL 2611 Socket only.
BPL 2612 Male plug only.
BATTERY CABLES
Do that installation right! If you want to add products to what you’ve already bought, check our pricing
before you buy the competition.
ELW 5000
1/0 gauge, SGT, black jacket, copper wire, 133 strand.
ELW 5004
4 gauge, SGT, red jacket, copper wire, 63 strand.
ELW 3042
Dual pole change line Bonded 4 gauge copper rated. 200 amps
ELECTRICAL COMPONENTS
ACCESSORIES
DELUXE TERMINAL ASSORTMENT
Make sure you have the correct teminal for the job 240 pieces.
EPR 5099
Keeps those connecotrs watertight and seals connections for longevity. Heat shrinkable polyolefin shrinks
to 1/2 of original size
SHRINK TUBING
Waterproof polyolefin spool. Shrink ratio 2 to 1.
EPR 4008 4’ x 1/8”
EPR 4016 4’ x 3/16”
EPR 4025 4’ x 1/4”
EPR 4038 4’ x 3/8”
EPR 4050 4’ x 1/2”
EPR 4100 4’ x 1”
Heavy wall with adhesive. Superior strain relief. SHrink ratio 3 to 1. Preshrunk ID
EPR 4238 3/8”
EPR 4275 3/4”
EPR 4210 1”
275
AUTOMOTIVE SERVICE PRODUCTS
# SNOBRUM
Telescoping Aluminum Handle
# SNOWBRUM -1
Gen II Wooden Handle
PORTABLE BATTERY JUMP PACKS
ALLSTART
ALLSTART-SPORT
12Volt Portable Jump Starter
Ultra-Reflectiver labeling
29 foot, 6 gauge cables
Adjustable Emergency Light
Display Packaged for Resale
115 Volts AC - 300 Watts Power
Deep Cycle 24 Hr Battery
AMPG-108 “MARINA”
Marina 12Volt Portable Jump Starter
Heavy Duty High Output Battery
4 foot, 4 gauge cables
12 Volt DC Power Source
115 Volts AC Power Source
DC Charging Cord Included
APSOP-106 “PRO-ONE”
Built Tough for Professional Use
4 Foot 4 Gauge Cables
AMJ-401 “MINI-JUMPER”
ALLSTART-CORD
12Volt Charging Cord
ALSO AVAILABLE
ARJ-104
WPG-103
Standard 12 Volt Portable Jump Starter
“Winchester” 12 Volt Portable Jump Starter with power inverter
276
Mini 12Volt Portable Jump Starter
Hi-Brite 10 Watt Halogen Spotlight
User Safe Battery Clamps
High Output 12 amp hr. Battery
Adapter Storage
Great for Cell Phones, 12V Car Vac.
12V Spotlights, Air Compressors,
12V Fans, 12V TV’s, Portable Radios.
and Much More!
R134A FREON CHARGING TOOL
FAST, EASY, ACCURATE RECHARGING.
Easy to read color-coded gauge for an accurate
system fill
Easy reach with 8-inch of charging hose to
reach all low-side ports
Easy one-hand operation. Squeeze trigger to fill,
release to measure
Sturdy metal coupler attaches & detaches with ease.
# QC-1CS
R134A FREON REFRIGERANT
R134A REFRIGERANT
30 lb. Containers
Bulk Discounts Available
Call Us Today for a Quote
INTAKE CLEANING KITS
3M Intake System Cleaner Kit
This is the most complete package of intake system cleaning chemicals available.
This 3-pack is designed with the professional user in mind, providing the cleaning
agents to go through the upper intake and in the tank, while including an aerosol
product to clean the throttle plate and air intake on fuel-injected gasoline engines.
# 08962
3M Intake System Aerosol Adaptor Kit
Equipped with an assembled tube attached to a brass quick disconnect fitting
(08927) for attachment to the 3M Intake System Cleaner 08958. The kit also
includes a can hanger (08837) and a complete set of instructions
# 08960
277
3M THROTTLE PLATE AND CARB CLEANER #08866
8.5 OZ NET WT
Unique, low VOC aerosol product designed to dissolve the deposits that are normally found on the
throttle plate in fuel injected cars. It both cleans and lubricates, while restoring performance
3M SILICONE PASTE #08946
8 OZ NET WT
A non-melting, water resistant, 100% solids, silicone compound designed to protect surfaces from
oxidation. Also used as a general purpose lubricant for brakes (metal to rubber applications);
great for O rings and weatherstripping.
3M WINDOW-WELD ROUND RIBBON SEALER #08610
1/4 IN X 15 FT KIT
Contains one roll of sealer and setting blocks. Its unique feature of controlled compressability allows
easy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replace
one windshield or backlite
SCOTCH-BRITE ROLOC SURFACE CONDITIONING DISC #07480
2 IN, COARSE, 25 DISCS PER BOX
Offers ease of disc centering and is used in conjunction with 3M Roloc Disc Pad Assembly 05539
SCOTCH-BRITE ROLOC SURFACE CONDITIONING DISC #07485
3 IN, COARSE, 25 DISCS PER BOX
Offers ease of disc centering and is used in conjunction with 3M Roloc Disc Pad Assembly 05540
3M HEAT SHRINK TUBING
REFILL PACKS #36618, 3/32 IN X 6 IN, 10 PACKS PER CASE
Flexible polyolefin tubing that offers an outstanding balance of electrical, physical and
chemical properties for a wide variety of applications. Assortment contains 3 each of the 7 colors.
278
278
3M AUTOMOTIVE ATTACHMENT TAPE, #06377
GRAY, 1/2 IN X 20 YDS, 30 MIL
Unique, low VOC aerosol product designed to dissolve the deposits that are normally found on the
throttle plate in fuel injected cars. It both cleans and lubricates, while restoring performance
SCOTCH FILAMENT TAPE #06894
18 MM X 55 M
Excellent for bundling elongated metal and wood parts and for sealing and reinforcing
cartons containing heavy items for shipment. Strong - High performance - Adheres instantly.
Tensile strength is 380 lbs./inch
SCOTCH PERFORMANCE MASKING TAPE #26340
GREEN, 8 MM X 55 M
Highly conformable, provides the best adhesive transfer resistance, hugs curves, contours
and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put.
Perfectly balanced to give outstanding masking results.
TARTAN VINYL ELECTRICAL TAPE #49656
3/4 IN X 60 FT
General purpose electrical insulating tape. Economical and durable with
excellent resistance to a wide range of contaminants and weather conditions.
POST-IT LABELING TAPE #06950
3/4 IN X 36 YDS
General purpose removable marking tape which can be used for labeling bin and shelf marking,
package identification and correction and coverup work. Sticks firmly yet removes easily.
SCOTCH PREMIUM HEAVY DUTY PACKAGING TAPE
CLEAR #39523, 48 MM X 50 M
TAN #39524, 48 MM X 50 M
This reusable dispenser makes it extremely convenient to use in a variety of locations without making
an investment in extra dispensers
3M DUCT TAPE SILVER #06969
48 MM X 54.8 M
A general purpose cloth duct tape designed for non-critical applications such as sealing, bundling,
holding, and various miscellaneous applications
279
PERMATEX FAST CURE EPOXY #21425
Convenient premeasured 10 - 4 g mixer cups in packed can epoxy mixer cups. No mess, no guess, no waste.
Ideal for bonding glass, hard plastics, rubber and metal. Bonds in 5-15 minutes. Grey adhesive has excellent
chemical resistance. Fills porosities and can be used to build up worn parts.
Suggested Applications: Loose trim, broken grilles, loose door glass channels and casting cracks and holes
21425
PERMATEX SURFACE INSENSITIVE THREADLOCKER BLUE #24027
OEM specified. Medium/high strength thread-locker for general-purpose applications. Especially well-suited for 1/4" to
3/4" (6mm to 20mm) fasteners that have a slight oil film. Prevents vibration loosening. Oil resistant. Removable with
hand tools for easy disassembly.
Suggested Applications: Rocker studs, rocker adjustment bolts and bolts on valve and cam covers, oil pans,
disc brake calipers, intakes, alternators, and pulley assemblies
6 ML Tube (Carded)
24027
PERMATEX MEDIUM STRENGTH THREADLOCKER BLUE #24200
OEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4"
(6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while
preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for
easy disassembly.
Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment
nuts, carburetor studs
24200
6 ML Tube (Carded)
PERMATEX HIGH STRENGTH THREADLOCKER RED #27100
OEM specified. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially
well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies.
Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal.
Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts
6 ML Tube (Carded)
27100
PERMATEX HIGH TEMPERATURE THREADLOCKER RED #27200
OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents bolts and press fits
3/8" to 1" (10mm to 25mm) from loosening due to shock, severe vibration and heat stress. Exclusive formulation for
newer engines and high performance applications that require extreme temperature resistance.
Suited for temperatures up to 450 F (232 C). Removable with heat and hand tools.
27200
280
10 ML. Bottle
PERMATEX ANTI-SEIZE LUBRICANT #80078
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling,
corrosion and seizing and to assure easier disassembly. Temperature range: -60 F to 1600 F (-51 Cto 871 C).
Salt, corrosion and moisture resistant ñ ideal for marine use. Non-aerosol version meets Mil Spec #907E.
Aerosol - Level 3 8 0z.. Bottle
Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts.
80078
PERMATEX COPPER ANTI-SEIZE LUBRICANT #31163
A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling
where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic
grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30 F to 1800 F
(-34 C to 982 C). Provides good electrical conductivity. Meets Mil Spec #907E. 16 Oz. Brush-Top Bottle
Suggested Applications: Spark plug threads installed in aluminum, exhaust manifold bolts, engine bolts,
oxygen sensors, knock sensors, thermostat housing bolts, fuel filter fittings, and battery cable connections
31163
PERMATEX HIGH TACK SPRAY-A-GASKET SEALANT #80065
Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive. Remains effective
under temperatures of -65 F to 500 F (-54 C to 260 C). Resists gasoline, oil, antifreeze, axle lube, kerosene, propane
and butane. Level 3
12 Oz. Aerosol
80065
Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; seals all felt, cork, metal, paper,
rubber and asbestos gaskets
PERMATEX ULTRA BLUE
MULTIPURPOSE RTV SILICONE GASKET MAKER #81724
OEM specified. Permatex Ultra silicones were developed to meet todayís technology changes. Sensor-safe,
low odor, noncorrosive. Outstanding oil resistance and joint movement values. Eight times more flexible than
cork/composite gaskets; three times more oil resistant than conventional silicones.
3.35 Oz. Tube
Temperature range -65 F to 500 F (-54 C to 260 C) intermittent; resists auto and shop fluids and vibration.
81724
Suggested Applications: Valve covers, oil pans, timing covers, transmission pans, differential covers
PERMATEX HIGH-TEMP RED RTV SILICONE GASKET #91160
OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut
gasket by making reliable ìformed-in-placeî gaskets that resist cracking, shrinking and migrating caused by thermal
cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65 F to 650 F (-54C to 343C) intermittent;
resists auto and shop fluids. First generation 1970-1980 gasket maker.
8 Oz. Tube
Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans
81160
PERMATEX ULTRA BLACK MAXIMUM OIL RESISTANCE
RTV SILICONE GASKET MAKER
#82180
OEM specified. For dealership warranty requirements, ensures extended drivetrain warranty compliance. Fast-curing
formula. Sensor safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility,
oil resistance properties through use of a patented adhesion system. Temperature range -65 F to 500 F
3.35 Oz. Tube
(-54 C to 260 C) intermittent; resists auto and shop fluids and vibration.
Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, transmission pans
82180
281
TECHNICAL CHEMICAL COMPANY
4604
2942
4642
2812
2412
4602
4603
PROFESSIONAL AUTO SERVICE CHEMICALS
2420
PART NO.
DESCRIPTION
CASE QUANTITY
2812
2942
12820
2418
4642
4602
4603
4604
2412
2420
4684
2212
2234
5000
TAC3913
PBBlaster
Power Steering Fluid
Windshield Wash Concentrate
Windshield Wash Pre-Mix Gallons
Non-Chlorinated Brake Cleaner 10 oz.
Carb & Choke Cleaner
Rust Penetrant 10 oz.
Silicane Spray 10 oz.
White Lithium Grease 10 oz.
Disc Brake Quiet 8.5 oz.
Brake Cleaner 18 oz.
Fuel Injection Cleaner 8 oz.
DOT3 Brake Fluid 12 oz.
DOT3 Brake Fluid 32 oz.
Diesel Conditioner 12 oz.
Air Conditioner Odor Treatment
Rust Penetrant 11 oz.
12 per Case
12 per Case
6 per Case
12 per Case
12 per Case
12 per Case
12 per Case
12 per Case
12 per Case
12 per Case
12 per Case
12 per Case
4 per Case
12 per Case
12 per Case
12 per Case
2418
Leave the wrench on the bench..
Get it off faster - with PB Blaster!
REPLACEMENT LUG NUTS
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
41128
41138
41148
41178
41188
12 x 1.25 Chrome Bulge Acorn - 3/4 Hex
7/16 “ Chrome Bulge Acorn - 3/4 Hex
1/2 “ Chrome Bulge Acorn - 3/4 Hex
91138
91148
91178
91188
7/16” Chrome Bulge Acorn - 13/16 Hex
1/2” Chrome Bulge Acorn - 13/16 Hex
71128
71138
71178
71188
12 x 1.25 Chrome Acorn - 13/16 Hex
13 x 1.50 Chrome Acorn - 13/16 Hex
7/16” Chrome Acorn - 13/16 Hex
1/2” Chrome Acorn - 13/16 Hex
5844
5845
5580R
5581R
5586R
12 x 1.25 OE Lug Nut - 21mm Hex
12 x 1.50 OE Lug Nut - 19mm Hex
7/16” OE Lug Nut - 3/4 Hex
282
NOTES
283
NOTES
284
NOTES
285

rh scales co., 73 years of wheel experience!

Transcription

Similar documents

BL-61 WHEEL STAND

Pool of Radiance^Codewheel

View Dr van Niekerk`s presentation

THE NEXT GENERATION!

equal flexx quantity chart.

TIRE and WHEEL

Recondition Wheels for Less than New

Reinventing the Wheel - American Road® Magazine

First Class Wheel and Tire Protection - Mercedes-Benz

VL-Whisper - Clay