Lightning Protection

Transcription

Main Catalogue
Surge Protection
www.dehn.de
Safety Equipment
. . . Your safety is our concern.
Valid from 1st January 2007
This catalogue replaces the Main Catalogue
published in 2005.
We reserve the right to introduce changes in performance, dimensions and material in the course
of technical progress. The figures shown are without obligation.
Misprints, errors and alterations excepted.
Reproduction in any form whatsoever is forbidden without our authorisation.
Publication No. DS427/E/2007
DEHNprofile
2
Conductors
13
Air-termination Systems and Accessories
19
Roof Conductor Holders
71
Conductor Holders
87
Clamps / Bimetallic Components
105
Test Joints / Fixed Earthing Terminals
131
Earthing Electrodes
145
Equipotential Bonding
155
Tools and Accessories
173
Spark Gaps
187
Earthing Material for Telecommunications
197
Index
208
1
DEHN – Safety with Tradition.
Production around 1930.
Centre of lightning and surge protection.
At first there was the idea of
diverting lightning to the
ground without endangering
home or people. This was the
challenge, Hans Dehn met in
his company founded in
Nuremberg in 1910. Since the
beginning of the 1920s DEHN
has produced lightning protection and earthing components.
Over the years, a diversified
product range for external
lightning protection came into
existence.
But not only protecting systems
and buildings against the effects of lightning, but also the
protection of people installing
and maintaining electrical systems became a central requirement.
In 1952, DEHN + SÖHNE amplified their product range by
safety equipment for working
at electrical installations.
The entering of electrical and
electronic equipment in industries, administrations and
households showed soon, that
conventional lightning protection was not sufficient to protect these devices. With the
experience of decades in the
field of external lightning
protection, the necessity of
surge protection came up.
Therefore, the first generation
of surge protective devices
(SPDs) by DEHN + SÖHNE was
introduced to the market in
1954.
Today, the location in Neumarkt, Germany, unifies research and development, production, sales and administration in the fields of lightning protection, surge protection and safety equipment.
Production today.
2
With more than 750 employees,
a process-orientated management, laboratories, computercontrolled production lines and
a wide product range for safety,
DEHN + SÖHNE is a worldwide
recognised and leading familyowned company.
In the course of its history of
nearly 100 years, the initial
handicraft business has become
a worldwide operating industrial company with three product ranges:
DEHN – Products for Safety.
Lightning protection with isolated
air-termination system.
Surge Protection
Safety Equipment
DEHN + SÖHNE is a booster of
technological progress. We do
intensive, application-related
research work for customerorientated solutions. The performance parameters of our impulse current test laboratories
are unique worldwide.
DEHNconductor System.
With the experience in research
and development, production,
quality assurance and application of components for lightning and surge protection as
well as safety equipment, we
have influenced national and
international standardisation
considerably. Our most important aim is to stipulate a maximum quality and safety level.
This has made DEHN + SÖHNE
known as a brand of quality
far beyond the borders of
Germany.
Impulse current laboratory.
3
DEHN – Quality
and Safety.
DEHN + SÖHNE produce more
than 3,500 devices and components for your safety. Our
products protect human lives
and material assets. High quality requirements and the awareness in the treatment of the
environment is therefore a
must.
In order to ensure this and
make it also transparent for
you as our customer, the company was certified in accordance with DIN EN ISO 9001
and DIN EN ISO 14001. Annual
examinations and complete
reaudits every three years show
the central significance of quality and environmental management in the company.
We cooperate intensively with
international and national
standard committees and take
part in congresses worldwide.
We are active members of the
“Ausschuss für Blitzschutz
und Blitzforschung“ (ABB)
[Commission for Lightning
Protection and Research] and
in the “Verband Deutscher
Blitzschutzfirmen (VDB)“
[Association of German
Companies]. Thus, we foster
nationally and internationally
the aims and further development of lightning protection.
Our aim is to provide sophisticated, customer-orientated
solutions to increase the economy of companies. Only those
who are accessible can be
quick, flexible and efficient.
We provide you with the
necessary safety.
4
DEHN + SÖHNE supplies equipment and provides services covering lightning and surge protection worldwide. We have
committed ourselves to continuous market presence, productivity, product quality and delivery in time. Developing innovative and market-related products requires closeness to our
customers. They benefit from
our strength in innovation,
flexibility and short decision
processes.
Sustained success in the market
is only possible if local conditions are considered.
DEHN – Global Safety.
DEHN – Intercepting lightning
everywhere!
Our market presence: 17 sales
offices and 4 outlets in Germany, subsidiaries or representatives in more than 70 countries. Besides continuous participation in international fairs,
DEHN + SÖHNE offers extensive technical support and customer service on the spot.
Additionally, we organise seminars and lectures, and supply
detailed information and
designing material. We contribute to specialist publications
and carry out continuous PR
work.
DEHN – Lightning protection worldwide.
Safety is not just related to the
features and benefits of our
products but can also be
applied to the relationship with
our customers and suppliers.
This means for our partners
that their problems that need
to be solved are in safe hands.
DEHN – Safety through earthing.
5
DEHN – Worldwide.
Algeria
Argentina
Australia
Austria
Belgium
Belize
Bolivia
Brazil
Bulgaria
Canada
Cap Verde
Chile
China
Columbia
Costa Rica
Croatia
Cuba
Czech Republic
Denmark
El Salvador
Estonia
F.Y.R.O.M
Finland
France
Great Britain
Greece
Guatemala
Honduras
Hungary
Iceland
India
Iran
Ireland
Israel
Italy
Japan
Latvia
Lebanon
Lithuania
Luxembourg
Malaysia
Mauritius
Mexico
6
Netherlands
New Zealand
Nicaragua
Nigeria
Norway
Oman
Pakistan
Panama
Peru
Poland
Portugal
Romania
Russia
Saudi Arabia
Serbia
Singapore
Slovakia
Slovenia
South Africa
Spain
Sri Lanka
Sweden
Switzerland
Syria
Taiwan
Thailand
Turkey
Uganda
United Arab Emirates
USA
Venezuela
We shall be pleased to name you
the right contact person at our
subsidiaries or representatives.
Please contact our export
department under
Tel. +49 9181 906 462
Fax +49 9181 906 444
or send an e-mail to
[email protected]
7
DEHN – Keeping you informed.
Already in 1752 Benjamin Franklin
discovered that lightning is an
electrical phenomenon. The invention of the lightning conductor is
based on his contribution. It is
common knowledge today that
lightning protection is more than
just an assembly of an air termination system, down conductors and
earth termination system. An
extensive protection system is
needed which is defined and illustrated in standards. The current
standard series IEC 62305 is an
internationally approved standard.
It is binding, both legally and
technically. This standard series
represents a complete and comprehensive concept for lightning
protection. The new lightning protection standard IEC 62305 consists of the following parts:
IEC 62305-1:
Protection against lightning
Part 1: General principles
Part 1 includes general principles
to be taken into consideration for
lightning protection of buildings,
their installations, persons and
power supply lines. It informs
about the danger of lightning
(sources, causes and kinds of damage), the necessity of lightning
protection and possible protection
measures. Furthermore, it provides
an overview of the entire standard
series about lightning protection
explaining the proceeding and
protection principles, which the
following parts are based on.
IEC 62305-2:
Part 2: Risk management
The risk management according to
IEC 62305-2 uses a risk analysis to
assess whether or not lightning
protection is required. Then, the
optimum level of lightning protection, technically and economically,
is defined. Finally, the residual risk
is calculated. Leading from an
entirely unprotected state of an
object, the remaining risk is
reduced until it is falling below
the acceptable risk. This procedure
can be used to determine the type
of a lightning protection system
according to IEC 62305-3 as well
as for defining a complex protection system against electromagnetic lightning pulses (LEMP)
8
according to IEC 62305-4. This
standard takes protection measures into consideration both for
buildings including persons inside
of them and electrical and electronic systems for power supply
lines.
IEC 62305-3
Part 3: Physical damage to structures and life hazard
This part specifies protection of
structures and life against material damage and injuries with possible fatal consequences caused by
lightning currents or dangerous
sparks especially through direct
lightning strokes. A lightning protection system, as a protection
measure, consists of an external
lightning protection system (airtermination system, down conductors and earth termination system)
and internal lightning protection
system (lightning equipotential
bonding and separation distance).
The lightning protection system is
defined by the protection level,
where the effectiveness of protection level I decreases down to protection level IV. The required protection level is determined with
the risk analysis according to IEC
62305-2 (VDE 0185-305-2), unless
it has not been defined by regulations (e.g. construction regulations
for hospitals, power plants, etc.).
The new lightning protection standard has been decided in international and European consensus. To
be able to take national special
cases into account or to forward
important information to national
users, three additional annexes
(Table 1) have been added to part
3. These annexes not contradictory
to the actual lightning protection
standard and have an informative
nature. However, it has to be
pointed out, that the annexes
reflect nationally the state of the
art and are therefore highly important.
IEC 62305-4
Part 4: Electrical and electronic
systems within structures
The objective of this part is protection of structures with incorporated electrical and electronic sys-
tems against the effects of electromagnetic pulse.
In IEC 62305-4, this complex protection is divided into a series of
concrete individual protection
measures, which designers and
constructors can then combine to
a complete system adapted to the
object to be protected.
EN 50164-1 / VDE 0185
Part 201: Lightning protection
components
Part 1: Requirements for connection components
This section specifies testing procedures for connection components. Our terminals and connecting devices are continuously
checked according to this standard.
Already tested components
are marked with this test
te
symbol:
sted
For further technical details
please see also “Manufacturer
Test Report“ at www.dehn.de
EN 50164-2 / VDE 0185
Part 202 Lightning Protection
Components
Part 2: Requirements for conductors and earth electrodes
This section specifies the requirements on conductors, air termination rods, earth entries and earthing electrodes. It replaces the
existing standard series DIN
488XX.
DEHN + SÖHNE offers components and devices for complete
lightning protection systems
according to IEC 62305.
The present main catalogue contains all components for lightning
protection, earthing and equipotential bonding. If requested, we
will be pleased to send you also
more detailed technical information.
We will continue striving to be
one step ahead of the latest technology. This will be, most importantly, to the advantage of our
partners.
Publications
Our detailed brochures covering
individual products and product
groups provide further technical
information.
DS103 DEHN protects Wind Turbines
DS104 DEHN protects Cell Sites
DS107 Safety for Sewage Plants
DS109 DEHN protects Photovoltaic Systems
DS509 DEHN protects
Further main catalogues
DS396 Safety Equipment
DS570 Surge Protection
Guide
Seminars
DEHN CD
Our Lightning Protection Guide is
an indispensable work equipment
for lightning protection specialists.
It includes procedure documentation, information and lists which
the specialist needs for his work.
The Lightning Protection Guide
shall help to find solutions for
lightning protection problems, to
design and install lightning protection systems, but also to measure and maintain external and
internal lightning protection
systems.
We shall be pleased to send it to
you.
We also give seminars about
DS707 DEHNtour
– Lightning Protection
DS708 Animated films on CD
Contents:
1. State of the art for installation
of lightning protection
systems
– Surge Protection
– Safety Equipment
as well as protection for special
applications like cell sites, photovoltaics, wind turbines, etc..
For more information regarding
topics, dates, locations, etc. please
contact the responsible representative of DEHN + SÖHNE in your
country. They shall be pleased to
give you the requested information.
Note
Like our catalogues and publications, our installation and
mounting instructions
can also be downloaded from our
website www.dehn.de.
Contact
The printed publications can be
ordered free of charge from our
export department
Fax +49 9181 906-444
[email protected]
2. Characteristics of lightning
current
3. Designing a lightning protection system
4. Lightning protection system
5. External lightning protection
6. Internal lightning protection
7. Protection of electrical and
electronic systems against
LEMP
8. Choice, installation and
assembly of surge protective
devices (SPDs)
9. Application proposals
9
DEHN – Technical Explanations.
1. Notes on Application
– DEHNconductor System is a
range of components for installing isolated down-conductor systems.
The most important component
of this product family is the
worldwide unique HVI® conductor. This HVI® conductor is
designed in accordance with
the regulations of high-voltage
engineering to control the disruptive discharge voltages and
creepage discharges arising at
lightning strokes.
Patent No. DE 10228665
– DEHNiso Distance Holder is a
modular fixing programme for
air termination rods, wires/
cables and pipes. Thus, isolated
lightning protection air termination systems can be installed
according to the protective
angle method. At site, e.g.
metal roof mounted element
can be universally integrated
into the protected zone.
– Roof and wall conductor holders with the single screw cleat
DEHNQUICK® for easy installation allow for considerable saving of installation time and
make mounting easier.
– The plastic DEHNsnap® holder
allows for quick and easy installation (inserting the conductor, pushing the cap in without
tools) and offers great advantages due to its technology
(the snap lock is not stressed
mechanically; this prevents any
tripping of the conductor) and
can be used in connection with
different braces as a roof and
wall conductor holder.
– DEHNgrip® is a screwless
stainless steel holder system
that has been included in the
programme as DEHNgrip, a
complete stainless steel unit,
in addition to the plastic DEHNsnap® holder system. Also this
screwless holder system is suitable both as a roof and wall
conductor holder for conductors
Ø8 mm. The conductor is fixed
in DEHNgrip® by a simple pushin. DEHNgrip® can be used as a
10
single element (applied as a
conductor holder) and as a roof
conductor holder in connection
with different braces.
– The DEHNfix® conductor and
rod holder are holders ready to
be driven in and furnished with
a pre-inserted striking dowel.
Cleat, distance holder and striking dowel form one unit. The
system allows for simple, quick
and professional installation.
– DEHNALU-DRAHT, Ø8mm, is
a lightning discharge wire
(according to DIN EN 50164-2)
made of a special aluminium
wrought alloy (also in torque
quality). This wire is suitable for
aboveground installation and
provides considerably better
solidity characteristics than
pure aluminium wires Ø10 mm.
Moreover, it has a light transportation weight, easier handling and high corrosion resistance.
It has to be considered, that,
like all aluminium materials,
also DEHNALU-DRAHT must
not be used in flush-mounted
installations or concrete without plastic coating.
– Components of zinc die casting may be used neither in
flush-mounted installations nor
in soil.
– Hot-dip-galvanised steel is
also suitable for embedding in
concrete.
– Stainless steel (catalogue description: StSt (V2A/V4A); has
been proved to be very resistive
against especially aggressive
environmental conditions and is
suitable for aboveground and
underground installation. For
further information on application as earthing material please
see also DIN VDE 0151/06.86.
– Components with stainless
steel screws.
For reasons of quality improvement, these components are
furnished with stainless steel
screws. Stainless steel screws
emphasise the high quality of
our components. This also
applies to copper components
and has no influence on the
corrosion performance.
Components for earth termination systems include screws
made of material No. 1.4571
(V4A).
– Terminal lugs for connection
between earthing electrodes or
reinforcements in the foundation with earthing electrodes,
which are installed in the soil,
have to be resistant against
corrosion. For this purpose,
stainless steel or isolated terminal lugs can be used.
– In opposition to DIN 1045,
foundation earthing electrodes,
down conductors, earthing and
equipotential bonding conductors made of galvanised steel
may be connected in concrete
with the steel reinforcement.
– Connections of components/
conductors made of different
materials such as St (steel) or
Al (aluminium) with Cu (copper) require additional measures against corrosion. In these
cases bimetallic connectors or
isolating clamps or even inlays
made of double metal (copperplated aluminium sheets or
sleeves) are necessary. Intermediate lead layers are not permissible.
– Using plastic lightning protection components in connection
with roof covers made of roof
sheetings, the material compatibility (long-term endurance)
has to be checked with the
manufacturer of the roof cover
or with our company.
– Connections in the soil have
always to be protected in
accordance with the construction standard IEC 62305-3, i.e.
additionally with a protection
measure against corrosion, e.g.
coating with anticorrosive
bands.
2. Abbreviations
The following list shows and explains all abbreviations mentioned in the
present catalogue.
2.1 Conductor Holders
Abbreviation
in catalogue
CH
Conductor holder
RCH
Roof conductor holder
2.2 Condcutor Types
Abbreviation
in catalogue
Fl
Solid tape conductor
Rd
Solid round conductor
3. Material combinations among air termination systems as well as down conductors
and with parts of the construction
Provided, that no especially aggressive environmental influences
have to be considered, the material combinations listed below have
proved themselves. This is based on practical experience.
Steel
(tZn)
Aluminium
Copper
Stainless TitaSteel
nium
Tin
Steel (tZn)
yes
yes
no
yes
yes
yes
Aluminium
yes
yes
no
yes
yes
yes
Copper
no
no
yes
yes
no
yes
Stainless Steel yes
yes
yes
yes
yes
yes
Titanium
yes
yes
no
yes
yes
yes
Tin
yes
yes
yes
yes
yes
yes
4. Symbols
2.3 Materials
Screws
Abbreviation
in catalogue
Material
Screw heads
a Half-round wood screw h Slot
b Flat head wood screw i Hexagon
j Hexagon with slot
Wood screw with
c threaded
head
Al
Aluminium
AlMgSi
Aluminium magnesium silicon wrought alloy
E-AlMgSi
Electrical aluminium alloy
G-AlMg3
Aluminium casting with magnesium
StSt (V2A)
Stainless steel (Material No. 1.4301/1.4303)
StSt (V4A)
Stainless steel (Material No. 1.4571/1.4401)
St/blank
Steel (black)
eTruss head screw
St/tZn
Steel, hot dip galvanised
St/gal Zn
Steel, galvanised
f Knurled screw
St/Cu
Steel, copper-coated
MCI
Malleable cast iron
MCI/tZn
Malleable cast iron, hot dip galvanised
ZDC
Zinc die casting
GCI
Grey cast iron
Cu
Copper, electrical copper
RCB
Red casting brass
Ms
Brass
Ms/gal Cu
Brass, copper-coated
Ms/gal Sn
Brass, tin-coated
Cu/gal Sn
d
Cheese head screw
k Coss recessed
l Star drive
m Combined slot
g Flat head screw
r
Flat oval head screw
5. Recommended values
Screw
Tightening torque
M5/M6
≥ 4 Nm
M8
≥ 10 Nm
Copper, tin-coated
M10
≥ 20 Nm
Cupal
Copper-plated aluminium
M12
≥ 25 Nm
Sn
Tin
P
Plastic material / Polyethylene / Polyamide / Polystyrene
PVC
Polyvinyl chloride
GFP
Glass-fibre reinforced plastic
UP
Polyester (unsaturated)
PA
Polyamide
EVA
Ethylene vinyl acetate copolymer
XLPE
Cross-linked polyethylene
11
12
www.dehn.de
Conductors
Air termination system on roof
Earth conductor in
concrete foundation
Installation of
earth ring conductor
13
Solid Round Conductors
CONDUCTORS
840 008
840 108
840 018
840 010
840 118
800 008
800 010
800 108
800 110
830 008
For use in lightning protection and earth-termination
systems according to DIN EN 50164-2
(VDE 0185 Part 202)
A
Conductor Cross
Ø
section
B
C
Material
Characteristics
Material No.
D
Standard
F
E
Coating
Outer Ø material
Coating Approx. ring
thickness weight/length
Part
No.
A MODEL
DEHNALU-DRAHT®
Aluminium (Al) and aluminium magnesium silicon wrought alloy (AlMgSi) must not be installed directly (without distance)
on the surface, within or below cast, mortar or concrete nor within soil.
8 mm
50 mm2
AlMgSi
medium hard DIN EN 50164-2
20 kg / 148 m
840 008
8 mm
50 mm2
AlMgSi
medium hard DIN EN 50164-2
3 kg / 21 m
840 108
8 mm
50 mm2
AlMgSi soft-twistable DIN EN 50164-2
20 kg / 148 m
840 018
10 mm
78 mm2
Al
DIN EN 50164-2
21 kg / 100 m
840 010
B MODEL
DEHNALU-DRAHT®
Aluminium conductor with plastic coating (halogen-free).
For surface or flush mounting or installation within cast, mortar or concrete
8 mm
50 mm2
AlMgSi
soft
DIN EN 50164-2 11 mm
plastic
1.5 mm
20 kg / 100 m
840 118
50 kg / 127 m
50 kg / 81 m
800 008
800 010
33 kg / 75 m
34 kg / 50 m
800 108
800 110
45 kg / 100 m
9 kg / 20 m
45 kg / 100 m
830 008
830 108
830 038
50 kg / 125 m
50 kg / 80 m
12 kg / 20 m
50 kg / 125 m
50 kg / 80 m
12 kg / 20 m
860 908
860 910
860 920
860 008
860 010
860 020
C MODEL
Steel conductor, zinc coating = 50 μm mean value (approx. 350 g/m2)
8 mm
50 mm2
St/tZn
DIN EN 50164-2
10 mm
78 mm2
St/tZn
DIN EN 50164-2
D MODEL
Steel conductor, zinc coating = 50 μm mean value (approx. 350 g/m2) with plastic coating
8 mm
50 mm2
St/tZn
DIN EN 50164-2 11 mm
plastic
1.5 mm
10 mm
78 mm2
St/tZn
DIN EN 50164-2 13 mm
plastic
1.5 mm
E MODEL
Copper conductor
8 mm
50 mm2
8 mm
50 mm2
8 mm
50 mm2
Cu
Cu
Cu
soft F20
DIN EN 50164-2
soft F20
DIN EN 50164-2
medium hard F25 DIN EN 50164-2
F MODEL
Stainless steel conductor
According to DIN VDE 0151, stainless steel elements to be installed in soil (Rd 10 mm)
have to be made of material No. 1.4571 (V4A).
8 mm
50 mm2 StSt (V2A)
1.4301
DIN EN 50164-2
10 mm
78 mm2 StSt (V2A)
1.4301
DIN EN 50164-2
10 mm
78 mm2 StSt (V2A)
1.4301
DIN EN 50164-2
8 mm
50 mm2 StSt (V4A)
1.4571
DIN EN 50164-2
10 mm
78 mm2 StSt (V4A)
1.4571
DIN EN 50164-2
10 mm
78 mm2 StSt (V4A)
1.4571
DIN EN 50164-2
Conductor materials can only be delivered with the original ring weights.
Further conductor materials and other materials defined by standard series VDE 0185 are available on request.
14
www.dehn.de
830 108
830 038
860 908
860 910
860 920
860 008
860 010
860 020
276 056
276 057
CONDUCTORS
Sleeve for Use as Edge for Dripping Water
Prevents the dripping of rain along the round
conductor. Thus the façade is not polluted.
B
A
Material
Rd
conductor
Colour
Diameter
Ø
Hole
Ø
PU
pc(s)
Part
No.
8 mm
1
37 mm
7.5 mm
100 276 056
8 mm
1
37 mm
7.5 mm
100 276 057
A MODEL
plastic
B MODEL
plastic
www.dehn.de
15
Tape Conductors
810 225
810 335
852 335
810 304
810 404
810 405
CONDUCTORS
For use in earth-termination and lightning protection
systems as well as for ring equipotential bonding
according to DIN EN 50164-2 (VDE 0185 Part 202).
B
A
Width
Thickness
C
Cross section
Material
Characteristics
Material No. Standard
Approx. ring
weight/length
Part
No.
A MODEL
Steel tape, zinc coating = 70 μm mean value (approx. 500 g/m2)
20 mm
2.5 mm
50 mm2
St/tZn
30 mm
3.5 mm
105 mm2
St/tZn
30 mm
3.5 mm
105 mm2
St/tZn
30 mm
4 mm
120 mm2
St/tZn
40 mm
4 mm
160 mm2
St/tZn
40 mm
5 mm
200 mm2
St/tZn
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
40 kg / 100 m
42 kg / 50 m
21 kg / 25 m
50 kg / 52 m
50 kg / 40 m
50 kg / 30 m
810 225
810 335
852 335
810 304
810 404
810 405
DIN EN 50164-2
45 kg / 100 m
831 225
Stainless steel tape
According to DIN VDE 0151, Material No. 1.4571 (V4A) has to be used for stainless steel in soil.
30 mm
3.5 mm
105 mm2
StSt (V2A)
1.4301
DIN EN 50164-2
30 mm
3.5 mm
105 mm2
StSt (V2A)
1.4301
DIN EN 50164-2
30 mm
3.5 mm
105 mm2
StSt (V4A)
1.4571
DIN EN 50164-2
30 mm
3.5 mm
105 mm2
StSt (V4A)
1.4571
DIN EN 50164-2
21 kg / 25 m
50 kg / 60 m
21 kg / 25 m
50 kg / 60 m
860 925
860 900
860 325
860 335
B MODEL
Copper tape
20 mm
2.5 mm
50 mm2
Cu
C MODEL
Tape conductors of other dimensions and materials available on request.
16
www.dehn.de
831 225
860 925
860 900
860 325
860 335
860 115
860 130
860 215
860 230
CONDUCTORS
Terminal Lugs (set)
A For connecting the down conductors to the earth
termination system made of corrosion-resistant
stainless steel (StSt (V4A)), material No. 1.4571.
In accordance with DIN EN 50164-2 (VDE 0185
Part 202).
B
A
Material
Length
(l1)
Dimension
Cross
section
Material
No.
Standard
PU
pc(s)
Part
No.
Ø10 mm
Ø10 mm
78 mm2
78 mm2
1.4571
1.4571
DIN EN 50164-2
DIN EN 50164-2
1 860 115
1 860 130
30x3.5 mm
30x3.5 mm
105 mm2
105 mm2
1.4571
1.4571
DIN EN 50164-2
DIN EN 50164-2
1 860 215
1 860 230
A MODEL
Solid round conductors
StSt (V4A)
1500 mm
StSt (V4A)
3000 mm
B
B MODEL
Solid tape conductors
StSt (V4A)
1500 mm
StSt (V4A)
3000 mm
Other dimensions available on request.
www.dehn.de
17
Stranded Conductors
CONDUCTORS
840 050
801 050
832 739
832 740
832 192
832 193
For use in lightning protection and earth-termination
systems.
B
A
Cross
section
Structure
Qty. x Ø conductor
C
D
Approx. ring
weight/length
Part
No.
Stranded aluminium conductors
Aluminium (Al) must not be installed directly (without distance) on the surface, within or below cast,
mortar or concrete nor within soil.
50 mm2
19 x 1.8 mm
Al
DIN EN 50164-2
9 mm
13.5 kg / 100 m
840 050
Material
Standard
Outer Ø
A MODEL
B MODEL
Stranded steel conductors
42 mm2
114 x 0.65 mm
St/gal Zn
10 mm
35 kg / 100 m
801 050
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
9 mm
9 mm
10.5 mm
10.5 mm
12.5 mm
22 kg / 50 m
44 kg / 100 m
30 kg / 50 m
60 kg / 100 m
42 kg / 50 m
832 739
832 740
832 192
832 193
832 095
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
9 mm
10.5 mm
12.5 mm
44 kg / 100 m
60 kg / 100 m
42 kg / 50 m
832 839
832 292
832 295
C MODEL
Stranded copper conductors
50 mm2
7 x 3 mm
50 mm2
7 x 3 mm
70 mm2
19 x 2.1 mm
70 mm2
19 x 2.1 mm
95 mm2
19 x 2.5 mm
Cu
Cu
Cu
Cu
Cu
D MODEL
Stranded copper conductors with tin coating
50 mm2
19 x 1,8 mm
Cu/gal Sn
70 mm2
19 x 2.1 mm
Cu/gal Sn
95 mm2
19 x 2.5 mm
Cu/gal Sn
Stranded conductors with other dimensions and materials available on request.
18
www.dehn.de
832 095
832 839
832 292
832 295
Air Termination Systems and Accessories
Self-supporting air termination rods
Isolated air termination system
Air termination rods
Steel telescopic lightning protection masts
19
Air-Termination Rods
AIR-TERMINATION SYSTEMS
AND ACCESSORIES
104 100
104 150
104 200
104 250
104 300
483 100
483 125
483 150
483 200
104 903
104 905
104 906
104 107
104 157
102 152
102 211
102 252
103 210
103 220
103 230
103 240
A
For protection of roof-mounted elements, chimneys, etc.,
also for installation with concrete bases
From free lengths of 2.5 m, an additional fixing device,
e.g. DEHNiso distance holder, is required for installation
with a concrete base for protection against to the
upcoming wind loads.
A
Total
length (l1)
B
C
Material
Relevant
standard
AlMgSi
AlMgSi
AlMgSi
AlMgSi
AlMgSi
St/tZn
St/tZn
St/tZn
St/tZn
StSt (V4A)
StSt (V4A)
StSt (V4A)
Cu
Cu
AlMgSi
AlMgSi
AlMgSi
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
DIN EN 50164-2
D
Cross section
Ø
Thread
F
E
For wedged
concrete bases
For threaded
concrete bases
PU
pc(s)
Part
No.
3
3
3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
104 100
104 150
104 200
104 250
104 300
483 100
483 125
483 150
483 200
104 903
104 905
104 906
104 107
104 157
102 152
102 211
102 252
3
3
3
3
3
3
10
10
10
10
10
10
10
10
10
10
10
10
10
103 210
103 220
103 230
103 240
103 250
103 260
103 280
103 211
103 221
103 231
103 241
103 251
103 261
A MODEL
Chamfered
1000 mm
1500 mm
2000 mm
2500 mm
3000 mm
1000 mm
1250 mm
1500 mm
2000 mm
1000 mm
1500 mm
2000 mm
1000 mm
1500 mm
1500 mm
2000 mm
2500 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
3
3
3
3
3
3
3
3
3
3
3
3
3
3
M16
M16
M16
B MODEL
Diminished by 1000 mm each
1500 mm
AlMgSi
DIN EN 50164-2
2000 mm
AlMgSi
DIN EN 50164-2
2500 mm
AlMgSi
DIN EN 50164-2
3000 mm
AlMgSi
DIN EN 50164-2
3500 mm
AlMgSi
DIN EN 50164-2
4000 mm
AlMgSi
DIN EN 50164-2
5000 mm
AlMgSi
DIN EN 50164-2
1500 mm
AlMgSi
DIN EN 50164-2
2000 mm
AlMgSi
DIN EN 50164-2
2500 mm
AlMgSi
DIN EN 50164-2
3000 mm
AlMgSi
DIN EN 50164-2
3500 mm
AlMgSi
DIN EN 50164-2
4000 mm
AlMgSi
DIN EN 50164-2
B
C
16/10 mm
16/10 mm
16/10 mm
16/10 mm
16/10 mm
16/10 mm
16/10 mm
16/10 mm
16/10 mm
16/10 mm
16/10 mm
16/10 mm
16/10 mm
3
3
3
3
3
3
3
M16
M16
M16
M16
M16
M16
C MODEL
Diameter 16 mm, with forged tab and KS screw for connecting Rd conductors 7-10 mm
1000 mm
St/tZn
DIN EN 50164-2
16 mm
1500 mm
St/tZn
DIN EN 50164-2
16 mm
10 100 100
10 100 150
D MODEL
Diameter 10 mm, chamfered, especially for wedged concrete bases, 8.5 kg (Part No. 102 075)
1000 mm
Al
DIN EN 50164-2
10 mm
3
D
10 101 000
E MODEL
Pipe-shape air-termination rods, each diminished by 1000 mm, light unit
1500 mm
AlMgSi
DIN EN 50164-2
16/10 mm
2000 mm
AlMgSi
DIN EN 50164-2
16/10 mm
2500 mm
AlMgSi
DIN EN 50164-2
16/10 mm
3000 mm
AlMgSi
DIN EN 50164-2
16/10 mm
3500 mm
AlMgSi
DIN EN 50164-2
16/10 mm
4000 mm
AlMgSi
DIN EN 50164-2
16/10 mm
5000 mm
AlMgSi
DIN EN 50164-2
16/10 mm
3
3
3
3
3
3
3
10
10
10
10
10
10
10
103 410
103 420
103 430
103 440
103 450
103 460
103 480
F MODEL
Diameter 16 mm, chamfered, for cutting to length
6000 mm
AlMgSi
DIN EN 50164-2
16 mm
20
1 104 600
www.dehn.de
E
103 250
103 260
103 280
103 211
103 221
103 231
103 241
103 251
103 261
100 100
100 150
101 000
103 410
103 420
103 430
103 440
103 450
103 460
103 480
104 600
AND ACCESSORIES
385 216
Connecting Sleeve for
Air Termination Rods
With central stud for connecting air termination rods
to greater lengths (transport length).
Using the connecting sleeve requires an additional fixing above the sleeve at the air termination rod.
te
Material
Al
Clamping range
Rd / Rd
Screw
Screw
material
Outer
Ø
16 / 16 mm
di M8x12 mm
StSt (V2A)
28 mm
123 109
PU
pc(s)
sted
Part
No.
10 385 216
Air-termination Rods for Ridge and Hip Tiles
For protection of e.g. modules of solar heating systems
or photovoltaic systems, or other types of elements
installed on gable roofs.
The installation of the air-termination rod is based on a
clamping technique. The gradually adjustable elements
have to be set according to the respective diameter of
the hip tile beforehand.
Rod
material
Al
Length
Diameter
Ø
Clip
material
Clamping range
1000 mm
10 mm
StSt (V2A)
120-240 mm
PU
pc(s)
Part
No.
1 123 109
For further information please see also installation instructions No. 1528.
Tested according to DIN EN 50164-1
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
21
Self-supporting
Air-termination Rods
105 400
105 450
105 500
105 550
105 600
105 650
AND ACCESSORIES
With hinged tripod support for protection of greater
roof-mounted elements, with adjustment to the roof
inclination of max. 10 degrees.
The air-termination rods are dimensioned for wind
velocities up to 145 km/h (wind load zone II according
to DIN 4131).
A
The stackable concrete base (Part No. 102 010) and
the flat washer (Part No. 102 050) have to be ordered
separately.
Components:
– Pipe Ø40 x 5 mm
– Reduced air-termination rod Ø16/10 mm
– Terminal for Rd conductors 6-10 mm
– Tripod support for wedged concrete bases
B
B
A
Height
Length (l1) Length (l2)
(Ø40x5)
(Ø16/10)
Radius
Space requirements Qty. of
of support
bases
Support
material
Rod
material
PU
pc(s)
Part
No.
A MODEL
Up to a height of 5.5 m
4000 mm
2000 mm
4500 mm
2000 mm
5000 mm
3000 mm
5500 mm
3000 mm
2000 mm
2500 mm
2000 mm
2500 mm
560 mm
560 mm
560 mm
560 mm
1180x1320 mm
1180x1320 mm
1180x1320 mm
1180x1320 mm
3
3
6
6
St/tZn
St/tZn
St/tZn
St/tZn
Al
Al
Al
Al
1
1
1
1
105 400
105 450
105 500
105 550
Up to a height of 8.5 m, with adjustable StSt braces Ø10 mm
6000 mm
4000 mm
2000 mm
1435 mm
2490x2830 mm
6500 mm
4000 mm
2500 mm
1435 mm
2490x2830 mm
7000 mm
5000 mm
2000 mm
1435 mm
2490x2830 mm
7500 mm
5000 mm
2500 mm
1435 mm
2490x2830 mm
8000 mm
6000 mm
2000 mm
1435 mm
2490x2830 mm
8500 mm
6000 mm
2500 mm
1435 mm
2490x2830 mm
6
6
6
6
9
9
St/tZn
St/tZn
St/tZn
St/tZn
St/tZn
St/tZn
Al
Al
Al
Al
Al
Al
1
1
1
1
1
1
105 600
105 650
105 700
105 750
105 800
105 850
B MODEL
For further information please see also installation instructions No. 1436.
Types with shorter transport lengths (separable pipe) available on request.
22
www.dehn.de
105 700
105 750
105 800
105 850
105 202
105 203
105 214
105 215
105 216
D40 Air-termination Rods
AND ACCESSORIES
For free lengths up to 5.5 m, for fixing e.g. at walls or other types of constructions.
For combination with air-termination rods Ø16/10 mm, diminished, e.g.
length 2000 mm, Part No. 103 221 or length 2500 mm, Part No. 103 231
(to be ordered separately).
The air-termination rods are dimensioned for wind velocities up to
145 km/h (wind load zone II according to DIN 4131).
Components:
– Pipe Ø40x5 mm with threaded head (M16)
– Lock nut M16
– Earth connection St/tZn with KS connector made of StSt (V2A)
The rods are fixed e.g. at a wall with Part No. 105 140, and at pipes with
Part No. 105 354.
The maximum free length refers to the tip of the air-termination rod up to
the top support (fixing point).
For reasons of stability, the middle support (3x fixing points) should be
installed as close to the top support as possible.
The distance inbetween, however, must not be more than 15 cm.
The bottom support (fixing point) has to be installed in the area of less
than or equal to 15 cm at the end of the air-termination rod.
Length (l1)
Pipe
N
N
N
N
N
Max. free length (l2) with air- Free clamping length (l3) with airtermination rod 2000/2500 mm termination rod 2000/2500 mm
2000 mm
3000 mm
4000 mm
5000 mm
6000 mm
3500 / 4000 mm
4000 / 4500 mm
4500 / 5000 mm
5500 / 5500 mm
5500 / 5500 mm
500 mm
1000 mm
1500 mm
1500 / 2000 mm
2500 / 3000 mm
Quantity
of fixings
2
2
3
3
3
Rod
PU
material pc(s)
Al
Al
Al
Al
Al
1
1
1
1
1
Part
No.
105 202
105 203
105 214
105 215
105 216
A
105 140
105 354
105 160
Support for D40 Air-termination Rods
B
A
C
Fixing
holes Ø
Material
Wall distance
Clamping range
Pipe Ø
B
C
Clamping range of
air-termination rod
Screw
material
PU
pc(s)
Part
No.
40 mm
StSt (V2A)
1 105 140
40 / 50 mm
StSt (V2A)
5 105 354
40 mm
StSt (V2A)
1 105 160
A MODEL
N
Wall fixing
StSt (V2A)
8x5.1 / 4x11 mm
80 mm
B MODEL
N
Rail fixing
StSt (V2A)
1 … to 2 “ 48-60 mm
C MODEL
N
www.dehn.de
Fixing clamp with tensioning strap
StSt (V2A)
New Products
N
90 - 300 mm
23
Telescopic Lightning Protection AIR-TERMINATION SYSTEMS
Masts with Screw-in Foundation
AND ACCESSORIES
103 121
103 122
103 123
103 124
Air-termination mast for protection against direct lightning strokes at special installations, e.g. biogas plants,
PV installations on open spaces etc.
The masts are installed into a screw-in foundation.
No digging or foundation work is required. The screw-in
foundation is simply screwed into soil without requiring
special preparation and fixed additionally with earth
rods.
The masts are designed for wind velocities up to
These calculations are based on a pressing power of
0.02 kN/cm2 of the soil (e.g. loamy soil, sandy soil,
gravelly soil with medium density).
Components:
– Air-termination mast out of St/tZn and Al, diminished
Ø70/60/40 mm
– Air-termination rod out of Al Ø16/10 mm,
length 1 or 2 m with M16 thread
– Screw-in foundation out of St/tZn, length 800 mm
with brace, length 530 mm and locking screws M10
with lock nut
– Terminal brackets for earth connection, hole Ø11 mm
For additional fixing, 3 earth rods Ø 20 mm, length
1500 mm are required for additional fixing of each
screw-in foundation (to be ordered separately).
Material
Height above
ground (l1)
Pipe length
Ø70
Pipe length
Ø60 (l2)
Pipe length
Ø40 (l3)
Air-termination rod
(d1) (l4)
PU
pc(s)
St/tZn / Al
St/tZn / Al
St/tZn / Al
St/tZn / Al
St/tZn / Al
St/tZn / Al
6000 mm
7000 mm
8000 mm
9000 mm
10000 mm
11000 mm
1700 mm
1700 mm
1700 mm
1700 mm
1700 mm
1700 mm
2000 mm
2000 mm
4000 mm
4000 mm
6000 mm
6000 mm
2000 mm
2000 mm
2000 mm
2000 mm
2000 mm
2000 mm
16 / 1000 mm
16/10 / 2000 mm
16 / 1000 mm
16/10 / 2000 mm
16 / 1000 mm
16/10 / 2000 mm
1
1
1
1
1
1
Part
No.
103 121
103 122
103 123
103 124
103 125
103 126
N
N
N
N
N
N
For further details please see also installation instructions No. 1581.
24
N
New Products
www.dehn.de
103 125
103 126
103 130
AIR-TERMINATION SYSTEMS Telescopic Lightning Protection
AND ACCESSORIES
Masts for Concrete Foundations
Air-termination mast for protection against lightning
strokes into special installations, e.g. biogas plants,
photovoltaic systems on open spaces, ammunition
dumps, etc.
The masts are installed into concrete foundations.
For details regarding the foundation, please see also
installation instructions No. 1574.
The masts are designed for wind velocities up to
h
The plug-in system provides the advantage of only one
transport length of 3.5 m.
Components:
earth connection M10
– Air-termination rod out of Al Ø16/10 mm, length 2 m,
with M16 thread and lock nut
– Earth connection with screw M10 x 20 mm
e
103 127
103 128
103 129
d
foundation a x b
Material
N
N
N
N
St/tZn
St/tZn
St/tZn
St/tZn
Height above
ground (h)
Mast parts
Mast Ø (d)
Digging
depth (e)
Foundation
(a x b)
Weight
PU
pc(s)
13000 mm
16000 mm
19000 mm
21500 mm
4
5
6
7
227 mm
247 mm
266 mm
283 mm
1500 mm
1500 mm
1500 mm
2000 mm
1025x1025 mm
1100x1100 mm
1240x1240 mm
1500x1500 mm
approx. 230 kg
approx. 308 kg
approx. 413 kg
approx. 548 kg
1
1
1
1
Part
No.
103 127
103 128
103 129
103 130
Customised types in other lengths available on request.
www.dehn.de
New Products
N
25
Air-termination Rods
for Metal Roofs
123 021
AND ACCESSORIES
For protection of roof-mounted elements, domelights,
etc.
The air termination rods are fixed on roofs with the
holes (Ø11 mm) at the ends of the braces and with four
conductor holders. The conductor holders have to be
chosen according to the roof involved (profile: e.g.
standing seam, Part No. 365 059, or round standing
seam, Part No. 223 010).
Using the four conductor holders (clamps) for the corresponding roof profile, the lightning current carrying
capability is provided.
Total
length
Length
(Ø16)
Length
(Ø10)
Profile
distance
Fixing
hole Ø
Rod
material
Brace
material
Nut/Washer
material
2000 mm
1000 mm
1000 mm
230-520 mm
11 mm
Al
StSt (V2A)
StSt (V2A)
PU
pc(s)
Part
No.
1 123 021
Types with lengths 1.5 or 2.5 m available on request.
for Trapezoidal Roofs
123 031
For protection of roof superstructures, domelights, etc.
The air-termination rod is installed into the low point of
the trapezoidal roof. With the variable basic frame it
can be adjusted to any trapezoidal shape.
The special support allows to compensate roof inclinations up to 10°.
Due to the integrated protection against slipping, the
surface of the roof cannot be damaged.
This air termination rod is dimensioned for wind velocities up to 145 km/h (wind load zone II according to
DIN 4131)
Total
length
Length
(Ø10)
Length
(Ø16)
Profile
distance
Air-termination
rod material
Base
material
Brace
material
2000 mm
1000 mm
1000 mm
600-770 mm
Al
plastic
Al
26
PU
pc(s)
Part
No.
1 123 031
www.dehn.de
102 010
102 075
102 340
102 002
102 003
A
AND ACCESSORIES
Concrete Bases
For air termination rods, for protection of minor roof
superstructures on flat roofs or for installing distance
holders of the DEHNiso Distance Holder programme
for e.g. isolated ring conductors
B
Weight
C
B
A
Diameter
Ø
Material
D
Wedge/Adapter
material
E
PU
pc(s)
Part
No.
A MODEL
Wedged, stackable, for air-termination rods Ø16 mm, chamfered or diminished, or DEHNiso distance holder Ø16 mm
17 kg
337 mm
concrete (B55)
StSt (V2A)
1 102 010
C
B MODEL
Wedged, for air-termination rods, 1000 mm long, Ø10 mm or DEHNiso distance holder, up to 675 mm long, Ø16 mm (distance
1 m)
8.5 kg
240 mm
concrete (B55)
1 102 075
StSt (V2A)
C MODEL
Wedged, with adapted flat washer, stackable
17 kg
337 mm
concrete (B55)
StSt (V2A)
1 102 340
plastic
1 102 002
D MODEL
With threaded adapter, for air-termination rods with M16 thread
17 kg
337 mm
concrete (B55)
E MODEL
With threaded adapter, for air-termination rods with M16 thread and additional fixing with e.g. distance holder
8.5 kg
240 mm
concrete (B55)
plastic
1 102 003
D
E
www.dehn.de
27
Flat Washer
For protection of the roof sheetings under the concrete
base
A
Diameter
Ø (d1)
102 050
102 060
AND ACCESSORIES
A
B
Diameter
Ø (d2)
PU
pc(s)
Part
No.
Material
Colour
EVA
1
1 102 050
EVA
1
1 102 060
A MODEL
For concrete bases (Part Nos. 102 010, 102 002)
370 mm
360 mm
B
B MODEL
280 mm
270 mm
28
www.dehn.de
AND ACCESSORIES
Installation
Installation of air-termination rods or ring conductors with concrete
bases under consideration of the different wind load zones according
to DIN 4131
zone IV
Kiel
Rostock
Schwerin
Hamburg
zone III
zone II
Bremen
Berlin
Hannover
Potsdam
Magedburg
Halle
Essen
Dortmund
Leipzig
Düsseldorf
Erfurt
Köln
Dresden
Chemnitz
Bonn
Frankfurt
zone I
Wiesbaden
Würzburg
Nürnberg
Saarbrücken
Mannheim
Regensburg
Stuttgart
Zone
Augsburg
Freiburg
I
II
III
IV
München
Dynamic
pressure
q [kN/m2]
0.8
1.05
1.4
1.7
Wind
Wind
velocity strength
v [km/h]
126.7
145.1
12 - 17
161.5
184.7
Fig. 1: Division of Germany into wind load zones and corresponding values of dynamic pressure and maximum wind velocity
Ref.: DIN 4131:1331-11. Steel radio towers and masts, Berlin: Beuth-Verlag GmbH
The calculations are based on the following parameters:
– Ground level up to 600 m above sea level (asl)
– Ground level up to 40 m
– Constant dynamic pressure
– No natural oscillations
– No additional safety coefficients as well as
– No ice foundations
Air-termination rod
Zone I
Zone II
Zone III
Zone IV
The following data about the height of the ring conductor (solid round conductor Al D = 8 mm), distance
and type or quantity of concrete bases are based on
wind load zone II.
Height of
Distance of concrete bases
ring conductor
Middle / Middle
1.5 m
675 mm
1000 mm
2.0 m
1000 mm
1200 mm
1500 mm
1200 mm
2.5 m
3.0 m
on request
on request
on request
The above applies to all reduced air-termination rods.
The distance holder has to be installed approximately in the middle of the air-termination rod.
Legend:
1 x Concrete Base (weight 8.5 kg), Part No. 102 075
1 x Concrete Base (weight 17 kg), Part No. 102 010
2 x Concrete Base, stacked (weight 34 kg), Part No. 102 010
1 x Concrete Base (weight 17 kg), Part No. 102 010
with distance holder out of GFP, Part No. 106 120
www.dehn.de
29
Adapter for Air Termination Rods AIR-TERMINATION SYSTEMS
AND ACCESSORIES
106 008
For uprighting air termination rods at roof inclinations
up to 10°, for wedged concrete bases
(Part No. 102 010 or 102 340)
Angle of
inclination
up to 10 degrees
Support
material
Clamping
range
Bolt
material
Screw
type
Screw
St/tZn
16 mm
StSt (V2A)
M8/M10 mm
StSt (V2A)
PU
pc(s)
Part
No.
1 106 008
Rod Holder for Gable Roofs
223 005
For use as foot for fixing air termination rods on gable
roofs with protection against twisting (toothed washer)
and lock nut.
The air termination rod has to be fixed additionally,
e.g. to the chimney with DEHNiso distance holder
Material
St/tZn
30
Bolt
material
Brace
length
CH
Rd
Screw/Nut
material
Screw
StSt (V2A)
475 mm
16 mm
StSt (V2A)
di M8x20
PU
pc(s)
Part
No.
1 223 005
www.dehn.de
110 000
110 017
Air Termination Tips
AND ACCESSORIES
For sealing the ends of air termination conductors
A
B
A
B
Material
Conductor
Rd
PU
pc(s)
Part
No.
Length
Outer Ø
29 mm
15 mm
50 110 000
29 mm
14 mm
10 110 017
A MODEL
For steel or aluminium conductors
ZDC
7-10 mm
B MODEL
For copper conductors
Ms/gal Cu
8 mm
108 001
Mushroom-type Collectors
For walkable and drivable flat roofs, e.g. parking levels
Clamp
material
Collector
material
Rd/Fl
connection
Installation
depth
Levelling
range
Standard
St/tZn
G-AlMg3
7-10 / 30 mm
min. 60 mm
25 mm
DIN 48832
PU
pc(s)
Part
No.
5 108 001
For details please see also installation instructions No. 1505
www.dehn.de
31
Roof Bushings
For penetrating and sealing roofs to install down conductor systems
A
Material
552 030
552 010
AND ACCESSORIES
A
B
Colour
Bushings
Rd
Bushings
Fl
Diameter
Ø
PU
pc(s)
Part
No.
8 / 10 / 16 mm
20x2.5 / 30x3.5 mm
250 mm
25 552 030
34 mm
25 552 010
B
A MODEL
For flat roofs (height approx. 113 mm)
plastic
1
B MODEL
For tile roofs and corrugated roof sheetings (borehole Ø16 mm)
plastic
8-10 mm
1
Note on Part No. 552 030:
For installation heights of more than 100 mm, wrap the roof bushing and conductor with a self-adhesive universal sealing tape (aluminium fixing tape).
32
www.dehn.de
AND ACCESSORIES
DEHNiso Distance Holder
Angled support with saddle clamp
Distance holder with attachment, fixing socket connector and
tightning strap
Angled fixing plate
Variable angled support with pipe clamp
Installed air-termination system with distance holders and concrete bases
Ref.: Wettingfeld Lightning Protection, Krefeld, Germany
www.dehn.de
33
DEHNiso Distance Holder I
Variable range of holders for conductors and air termination rods for keeping the separation distance.
Allows for fixing of air-termination rods,
distance rod made of glass fibre reinforced plastic
(GFP), Ø16 mm, UV-stabilised, light grey colour
For determining the separation distance (length of the
distance rod), the material factor km = 0.7 is used.
1 m distance rod corresponds to an equivalent clearance of 0.7 m.
B
A
106 115
106 120
106 123
106 090
106 100
AND ACCESSORIES
C
A
D
B
CH
Rd
CH
height
CH
material
Length
(l1)
Insolating
distance
Fixing
hole Ø
Plate
material
PU
pc(s)
Part
No.
445 mm
605 mm
945 mm
445 mm
605 mm
945 mm
8x5.1 / 4x7 / 2x11 mm
8x5.1 / 4x7 / 2x11 mm
8x5.1 / 4x7 / 2x11 mm
8x5.1 / 4x7 / 2x11 mm
8x5.1 / 4x7 / 2x11 mm
8x5.1 / 4x7 / 2x11 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
1
1
1
1
1
1
Distance holder with DEHNgrip conductor holder and fixing plate, loose conductor leading
8 mm
20
StSt (V2A)
690 mm
605 mm
8x5.1 / 4x7 / 2x11 mm
StSt (V2A)
1 106 110
A MODEL
Distance holder with twin screw cleat and fixing plate
16 mm
20
ZDC-St/tZn
530 mm
16 mm
20
ZDC-St/tZn
690 mm
16 mm
20
ZDC-St/tZn
1030 mm
7-10 mm
20
ZDC-St/tZn
530 mm
7-10 mm
20
ZDC-St/tZn
690 mm
7-10 mm
20
ZDC-St/tZn
1030 mm
106 115
106 120
106 123
106 090
106 100
106 105
B MODEL
C MODEL
Distance holder for concrete bases (Part No. 102 075) with DEHNgrip conductor holder, loose conductor leading
8 mm
20
StSt (V2A)
675 mm
590 mm
1 106 160
C
D MODEL
Distance holder for concrete bases (Part No. 102 075) with MMV clamp, fixed conductor leading, e.g. for crossovers
6-10 mm
StSt (V2A)
675 mm
590 mm
1 106 150
Distance rods with other lengths available on request.
D
34
www.dehn.de
106 105
106 110
106 160
106 150
106 225
106 226
106 228
106 235
106 236
106 238
106 245
106 246
106 248
A
DEHNiso Distance Holder II
AND ACCESSORIES
Variable range of holders for conductors and air termination rods for keeping the separation distance.
Distance rod made of glass fibre reinforced plastic
(GFP) Ø16 mm, UV-stabilised, light grey colour.
B
A
CH
Rd
B
CH
height
CH
material
Length
(l1)
Isolating
distance
Pipe clamping
range Ø
Socket Fixing element
material
material
C
PU
pc(s)
Part
No.
A MODEL
Distance holder with pipe clamp 1 … to 2”
16 mm
20
ZDC-St/tZn
530 mm
16 mm
20
ZDC-St/tZn
690 mm
16 mm
20
ZDC-St/tZn 1030 mm
445 mm
605 mm
945 mm
1 … to 2 “ 48 - 60 mm
1 … to 2 “ 48 - 60 mm
1 … to 2 “ 48 - 60 mm
ZDC
ZDC
ZDC
StSt (V2A)
StSt (V2A)
StSt (V2A)
1 106 225
1 106 226
1 106 228
445 mm
605 mm
945 mm
2 † to 3 “ 70 - 90 mm
2 † to 3 “ 70 - 90 mm
2 † to 3 “ 70 - 90 mm
ZDC
ZDC
ZDC
StSt (V2A)
StSt (V2A)
StSt (V2A)
1 106 235
1 106 236
1 106 238
445 mm
605 mm
945 mm
50 - 300 mm
50 - 300 mm
50 - 300 mm
ZDC
ZDC
ZDC
StSt (V2A)
StSt (V2A)
StSt (V2A)
1 106 245
1 106 246
1 106 248
B MODEL
Distance holder with pipe clamp 2 † to 3”
16 mm
20
ZDC-St/tZn
530 mm
16 mm
20
ZDC-St/tZn
690 mm
16 mm
20
ZDC-St/tZn 1030 mm
C MODEL
Distance holder with pipe clamp
16 mm
20
ZDC-St/tZn
16 mm
20
ZDC-St/tZn
16 mm
20
ZDC-St/tZn
530 mm
690 mm
1030 mm
C
www.dehn.de
35
Single Parts
AND ACCESSORIES
Distance Rod
For cutting variable lengths
Material
GFP
Diameter
Ø
16 mm
Colour
1
PU
Part
pc(s)
No.
1 106 125
Length
3000 mm
106 125
Fixing Socket Connector
106 126
For variable fixing of conductor and rod holders at the distance rod (Ø16 mm),
with female M8 thread
Socket conn.
material
ZDC
Female
thread
M8
Diameter
Ø
23 mm
Screw
type
di M8x12 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
20 106 126
106 127
Fixing Plate
Base plate for fixing the distance holder or distance rod (Ø16 mm),
e.g. at parts of the construction
Base plate Socket conn.
material
material
StSt (V2A)
ZDC
Fixing
hole Ø
Dimension
(l x w x t)
Screw
type
Screw
material
8x5.1 / 4x7 / 2x11 mm 170x40x3 mm di M8x12 mm StSt (V2A)
PU
pc(s)
Part
No.
20 106 127
275 010
Conductor Holder
For fixing conductors at the fixing socket connector with M8 screw
CH
material
ZDC-St/tZn
CH
Rd
7-10 mm
CH
height
20 mm
Conductor
leading
fixed
Screw
type
g M8x30 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
50 275 010
275 016
Rod Holder
For fixing air termination rods at the fixing socket connector with M8 screw
CH
material
ZDC-St/tZn
CH
Rd
CH
height
Conductor
leading
Screw
type
Screw
material
16 mm
20 mm
fixed
g M8x30 mm
StSt (V2A)
PU
pc(s)
Part
No.
50 275 016
Distance Holder with Conductor Holder
106 165
106 170
106 175
106 178
106 180
106 185
For fixing conductors on different base parts, fixed conductor leading
CH
Rd
7-10 mm
7-10 mm
7-10 mm
CH
height
20 mm
20 mm
20 mm
CH
material
ZDC-St/tZn
ZDC-St/tZn
ZDC-St/tZn
Length
515 mm
675 mm
1015 mm
Isolating
distance
435 mm
595 mm
935 mm
Socket conn. PU
Part
material
pc(s)
No.
Al
1 106 165
Al
1 106 170
Al
1 106 175
Distance Holder with Rod Holder
For fixing air termination rods on different base parts, fixed conductor leading
CH
Rd
16 mm
16 mm
16 mm
36
CH
height
20 mm
20 mm
20 mm
CH
material
ZDC-St/tZn
ZDC-St/tZn
ZDC-St/tZn
Length
515 mm
675 mm
1015 mm
Isolating
distance
435 mm
595 mm
935 mm
Socket conn. PU
Part
material
pc(s)
No.
Al
1 106 178
Al
1 106 180
Al
1 106 185
www.dehn.de
AND ACCESSORIES
Single Parts
106 301
Clamping Bolt
Threaded (M10), nut, toothed lock washer and screw for support of the distance rod
Bolt
material
Al
Clamping
range Rd
16 mm
Screw
type
di M8x12 mm
Screw/Nut
material
StSt (V2A)
PU
Part
pc(s)
No.
20 106 301
106 311
Angled Fixing Plate
With clamping bolt for distance rod (Ø16 mm)
Material
StSt (V2A)
Angle
90 °
Fixing
hole Ø
4x5.1 / 2x6.5 / 2x11 mm
Dimension
(l x w x h)
110x60x30 mm
PU
Part
pc(s)
No.
20 106 311
106 310
Angled Fixing Plate
For DEHNiso and DEHNiso Combi, hole Ø11 mm
Material
StSt (V2A)
Angle
90 °
Fixing
hole Ø
4x5.1 / 2x6.5 / 2x11 mm
Dimension
(l x w x h)
110x60x30 mm
PU
Part
pc(s)
No.
20 106 310
106 315
Angled Fixing Plate
For DEHNiso, hole Ø11 mm
Material
StSt (V2A)
Angle
45 °
Fixing
hole Ø
4x5.1 / 2x6.5 / 2x11 mm
Dimension
(l x w x h)
104x54x30 mm
PU
Part
pc(s)
No.
20 106 315
106 316
Y-shape Angled Fixing Plate
With clamping bolt for distance rod (Ø16 mm)
Material
StSt (V2A)
Angle
90 °
Fixing
hole Ø
8x5.1 / 4x6.5 / 4x11 mm
Dimension
(l x w x h)
132x155x30 mm
PU
Part
pc(s)
No.
20 106 316
106 352
Pipe Clamps
With fixing socket connector for distance rod (Ø16 mm), for pipes up to 2”
Clamp
material
StSt (V2A)
www.dehn.de
Clamping range Socket conn.
Screw
Screw/Nut
Ø pipe
material
type
material
1 … - 2 “ 48-60 mm ZDC e M8x50 / di M8x12 mm StSt (V2A)
PU
Part
pc(s)
No.
10 106 352
37
Single Parts
AND ACCESSORIES
106 353
Pipe Clamps
Clamp
Screw
material
Ø pipe
material
type
StSt (V2A) 2 † - 3 “ 70-90 mm ZDC e M8x70 / di M8x12 mm
Screw/Nut
material
StSt (V2A)
PU
Part
pc(s)
No.
10 106 353
106 312
Fixing Equipment for Railings
For square pipes with socket for distance rod
Material
ZDC / StSt (V2A)
Clamping range
of square profile
20x20 to 50x50 mm
Screw
e M8x70 / di M8x12 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
5 106 312
106 321
Clip for fixing the Distance Holder at Pipes
Fixing with tensioning straps up to 30 mm (e.g. downpipe clamp, Part No. 423 209,
or tensioning strap with grip holder, Part No. 106 323), with clamping bolt
Clip
material
StSt (V2A)
Bolt
material
Al
Slot width
(l x w)
32x6 mm
PU
Part
pc(s)
No.
10 106 321
106 322
Attachment with Fixing Socket Connector
For fixing distance holders at pipes, e.g. with tensioning strap, Part No. 106 323
Material
StSt (V2A)
Slot width
(l x w)
26x6 mm
Clamping
range Rd
16 mm
Socket conn.
material
ZDC
PU
Part
pc(s)
No.
10 106 322
106 323
Pipe Clamp for Attachment and Clip
For fixing (tensioning) the clip (Part No. 106 321) or the attachment with fixing socket
connector (Part No. 106 322) at different pipes
Head/Strap
material
StSt (V2A)
38
Clamping
range Ø
90 to 300 mm
Strap
Screw
(l x w x t)
type
1100x25x0.3 mm di M8x20 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
10 106 323
www.dehn.de
AND ACCESSORIES
106 324
Single Parts
Separate grip holder, for combination with continuous tensioning strap (Part No. 540 901) for
greater pipe diameters, e.g. for attachment with fixing socket connector (Part No. 106 322)
Head/Strap
material
StSt (V2A)
Strap
(l x w x t)
for 25x0.3 mm
Screw
type
di M8x20 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
20 106 324
Earthing Pipe Clamps
540 901
Continuous tensioning strap (100 m long)
Strap dimension
(l x w x t)
... x25x0.3 mm
Material
StSt (V2A)
PU
Part
pc(s)
No.
1 540 901
106 325
Adapter for Angled Support
For air termination rods (Ø16 mm), with 2 clamping bolts for distance rod (Ø16 mm)
Material
StSt (V2A)
Clamping
range Rd
16/16 mm
Screw
type
dj M6x12 / di M8x12 mm
Screw/Nut
material
StSt (V2A)
PU
Part
pc(s)
No.
10 106 325
106 326
Adapter for Angled Support
For DEHNiso Combi insulating pipes (Ø50 mm), with 2 clamping bolts for distance rod (Ø16 mm)
Material
StSt (V2A)
Clamping
range Rd
50/16 mm
Screw
type
di M8x12 mm
Screw/Nut
material
StSt (V2A)
PU
Part
pc(s)
No.
10 106 326
106 327
Adapter for Support
of DEHNiso Combi pipe (Ø50 mm) and distance rod with cleat (Ø16 mm)
Material
StSt (V2A)
Clamping
range Rd
50/16 mm
Screw
Screw/Nut
type
material
di M8x12 / dj M6x12 mm StSt (V2A)
PU
Part
pc(s)
No.
10 106 327
106 345
Air Termination Rod
Air termination rod for distance rod (Ø16 mm) e.g. for installation with concrete base
Rod
material
StSt (V2A)
www.dehn.de
Rod
(l x Ø)
500x8 mm
Socket conn.
material
ZDC
PU
Part
pc(s)
No.
1 106 345
39
Single Parts
AND ACCESSORIES
106 341
Fixing Adapter
For saddle clamps and terminals, angled
Fixing
rod
StSt (V2A)
Rod Ø
8 mm
Angle
90 °
Socket conn.
material
ZDC
PU
Part
pc(s)
No.
20 106 341
Fixing Adapter
106 342
For saddle clamps and terminals, angled
Fixing
rod
StSt (V2A)
Rod Ø
8 mm
Angle
130 °
Socket conn.
material
ZDC
PU
Part
pc(s)
No.
20 106 342
Fixing Adapter
106 340
For saddle clamps and terminals, straight
Fixing
rod
StSt (V2A)
Rod Ø
8 mm
Angle
0°
Socket conn.
material
ZDC
PU
Part
pc(s)
No.
20 106 340
MV Terminal
393 069
Especially for fixing air termination rods at the distance rod without fixing socket connector
Material
StSt (V2A)
40
CH
Rd
16/16 mm
Conductor
leading
fixed
Screw
type
e M10x50 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
50 393 069
www.dehn.de
AND ACCESSORIES
DEHNiso Combi
Isolated air-termination system for roof superstructures
Equipment for fixing insulating pipes at
railings
Angled fixing plate for insulating pipes
www.dehn.de
Isolated air-termination
system for septic tanks
41
DEHNiso Combi Sets
AND ACCESSORIES
A
Components for separate (isolated) air termination systems for protection of major roof-mounted elements,
e.g. air conditioning systems, recooling plants, etc.
For determining the separation distance (length of the
distance rod), material factor km = 0.7 is used.
A 1 m distance rod corresponds to an equivalent air
clearance of 0.7 m.
B
C
Total
length
Quantity of
distance holders
Quantity of
angled fixing plates
Length of
insulating pipe
Insulating pipe
material
PU
pc(s)
Part
No.
A MODEL
1-part unit, total length 4200 mm,
consisting of
1x air termination tip Al, L = 1000 mm (Part No. 105 071)
1x insulating pipe GFP/Al, L = 3200 mm (Part No. 105 300)
2x angled fixing plate for wall mounting StSt (V2A) (Part No. 105 340)
1x distance holder GFP/Al, L = 1030 mm (Part No. 106 331)
4200 mm
1
2
3200 mm
GFP/Al
1 105 440
GFP/Al
1 105 455
GFP/Al
1 105 470
B MODEL
1-part unit, total length 5700 mm,
consisting of
5700 mm
2
3
4700 mm
C MODEL
2-part unit, total length 7200 mm (transport length 3200 mm)
consisting of
7200 mm
3
3
6200 mm
For further details, please see also installation instructions No. 1475.
42
www.dehn.de
105 440
105 455
105 470
DEHNiso Combi I
AND ACCESSORIES
Components for separate (isolated) air terminations systems for protection of major roof superstructures,
e.g. air conditioning systems, recooling systems, etc.
105 071
Air-termination Tip with MV Terminal
For screwing into the top of the insulating pipe and for fixing the air termination conductors
(wires or stranded conductors) with M10 threads
Tip
material
Al
Material of
Tip
MV terminal
(l x Ø)
StSt (V2A) 1000x10 mm
Clamping
range Rd
8-10 mm
PU
Part
pc(s)
No.
1 105 071
Thread
M10
MV Clamp for Spanning
105 079
For screwing into the top of the insulating pipe with M10 screws,
in order to support spanning of conductors
Clamping
range Rd
8-10 mm
Material
StSt (V2A)
Screw
type
M10x30
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
1 105 079
te
sted
Insulating Pipes GFP/Al
105 300
For isolated construction of air-termination systems and fixing of the HVI® conductor.
105 301
Single-part unit
Insulating pipe
material
GFP / Al
GFP / Al
Length of
insulating pipe
Outer Ø
Transport
length
Isolating
clearance
3200 mm
4700 mm
50 mm
50 mm
3200 mm
4700 mm
1535 mm
1535 mm
PU
pc(s)
Part
No.
1 105 300
1 105 301
2-part unit
Insulating pipe
material
GFP / Al
105 302
Length of
insulating pipe
6200 mm
Outer Ø
50 mm
Transport
length
3200/3000 mm
Isolating
clearance
1535 mm
PU
Part
pc(s)
No.
1 105 302
105 340
Angled Fixing Plate
For fixing the insulating pipes at the construction to be protected or at walls
Plate
Fixing
material
holes Ø
StSt (V2A) 8x5.1 / 4x11 mm
Length
320 mm
Clamping range of Wall / Angle Screw
insulating pipe
distance
material
50 mm
80 mm
StSt (V2A)
PU
Part
pc(s)
No.
1 105 340
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
43
DEHNiso-Combi I
Single Parts
AND ACCESSORIES
105 341
Angled Fixing Plate
Plate
Fixing
material
holes Ø
StSt (V2A) 8x5.2 / 4x11 mm
Length
152 mm
Clamping range of Wall / Angle
insulating pipe
distance
50 mm
80 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
1 105 341
105 342
Angled Fixing Plate
Plate
Fixing
Clamping range of Wall / Angle Screw
material
holes Ø
Length insulating pipe
distance
material
StSt (V2A) 8x5.1 / 4x7 / 2x11 mm 170 mm
50 mm
46 mm
StSt (V2A)
PU
Part
pc(s)
No.
1 105 342
N
105 360
Fixing Clamp with Tensioning Strap
For fixing the insulating pipes at construction elements, e.g. antenna poles
Clip
material
StSt (V2A)
Clamping
range
90 - 300 mm
Material of
tensioning strap
StSt (V2A)
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
1 105 360
105 361
For fixing the insulating pipes at construction elements, e.g. antenna masts
With additional spacer to adjust supports of sector antennas at poles
Clip
material
StSt (V2A)
Clamping
range
90 - 300 mm
Material of
tensioning strap
StSt (V2A)
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
1 105 361
Spacer
30 mm (Al)
105 362
For fixing the insulating pipes at construction elements, e.g. antenna masts
With additional long spacer to adjust supports of sector antennas at poles
Clip
material
StSt (V2A)
44
Clamping
range
90 - 300 mm
Material of
tensioning strap
StSt (V2A)
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
1 105 362
Spacer
95 mm (Al)
N
New Products
N
www.dehn.de
AND ACCESSORIES
DEHNiso-Combi I
Single Parts
105 354
Fixing Equipment for Railings
For fixing the insulating pipes at construction elements, e.g. railing pipes
For pipes
Clamping range
Screw Clamping range of PU
Part
Material
Ø pipe
Screw
material insulating pipe pc(s)
No.
StSt (V2A) 1 … to 2 “ 48-60 mm eM8x40/e M8x50 mm StSt (V2A)
40 / 50 mm
5 105 354
105 355
For pipes
Clamping range
Screw Clamping range of PU
Part
Material
Ø pipe
Screw
material insulating pipe pc(s)
No.
StSt (V2A) 2 † to 3 “ 70-90 mm eM8x40/eM8x70 mm StSt (V2A)
50 mm
5 105 355
105 356
For square pipes
Clamping range
Screw Clamping range PU
Part
Material
of square profile
Screw
material of insulating pipe pc(s)
No.
StSt (V2A) 20x20 to 50x50 mm eM8x40/eM8x70 mm StSt (V2A)
50 mm
5 105 356
106 312
For square pipes with socket for distance rod
Material
ZDC / StSt (V2A)
Clamping range
of square profile
20x20 to 50x50 mm
Screw
e M8x70 / di M8x12 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
5 106 312
106 121
Clamp for insulating pipe with distance rod (Ø16 mm, length 200 mm),
for fixing the insulating rods, e.g. at projections
Material
StSt (V2A)
www.dehn.de
Screw
di M8x16 mm
Screw
material
StSt (V2A)
Clamping range
of insulating pipe
50 mm
PU
Part
pc(s)
No.
1 106 121
45
DEHNiso-Combi I
Single Parts
AND ACCESSORIES
106 352
Pipe Clamps
Clamp
Screw
material
Ø pipe
material
type
StSt (V2A) 1 … - 2 “ 48-60 mm
ZDC eM8x50 / di M8x12 mm
Screw/Nut
material
StSt (V2A)
PU
Part
pc(s)
No.
10 106 352
106 353
Pipe Clamps
Clamp
Screw
material
Ø pipe
material
type
StSt (V2A) 2 † - 3 “ 70-90 mm
ZDC eM8x70 / di M8x12 mm
Screw/Nut
material
StSt (V2A)
PU
Part
pc(s)
No.
10 106 353
Distance Holder for Insulating Pipes
106 330
106 328
For isolated fixing of the conductor at the insulating pipe, clamping range: 50 mm
Holder Fixing element
material
material
GFP
StSt (V2A)
GFP
StSt (V2A)
GFP
StSt (V2A)
CH
material
ZDC-St/tZn
ZDC-St/tZn
ZDC-St/tZn
CH
CH
Rd
height Length
7-10 mm
20
530 mm
7-10 mm
20
690 mm
7-10 mm
20 1030 mm
Isolating Clamping range
Part
distance of insulating pipe
No.
445 mm
50 mm
106 330
605 mm
50 mm
106 328
945 mm
50 mm
106 331
105 200
Tripod Support for DEHNiso Combi
For free installation of the insulating pipes (Part No. 105 300 or 105 440),
without additional fixing at construction elements.
Allows for adjusting to roof inclinations up to 10°.
For insulating pipes, length 3200 mm Ø50 mm
Support
material
St/tZn
46
Quantity of
bases
Radius
Space requirements
of support
6/9
560 mm
1180x1320 mm
PU
pc(s)
Part
No.
1 105 200
www.dehn.de
106 331
AND ACCESSORIES
For preventing dangerous flashovers among parts of
external lightning protection systems and internal conductive parts (electrical installation, conduits, etc.),
keeping the separation distance s is an important
requirement to be considered when designing and
realising a lightning protection system.
Keeping the separation distance s is often a problem
for both new and existing installations.
With the innovative solution of HVI® Conductor of the
“DEHNconductor System” range, this requirement can
be fulfilled.
Function of HVI® Conductor:
Without additional protective measures, high impulse
voltages cause flashovers on surfaces of insulating
materials. This effect is known as a creeping flashover.
If the so-called creepage discharge inception voltage is
exceeded, a surface sparkover is initiated that can
range over a distance of some metres without problem.
DEHNconductor System
For avoiding creepage discharges, the new HVI® Conductor is supplied with a special external coating that
allows to “direct” high “lightning impulse voltages”
to a reference potential. For this purpose, the special
external coating is connected with the equipotential
bonding of the building (free of partial lightning currents) in the area of the sealing unit.
This can be performed at e.g. metal, earthed roofmounted elements situated in the protection area of
the lightning protection system, at earthed parts of the
building construction which is free of lightning currents, or at the protective conductor of the low voltage
system.
No metal parts may be situated within separation distance s from the sensitive sealing unit area.
Isolated air-termination system with isolated down conductor system for a
cell site installation
www.dehn.de
Insulating pipe with HVI® conductor at a cell site mast
47
air-termination rod
Al L = 1000 mm
Part No. 101 001
α
α
AND ACCESSORIES
protective angle acc. to
IEC 62305 Part 3, Table 3
sealing unit area
terminal plate
Part No. 301 229
head piece
cable tie
e.g. fixing clamp;
StSt 90 mm to 300 mm,
Part No. 105 360
connection to
equipotential
bonding
of the building
Fixing clamp with tensioning strap
for insulating pipes
insulating pipe;
GFP/AI, L = 3200 mm
Part No. 105 300
EB connecting element
antenna
equipotential bonding e.g.
to the earthed radio base
station (RBS)
HVI Conductor I
EB terminal
Part No. 405 020
earth connection
element
earth-termination
system
Schematic illustration
HVI® Conductor – Parallel leading
Isolated air-termination system at a roof superstructure with HVI® Conductor
48
HVI® Conductor I along brickwork
www.dehn.de
819 020
819 023
819 021
819 024
819 022
819 025
A
AND ACCESSORIES
HVI® Conductor
High-voltage resistant insulating down conductor HVI®
conductor for keeping the separation distance from
conductive parts according to DIN VDE V 0185-3
Equivalent separation distance s = 0.75 m (in air).
Patent No. DE 10228665
Minimum order length: 4 m.
Please confirm the length required when placing your
order.
3 different types of HVI® Conductor are available:
HVI® Conductor I can be used for connecting the airtermination system of the external lightning protection
system directly to the earthing system of the building.
B
HVI® Conductor II is used for connecting e.g. several
parts of the installation to be protected, not individually
but together, to the earthing system of the building via
an isolated ring conductor.
HVI® Conductor III with a fixed sealing unit and a sealing end to be established on site, is usually used where
the total conductor length cannot be defined exactly
when designing the installation. HVI® Conductor III can
be used just like HVI® Conductor II.
HVI® Conductors I and III may be shortened but not
extended.
B
A
Conductor
material
Insulation
material
Coating
material
Colour of
conductor
C
Core
cross section
Outer Ø
of conductor
PU
pc(s)
Part
No.
19 mm
19 mm
20 mm
23 mm
1 819 020
1 819 023
HVI® Conductor II
with two head pieces and two connection elements for equipotential bonding
Cu
PE
PVC
19 mm
1
Cu
PE
PVC
19 mm
1
20 mm
23 mm
1 819 021
1 819 024
A MODEL
C
HVI® Conductor I
with one head piece and one connection element for equipotential bonding
Cu
PE
PVC
1
Cu
PE
PVC
1
B MODEL
C MODEL
HVI® Conductor III
with one head piece, one connection element and two connection elements for equipotential bonding.
One connection element for equipotential bonding and one connection element are loosely included in delivery
Cu
PE
PVC
19 mm
20 mm
1
Cu
PE
PVC
19 mm
23 mm
1
1 819 022
1 819 025
For further information about the DEHNconductor System please see also installation instructions No. 1566.
For being a customised product (with specified conductor length), please understand that the conductors cannot be returned.
www.dehn.de
49
HVI® Conductor
in Insulating Pipe
819 320
819 323
819 321
819 324
819 322
AND ACCESSORIES
Visually adapted installation of HVI® conductor inside
of an insulating pipe.
A
Insulating pipe
material
B
Length of
insulating pipe
C
D
Outer Ø of
conductor
E
A
D
B
E
C
F
F
Colour of
conductor
PU
pc(s)
Part
No.
A MODEL
HVI® Conductor I
Installed into the insulating pipe, with special internal sealing unit and air termination tip
GFP/Al
3200 mm
20 mm
1
GFP/Al
3200 mm
23 mm
1
1 819 320
1 819 323
B MODEL
HVI® Conductor II
GFP/Al
3200 mm
20 mm
1
GFP/Al
3200 mm
23 mm
1
1 819 321
1 819 324
C MODEL
HVI® Conductor III
GFP/Al
3200 mm
20 mm
1
GFP/Al
3200 mm
23 mm
1
1 819 322
1 819 325
D MODEL
HVI® Conductor I
Installed into the insulating pipe, with special internal sealing unit and air-termination tip D 16/10 mm, length 2500 mm
GFP/Al
3200 mm
20 mm
1 819 360
1
N
E MODEL
HVI® Conductor II
Installed into the insulating pipe, with special internal sealing unit and air-termination rod D 16/10 mm, length 2500 mm
GFP/Al
3200 mm
20 mm
1 819 361
1
N
F MODEL
HVI® Conductor III
Installed into the insulating pipe, with special internal sealing unit and air-termination rod D 16/10 mm, length 2500 mm
GFP/Al
3200 mm
20 mm
1 819 362
1
N
Minimum order length 6 m, please confirm the conductor length required when placing your order.
Note: For being customised products (length according to specification), please understand that the conductors cannot be returned.
50
N
New Products
www.dehn.de
819 325
819 360
819 361
819 362
AND ACCESSORIES
Single Parts
101 001
Air Termination Tip with Lock Nut
For screwing into the top of the insulating pipe
and for connecting the HVI® conductor
Diameter
Ø
10 mm
Material
Al
105 300
Length
1000 mm
Thread
M10
Nut
material
StSt (V2A)
PU
Part
pc(s)
No.
1 101 001
105 301
For isolated construction of air-termination systems and fixing the HVI® conductor.
Single-part unit
Insulating pipe
material
GFP / Al
GFP / Al
Length of
insulating pipe
3200 mm
4700 mm
Outer Ø
50 mm
50 mm
Transport
length
3200 mm
4700 mm
Isolating
clearance
1535 mm
1535 mm
PU
Part
pc(s)
No.
1 105 300
1 105 301
2-part unit
Insulating pipe
material
GFP / Al
Length of
insulating pipe
6200 mm
Outer Ø
50 mm
Transport
length
3200/3000 mm
Isolating
clearance
1535 mm
PU
Part
pc(s)
No.
1 105 302
105 302
105 310
For isolated construction of air-termination systems and fixing the HVI® conductor.
Single-part unit with air-termination tips on the side, D8 mm, length 500 mm, StSt (V2A)
N
Insulating pipe
material
GFP / Al
Length of
insulating pipe
3235 mm
Outer Ø
50 mm
Transport
length
3235 mm
Isolating
clearance
1535 mm
PU
Part
pc(s)
No.
1 105 310
For isolated construction of air-termination systems and fixing of the HVI® conductor.
Single-part unit combined with air-temination rod D16/10 mm, length 2500 mm
105 306
N
www.dehn.de
Insulating pipe
material
GFP / Al
New Products
N
Length of
insulating pipe
3200 mm
Outer Ø
50 mm
Transport
length
3200 mm
Isolating
clearance
1535 mm
PU
Part
pc(s)
No.
1 105 306
51
Single Parts
AND ACCESSORIES
105 360
For fixing the insulating pipes at construction elements, e.g. antenna poles
Clip
material
StSt (V2A)
Clamping
range
90 - 300 mm
Material of
tensioning strap
StSt (V2A)
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
1 105 360
105 361
With additional spacer to adjust supports of sector antennas at poles
Clip
material
StSt (V2A)
Clamping
range
90 - 300 mm
Material of
tensioning strap
StSt (V2A)
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
1 105 361
Spacer
30 mm (Al)
105 362
With additional long spacer to adjust supports of sector antennas at poles
Clip
material
StSt (V2A)
Clamping
range
90 - 300 mm
Material of
tensioning strap
StSt (V2A)
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
1 105 362
Spacer
95 mm (Al)
N
105 340
Angled Fixing Plate
Plate
Fixing
Clamping range of Wall / Angle
Screw
material
holes Ø
Length
insulating pipe
distance
material
StSt (V2A) 8x5.1 / 4x11 mm 320 mm
50 mm
80 mm
StSt (V2A)
PU
Part
pc(s)
No.
1 105 340
Connecting Plate
301 229
For connecting the HVI® conductor to the air termination tip with two KS connectors
including spring washer
te
te
52
sted
sted
Plate
material
StSt (V2A)
KS connector
material
StSt (V2A)
Clamping
range Rd
6-10 mm
Spring washer
3
Dimension
(l x w x t)
63x30x3 mm
PU
Part
pc(s)
No.
1 301 229
(VDE 0185 Part 201): 2000-04
N
New Products
www.dehn.de
AND ACCESSORIES
Single Parts
Connecting Plate
301 239
For connecting the HVI® conductor to the air termination tip with two KS connectors
including spring washer
Plate
material
StSt (V2A)
KS connector
material
StSt (V2A)
Clamping
range Rd
16 / 6-10 mm
Spring washer
3
Dimension
(l x w x t)
63x30x3 mm
PU
Part
pc(s)
No.
1 301 239
te
sted
te
sted
KS Connector
301 019
Single-part unit, with M10 screw and nut
KS
screw
StSt (V2A)
Clamp
material
StSt (V2A)
Clamping
range Rd
6-10 mm
Spring
washer
3
Nut
material
StSt (V2A)
PU
Part
pc(s)
No.
100 301 019
405 020
EB Terminal
For connecting the special coating of the HVI® conductors to the equipotential bonding
Clamp
material
St/tZn
275 220
Clamping
range Ø
20 mm
Cross-sectional
Cleat
area
material
4-95 mm2
StSt (V2A)
Screw
Screw
material
dm M6x16 mm StSt (V2A)
PU
Part
pc(s)
No.
25 405 020
Holder for HVI® Conductor
275 225
For wall mounting and for mounting within sealing unit ranges
CH
material
PA
PA
CH
Rd
20 mm
23 mm
Thread
M8
M8
Fixing
hole
6.5 mm
6.5 mm
Screw
type
r M6x16 mm
r M6x16 mm
PU
Part
pc(s)
No.
25 275 220
25 275 225
275 229
StSt for wall mounting with twin screw cleat
(outside of the sealing unit range)
CH
material
StSt (V2A)
CH
Rd
20 mm
Fixing
hole
6.5x16 mm
Screw
type
dm M6x14 mm
PU
Part
pc(s)
No.
50 275 229
275 120
ZDC-StSt for wall mounting with twin-screw cleat
(outside of the sealing unit range)
CH
material
ZDC / StSt (V2A)
CH
Rd
20 mm
Thread
M8
Fixing
hole
6.5 mm
Screw
type
dm M6x16 mm
PU
Part
pc(s)
No.
25 275 120
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
53
Single Parts
AND ACCESSORIES
275 820
275 823
With frame dowel for heat insulation interconnected systems
CH
material
PA
PA
CH
Rd
20 mm
23 mm
Fixing
hole
8.5 mm
8.5 mm
Screw
type
b l (TX40) 7x180 mm
b l (TX40) 7x180 mm
PU
Part
pc(s)
No.
25 275 820
25 275 823
For solid brickworks for fixing the conductor holder (Part No. 275 220 or 275 225)
for sealing unit ranges
106 760
Note: For installation at honeycomb bricks, no driving when drilling
CH
material
GFP
Fixing
hole
8 mm
Thread
M8x6 mm
PU
Part
pc(s)
No.
25 106 760
275 330
Conductor Holder with Tensioning Strap
With PA conductor holder
CH
material
PA
PA
CH
Rd
20 mm
23 mm
Clamping range
Ø pipe
50-300 mm
50-300 mm
Screw
r M6x16 mm
r M6x16 mm
Screw
material
StSt (V2A)
StSt (V2A)
PU
Part
pc(s)
No.
1 275 330
1 275 333
Conductor Holder with Tensioning Strap
275 320
With metal conductor holder
CH
material
ZDC / StSt (V2A)
CH
Clamping range
Rd
Ø pipe
Screw
20 mm
50-300 mm
dm M6x16 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
1 275 320
Adapter for installing HVI® Conductors on flat Roofs
106 816
Rod adapter for fixing conductor holders (e.g. Part No. 275 220 or 275 225)
in wedged concrete bases (Part No. 102 075)
Material
Al
Thread
M8
Length
150 mm
Diameter
Ø
16 mm
PU
Part
pc(s)
No.
10 106 816
253 015
Roof Conductor Holder, for flat Roofs
With single conductor holder Type FB, in accordance with DIN 48829
Conductor
CH
leading
material
loose
plastic
54
CH
colour
1
CH
Rd
8 mm
Stone
Weight
concrete (B45) 1 kg
Dimension
PU
Part
(l x w x h) pc(s)
No.
100x100x70 mm 10 253 015
www.dehn.de
275 333
AND ACCESSORIES
Single Parts
253 026
Adapter for installation on flat roofs with roof conductor holder Type FB (Part No. 253 015)
Snap-on unit
Material
plastic
CH
Rd
20 mm
Colour
1
PU
Part
pc(s)
No.
50 253 026
253 027
Adapter for installation on flat roofs with roof conductor holder Type FB (Part No. 253 015)
N
Material
plastic
CH
Rd
23 mm
Colour
1
PU
Part
pc(s)
No.
50 253 027
Adapter for Roof Conductor Holders
106 898
Adapter for fixing plastic conductor holders with M8 thread on different roof conductor holder
bases (standard conductor holder is removed)
N
202 831
Material
plastic
Thread
M8
Female
thread
M6
Length
30 mm
PU
Part
pc(s)
No.
25 106 898
Colour
light beige
Roof Conductor Holder with Brace for HVI® Conductor
202 841
For installing the HVI conductor on roof surfaces of gable roofs
With straight brace
RCH
material
St/tZn
St/tZn
202 830
CH
material
PA
PA
Conductor
leading
fixed
fixed
CH
Rd
20 mm
23 mm
Brace
height
55 mm
55 mm
Brace
length
260 mm
260 mm
PU
Part
pc(s)
No.
25 202 831
25 202 841
202 840
With angled brace
RCH
material
St/tZn
St/tZn
202 832
CH
material
PA
PA
Conductor
leading
fixed
fixed
CH
Rd
20 mm
23 mm
Brace
height
55 mm
55 mm
Brace
length
115 mm
115 mm
PU
Part
pc(s)
No.
25 202 830
25 202 840
202 842
With cranked brace
RCH
material
St/tZn
St/tZn
www.dehn.de
New Products
CH
material
PA
PA
N
Conductor
leading
fixed
fixed
CH
Rd
20 mm
23 mm
Brace
height
55 mm
55 mm
Brace
length
260 mm
260 mm
PU
Part
pc(s)
No.
25 202 832
25 202 842
55
Single Parts
AND ACCESSORIES
106 812
Distance Holder for HVI® Conductor
With polyamide conductor holder (Part No. 275 220 or 275 225)
for sealing unit ranges
Distance holder
material
GFP
GFP
Length
1000 mm
1000 mm
CH
Support Rd
20 mm
23 mm
Conductor
leading
fixed
fixed
Screw
Grooved pin
r M6x16 mm
r M6x16 mm
PU
Part
pc(s)
No.
1 106 812
1 106 813
Distance Holder for HVI® Conductor
106 899
For conductor holders (Part No. 275 220 or 275 225) at distance rods (Ø16 mm)
for cutting to length, made of GFP (Part No. 106 125) for sealing unit ranges
CH / Adapter
material
plastic
Length
30 mm
Thread
M8
Screw
Grooved pin
straight grooved pin 5 mm mm
PU
Part
pc(s)
No.
25 106 899
102 010
Concrete Bases
Wedged, stackable, for air-termination rods Ø16 mm,
chamfered or diminished, or DEHNiso distance holder Ø16 mm
Weight
17 kg
Diameter
Ø
337 mm
Material
concrete (B55)
Wedge/Adapter
material
StSt (V2A)
PU
Part
pc(s)
No.
1 102 010
Flat Washer
102 050
Diameter
Ø
370 mm
Diameter
Ø (d2)
360 mm
Material
EVA
Colour
1
PU
Part
pc(s)
No.
1 102 050
Clip
275 520
For fixing HVI® conductor at e.g. premounted C rails
Clamp with cable duct element
CH
material
St/tZn-S
56
CH
Rd
20/23 mm
Screw
type
dj M6x25
Screw
material
St/tZn
PU
Part
pc(s)
No.
1 275 520
www.dehn.de
106 813
AND ACCESSORIES
Single Parts
275 521
C Rail
Separate, for cutting to length
C Rail
material
St/tZn
PU
Part
pc(s)
No.
2 275 521
Length
2000 mm
105 350
Tripod Support for HVI Conductor in Insulating Pipe
Special type for HVI Conductor integrated into insulating pipe (length 3200 mm).
In order to keep the bending radius of the HVI Conductor at the bottom of the tripod support,
2 concrete bases are installed below and one above the limb.
The stackable concrete base (Part No. 102 010) and the flat washer (Part No. 102 050)
have to be ordered separately.
N
www.dehn.de
Support
material
St/tZn
New Products
Quantity of
bases
9
N
Radius
560 mm
Space requirements
of support
1180x1320 mm
PU
Part
pc(s)
No.
1 105 350
57
Conductor Holder for
HVI® Conductor in explosive Zones
AND ACCESSORIES
Note: Observing the installation instructions No. 1501
is absolutely mandatory.
B
A
275 420
275 430
A
C
B
Base part
material
Cleat
material
CH
Rd
Brace
material
Fixing
holes Ø
Screw
Dimension
(l x w x t)
PU
pc(s)
Part
No.
A MODEL
With distance sleeve, distance: 50 mm, for fixing on metal construction parts (façades) in Ex zones 2 and 22
ZDC
StSt (V2A)
20 mm
StSt (V2A)
4x5.1 / 2x7 mm
dm M6x16 mm
10 275 420
B MODEL
With distance rod, distance 200 mm, for fixing with e.g. fixing plate for DEHNiso distance holder (Part No. 106 127, to be
ordered separately) at metal construction parts (façades) in Ex zones 2 and 22
ZDC
StSt (V2A)
20 mm
Al
dm M6x16 mm
20 275 430
C MODEL
Connecting brace for installing HVI conductors with conductor holders with distance sleeve (Part No. 275 420) on a non-conductive structure, e.g. stone, wood
StSt (V2A)
4x5.1 / 2x7 mm
478x30x3 mm
1 275 499
58
C
www.dehn.de
275 499
Conductor Holder for
HVI® Conductor in explosive Zones
AND ACCESSORIES
106 127
Fixing Plate
Base plate for fixing the distance holder or distance rod (Ø16 mm),
e.g. at parts of the construction
Base plate Socket conn.
Fixing
Dimension
Screw
Screw
material
material
hole Ø
(l x w x t)
type
material
StSt (V2A)
ZDC
8x5.1 / 4x7 / 2x11 mm 170x40x3 mm di M8x12 mm StSt (V2A)
PU
Part
pc(s)
No.
20 106 127
106 322
Attachment with Fixing Socket Connector
For fixing distance holders at pipes, e.g. with tensioning strap, Part No. 106 323
Material
StSt (V2A)
Slot width
(l x w)
26x6 mm
Clamping
range Rd
16 mm
Socket conn.
material
ZDC
PU
Part
pc(s)
No.
10 106 322
106 323
For fixing (tensioning) the clip (Part No. 106 321) or the attachment with fixing socket
connector (Part No. 106 322) at different pipes
Head/Strap
material
StSt (V2A)
www.dehn.de
Clamping
range Ø
90 to 300 mm
Strap
Screw
(l x w x t)
type
1100x25x0.3 mm di M8x20 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
10 106 323
59
Air-termination Masts
with HVI® Conductor
AND ACCESSORIES
A
819 720
819 750
Especially for use at e.g. fermenters or gas holders of
biogas plants.
Transport length 6000 mm
The maximum free length of the complete air-termination system must not exceed 8.5 m.
It has to be fixed with 3 variable supports
(Part No. 105 345)
The separable air-termination mast consists of
– air-termination rod Al Ø16/10 mm, length 2500 mm
– insulating pipe GFP/Al Ø50/60 length 2050 mm
(inserted by 200 mm into mast pipe))
– mast pipe St/tZn Ø60, length 6000 mm with locking
screws M10, out of StSt (V2A)
– HVI conductor, installed inside and outside
B
A
B
Length of
HVI Conductor (l1)
Length of
air-termination rod
Length of
insulating pipe (l1)
Length of
mast pipe
Transport
length
PU
pc(s)
Part
No.
A MODEL
With HVI Conductor I for a total height of maximum 12.5 m of the air-termination system
With 1x HVI Conductor I, conductor length 10 m, integrated
10000 mm
2500 mm
2050 mm
6000 mm
6000 mm
1 819 720
N
With two HVI Conductors I for a total height of maximum 16.0 m of the air-termination system
With 2x HVI Conductor I, conductor length 10 m, internal and external installation.
The further required conductor lengths of the HVI Conductors have to be ordered separately (double).
Maximum total length of the HVI Conductors 13.5 m
10000 mm
2500 mm
2050 mm
6000 mm
6000 mm
1 819 750
N
B MODEL
Variable Supports for Air-termination Masts
105 345
3 supports to be installed per air-termination mast
Clip
material
St/tZn
60
Clamping Clamping range of
range
air-termination mast
250 - 350 mm
60 mm
Fixing
holes Ø
Profile
12x25 mm 40x40x4 / 30x30x3
Screw
type
Screw
material
PU
pc(s)
di M10x30 StSt (V2A)
Part
No.
1 105 345
N
New Products
N
www.dehn.de
AND ACCESSORIES
Fig. 3: Design of a CUI conductor
Touch voltages are voltages affecting a human
being between his
standing surface on the
ground (distance approx.
1 m from the down conductor system) when
contacting the down
conductor. The current
foundation
flows via the hand to the earthing
electrode
body and to the feet
(see Fig. 1).
The hazardous area for ϕ = earth surface
potential
persons being outside of
a building is defined to
earth level within a
height of approx. 3 m
and a distance of 3 m
Fig. 1: Schematic diagram –
around the down conTouch voltage Ut
ductor.
According to DIN EN 62305-3 (VDE 0185-305-3)
Subclause E.4.2.4.2, the area to be protected against
touch voltages corresponds to the height of the finger
tips of a person with outreached hand and additionally
to separation distance s (see Fig. 2).
Additionally, the step voltage in the surroundings of
the building/down conductor has also to be taken into
account.
Ut
Fig. 4: Rain test
DIN EN 62305-3 (VDE 0185-305-3) points out that in
special cases, shock voltages outside of the building
and close to the down-conductor systems, can become
highly dangerous, although the lightning protection
system was designed according to the latest state of
standardisation.
Special cases are e.g. entrance areas, sheltering roofs
of buildings with high frequency of visitors, like theatres, cinemas, malls, where bare/non-insulated downconductor systems and lightning protection earthing
electrodes are installed close to them.
For buildings especially exposed (to lightning), and
which are freely accessible to the public, e.g. shelters,
also measures against impermissibly high shock voltages can become necessary.
Effective measures for protection against injuries to
persons due to touch voltages are defined by standardisation as follows:
– The bare down conductor is coated with an insulating material with an impulse withstand voltage of
100 kV at 1.2/50 μs, e.g. at least 3 mm cross-linked
polyethylene;
– Lockings and/or warning signs to reduce the probability of touching the down conductors.
The CUI conductor has an inner conductor out of copper with a diameter of 8 mm and a high-voltageresistant insulation (see Fig. 3).
Requirements on these conductors are
– the surge withstand capability of 100 kV (1.2/50 μs)
and
– the avoiding of a creepage sparkover even in rain.
The surge withstand capability of 100 kV (1.2/50 μs) is
achieved by an insulation out of special cross-linked
polyethylene (XLPE). Without additional measures, high
impulse voltages cause sparkovers at insulating surfaces. This effect is known as a creeping discharge. If
the creeping discharge inception voltage is exceeded, a
surface discharge is initiated, which can cover a distance of several metres to earthed parts without problem. In order to avoid the upcoming of creeping discharges even in rain, the CUI conductor is supplied
with an additional shield to form a dry area. This shield
on the conductor and the drops after the rain test are
shown in Fig. 4.
The development of the CUI conductor was based on
the “rain test” according to DIN IEC 60 Part 1 (VDE
0432 Part 1) Subclause 9.
During this test, a defined volume of water is sprayed
onto the conductor in an angle of approx. 45°. This
test is shown in Figs. 4 and 5. The CUI conductor is
available in two standard lengths of 3.5 m and 5 m
and is installed vertically at the wall with the corresponding conductor holders. The manufacturer has premounted a head piece and the shield. The conductor
can be shortened on site but not be extended.
For connecting to the down conductor, e.g. disconnecting or MV clamps can be used. When connecting the
CUI conductor to the earth-termination system,e.g.
cross units can be used, which have additionally to be
supplied with anticorrosive measures.
2.50 m
s
Fig. 5: Detail picture of Fig. 4
CUI Conductor
Fig. 2: Protected area for one
person
www.dehn.de
61
CUI Conductor
AND ACCESSORIES
830 208
830 218
With the new CUI conductor, touch voltages at down
conductors can be avoided.
The hazardous area of touch and step voltages for living beings is defined on earth level within a height of
approx. 3 m and a distance of 3 m around the down
conductor.
The CUI conductor has an inner conductor out of copper
and a high-voltage-resistant insulation.
Requirements on these conductors are
– surge withstand capability of 100 kV (1.2/50 μs) and
– the avoiding of a creepong sparkover even in rain.
Conductor
material
Cu
Cu
Insulation
material
Outer Ø
of conductor
Colour of
conductor
Core
cross section
Total
length (l1)
PU
PU
20 mm
20 mm
1
1
50 mm2
50 mm2
3500 mm
5000 mm
PU
pc(s)
Part
No.
1 830 208
1 830 218
For further information about the DEHNcondctor system please see also installation instructions No. 1482.
62
www.dehn.de
275 220
275 229
275 129
Conductor Holder
for CUI Conductor
AND ACCESSORIES
A For installing the CUI conductor at walls or façades.
A
B
C
B
CH
material
CH
Rd
CH height
Fixing
hole
Thread
PU
pc(s)
Part
No.
20 mm
19 mm
6.5 mm
M8
20 mm
10 mm
6.5x16 mm
50 275 229
6.5 x 8 mm
10 275 129
A MODEL
Height 19 mm
PA
C
25 275 220
B MODEL
Height 10 mm
StSt (V2A)
C MODEL
Twin screw cleat for direct wall mounting
StSt (V2A)
20 mm
63
Isolated Air-termination Systems AIR-TERMINATION SYSTEMS
for Omnidirectional Antennas
AND ACCESSORIES
When installing isolated air-termination systems for omnidirectional
antennas, it has to be ensured that
an isolated air-termination rod covers the antenna to be protected
with a sufficient protective angle.
Furthermore, a sufficient separation
distance s has to be kept.
Antennas with 360° emitting characteristics are used
for different radio applications. These antennas are
also known as “omnidirectional antennas” on the
market. Typical applications for omnidirectional antennas in practice are e.g. private mobile radio (PMR) systems, emergency call networks and sometimes also
GSM networks. However, they are only applied in GSM
networks, if there is a low frequency of radio waves.
For omnidirectional antennas it has to be considered
that metal structures situated close to them have a
negative influence on the emitting characteristics,
i.e. they are attenuated by the structures. The more far
away the metal structures are situated from the antenna, the less they interfere with the emitting characteristics.
To evaluate how and how much influence close metal
structures have on the emitting performance, products
of DEHN + SÖHNE have been tested under these criteria together with the company Kathrein in Rosenheim,
Germany.
wave length =
λ=
velocity of light
If the HVI® Conductor of the DEHN
Conductor System is used for isolated air-termination systems, a maximum separation distance of 0.75 m
in air has to be maintained. For maximum wind velocities of 145 km/h,
a mechanical distance of 1 m between the antenna and isolated airtermination system was defined
under consideration of the mechanical deflection of the antenna and
air-termination system when being
stressed by wind loads.
The result of a radio-specific evaluation is a distance
corresponding to a quarter of the wave length.
The following illustrations will show the calculation
of the wave length and a table.
Private mobile radio systems often work in a frequency
range of 40 MHz. The presently existing emergency call
networks (fire brigade, police, etc.) work typically in
frequency ranges of 80 MHz and 160 MHz. The future
digital emergency call networks for authorities, organisations and emergency call networks will work with a
frequency of 400 MHz. Present GSM networks communicate with 900 MHz, 1800 MHz and UMTS networks
with 2 GHz.
The corresponding wave length can be taken from the
above table. As can be read from the table, the quarterwave distance is more critical for applications with a
lower transmission frequency, than e.g. GSM and
UMTS networks.
Frequency (Hz = 1–s )
Wave length (m)
100 000
1 000 000
10 000 000
100 000 000
40 x 106
80 x 106
160 x 106
900 x 106
1800 x 106
3000
300
30
3
7.5
3.75
1.875
0.33
0.17
frequency
⎡m⎤
c ⎢ s ⎥
⎢ ⎥
f ⎢1⎥
⎢⎣ s ⎥⎦
velocity of light c = 300 000 km/s = 3 x 108 m/s
Calculation of the wave length
64
Table
www.dehn.de
AIR-TERMINATION SYSTEMS Isolated Air-termination Systems
AND ACCESSORIES
for Omnidirectional Antennas
Examinations have been performed for application of an air-termination system which is
installed in parallel to the antenna with a
diameter of 50 mm (metal mast) and the
HVI® conductor with a diameter of 20 mm
(copper conductor with a diameter of 5 mm).
The detailed test results can be requested
from DEHN + SÖHNE.
α
L = 1000 mm
omnidirectional
antenna
GFP
Ø50x4 mm
length approx. 1000 mm
L = 1500 mm
e.g.
1000 mm
The lengths of the omnidirectional antennas
can be up to approx. 3000 mm. These
lengths require customised types of the insulating pipe with an air-termination rod up to
2500 mm for covering the corresponding
protective area. Fig. 2 shows a possible
design and the required types.
distance holder,
Part No. 105 363, Ø55-100 mm
Part No. 105 364, Ø100-150 mm
Part No. 105 365, Ø150-190 mm
Fixing the construction with the insulating
pipe at the anntenna mast in a distance
requires special supports. The type of these
distance holders is shown in Fig. 3.
Minimum two distance holders per insulating
pipe of the isolated air-termination system
must be mounted. This can be obtained
according to the diameter of the mast.
The DEHN installation instructions No. 1521
has to be observed for installing the isolated
air-termination system.
Part No. 819 320
L = 3200 mm
Al
Ø50x4 mm
HVI conductor
Fig. 1: Construction for omnidirectional antenna, length 1000 mm
(example)
α
air-termination rod
Al Ø10 mm
L = 1000 mm
air-termination rod
Al Ø16 mm
omnidirectional
antenna
L = 1500 mm
length approx. 1000 mm
GFP
Ø50x4 mm
L = 1500 mm
HVI®
e.g.
distance holder,
Part No. 105 363, Ø55-100 mm
Part No. 105 364, Ø100-150 mm
Part No. 105 365, Ø150-190 mm
1000 mm
approx.
1000 mm
For connecting the
conductor to the airtermination rod, a special connecting element is required. This connecting plate for
the HVI® conductor consists of a terminal
bolt (D = 16 mm) and a KS connector
(6-10 mm).
HVI conductor I
in insulating pipe,
approx.
1000 mm
The technical implementation of the isolated
air-termination system is shown in Fig. 1.
It is based on an omnidirectional antenna
with a length of approx. 1000 mm and an
insulating pipe with a 1000 mm long airtermination tip. Part Nos. 819 320, 819 321
or 819 322 can be used for the design
shown according to the used HVI®
conductor I, II or III (e.g. black).
air-termination rod
Al Ø10 mm
HVI conductor I
in insulating pipe,
Part No. 819 360
L = 3200 mm
Al
Ø50x4 mm
HVI conductor
Fig. 2: Construction for omnidirectional antenna, length 3000 mm
(example)
For the entire topic of isolated air-termination systems for omnidirectional antennas and the above shown design, the wind
load and the resulting statics have to be approved by the operator or owner of the installation.
Further information about the own weight and surface exposed
to the wind loads available on request.
Our components and configurations of the structure are dimensioned according to DIN 4131 for wind load zones II with a
wind velocity of 145 km/h.
m
1000 m
Fig. 3: Distance holder in detail
www.dehn.de
65
Distance Holder for
Omnidirectional Antennas
AND ACCESSORIES
105 363
105 364
Distance holder for DEHNiso Combi insulating pipes
with HVI® Conductor installed inside and outside.
Clip material
Clamping range of
Length
T profile (Ød mast) insulating pipe of spacer
St/tZn
St/tZn
St/tZn
55 - 100 mm
100 - 150 mm
150 - 190 mm
50 mm
50 mm
50 mm
Screw
type
1000 mm di M10x192/M8x20 mm
1000 mm di M10x242/M8x20 mm
1000 mm di M10x292/M8x20 mm
Screw
material
Dimension
(b1xh1xt1)
StSt (V2A) 140x120x55 mm
PU
pc(s)
Part
No.
1 105 363
1 105 364
1 105 365
Mechanical calculations for upcoming forces / torques available on request.
For further details about HVI® Conductor
integrated into insulating pipes,
see page 50.
66
www.dehn.de
105 365
AND ACCESSORIES
Components for Buildings
with thatched Roofs
Components for lightning protection for thatched roofs,
e.g. made of reed or straw.
145 241
Wood Pile
Wood pile with rain cover, suitable for clamping cap (Part No. 146 309)
Material
whitewood (impregnated)
Dimension
(l x w x h)
90x90x2400 mm
Standard
based on DIN 48812
PU
Part
pc(s)
No.
1 145 241
146 309
Clamping Cap
Clamping cap for fixing at wood piles (Part No. 145 241)
with air termination tip (length 300 mm, Ø10 mm, StSt (V2A))
Material
StSt (V2A)
www.dehn.de
Support
Rd
7-10 mm
Standard
DIN 48811 A
Screw
type
di M10x110 mm
Screw/Nut
material
StSt (V2A)
PU
Part
pc(s)
No.
1 146 309
67
with thatched Roofs
AND ACCESSORIES
240 000
Support for Roof Conductors
Roof conductor support with conductor holder
Material
whitewood (impregnated)
Dimension
(l x w x h)
134x300x598 mm
Support
Rd
6-10 mm
PU
Part
pc(s)
No.
1 240 000
239 000
239 001
Eaves Support
Eaves support for bracing the conductors, distance between wall and conductors is adjustable
Material
St/tZn
St/tZn
StSt (V2A)
StSt (V2A)
Adjusting
range (l1)
1.00-1.15 m
1.25-1.40 m
1.25-1.55 m
1.45-1.75 m
Support
Rd
7-10 mm
7-10 mm
7-10 mm
7-10 mm
Standard
DIN 48827
DIN 48827
based on DIN 48827
based on DIN 48827
PU
Part
pc(s)
No.
1 239 000
1 239 001
1 239 009
1 239 019
Tensioning Block
241 002
Tensioning block in accordance with DIN 48827 B
Material
MCI/tZn
Support
Rd
8 mm
Standard
DIN 48827 B
Hole
Ø
9 mm
Screw
type
di M8x20 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
20 241 002
241 009
Tensioning Block
Tensioning block with guide bolt and 2 holes
Material
StSt (V2A)
68
Support
Rd
8 mm
Dimension
(l x w x t)
150x40x4 mm
Hole
Ø
9 mm
Screw
type
di M8x20 mm
Screw
material
StSt (V2A)
PU
Part
pc(s)
No.
20 241 009
www.dehn.de
239 009
239 019
New possibilities for isolated
AND ACCESSORIES air-termination systems on thatched roofs
Roofing of thatched roofs like reed or straw includes an extremely high
fire risk due to its high inflammability.
Due to the high risk potential, special measures are required to reduce
the risk effectively in case of a lightning stroke. The effectiveness of
lightning protection systems on thatched roofs can be further increased
considerably by using the HVI® Conductor.
Installing the HVI® Conductor into an insulating pipe allows for a considerably more appealing design of the isolated air-termination and
down conductor system (see Fig. 1). The HVI® Conductor is used with
an additional grey coating (see Fig. 3).
Fig. 1: New design – Lightning protection for thatched roofs
By using the HVI® Conductor, the lightning protection system can be installed directly at the object to be protected. “Distance holders” in the
ramp area or installing of eaves supports is no longer required (see Figs.
2 and 3).
When designing the air-termination system, it has to be ensured that
the entire roof surface is protected by the air-termination system against
direct lightning strokes.
The insulating pipe (GFP/Al) with the integrated HVI® Conductor has to
be positioned to ensure that the top (GFP) sticks out from the roofing
and the bottom made of aluminium is used for mechanical fixing. In the
run of the aluminium pipe, it has to be ensured, that no earthed parts or
electrical equipment are situated closer than 1 m.
If the ridge (heather/sod ridge) is covered with metal wire netting, the
netting has to keep a distance of > 1 m from the insulating pipe.
As an alternative, a non-conductive (plastic) wire netting can also be
used.
A detailed description can be taken from drawing 1.
The performance parameters of the HVI® Conductor and the corresponding installation instructions have to be observed for installation.
Fig. 2: Air-termination system in detail –
HVI® Conductor in insulating pipe
insulating pipe
with integrated
HVI® Conductor I
foil for sealing the mast
heather or sod ridge
transom
HVI® Conductor I
installed under the
roof to the eaves
EBB
lead-through
moulded board
ring earthing
electrode
MEB
Fig. 3: Connection to down conductor
system – Lead-through moulded
board
www.dehn.de
Drawing 1
69
AND ACCESSORIES
70
www.dehn.de
At ridge and hip tiles
On flat roofs
On metal roofs
71
Roof Conductor Holder
ROOF CONDUCTOR HOLDERS
A
adjustable to ridge and hip tiles
For fixing air termination conductors on the ridge,
e.g. for tile roofs
A
RCH
material
B
Clamping
range
C
CH
height (h1)
D
CH
material
CH
Colour
E
CH
Rd
PU
pc(s)
Part
No.
8 mm
8 mm
8 mm
8 mm
25
25
25
25
204 269
204 267
204 249
204 247
8 mm
8 mm
8 mm
8 mm
25
25
25
25
206 239
206 237
206 249
206 247
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
25
25
25
25
25
25
204 109
204 911
204 107
204 129
204 913
204 127
A MODEL
SPANNsnap with fixing by stainless steel tension spring with DEHNsnap conductor holder,
loose conductor leading, adjustable on the side
StSt (V2A)
180-280 mm
16 mm
plastic
1
Cu
180-280 mm
16 mm
plastic
1
StSt (V2A)
180-280 mm
36 mm
plastic
1
Cu
180-280 mm
36 mm
plastic
1
D
B MODEL
SPANNgrip with fixing by stainless steel tension spring with DEHNgrip conductor holder,
loose conductor leading, adjustable on the side
StSt (V2A)
180-280 mm
20 mm
StSt (V2A)
Cu
180-280 mm
20 mm
Cu
StSt (V2A)
180-280 mm
32 mm
StSt (V2A)
Cu
180-280 mm
32 mm
Cu
C MODEL
Continuously adjustable with DEHNsnap conductor holder, loose conductor leading,
adjustable on the side (top centre to the bottom)
StSt (V2A)
180-280 mm
16 mm
plastic
1
StSt (V2A)
180-280 mm
16 mm
plastic
1
Cu
180-280 mm
16 mm
plastic
1
StSt (V2A)
180-280 mm
36 mm
plastic
1
StSt (V2A)
180-280 mm
36 mm
plastic
1
Cu
180-280 mm
36 mm
plastic
1
D MODEL
Continuously adjustable with DEHNgrip conductor holder, loose conductor leading,
adjustable on the side (top centre to the bottom)
StSt (V2A)
180-280 mm
20 mm
StSt (V2A)
StSt (V2A)
180-280 mm
*20 mm
StSt (V2A)
Cu
180-280 mm
*20 mm
Cu
Cu
180-280 mm
*32 mm
Cu
StSt (V2A)
180-280 mm
*32 mm
StSt (V2A)
E
8 mm
8 mm
8 mm
8 mm
8 mm
25
25
25
25
25
206 109
206 809
206 807
206 817
206 819
6-10 mm
6-10 mm
6-10 mm
6-10 mm
6-10 mm
25
25
25
25
25
202 020
202 021
202 900
202 027
202 227
E MODEL
Stepwise adjustable with DEHNQUICK conductor holder, fixed conductor leading
St/tZn
120-240 mm
St/tZn
St/tZn
200-280 mm
St/tZn
StSt (V2A)
120-240 mm
StSt (V2A)
Cu
120-240 mm
Cu
Cu
200-280 mm
Cu
* short holding claws (l1 = 15 mm), standard length of holding claws: 23 mm
72
www.dehn.de
204 269
204 267
204 249
204 247
206 239
206 237
206 249
206 247
204 109
204 911
204 107
204 129
204 913
204 127
206 109
206 809
206 807
206 817
206 819
202 020
202 021
202 900
202 027
202 227
204
204
216
204 029
204 039
216 000
216 007
201 160
A
for ridge and hip tiles
For fixing air termination conductors on the ridge
B
B
A
RCH
material
Hole
Ø
CH
height
CH
material
CH
colour
CH
Rd
CH
Fl
C
PU
pc(s)
Part
No.
A MODEL
C
FIRSTsnap, for placing on the ridge clamp of dry ridges, with DEHNsnap conductor holder, loose conductor leading
StSt (V2A)
16 mm
plastic
8 mm
50 204 029
1
StSt (V2A)
16 mm
plastic
8 mm
50 204 039
1
B MODEL
For tile, slated and corrugated roof sheetings, with weather-resistant clamp bush, with twin-screw cleat,
fixed conductor leading
plastic
12 mm
St/tZn
7-10 mm
20 mm
plastic
12 mm
Cu
7-10 mm
20 mm
25 216 000
25 216 007
C MODEL
For tile roofs, with threaded wood screw, with twin-screw cleat, fixed conductor leading
St/tZn
10 mm
St/tZn
7-8 mm
www.dehn.de
20 mm
25 201 160
73
A
with embossed brace for roof surfaces
For fixing air termination conductors and down
conductor systems
A
B
C
D
E
B
RCH
material
Brace
length (l1)
CH
height (h1)
CH
material
CH
Colour
CH
Rd
PU
pc(s)
Part
No.
A MODEL
UNIsnap with preformed bending points for angling and hanging into the roof battens, with DEHNsnap conductor holder,
loose conductor leading
StSt (V2A)
205 mm
16 mm
plastic
8 mm
50 204 149
1
StSt (V2A)
205 mm
16 mm
plastic
8 mm
50 204 921
1
Cu
205 mm
16 mm
plastic
8 mm
50 204 147
1
StSt (V2A)
335 mm
16 mm
plastic
8 mm
50 204 159
1
StSt (V2A)
335 mm
16 mm
plastic
8 mm
50 204 922
1
Cu
335 mm
16 mm
plastic
8 mm
50 204 157
1
StSt (V2A)
475 mm
16 mm
plastic
8 mm
50 204 169
1
StSt (V2A)
475 mm
16 mm
plastic
8 mm
50 204 923
1
Cu
475 mm
16 mm
plastic
8 mm
50 204 167
1
StSt (V2A)
205 mm
36 mm
plastic
8 mm
50 204 179
1
StSt (V2A)
205 mm
36 mm
plastic
8 mm
50 204 924
1
Cu
205 mm
36 mm
plastic
8 mm
50 204 177
1
StSt (V2A)
335 mm
36 mm
plastic
8 mm
50 204 189
1
StSt (V2A)
335 mm
36 mm
plastic
8 mm
50 204 925
1
Cu
335 mm
36 mm
plastic
8 mm
50 204 187
1
StSt (V2A)
475 mm
36 mm
plastic
8 mm
50 204 199
1
StSt (V2A)
475 mm
36 mm
plastic
8 mm
50 204 926
1
Cu
475 mm
36 mm
plastic
8 mm
50 204 197
1
C
D
B MODEL
UNIgrip with preformed bending points for angling and hanging into the roof battens, with DEHNgrip conductor holder,
StSt (V2A)
205 mm
20 mm
StSt (V2A)
8 mm
50 206 209
Cu
205 mm
20 mm
Cu
8 mm
50 206 207
StSt (V2A)
335 mm
20 mm
StSt (V2A)
8 mm
50 206 219
Cu
335 mm
20 mm
Cu
8 mm
50 206 217
StSt (V2A)
475 mm
20 mm
StSt (V2A)
8 mm
50 206 229
Cu
475 mm
20 mm
Cu
8 mm
50 206 227
StSt (V2A)
205 mm
32 mm
StSt (V2A)
8 mm
50 206 309
StSt (V2A)
335 mm
32 mm
StSt (V2A)
8 mm
50 206 319
StSt (V2A)
475 mm
32 mm
StSt (V2A)
8 mm
50 206 329
C MODEL
UNIsnap with preformed bending points for angling and hanging into the roof battens and additional clamping device,
with DEHNsnap conductor holder, loose conductor leading
StSt (V2A)
205 mm
16 mm
plastic
8 mm
50 204 089
1
StSt (V2A)
205 mm
16 mm
plastic
8 mm
50 204 088
1
E
N
N
D MODEL
UNIgrip with aluminium basic brace for slight forming to the slots, with DEHNgrip conductor holder, loose conductor leading
Al
205 mm
20 mm
StSt (V2A)
8 mm
50 206 170
Al
205 mm
32 mm
StSt (V2A)
8 mm
50 206 171
E MODEL
With aluminium basic brace for slight forming to the slots, DEHNsnap conductor holder, loose conductor leading
Al
205 mm
36 mm
plastic
8 mm
50 204 170
1
Al
205 mm
36 mm
plastic
8 mm
50 204 171
1
74
N
New Products
www.dehn.de
204 149
204 921
204 147
204 159
204 922
204 157
204 169
204 923
204 167
204 179
204 924
204 177
204 189
204 925
204 187
204 199
204 926
204 197
206 209
206 207
206 219
206 217
206 229
206 227
206 309
206 319
206 329
204 089
204 088
206 170
206 171
204 170
204 171
206
206
206
206 509
206 507
206 609
206 607
ROOF CONDUCTOR HOLDERS DEHNspann Roof Conductor Holder
with embossed or angled brace for tile slots
For fixing air termination conductors and down
conductors on the roof surface of gable roofs.
Pressing the limbs together, the wire is inserted
and held by the characteristics of the steel used
for the spring.
A
B
A
RCH
material
Brace
length (l1)
CH
height (h1)
CH
Rd
PU
pc(s)
Part
No.
50 mm
50 mm
8 mm
8 mm
50 206 509
50 206 507
50 mm
50 mm
8 mm
8 mm
50 206 609
50 206 607
A MODEL
B
With embossed brace
StSt (V2A)
222 mm
StSt (V2A) / Cu
222 mm
B MODEL
With angled brace
StSt (V2A)
StSt (V2A) / Cu
www.dehn.de
189 mm
289 mm
75
202 040
202 902
202 037
202 003
202 008
with brace for roof surfaces
For inserting in tile, slated and cardboard roofs
A
RCH
material
A
B
Brace
height (h1)
Brace
length (l1 / t1)
CH
material
CH
Rd
PU
pc(s)
6-10 mm
6-10 mm
6-10 mm
6-10 mm
6-10 mm
50
50
50
50
50
Part
No.
A MODEL
Straight unit, with DEHNQUICK conductor holder, fixed conductor leading
St/tZn
55 mm
260 / 2 mm
St/tZn
StSt (V2A)
55 mm
260 / 1 mm
StSt (V2A)
Cu
55 mm
260 / 2 mm
Cu
St/tZn
70 mm
160 / 2 mm
St/tZn
St/tZn
70 mm
420 / 2 mm
St/tZn
202 040
202 902
202 037
202 003
202 008
B
B MODEL
Cranked unit, with DEHNQUICK conductor holder, for Rd 6-10 mm conductors, fixed conductor leading
St/tZn
55 mm
260 / 2 mm
St/tZn
6-10 mm
StSt (V2A)
55 mm
260 / 1 mm
StSt (V2A)
6-10 mm
Cu
55 mm
260 / 2 mm
Cu
6-10 mm
76
50 202 010
50 202 901
50 202 017
www.dehn.de
202 010
202 901
202 017
204
204
206
206
202
202
204 357
204 359
206 357
206 359
202 050
202 057
202 080
202 087
202 904
223 000
with angled brace for roof surfaces
A For hanging into the roofing tile or the roof battens
B
B
A
C
RCH
material
Brace length
(l1 / t1)
CH
height
CH
material
C
CH
colour
CH
Rd
D
PU
pc(s)
Part
No.
A MODEL
With DEHNsnap conductor holder, for 8 mm conductors, loose conductor leading
Cu
169 mm
16 mm
plastic
1
StSt (V2A)
169 mm
16 mm
plastic
1
8 mm
8 mm
50 204 357
50 204 359
8 mm
8 mm
50 206 357
50 206 359
B MODEL
With DEHNgrip conductor holder, loose conductor leading
Cu
169 mm
20 mm
Cu
StSt (V2A)
169 mm
20 mm
StSt (V2A)
C MODEL
D
With DEHNQUICK conductor holder, fixed longitudinal and crosswise conductor leading
St/tZn
115 / 2 mm
St/tZn
Cu
115 / 2 mm
Cu
St/tZn
410 / 2 mm
St/tZn
Cu
410 / 2 mm
Cu
StSt (V2A)
410 / 1 mm
StSt (V2A)
6-10 mm
6-10 mm
6-10 mm
6-10 mm
6-10 mm
25
25
50
50
50
202 050
202 057
202 080
202 087
202 904
7-10 mm
25 223 000
D MODEL
With twin screw cleat as conductor holder, for 7-10 mm conductors, fixed conductor leading
St/tZn
410 mm
St/tZn
www.dehn.de
77
204 069
204 079
206 389
206 399
with clamping device for roof surfaces
A
A
B
C
B
RCH
material
Clamping
range
CH
height
CH
material
CH
colour
CH
Rd
PU
pc(s)
Part
No.
A MODEL
PLATTENsnap for fixing at overlapping constructions, with DEHNsnap conductor holder, loose conductor leading
StSt (V2A)
4-6 mm
16 mm
plastic
8 mm
50 204 069
1
StSt (V2A)
4-6 mm
16 mm
plastic
8 mm
50 204 079
1
C
B MODEL
For bitumen shingles, roof and wall plates, with DEHNgrip conductor holder, loose conductor leading
StSt (V2A)
2-8 mm
20 mm
StSt (V2A)
8 mm
StSt (V2A)
8-18 mm
20 mm
StSt (V2A)
8 mm
50 206 389
50 206 399
N
N
C MODEL
ZIEGELsnap for fixing between flat tiles (pantiles) and plates, with DEHNsnap conductor holder, loose conductor leading
StSt (V2A)
4-16 mm
16 mm
plastic
8 mm
50 204 049
1
StSt (V2A)
4-16 mm
16 mm
plastic
8 mm
50 204 059
1
78
N
New Products
www.dehn.de
204 049
204 059
204
204
206
206
204
204 229
204 239
206 349
206 369
204 935
204 936
204 937
204 938
with preformed brace for tile slots
A For hanging or forming to the slots
B
A
B
RCH
material
Brace
length
CH
height (h1)
CH
material
C
CH
colour
CH
Rd
D
PU
pc(s)
Part
No.
A MODEL
C
For hanging at the bottom slot of pantiled roofs, with DEHNsnap conductor holder, loose conductor leading
StSt (V2A)
90 mm
36 mm
plastic
8 mm
1
StSt (V2A)
90 mm
36 mm
plastic
8 mm
1
50 204 229
50 204 239
B MODEL
For hanging at the bottom slot of pantiled roofs, with DEHNgrip conductor holder, loose conductor leading
StSt (V2A)
109 mm
20 mm
StSt
8 mm
50 206 349
C MODEL
For hanging in slot tiles of pantiled roofs, with DEHNgrip conductor holder, loose conductor leading
StSt (V2A)
87 mm
20 mm
StSt (V2A)
8 mm
50 206 369
D MODEL
D
www.dehn.de
FLEXIsnap for hanging in slot tiles with flexible basic brace, loose conductor leading
StSt (V2A)
170 mm
16 mm
plastic
1
StSt (V2A)
170 mm
16 mm
plastic
1
StSt (V2A)
170 mm
36 mm
plastic
1
StSt (V2A)
170 mm
36 mm
plastic
1
8 mm
8 mm
8 mm
8 mm
50
50
50
50
204 935
204 936
204 937
204 938
79
253 015
253 050
253 060
253 030
253 051
for flat roofs
For fixing solid round and tape conductors on flat roofs
Two-part unit, consisting of
A
253
– conductor holder with base plate made of weatherresistant plastic material
– snapped-on rock made of freeze-proof concrete in
accordance with DIN 18501 for paving stones
– freeze resistance tested in accordance with alternating freeze-thaw test according to DIN 52105, Part 2
– stone and base part separately recyclable
253
A
B
C
D
B
Conductor
CH
leading
material
CH
colour
CH
Rd
Stone
Weight
Dimension
(l x w x h)
PU
pc(s)
Part
No.
A MODEL
With single conductor holder Type FB, in accordance with DIN 48829
loose
plastic
8 mm
concrete (B45)
1
253
1 kg
100x100x70 mm
10 253 015
141x86x70 mm
141x86x70 mm
10 253 050
10 253 060
B MODEL
With double conductor holder Type FB2, in accordance with DIN 48829, open form, square
loose
plastic
8 mm
concrete (B45)
1 kg
1
fixed
plastic
8 mm
concrete (B45)
1 kg
1
C
N
N
C MODEL
With single conductor holder Type KF, for clamping in roof sheetings (thickness up to 2.5 mm), which is welded or glued with
the roof sheeting
loose
plastic
8 mm
110x105x75 mm 100 253 030
1
D MODEL
With double conductor holder Type KF2, for clamping in roof sheetings (up to 5 mm thick), which is welded or glued with the
roof sheeting
loose
plastic
8 mm
141x86x70 mm
100 253 051
1
For further details about the application of roof conductor holder Type KF and KF2 (Part Nos. 253 030 and 253 051) please see
installation instructions No. 1251. Plastic base part Type KF, Part No. 253 016, separately available on request.
80
N
New Products
N
D
www.dehn.de
Accessories
Adapter/Holder for FB Type
253 023
For snapping onto roof conductor holders for Rd 10 mm conductors, loose conductor leading
Note: Adapter for Rd 6 mm conductors available on request
CH
Rd
10 mm
Material
plastic
Colour
1
PU
Part
pc(s)
No.
50 253 023
253 021
Adapter/Holder for FB Type
For snapping onto roof conductor holders for flat conductors 30 mm, loose conductor leading
CH
Fl
30 mm
Material
plastic
Colour
1
PU
Part
pc(s)
No.
50 253 021
253 025
Clamp for FB Type
For snapping onto roof conductor holders, for additional fixing of the holder to the installed
air termination conductor at inclined roofs
CH
Rd
8 mm
www.dehn.de
Material
plastic
Colour
1
PU
Part
pc(s)
No.
50 253 025
81
A
for flat roofs with fixing holes
For installation of air termination systems on flat roofs
and walls
A
B
C
D
B
RCH
material
Colour
Dimension
Ø
CH
material
CH
Rd
PU
pc(s)
Part
No.
A MODEL
With DEHNQUICK conductor holder, fixed conductor leading, height up to the centre of the conductor: 60 mm
St/tZn
50x60 mm
St/tZn
6-10 mm
50 202 030
B MODEL
With DEHNQUICK conductor holder, fixed conductor leading, height up to the centre of the conductor: 60 mm
St/tZn
100x100 mm
St/tZn
6-10 mm
50 202 060
C MODEL
Plate with threaded M8 bolt in accordance with DIN 48829 K, e.g. for DEHNsnap or twin screw cleat,
for application at e.g. cardboard roofs, concrete, steel and brickwork
St/tZn
approx. Ø100 mm
25 297 015
D MODEL
Plate with threaded M8 bolt, e.g. for DEHNsnap or twin screw cleat, for application at e.g. cardboard roofs,
concrete, steel and brickwork
plastic
Ø40 mm
1
100 297 025
C
D
82
www.dehn.de
202 030
202 060
297 015
297 025
223
223
223
223
365
223 010
223 040
223 011
223 041
365 059
223 031
223 020
223 021
223 070
A
for metal roofs
For fixing additional air termination systems on
different metal roofs
B
B
A
te
C
C
te
sted
E
D
sted
F
G
te
RCH
Thick- Clamping
material ness (t1) range
D
CH
type
CH
CH
height material
CH Conductor
Rd
leading Screw type
Screw/Nut
material
PU
pc(s)
sted
Part
No.
A MODEL
For roofs with round standing seam, with clamping frame
StSt (V2A) 2.5 mm Ø20 mm clamping frame
StSt (V2A) 6-10 mm fixed
Al
3 mm Ø20 mm clamping frame
Al
6-10 mm fixed
eM8x25 mm StSt (V2A)
50 223 010
50 223 040
loose
loose
50 223 011
50 223 041
For roofs with standing seam, with clamping frame
StSt (V2A) 3 mm 0.7-8 mm clamping frame
50 365 059
50 223 031
B MODEL
For roofs with round standing seam, with DEHNgrip
StSt (V2A) 2.5 mm Ø20 mm DEHNgrip 20 mm StSt (V2A)
Al
3 mm Ø20 mm DEHNgrip 20 mm StSt (V2A)
8 mm
8 mm
C MODEL
E
D MODEL
For roofs with standing seam, with DEHNgrip
StSt (V2A) 2.5 mm 0.7-8 mm DEHNgrip 20 mm StSt (V2A)
8 mm
loose
E MODEL
For trapezium roofs, with clamping frame, for hanging into the fixing screws of the roof or for gluing
StSt (V2A) 2.5 mm
clamping frame
F
50 223 020
F MODEL
For trapezium roofs, with DEHNgrip, for hanging into the fixing screws of the roof or for gluing
StSt (V2A) 2.5 mm
DEHNgrip 20 mm StSt (V2A) 8 mm loose
50 223 021
G MODEL
For snap-in metal roofs (e.g. RIB ROOF Speed 500 by Zambelli)
Al
3 mm 18/22 mm clamping frame
Al
6-10 mm fixed
50 223 070
G
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
83
with adhesive Pad
For installation of air termination systems, e.g. on trapezoidal tin roofs.
The conductor holder can be used for plane (unstructured) surfaces like metal roofs / metal surfaces.
The conductor holders are fixed on the roof by adhering
(remove the protective film)
Note: Installation instructions No. 1473 must be
observed!
The surface to be adhered to has to be cleaned with a
special cleaning liquid (Part No. 297 199) according to
the installation instructions.
1 litre of special cleaning liquid covers a cleaning of
approx. 500 to 1000 bonding surfaces.
The processing temperature of the roof conductor holders ≥ 15° C has to be observed.
Robust, weather- and UV-resistant type.
B
A
RCH
material
RCH
colour
CH
material
CH
Rd
CH
height
CH
colour
Conductor
leading
Dimension
PU
pc(s)
8 mm
8 mm
36 mm
36 mm
1
1
loose
loose
Ø67 mm
Ø67 mm
50 297 110
50 297 117
8 mm
8 mm
32 mm
32 mm
loose
loose
Ø67 mm
Ø67 mm
50 297 120
50 297 127
297 110
297 117
297 120
A
Part
No.
A MODEL
With DEHNsnap conductor holder
plastic
plastic
1
plastic
plastic
1
B
B MODEL
With DEHNgrip conductor holder
plastic
StSt (V2A)
1
plastic
1 Cu / StSt (V2A)
297 199
Special Cleaning Liquid for Roof Conductor Holders
with self-adhesive Pad
Cleanness
99.1 - 99.9%
84
PU
ltrs.
Part
No.
1 297 199
www.dehn.de
297 127
202
206
202
202
202 005
206 105
202 015
202 906
206 339
204 906
204 916
A
for corrugated roof sheetings
For installation of ridge conductors and conductors on
the roof surface
Sheet distance 177 mm (profile 5) and 130 mm
(profile 8)
B
B
A
C
RCH
material
CH
type
CH
height
C
CH
material
D
CH
colour
F
E
CH
Rd
Conductor
leading
PU
pc(s)
Part
No.
6-10 mm
fixed
50 202 005
8 mm
loose
50 206 105
A MODEL
For corrugated roof sheetings, profile 5, for installation in roof surfaces
St/tZn
DEHNQUICK
St/tZn
B MODEL
For corrugated roof sheetings, profile 5, for installation in roof surfaces
St/tZn
DEHNgrip
20 mm
StSt (V2A)
C MODEL
For corrugated roof sheetings, profile 5 and profile 8, for installation of the ridge conductors and conductors in roof surfaces,
angled unit
St/tZn
DEHNQUICK
St/tZn
6-10 mm
fixed
50 202 015
D MODEL
D
For corrugated roof sheetings, profile 5 and profile 8, for installation of ridge conductors and conductors in roof surfaces,
angled unit
StSt (V2A) DEHNQUICK
StSt (V2A)
6-10 mm
fixed
50 202 906
E MODEL
for corrugated roof sheetings, profile 5 and 8, for installation of ridge conductors and conductors in the roof surface,
straight unit
StSt (V2A) DEHNgrip
20 mm
StSt (V2A)
8 mm
loose
50 206 339
F MODEL
for corrugated roof sheetings, profile 5 and 8, for installation of ridge conductors and conductors in the roof surface,
straight unit
StSt (V2A) DEHNsnap
16 mm
plastic
8 mm
loose
50 204 906
1
StSt (V2A) DEHNsnap
16 mm
plastic
8 mm
loose
50 204 916
1
E
F
www.dehn.de
85
86
www.dehn.de
Conductor Holder
DEHNsnap® plastic conductor holder
With twin screw cleat
and flange
DEHNgrip®
87
DEHNsnap® Conductor Holder
CONDUCTOR HOLDERS
Plastic support system with loose conductor leading
204 001
204 007
204 002
204 017
204 003
204 027
A
Easy installation:
Insert the conductor on one side
Press in the cap (locks automatically)
Benefits:
The conductor is supported in a massive chase in the
base body, thus no load on the fastening device
Double cap locking (to be opened with tools)
Conductor is led loosely in longitudinal direction
Robust and weather-resistant unit
UV-stabilised
A
CH
thread
B
C
B
D
CH
material
CH
colour
CH
Rd
plastic
plastic
plastic
plastic
1
1
1
1
8 mm
8 mm
8 mm
8 mm
100
50
50
100
204 001
204 007
204 002
204 017
plastic
plastic
plastic
plastic
1
1
1
1
8 mm
8 mm
8 mm
8 mm
100
100
50
50
204 003
204 027
204 004
204 037
Screw
Plastic
dowel
PU
pc(s)
Part
No.
A MODEL
Height 16 mm
M6
M6
M8
M8
C
B MODEL
Height 36 mm
M6
M6
M8
M8
C MODEL
Height 16 mm with screw, for Rd 8 mm conductors
M8
plastic
1
M8
plastic
1
8 mm
8 mm
a k 5x50 mm
a k 5x50 mm
50 204 006
50 204 057
D MODEL
Height 16 mm, premounted with screw, dowel and cover plate
M8
plastic
8 mm
1
88
D
a k 5x50 mm
Ø8x50 mm
50 204 120
www.dehn.de
204 004
204 037
204 006
204 057
204 120
207 019
207 009
207 039
DEHNgrip® Conductor Holder
CONDUCTOR HOLDERS
207 029
207 109
A Screwless support system made of stainless steel with
Easy installation:
Press in the conductor from overhand
Benefits:
Conductor is fixed in DEHNgrip
No further screwing required
B
A
C
B
CH
thread
CH
hole
CH
material
CH
Rd
Ø7.8 mm
StSt (V2A)
StSt (V2A)
8 mm
8 mm
50 207 019
50 207 009
Ø7.8 mm
StSt (V2A)
StSt (V2A)
8 mm
8 mm
50 207 039
50 207 029
Screw
Plastic
dowel
PU
pc(s)
Part
No.
A MODEL
Height 20 mm
M6
B MODEL
Height 32 mm
M6
C
C MODEL
Height 20 mm, premounted with screw, dowel and cover plate made of grey plastic material
Ø7.8 mm
StSt (V2A)
8 mm
ak 5x45 mm
www.dehn.de
Ø8x50 mm
50 207 109
89
250 000
250 001
250 007
250 010
250 011
DEHNfix® Conductor Holder
CONDUCTOR HOLDERS
Support system with 2 functions (fixing the holder and
the conductor) with DEHNQUICK conductor holder,
Easy installation:
Prebore
Set in the holder with the inserted conductor
Fix it with a few hammer strokes
Benefits:
Cleat, distance holder and striking dowel form one unit
Premounted, ready for driving in
A
Cleat
material
B
Base part
material
C
CH
colour
CH
Rd
Striking
dowel
6-10 mm
6-10 mm
6-10 mm
75/30 mm
75/30 mm
75/30 mm
PU
pc(s)
Part
No.
A MODEL
Height (h1) 30 mm, depth of borehole (h2) 45 mm, hole Ø8 mm
St/tZn
plastic
1
StSt (V2A)
plastic
1
Cu
plastic
1
50 250 000
50 250 001
50 250 007
B MODEL
Height (h1) 30 mm, depth of borehole (h2) 90 mm, for brickwork with insulation up to max. 50 mm, hole Ø8 mm
St/tZn
plastic
6-10 mm
120/80 mm
50 250 010
1
StSt (V2A)
plastic
6-10 mm
120/80 mm
50 250 011
1
Cu
plastic
6-10 mm
120/80 mm
50 250 017
1
C MODEL
Height (h1) 60 mm, depth of borehole (h2) 60 mm, hole Ø8 mm
St/tZn
plastic
1
StSt (V2A)
plastic
1
Cu
plastic
1
6-10 mm
6-10 mm
6-10 mm
120/80 mm
120/80 mm
120/80 mm
50 250 100
50 250 101
50 250 107
Note: Suitable only for massive stones or concrete.
90
www.dehn.de
250 017
250 100
250 101
250 107
275 110
275 160
275 113
CONDUCTOR HOLDERS
Conductor Holder
with cleat and flange
A Complete unit with flange for installing conductors,
B
A
C
B
CH
Rd
CH
thread
CH
height
Cleat
material
Base part
material
20 mm
St/tZn
ZDC
Screw
Plastic
dowel
PU
pc(s)
Part
No.
A MODEL
With female thread
7-10 mm
M8
50 275 110
B MODEL
With female thread, premounted with screw and dowel
7-10 mm
M8
20 mm
St/tZn
ZDC
ak 5x60 mm Ø8x50 mm
50 275 160
C MODEL
With female thread, e.g. for round conductors with plastic coating
13 mm
M8
20 mm
St/tZn
ZDC
50 275 113
C
www.dehn.de
91
Conductor Holder
CONDUCTOR HOLDERS
A
with cleat
Twin screw cleat with M6 screws, for round and flat
conductors
B
B
A
CH
Rd
CH
Fl
C
CH
thread
CH
height
D
Cleat
material
F
E
Base part
material
Screw
type
Plastic
dowel
PU
pc(s)
Part
No.
A MODEL
With female thread, in accordance with DIN 48828 K
7-10 mm
20 mm
M6
20 mm
St/tZn
7-10 mm
20 mm
M8
20 mm
St/tZn
7-10 mm
20 mm
M8
20 mm
Cu
C
ZDC
ZDC
RCB
100 275 068
100 275 088
100 111 033
B MODEL
With additional wood screw
7-10 mm
20 mm
7-10 mm
20 mm
20 mm
20 mm
St/tZn
Cu
ZDC
RCB
bk 5x60 mm
bk 5x60 mm
50 273 608
50 273 687
D
C MODEL
With female thread and slotted cleat, e.g. for steel wires with plastic coating, in accordance with DIN 48828 K
13 mm
M8
20 mm
St/tZn
ZDC
50 275 130
D MODEL
Premounted with female thread, with screw, plastic cover plate (grey) and dowel, in accordance with DIN 48828 K
7-10 mm
20 mm
M8
20 mm
St/tZn
ZDC
50 mm c M8x10 mm Ø10x50 mm
100 275 188
E MODEL
Premounted with wood screw, optionally with plastic cover plate (grey) and dowel
7-10 mm
30 mm
10 mm
StSt (V2A) StSt (V2A)
ak 5x35 mm
7-10 mm
30 mm
10 mm
StSt (V2A) StSt (V2A)
ak 5x45 mm
Ø8x50 mm
50 286 800
50 286 819
Ø8x50 mm
50 273 010
50 273 110
F MODEL
Premounted with wood screw, St/tZn spacing plate and optionally with dowel
7-10 mm
20 mm
St/tZn
St/tZn
bk 5x45 mm
7-10 mm
20 mm
St/tZn
St/tZn
bk 5x45 mm
E
!
F
92
!
Discontinued Types
www.dehn.de
275 068
275 088
111 033
273 608
273 687
275 130
275 188
286 800
286 819
273 010
273 110
260 708
260 108
260 158
260 109
260 787
260 187
260 157
262 070
262 100
262 109
262 130
263 118
A
CONDUCTOR HOLDERS
Conductor Holder
with cleat and tip
Twin screw cleat with M6 screws, for round and flat
conductors
B
A
C
D
B
CH
Rd
CH
Fl
Cleat
material
Base part
material
Fixing/Screw
type (l1)
PU
pc(s)
Part
No.
St/tZn
St/tZn
St/tZn
StSt (V2A)
Cu
Cu
Cu
square tip 70 mm
square tip 100 mm
square tip 150 mm
square tip 100 mm
square tip 70 mm
square tip 100 mm
square tip 150 mm
50
50
50
50
50
50
50
St/tZn
St/tZn
StSt (V2A)
round pin 70 mm
round pin 100 mm
round pin 100 mm
50 262 070
50 262 100
50 262 109
St/tZn
Round pin 100 mm
50 262 130
St/tZn
tip 100 mm
50 263 118
A MODEL
C
With squared tip, in accordance with DIN 48828 P
7-10 mm
20 mm
St/tZn
7-10 mm
20 mm
St/tZn
7-10 mm
20 mm
St/tZn
7-10 mm
20 mm
StSt (V2A)
7-10 mm
20 mm
Cu
7-10 mm
20 mm
Cu
7-10 mm
20 mm
Cu
260 708
260 108
260 158
260 109
260 787
260 187
260 157
B MODEL
With loose round pin, in accordance with DIN 48828 Q
7-10 mm
20 mm
St/tZn
7-10 mm
20 mm
St/tZn
7-10 mm
20 mm
StSt (V2A)
C MODEL
With loose round pin, in accordance with DIN 48828 Q
13 mm
St/tZn
D MODEL
D
Tip with wooden thread
7-10 mm
20 mm
St/tZn
552 020
Accessories - Sealing Collar
For conductor holders with squared tip, e.g. Part No. 260 708
Diameter
65 mm
www.dehn.de
Material
plastic
Colour
1
PU
Part
pc(s)
No.
50 552 020
93
Conductor Holder
CONDUCTOR HOLDERS
273 740
273 741
273 742
for heat insulation interconnected systems
Twin screw cleat with M6 screws,
A
A
B
Thickness of
Depth of
insulating material borehole
CH
Rd
Base part
material
Cleat
material
CH
height
Screw type
Dowel
PU
pc(s)
Part
No.
20 mm
20 mm
20 mm
bl (TX40) 7x140 mm
bl (TX40) 7x180 mm
bl (TX40) 7x240 mm
50 273 740
50 273 741
50 273 742
20 mm
bl (TX40) 7x140 mm
50 273 743
A MODEL
Conductor holder with flange (ZDC) and plastic dowel Ø10 mm
approx. 60 mm
approx. 130 mm
7-10 mm
ZDC
St/tZn
approx. 110 mm
approx. 170 mm
7-10 mm
ZDC
St/tZn
approx. 130 mm
approx. 230 mm
7-10 mm
ZDC
St/tZn
B
B MODEL
Conductor holder with cover plate (S) and plastic dowel Ø10 mm
approx. 60 mm
approx. 130 mm
7-10 mm
RCB
Cu
Conductor Holder with Claw
For wall mounting with M6 locking screw,
Hole
Ø
CH
material
CH
Rd
CH
height
Screw
type
Screw
material
6.5 mm
StSt (V2A)
6-10 mm
22 mm
dj M6x20 mm
StSt (V2A)
94
273 019
PU
pc(s)
Part
No.
50 273 019
www.dehn.de
273 743
276 006
276 007
276 009
CONDUCTOR HOLDERS
276 000
Cover and Spacing Plates
A For use as an intermediate element for screw-threaded
conductor and rod holders
B
A
C
B
Height
Ø
Material
Colour
37 mm
37 mm
plastic
plastic
1
1
PU
pc(s)
Part
No.
A MODEL
C
Plastic cover plate
5 mm
5 mm
100 276 006
100 276 007
B MODEL
Stainless steel cover plate
5 mm
37 mm
StSt (V2A)
100 276 009
St/tZn
50 276 000
C MODEL
St/tZn spacing plate
10 mm
202 000
202 001
202 169
390 110
31 mm
Cleat for use as Conductor Holder
390 117
390 119
A e.g. for flush mounting
B
A
B
CH
material
CH
Rd
Hole
Ø
PU
pc(s)
Part
No.
A MODEL
DEHNQUICK Single-screw cleat with flexible clamping range and fixed conductor leading
St/tZn
6-10 mm
8.5 mm
StSt (V2A)
6-10 mm
8.5 mm
StSt (V2A)
6-10 mm
6.5 mm
50 202 000
50 202 001
100 202 169
B MODEL
Single-screw cleat for clamping frames with flexible clamping range and fixed conductor leading
St/tZn
6-10 mm
9 mm
Cu
6-10 mm
9 mm
StSt (V2A)
6-10 mm
9 mm
www.dehn.de
100 390 110
100 390 117
100 390 119
95
Conductor Holder
CONDUCTOR HOLDERS
260 118
for flush mounting
With clamping plate for nailing
CH
Rd
6-10 mm
CH
material
Conductor
leading
Fixing
Clamping
plate
St/tZn
fixed/loose
squared tip 70 mm
36x20x3 mm
PU
pc(s)
Part
No.
50 260 118
Staples
538 010
For fixing conductors e.g. at wood masts, etc.
CH
material
St/tZn
CH
Rd
Conductor
leading
PU
pc(s)
Part
No.
up to 10 mm
fixed/loose
500 538 010
Staples
538 030
for flat conductors
For fixing tape conductors, e.g. at wood masts, etc.
CH
material
St/tZn
96
CH
Fl
Conductor
leading
PU
pc(s)
Part
No.
30 mm
fixed/loose
300 538 030
www.dehn.de
200 079
200 077
200 089
200 087
200 069
200 067
200 059
CONDUCTOR HOLDERS
200 057
200 029
200 027
540 930
540 931
Conductor Holder
for downpipes
A For installation of down conductors at downpipes with
All types also suitable for plastic downpipes
B
A
C
D
E
B
Clamping range CH
Ø pipe
Rd
CH
material/strip
Screw
type
Screw Strip dimension PU
material
(l x w x t)
pc(s)
Part
No.
A MODEL
C
Type PPS, with worm drive and bead
80-100 mm
8 mm StSt (V2A)
80-100 mm
8 mm
Cu
100-120 mm
8 mm StSt (V2A)
100-120 mm
8 mm
Cu
screw with worm drive SW7 mm
StSt (V2A)
screw with worm drive SW7 mm StSt (V2A) copper-coated
screw with worm drive SW7 mm
StSt (V2A)
screw with worm drive SW7 mm StSt (V2A) copper-coated
50
50
50
50
200 079
200 077
200 089
200 087
25
25
25
25
200 069
200 067
200 059
200 057
B MODEL
Type PS, screwless, with embossments for tongs
*80-120 mm
8 mm StSt (V2A)
*80-120 mm
8 mm
Cu
100 mm
8 mm StSt (V2A)
100 mm
8 mm
Cu
*steps at distance intervals of 5 mm
C MODEL
D
Type PV, adjustable, with M8 clamping screw
50-120 mm
6-8 mm StSt (V2A)
di (SW10) M8x16 mm
50 -120 mm
6-8 mm Cu/bronze
di (SW10) M8x16 mm
StSt (V2A)
StSt (V2A)
10 200 029
10 200 027
Separate grip holder, for combination with continuous tensioning strap (Part No. 540 931)
6-8 mm StSt (V2A)
di (SW10) M8x16 mm
StSt (V2A)
25 540 930
D MODEL
E MODEL
StSt (V2A)
...x14x0.3 mm
1 540 931
Conductor Holder
425 076
425 089
for roof supports
For fixing round conductors at the roof support,
insulated with clamp bush
Clamping range
Ø pipe
76 mm
89 mm
www.dehn.de
Material
CH
Rd
Conductor
leading
Screw
type
Screw/Nut
material
St/tZn
St/tZn
8-10 mm
8-10 mm
fixed
fixed
di M8x20 mm
di M8x20 mm
StSt (V2A)
StSt (V2A)
PU
pc(s)
Part
No.
50 425 076
20 425 089
97
Tape Conductor Holder
CONDUCTOR HOLDERS
275 630
111 039
275 830
284 030
284 040
286 030
with cleat
A
Twin screw cleat with M6 screws
B
A
Thread
CH
height
C
CH
Fl
Cleat
material
D
Base part
material
Screw type
E
Dimension
(l1)
B
PU
pc(s)
Part
No.
C
A MODEL
With female thread
M6
20 mm
M8
20 mm
M8
20 mm
30x3.5 mm
30x3.5 mm
30x3.5 mm
St/tZn
Cu
St/tZn
ZDC
RCB
ZDC
58 mm
58 mm
58 mm
50 275 630
50 111 039
50 275 830
30x3.5 mm
40x4-5 mm
St/tZn
St/tZn
St/tZn
St/tZn
58 mm
70 mm
100 284 030
100 284 040
30x3.5 mm
30x3.5 mm
40x4-5 mm
St/tZn
StSt (V2A)
St/tZn
St/tZn
StSt (V2A)
St/tZn
58 mm
58 mm
70 mm
50 286 030
50 286 139
50 286 040
B MODEL
With slot (6.5x16 mm)
13 mm
13 mm
C MODEL
With wood screw
13 mm
13 mm
13 mm
ak 5x35 mm
ak 5x35 mm
ak 5x35 mm
D
D MODEL
Premounted with cover plate, wood screw and dowel Ø8x50 mm
13 mm
30x3.5 mm
St/tZn
St/tZn
a k 5x45 mm
58 mm
50 286 230
dm M6x50 mm
58 mm
50 288 030
E MODEL
Premounted with screw and wedge dowel (St/tZn, Ø10x50 mm)
13 mm
30x3.5 mm
St/tZn
St/tZn
E
98
www.dehn.de
286 139
286 040
286 230
288 030
275 030
275 230
CONDUCTOR HOLDERS
Tape Conductor Holder
A Complete unit with flange for installation of solid tape
conductors
B
A
B
CH
Fl
CH
thread
CH
height
Cleat
material
Base part
material
20 mm
St/tZn
StSt-ZDC
Screw
type
Plastic
dowel
PU
pc(s)
Part
No.
A MODEL
With female thread
30x30.5 mm
M8
50 275 030
B MODEL
30x30.5 mm
M8
20 mm
St/tZn
277 230
277 237
ZDC
277 239
ak 5x60 mm Ø8x50 mm
50 275 230
Support for Tape Conductors
with pressure plate
For wall mounting with M8 screw
for tape conductors up to 11 mm
and round conductors 6-10 mm.
CH
material
St/tZn
Cu
StSt (V2A)
www.dehn.de
Wall
distance
Fixing
slot
Slot
width
Screw
type
Screw
material
11 mm
11 mm
11 mm
7x15 mm
7x15 mm
7x15 mm
12 mm
12 mm
12 mm
dj M8x25 mm
dj M8x25 mm
dj M8x25 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
PU
pc(s)
Part
No.
25 277 230
25 277 237
25 277 239
99
Rod Holder
CONDUCTOR HOLDERS
A
with cleat
Twin screw cleat with M6 screws for air termination
and lead-in earthing rods, fixed conductor leading
B
B
A
C
D
C
E
Thread
F
CH
height
Cleat
material
G
Base part
material
CH
Rd
Fixing
screw type (l1)
Plastic
dowel
PU
pc(s)
Part
No.
D
A MODEL
With female thread, in accordance with DIN 48805 F
M6
20 mm
St/tZn
ZDC
M8
20 mm
St/tZn
ZDC
M8
20 mm
Cu
RCB
16 mm
16 mm
16 mm
50 275 616
50 275 816
50 275 817
B MODEL
With wood screw
M8
20 mm
ZDC
16 mm
bk 5x60 mm
Premounted with cover plate, screw and dowel
M8
20 mm
St/tZn
ZDC
16 mm
50 mm c M8x10 mm
16 mm
16 mm
16 mm
16 mm
16 mm
square tip 70 mm
square tip 100 mm
square tip 150 mm
square tip 100 mm
square tip 150 mm
50
50
25
50
25
16 mm
16 mm
round pin 100 mm
round pin 100 mm
50 262 110
50 262 119
St/tZn
50 273 606
C MODEL
Ø10x50 mm
50 275 916
E
D MODEL
With tip, in accordance with DIN 48805 D
St/tZn
St/tZn
St/tZn
Cu
Cu
St/tZn
St/tZn
St/tZn
Cu
Cu
260 706
260 106
260 156
260 167
260 177
E MODEL
With loose round pin, in accordance with DIN 48805 E
St/tZn
St/tZn
StSt (V2A)
StSt (V2A)
F
F MODEL
With slot (6.5x16 m)
10 mm
StSt (V2A)
StSt (V2A)
16 mm
50 275 819
G MODEL
with slot (6.5x16 m), premounted with cover plate, screw and dowel
10 mm
StSt (V2A)
StSt (V2A)
16 mm
100
ak 5x45 mm
Ø8x50 mm
50 275 919
G
www.dehn.de
275 616
275 816
275 817
273 606
275 916
260 706
260 106
260 156
260 167
260 177
262 110
262 119
275 819
275 919
CONDUCTOR HOLDERS
275 116
275 260
Rod Holder
A Complete unit with flange for installation of
air termination and lead-in earthing rods,
B
A
B
CH
Rd
CH
thread
CD
height
Cleat
material
Base part
material
20 mm
St/tZn
ZDC
Screw
type
Plastic
dowel
PU
pc(s)
Part
No.
A MODEL
With female thread
16 mm
M8
50 275 116
B MODEL
16 mm
M8
20 mm
St/tZn
273 730
273 731
273 737
ZDC
ak 5x60 mm
Ø8x50 mm
50 275 260
Rod Holder
A
for heat insulation interconnected systems
Twin screw cleat with M6 screws
B
A
B
Thickness of
Depth of
insulating material borehole
Cleat
material
Base part
material
CH
height
CH
Rd
Screw type
Dowel
PU
pc(s)
Part
No.
20 mm
20 mm
16 mm
16 mm
bl (TX40) 7x140 mm
bl (TX40) 7x180 mm
50 273 730
50 273 731
20 mm
16 mm
bl (TX40) 7x140 mm
50 273 737
A MODEL
Rod holder with flange (ZDC) and plastic dowel Ø10 mm
approx. 60 mm
approx. 130 mm St/tZn
ZDC
approx. 110 mm
approx. 170 mm St/tZn
ZDC
B MODEL
Rod holder with cover plate (P) and plastic dowel Ø10 mm
approx. 60 mm
approx. 130 mm
Cu
RCB
www.dehn.de
101
DEHNfix® Rod Holder
CONDUCTOR HOLDERS
252 000
252 007
Support system with 2 functions (fixing the support
and conductor), fixed conductor leading, height 42,
hole depth 60, hole Ø8 mm
Cleat
material
St/tZn
Cu
StSt (V2A)
Base part
material
CH
colour
CH
Rd
Striking
dowel
plastic
plastic
plastic
1
1
1
16 mm
16 mm
16 mm
100/60 mm
100/60 mm
100/60 mm
PU
pc(s)
Part
No.
50 252 000
50 252 007
50 252 009
Note: Only suitable for massive stones or concrete.
Rod Holder
275 019
with claw
For wall mounting with M6 locking screw,
Hole
Ø
CH
material
CH
height
CH
Rd
Screw type
Screw/Nut
material
6.5 mm
StSt (V2A)
28 mm
13-16 mm
dj M6x25 mm
StSt (V2A)
102
PU
pc(s)
Part
No.
50 275 019
www.dehn.de
252 009
200 600
200 601
Dowel for HR Foam Plates
CONDUCTOR HOLDERS
A For fixing conductor and rod holders in heat insulation
interconnected systems
Drive with hexagon socket screw key, 5 mm, or with
screw driver for recessed screws, size 5 (use enclosed
adapter)
To be mounted with wood screws Ø4.5 mm
This dowel is suitable for fixing conductor holders only
if there is no risk of additional tensile forces affecting
the down conductor.
B
A
B
Material
Thickness of
insulating material
Anchoring depth
Length
Working load of
styrofoam PS20
Working load of
HR foam plates
PU
pc(s)
Part
No.
60 mm
50 mm
35 N
60 N
50 200 600
100 mm
85 mm
60 N
85 N
50 200 601
A MODEL
Short unit
PA
B MODEL
Long unit
PA
For further details, please see also installation instructions No. 1459
www.dehn.de
103
CONDUCTOR HOLDERS
104
www.dehn.de
Clamps / Bimetal Components
MV and connecting terminals
Bimetal isolating clamp
Saddle clamp
Length compensation
with bridging braids
105
MV Terminals
CLAMPS
BIMETAL COMPONENTS
390 050
390 051
390 059
390 057
391 050
391 059
390 550
390 551
390 559
390 557
391 550
391 559
Multipurpose connecting terminal for universal use as a
cross-, T- and parallel clamp, two-part unit
A
B
A
te
Clamp
material
C
te
sted
Clamping
range Rd
D
te
sted
Material
thickness (t1/t2)
sted
E
te
te
sted
Screw
type
Screw/Nut
material
PU
pc(s)
di M10x35 mm
di M10x30 mm
di M10x30 mm
di M10x30 mm
di M10x35 mm
di M10x35 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
50
50
50
50
50
50
sted
B
Part
No.
A MODEL
With hexagon screw and threaded base part
St/tZn
8-10 mm
Al
8-10 mm
StSt (V2A)
8-10 mm
Cu
8 mm
St/tZn
10 mm
StSt (V2A)
10 mm
2.5 mm
3.0 mm
2.5 mm
3.0 mm
2.5 mm
2.5 mm
390 050
390 051
390 059
390 057
391 050
391 059
B MODEL
With hexagon screw, spring washer and threaded base part
St/tZn
8-10 mm
2.5 mm
Al
8-10 mm
3.0 mm
StSt (V2A)
8-10 mm
2.5 mm
Cu
8 mm
3.0 mm
St/tZn
10 mm
2.5 mm
StSt (V2A)
10 mm
2.5 mm
C
di M10x30 mm
di M10x30 mm
di M10x30 mm
di M10x30 mm
di M10x35 mm
di M10x35 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
50
50
50
50
50
50
390 550
390 551
390 559
390 557
391 550
391 559
e M10x35 mm
e M10x35 mm
e M10x35 mm
e M10x35 mm
e M10x35 mm
St/tZn
St/tZn
StSt (V2A)
St/tZn
StSt (V2A)
50
50
50
50
50
390 060
390 061
390 067
391 060
391 069
C MODEL
With truss head screw and protection against twisting
St/tZn
8-10 mm
2.5 mm
Al
8-10 mm
3.0 mm
Cu
8 mm
3.0 mm
St/tZn
10 mm
2.5 mm
StSt (V2A)
10 mm
2.5 mm
D
D MODEL
With hexagon screw, spring washer and threaded base part, especially for air-termination rods
St/tZn
8-10/16 mm
3.0/2.5 mm
di M10x40 mm
StSt (V2A)
StSt (V2A)
8-10/16 mm
3.0/2.5 mm
di M10x40 mm
StSt (V2A)
Cu
8/16 mm
3.0/3.0 mm
di M10x40 mm
StSt (V2A)
50 392 050
50 392 059
50 392 057
E MODEL
With truss head screw and protection against twisting, especially for air-termination rods
St/tZn
8-10/16 mm
3.0/2.5 mm
e M10x40 mm
StSt (V2A)
StSt (V2A)
8-10/16 mm
3.0/2.5 mm
e M10x40 mm
StSt (V2A)
50 392 060
50 392 069
MV Terminals St/tZn, Part No. 390 060 with screw made of StSt (V2A), Part No. 390 060/S, Id. No. 045137 available on request.
te
106
sted
E
(VDE 0185 Part 201): 2000-04
www.dehn.de
390 060
390 061
390 067
391 060
391 069
392 050
392 059
392 057
392 060
392 069
390 250
390 257
CLAMPS
BIMETAL COMPONENTS
390 259
MMV Terminals
Miniature multipurpose connecting terminal for
universal use as a cross, T- and parallel clamp,
with protection against twisting
te
Clamp
material
St/tZn
Cu
StSt (V2A)
Clamping
range Rd
Material
thickness
Screw
type
Screw/Nut
material
6-8 mm
6-8 mm
6-8 mm
2.5 mm
2.5 mm
2.5 mm
e M10x35 mm
e M10x35 mm
e M10x35 mm
St/tZn
StSt (V2A)
StSt (V2A)
sted
PU
pc(s)
Part
No.
50 390 250
50 390 257
50 390 259
MAXI MV Terminals
308 041
308 040
Maxi multipurpose connecting terminal for universal
use as a cross, T- and parallel clamp, three-part unit,
with threaded base part
te
Clamp
material
St/tZn
St/bare
390 150
390 157
Clamping
range Rd
Material
thickness
Screw
type
Screw
material
8-16 / 15-25 mm
8-16 / 15-25 mm
3.0 / 2.0 mm
3.0 / 2.0 mm
d i M12x65 mm
d i M12x65 mm
StSt (V2A)
St/bare
390 159
sted
PU
pc(s)
Part
No.
20 308 041
20 308 040
Variants of Clamping Frames
For use as e.g. sealing unit at constructions,
clamping frame with square hole 11 mm
and truss head screw
te
www.dehn.de
sted
Clamp
material
Clamping
range Rd
Material
thickness
Screw
type
Screw/Nut
material
PU
pc(s)
Part
No.
St/tZn
Cu
StSt (V2A)
6-10 mm
6-10 mm
6-10 mm
2.5 mm
2.5 mm
2.5 mm
e M10x35 mm
e M10x35 mm
e M10x35 mm
St/tZn
StSt (V2A)
StSt (V2A)
100 390 150
100 390 157
100 390 159
107
KS Connector
CLAMPS
BIMETAL COMPONENTS
A
For connection to flat profiles
B
B
A
te
KS
screw
C
te
sted
D
te
sted
Clamp
material
Clamping
range Rd
F
E
te
sted
te
sted
Spring
washer
sted
Nut
material
PU
pc(s)
Part
No.
C
A MODEL
St/tZn
ZDC
Cu
RCB
St/tZn
ZDC
Cu
RCB
7-10 mm
6-10 mm
7-10 mm
6-10 mm
3
3
St/tZn
StSt (V2A)
St/tZn
StSt (V2A)
100
100
100
100
301 000
301 007
301 010
301 017
St/tZn
StSt (V2A)
50 302 000
25 302 007
St/tZn
50 302 010
StSt (V2A)
StSt (V2A)
100 301 009
100 301 019
St/tZn
Cu
25 300 002
25 300 017
St/tZn
StSt (V2A)
100 300 000
100 300 007
B MODEL
Two-part unit, with M10 screw and nut, distance: 22 mm
St/tZn
MCI
7-10 mm
Cu
RCB
6-10 mm
D
C MODEL
Two-part unit, with M10 screw and nut, distance: 30 mm
St/tZn
MCI
7-10 mm
D MODEL
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
6-10 mm
6-10 mm
3
E MODEL
Single-part unit, with M12 screw and nut, also for cross sections of 50-95 mm2
St/tZn
MCI
8-12.5 mm
Cu
RCB
8-12.5 mm
E
F MODEL
Separate M10 clamping screw and nut, e.g. for lead-in earthing rods, sealing units, etc.
St/tZn
7-10 mm
Cu
6-10 mm
F
te
108
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
301 000
301 007
301 010
301 017
302 000
302 007
302 010
301 009
301 019
300 002
300 017
300 000
300 007
310 008
310 087
CLAMPS
BIMETAL COMPONENTS
EST Connector
For connecting conductors in T arrangements
te
Clamp
material
ZDC
RCB
Clamping
range Rd
Screw
type
Screw/Nut
material
8 mm
8 mm
e M10x30 mm
e M10x30 mm
StSt (V2A)
StSt (V2A)
PU
pc(s)
sted
Part
No.
50 310 008
50 310 087
Universal Connector
315 115
For cross, T- and parallel connections
te
Clamp
material
Clamping
range Rd
Screw type
Screw/Nut
material
MCI/tZn
8-10 mm
e M10x35 mm
St/tZn
PU
pc(s)
Part
No.
50 315 115
(VDE 0185 Part 201): 2000-04
www.dehn.de
sted
te
sted
109
Parallel Connector
CLAMPS
BIMETAL COMPONENTS
For connecting two conductors in parallel arrangements
B
A
C
D
305 000
305 007
306 100
306 101
A
E
B
te
Clamp
material
te
sted
Clamping range
Rd/Rd
te
sted
Clamping range
in mm2
sted
te
te
sted
PU
pc(s)
sted
Screw
type
Screw/Nut
material
Part
No.
di M8x30 mm
di M8x30 mm
StSt (V2A)
StSt (V2A)
50 305 000
50 305 007
16-95 mm2
di M8x45 mm
StSt (V2A)
25 306 100
16-150 mm2
di M10x50 mm
StSt (V2A)
25 306 101
7-10 mm
e M10x30 mm
StSt (V2A)
50 306 020
7-10 mm
7-10 mm
di M8x20 mm
di M8x20 mm
StSt (V2A)
StSt (V2A)
50 307 000
50 307 007
A MODEL
For different diameters
St/tZn
4-10 mm
Cu
4-10 mm
B MODEL
Cu
5-12.5 mm
C MODEL
Cu
5-16 mm
C
D MODEL
For equal diameters
St/tZn
E MODEL
For equal diameters
St/tZn
Cu
D
E
te
110
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
306 020
307 000
307 007
385 203
385 202
385 213
385 207
309 008
309 087
CLAMPS
BIMETAL COMPONENTS
Connecting Sleeves / ES Connectors
A For connecting two conductors
B
B
A
C
D
E
C
te
Clamp
material
te
sted
te
sted
te
sted
te
sted
PU
pc(s)
sted
Clamping
range Rd
Screw
type
Screw/Nut
material
Part
No.
8 mm
dj M6x10 mm
StSt (V2A)
50 385 203
7-10 mm
dj M6x12 mm
StSt (V2A)
50 385 202
8 mm
dj M6x8 mm
StSt (V2A)
50 385 213
8 mm
dj M6x8 mm
StSt (V2A)
50 385 207
ES connector with a screw
ZDC
8 mm
RCB
8 mm
e M10x30 mm
e M10x30 mm
StSt (V2A)
StSt (V2A)
50 309 008
50 309 087
A MODEL
D
With 4 screws
ZDC
B MODEL
With 4 screws
ZDC
C MODEL
E
With 4 screws
Al
D MODEL
With 4 screws
Cu
E MODEL
385 216
Connecting Sleeve for Air Termination Rods
With central stud for connecting air termination rods
to greater lengths (transport length).
Using the connecting sleeve, the air termination rod has
to be fixed additionally above the sleeve.
te
Material
Al
Clamping range
Rd / Rd
Screw
Screw
material
Outer
Ø
16 / 16 mm
di M8x12 mm
StSt (V2A)
28 mm
PU
pc(s)
Part
No.
10 385 216
(VDE 0185 Part 201): 2000-04
www.dehn.de
sted
te
sted
111
Cross Units
CLAMPS
BIMETAL COMPONENTS
for aboveground connection
For connecting conductors in cross and T arrangements
B
A
te
Clamp
material
Rd / Rd
A
C
te
sted
314 300
314 307
314 310
te
sted
Clamping range
Rd / Fl
B
sted
Fl / Fl
Screw
type
Screw
material
Dimension
(l x w x t)
PU
pc(s)
Part
No.
30 / 30 mm
30 / 30 mm
dj M6x20 mm
dj M6x20 mm
StSt (V2A)
StSt (V2A)
50x50x2.5 mm
50x50x2.5 mm
50 314 300
50 314 307
30 / 30 mm
dj M6x20 mm
StSt (V2A)
50x50x2.5 mm
50 314 310
dj M6x20 mm
dj M6x20 mm
StSt (V2A)
StSt (V2A)
50x50x2.5 mm
50x50x2.5 mm
25 316 163
25 316 167
A MODEL
Without intermediate plate
St/tZn
8-10 / 8-10 mm 8-10 / 30 mm
Cu
8-10 / 8-10 mm 8-10 / 30 mm
B MODEL
With intermediate plate
St/tZn
8-10 / 8-10 mm
8-10 / 30 mm
C MODEL
With intermediate plate, e.g. for air termination rods
St/tZn
16 / 8-10 mm
16 / 30 mm
Cu
16 / 8-10 mm
16 / 30 mm
te
112
sted
C
(VDE 0185 Part 201): 2000-04
www.dehn.de
316 163
316 167
319 201
319 207
319 209
321 045
321 047
319 229
319 202
319 219
318 201
318 207
318 209
318 251
318 033
318 233
320 044
318 252
CLAMPS
BIMETAL COMPONENTS
Cross Units
for above- and underground connection
For connecting conductors
A in cross and T arrangements
B
B
A
te
sted
Clamp
material
Rd / Rd
te
C
te
sted
Clamping range
Rd / Fl
D
te
sted
Fl / Fl
te
sted
Screw
type
Screw/Nut
material
F
E
te
sted
Dimension
(l x w x t1)
PU
pc(s)
sted
Part
No.
A MODEL
With intermediate plate for Rd and Fl conductors
St/tZn
8-10 / 8-10 mm 8-10 / 30 mm
30 / 30 mm
Cu
8-10 / 8-10 mm 8-10 / 30 mm
30 / 30 mm
StSt (V4A) 8-10 / 8-10 mm 8-10 / 30 mm
30 / 30 mm
C
di M8x25 mm
di M8x25 mm
di M8x25 mm
25 319 201
25 319 207
25 319 209
B MODEL
N
With intermediate plate for Rd and Fl conductors up to 40 mm
St/tZn
8-10 / 30-40 mm 30-40 / 30-40 mm di M8x30 mm StSt (V2A)
Cu
8-10 / 30-40 mm 30-40 / 30-40 mm di M8x30 mm StSt (V2A)
StSt (V4A) 7-10 / 7-10 mm 7-10 / 30-40 mm 30-40 / 30-40 mm di M8x30 mm StSt (V4A)
70x70x4 mm
70x70x3 mm
70x70x3 mm
10 321 045
10 321 047
25 319 229
25 319 202
25 319 219
StSt (V2A)
StSt (V2A)
StSt (V4A)
StSt (V2A)
25
25
25
25
C MODEL
D
With intermediate plate for earth entries or air-termination rods
St/tZn
8-10 / 16 mm
16 / 30 mm
di M8x25 mm
StSt (V4A) 8-10 / 16 mm
16 / 30 mm
di M8x25 mm
D MODEL
Without intermediate plate for Rd and Fl conductors
St/tZn *
8-10 / 30 mm
30 / 30 mm
Cu *
8-10 / 30 mm
30 / 30 mm
StSt (V4A)
8-10 / 30 mm
30 / 30 mm
St/tZn
8-10 / 8-10 mm 8-10 / 30 mm
30 / 30 mm
di M8x25 mm
di M8x25 mm
di M8x25 mm
di M8x25 mm
60x60x3 mm
60x60x4 mm
60x60x3 mm
60x60x3 mm
318 201
318 207
318 209
318 251
*tested with 50 Hz currents
E
E MODEL
Without intermediate plate for Fl and Fl conductors
St/tZn
30 / 30 mm
di M8x25 mm
StSt (V4A)
30 / 30 mm
di M8x25 mm
St/tZn
30-40 / 30-40 mm di M8x30 mm
25 318 033
25 318 233
25 320 044
25 318 252
F MODEL
Without intermediate plate for earth entries or air-termination rods
St/tZn
8-10 / 16 mm
16 / 30 mm
di M8x25 mm
Type available as StSt (V4A) especially for Fl 30 mm and Rd 8-10 mm with intermediate plate (dimension: 60x60 mm)
Part No. 040332, on request
F
(VDE 0185 Part 201): 2000-04
www.dehn.de
New Products
N
te
sted
113
SV Terminals
CLAMPS
BIMETAL COMPONENTS
For cross and T connection,
with protection against twisting of the screws
B
A
308 220
308 229
308 320
308 329
308 330
A
C
B
te
te
sted
Clamp
material
Rd / Rd
te
sted
Clamping range
Rd / Fl
Fl / Fl
7-10 / 30 mm
7-10 / 30 mm
7-10 / 40 mm
7-10 / 40 mm
30 / 30 mm
30 / 30 mm
40 / 40 mm
40 / 40 mm
sted
Screw/Nut
material
Screw type
Dimension
(l1 x t1)
PU
pc(s)
Part
No.
94x4 mm
94x3 mm
108x4 mm
108x3 mm
25
25
25
25
St/tZn
StSt (V4A)
108x4 mm
108x3 mm
25 308 330
25 308 339
St/tZn
StSt (V4A)
94x4 mm
94x3 mm
25 308 230
25 308 239
A MODEL
For flat and round conductors
St/tZn
7-10 / 7-10 mm
StSt (V4A)
7-10 / 7-10 mm
St/tZn
7-10 / 7-10 mm
StSt (V4A)
7-10 / 7-10 mm
e M10x30 mm St/tZn
e M10x30 mm StSt (V4A)
e M10x30 mm St/tZn
e M10x30 mm StSt (V4A)
308 220
308 229
308 320
308 329
C
B MODEL
For flat and round conductors as well as lead-in earthing rods
St/tZn
7-10 / 16 mm
16 / 40 mm
e M10x30 mm
StSt (V4A)
7-10 / 16 mm
16 / 40 mm
e M10x30 mm
C MODEL
For flat conductors
St/tZn
StSt (V4A)
30 / 30 mm
30 / 30 mm
e M10x30 mm
e M10x30 mm
Type StSt (V2A) especially for Fl 30 mm and Rd 7-10 mm, Part No. 308 239/S, Id. No. 045 292 available on request.
SVP Terminals
A
For cross and parallel connection, with slotted top part
(no removing of the screws required)
te
Clamp
material
B
B
A
te
sted
sted
Clamping range Clamping range Clamping range
Rd / Rd
Rd / Fl
Fl / Fl
Screw
type
Screw
material
PU
pc(s)
Part
No.
A MODEL
St/tZn
8-10 / 8-10 mm
8-10 / 30 mm
30 / 30 mm
di M8x25 mm
StSt (V2A)
50 308 060
8-10 / 30 mm
30 / 30 mm
di M8x25 mm
StSt (V2A)
50 308 070
B MODEL
With intermediate plate (slotted)
St/tZn
8-10 / 8-10 mm
114
www.dehn.de
308 060
308 070
308 339
308 230
308 239
371 009
371 007
371 008
370 014
370 018
CLAMPS
BIMETAL COMPONENTS
Terminals
A For connection with steel constructions and steel plates
B
A
te
Clamping
range
C
Clamp
material
B
C
te
sted
D
te
sted
PU
pc(s)
sted
Clamping
range Rd
Screw
type
Screw/Nut
material
Part
No.
7-10 mm
7-10 mm
e M10x50 mm
e M10x50 mm
StSt (V2A)
StSt (V2A)
20 371 009
20 371 007
4-10 mm
e M10x50 mm
StSt (V2A)
50 371 008
Longitudinal and cross connection with KS screw
1-12 mm
MCI/tZn
7-10 mm
dj M6x25 mm
StSt (V2A)
25 370 014
di M8x20 mm
StSt (V2A)
25 370 018
A MODEL
Longitudinal and cross connection
0.4-12 mm
MCI/tZn
0.4-12 mm
RCB
B MODEL
Longitudinal connection
0.4-12 mm
MCI/tZn
C MODEL
D
D MODEL
Longitudinal and cross connection with KS screw
8-18 mm
MCI/tZn
7-10 mm
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
115
Terminals with Pressure Plate
CLAMPS
BIMETAL COMPONENTS
372 018
372 019
372 035
For connection with steel constructions and steel plates
A
B
A
te
Clamping
range
te
sted
sted
Clamp
material
B
Clamping
range Rd
Screw
type
Screw/Nut
material
PU
pc(s)
Part
No.
6-10 mm
6-10 mm
di M10x35 mm
di M10x35 mm
StSt (V2A)
StSt (V2A)
25 372 018
25 372 019
6-10 mm
6-10 mm
di M10x35 mm
di M10x35 mm
StSt (V2A)
StSt (V2A)
25 372 035
25 372 039
A MODEL
5-18 mm
St/tZn
5-18 mm
StSt (V2A)
B MODEL
18-35 mm
St/tZn
18-35 mm
StSt (V2A)
te
116
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
372 039
377 005
377 017
CLAMPS
BIMETAL COMPONENTS
377 100
A
Terminal Brackets
For connecting metal sheaths with blind rivetings
or screws
B
A
te
B
Bracket
material
Material
thickness (t1)
Fixing
hole Ø
Clamping frame
material
Screw
type
te
sted
Screw/Nut
material
PU
pc(s)
sted
Part
No.
A MODEL
Hole Ø11 mm (e.g. for KS connectors), longitudinal and cross connection
Al
3 mm
2x6.5 / 4x5.2 mm
Cu
2 mm
2x6.5 / 4x5.2 mm
50 377 005
50 377 017
B MODEL
With clamping frame for Rd 6-10 mm conductors, longitudinal and cross connection
Al
3 mm
2x6.5 / 4x5.2 mm
St/tZn
e M10x30 mm
365 050
365 051
365 057
365 059
365 220
StSt (V2A)
50 377 100
Saddle Clamps
365 221
365 227
365 229
with enlarged connecting area
Unit with a contact area of 10 cm2
A
B
A
te
B
Clamping range
of flange
Clamp
material
Clamping
range Rd
te
sted
sted
Screw
type
Screw/Nut
material
PU
pc(s)
Part
No.
e M8x25 mm
e M8x25 mm
e M8x25 mm
e M8x25 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
50
50
50
50
365 050
365 051
365 057
365 059
e M10x45 mm
e M10x45 mm
e M10x45 mm
e M10x45 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
50
50
50
50
365 220
365 221
365 227
365 229
A MODEL
Angled unit, longitudinal and cross connection
0.7-8 mm
St/tZn
6-10 mm
0.7-8 mm
Al
6-10 mm
0.7-8 mm
Cu
6-10 mm
0.7-8 mm
StSt (V2A)
6-10 mm
B MODEL
Straight unit, longitudinal and cross connection
0.7-10 mm
St/tZn
8-10 mm
0.7-10 mm
Al
8-10 mm
0.7-10 mm
Cu
8-10 mm
0.7-10 mm
StSt (V2A)
8-10 mm
www.dehn.de
117
Saddle Clamps
CLAMPS
BIMETAL COMPONENTS
A
For connecting conductors with flanges
B
B
A
te
sted
C
te
sted
Clamping range Clamp
Material
Clamping
of flange
material thickness (t1) range Rd
D
te
F
E
te
sted
sted
Screw
type
te
te
sted
Screw/Nut
material
PU
pc(s)
sted
Part
No.
C
A MODEL
With clamping frame, longitudinal and crosswise conductor leading
0.7-8 mm
St/tZn
3 mm
6-10 mm
e M8x35 mm
0.7-8 mm
Al
3 mm
6-10 mm
e M8x35 mm
0.7-8 mm
Cu
3 mm
6-10 mm
e M8x35 mm
0.7-8 mm
StSt (V2A)
2.5 mm
6-10 mm
e M8x35 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
50
50
50
50
365 030
365 031
365 037
365 039
StSt (V2A)
StSt (V2A)
StSt (V2A)
50 365 010
50 365 017
50 365 019
StSt (V2A)
StSt (V2A)
50 251 002
50 251 027
StSt (V2A)
StSt (V2A)
50 365 000
50 365 007
B MODEL
With double cleat, longitudinal and crosswise conductor leading
0.7-8 mm
St/tZn
3 mm
8-10 mm
e M8x40 mm
0.7-8 mm
Cu
3 mm
8-10 mm
e M8x40 mm
0.7-8 mm
StSt (V2A)
2.5 mm
6-10 mm
e M8x40 mm
C MODEL
With twin screw cleat, longitudinal and crosswise conductor leading
0.7-5 mm
St/tZn
2.5 mm
7-10 mm
dj M6x12 mm
0.7-5 mm
Cu
2.5 mm
7-10 mm
dj M6x12 mm
D
D MODEL
With twin screw cleat, longitudinal and crosswise conductor leading
0.7-6 mm
ZDC
7-10 mm
dm M6x16 mm
0.7-6 mm
RCB
7-10 mm
dm M6x16 mm
E MODEL
With clamping frame, longitudinal and crosswise conductor leading, for hooking at flanges situated close to roof or wall areas
0.7-10 mm
St/tZn
3 mm
6-10 mm
dm M6x16 / di M8x20 mm
StSt (V2A)
50 365 020
0.7-10 mm
Cu
3 mm
6-10 mm
dm M6x16 / di M8x20 mm
StSt (V2A)
50 365 027
E
F MODEL
With twin screw cleat, longitudinal and crosswise conductor leading, for hooking at flanges situated close to roof or wall areas
0.7-10 mm
St/tZn
3 mm
7-10 mm
dm M6x16 mm
StSt (V2A)
50 365 040
0.7-10 mm
Cu
3 mm
7-10 mm
dm M6x16 mm
StSt (V2A)
50 365 047
F
te
118
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
365 030
365 031
365 037
365 039
365 010
365 017
365 019
251 002
251 027
365 000
365 007
365 020
365 027
365 040
365 047
339 060
339 067
339 069
339 050
339 057
339 059
338 000
338 001
338 007
338 009
339 010
CLAMPS
BIMETAL COMPONENTS
A
For connecting conductors with gutters
B
B
A
te
Clamping range Clamp
of bead Ø
material
C
Gutter Clamps
te
sted
Clamping
range Rd
Cleat
material
Width
C
te
sted
D
sted
Screw
type
Screw
material
PU
pc(s)
Part
No.
di M8x25 mm
di M8x25 mm
di M8x25 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
25 339 060
25 339 067
25 339 069
di M8x25 mm
di M8x25 mm
di M8x25 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
25 339 050
25 339 057
25 339 059
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
25
25
25
25
StSt (V2A)
25 339 010
A MODEL
With clamping frame, longitudinal and crosswise conductor leading
16-22 mm
St/tZn
6-10 mm
St/tZn
40 mm
16-22 mm
Cu
6-10 mm
Cu
40 mm
16-22 mm
StSt (V2A)
6-10 mm
StSt (V2A) 40 mm
B MODEL
With double cleat, longitudinal and crosswise conductor leading
16-22 mm
St/tZn
8-10 mm
St/tZn
40 mm
16-22 mm
Cu
8-10 mm
Cu
40 mm
16-22 mm
StSt (V2A)
8-10 mm
StSt (V2A) 40 mm
C MODEL
D
With twin screw cleat, longitudinal conductor leading
13-25 mm
St/tZn
7-10 mm
St/tZn
13-25 mm
Al
7-10 mm
Al
13-25 mm
Cu
7-10 mm
Cu
13-25 mm
StSt (V2A)
7-10 mm
StSt (V2A)
40 mm dm M6x16 / M6x10 mm
40 mm
dm M6x16 mm
40 mm dm M6x16 / M6x10 mm
40 mm
dm M6x16 mm
338 000
338 001
338 007
338 009
D MODEL
With twin screw cleat, longitudinal conductor leading, width: 60 mm
13-25 mm
St/tZn
7-10 mm
St/tZn
60 mm
dj M6x20 mm
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
119
Clamp for Eaves Gutters
for Single Screws
339 100
339 101
339 107
339 109
339 110
CLAMPS
BIMETAL COMPONENTS
For connecting conductors with gutters
A
B
A
te
te
sted
Clamping range
of bead Ø
Clamp
material
sted
Clamping
range Rd
Width
Screw type
Screw
material
PU
pc(s)
Part
No.
8-10 mm
8-10 mm
8-10 mm
8-10 mm
40 mm
40 mm
40 mm
40 mm
di M8x60 mm
di M8x60 mm
di M8x60 mm
di M8x60 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
25
25
25
25
339 100
339 101
339 107
339 109
8-10 mm
8-10 mm
8-10 mm
8-10 mm
40 mm
40 mm
40 mm
40 mm
di M8x60 mm
di M8x60 mm
di M8x60 mm
di M8x60 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
25
25
25
25
339 110
339 111
339 117
339 119
A MODEL
With clamping frame
16-22 mm
St/tZn
16-22 mm
Al
16-22 mm
Cu
16-22 mm
StSt (V2A)
B
B MODEL
With double cleat
16-22 mm
16-22 mm
16-22 mm
16-22 mm
St/tZn
Al
Cu
StSt (V2A)
Gutter Board Clamps
343 000
343 007
For connecting conductors with gutter boards,
longitudinal connection with twin screw cleat
te
sted
Clamping
range
3-13 mm
3-13 mm
te
120
sted
Clamp
material
Width
Clamping
range Rd
Screw
type
Screw
material
St/tZn
Cu
90 mm
90 mm
7-10 mm
7-10 mm
dj M6x20 mm
dj M6x20 mm
StSt (V2A)
StSt (V2A)
PU
pc(s)
Part
No.
25 343 000
25 343 007
(VDE 0185 Part 201): 2000-04
www.dehn.de
339 111
339 117
339 119
345 008
345 010
345 087
347 201
CLAMPS
BIMETAL COMPONENTS
Clamp-type Sockets
For connecting conductors to construction parts
A
B
A
te
B
Clamping
range Rd
Material
Fixing
hole Ø
St/tZn
St/tZn
Cu
11 mm
11 mm
11 mm
GCI/tZn
12 mm
Screw
material
Screw type
PU
pc(s)
sted
Part
No.
A MODEL
With borehole
8 mm
10 mm
8 mm
100 345 008
100 345 010
100 345 087
B MODEL
With screws
7-10 mm
380 020
380 027
dj M6x12 mm
380 029
StSt (V2A)
100 347 201
Rod Clamps
For connecting air termination rods with conductors.
For longitudinal connection, suitable for all conductor
materials.
For cross connection (cross arrangement), only suitable
for St/tZn and stainless steel.
te
Clamp
material
St/tZn
Cu
StSt (V2A)
Clamping range
Rd / Rd
Screw
type
Screw
material
8-10 / 16 mm
8-10 / 16 mm
8-10 / 16 mm
di M10x25 mm
di M10x25 mm
di M10x25 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
PU
pc(s)
Part
No.
50 380 020
50 380 027
50 380 029
(VDE 0185 Part 201): 2000-04
www.dehn.de
sted
te
sted
121
MV Terminal for
392 050
392 059
392 057
CLAMPS
BIMETAL COMPONENTS
Multi-purpose terminal for universal use as a cross-,
T- and parallel clamp,
two-part unit
A
B
A
te
Clamp
material
te
sted
Clamping
range Rd
sted
Material
thickness (t1/t2)
Screw type
Screw/Nut
material
PU
pc(s)
Part
No.
di M10x40 mm
di M10x40 mm
di M10x40 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
50 392 050
50 392 059
50 392 057
e M10x40 mm
e M10x40 mm
StSt (V2A)
StSt (V2A)
50 392 060
50 392 069
B
A MODEL
With hexagon screw, spring washer and threaded base part
St/tZn
8-10/16 mm
3.0/2.5 mm
StSt (V2A)
8-10/16 mm
3.0/2.5 mm
Cu
8/16 mm
3.0/3.0 mm
B MODEL
With truss head screw and protection against twisting
St/tZn
8-10/16 mm
3.0/2.5 mm
StSt (V2A)
8-10/16 mm
3.0/2.5 mm
Bimetal MV Terminals
390 657
For connecting conductors made of different materials,
with intermediate plate (Cupal) and threaded base part
Clamp
material
Cu / Al
te
122
sted
Clamping range
Rd Cu
Clamping range
Rd Al
Screw
type
Screw/Nut
material
8 mm
8-10 mm
di M10x30 mm
StSt (V2A)
PU
pc(s)
Part
No.
50 390 657
(VDE 0185 Part 201): 2000-04
www.dehn.de
392 060
392 069
390 267
CLAMPS
BIMETAL COMPONENTS
Bimetal MMV Terminals
For connecting conductors made of different materials,
with intermediate plate (Cupal)
te
Clamp
material
Cu / St/tZn
Clamping range
Rd Cu
Clamping range
Rd St/tZn
Screw
type
Screw/Nut
material
6-8 mm
6-8 mm
e M10x35 mm
StSt (V2A)
365 117
365 127
PU
pc(s)
sted
Part
No.
50 390 267
Bimetal Saddle Clamps
For connecting conductors with flanges made of
different materials
A
B
A
te
B
Clamp
material
Clamping
range Rd
Clamping range
of flange
sted
Screw
type
Screw/Nut
material
PU
pc(s)
Part
No.
e M8x35 mm
StSt (V2A)
50 365 117
e M8x35 mm
StSt (V2A)
50 365 127
A MODEL
For Cu flanges with intermediate plate (Cupal)
St/tZn / Cu
6-10 mm
0.7-8 mm
B MODEL
For St/tZn flanges with intermediate plate (Cupal)
Cu / St/tZn
6-10 mm
0.7-8 mm
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
123
Bimetal Gutter Clamps
339 167
339 157
CLAMPS
BIMETAL COMPONENTS
For connecting conductors with gutters made of different materials
339 150
A
B
B
A
te
te
sted
Clamp
material
C
sted
Clamping range
of bead Ø
Clamping
range Rd
Screw
type
Screw/Nut
material
PU
pc(s)
Part
No.
C
A MODEL
For Cu gutters with clamping frame (St/tZn) and intermediate plate (Cupal)
Cu / St/tZn
16-22 mm
6-10 mm
di M8x20 mm
StSt (V2A)
25 339 167
StSt (V2A)
25 339 157
StSt (V2A)
25 339 150
B MODEL
For Cu gutters with double cleat (St/tZn) and intermediate plate (Cupal)
Cu / St/tZn
16-22 mm
8-10 mm
di M8x25 mm
C MODEL
For St/tZn gutters with double cleat (Cu) and intermediate plate (Cupal)
St/tZn / Cu
16-22 mm
8-10 mm
di M8x25 mm
A
460 507
460 517
UNI Bimetal Isolating Clamps
For joining conductors made of different materials
B
B
A
te
Material
C
te
sted
Clamping range
Rd/Rd
sted
Clamping range
Rd/Fl
te
sted
Screw
type
Screw
material
PU
pc(s)
Part
No.
C
A MODEL
For Cu conductors and St/tZn or StSt (V4A) lead-in earthing rods
Cu / St/tZn
8-10 / 16 mm
di M8x20 mm
StSt (V2A)
50 460 507
di M8x20 mm
StSt (V2A)
50 460 517
For Cu conductors and solid tape conductors St/tZn or StSt (V4A)
Cu / St/tZn
8-10 / 30 mm
di M8x20 mm
StSt (V2A)
50 460 557
B MODEL
For Cu and St/tZn conductors or StSt (V4A)
Cu / St/tZn
8-10 / 8-10 mm
C MODEL
124
www.dehn.de
460 557
460 117
460 147
CLAMPS
Bimetal Isolating Clamps with Shield
BIMETAL COMPONENTS
A For joining conductors made of different materials
B
A
B
te
Material
Clamping range
Rd / Rd
Clamping range
Rd / Fl
te
sted
PU
pc(s)
sted
Screw
type
Screw
material
Shield
Part
No.
di M8x16 mm
StSt (V2A)
S (1)
10 460 117
di M8x16 mm
StSt (V2A)
S (1)
10 460 147
A MODEL
With Cu KS connector and St/tZn cleat
Cu / St/tZn
6-10 / 16 mm
B MODEL
With Cu KS connector and St/tZn cleat
Cu / St/tZn
6-10 / 30 mm
420 207
Bimetal Downpipe Clamps
For connecting steel conductors with copper downpipes,
with St/tZn clamping frame and intermediate plate
(Cupal)
Material
Cu / St/tZn
Clamping range
of pipe Ø
Clamping
range Rd
100 mm
6-10 mm
Screw
type
Screw/Nut
di M8x25 / e M10x30 mm StSt (V2A)
PU
pc(s)
50 420 207
(VDE 0185 Part 201): 2000-04
www.dehn.de
Part
No.
te
sted
125
Cupal Sleeves
562 250
562 035
562 050
562 135
CLAMPS
BIMETAL COMPONENTS
For corrosion-resistant connection of steel or aluminium
and copper
B
A
Exterior
material
Interior
material
Cross
section
Length
PU
pc(s)
Part
No.
29 mm
32 mm
40 mm
32 mm
40 mm
100
100
100
100
100
60 mm
60 mm
100 562 001
100 562 101
A MODEL
For attaching to cut conductors (Rd 8 mm = 50 mm2)
Al
Cu
25 mm2
Al
Cu
35 mm2
Al
Cu
50 mm2
Cu
Al
35 mm2
Cu
Al
50 mm2
562 250
562 035
562 050
562 135
562 150
B MODEL
For attaching to uncut conductors (Rd 8 mm = 50 mm2)
Al
Cu
50 mm2
Cu
Al
50 mm2
Cupal Sheets
562 440
562 460
For corrosion-resistant connection of steel or aluminium
and copper, striped
Material
Al / Cu
Al / Cu
te
126
sted
Dimension
(l x w x t)
500x40x0.5 mm
500x60x0.5 mm
PU
pc(s)
Part
No.
1 562 440
1 562 460
(VDE 0185 Part 201): 2000-04
www.dehn.de
562 150
562 001
562 101
374 011
374 020
CLAMPS
BIMETAL COMPONENTS
Expansion Units
For temperature-related length compensation of longer
conductors (loose conductor leading required for the
supports)
A
B
A
te
B
Material
Dimension
Ø
Fixing
hole Ø
Length
te
sted
Central
hole Ø
PU
pc(s)
sted
Part
No.
A MODEL
For connection with e.g. MV terminal (Part No. 390 051)
Al
8 mm
approx. 395 mm
25 374 011
B MODEL
For connection with e.g. KS connector (Part No. 301 000)
Note: At crossovers, 2 expansion units can be connected with a M10x20 mm screw and nut.
Al
170 mm
11 mm
11 mm
377 006
377 027
377 026
377 016
50 374 020
Bridging Brackets
A
For connecting and joining metal sheaths,
for riveting or screwing
B
B
A
te
Material
C
Length
(l1)
te
sted
C
te
sted
PU
pc(s)
sted
Fixing
hole Ø
Central
hole Ø
Part
No.
2x6.5 / 4x5.2 mm
2x6.5 / 4x5.2 mm
11 mm
11 mm
50 377 006
50 377 027
2x6.5 / 4x5.2 mm
11 mm
50 377 026
A MODEL
Short with central hole
Al
170 mm
Cu
170 mm
B MODEL
Long with central hole
Al
220 mm
C MODEL
Short without central hole
Al
170 mm
www.dehn.de
2x6.5 / 4x5.2 mm
50 377 016
127
Bridging Cables
377 210
377 310
377 410
377 510
377 220
CLAMPS
BIMETAL COMPONENTS
For connecting or bridging metal sheaths by screws
A/B
B
A
te
te
sted
Length
(l1)
sted
Cable sheath
material
Cable
material
Cross
section
Fixing
hole Ø
Insulation
PU
pc(s)
Part
No.
Al
Al
Al
Al
Cu
Cu
Cu
Cu
16 mm2
16 mm2
16 mm2
16 mm2
1x10.5 / 2x6.5 mm
1x10.5 / 2x6.5 mm
1x10.5 / 2x6.5 mm
1x10.5 / 2x6.5 mm
PVC 1
PVC 1
PVC 1
PVC 1
10
10
10
10
377 210
377 310
377 410
377 510
Al
Al
Al
Al
Cu
Cu
Cu
Cu
16 mm2
16 mm2
16 mm2
16 mm2
1x10.5 / 2x6.5 mm
1x10.5 / 2x6.5 mm
1x10.5 / 2x6.5 mm
1x10.5 / 2x6.5 mm
PVC 1
PVC 1
PVC 1
PVC 1
10
10
10
10
377 220
377 320
377 420
377 520
A MODEL
Flexible unit
200 mm
300 mm
400 mm
500 mm
B MODEL
Highly flexible unit
200 mm
300 mm
400 mm
500 mm
te
128
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
377 320
377 420
377 520
377 015
377 007
377 115
377 107
377 045
CLAMPS
BIMETAL COMPONENTS
Bridging Braids
A For connecting metal sheaths or for use as a compensation unit for expansions, for riveting or screwing
B
A
te
B
Material
te
sted
Length
Cross
section
Fixing
hole Ø
180 mm
180 mm
50 mm2
50 mm2
1x10.5 / 4x5.2 mm
1x10.5 / 4x5.2 mm
C
te
sted
Central
hole Ø
PU
pc(s)
sted
Part
No.
A MODEL
Without central hole
Al
Cu
10 377 015
10 377 007
B MODEL
With central hole
Note: At crossovers, 2 bridging braids can be connected with an M10x20 mm screw and nut
Al
300 mm
50 mm2
1x10.5 / 4x5.2 mm
10.5 mm
Cu
300 mm
50 mm2
1x10.5 / 4x5.2 mm
10.5 mm
10 377 115
10 377 107
C MODEL
N
Unit for fixing with Parker screws
Al
180 mm
50 mm2
1x10.5 / 2x6.5 mm
100 377 045
C
(VDE 0185 Part 201): 2000-04
www.dehn.de
New Products
N
te
sted
129
CLAMPS
BIMETAL COMPONENTS
130
www.dehn.de
Test Joints / Fixed Earthing Terminals
Partially isolated lead-in
earthing rod
Test joint with disconnecting sleeve
Fixed earthing terminal with
ring equipotential bonding
131
Disconnecting Sleeves
For connecting the down conductors with the earth
entries
B
A
te
C
te
sted
A
D
te
sted
Clamping range
Rd / Rd
Material
450 000
450 007
450 001
TEST JOINTS
FIXED EARTHING TERMINALS
B
te
sted
sted
Screw
type
Screw
material
PU
pc(s)
Part
No.
di M8x16 mm
di M8x16 mm
StSt (V2A)
StSt (V2A)
50 450 000
50 450 007
di M8x16 mm
StSt (V2A)
50 450 001
di M8x16 mm
StSt (V2A)
50 450 101
di M8x16 mm
StSt (V2A)
50 450 011
A MODEL
Open unit for lead-in earthing rods
ZDC
7-10 / 16 mm
RCB
7-10 / 16 mm
C
B MODEL
Open unit for lead-in earthing rods
Al
8-10 / 16 mm
C MODEL
Closed unit for wires Ø10 mm
Al
8-10 / 8 mm
D MODEL
Closed unit for lead-in earthing rods
ZDC
7-10 / 16 mm
te
132
sted
D
(VDE 0185 Part 201): 2000-04
www.dehn.de
450 101
450 011
459 129
459 139
459 003
459 119
459 000
459 029
459 020
459 039
459 030
459 019
459 010
A
UNI Disconnecting Clamps
TEST JOINTS
For connecting the down conductors with the earth
entries
B
B
A
C
D
C
te
te
sted
E
D
te
F
te
sted
Clamping range
Rd / Fl
te
sted
G
te
sted
sted
H
te
sted
PU
pc(s)
sted
Screw
type
Screw
material
Screw
distance
di M8x20 mm
StSt (V2A)
40 mm
50 459 129
di M8x20 mm
StSt (V2A)
40 mm
50 459 139
With intermediate plate for Rd and Rd conductors, thin design
St/tZn
7-10 / 7-10 mm
di M8x25 mm
StSt (V2A)
30 mm
50 459 003
di M8x20 mm
StSt (V2A)
40 mm
50 459 119
With intermediate plate for lead-in earthing rods, thin design
St/tZn
7-10 / 16 mm
di M8x25 mm
StSt (V2A)
30 mm
50 459 000
di M8x20 mm
di M8x20 mm
StSt (V2A)
StSt (V2A)
40 mm
40 mm
50 459 029
50 459 020
di M8x20 mm
di M8x20 mm
StSt (V2A)
StSt (V2A)
40 mm
40 mm
50 459 039
50 459 030
di M8x20 mm
di M8x20 mm
StSt (V2A)
StSt (V2A)
40 mm
40 mm
50 459 019
50 459 010
Material
Clamping range
Rd / Rd
te
sted
Part
No.
A MODEL
With intermediate plate for Rd and Rd conductors
StSt (V2A)
8-10 / 8-10 mm
B MODEL
E
With intermediate plate for Rd and Fl conductors
StSt (V2A)
8-10 / 30 mm
C MODEL
D MODEL
With intermediate plate for lead-in earthing rods
StSt (V2A)
8-10 / 16 mm
F
E MODEL
F MODEL
Without intermediate plate for Rd and Rd conductors
StSt (V2A)
8-10 / 8-10 mm
St/tZn
8-10 / 8-10 mm
G
G MODEL
Without intermediate plate for Rd and Fl conductors
StSt (V2A)
8-10 / 30 mm
St/tZn
8-10 / 30 mm
H VARIANTE
Without intermediate plate for lead-in earthing rods
StSt (V2A)
8-10 / 16 mm
St/tZn
8-10 / 16 mm
H
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
133
ES Disconnecting Clamps
TEST JOINTS
463 010
Single-screw unit
te
sted
Material
Clamping range
Rd / Rd
Screw
type
Screw/Nut
material
MCI/tZn
8 / 10 mm
e M10x30 mm
StSt (V2A)
PU
pc(s)
Part
No.
50 463 010
ÖN Disconnecting Clamps
460 213
460 214
With connecting screw
A
B
A
te
te
sted
sted
Clamping range
Rd / Rd
Material
Screw
type
Screw/Nut
material
PU
pc(s)
Part
No.
StSt (V2A)
50 460 213
StSt (V2A)
25 460 214
B
A MODEL
For solid round conductors
ZDC
7-10 / 7-10 mm
B MODEL
For lead-in earthing rods
ZDC
7-10 / 16 mm
te
134
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
454 100
454 107
454 000
TEST JOINTS
Connecting / Disconnecting Clamps
455 000
A Two- or three-part connection system with threaded
base part
B
A
B
te
Clamping range
Fl / Fl
te
sted
PU
pc(s)
sted
Screw type
Screw
material
di M8x20 mm
di M8x20 mm
StSt (V2A)
StSt (V2A)
25 454 100
25 454 107
Three-part unit (with intermediate plate) for Rd / Fl conductors
St/tZn
5-10 / 30-40 mm
di M8x30 mm
StSt (V2A)
25 454 000
StSt (V2A)
25 455 000
Material
Clamping range
Rd / Fl
te
sted
C
Part
No.
A MODEL
C
Two-part unit for Rd / Fl conductors
St/tZn
7-10 / 30-40 mm
Cu
7-10 / 30-40 mm
B MODEL
C MODEL
Two-part unit for Fl / Fl conductors
MCI/tZn
30 / 30 mm
di M8x25 mm
FIX Test Joints
453 100
With isolating unit and disconneting sleeve
te
Material
St/tZn
Clamping range
Rd / Fl
Screw
type
Screw/Nut
material
Isolating unit
8-10 / 30 mm
di M8x16/M8x20 mm
StSt (V2A)
plastic 1
PU
pc(s)
sted
Part
No.
10 453 100
Unit for Rd 8-10 and Rd 8-10 conductors available on request
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
135
UF Inspection Housings
TEST JOINTS
A
549 001
549 000
For underfloor mounting
B
B
A
Material
Colour
C
Dimension
(l x w x h)
Clamping range
Rd / Fl
230x150x120 mm
7-10 / 30-40 mm
Standard
Max.
load
PU
pc(s)
Part
No.
A MODEL
With test joint, no bottom
GCI
1 (lacquered)
20 kg/cm2
1 549 001
20 kg/cm2
1 549 000
10 kg/cm2
2 549 100
C
B MODEL
Without test joint, no bottom
GCI
1 (lacquered)
230x150x120 mm
DIN 48839 K
C MODEL
Without test joint, closed bottom, with cable entry 50/63/80/110 mm (removable)
plastic
262x362x255 mm
1
UP Inspection Housings
476 010
For flush mounting and concrete structures with
integrated test joint, with terminal lugs Rd 8 and
Rd 10 mm, approx. 200 mm long (insulated)
Unit with concrete construction sign
Housing
material
plastic
Dimension of
housing (l x w x h)
Cover
material
Cover dimension
(l x w)
140x140x68 mm
StSt (V2A)
160x160 mm
PU
pc(s)
Part
No.
1 476 010
For further details about use and intallation, please see installation instructions No. 1020.
Unit with flexible connecting cables made of Cu (25 mm2), Part No. 476 010/S Id. No. 039 545 available on request.
te
136
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
549 100
476 020
476 001
Inspection Doors
TEST JOINTS
A For flush-mounted test joints
A
B
B
Material
Mounting
dimension (l x w)
Dimension
(l x w)
Based on
standard
PU
pc(s)
Part
No.
A MODEL
StSt unit for screwing (hole Ø8-10 mm), with removable door and square spanner
StSt (V2A)
205x145 mm
285x225 mm
DIN 48839
1 476 020
B MODEL
Light unit for immuring/plastering, with claws (length: 60 mm, distance: 100 mm), with square spanner
St/tZn
205x155 mm
230x180 mm
www.dehn.de
10 476 001
137
Number Plates
For marking the test joints in accordance with
DIN 48821
A
B
480 005
480 006
480 003
TEST JOINTS
C
A
D
B
Material
Clamping range
Rd / Fl
Screw
type
Screw
material
PU
pc(s)
Part
No.
A MODEL
With embossed number (please confirm the numbers required when placing your order)
Al
7-10 / 30 mm
dm M6x16 mm
StSt (V2A)
1 480 005
B MODEL
With embossed number for lead-in earthing rods (please confirm the numbers required when placing your order)
Al
16 / - - mm
dm M6x16 mm
StSt (V2A)
1 480 006
C MODEL
Without numbers
Al
C
7-10 / 30 mm
dm M6x16 mm
StSt (V2A)
50 480 003
dm M6x16 mm
StSt (V2A)
50 480 004
D MODEL
Without numbers, for lead-in earthing rods
Al
16 / - - mm
Number plates with company logo and embossed numbers 0-9, size 10 mm, available on request.
D
138
www.dehn.de
480 004
480 113
480 114
480 110
Support for VDB Test Badge
TEST JOINTS
A/B
B
A
Clamping range
Rd / Fl
Material
C
Screw type
C
Screw
material
Cleat
material
Dimension
(l x w x d)
PU
pc(s)
Part
No.
StSt (V2A)
StSt (V2A)
84x58x1 mm
50 480 113
StSt (V2A)
StSt (V2A)
84x58x1 mm
50 480 114
84x58x1 mm
50 480 110
A MODEL
N
For Rd 7-10 and Fl 30 mm conductors
StSt (V2A)
7-10 / 30 mm
dm M6x16 mm
B MODEL
N
For Rd 16 mm lead-in earthing rods
StSt (V2A)
16 / - - mm
dm M6x16 mm
C MODEL
N
480 150
480 175
480 157
Without cleat
StSt (V2A)
Set of Lead-in Earthing Rods
A
Complete with disconnecting sleeve and terminals
(KS screws)
B
A
B
Material
Standard
Length
(l1)
KS screw
connection Rd
Sleeve
connection Rd / Rd
PU
pc(s)
Part
No.
A MODEL
St/tZn with disconnecting sleeve (Part No. 450 000) and KS screws (Part No. 300 000)
St/tZn
DIN EN 50164-2
1500 mm
7-10 mm
St/tZn
DIN EN 50164-2
1750 mm
7-10 mm
7-10 / 16 mm
7-10 / 16 mm
1 480 150
1 480 175
7-10 / 16 mm
1 480 157
B MODEL
Cu with disconnecting sleeve (Part No. 450 007) and KS screws (Part No. 300 007)
Cu
DIN EN 50164-2
1500 mm
6-10 mm
www.dehn.de
New Products
N
139
Lead-in Earthing Rods
For connecting the down conductors with the earthtermination system
A
B
483 150
483 200
104 903
104 905
104 906
101 150
479 150
TEST JOINTS
C
A
D
B
Diameter
Length
(l1)
16 mm
16 mm
16 mm
16 mm
16 mm
1500 mm
2000 mm
1000 mm
1500 mm
2000 mm
With welded flat tap (hole Ø11 mm)
St/tZn
DIN EN 50164-2
16 mm
1500 mm
Material
Standard
Hole
distance
Partial length Partial length
Ø16 mm (l2)
Ø10 mm (l3)
PU
pc(s)
Part
No.
A MODEL
Chamfered on both sides
St/tZn
DIN EN 50164-2
St/tZn
DIN EN 50164-2
StSt (V4A)
DIN EN 50164-2
StSt (V4A)
DIN EN 50164-2
StSt (V4A)
DIN EN 50164-2
10
10
10
10
10
483 150
483 200
104 903
104 905
104 906
B MODEL
22 mm
10 101 150
30 mm
30 mm
10 479 150
10 479 157
C
C MODEL
With welded tap for e.g. 2 KS screws (not included in delivery)
St/tZn
DIN EN 50164-2
16 mm
1500 mm
Cu
DIN EN 50164-2
16 mm
1500 mm
D MODEL
Diminished (notched conductor Ø10 mm), partly insulated (length approx. 700 mm)
St/tZn
DIN EN 50164-2
16/10 mm
1500 mm
1000 mm
St/tZn
DIN EN 50164-2
16/10 mm
1750 mm
750 mm
St/tZn
DIN EN 50164-2
16/10 mm
2000 mm
1000 mm
St/tZn
DIN EN 50164-2
16/10 mm
2500 mm
1500 mm
St/tZn
DIN EN 50164-2
16/10 mm
2250 mm
1250 mm
500 mm
1000 mm
1000 mm
1000 mm
1000 mm
10
10
10
10
10
480 018
480 019
480 020
480 021
480 022
D
140
www.dehn.de
479 157
480 018
480 019
480 020
480 021
480 022
860 115
860 130
860 215
860 230
Terminal Lugs (set)
TEST JOINTS
A For connecting the down conductors to the earth termination system made of corrosion-resistant stainless
steel (StSt (V4A)), material No. 1.4571.
In accordance with DIN EN 50164-2 (VDE 0185
Part 202).
B
A
B
Material
Length
(l1)
Dimension
Cross
section
Material
No.
Standard
PU
pc(s)
Part
No.
Ø10 mm
Ø10 mm
78 mm2
78 mm2
1.4571
1.4571
DIN EN 50164-2
DIN EN 50164-2
1 860 115
1 860 130
30x3.5 mm
30x3.5 mm
105 mm2
105 mm2
1.4571
1.4571
DIN EN 50164-2
DIN EN 50164-2
1 860 215
1 860 230
A MODEL
Solid round conductors
StSt (V4A)
1500 mm
StSt (V4A)
3000 mm
B MODEL
Tape conductors
StSt (V4A)
StSt (V4A)
1500 mm
3000 mm
Other dimensions available on request.
www.dehn.de
141
478 011
478 019
478 012
478 200
478 041
A
TEST JOINTS
Fixed Earthing Terminals
For connection with the reinforcement of buildings, connecting point for down conductors (earth termination
system), also measuring point (transient/resistance test)
at the same time
Note:
For connections M10 and M12, the screws used must
have the following minimum lengths:
M10: 35 mm (thread length 40 mm)
M12: 15 mm (thread length 20 mm)
– Allows for connection at the terminal axis with a
cross unit, e.g. Part No. 319 201, or connecting terminal, e.g. Part No. 308 025, for the reinforcement
– Using 2 fixed earthing terminals, a wall duct (adjustable to wall thicknesses of up to 360 mm) can be
installed with a parallel connector, Part No. 306 020,
for connection on both sides of earth conductors
B
– Allows for connection of an equipotential bonding
bar, e.g. sealing units, Part Nos. 363 001, 390 479,
390 489,
– Allows for connection of flat conductors at the connecting plate (front) or without terminal axis (back),
e.g terminal, Part No. 478 141
C
– Screwable or compressed terminal axis
– Snap-on (yellow) plastic cover
B
A
te
Terminal
thread (d1)
C
te
sted
te
sted
Plate
material
D
Axis
material
E
te
sted
Connecting
plate Ø
te
sted
PU
pc(s)
D
sted
Part
No.
A MODEL
Type M with terminal axis (l= 195 mm, Ø10 mm)
M10 / 12
StSt (V4A)
St/tZn
M10 / 12
StSt (V4A)
StSt (V2A)
80 mm
80 mm
10 478 011
10 478 019
80 mm
10 478 012
B MODEL
Type M without terminal axis
M10 / 12
StSt (V4A)
E
C MODEL
Type K with plastic ring and terminal axis (l= 195 mm, Ø10 mm)
M10 / 12*
StSt (V4A)
St/tZn
47 mm
10 478 200
80 mm
80 mm
10 478 041
10 478 049
47 mm
47 mm
10 478 241
10 478 249
*tested with 50 Hz currents.
D MODEL
Type M with compressed terminal axis (l= 180 mm, Ø10 mm)
M10 /12
StSt (V4A)
St/tZn
M10 / 12
StSt (V4A)
StSt (V2A)
E MODEL
Type K with compressed terminal axis (l= 180 mm, Ø10 mm)
M10 /12
StSt (V4A)
St/tZn
M10 / 12
StSt (V4A)
StSt (V2A)
For further details on use and installation, please see installation instructions No. 1476.
te
142
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
478 049
478 241
478 249
390 489
390 479
363 001
363 010
363 000
390 450
390 459
A
Sealing Units
TEST JOINTS
For screwing to the fixed earthing terminal for connection of e.g. an equipotential bonding bar
For connecting parts of the construction (e.g. steel
supports, or suchlike) by screwing or welding
B
B
A
C
D
te
C
Material
Hole
distance
Hole
Ø
Clamping
range Rd
F
E
te
sted
Screw
type
Screw/Nut
material
PU
pc(s)
sted
Part
No.
A MODEL
With square holes 11x11 mm, for connection of Rd conductors, e.g. with KS connector (Part No. 301 019),
or for connection of Fl conductors with M10 screws and nuts
StSt (V2A)
30 mm
square hole 11 mm
50 390 489
B MODEL
With square holes 11x11 mm, for connection of Rd conductors, e.g. with KS connector (Part No. 301 019),
or for connection of Fl conductors with M10 screws and nuts
StSt (V2A)
30 mm
13 mm
D
50 390 479
C MODEL
Without connecting holes, for connection of Rd and Fl conductors, e.g. by isolating clamp, Part No. 454 100 and 455 000
St/tZn
13 mm
50 363 001
D MODEL
With connecting holes Ø11 mm and KS connector
St/tZn
22 mm
11 mm
7-10 mm
50 363 010
E MODEL
With connecting holes Ø11 mm, without KS connector
St/tZn
22 mm
11 mm
50 363 000
F MODEL
With square holes 11x11 mm and double cleat
St/tZn
30 mm
square hole 11 mm
StSt (V2A)
30 mm
square hole 11 mm
8-10 mm
8-10 mm
di M8x30 mm
di M8x30 mm
StSt (V2A)
StSt (V2A)
50 390 450
50 390 459
E
F
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
143
Connecting Terminals
TEST JOINTS
with threaded bolt
478 141
For connecting Rd and Fl conductors to fixed earthing
terminals with M10/M12 thread (e.g. Part Nos. 478 011,
478 200)
Can also be mounted on the back side of the fixed
earthing terminal without terminal axis, e.g. for flat
strip
Terminal thread: M10
te
sted
Clamp
material
Clamping range
Rd / Fl
Bolt
material
Screw
type
Screw/Nut
material
Dimension
(l x w x t1/t2)
St/tZn
7-10 / 30-40 mm
StSt (V2A)
di M10x45, M8x25 mm
StSt (V2A)
70x70x4 mm
PU
pc(s)
Part
No.
10 478 141
Bushing for Roofs, Walls and Earthing Electrodes
478 310
478 320
478 330
For water-proof and presswater-proof duct of walls and
flat roofs (against stagnant water), with threaded M12
rod made of StSt (V2A)
Lead-through
length (l2)
100-200 mm
200-300 mm
300-400 mm
400-600 mm
Length of
threaded rod (l1)
Sealings
Sealing
plate Ø
Plate
material
PU
pc(s)
300 mm
400 mm
500 mm
700 mm
chloropren rubber
chloropren rubber
chloropren rubber
chloropren rubber
80 mm
80 mm
80 mm
80 mm
StSt (V4A)
StSt (V4A)
StSt (V4A)
StSt (V4A)
1
1
1
1
Part
No.
478 310
478 320
478 330
478 340
For further details, please see installation instructions No. 1332.
te
144
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
478 340
Earthing Electrodes
Connecting clamp requiring no theading
Connection for earth rods
Reinforcing clamp
Earth connection for distribution
boards at construction sites
Maxi MV terminal for reinforcement /
earthwire connections
145
Earth Rods
EARTHING ELECTRODES
A
620 150
619 157
625 150
620 101
620 151
For installing earth termination systems for
down conductor systems or transformer stations
Characteristics:
– No thickening of the cross section at the
coupling joint
– Self-closing coupling
– Corrosion resistance
– Easy storage and transport
A
B
– Universally applicable according to local
ground conditions
C
– Constant resistance values
– Easy installation with vibrating hammer
Material
Material
No.
Standard
Rod length
(l1)
Diameter
Ø (d1)
1500 mm
1500 mm
1500 mm
20 mm
20 mm
25 mm
Cu layer
PU
pc(s)
B
Part
No.
A MODEL
Type S, with lead ball in the coupling
St/tZn
DIN EN 50164-2
St / Cu
St/tZn
DIN EN 50164-2
min. 0.3 mm
10 620 150
10 619 157
10 625 150
B MODEL
Type Z, with triple knurled tenon (coupling with especially high tensile strength)
St/tZn
DIN EN 50164-2
1000 mm
20 mm
St/tZn
DIN EN 50164-2
1500 mm
20 mm
St/tZn
DIN EN 50164-2
1000 mm
25 mm
St/tZn
DIN EN 50164-2
1500 mm
25 mm
10
10
10
10
620 101
620 151
625 101
625 151
C MODEL
Type AZ, with offset knurled tenon
StSt (V4A)
1.4571
C
DIN EN 50164-2
1500 mm
20 mm
10 620 902
For further details about application and installations, please see installation instructions No. 1014.
Impact Tips
620 001
625 001
For driving down the first earth rod
Material
Type
Dimension
(d1 x l1)
PU
pc(s)
MCI/tZn
MCI/tZn
for earth rods Ø20 mm
for earth rods Ø25 mm
20x40 mm
25x45 mm
100 620 001
50 625 001
146
Part
No.
www.dehn.de
625 101
625 151
620 902
630 120
630 129
630 130
630 139
Single-Screw Terminals
EARTHING ELECTRODES
For connecting round, tape or stranded conductors to
earth rods.
Allows for cross and parallel connection.
A
B
A
te
B
te
sted
Clamping
range Rd / Fl
Clamping range
Cable
For earth
rods
Screw
type
Screw
material
10 / -30x4 mm
10 / -30x4 mm
70 mm2
70 mm2
Ø20 mm
Ø20 mm
di M10x25 mm
di M10x25 mm
StSt (V2A)
StSt (V4A)
25 630 120
25 630 129
With additional twin-screw cleat for multiple connection of round Rd 10 mm conductors
St/tZn
10 / -30x4 mm
70 mm2
Ø20 mm
di M10x45 mm
StSt (V4A)
10 / -30x4 mm
70 mm2
Ø20 mm
di M10x45 mm
StSt (V2A)
StSt (V4A)
25 630 130
25 630 139
Material
PU
pc(s)
sted
Part
No.
A MODEL
N
N
St/tZn
StSt (V4A)
B MODEL
N
N
610 010
610 020
Terminals
A For cross and parallel connection of round, tape or
stranded conductors to earth rods.
B
A
te
B
Clamping range
Rd / Fl
Material
te
sted
PU
pc(s)
sted
Clamping range
Cable
Screw
type
Screw/Nut
material
Part
No.
50-95 mm2
di M10x55 mm
StSt (V2A) mm
20 610 010
35-70 mm2
di M8x30 mm
StSt (V4A) mm
25 610 020
A MODEL
For earth rods Ø20-30 mm
St/tZn
8-12.5 / -40 mm
B MODEL
For earth rods Ø20 mm
StSt (V4A)
7-10 / -40 mm
(VDE 0185 Part 201): 2000-04
www.dehn.de
New Products
N
te
sted
147
Connecting Clamps
For connecting round conductors, cables and tape conductors with earth rods
B
A
te
C
te
sted
Clamping range
Rd / Fl
te
sted
A
D
sted
te
B
sted
Unit for
earth rods
Screw
type
Screw/Nut
material
PU
pc(s)
Ø20 mm
Ø20 mm
Ø20 mm
Ø25 mm
e M10x35 mm
di M10x30 mm
di M10x30 mm
e M10x35 mm
St/tZn
StSt (V2A)
StSt (V4A)
St/tZn
20
20
20
20
Ø20 mm
Ø25 mm
di M10x25 mm
di M10x25 mm
StSt (V2A)
StSt (V2A)
20 620 011
20 625 011
Ø20 mm
Ø25 mm
di M10x20 mm
di M10x20 mm
StSt (V2A)
StSt (V2A)
20 620 021
20 625 021
Connection on both sides with KS connectors (St/tZn)
St/tZn
7-10 mm
Ø20 mm
St/tZn
7-10 mm
Ø25 mm
di M10x25 mm
di M10x25 mm
StSt (V2A)
StSt (V2A)
10 620 012
10 625 012
Material
620 015
620 017
620 915
625 015
620 011
625 011
EARTHING ELECTRODES
Part
No.
A MODEL
Also for uncut earth conductors
St/tZn *
7-10 / -40 mm
Cu *
7-10 / -40 mm
StSt (V4A) *
7-10 / -40 mm
St/tZn
7-10 / -40 mm
620 015
620 017
620 915
625 015
B MODEL
Connection on one side with KS connector
St/tZn
7-10 mm
St/tZn
7-10 mm
C
C MODEL
Connection on one side
St/tZn
- - / -40 mm
St/tZn
- - / -40 mm
D MODEL
te
148
sted
D
(VDE 0185 Part 201): 2000-04
www.dehn.de
620 021
625 021
620 012
625 012
635 100
635 150
635 200
635 250
634 002
Profiled Earth Rod
EARTHING ELECTRODES
For installation of earth termination systems, e.g. for
antennas or distribution boards for construction sites
A
B
B
A
Material
Standard
Length
(l1)
Hole
Ø
PU
pc(s)
Part
No.
A MODEL
Profile A (50x50x3 mm), with connecting tab and holes, e.g. for KS connector
St/tZn
DIN EN 50164-2
1000 mm
2x11 / 1x13 mm
St/tZn
DIN EN 50164-2
1500 mm
2x11 / 1x13 mm
St/tZn
DIN EN 50164-2
2000 mm
2x11 / 1x13 mm
St/tZn
DIN EN 50164-2
2500 mm
2x11 / 1x13 mm
5
5
5
3
635 100
635 150
635 200
635 250
B MODEL
Profile B (30x30x3 mm), with connecting tab and hole, e.g. for KS connector
St/tZn
DIN EN 50164-2
1500 mm
1x11 mm
290 001
290 002
10 634 002
Distance Holder
A
For installing earth conductors into the foundation
level, includes safety device against loosening of the
conductor
B
A
B
Material
Support
Fl
Support
Rd
Length
PU
pc(s)
Part
No.
8-10 mm
300 mm
25 290 001
8-10 mm
280 mm
50 290 002
A MODEL
Reinforced angled unit
St/tZn
40 mm
B MODEL
Straight unit
St/tZn
www.dehn.de
40 mm
149
Connecting Clamps
EARTHING ELECTRODES
For building reinforcements, for connecting reinforced
concrete mats or reinforcements with round and flat
conductors
308 025
308 026
308 030
308 041
A
Arrangements:
(II) = parallel
(+) = cross
B
A
C
D
E
B
te
te
sted
sted
te
Clamping range Clamping range Clamping range
Rd / Rd
Rd / Fl
Fl / Fl
Material
te
sted
Screw
type
te
sted
Screw
material
PU
pc(s)
sted
Part
No.
A MODEL
For T-, cross and parallel connections
St/tZn *
(+) 6-10 / 6-10 mm (+) 6-10 / 30 mm
(II) 30 / 30 mm
di M10x25 mm StSt (V2A)
50 308 025
di M10x20 mm StSt (V2A)
25 308 026
di M10x40 mm
St/bare
25 308 030
di M12x65 mm
di M12x65 mm
St/tZn
St/bare
20 308 041
20 308 040
C
B MODEL
For T-, cross and parallel connections
St/tZn *
(+) 6-10 / 30 mm (+ / II) 30 / 30 mm
C MODEL
For T- and cross connections
St/bare
(+) 6-22 / 40 mm
D MODEL
MAXI MV clamps for T-, cross and parallel connections
St/tZn
(+ / II) 8-16 / 15-25 mm
St/bare
(+ / II) 8-16 / 15-25 mm
D
E MODEL
For T-, cross and parallel connections, no threading of the conductors required
St/tZn
(+) 10 / 30 mm (+ /II) 30 / 30 mm di M10x25 mm StSt (V2A)
StSt (V2A)
(+) 10 / 30 mm (+ / II) 30 / 30 mm di M10x25 mm StSt (V2A)
25 308 120
25 308 129
E
te
150
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
308 040
308 120
308 129
308 001
308 010
Wedge Connector
EARTHING ELECTRODES
A For T-, cross and parallel connections for use in concrete
foundations
B
A
B
Clamping range
Rd / Rd
Material
Clamping range
Rd / Fl
Clamping range
Fl / Fl
Wedge
material
PU
pc(s)
Part
No.
10 / 30x3.5-40x4 mm
30x3.5-40x4 / 30x3.5-40x4 mm
St/tZn
25 308 001
St/tZn
25 308 010
A MODEL
With lock-in position in the wedge
St/tZn *
B MODEL
No locking
St/tZn
10 / 10 mm
* tested with 50 Hz currents
308 150
Expansion Strap for Foundation Earthing Electrodes
For leading the foundation earthing electrode in expansive foundations (several sections) through the expansion or isolating joints, without requiring the leading of
the earthing electrode out of the base plate.
The expansion strap is encased into the base plate with
concrete to ensure that the polystyrene block is situated
in one section and the other end can be led further
loosely within the next section.
Strap
material
N
www.dehn.de
StSt (V2A)
New Products
N
Strap dimensions
(l x b x d)
Cross section
Block
material
Block dimensions
(l x b x d)
approx. 700x30x(4x1) mm
120 mm2
polystyrene
180x85x45 mm
PU
pc(s)
Part
No.
1 308 150
151
Expansion Straps
308 050
EARTHING ELECTRODES
For compensating expansion joints outside of the concrete when installing foundation earthing electrodes,
with washers and spring washer
Material
Al
152
Dimension
(l x w x d)
Screw
type
Screw/Nut
material
235x45x5 mm
e M10x30 mm
StSt (V2A)
PU
pc(s)
Part
No.
25 308 050
www.dehn.de
EARTHING ELECTRODES
DEHNIT Earthing Method
For improving the earthing resistance
DEHNIT is a highly swellable special clay which can
bind water to a great extent. The principle of the
DEHNIT earthing procedure is to bind the fine-grained
DEHNIT with water (by adding sand) and to sheathe
the earthing electrode. This sheathing is conductive
and enlarges the earth surface.
Compared to the common earthing procedure without
sheathing, the DEHNIT procedure offers three important advantages:
1.5 Once again fill in a DEHNIT layer of about 5 cm for
sheathing the earth conductor completely with
DEHNIT.
– A much lower earthing resistance can be achieved
even in case of a bad specific ground conductivity.
Note for processing
According to this procedure, a practical consumption of
2 kg DEHNIT has to be expected per running metre of
earth conductor ditch.
– Compared to earthing procedures without sheathing, this procedure can achieve earthing resistances
up to 50 % lower while using the same volume of
earthing electrode material (saving of earthing electrode material!).
– Earthing resistances are created which are independent from temperature and weather and largely
remain constant throughout years (see Fig. 1).
1.6 The filling has to be pounded mechanically or per
foot.
1.7 Refill the earth excavation.
1.8 Take the first resistance measurement of the earthtermination system.
2. Procedure for deep earthing
2.1 Corresponding to the length of the deep driving
earth rod, a hole has to be drilled with a diameter
of at least 10 cm greater than the diameter (or the
outer dimensions) of the earth rod.
2.2 Mix DEHNIT according to 1.1.
RE [Ω]
1400
1200
Earthing electrode
in the sand
1000
800
600
Earthing electrode
sheathed with DEHNIT
400
200
1
2
3
4
5 Years
Fig. 1
filled earth
earthing conductor
e.g. St/tZn
Fl 30 x 3.5 mm
or Rd 10 mm
approx.
0.1 m
DEHNIT
filling
approx. 0.6 ... 0.8 m
Note for processing
1 m3 DEHNIT filling requires approx. 67 kg DEHNIT.
1.1 Dig a ditch for the earth conductor
(about 0.6 ... 0.8 m deep).
1.2 Mix DEHNIT (e.g. with a concrete mixer).
The following mixing ratio has to be applied:
5 parts sand
1 part DEHNIT
… part water
0.3 m
Fig. 2
573 000
1. Procedure for surface earthing
2.3 Put the earth rod in the middle of the drilled hole
and fill DEHNIT into the remaining space. Pound
the mass at intervals of 0.5 m filling level. The last
half metre (below the earth surface) has to be
refilled with natural earth.
2.4 Take the first resistance measurement of the earthtermination system.
Note for processing
According to this procedure, a practical consumption of
0.84 kg DEHNIT has to be expected per metre depth of
the earth rod (d = 20 mm).
The final earthing resistance will be achieved after
about 3-4 months.
It corresponds approx. 1/2 – 1/3 of the value measured
immediately after the filling with DEHNIT.
After that time the earthing resistance of the DEHNIT
earth-termination system will be about 50 % lower
compared to common earth-termination systems. This
resistance value remains constant throughout years.
Please observe the following order, otherwise heavy
clodding is possible:
DEHNIT – sand – water
approx.
0.5 m
earth rod
e.g. d = 20 mm
filled earth
DEHNIT
filling
1.3 This mixture has to be filled into the ditch for the
earth conductor until a layer of about 5 cm is
formed.
1.4 The earth conductor has to be aligned straight and
laid directly on this DEHNIT layer.
d + 10 cm
Fig. 3
Material
special clay
www.dehn.de
Mixing ratio
5 parts sand / 1 part DEHNIT / 0.5 part water
PU
KG
Part
No.
25 573 000
153
EARTHING ELECTRODES
154
www.dehn.de
Equipotential bonding bar –
Industry
Equipotential bonding bar with
connection between earthing and
fixed earthing terminal
Equipotential bonding at conduits
Temporary earthing
155
K12 Equipotential Bonding Bars
EQUIPOTENTIAL BONDING
A
563 200
563 201
with snap-on terminals
For main equipotential bonding according to DIN VDE
0100 Part 410/540 and lightning equipotential bonding
according to IEC 62305-3
Type:
– Tested according to DIN VDE 0618 Part 1
– Fixing frames and cover made of grey plastic material
– Sealable cover
– Snap-on terminals, St/gal Zn (loosely included)
– With 12 contact studs
B
A
te
Reservation:
For Rd conductors, 1 contact stud each
For Fl conductors, 2 contact studs each
te
sted
B
sted
Connections
Rd
Connection
Fl
Contact
bar
Cross
section
or 10 x -10 mm
1 x -30 x 4 mm
Cu/gal Sn
30 mm2
1 563 200
UV-stabilised unit
10 x 2.5-95 mm2
or 10 x -10 mm
1 x -30x4 mm
Cu/gal Sn
30 mm2
1 563 201
Connections
PU
pc(s)
Part
No.
A MODEL
10 x 2.5-95 mm2
B MODEL
N
563 222
Accessories – Snap-on Terminal for Fl 40 Conductors
Connections
Fl
1 x -40x5 mm
Material
St/gal Zn
Reservation
Contact studs
3
PU
Part
pc(s)
No.
50 563 222
MS Equipotential Bonding Bars
563 050
0100 Part 410/540
Connections for:
7 Rd conductors 2.5 – 16 mm2
1 Rd conductor 7 – 10 mm
1 Fl conductor –30x3.5 mm or Rd conductor 8 – 10 mm
te
Type:
– Tested in accordance with DIN EN 60999-1
(VDE 0609 Part 1)
– Grey plastic cover
sted
Connections
Connection
Connection
Fl / (Rd)
Contact
bar
Cross
section
7 x 2.5-16 mm2
1 x 7-10 mm2
1 x -30x3.5 or (8-10) mm
Ms
50 mm2
te
156
sted
PU
pc(s)
Part
No.
1 563 050
(VDE 0185 Part 201): 2000-04
N
New Products
www.dehn.de
AK FL40 PAS
563 010
563 020
563 030
R15 Equipotential Bonding Bars
with terminal block system
A
according to IEC 62305-3
Type:
(VDE 0609 Part 1)
– 15 modules
– (Grey) plastic bar frames and cover
– Sealable cover
– Terminal blocks St/gal Zn
A
B
C
B
te
Connection
Fl
te
te
sted
PU
pc(s)
sted
Clamping
bar
Cross
section
Type A:
7 terminal blocks for Rd conductors 2.5 – 16 mm2
2 terminal blocks for Rd conductors 16 – 95 mm2 or Rd 8 – 10 mm
1 terminal block Fl –30x4 mm
7 x 2.5-16 mm2
2 x (8-10 mm) or 16-95 mm2
1 x -30x4 mm
Ms/gal Sn
100 mm2
1 563 010
100 mm2
1 563 020
100 mm2
1 563 030
Connections
Connections
(Rd)
sted
Part
No.
A MODEL
C
B MODEL
Type B:
3 terminal blocks for Rd conductors 16 – 95 mm2 or Rd 8 – 10 mm
1 terminal block Fl –30x4 mm
5 x 2.5-16 mm2
3 x (8-10 mm) or 16-95 mm2
1 x -30x4 mm
Ms/gal Sn
C MODEL
Type C:
1 terminal block for Rd conductors 16 – 95 mm2 or Rd 8 – 10 mm
13 x 2.5-16 mm2 1 x (8-10 mm) or 16-95 mm2
Ms/gal Sn
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
157
Equipotential Bonding Terminals
with terminal block system / construction kit
Universal component system for the assembly of individual equipotential bonding bars
Terminal Blocks
Up to 16 mm2
te
sted
Connection
2.5-16 mm2
Material
StSt (V2A)-St/gal Zn
PU
Part
pc(s)
No.
200 563 011
Modules
1
563 011
RK 16 PAS
563 013
RK 95 PAS
563 012
RK FL30 PAS
563 019
RK FL40 PAS
563 016
KS 198 PAS
563 017
KS 398 PAS
563 018
KS 798 PAS
563 014
SB PAS RK
563 015
AH PAS RK
Terminal Blocks
Up to 95 mm2 or Rd 8-10 mm
te
sted
Connection
Rd
or 8-10 mm
Connection
16-95 mm2
Material
St/gal Zn
PU
Part
pc(s)
No.
100 563 013
Modules
2
Terminal Blocks
Flat conductor 30 mm
te
sted
Connection
Fl
-30x4 mm
Material
St/gal Zn
PU
Part
pc(s)
No.
25 563 012
Modules
4
Terminal Blocks
Flat conductor 40 mm
te
sted
Connection
Fl
-40x5 mm
Material
St/gal Zn
PU
Part
pc(s)
No.
25 563 019
Modules
5
Clamping Bar
Length
(l1)
198 mm
398 mm
798 mm
Modules
15
30
60
Material
Ms/gal Sn
Ms/gal Sn
Ms/gal Sn
Cross
section
100 mm2
100 mm2
100 mm2
Qty of
bar frames
2
4
8
Qty of
covers
1
2
4
PU
Part
pc(s)
No.
10 563 016
10 563 017
10 563 018
Bar Frame
Material
plastic
Colour
1
Fixing
holes
6x4 mm
PU
Part
pc(s)
No.
50 563 014
Covers
Snap-on units
Material
plastic
158
Colour
1
Modules
15
PU
Part
pc(s)
No.
10 563 015
www.dehn.de
563 105
563 103
Equipotential Bonding Bars
with miniature terminal block system
A For main equipotential bonding according to DIN VDE
0100 Part 410/540 in small-sized installations
Type:
(VDE 0609 Part 1)
– Terminal block St/gal Zn
B
A
B
te
Connections
Clamping bar
Cross
section
Bar
frames
te
sted
Box dimension
(l x w x d)
PU
pc(s)
sted
Part
No.
A MODEL
For main equipotential bonding according to DIN VDE 0100 Part 410/540 at small-sized installationsMiniature unit: For surface
mounting without cover
6 x 2.5-16 mm2
Ms/gal Sn
100 mm2
P
10 563 105
B MODEL
Unit for flush mounting: In box with plastic cover, white (sealable)
7 x 2.5-16 mm2
Ms/gal Sn
100 mm2
100x100x50 mm
5 563 103
UNI Equipotential Bonding Bars
472 000
with base plate
0100 Part 410/540
Type:
– Base plate St/tZn
– Cover St/tZn
– Contact surface Cupal (in part)
– (White) plastic knurled nut
– With cover
Connections
Connection
Rd
Connection
Fl
Clamping bar
Cross section
Dimension
(l x w x h)
6 x 2.5-16 / 1 x 50 mm2
1 x 8-10 mm
1 x -30 mm
St/tZn
160 mm2
362x112x70 mm
PU
pc(s)
1 472 000
(VDE 0185 Part 201): 2000-04
www.dehn.de
Part
No.
te
sted
159
for Industrial Installations
according to DIN V VDE V 0185
Also for use in explosive zones
(screws protected against self-loosening)
Type:
– Insulator for flush mounting (red Duroplast) with
M10 thread
– UV-stabilised
472 207
472 209
472 227
472 229
472 217
A
B
B
A
te
C
te
sted
D
te
sted
E
te
sted
sted
Dimension
(l x w x t1)
Cross
section
Screw
type
Screw/Nut
material
Spring
washer
6 connections with insulators
Cu
295x40x5 mm
StSt (V2A)
295x40x6 mm
200 mm2
240 mm2
d i M10x25 mm
d i M10x25 mm
StSt (V2A)
StSt (V2A)
3
3
1 472 207
1 472 209
200 mm2
240 mm2
d i M10x25 mm
d i M10x25 mm
StSt (V2A)
StSt (V2A)
3
3
1 472 227
1 472 229
200 mm2
240 mm2
d i M10x25 mm
d i M10x25 mm
StSt (V2A)
StSt (V2A)
3
3
1 472 217
1 472 219
200 mm2
240 mm2
d i M10x25 mm
d i M10x25 mm
StSt (V2A)
StSt (V2A)
3
3
1 472 237
1 472 239
8 connections with connecting holes Ø13 mm, without insulators
Cu
500x40x5 mm
200 mm2
d i M10x25 mm
StSt (V2A)
Material
PU
pc(s)
Part
No.
A MODEL
C
B MODEL
Cu
365x40x5 mm
StSt (V2A)
365x40x6 mm
D
C MODEL
Cu
435x40x5 mm
StSt (V2A)
435x40x6 mm
D MODEL
Cu
505x40x5 mm
StSt (V2A)
505x40x6 mm
E
E MODEL
1 472 257
Customised units available on request.
te
160
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
472 219
472 237
472 239
472 257
472 210
Accessories
Insulator for EBB (Industry)
IS PAS M10
Insulator
material
UP (Duroplast)
Terminal
thread
M10
Colour of
insulator
red
Dimension
(d x h)
32x40 mm
PU
Part
pc(s)
No.
1 472 210
Covers for EBB (Industry)
472 279
AD PAS 6AP V2A
472 269
AD PAS 8AP V2A
472 289
AD PAS 10AP V2A
472 299
AD PAS 12AP V2A
Covers for EBB with insulators
EB
type
6 connections
8 connections
10 connections
12 connections
472 201
Dimension
(l x w x d)
301x60x0.8 mm
371x60x0.8 mm
441x60x0.8 mm
511x60x0.8 mm
Cover
material
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
Distance
bolt
M10/M6
M10/M6
M10/M6
M10/M6
Screw/Nut
material
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
PU
Part
pc(s)
No.
1 472 279
1 472 269
1 472 289
1 472 299
Fixing Set for EBB (Industry)
BS M10 PAS
Screw
material
St/tZn
www.dehn.de
Screw
type
45 mm c M10x20 mm
Plastic
dowel
Ø 12x60 mm
Total
length
80 mm
PU
Part
pc(s)
No.
1 472 201
161
Earthing Busbars
For screwing or welding at steel structures
Connection possibilities:
472 023
472 109
472 022
472 119
472 024
A
– Flat strip: with hexagon M10 screws, nuts and spring
washer
– Solid round conductors: with KS connector,
e.g. Part No. 301 000 or 301 019
A
Material
B
Cross
section
C
Connecting
hole Ø
B
D
Dimension
(l x w x t1)
PU
pc(s)
Part
No.
A MODEL
2 connections
St/tZn
StSt (V2A)
C
360 mm2
300 mm2
11 mm
11 mm
196x60x6 mm
196x60x5 mm
1 472 023
1 472 109
360 mm2
300 mm2
11 mm
11 mm
241x60x6 mm
241x60x5 mm
1 472 022
1 472 119
B MODEL
3 connections
St/tZn
StSt (V2A)
C MODEL
4 connections
St/tZn
StSt (V2A)
D
mm2
360
300 mm2
11 mm
11 mm
293x60x6 mm
293x60x5 mm
1 472 024
1 472 129
360 mm2
300 mm2
11 mm
11 mm
392x60x6 mm
392x60x5 mm
1 472 021
1 472 139
D MODEL
6 connections
St/tZn
StSt (V2A)
Specified units available on request.
162
www.dehn.de
472 129
472 021
472 139
540 001
540 002
540 910
540 911
540 912
540 900
540 901
For integrating pipes into the equipotential bonding
according to DIN VDE 0100 with continuously
adjustable tensioning strap
A
B
A
C
D
B
te
Material
Pipe clamping
range Ø
sted
Screw
type
te
sted
Screw Strap dimension PU
material
(l1 x w x d)
pc(s)
Part
No.
A MODEL
1 conductor terminal, cross-sectional area 2.5-6 mm2
Ms/gal Sn / bronze †-1 … “ 13.5-48.3 mm
Ms/gal Sn / bronze †-3 “ 13.5-88.9 mm
g M6x10 mm
g M6x10 mm
St/gal Zn 190x10x0.25 mm
St/gal Zn 325x10x0.25 mm
20 540 001
20 540 002
For connection of 1 or 2 conductors with through-wiring, cross-sectional area 4-25 mm2
StSt (V2A)
¬-2 “ 26.9-60.3 mm di M8x20 / dm M6x16 mm StSt (V2A) 240x25x0.3 mm
StSt (V2A)
¬-4 “ 26.9-114.3 mm di M8x20 / dm M6x16 mm StSt (V2A) 410x25x0.3 mm
StSt (V2A)
¬-6 “ 26.9-165 mm di M8x20 / dm M6x16 mm StSt (V2A) 570x25x0.3 mm
10 540 910
10 540 911
10 540 912
B MODEL
C
C MODEL
Separate grip holder, for combination with continuous tensioning strap (Part No. 540 901), cross-sectional area 4-25 mm2
StSt (V2A)
di M8x20 / dm M6x16 mm StSt (V2A)
50 540 900
D MODEL
StSt (V2A)
... x25x0.3 mm
1 540 901
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
163
PA Earthing Pipe Clamps
409 007
409 147
409 387
409 127
For integrating pipes into the equipotential bonding
according to DIN VDE 0100
A
B
A
te
Pipe clamping
range Ø
Material
sted
Cross-sectional
area
Screw
type
Screw
material
Dimension
(l1 x r1)
PU
pc(s)
Part
No.
A MODEL
For copper pipes Ø 8-10 mm
Cu
8-10 mm
B
2.5-16
mm2
dm M6x16 mm
StSt (V2A)
51x4.5 mm
50 409 007
dm M6x16 mm
dm M6x16 mm
dm M6x16 mm
dm M6x16 mm
dm M6x16 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
35x6.8 mm
40x8.4 mm
45x10.6 mm
50x13.4 mm
55x16.8 mm
25
25
25
25
25
B MODEL
For copper pipes according to DIN 2440 and DIN 2441
Cu
† “ 13.5 mm
2.5-16 mm2
Cu
— “ 17.2 mm
2.5-16 mm2
Cu
… “ 21.3 mm
2.5-16 mm2
Cu
¬ “ 26.9 mm
2.5-16 mm2
Cu
1 “ 33.7 mm
2.5-16 mm2
te
164
sted
409 147
409 387
409 127
409 347
409 107
(VDE 0185 Part 201): 2000-04
www.dehn.de
409 347
409 107
408 014
408 038
408 012
408 034
408 100
408 114
408 112
407 012
407 034
407 100
407 114
407 112
407 200
410 038
410 012
410 034
410 100
410 114
410 112
410 134
410 200
410 212
410 300
410 309
410 319
410 329
410 339
410 349
410 359
410 369
410 379
410 389
410 399
BS Earthing Pipe Clamps
For application according to IEC 62305-3 and
DIN VDE 0100
For steel pipes according to DIN 2440 and 2441
B
A
te
Pipe clamping
range Ø
A
B
C
www.dehn.de
C
te
sted
sted
Screw
type
Screw/Nut
material
Dimension
(l1 x r1)
PU
pc(s)
dm M6x14 mm
dm M6x14 mm
dm M6x14 mm
dm M6x14 mm
dm M6x14 mm
dm M6x14 mm
dm M6x14 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
49x7 mm
52.5x9 mm
57x11 mm
62.5x14 mm
69x17.5 mm
78x21.5 mm
85x24.5 mm
25
25
25
25
25
25
25
408 014
408 038
408 012
408 034
408 100
408 114
408 112
Connection for Rd 4-10 mm conductors or conductor cross sections of max. 70 mm2
…“
21.3 mm
MCI-St/tZn
di M10x30 / M8x20 mm
StSt (V2A)
¬“
26.9 mm
MCI-St/tZn
StSt (V2A)
1“
33.7 mm
MCI-St/tZn
StSt (V2A)
1 † “ 42.4 mm
MCI-St/tZn
StSt (V2A)
1 … “ 48.3 mm
MCI-St/tZn
StSt (V2A)
2“
60.3 mm
MCI St/tZn
StSt (V2A)
80x11 mm
83x14 mm
85x17.5 mm
100x24.5 mm
95x22 mm
113x30.5 mm
10
10
10
10
10
10
407 012
407 034
407 100
407 114
407 112
407 200
110x8.5 mm
115x10.5 mm
115x13.5 mm
124x17 mm
132.5x21 mm
140.5x24 mm
145x27.5 mm
151x30 mm
169x38 mm
182.5x44.5 mm
110.5x8.5 mm
114.5x10.5 mm
115.5x13.5 mm
124x17 mm
132.5x21 mm
140.5x24 mm
145x27.5 mm
151x30 mm
169x38 mm
182.5x44.5 mm
25
25
25
25
25
25
25
25
20
15
25
25
25
25
25
25
25
25
20
15
410 038
410 012
410 034
410 100
410 114
410 112
410 134
410 200
410 212
410 300
410 309
410 319
410 329
410 339
410 349
410 359
410 369
410 379
410 389
410 399
Material
Part
No.
A MODEL
Conductor cross section 4-25 mm2
†“
13.5 mm
ZDC
—“
17.2 mm
ZDC
…“
21.3 mm
ZDC
¬“
26.9 mm
ZDC
1“
33.7 mm
ZDC
1 † “ 42.4 mm
ZDC
1 … “ 48.3 mm
ZDC
B MODEL
C MODEL
Connection for Fl conductors with M10 screws and nuts, for Rd conductors 7-10 mm ,
e.g. KS connector, Part No. 301 000, or clamping frame, Part No. 390 150
—“
17.2 mm
St/tZn
di M8x20 mm
StSt (V2A)
…“
21.3 mm
St/tZn
di M8x20 mm
StSt (V2A)
¬“
26.9 mm
St/tZn
di M8x20 mm
StSt (V2A)
1“
33.7 mm
St/tZn
di M8x20 mm
StSt (V2A)
1 † “ 42.4 mm
St/tZn
di M8x20 mm
StSt (V2A)
1 … “ 48.3 mm
St/tZn
di M8x20 mm
StSt (V2A)
1 ¬ “ 54.5 mm
St/tZn
di M8x20 mm
StSt (V2A)
2“
60.3 mm
St/tZn
di M8x20 mm
StSt (V2A)
2 … “ 76.1 mm
St/tZn
di M8x20 mm
StSt (V2A)
3“
88.9 mm
St/tZn
di M8x20 mm
StSt (V2A)
—“
17.2 mm
StSt (V2A)
di M8x20 mm
StSt (V2A)
…“
21.3 mm
StSt (V2A)
di M8x20 mm
StSt (V2A)
¬“
26.9 mm
StSt (V2A)
di M8x20 mm
StSt (V2A)
1“
33.7 mm
StSt (V2A)
di M8x20 mm
StSt (V2A)
1 † “ 42.4 mm
StSt (V2A)
di M8x20 mm
StSt (V2A)
1 … “ 48.3 mm
StSt (V2A)
di M8x20 mm
StSt (V2A)
1 ¬ “ 54.5 mm
StSt (V2A)
di M8x20 mm
StSt (V2A)
2“
60.3 mm
StSt (V2A)
di M8x20 mm
StSt (V2A)
2 … “ 76.1 mm
StSt (V2A)
di M8x20 mm
StSt (V2A)
3“
88.9 mm
StSt (V2A)
di M8x20 mm
StSt (V2A)
165
Pipe Clamps for Antennas
540 103
540 100
540 110
For connection at antenna masts with continuously
adjustable tensioning strap for 1 or 2 conductor terminals and through-wiring
B
A
te
C
te
sted
sted
Pipe clamping
range Ø
Material
A
Screw
type
Screw
material
Strap dimension PU
(l1 x w x d)
pc(s)
Part
No.
A MODEL
For connection: 1 Rd conductor 10 mm, 1 or 2 Rd conductors 6-8 mm or 4-25 mm2
StSt (V2A)
¬-3“
26.9-88.9 mm
di M8x20 mm
StSt (V2A)
StSt (V2A)
¬-6“
26.9-165 mm
di M8x20 mm
StSt (V2A)
B
330x25x0.3 mm
570x25x0.3 mm
10 540 103
10 540 100
B MODEL
Separate grip holder, for combination with continuous tensioning strap (Part No. 540 901),
connection for 1 Rd conductor 10 mm or 2 Rd conductors 6-8 mm or 4-25 mm2
StSt (V2A)
di M8x20 mm
StSt (V2A)
50 540 110
C MODEL
StSt (V2A)
...x25x0.3 mm
1 540 901
BS Pipe Clamp with Tines
540 200
For connecting pipes with surface protection into the
lightning equipotential bonding and equipotential
bonding according to VDE 0100 Part 410/540.
Applicable for surfaces (e.g. lacquers, powder coatings)
up to a layer thickness of 0.2 mm.
The special tines penetrate the surface protection.
Removing the surface protection at the contact point is
therefore not necessary any more. Tested with lightning
currents according to DIN EN 50164-1
(VDE 0185 Part 201) with 50 kA (10/350 μs).
te
For connection:
1 Rd conductor 10 mm,
1 or 2 Rd conductors 6-8 mm or 4-25 mm2
sted
Pipe clamping
range Ø
Material
StSt (V2A)
te
166
sted
¬-6“
26.9-165 mm
Screw
material
Screw type
StSt (V2A)
di M8x20 mm
Strap dimension PU
(l1 x w x d)
pc(s)
570x25x0.3 mm
Part
No.
1 540 200
N
(VDE 0185 Part 201): 2000-04
N
New Products
www.dehn.de
540 901
420 100
420 120
420 107
420 127
423 010
423 011
423 017
423 019
423 020
423 021
423 027
423 029
423 200
423 207
423 209
Downpipe Clamps
For connecting conductors and downpipes
Connections for Rd, e.g. with KS connector,
Part No. 301 000, or with clamping frame,
Part No. 390 150 (according to material)
A
B
A
te
Material
Pipe clamping
range Ø (d1)
Length
(l1)
te
sted
C
te
sted
Hole
Ø
Screw/Nut
material
Screw
type
PU
pc(s)
11 mm
11 mm
11 mm
11 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
StSt (V2A)
di M8x25 mm
di M8x25 mm
di M8x25 mm
di M8x25 mm
50
50
50
50
sted
Part
No.
A MODEL
For fixed pipe cross sections
St/tZn
100 mm
St/tZn
120 mm
Cu
100 mm
Cu
120 mm
420 100
420 120
420 107
420 127
B MODEL
B
C
Type RV, adjustable, with additional protection against twisting of the fixing screw and markings, predetermined bending
points as well as stamped cutting aids
St/tZn
60-100 mm
337 mm
10.5 mm
StSt (V2A)
di M8x25 mm 50 423 010
Al
60-100 mm
337 mm
10.5 mm
StSt (V2A)
di M8x25 mm 50 423 011
Cu
60-100 mm
337 mm
10.5 mm
StSt (V2A)
di M8x25 mm 50 423 017
StSt (V2A)
60-100 mm
337 mm
10.5 mm
StSt (V2A)
di M8x25 mm 50 423 019
St/tZn
60-150 mm
494 mm
10.5 mm
StSt (V2A)
di M8x25 mm 50 423 020
Al
60-150 mm
494 mm
10.5 mm
StSt (V2A)
di M8x25 mm 50 423 021
Cu
StSt (V2A)
60-150 mm
60-150 mm
494 mm
494 mm
10.5 mm
10.5 mm
StSt (V2A)
StSt (V2A)
di M8x25 mm
di M8x25 mm
50 423 027
50 423 029
11 mm
11 mm
11 mm
StSt (V2A)
StSt (V2A)
StSt (V2A)
di M8x20 mm
di M8x20 mm
di M8x20 mm
1 423 200
1 423 207
1 423 209
C MODEL
Adjustable, for any forms of cross sections
St/tZn
up to 200 mm
800 mm
Cu
up to 200 mm
800 mm
StSt (V2A)
up to 200 mm
800 mm
(VDE 0185 Part 201): 2000-04
www.dehn.de
te
sted
167
Pipe Clamps for Roof Supports
410 212
410 300
For connection of spark gaps at roof supports
te
sted
Pipe clamping
range Ø
2…“
3“
76.1 mm
88.9 mm
Material
Hole
Ø
Screw
type
Screw/Nut
material
Dimension
(l1xr1)
St/tZn
St/tZn
11 mm
11 mm
di M8x20 mm
di M8x20 mm
StSt (V2A)
StSt (V2A)
169x38 mm
182.5x44.5 mm
PU
pc(s)
Part
No.
20 410 212
15 410 300
Earthing Tongs
546 025
546 002
546 000
For connection to tank cars, aircraft, etc.,
For conducting static discharges
Allows for use in explosive areas
A
B
A
Tongs
material
Clamping
range
Length
Terminal
screw
Connection
of nut
Screw
material
PU
pc(s)
Part
No.
A MODEL
Brass jaw with steel tips (Material No. 1.4104) and copper contact clip;
Connection: panhead screw with slot or with enclosed cable lug 25 mm2 – M6 (Cu/gal Sn)
St/gal Zn
Rd -16/ Fl -13 mm
140 mm
M6x12 mm
StSt (V2A)
Rd -16 / Fl -13 mm
140 mm
M6x12 mm
B
StSt (V2A)
StSt (V2A)
1 546 025
1 546 002
StSt (V2A)
StSt (V2A)
1 546 000
1 546 001
B MODEL
Brass jaw without steel tips and copper contact clip; Connection: threaded bolt with nut
St/gal Zn
Rd -55 / Fl -45 mm
205 mm
M10
StSt (V2A)
Rd -55 / Fl -45 mm
205 mm
M10
For further details, please see also installation instructions No. 1530.
te
168
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
546 001
439 000
Pipe Earthing Clamps
For connections or bridging equipment
Type:
– T pin shaft
– Material St/gal Zn
– Trapezium thread 12x3 mm
!
Material
Pipe
connection Ø
Terminal
screw
Screw
material
MCI/tZn
20-60 mm
di M8x16 mm
StSt (V2A)
PU
pc(s)
Part
No.
1 439 000
Bridging Cable
439 016
For bridging equipment, insulated with 2 notch-type
cable lugs for connecting earthing tongs, pipe earthing
clamps and chain pipe clamps
te
Material
!
Cu
Hole
Ø
Length
Conductor
Cross
section
8.5 mm
1500 mm
PVC conductor FLYKH 1
16 mm2
PU
pc(s)
sted
Part
No.
1 439 016
Other lengths and cable cross sections available on request.
(VDE 0185 Part 201): 2000-04
www.dehn.de
Discontinued Types
!
te
sted
169
Components for
Ring Equipotential Bonding
277 230
277 237
with pressure plate
For wall mounting with M8 screw
for tape conductors up to 11 mm and round conductors
6-10 mm.
CH
material
Wall
distance
Fixing
slot
Slot
width
Screw
type
Screw
material
St/tZn
11 mm
7x15 mm
12 mm
dj M8x25 mm
StSt (V2A)
25 277 230
N
Cu
StSt (V2A)
11 mm
11 mm
7x15 mm
7x15 mm
12 mm
12 mm
dj M8x25 mm
dj M8x25 mm
StSt (V2A)
StSt (V2A)
25 277 237
25 277 239
N
170
PU
pc(s)
N
Part
No.
New Products
N
www.dehn.de
277 239
277 130
Conductor Holder
For installing round and flat conductors for equipotential bonding, e.g. in transformer stations, processor
rooms
Insulated conductor holder
CH
Rd / Fl
Material
Colour
Screw
type
Screw
material
6-13 / 30x4 mm
plastic
1
dh M6x16 mm
PA
PU
pc(s)
Part
No.
50 277 130
Terminals
563 169
For universal connection with the ring equipotential
bonding for St/tZn, copper or stainless steel (StSt)
CH
Rd / Fl
8-10 / 3-11x30 mm
www.dehn.de
Material
Cross-sectional
area
Screw
type
Screw
material
StSt (V2A)
2.5-95 mm2
dj M6x16/20 mm
StSt (V2A)
PU
pc(s)
Part
No.
50 563 169
171
Cross Units
314 300
314 307
314 310
for aboveground connection
For connecting conductors in cross and T arrangements
A
B
A
te
Clamp
material
sted
Rd / Rd
te
sted
Clamping range
Rd / Fl
Fl / Fl
Screw
type
Screw
material
Dimension
(l x w x d)
PU
pc(s)
Part
No.
B
A MODEL
St/tZn
8-10 / 8-10 mm
Cu
8-10 / 8-10 mm
8-10 / 30 mm 30 / 30 mm
8-10 / 30 mm 30 / 30 mm
dj M6x20 mm
dj M6x20 mm
StSt (V2A) 50x50x2.5 mm
50 314 300
50 314 307
8-10 / 30 mm 30 / 30 mm
dj M6x20 mm
50 314 310
B MODEL
With intermediate plate
St/tZn
8-10 / 8-10 mm
te
172
sted
(VDE 0185 Part 201): 2000-04
www.dehn.de
316 163
316 167
Wire straightener
Hammer frame
Corrosion protection
in the soil
173
Wire Straighteners
TOOLS AND ACCESSORIES
For straigtening round conductors made of different
(medium-hard) materials
A
B
C
597 004
597 005
597 003
A
D
B
Coil
material
Dimension
(l x w)
MCI/gal Zn
approx. 180x290 mm
1 597 004
MCI/gal Zn
approx. 670x181 mm
1 597 005
10 straightening coils, with derrick for fixed installation
St/tZn
7-10 mm
MCI/gal Zn
approx. 1350x580 mm
1 597 003
Material
Support
Rd
PU
pc(s)
Part
No.
A MODEL
5 straightening coils, with handles
St/tZn
7-10 mm
C
B MODEL
10 straightening coils, with handles
St/tZn
7-10 mm
C MODEL
D MODEL
10 straightening coils, movable on rubber wheels, with wire unwinding device, option of processing rings with an
inner diameter of 450-800 mm and widths up to 150 mm (also suitable for unwinding steel strips)
St/tZn
7-10 mm
MCI/gal Zn
approx. 1680x1090 mm
1 597 006
D
174
www.dehn.de
597 006
596 000
595 000
Straightening Iron Element
A For angling and straightening conductors
B
A
B
Material
Application
Rd / Fl
Length
Weight
PU
pc(s)
Part
No.
8-10 / -4 mm
260 mm
623 g
5 596 000
260 mm
322 g
5 595 000
A MODEL
Straight
St/barnished
B MODEL
Cranked with a width of A/F 10 for screwing
St/barnished
8 mm
Spider Wrench
572 000
Material
St/barnished
www.dehn.de
A/F
Dimension
10, 13, 17, 19 mm
PU
pc(s)
Part
No.
1 572 000
175
Hammer Frames
600 003
For driving down 1 and 1.5 m long earth rod bars with
vibrating hammers.
The device features a solid and useful structure and is
easily transportable.
The attached cable winch allows for safe conduct of the
hammer.
The delivery of the hammer frame includes no hammer
guiding rider.
Material
St/tZn
PU
pc(s)
Height
2550 mm
Part
No.
1 600 003
For working with the hammer frame, instructions No. 1171 (incl. spare part list) has to be observed.
Hammer Guiding Rider
600 029
600 035
For vibrating hammers made by the manufacturers
stated below
Manufacturer
Atlas Copco
Wacker
Bosch
176
Types
Material
Cobra Combi
EH 23/230, EH 22/400, BH 23 and BHF 30
GSH 27
St/tZn
St/tZn
St/tZn
PU
pc(s)
Part
No.
1 600 029
1 600 035
1 600 050
www.dehn.de
600 050
620 005
620 007
620 008
620 019
620 029
625 005
625 007
625 008
625 019
625 029
Hammer Inserts
For driving down earth rods with vibrating hammers
B
A
For equipment
made by
Type
Connection
Material
PU
Length pc(s)
Part
No.
round Ø27x80 mm
hexagon SW 22x108 mm
hexagon SW25x108 mm
hexagon SW28x160 mm
hexagon SW28 (1 1/8”)
St/bare
St/bare
St/bare
St/bare
St/bare
200 mm
240 mm
240 mm
350 mm
250 mm
1
1
1
1
1
620 005
620 007
620 008
620 019
620 029
round Ø27x80 mm
hexagon SW22x108 mm
hexagon SW25x108 mm
hexagon SW28x160 mm
hexagon SW28 (1 1/8”)
St/bare
St/bare
St/bare
St/bare
St/bare
200 mm
240 mm
240 mm
350 mm
250 mm
1
1
1
1
1
625 005
625 007
625 008
625 019
625 029
A MODEL
Unit for earth rods Ø20 mm, types S + Z + AZ
Wacker
EH 23/230, 22/400, BH 23 and BHF 30
Atlas Copco
Cobra Combi, Cobra Standard
Atlas Copco
TEX 15 PE, 19 PE, 23 PE
Atlas Copco TEX 28 HE, 27 H, 15 PE, 19 PE, 23 PE, 22 PS
Bosch
GSH 27
B MODEL
Unit for earth rods Ø25 mm, types S + Z
Wacker
EH 23/230, 22/400, BH 23 and BHF 30
Atlas Copco
Cobra Combi, Cobra Standard
Atlas Copco
TEX 15 PE, 19 PE, 23 PE
Atlas Copco TEX 28 HE, 27 H, 15 PE, 19 PE, 23 PE, 22 PS
Bosch
GSH 27
Unit for other types of hammers available on request.
Special hammer insert for earth rods D = 20 mm made of StSt
for Wacker equipment, Part No. 620 005/S Id. No. 046 377 available on request.
Driving Heads
620 002
625 002
For driving down earth rods with manual beetle
www.dehn.de
Type of earth rod
Dimension
(d1 x l1)
Material
For types S + Z + AZ (Ø 20 mm)
For types S + Z (Ø 25 mm)
13x42 mm
16x47 mm
St/bare
St/bare
PU
pc(s)
Part
No.
1 620 002
1 625 002
177
Anticorrosive Bands
556 125
556 130
For coating under- and aboveground connections
For use in the soil according to DIN 30672,
delivered in reels, length: 10 m
UV-stabilised
Bandwidth
PU
pc(s)
Material
50 mm
100 mm
petrolatum
petrolatum
Part
No.
24 556 125
12 556 130
Heat-shrinkable Sleeves
554 011
For coating Rd and Fl conductors, e.g. for guiding terminal lugs out of concrete or from earth entries out of the
ground
UV-resistant unit, length according to request.
Size
Application
Rd / Fl
Material
Colour
1“
16 / 30 mm
DERAY
1
PU
pc(s)
Part
No.
50 554 011
Special Coating Paint
559 010
559 011
For lightning protection components and conductors,
weather resistant.
Even weathered and (hot dip) galvanized surfaces and
aluminium sheets can be coated without pretreatment.
Colour
Contains
1
1
0.75 litres
0.75 litres
178
PU
pc(s)
Part
No.
1 559 010
1 559 011
www.dehn.de
200 600
200 601
For fixing conductor and rod holders in heat insulation
interconnected systems
Drive with hexagon socket screw key, 5 mm, or with
screw driver for recessed screws, size 5 (use enclosed
adapter)
To be mounted with wood screws Ø4.5 mm
This dowel is suitable for fixing conductor holders only
if there is no risk of additional tensile forces affecting
the down conductor
B
A
Material
Thickness of
insulating material
Anchoring depth
Length
Working load of
styrofoam PS20
Working load of
HR foam plates
PU
pc(s)
Part
No.
60 mm
50 mm
35 N
60 N
50 200 600
100 mm
85 mm
60 N
85 N
50 200 601
A MODEL
Short unit
PA
B MODEL
Long unit
PA
For further details, please see also installation instructions No. 1459
528 850
528 870
Wood Screws
with threaded head
Rigid screw for fixing conductor holders with female
thread
www.dehn.de
Material
Thread
Length
(l1)
Length
(l2)
PU
pc(s)
Part
No.
St/gal Zn
St/gal Zn
M8
M8
50 mm
70 mm
32 mm
42 mm
100 528 850
100 528 870
179
GEOHM C Earth Resistance Meter
578 110
Automatic selection of measuring range and test of the
resistance of sensor and auxiliary earthing electrode
– Digital LCD indicator
– Measuring range 0.01 ... 20 000 OHM
– Measuring frequency 45 ... 200 Hz
– 3- or 4-pole measuring method
Housing
material
plastic
Dimension
(l x w x d)
Weight
275x140x65 mm
1200 g
PU
pc(s)
Part
No.
1 578 110
CA 6412 Earth Test Tongs
578 360
Usable for measuring earth loops
Automatic selection of measuring range
– Measuring range 0.1 ... 1200 OHM
– Measuring of fault currents 1 mA ... 30 A RMS
– Measuring frequency 2400 Hz
– Tongs range 32 mm
– With transport case
– Weight incl. case 1800 g
Housing
material
plastic
180
Dimension
(l x w x d)
Weight
235x100x55 mm
960 g
PU
pc(s)
Part
No.
1 578 360
www.dehn.de
578 350
TOOLS AND ACCESSORIES HANDY GEO Earth Resistance Meter
Automatic selection of measuring range and test of
sensor, auxiliary earthing electrode and earth resistance
– Measuring range 0.15 ... 2000 OHM
– 2-/3-pole measuring method
– 2-pole ac resistance test
Housing
material
plastic
Dimension
(l x w x d)
Weight
216x113x54 mm
860 g
578 340
PU
pc(s)
Part
No.
1 578 350
SATURN GEO plus Earth Resistance Meter
Automatic selection of measuring range and test of
sensor, auxiliary earthing electrode and earth resistance
– Measuring range 0 ... 20 000 OHM
– 3-/4-pole measuring method
– 2-pole ac resistance test
Housing
material
plastic
www.dehn.de
Dimension
(l x w x d)
Weight
240x180x110 mm
2100 g
PU
pc(s)
Part
No.
1 578 340
181
EP4 Continuity Tester
578 370
For measuring resistances at e.g. air-termination conductors or down conductors and supplementary reinforcing rods of buildings with a test current of 200 mA.
– Measuring range 0.01 Ω ... 2 000 Ω
– Measuring current 200 mA ranging up to 10 Ω
– Automatic storage of measured values
– Quick compensation of the measuring line
Housing
material
plastic
Dimension
(l x w x d)
Weight
230x60x40 mm
250 g
PU
pc(s)
Part
No.
1 578 370
N
Leather Case with Measuring Accessories
for Continuity Tester
582 620
For storing the continuity tester and the measuring
equipment.
Equipment included:
– 2 coilers with handles for unwinding incl. 50 m blue
measuring line, Part No. 585 320
– 1 black measuring line, 0.75 mm2, 3 m long,
with split plug on both sides, Part No. 545 020
– 1 test terminal, clamping range – 1/2”,
Part No. 588 000
Material
artificial leather
182
Dimension
(l x w x h)
PU
pc(s)
370x130x220 mm
Part
No.
1 582 620
N
New Products
N
www.dehn.de
582 600
Case for Earth Measuring
Equipment (leather)
Compact unit made of artificial leather with measuring
accessories.
The front panel of the case can be swung out.
Thus tools and devices are quickly available.
For transport, the case provides a comfortable shoulder
strap and can be closed with a combination lock.
Equipment:
– 1 coiler with handle for unwinding incl. 25 m red
– 1 coiler with handle for unwinding incl. 50 m blue
– 2 earth borers, 350 mm long, Part No. 587 460
– 2 black measuring lines 0.75 mm2 , 3 m long,
(connection between earth termination system and
earth resistance meter)
– 1 red measuring line 0.75 mm2 , 0.5 m long,
– 1 blue measuring line 0.75 mm2 , 0.5 m long,
(connection between coiler and earth borer)
– 1 testing terminal, clamping range – 1/2”,
Part No. 588 000
– The case provides an empty compartment for optional
support of either SATURN GEO plus, Handy GEO or
GEOHM C.
Dimension
(l x w x h)
400x200x240 mm
www.dehn.de
Material
artificial leather
PU
pc(s)
Part
No.
1 582 600
183
Equipment – Accessories
Earth Borer
587 460
For use as auxiliary earthing electrode and sensor for measuring earth resistances.
With hole for split plugs of the measuring line
Connection
f M5
Material
MCI/gal Zn
PU
Part
pc(s)
No.
1 587 460
Length
350 mm
588 000
Test Terminals
For measuring earthing electrodes
Connection
f M5
f M5
Material
MCI/tZn
MCI/tZn
Clamping
range
up to … ‘’
up to 1 † ‘’
Clamping
spindle
M8
M10
PU
Part
pc(s)
No.
1 588 000
1 589 000
Coilers
585 010
Empty, no measuring line
Length of
measuring line
0m
PU
Width
40 mm
Material
plastic
Colour
1
Part
pc(s)
No.
1 585 010
Coilers
Measuring lines available in blue and red colour
(please confirm the colour required when placing your order)
Length of
measuring line
25 m
Width
40 mm
Material
plastic
585 025
Colour
1
PU
Part
pc(s)
No.
1 585 025
Coilers
585 050
Length of
measuring line
50 m
184
Width
40 mm
Material
plastic
Colour
1
PU
Part
pc(s)
No.
1 585 050
www.dehn.de
589 000
Equipment – Accessories
Coilers
585 200
Empty, no measuring line
Length of
measuring line
0m
Width
80 mm
Material
plastic
Colour
1
PU
Part
pc(s)
No.
1 585 200
Coilers
585 210
Length of
measuring line
100 m
Width
80 mm
Material
plastic
Colour
1
PU
Part
pc(s)
No.
1 585 210
Measuring Lines
available separately in blue and red colour
545 000
Cross
section
0.75 mm2
www.dehn.de
Material
Cu
Designation
H05V-K
Insulation
PVC
Length
100 m
PU
Part
pc(s)
No.
1 545 000
185
Lightning Current Counter
910 001
910 007
For digital acquisition of impulse currents caused by
lightning effects.
The device is preferably installed as a discharge current
meter between the equipotential bonding bar and the
earth termination system.
Range
of response
2-100 kA (8/20 μs)
2-100 kA (8/20 μs)
Meter
Lead-through
rod Ø
Rod
material
0-99
0-99
8 mm
8 mm
St/tZn
Cu
PU
pc(s)
Part
No.
1 910 001
1 910 007
For further details on application please see also installation instructions No. 1133.
186
www.dehn.de
Isolating Spark Gaps
Isolating spark gaps at an
additional earth ring conductor
Isolating spark gaps for Ex zones
187
Protective Spark Gaps
For use at roof supports for overhead lines
ISOLATING SPARK GAPS
• For indirect connection of a roof
support for overhead lines to the
external lightning protection system
• Corrosion-resistant stainless steel
connections
DSFS:
Protective spark gap, closed unit
The function of the DSFS spark gap for roof supports is the indirect
connection of a roof support for overhead lines to the external lightning
protection system in accordance with IEC 62305.
For indirect connection of a roof support for overhead lines with the
external lightning protection system in accordance with IEC 62305
DSFS
920 000
Basic circuit diagram DSFS
DSFS:
Dimension drawing DSFS
Plastic-insulated protective spark gap for indirect connection of a roof support for
overhead lines to the external lightning protection system
DSFS
100% Lightning impulse sparkover voltage (1.2/50 µs) Uas100
Nominal discharge current (8/20 µs) In
Degree of protection
Power frequency sparkover voltage (50 Hz) Uaw
Material (connection)
Connection
Coating material
Ordering information
Type
Part No.
Packing unit
188
~ 25 kV
25 kA
IP 54
~ 10 kV
stainless steel (V2A)
slot Ø13x11 mm
plastic
DSFS
920 000
1 pc(s)
www.dehn.de
For lightning equipotential bonding
• For indirect connection/earthing of
functionally separate parts of installations when being affected by lightning
• For use in correspondence with lightning equipotential bonding according
to IEC 62305
• With corrosion-resistant stainless steel
connections
• For mounting inside of buildings, outdoors, in damp rooms as well as for
underground installation
• Extremely loadable unit
TFS: High-capacity isolating spark gap
KFSU: Isolating spark gap
For lightning equipotential bonding according to IEC 62305 as well as
for use in IT installations according to IEC 60364-5-54.
TFS / KFSU
923 023
923 021
KFSU
Dimension drawing TFS / KFSU
Basic circuit diagram TFS / KFSU
TFS / KFSU: Isolating spark gaps with plastic coating and 2 connections Rd 10 mm made of
stainless steel
Lightning impulse current (10/350 µs) Iimp
Classfication of lightning current carrying capability acc. to EN 50164-3
Nominal discharge current (8/20 µs) In
100% Lightning impulse sparkover voltage Uas 100
Power frequency sparkover voltage (50 Hz) Uaw
Operating temperature range TU
Length
Diameter of enclosure
Enclosure material
Connection
Material (connection)
Type
Part No.
Packing unit
www.dehn.de
TFS
KFSU
100 kA
H
100 kA
≤ 4 kV
≤ 2.5 kV
-20°C...+80°C
IP 65
160 mm
43 mm
steel-plastic coating
Rd 10 mm
stainless steel
—
—
100 kA
≤ 4 kV
≤ 2.5 kV
-20°C...+80°C
IP 65
160 mm
43 mm
steel-plastic coating
Rd 10 mm
stainless steel
TFS
923 023
1 pc(s)
KFSU
923 021
1 pc(s)
189
EXFS L / EXFS KU
For hazardous areas
• Unit for lightning equipotential bonding
according to IEC 62305 for hazardous
areas (Zone 2)
• Corresponds to “ATEX Directive”
94/9/EC
• Corrosion-resistant enclosure of zinc die
casting with plastic cover and flexible
conductor connection
• For bridging insulating pieces, insulating flanges, etc. in cathodic protected
pipe sections
• Highly loadable unit
ATEX-certified isolating spark gap for lightning equipotential bonding
according to IEC 62305, approved unit with flexible conductor connection
EXFS L ...: Isolating spark gap for hazardous areas with flexible connecting cable
EXFS KU: Isolating spark gap for hazardous areas with 1.5 m connecting cables for underground installation
The Ex isolating spark gaps of the EXFS L / EXFS KU product family are
used for conductive system parts which cannot be interconnected directly in hazardous zones. This affects, for example, pipe sections supplied
with a cathodic corrosion protection system.
The spark gaps EXFS L and EXFS KU certified by ATEX provide approved
and tested safety according to harmonised European standards.
The arc-resistant tungsten-copper electrodes ensure a long service life of
the Ex spark gaps.
The approved type EXFS L with flexible conductor connection adjusts itself
quickly to any application environment. The prewired spark gaps include
connecting cables with different lengths with cable lugs, M10 screws and
nuts. The flat or angled connection brackets (IF), which are available as
accessories, allow for easy connection of the spark gap at pipeline
flanges.
The EXFS KU type is enclosed by a damp-proof PVC enclosure and can be
ideally used for underground installation at insulating couplings.
190
www.dehn.de
923 060
923 061
L200
923 062
L300
EXFS L / EXFS KU
EXFS L
EXFS
EXFS
lmax = 300 mm
(avoid loops
where possible)
Dimension drawing EXFS
Installation of EXFS
EXFS L ...: Ex Isolating spark gap for aboveground installation
EXFS L100
Lightning impulse current (10/350 µs)
50 kA
Classfication of lightning current carrying capability acc. to prEN 50164-3 N
Nominal discharge current (8/20 µs)
100 kA
100% lightning impulse sparkover voltage
≤ 2.5 kV
Power frequency sparkover voltage (50 Hz)
≤ 1.2 kV
Type of protection according to EN 50014, EN 50021
II 3 G EEx nC II T4
-20°C...+80°C
IP 54
Approvals, Certifications
ZELM 03 ATEX 3192X
Length of enclosure
90 mm
63 mm
Enclosure material
zinc die casting, plastic
Connecting cable
Cable length
100 mm
Suitable for flange size
20-130 mm
Type
Part No.
Packing unit
EXFS L200
EXFS L300
50 kA
N
100 kA
≤ 2.5 kV
≤ 1.2 kV
II 3 G EEx nC II T4
-20°C...+80°C
IP 54
ZELM 03 ATEX 3192X
90 mm
63 mm
H01N2-D 25 mm2 with cable lug and M10 screw / nut
200 mm
120-230 mm
50 kA
N
100 kA
≤ 2.5 kV
≤ 1.2 kV
II 3 G EEx nC II T4
-20°C...+80°C
IP 54
ZELM 03 ATEX 3192X
90 mm
63 mm
EXFS L200
923 061
1 pc(s)
EXFS L300
923 062
1 pc(s)
EXFS L100
923 060
1 pc(s)
300 mm
220-320 mm
923011
Accessory Part for EXFS L / EXFS KU
923016
Pair of Angled Connection Brackets – IF 1 –
Pair of Flat Connection Brackets – IF 3 –
Pair of angled connection brackets for EXFS ...;
Diameter corresponds to bolt diameter of the flange screw
joint (d1 possible up to max. 60 mm)
Pair of flat connection brackets for EXFS ...;
Type
IF1
www.dehn.de
Accessory Part for EXFS L / EXFS KU
Material
St/tZn
PU
Pair
1
Part
No.
923 011
Type
IF3
Material
St/tZn
PU
Pair
1
Part
No.
923 016
191
EXFS L / EXFS KU
EXFS KU
923 019
Dimension drawing EXFS KU
EXFS KU: Ex Isolating spark gap with connecting cables for above- and
underground installation
EXFS KU
50 kA
Classfication of lightning current carrying capability acc. to prEN 50164-3
N
100 kA
100% lightning impulse sparkover voltage
≤ 2.5 kV
Power frequency sparkover voltage (50 Hz)
≤ 1.2 kV
II 3 G EEx nC II T4
-20°C...+80°C
IP 67
ZELM 03 ATEX 3192X
Length of enclosure
90 mm
63 mm
Enclosure material
Connecting cable
NYY-J-1x25 mm2
Cable length
2 x approx. 1500 mm
Type
Part No.
Packing unit
192
EXFS KU
923 019
1 pc(s)
www.dehn.de
EXFS C1 / EXFS C1 KU
For hazardous areas
• Unit for lightning equipotential bonding
according to IEC 62305 in hazardous
areas
• For bridging insulating pieces, insulating flanges, etc. in pipe sections protected against cathodic corrosion
• Especially low sparkover voltage
• Unit with extremely high loadability
and fail-safe performance
ATEX-certified isolating spark gap for lightning equipotential bonding
according to IEC 62305 with low sparkover voltage.
EXFS C1:
Isolating spark gap for hazardous areas with threaded M10 bolt and nut
EXFS C1 KU: Isolating spark gap for hazardous areas with 2 m connecting cables for underground installation
The Ex isolating spark gaps of the EXFS C1 / EXFS C1 KU product family
are used when conductive parts of installations situated in hazardous
areas cannot be connected directly.
The low sparkover voltages of the spark gaps have proved themselves for
protection when the separate installation parts had only a low insulation
resistance against each other.
The ATEX-certified spark gaps EXFS C1 / EXFS C1 KU provide approved
safety according to harmonised European standards.
The powerful Ex isolating spark gaps are supplied with a fail-safe device,
which establishes a safe operating state (short circuit) even in case of
overloads.
For connecting EXFS C1 spark gaps, prewired connecting cables with different lengths are available as accessories.
Flat and angled connection brackets (IF) make it easier to connect the
spark gaps to pipe flanges.
Type EXFS C1 KU is enclosed by a damp-proof plastic coating. Therefore,
it is ideal for underground installation at insulating couplings.
www.dehn.de
193
EXFS C1
923 070
lmax = 300 mm
(avoid loops where possible)
Type EXFS C1
Dimension drawing EXFS C1
EXFS C1: Ex Isolating spark gap made of stainless steel for aboveground installation
EXFS C1
75 kA
N
100 kA
100 % Lightning impulse sparkover voltage
≤ 0.95 kV
Power-frequency sparkover voltage (50 Hz)
≤ 0.07 kV
II 2 G EEx m II T3
-25°C...+80°C
IP 67
ZELM 02 ATEX 0096X
Length of enclosure
160 mm
50 mm
Enclosure material
stainless steel / plastic
Connection of enclosure
hexagon screw M10x16 mm and M10 nut
Type
Part No.
Packing unit
EXFS C1
923 070
1 pc(s)
923 026
923 036
923 046
Accessory Part for EXFS C1 / EXFS C1 KU
Accessory Part for EXFS C1 / EXFS C1 KU
Connecting Cable Cu 25
Pair of Angled Connection Brackets – IF 1 –
mm2
Connecting cable for EXFS C1;
With cable lug Ø10.5 mm, M10 hexagon screw and nut,
StSt (V2A) and spring washer
Type
AL EXFS L100
AL EXFS L200
AL EXFS L300
Material
Cu/gal Sn
Cu/gal Sn
Cu/gal Sn
Cross
section
25 mm2
25 mm2
25 mm2
AL EXFS L100
AL EXFS L200
AL EXFS L300
Cable PU
length pc(s)
100 mm 1
200 mm 1
300 mm 1
Part
No.
923 026
923 036
923 046
Pair of angled connection brackets for EXFS ...;
Type
IF1
Material
St/tZn
PU
Pair
1
923011
Part
No.
923 011
923016
Pair of Flat Connection Brackets – IF 3 –
Pair of flat connection brackets for EXFS ...;
Type
IF3
194
Material
St/tZn
PU
Pair
1
Part
No.
923 016
www.dehn.de
EXFS C1 KU
923 071
Dimension drawing EXFS C1 KU
EXFS C1 KU: Ex Isolating spark gap with connecting cable for
above- and underground installation
EXFS C1 KU
75 kA
N
100 kA
100 % Lightning impulse sparkover voltage
≤ 0.95 kV
Power-frequency sparkover voltage (50 Hz)
≥ 0.07 kV
II 2 G EEx m II T3
-25°C...+80°C
IP 67
Approvals, Certifications (EXFS C1)
ZELM 02 ATEX 0096X
Length of enclosure
160 mm
50 mm
Enclosure material
stainless steel / plastic
Connection of enclosure
NYY-J-1x25 mm2, approx. 2 m long
Type
Part No.
Packing unit
www.dehn.de
EXFS C1 KU
923 071
1 pc(s)
195
196
www.dehn.de
Earthing Material for Telecommunications
197
Earth Conductor,
open cable lugs
410 003
410 005
410 006
410 010
410 015
410 020
410 025
410 030
410 035
410 040
410 050
410 060
410 070
410 099
410 140
410 150
410 199
410 299
410 603
410 605
410 610
410 615
410 620
410 625
410 630
416 003
416 005
416 006
416 010
416 015
416 020
EARTHING MATERIAL FOR
TELECOMMUNICATIONS
,
Made of highly flexible copper wire, frost-proof
A
Cable
cross section
B
Cable
length (l1)
Open
cable lug
Standard
Colour
PU
pc(s)
BW*
Supply No.
Part
No.
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6150-12-156-9107
6150-12-156-8386
6150-12-156-9108
6150-12-156-8387
6150-12-156-9069
6150-12-156-9073
6150-12-156-9072
6150-12-156-9109
6150-12-156-9071
6150-12-156-9070
6150-12-156-6051
6150-12-156-9110
6150-12-156-9111
6150-12-156-9112
6150-12-156-6207
6150-12-161-4272
6150-12-156-9113
6150-12-156-9114
410 003
410 005
410 006
410 010
410 015
410 020
410 025
410 030
410 035
410 040
410 050
410 060
410 070
410 099
410 140
410 150
410 199
410 299
VG 95218
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6150-12-308-6928
410 603
410 605
410 610
410 615
410 620
410 625
410 630
A
A MODEL
Cable lug, 2x open, 2x M8/M10
10 mm2
0.35 m
10 mm2
0.55 m
10 mm2
0.65 m
10 mm2
1.05 m
10 mm2
1.55 m
10 mm2
2.05 m
10 mm2
2.55 m
10 mm2
3.05 m
10 mm2
3.55 m
10 mm2
4.05 m
10 mm2
5.05 m
10 mm2
6.05 m
10 mm2
7.05 m
10 mm2
1.0 m
10 mm2
14.0 m
10 mm2
15.0 m
10 mm2
20.0 m
10 mm2
30.0 m
B
B MODEL
Cable lug, 2x open, 1x M8/M10 and 1x M5/M6
10 mm2
0.35 m
1xM8/M10 1xM5/M6
10 mm2
0.55 m
1xM8/M10 1xM5/M6
10 mm2
1.05 m
1xM8/M10 1xM5/M6
10 mm2
1.55 m
1xM8/M10 1xM5/M6
10 mm2
2.05 m
1xM8/M10 1xM5/M6
10 mm2
2.55 m
1xM8/M10 1xM5/M6
10 mm2
3.05 m
1xM8/M10 1xM5/M6
If the products are requested to be packed in accordance with the VG standards, this has to be explicitely confirmed when placing the order.
*) BW = Deutsche Bundeswehr
German Federal Armed Forces
198
www.dehn.de
416 025
416 030
416 035
416 040
416 050
416 060
416 070
416 080
416 100
416 120
416 140
416 150
416 200
416 220
416 280
416 300
416 516
417 005
417 010
417 015
417 020
417 030
417 050
417 100
417 115
417 120
417 125
417 130
417 150
416 003
416 005
416 006
416 010
416 015
416 020
416 025
416 030
416 035
416 040
416 050
416 060
416 070
416 080
416 100
416 120
416 140
416 150
416 200
416 220
416 280
416 300
416 516
417 005
417 010
417 015
417 020
417 030
417 050
417 100
417 115
417 120
417 125
417 130
417 150
TELECOMMUNICATIONS
Earth Conductor,
open cable lugs
C Made of highly flexible copper wire, frost-proof
C
D
E
Cable
cross section
Cable
length (l1)
D
E
Open
cable lug
Standard
Colour
PU
pc(s)
BW*
Supply No.
Part
No.
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6150-12-156-9115
6150-12-156-9085
6150-12-156-9116
6150-12-156-9084
6150-12-156-9117
6150-12-156-9118
6150-12-156-9119
6150-12-156-9083
6150-12-156-6208
6150-12-156-8388
6150-12-156-9120
6150-12-156-9082
6150-12-156-9121
6150-12-188-4475
6150-12-156-9122
6150-12-188-4476
6150-12-156-9123
6150-12-161-4273
6150-12-156-9124
6150-12-188-4477
6150-12-188-4478
6150-12-156-9125
416 003
416 005
416 006
416 010
416 015
416 020
416 025
416 030
416 035
416 040
416 050
416 060
416 070
416 080
416 100
416 120
416 140
416 150
416 200
416 220
416 280
416 300
VG 95218
1
1
6150-12-308-6607
416 516
FLYKH
FLYKH
FLYKH
FLYKH
FLYKH
FLYKH
FLYKH
FLYKH
FLYKH
FLYKH
FLYKH
FLYKH
11
11
11
11
11
11
11
11
11
11
11
11
1
1
1
1
1
1
1
1
1
1
1
1
6150-12-313-5059
6150-12-313-5060
6150-12-313-5061
6150-12-313-5062
6150-12-313-5063
6150-12-313-5064
6150-12-313-5065
6150-12-313-5066
6150-12-313-5067
6150-12-185-8587
6150-12-313-5068
6150-12-174-2744
417 005
417 010
417 015
417 020
417 030
417 050
417 100
417 115
417 120
417 125
417 130
417 150
C MODEL
16 mm2
0.35 m
16 mm2
0.55 m
16 mm2
0.65 m
16 mm2
1.05 m
16 mm2
1.55 m
16 mm2
2.05 m
16 mm2
2.55 m
16 mm2
3.05 m
16 mm2
3.55 m
16 mm2
4.05 m
16 mm2
5.05 m
16 mm2
6.05 m
16 mm2
7.05 m
16 mm2
8.05 m
16 mm2
10.05 m
16 mm2
12.05 m
16 mm2
14.05 m
16 mm2
15.05 m
16 mm2
20.05 m
16 mm2
22.05 m
16 mm2
28.05 m
16 mm2
30.03 m
D MODEL
Cable lug, 2x open, 1x M8/M10 and 1x M5/M6
16 mm2
1.55 m
1xM8/M10 1xM5/M6
E MODEL
16 mm2
0.55 m
16 mm2
1.05 m
16 mm2
1.55 m
16 mm2
2.05 m
16 mm2
3.05 m
16 mm2
5.05 m
16 mm2
10.05 m
16 mm2
15.05 m
16 mm2
20.05 m
16 mm2
25.05 m
16 mm2
30.05 m
16 mm2
50.05 m
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
2xM8/M10
www.dehn.de
199
Earth Conductor,
open / closed cable lugs
TELECOMMUNICATIONS
B
A
Cable
cross section
Cable
length (l1)
410 503
410 506
410 510
410 515
410 520
410 525
410 530
410 401
410 403
410 404
410 450
410 406
410 411
410 415
410 420
410 425
410 430
410 413
410 405
410 407
410 410
A
C
Open
cable lug
Closed
cable lug
Hole
Ø
Standard
PU
Colour pc(s)
BW*
Supply No.
Part
No.
A MODEL
B
Cable lug, 1x open M5/M6 and 1x closed M8
10 mm2
0.35 m
M5/M6
10 mm2
0.65 m
M5/M6
10 mm2
1.05 m
M5/M6
10 mm2
1.55 m
M5/M6
10 mm2
2.05 m
M5/M6
10 mm2
2.55 m
M5/M6
10 mm2
3.05 m
M5/M6
M8
M8
M8
M8
M8
M8
M8
8.5 mm
8.5 mm
8.5 mm
8.5 mm
8.5 mm
8.5 mm
8.5 mm
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
1
1
1
1
1
1
1
1
1
1
1
1
1
1
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
8.5 mm
8.5 mm
8.5 mm
8.5 mm
8.5 mm
8.5 mm
8.5 mm
8.5 mm
8.5 mm
8.5 mm
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10 mm2
0.35 m
M8/M10
M10
10.5 mm
VG 95218
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
1
1
1
1
1
1
1
1
1
10 mm2
10 mm2
10 mm2
10 mm2
10 mm2
10 mm2
10 mm2
6150-12-196-7302
6150-12-195-9694
6150-12-196-7304
6150-12-196-7303
6150-12-196-7606
410 503
410 506
410 510
410 515
410 520
410 525
410 530
B MODEL
10 mm2
10 mm2
10 mm2
10 mm2
10 mm2
10 mm2
10 mm2
10 mm2
10 mm2
10 mm2
0.20 m
0.35 m
0.45 m
0.55 m
0.65 m
1.05 m
1.55 m
2.05 m
2.55 m
3.05 m
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
6150-12-195-9490
6150-12-192-5455
6150-12-197-088
6150-12-192-5456
6150-12-192-5457
6150-12-192-5458
6150-12-198-1217
6150-12-198-6803
410 401
410 403
410 404
410 450
410 406
410 411
410 415
410 420
410 425
410 430
C
C MODEL
0.55 m
0.65 m
1.05 m
1.55 m
2.05 m
2.55 m
3.05 m
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M10
M10
M10
M10
M10
M10
M10
1
1
1
1
1
1
1
410 413
6150-12-196-6346
6150-12-198-7027
6150-12-171-2783
6150-12-198-1218
410 405
410 407
410 410
410 416
410 421
410 426
410 431
200
www.dehn.de
410 416
410 421
410 426
410 431
416 505
416 411
416 415
416 420
416 425
416 430
416 440
416 450
416 403
416 410
416 416
416 421
416 426
416 431
416 441
416 451
416 505
416 411
416 415
416 420
416 425
416 430
416 440
416 450
416 403
416 410
416 416
416 421
416 426
416 431
416 441
416 451
TELECOMMUNICATIONS
Earth Conductor,
open / closed cable lugs
D Made of highly flexible copper wire, frost-proof
D
E
Cable
cross section
Cable
length (l1)
Open
cable lug
Closed
cable lug
F
E
Hole
Ø
Standard
PU
Colour pc(s)
BW*
Supply No.
Part
No.
8.5 mm
VG 95218
1
1
6150-12-300-9131
416 505
8.5 mm
8.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6150-12-308-6934
6150-12-308-6981
6150-12-308-6933
6150-12-308-6932
6150-12-308-6931
6150-12-308-6930
6150-12-308-6929
416 411
416 415
416 420
416 425
416 430
416 440
416 450
16 mm2
0.35 m
M8/M10
M10
16 mm2
1.05 m
M8/M10
M10
16 mm2
1.55 m
M8/M10
M10
10.5 mm
10.5 mm
10.5 mm
VG 95218
VG 95218
1
1
1
6150-12-308-6941
6150-12-308-6940
416 403
416 410
416 416
16 mm2
16 mm2
16 mm2
16 mm2
16 mm2
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
1
1
1
1
1
1
1
1
1
1
1
1
1
6150-12-308-6939
6150-12-308-6938
6150-12-308-6937
6150-12-308-6936
6150-12-308-6935
416 421
416 426
416 431
416 441
416 451
D MODEL
16 mm2
0.55 m
M5/M6
M8
E MODEL
16 mm2
1.05 m
M8/M10
M8
16 mm2
1.55 m
M8/M10
M8
16 mm2
2.05 m
M8/M10
M8
16 mm2
2.55 m
M8/M10
M8
16 mm2
3.05 m
M8/M10
M8
16 mm2
4.05 m
M8/M10
M8
16 mm2
5.05 m
M8/M10
M8
F MODEL
F
2.05 m
2.55 m
3.05 m
4.05 m
5.05 m
M8/M10
M8/M10
M8/M10
M8/M10
M8/M10
M10
M10
M10
M10
M10
www.dehn.de
201
Earth Conductor,
closed cable lugs
TELECOMMUNICATIONS
410 903
410 905
410 906
410 910
410 915
410 920
410 925
410 930
416 903
B
A
Cable
cross section
Cable
length (l1)
Closed
cable lug
Hole
Ø
Standard
Colour
PU
pc(s)
BW*
Supply No.
Part
No.
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6150-12-198-1948
Cable lug, 2x closed, cross section 16 mm2
16 mm2
0,35 m
2xM10
16 mm2
0.55 m
2xM10
16 mm2
0.65 m
2xM10
10.5 mm
10.5 mm
10.5 mm
VG 95218
VG 95218
VG 95218
1
1
1
6150-12-198-6812
6150-12-198-6813
6150-12-198-6814
416 903
416 905
416 906
16 mm2
16 mm2
16 mm2
16 mm2
16 mm2
16 mm2
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
VG 95218
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6150-12-168-9942
6150-12-168-2693
416 910
416 915
416 920
416 925
416 930
416 970
A
A MODEL
Cable lug, 2x closed, cross section 10 mm2
10 mm2
0.35 m
2xM10
10 mm2
0.55 m
2xM10
10 mm2
0.65 m
2xM10
10 mm2
1.05 m
2xM10
10 mm2
1.55 m
2xM10
10 mm2
2.05 m
2xM10
10 mm2
2.55 m
2xM10
10 mm2
3.05 m
2xM10
6150-12-198-6810
6150-12-198-1482
6150-12-168-2696
6150-12-168-2695
6150-12-168-2694
410 903
410 905
410 906
410 910
410 915
410 920
410 925
410 930
B MODEL
1.05 m
1.55 m
2.05 m
2.55 m
3.05 m
7.05 m
2xM10
2xM10
2xM10
2xM10
2xM10
2xM10
6150-12-198-1483
6150-12-168-2692
B
202
www.dehn.de
416 905
416 906
416 910
416 915
416 920
416 925
416 930
416 970
410 720
416 016
410 606
TELECOMMUNICATIONS
Earth Conductor,
open/closed cable lugs,
with Plug Connector
A
B
A
B
Cable cross Cable
section
length (l1)
Open Closed
cable lug
Hole
Ø
Plug
connector
PU
Standard Colour pc(s)
BW*
Supply No.
C
Part
No.
A MODEL
Cable lug, 1x open with plug connector, cross section 10 mm2
10 mm2
2.05 m
M8/M10
sz. 10 (d=4.3)
VG 95218
1
1
6150-12-308-6979
410 720
VG 95218
1
1
6150-12-178-9673
416 016
VG 95218
1
1
6150-12-304-4604
410 606
B MODEL
Cable lug, 1x open with plug connector, cross section 16 mm2
16 mm2
1.55 m
M8/M10
sz. 16 (d=5.4)
C MODEL
Cable lug, 1x closed with plug connector, cross section 10 mm2
10 mm2
0.65 m
M8
8.5 mm sz. 10 (d=4.3)
C
www.dehn.de
203
Earthing Cable Lugs
A
Cable
cross section
TELECOMMUNICATIONS
B
C
D
A
444 006
444 010
444 008
B
Cable lug
fit
Material
Designation
PU
pc(s)
BW*
Supply No.
M5/M6
Cu/gal Sn
VG 96 933 T14 A002A
100
5940-12-156-9126
Part
No.
A MODEL
Open
6-16 mm2
444 006
C/D
B MODEL
Open
6-16 mm2
M8/M10
Cu/gal Sn
VG 96 933 T14 A001A
100
5940-12-152-3867
444 010
M8
Cu/gal Sn
VG 96 933 T14 B001A
100
5940-12-156-9128
444 008
M10
Cu/gal Sn
VG 96 933 T14 B002A
100
5940-12-156-9127
444 009
C MODEL
Closed
6-16 mm2
D MODEL
Closed
6-16 mm2
Earth Terminal
435 805
435 803
For connecting earth conductors to pipelines
A
A
B
B
Clamping part
material
Spindle
material
Pipe clamping range
Ø
in mm
Cross-sectional
area
Designation
PU
pc(s)
BW*
Supply No.
Part
No.
A MODEL
Up to 1 †”
MCI/tZn
St/gal Zn
—-1†“
5 - 45 mm
6-16 mm2 VG 96 953 T06 A0001 1
5999-12-156-9129
435 805
St/gal Zn
…-2“
10 - 60 mm
6-16 mm2 VG 96 953 T06 B0001 10 5999-12-156-2656
435 803
B MODEL
Up to 2”
MCI/tZn
204
www.dehn.de
444 009
465 801
466 192
TELECOMMUNICATIONS
Earthing Busbar
With slot and protection against twisting,
for fixing at the earthing pipe
A
B
A
Busbar
material
B
Length
Screw
type
Nut
Screw/Nut
material
wing nut M10
StSt (V2A)
VG 96 953 T07 A0001 1 5940-12-156-8385 465 801
wing nut M10
StSt (V2A)
VG 96 953 T07 B0001 1 5940-12-188-4931 466 192
Designation
PU
pc(s)
BW*
Supply No.
Part
No.
A MODEL
3-pole device
St/tZn
180 mm di M10x35 mm
B MODEL
5-pole device
St/tZn
290 mm di M10x35 mm
634 045
634 060
Pointed Earth Rod
For earthing mobile objects, e.g. vehicles,
power generators etc.
Profile
material Profile
Length
(l1)
Screw
type
Nut
St/tZn 30x30x3 mm 450 mm di M8x40 mm wing nut M8
St/tZn 30x30x3 mm 600 mm di M8x40 mm wing nut M8
Screw/Nut
material
Designation
PU
BW*
pc(s) Supply No.
Part
No.
StSt (V2A) VG 96 953 T10 D0001 1 5975-12-153-8505 634 045
StST (V2A) VG 96 953 T10 D0002 1 5975-12-166-0114 634 060
www.dehn.de
205
Anchoring Pole
TELECOMMUNICATIONS
466 203
For bracing rod parts and lath shears when overbuilding
telecommunication cables etc.
Profile
material
GTW-45-07/tZn
Profile
Length
Design
PU
pc(s)
BW*
Supply No.
25x25x3 mm
405 mm
hole Ø 28 mm
1
4030-12-320-9037
Part
No.
466 203
Earthing Pipe with Impact Tip
646 000
power generators, etc.
Material
St/tZn
Pipe
Ø
Length
Screw
type
Screw
material
Designation
PU
pc(s)
BW*
Supply No.
34 mm
600 mm
wing nut M8
StSt (V2A)
VG 96 953 T10 B0001
1
5975-12-133-4342
Part
No.
646 000
Earthing Pipe with Drilling Spiral
644 000
power generators, etc.; with removable handle
Material
Length
Screw
type
Screw
material
Designation
PU
pc(s)
BW*
Supply No.
St/tZn
1000 mm
di M10x35 mm
StSt (V2A)
TL 5975-013
1
5975-12-120-0006
Part
No.
644 000
206
www.dehn.de
www.dehn.de
207
Legal Notes
Since we do not carry out the design of systems or system
components, the suggested application of our products
should be regarded as product information and for advisory
purposes only. Our oral and written advice on application is
based on experience and given to the best of our knowledge.
However, it must be also considered as not binding. This particularly applies to the different conditions of use which are
beyond our control. We recommend to check whether the
respective DEHN product is suitable for the intended application.
Application, use and processing of our products take place
beyond our control. Therefore, the product is completely subject to the user’s responsibility.
Trademarks
–
–
–
–
–
–
–
–
"BLITZPLANER”
"DEHNALU-DRAHT"
"DEHNgrip"
"DEHNfix"
"DEHNQUICK"
"DEHNsnap"
"HVI"
"...Mit Sicherheit DEHN."
and our logo
are registered trade marks of
DEHN + SÖHNE GMBH + CO.KG
208
www.dehn.de
Standards
DIN Description / DEHN Part No.
48804
48805
Part No.
Page
Issue 3.85
DIN 48804 - St
Lightning protection system DIN 48804 - Cu
Fixing parts for conductors
and components
DIN 48804 - St
DIN 48804 - Cu
DIN 48804 - St
DIN 48804 - Cu
DIN 48804 - St
DIN 48804 - Cu
A1
A1
298 020
298 027
B1
B1
B2
B2
B3
B3
298 008
298 087
299 008
299 087
299 016
299 167
Issue 8.89
DIN 48805 - St
Lightning protection system DIN 48805 - Cu
Rod holders
DIN 48805 -St
D
D
260 106
260 167
100
100
E
262 110
100
DIN 48805 - ZG
DIN 48805 - RG
F
F
275 816
275 817
100
100
A 300
146 309
67
145 241
67
48811
Issue 3.85
DIN 48811
Lightning protection system based on
Roof conductor holders
for thatched roofs
Clamping cap
48812
Issue 3.85
DIN 48812
Lightning protection system
for thatched roofs
Wood pile
48821
Issue 3.85
DIN 48821
Lightning protection system DIN 48821
Number plates
8
16
480 005
480 006
138
138
48827
Issue 3.85
DIN 48827
for thatched roofs
DIN 48827
Eaves support and
tensioning block
1050
1400
239 000
239 001
68
68
B
241 002
68
K
K
275 088
111 033
92
92
P
P
260 108
260 187
93
93
DIN 48828 - St
Q
262 100
100
Issue
DIN 48829
DIN 48829 - St
Conductor holders and
fixing plates for
flat roofs
B
253 015
54 / 80
K
297 015
82
48828
48829
www.dehn.de
Description
on request
DIN
Issue 8.89
DIN 48828 - ZG
Lightning protection system DIN 48828 - RG
Condcutor holders
DIN 48828 - St
DIN 48828 - Cu
48832
Issue 3.85
DIN 48832
Mushroom-type collectors
F
108 001
31
48839
Issue 3.85
DIN 48839
Inspection box and frame DIN 48839
for testing joints
K
549 000
136
R
476 020
137
209
Further Standards
48803
Issue 3.85
Arrangement of components and
dimensions for mounting
48806
Issue 3.85
Terms and definitions for conductors
and components
48810
Issue 2001-09
Spark gap
Requirements, tests
48820
Issue 1.67 / Draft 7.84
Symbols for building parts for
lightning protection in drawings
48830
Issue 3.85
Description
48831
Issue 3.85
Test report
see also Lightning Protection Guide
Conversion Table
Description
Part No.
Solid round conductor St/tZn 8 mm
800 008
1
0.393
1
2.54
Solid round conductor St/tZn 10 mm
800 010
1
0.617
1
1.62
Solid round conductor St/tZn with PVC coating 8 mm
800 108
1
0.440
1
2.30
Solid round conductor St/tZn with PVC coating 10 mm
800 110
1
0.680
1
1.48
840 008 / 840 018 1
840 108
0.135
1
7.40
Solid round conductor Al,
medium-hard/soft 8 mm
Length Approx. Weight Approx.
(m) weight (kg) (kg) length (m)
Solid round conductor Al, medium-hard/soft 10 mm
840 010
1
0.211
1
4.72
Solid round conductor Al with PCV coating,
medium-hard 8 mm
840 118
1
0.175
1
5.70
Solid round conductor StSt V2A / V4A 8 mm
860 008 / 860 908 1
0.395
1
2.54
Solid round conductor StSt V2A / V4A 10 mm
860 010 / 860 020 1
860 910 / 860 920
0.617
1
1.62
Solid round conductor Cu,
medium-hard/soft 8 mm
830 008 / 830 108 1
830 038
0.448
1
2.22
Tape conductor St/tZn 20x2,5 mm Z300/500
810 225 / 801 225 1
0.400
1
2.50
Tape conductor St/tZn 30x3,5 mm Z300/500
810 335 / 852 335 1
801 335 / 825 335
0.840
1
1.19
Tape conductor St/tZn 30x4 mm Z300/500
810 304 / 801 304 1
0.960
1
1.04
810 404 / 801 404 1
1.280
1
0.78
810 405 / 801 405 1
1.600
1
0.63
Tape conductor StSt V2A / V4A 30x3,5 mm
860 335 / 860 325 1
860 900 / 860 925
0.825
1
1.21
0.450
1
2.22
Tape conductor Cu 20x2,5 mm
210
831 225
1
www.dehn.de
Part Nos. / Page Index
www.dehn.de
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
100 100
100 150
20
20
101 000
101 001
101 150
20
51
140
102 002
102 003
102 010
102 050
102 060
102 075
102 152
102 211
102 252
102 340
27
27
27/56
28/56
28
27
20
20
20
27
39
39
46
46
46
40
40
40
39
37/46
38/46
54
56
56
54
55
56
202 832
202 840
202 841
202 842
202 900
202 901
202 902
202 904
202 906
55
55
55
55
72
76
76
77
85
24
24
24
24
24
24
25
25
25
25
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
43/51
43/51
51
51
43/52
44
44
60
57
23/45
45
45
44/52
44/52
44/52
66
66
66
22
42
22
42
42
22
22
22
22
22
22
22
22
106 326
106 327
106 328
106 330
106 331
106 340
106 341
106 342
106 345
106 352
106 353
106 760
106 812
106 813
106 816
106 898
106 899
103 121
103 122
103 123
103 124
103 125
103 126
103 127
103 128
103 129
103 130
103 210
103 211
103 220
103 221
103 230
103 231
103 240
103 241
103 250
103 251
103 260
103 261
103 280
103 410
103 420
103 430
103 440
103 450
103 460
103 480
105 301
105 302
105 306
105 310
105 340
105 341
105 342
105 345
105 350
105 354
105 355
105 356
105 360
105 361
105 362
105 363
105 364
105 365
105 400
105 440
105 450
105 455
105 470
105 500
105 550
105 600
105 650
105 700
105 750
105 800
105 850
108 001
31
110 000
110 017
31
31
111 033
111 039
92
98
123 021
123 031
123 109
26
26
21
67
67
200 027
200 029
200 057
200 059
200 067
200 069
200 077
200 079
200 087
200 089
200 600
200 601
97
97
97
97
97
97
97
97
97
97
103/179
103/179
207 009
207 019
207 029
207 039
207 109
89
89
89
89
89
216 000
216 007
73
73
201 160
73
20
20
20
20
20
20
20
20
20/140
20/140
20/140
95
95
76
85
76
76
85
76
72
72
72
82
76
76
77
77
82
77
77
95
72
55
55
77
30
83
83
83
83
83
83
83
83
239 000
239 001
239 009
239 019
68
68
68
68
240 000
68
241 002
241 009
68
68
43
43
23
23
46
23
23
23
23
23
43/51
202 000
202 001
202 003
202 005
202 008
202 010
202 015
202 017
202 020
202 021
202 027
202 030
202 037
202 040
202 050
202 057
202 060
202 080
202 087
202 169
202 227
202 830
202 831
223 000
223 005
223 010
223 011
223 020
223 021
223 031
223 040
223 041
223 070
105 071
105 079
105 140
105 160
105 200
105 202
105 203
105 214
105 215
105 216
105 300
30
34
34
34
34
34
34
45
34
36
36
36/59
34
34
36
36
36
36
36
36
35
35
35
35
35
35
35
35
35
37
37
37
38/45
37
37
38
38/59
38/59
39
39
146 309
104 100
104 107
104 150
104 157
104 200
104 250
104 300
104 600
104 903
104 905
104 906
106 008
106 090
106 100
106 105
106 110
106 115
106 120
106 121
106 123
106 125
106 126
106 127
106 150
106 160
106 165
106 170
106 175
106 178
106 180
106 185
106 225
106 226
106 228
106 235
106 236
106 238
106 245
106 246
106 248
106 301
106 310
106 311
106 312
106 315
106 316
106 321
106 322
106 323
106 324
106 325
88
88
88
88
88
88
88
88
73
88
73
78
88
78
78
78
74
74
72
72
88
72
72
74
74
74
74
74
74
74
74
74
74
74
74
74
74
79
79
72
72
72
72
77
77
85
72
72
85
74
74
74
74
74
74
79
79
79
79
74
74
74
74
74
74
74
74
72
72
72
72
74
74
74
85
79
77
77
79
78
78
75
75
75
75
72
72
72
72
145 241
204 001
204 002
204 003
204 004
204 006
204 007
204 017
204 027
204 029
204 037
204 039
204 049
204 057
204 059
204 069
204 079
204 088
204 089
204 107
204 109
204 120
204 127
204 129
204 147
204 149
204 157
204 159
204 167
204 169
204 170
204 171
204 177
204 179
204 187
204 189
204 197
204 199
204 229
204 239
204 247
204 249
204 267
204 269
204 357
204 359
204 906
204 911
204 913
204 916
204 921
204 922
204 923
204 924
204 925
204 926
204 935
204 936
204 937
204 938
206 170
206 171
206 207
206 209
206 217
206 219
206 227
206 229
206 237
206 239
206 247
206 249
206 309
206 319
206 329
206 339
206 349
206 357
206 359
206 369
206 389
206 399
206 507
206 509
206 607
206 609
206 807
206 809
206 817
206 819
250 000
250 001
250 007
250 010
250 011
250 017
250 100
250 101
250 107
90
90
90
90
90
90
90
90
90
206 105
206 109
85
72
251 002
118
211
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
251 027
118
110
110
102
102
102
306 020
306 100
306 101
110
110
110
253 015
253 021
253 023
253 025
253 026
253 027
253 030
253 050
253 051
253 060
54/80
81
81
81
55
55
80
80
80
80
307 000
307 007
110
110
377 007
377 015
377 016
377 017
377 026
377 027
377 045
377 100
377 107
377 115
377 210
377 220
377 310
377 320
377 410
377 420
377 510
377 520
129
129
127
117
127
127
129
117
129
129
128
128
128
128
128
128
128
128
343 000
343 007
120
120
276 000
276 006
276 007
276 009
276 056
276 057
95
95
95
95
15
15
345 008
345 010
345 087
121
121
121
380 020
380 027
380 029
121
121
121
347 201
121
277 130
277 230
277 237
277 239
171
99/170
99/170
99/170
151
151
150
150
150
107/150
107/150
152
114
114
150
150
151
114
114
114
114
114
114
114
114
119
119
119
119
119
119
120
120
120
120
120
120
120
120
124
124
124
100
93
93
96
100
93
93
100
100
93
100
93
93
308 001
308 010
308 025
308 026
308 030
308 040
308 041
308 050
308 060
308 070
308 120
308 129
308 150
308 220
308 229
308 230
308 239
308 320
308 329
308 330
308 339
339 050
339 057
339 059
339 060
339 067
339 069
339 100
339 101
339 107
339 109
339 110
339 111
339 117
339 119
339 150
339 157
339 167
260 106
260 108
260 109
260 118
260 156
260 157
260 158
260 167
260 177
260 187
260 706
260 708
260 787
101
54
54
54
58
58
58
56
57
100
98
100
100
100
54
54
98
100
100
305 000
305 007
252 000
252 007
252 009
275 260
275 320
275 330
275 333
275 420
275 430
275 499
275 520
275 521
275 616
275 630
275 816
275 817
275 819
275 820
275 823
275 830
275 916
275 919
363 000
363 001
363 010
143
143
143
385 202
385 203
385 207
385 213
385 216
111
111
111
111
21/111
262 070
262 100
262 109
262 110
262 119
262 130
93
93
93
100
100
93
284 030
284 040
98
98
309 008
309 087
111
111
109
109
93
273 010
273 019
273 110
273 606
273 608
273 687
273 730
273 731
273 737
273 740
273 741
273 742
273 743
92
94
92
100
92
92
101
101
101
94
94
94
94
98
98
98
98
92
92
310 008
310 087
263 118
286 030
286 040
286 139
286 230
286 800
286 819
314 300
314 307
314 310
112/172
112/172
112/172
288 030
98
315 115
109
290 001
290 002
149
149
316 163
316 167
112
112
297 015
297 025
297 110
297 117
297 120
297 127
297 199
82
82
84
84
84
84
84
318 033
318 201
318 207
318 209
318 233
318 251
318 252
113
113
113
113
113
113
113
365 000
365 007
365 010
365 017
365 019
365 020
365 027
365 030
365 031
365 037
365 039
365 040
365 047
365 050
365 051
365 057
365 059
365 117
365 127
365 220
365 221
365 227
365 229
118
118
118
118
118
118
118
118
118
118
118
118
118
117
117
117
83/117
123
123
117
117
117
117
275 010
275 016
275 019
275 030
275 068
275 088
275 110
275 113
275 116
275 120
275 129
275 130
275 160
275 188
275 220
275 225
275 229
275 230
36
36
102
99
92
92
91
91
101
53
63
92
91
92
53/63
53
53/63
99
390 050
390 051
390 057
390 059
390 060
390 061
390 067
390 110
390 117
390 119
390 150
390 157
390 159
390 250
390 257
390 259
390 267
390 450
390 459
390 479
390 489
390 550
390 551
390 557
390 559
390 657
106
106
106
106
106
106
106
95
95
95
107
107
107
107
107
107
123
143
143
143
143
106
106
106
106
122
300 000
300 002
300 007
300 017
108
108
108
108
115
115
108
108
108
108
108
53/108
52
53
113
113
113
113
113
113
370 014
370 018
301 000
301 007
301 009
301 010
301 017
301 019
301 229
301 239
319 201
319 202
319 207
319 209
319 219
319 229
371 007
371 008
371 009
115
115
115
391 050
391 059
391 060
391 069
391 550
391 559
106
106
106
106
106
106
320 044
113
321 045
321 047
113
113
372 018
372 019
372 035
372 039
116
116
116
116
374 011
374 020
127
127
108
108
108
119
119
119
119
119
106/122
106/122
106/122
106/122
106/122
302 000
302 007
302 010
338 000
338 001
338 007
338 009
339 010
392 050
392 057
392 059
392 060
392 069
393 069
40
377 005
377 006
117
127
405 020
53
212
www.dehn.de
www.dehn.de
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
407 012
407 034
407 100
407 112
407 114
407 200
165
165
165
165
165
165
416 905
416 906
416 910
416 915
416 920
416 925
416 930
416 970
202
202
202
202
202
202
202
202
133
133
133
133
133
133
133
165
165
165
165
165
165
165
199
199
199
199
199
199
199
199
199
199
199
199
460 117
460 147
460 213
460 214
460 507
460 517
460 557
125
125
134
134
124
124
124
138
140
140
140
140
140
139
139
139
139
139
139
164
164
164
164
164
164
417 005
417 010
417 015
417 020
417 030
417 050
417 100
417 115
417 120
417 125
417 130
417 150
480 006
480 018
480 019
480 020
480 021
480 022
480 110
480 113
480 114
480 150
480 157
480 175
409 007
409 107
409 127
409 147
409 347
409 387
463 010
134
483 100
483 125
483 150
483 200
20
20
20/140
20/140
465 801
205
528 850
528 870
179
179
410 003
410 005
410 006
410 010
410 012
410 015
410 020
410 025
410 030
410 034
410 035
410 038
410 040
410 050
410 060
410 070
410 099
410 100
410 112
410 114
410 134
410 140
410 150
410 199
410 200
410 212
410 299
410 300
410 309
410 319
410 329
410 339
410 349
410 359
410 369
410 379
410 389
410 399
410 401
410 403
410 404
410 405
410 406
410 407
410 410
410 411
410 413
410 415
410 416
410 420
198
198
198
198
165
198
198
198
198
165
198
165
198
198
198
198
198
165
165
165
165
198
198
198
165
165/168
198
165/168
165
165
165
165
165
165
165
165
165
165
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
198
198
203
198
198
198
198
198
203
202
202
202
202
202
202
202
202
459 020
459 029
459 030
459 039
459 119
459 129
459 139
408 012
408 014
408 034
408 038
408 100
408 112
408 114
410 421
410 425
410 426
410 430
410 431
410 450
410 503
410 506
410 510
410 515
410 520
410 525
410 530
410 603
410 605
410 606
410 610
410 615
410 620
410 625
410 630
410 720
410 903
410 905
410 906
410 910
410 915
410 920
410 925
410 930
420 100
420 107
420 120
420 127
420 207
167
167
167
167
125
466 192
466 203
472 000
205
206
159
538 010
538 030
96
96
416 003
416 005
416 006
416 010
416 015
416 016
416 020
416 025
416 030
416 035
416 040
416 050
416 060
416 070
416 080
416 100
416 120
416 140
416 150
416 200
416 220
416 280
416 300
416 403
416 410
416 411
416 415
416 416
416 420
416 421
416 425
416 426
416 430
416 431
416 440
416 441
416 450
416 451
416 505
416 516
416 903
199
199
199
199
199
203
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
199
202
423 010
423 011
423 017
423 019
423 020
423 021
423 027
423 029
423 200
423 207
423 209
167
167
167
167
167
167
167
167
167
167
167
425 076
425 089
97
97
435 803
435 805
204
204
439 000
439 016
169
169
472 021
472 022
472 023
472 024
472 109
472 119
472 129
472 139
472 201
472 207
472 209
472 210
472 217
472 219
472 227
472 229
472 237
472 239
472 257
472 269
472 279
472 289
472 299
162
162
162
162
162
162
162
162
161
160
160
161
160
160
160
160
160
160
160
161
161
161
161
444 006
444 008
444 009
444 010
204
204
204
204
476 001
476 010
476 020
137
136
137
450 000
450 001
450 007
450 011
450 101
132
132
132
132
132
453 100
135
454 000
454 100
454 107
135
135
135
478 011
478 012
478 019
478 041
478 049
478 141
478 200
478 241
478 249
478 310
478 320
478 330
478 340
142
142
142
142
142
144
142
142
142
144
144
144
144
455 000
459 000
135
133
479 150
479 157
140
140
459 003
459 010
459 019
133
133
133
480 003
480 004
480 005
138
138
138
540 001
163
540 002
163
540 100
166
540 103
166
540 110
166
540 200
166
540 900
163
540 901 39/163/166
540 910
163
540 911
163
540 912
163
540 930
97
540 931
97
545 000
185
546 000
546 001
546 002
546 025
168
168
168
168
549 000
549 001
549 100
136
136
136
552 010
552 020
552 030
32
93
32
554 011
178
556 125
556 130
178
178
559 010
559 011
178
178
562 001
562 035
562 050
562 101
562 135
562 150
562 250
562 440
562 460
126
126
126
126
126
126
126
126
126
563 010
157
213
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
563 011
563 012
563 013
563 014
563 015
563 016
563 017
563 018
563 019
563 020
563 030
563 050
563 103
563 105
563 169
563 200
563 201
563 222
158
158
158
158
158
158
158
158
158
157
157
156
159
159
171
156
156
156
589 000
184
16
16
175
840 050
840 108
840 118
18
14
14
596 000
175
600 003
600 029
600 035
600 050
176
176
176
176
610 010
610 020
147
147
630 120
630 129
630 130
630 139
147
147
147
147
572 000
175
619 157
146
634 002
634 045
634 060
149
205
205
49
49
49
49
49
49
50
50
50
50
50
50
50
50
50
60
60
16
174
174
174
174
819 020
819 021
819 022
819 023
819 024
819 025
819 320
819 321
819 322
819 323
819 324
819 325
819 360
819 361
819 362
819 720
819 750
852 335
597 003
597 004
597 005
597 006
177
177
177
148
148
148
177
148
177
146
146
146
810 404
810 405
595 000
625 005
625 007
625 008
625 011
625 012
625 015
625 019
625 021
625 029
625 101
625 150
625 151
573 000
153
620 001
620 002
620 005
620 007
620 008
620 011
620 012
620 015
620 017
620 019
620 021
620 029
620 101
620 150
620 151
620 902
620 915
146
177
177
177
177
148
148
148
148
177
148
177
146
146
146
146
148
635 100
635 150
635 200
635 250
149
149
149
149
830 008
830 038
830 108
830 208
830 218
14
14
14
62
62
860 008
860 010
860 020
860 115
860 115
860 130
860 130
860 215
860 215
860 230
860 230
860 325
860 335
860 900
860 908
860 910
860 920
860 925
14
14
14
141
17
141
17
141
17
141
17
16
16
16
14
14
14
16
644 000
206
831 225
16
910 001
910 007
920 000
186
186
188
646 000
206
800 008
800 010
800 108
800 110
14
14
14
14
801 050
18
832 095
832 192
832 193
832 292
832 295
832 739
832 740
832 839
18
18
18
18
18
18
18
18
146
177
16
16
16
840 008
840 010
840 018
14
14
14
191/194
191/194
192
189
194
194
194
191
194
195
625 001
625 002
810 225
810 304
810 335
923 011
923 016
923 019
923 023
923 026
923 036
923 046
923 060
923 070
923 071
578 110
578 340
578 350
578 360
578 370
180
181
181
180
182
582 600
582 620
183
182
585 010
585 025
585 050
585 200
585 210
184
184
184
185
185
587 460
184
588 000
214
184
www.dehn.de
General Terms of Sale
1. General, Scope
1.1 All deliveries and services in business dealings with entrepreneurs take place eclusively under our general terms
of sale (hereinafter “terms of sale”). We oppose deviating regulations, especially conflicting terms of purchase
of the customer, unless we epressly agreed to the validity in writing. Our terms of sale apply even if we complete unconditional delivery to the customer while knowing
that the terms of sale of the customer are in conflict with
our own.
1.2 Our terms of sale apply to current business relationships
and to all future transactions with the customer.
1.3 Collateral agreements must be made in writing.
6.
2.
6.2
2.1
2.2
2.3
2.4
2.5
Offer and Order, Reservation of Right of Modification and Copyright
Insofar as not epressly indicated by us as binding, documents such as diagrams, drawings, and measurements
are only roughly binding.
Should our order confirmation contain reasonable epansions, limitations, or other modifications with respect to
the order, then the customer’s agreement is implied, if it
does not immediately, at the latest however within 3
business days from receipt of the order confirmation,
oppose it.
Our goods are only delivered in the packaging units indicated in the catalogs. If a different number of items is
ordered, the amount and price of the net larger packaging unit is considered agreed upon.
We reserve the right to make technical modifications to
our services, insofar as such modifications promote technical progress or are unavoidable based on other circumstances and are reasonable for the customer.
We reserve ownership and copyright rights to diagrams,
drawings, calculations, and other documents; these may
not be made available to third parties without our epress
written consent.
3. Prices, Value-Added Ta, Packaging Costs
3.1 Our prices are subject to change without notice.
3.2 Prices include, insofar as nothing else is arranged, customary packaging from our plant without value-added ta.
On the day of invoicing, the legally identified VAT amount is to be reimbursed to us.
3.3 The cost of non-customary packaging, e.g., collective or
seaworthy packaging, is invoiced separately. The customer bears the cost of the disposal or return of packaging.
4.
Passing of Risk, Optional Insurance
The risk of accidental loss, destruction, or deterioration
passes to the customer upon dispatch to the customer
from our plant, even if carriage-paid delivery is agreed
upon. At the request and epense of the customer, we will
insure the delivery against breakage, damage to goods in
transit, and fire damage.
5.
Payment Due Dates, Discounts, Right of Refusal,
Default, Small Order Quantity Surcharge
Unless otherwise agreed, invoices are payable net 10
days. Purchaser shall pay the costs of payment. Discount
amounts are deductible only if they have been agreed on
with us and all accounts payable due have been paid.
If purchaser is in default with his payments, interest on
the outstanding amount shall be payable at the rate of
8% above the base interest rate. We reserve the right to
prove and allege higher default damages. We reserve the
right to cause default by demanding early payment. If we
are required to advance performance and, if after the
execution of the contract, it becomes apparent that our
claim, in particular for payment, may be jeopardized by
purchaser´s inability to perform we may refuse performance.
The customer cannot charge counter-claims against our
due payment claims or eercise a right of retention, unless
the customer is entitled to a claim recognized by declaratory judgment that is not contested by us and if, while
eercising the right of retention, the counter-claim from
the customer is based on the same contractual relationship.
Orders, with the eception of cash sales, for which the net
amount (invoiced amount without shipping costs and
value-added ta) is less than € 75.00, a small order
surcharge of € 25.00 will be charged.
5.1
5.2
5.3
5.4
www.dehn.de
6.1
6.3
6.4
Retention of Title, Assignment, Release of
Securities
Delivered goods remain our property until the payment
of all open business claims up to the point of invoicing.
The claims of the customer including value-added ta
from the resale of reserved goods, i.e., from a work performance using our goods, should already be transferred
to us in the amount of the open invoice. In the case that
the reserved goods from the customer are sold together
with other goods that do not belong to us, whether it be
without or after processing, or are delivered within the
framework of a working contract, the assignment of the
resulting claim of the reserve buyer is calculated in the
amount of the value of the reserved goods.
Should the value of the granted securities eceed the
claims by more than 20%, we are obliged to retransfer or
release the securities upon request. We shall select the
securities to be released.
Our goods may only be transferred within the framework
of proper business activity. The customer is not allowed
to pawn or transfer the ownership of goods that are still
in our possession.
At our request, the customer is obliged to inform us of
the purchaser and the arranged price and to show the
assignment to its debtor.
7. Delivery Period and Appointment
7.1 The start of the delivery period presupposes the involvement of the customer for the clarification of all technical
questions.
7.2 Delivery periods as well as delivery schedules will be
appropriately etended if they cannot be adhered to as a
result of military mobilization, war, uprising, strike or
lockout, delayed delivery of raw and auiliary materials,
late delivery by our suppliers, or similar circumstances
beyond our control. A lasting obstruction under these circumstances gives us the right to withdraw from the contract without liability for damages.
8. Liability for Material and Title Defects
8.1 Insofar as there eists a defect of the contract subject that
was beyond our control, we can choose to fi the defect
or provide a defect-free contract subject (replacement).
8.2 Should the replacement (No. 8.1) not function properly,
or should it be unreasonable to the customer, or should
we seriously and conclusively refuse it or unreasonably
delay it, or if other circumstances eist that, upon weighing mutual interests, justify immediate resignation or
compensation, then the customer is entitled to choose to
lower the contract price or to withdraw from the contract
(No. 8.3) or demand compensation (No. 8.4). The customer is not entitled to withdraw from the contract if only
insignificant contract inconformities eist, especially insignificant defects.
8.3 Insofar as the customer declares its withdrawal from the
contract due to material or title defects after proper
replacement (No. 8.2), it cannot also claim damages for
the defect.
8.4 Insofar as the customer declares its withdrawal from the
contract due to material or title defects after proper
replacement (No. 8.2), it cannot also claim damages for
the defect.
8.5 Material and title defect claims, including claims for compensation due to material and title defects, with the
eception of claims under the Product Liability Act, lapse
12 months after delivery of the goods.
8.6 Numbers 8.1 through 8.5 do not impair the customer’s
rights if we maliciously concealed a defect or if we offered a quality guarantee.
9.3 Insofar as our liability is ecluded or limited, this also
applies for the personal liability of all of our employees,
representatives, and vicarious agents.
9.4 Our liability is unrestricted if the customer loses his/her
life or suffers a bodily or health injury due to an action or
failure attributable to us.
10. Return of Goods without Legal Liability
10.1 If no legal claim to return eists, delivered goods will be
accepted only with previous written agreement from us
as well as the issuance of a return number. Returns without a return number will be send back – postage-due –
to the sender without inspection. The customer bears the
shipping costs for the return delivery in No. 10.1.
10.2 The goods must still be in their original packaging.
Special orders or deliveries, which date back more than
three months or the net value of which is less than
€ 75.00, cannot be returned. A processing fee of 15% of
the net value of the goods will be charged to cover the
cost of the return. If the goods can no longer be resold at
the list price at the time of the return, an additional
deduction (old goods deduction) will be made in addition to the processing fee. If we make an eception and
agree to accept the return of parts that are unpackaged
or that are no longer in their original packaging, an epense remuneration of at least 15% will be charged for
reworking and repackaging in addition to the processing
fee and, if applicable, the old goods deduction.
10.3 Returned goods will only be credited to a new invoice.
Credits cannot be used to clear invoices due at the time
of the return.
11. Product Information, No Advisory Obligation
Our deliveries are intended only for specialty stores or
skilled users. Our user information and instructions are
limited to the details of each written product information (e.g., installation instructions, catalogs, data sheets).
Further advisory obligations do not eist. Application, use,
and processing of the products lie solely in the customer’s
realm of responsibility.
12. Use and Protection of Customer Data
We use customer data, which concern the business dealings with the customer, in terms of the Federal Data
Protection Act.
13. Applicable Law, Jurisdiction
13.1 German law applies to the mutual contractual obligations, their materialization, interpretation, and implementation as well as all resulting contractual and business
relationships. The application of the UN Agreement on
Contracts on the International Purchase of Goods and
the thereafter-enacted laws of the Federal Republic of
Germany is ecluded.
13.2 Place of performance and jurisdiction for delivery, payment, and for all obligations, including those from echange and check payments, is eclusively Nuremberg. We
reserve the right to file a complaint against the customer
at its official location.
14. VAT Identification Number
VAT ID No. DE 133251475
DEHN + SÖHNE GmbH + Co. KG.
Nürnberg – Neumarkt
Update October 2005
9. Liability for Other Reasons
9.1 Our liability is ecluded for slightly negligent infringement
of immaterial contractual obligations. Our liability is limited to the contractual, foreseeable damages for slightly
negligent infringement of other obligations.
9.2 The above regulation does not apply to claims under the
Product Liability Act. Insofar as the limitation on liability
pursuant to No. 9.1 for claims from the producer’s liability pursuant to § 823 of the German Civil Code does not
interfere, our liability is limited to the replacement of the
insurance. Insofar as this does not occur or does not
occur in full, we are liable up to the insured amount.
215
Key Words
Product
Page
Adapter for Air Termination Rods
30
Air Termination Systems and
Accessories
19-70
Air Termination Tips
31
with HVI® Conductor
60
Air-Termination Rods
20/23/26
Air-termination Rods for Ridge
and Hip Tiles
21
Anchoring Pole
206
Anticorrosive Bands
178
Bimetal Downpipe Clamps
Bimetal Gutter Clamps
Bimetal Isolating Clamps
with Shield
Bimetal MMV Terminals
Bimetal MV Terminals
Bimetal Saddle Clamps
Bridging Brackets
Bridging Braids
Bridging Cable
Bridging Cables
Bushing for Roofs, Walls and
Earthing Electrodes
125
124
125
123
122
123
127
129
169
128
144
Equipment
183
Clamp for Eaves Gutters
120
Clamps / Bimetal Components 105-130
Clamp-type Sockets
121
with thatched Roofs
67
Concrete Bases
27
Conductor Holder
171
Conductor Holder for CUI Conductor 63
Conductor Holder for HVI®
Conductor in explosive Zones
58
Conductor Holders
87-104
Conductors
13-18
Connecting / Disconnecting
Clamps
135
Connecting Clamps
150
Connecting Clamps
148
Connecting Sleeve for
21
Connecting Sleeves
111
Connecting Terminals
144
Continuity Tester
182
Cross Units
112-113/172
Cupal Sheets
126
Cupal Sleeves
126
CUI Leitung
DEHNiso Combi
DEHNIT
Disconnecting Sleeves
Distance Holder
Distance Holder for Omnidirectional Antennas
216
47-57
61-62
41-46
33-40
153
132
149
66
Product
Downpipe Clamps
Driving Heads
Page
103/179
167
177
Earth Conductors
198-203
Earth Resistance Meter
180-181
Earth Rods
146
Earth Terminal
204
Earth Test Tongs
180
Earthing Busbars
162/205
Earthing Cable Lugs
204
Earthing Electrodes
145-154
Earthing Material for
Telecommunications
197-206
163-165
Earthing Pipe with Drilling Spiral 206
Earthing Pipe with Impact Tip
206
Earthing Tongs
168
155-172
156-160
ES Connectors
111
ES Disconnecting Clamps
134
EST Connector
109
193
EXFS L / EXFS KU
190
Expansion Strap for
Foundation Earthing Electrodes 151
Expansion Straps
152
Expansion Units
127
FIX Test Joints
Fixed Earthing Terminals
Flat Washer
135
142
28
Gutter Board Clamps
Gutter Clamps
120
119
Hammer Frames
Hammer Guiding Rider
Hammer Inserts
Heat-shrinkable Sleeves
HVI® Conductor
176
176
177
178
49/50
Impact Tips
146
Inspection Doors
137
Isolated Air-termination Systems
for Omnidirectional Antennas 64/65
187-196
KS Connector
108
Lead-in Earthing Rods
Leather Case with Measuring
Accessories
Lightning Current Counter
140
MAXI MV Terminals
MMV Terminals
Mushroom-type Collectors
MV Terminal for Air Termination
Rods
182
186
107
107
31
122
Product
Page
MV Terminals
106
Number Plates
138
ÖN Disconnecting Clamps
134
Parallel Connector
Pipe Clamps
Pipe Earthing Clamps
Pointed Earth Rod
Profiled Earth Rod
Protective Spark Gaps
110
166/168
169
205
149
188
Rod Clamps
Rod Holder for Gable Roofs
Rod Holders
Roof Bushings
121
30
100-102
32
71-86
Saddle Clamps
117/118
Sealing Units
143
Self-supporting Air-termination Rods 22
Set of Lead-in Earthing Rods
139
Single-Screw Terminals
147
Sleeve for Use as Edge for
Dripping Water
15
Solid Round Conductors
14
Special Coating Paint
178
Spider Wrench
175
Straightening Iron Element
175
Stranded Conductors
18
Support for D40 Air-termination
Rods
23
170
Support for VDB Test Badge
139
SV Terminals
114
SVP Terminals
114
Tape Conductor Holders
98-99
Tape Conductors
16
Telescopic Lightning Protection
Masts
24/25
Terminal Brackets
117
Terminal Lugs (set)
17/141
Terminals
115/116/147/171
Test Joints / Fixed Earthing
Terminals
131-144
173-186
UF Inspection Housings
UNI Bimetal Isolating Clamps
UNI Disconnecting Clamps
Universal Connector
136
124
133
109
Variable Supports for
Variants of Clamping Frames
60
107
Wedge Connector
Wire Straighteners
Wood Screws
151
174
179
www.dehn.de
Surge Protection
Safety Equipment
DEHN + SÖHNE
GmbH + Co.KG.
Hans-Dehn-Str. 1
P.O.Box 1640
92306 Neumarkt
Germany
DS427/E/0107
© Copyright 2007 DEHN + SÖHNE
Tel. +49 9181 906-0
Fax +49 9181 906-444
www.dehn.de
[email protected]

Lightning Protection

Transcription

Similar documents

Resume - Encompass Arts

4c 70 - club de relojeria

Around the world

compact grip - Gerardi SPA

brochure MACCHINARI A CORREDO

SOLLEVATORE SEMI ELETTRICO SERIE SARA

Press Kit - Palmusic

enclosure 1