Canopy Hoods - HEMCO Corporation

Canopy Hoods Fiberglass Composite
Canopy Hoods are designed to collect and exhaust corrosive vapors, heat, steam and odors
when mounted over areas with water baths, hot plates or portable equipment.
Manufactured from chemical resistant
composite materials, Canopy hoods are
lightweight and can be wall-mounted or
suspended from the ceiling over island
locations. Color silver beige
The Canopy Fume Hood’s glass smooth
surfaces provide superior chemical,
corrosion and heat resistance. Uniflow
technology provides uniform air flow
with less turbulence.
Optional side panels prevent cross drafts and
further improve airflow while providing a way
to contain chemical spills.
Wall Canopy Hoods
A
Island Canopy Hoods
A
Outlet Diameter
Outlet Diameter
18”
30”
18”
B
Optional
Side Wall
Panel (1)
specify
left or right
Cat. No. 23000
Top View
Optional
Side Wall
Panel (1)
specify
left or right
Cat. No. 23004
Top View
Table & Phenolic Worksurface
Rear Wall Panel (consult factory for details)
Suspended Island Canopy Hood Mounting Kit Includes
all components to secure to ceiling including 4’ long threaded rods
Cat. No. 23001
Side Wall Panel (fiberglass or stainless steel) kit includes one
wall panel and hardware
Rear Wall Panel (consult factory for details)
Vapor Proof Light & Switch Cat. No. 50035
Vapor Proof Light & Switch Cat. No. 50035
Blower Switch Cat. No. 50028 (blower not included)
Blower Switch Cat. No. 50028 (blower not included)
Side Wall Panels (fiberglass or stainless steel)
36” h X 29” w, includes left & right sides,directs fumes
into canopy hood
Cat. No. 23000
Width A
36”
48”
72”
96”
Width A
36”
48”
72”
96”
Side Wall Panels
Depth B
24”
30”
30”
30”
Side Wall Panels
Fiberglass
13030
13040
13060
13080
23000
Fiberglass
23030
23040
23060
23080
23000
Stainless Steel
13130
13140
13160
13180
23011
Stainless Steel
23130
23140
23160
23180
23011
Diameter D
6”
8”
10”
(2) 10”
---
Diameter D
6”
8”
10”
(2) 10”
---
Canopy Hood Accessories
Vapor Proof light fixture. Factory wired with switch and junction box. All components are U.L. listed.
Heavy Duty Vinyl Canopy Walls reduce cross drafts and turbulence that hamper hood efficiency.
Available in solid curtains or strips.
HEMCO Corporation
711 S. Powell Road
Independence, MO 64056
HEMCO
R
Lab Planning Solutions
Cat. No. 50035
Cat. No. 23007
Cat. No. 23008
Phone (816) 796-2900
Fax (816) 796-3333
CANH-04.16
Canopy Hoods Fiberglass Composite
Corner Canopy Hoods fit into corners to optimize your work area or space, for collection and
exhaust of corrosive vapors, heat, steam, and odors when mounted above areas with hot plates,
portable equipment, or water bathes.
Corner Canopy Hood & Wall mounting kit
Molded one piece seamless, of chemical
resistant lightweight nonmetallic composite
resin. Includes all components to secure
the canopy hood to a wall
Cat. No. 13000
• Corner Composite Resin Work surface
comes dished to contain spillage
Color: Silver Beige
Cat. No. 13503
•Corner Table features welded steel
construction, with chemical resistant
powder coat finish
Cat. No. 13502
Corner Canopy Hoods fiberglass composite
Side Wall Panel (fiberglass) 36” h X 25” w, kit includes
one wall panel and hardware Cat. No. 23004
44.5”
10” Outlet
Diameter
44.5”
Top View
left side
18”
right
25.5”
side
Optional
Side Wall
Panel (1)
specify
left or right
Cat. No. 23004
25.5”
Vapor Proof Light & Switch Cat. No. 50035
Blower Switch (blower not included) Cat. No. 50028
Corner Composite Resin Worksurface
Comes dished to contain spillage. Cat. No. 13503
Corner Canopy (includes mounting kit, to install
canopy to two adjacent walls) Cat. No. 13000
HEMCO Corporation
711 S. Powell Road
Independence, MO 64056
Rear Wall Panel (consult factory for details)
Corner Table Features welded steel construction.
Cat. No. 13502
HEMCO
R
Lab Planning Solutions
Phone (816) 796-2900
Fax (816) 796-3333
CANH-04.16