horizontal mailboxes vertical mailboxes

The Name
To Know In
Postal
Specialties
Bommer Industries, Inc.
Approved by the U.S. Postal Service For USPS-STD-4B+
USPS-STD-4B+ mandatory date was: April 1st , 2005 on
any new construction until October 5th, 2006.
After October 5th, STD-4B+ may only be used for repair
or replacement … unless major building renovation costs
involving the mailboxes triggers requirements under
STD-4C.
USPS-STD-4C mandatory date: October 6th, 2006 for
any and all new construction from this date forward (it
does not mean however, that all existing mailboxes are
required to be replaced with STD-4C units on or before
this date).
HORIZONTAL MAILBOXES
VERTICAL MAILBOXES
6200 & 6300 Series
6001 & 6101 Series
9040 Series
U.S.P.S. & Canada Approved
Not U.S.P.S. & Canada Approved
U.S.P.S. & Canada Approved
DI
SC
REAR LOADING 6300 SERIES
Access to compartments is from the rear. A lift
off rear cover is supplied as standard with an
optional hinged rear cover available. The rear
cover may be omitted on non-U.S.P.S. installations. All doors are usable for mail distribution.
MODEL 6310
The 6310 is composed of all size "A" doors.
HS6310 has a 4-point locking system.
NU
ED
TI
ON
MODEL 6230
The 6230 is the same as the 6210 except it
contains one or more multiple size doors. A
layout must accompany all orders. HS6230
has a 4-point locking system.
SPECIFICATIONS
COMPARTMENT SIZE
• 5" high x 3 1/2" wide x 15" deep (standard)
DOOR LOCK
• 5-pin cam type with 2 keys (standard)
• Optional locks
SC
TI
ON
MODEL 6210
The 6210 is composed of all size "A" doors.
HS 6210 has a 4-point locking system.
FRONT LOADING 6001 SERIES
REAR LOADING 6101 SERIES
These models are particularly suited for private
distribution, such as campus post offices, military installations, hospitals and other installations where mail is handled internally.
DOOR IDENTIFICATION
• 5/8" x 2" number slot, with plastic window
(standard)
• Optional Identification
DI
NU
ED
USPS-STD-4B+ Approved
FRONT LOADING 6200 SERIES
Access to compartments is from the front,
through a hinged master door. One door is
required for a control lock which secures the
master frame and cannot be used for mail
distribution. The master door must be hinged
on the right.
FINISH
• 628 natural anodized aluminum (standard)
• Optional finishes -
SNAP-ON TRIM
9/ " x 1 1/ " extruded aluminum
16
2
SPRING LATCH TYPE LOCK
(671-04)
Includes 5-pin tumbler cylinder
670-08 with 2 keys and spring
latch housing. Can be supplied
in 1,000 different key changes.
Not compatible with 660-06
window on size "1" door.
4-POINT LOCKING SYSTEM
Provides added protection
against break-ins. When
locked, the door is secured
at two points each, top and
bottom, and by reinforced continuous interlocking extrusions
at the pivot side. The five-pin
lock is available with 1,000
key changes.
Note: Available only for
Series HS6200 and HS6300
mailboxes.
SUPPLIED BY CUSTOMER
REMOVABLE CORE LOCK
Complete assembly, adapted
by lock manufacturer to fit
mailbox doors. Supplied by
customer for installation by
Bommer.
KEYED-IN CYLINDERS
Special cylinders keyed into
building keying system, sup-
MODEL 9041-12
Can be ordered with 1 to 3 fixed directory
panels with 38 names in each panel.
MODEL 9042-3
Can be ordered with outgoing mail slot,
which is located in the last door of any unit.
MOUNTING METHODS
•Recessed in wall: 6 1/2" depth required (mail-
box projects 1/2")
•Semi-recessed in 9343 mounting frame: 4" depth required (mailbox projects 3")
•Full surface in 9341 mounting frame (mailbox projects 6 3/4")
SPECIFICATIONS
COMPARTMENT SIZE
•15" high x 5" wide x 6" deep
DOOR LOCK
•5-pin cam type with 2 keys (standard)
•Optional locks
MODEL 6330
The 6330 is the same as the 6310 except it
contains one or more multiple size doors. A
layout must accompany all orders. HS 6330
has a 4-point locking system.
SUPPLIED BY BOMMER
COMBINATION LOCK (672-01)
3-digit, single dial type with
spring latch and automatic
throw-off. For dormitories or
other installations not serviced
by the Postal Service.
USPS-STD-4B+ Approved
Each 9040 mailbox consists of 3 to 7 compartments enclosed within a wall box. Constructed
of heavy gauge galvanized and chromated
steel. Access for loading is gained by unlocking a U.S.P.S. control lock and pivoting the
compartments forward.
DOOR IDENTIFICATION
•Name and number slots in door with card holder (standard)
•Optional Identification
plied by customer for installation with spring latch type
housing. Cylinder numbers listed include special adaptation
made by cylinder manufacturer.
Not compatible with 660-06
window size "1" door.
Assembly No.
A7115
A7116
A7117
6060-12605A
6060-12606A
6060-12607A
Cylinder No.
954
4101
20-069
145
C1810
20-0106
Pins
5
6
7
5
6
7
Manufacturer
Best
Best
Best
Falcon
Falcon
Falcon
Manufacturer
Falcon
Sargent
Schlage
Weslock
Yale
Medeco
FINISH
•628 natural anodized aluminum (standard)
•Optional finishes
Model 5770
Not U.S.P.S. Approved
Each mailbox consists of 3 to 10 compartments
enclosed within a wall box. The wall box and
compartments are constructed of heavy guage
galvanized and chromated steel providing both
durability and resistance to rust. Access for
loading is gained by unlocking a control lock
and pivoting the compartments forward.
COMPARTMENT SIZE:
• 15" high x 3 1/2" wide x 4" deep
MAIL COLLECTION UNITS
Recessed Units
Subject to Approval of Local Postal Authorities
U.S.P.S. Approved
FRONT LOADING MODEL 462
REAR LOADING MODEL 463
•Available in special sizes to match height of 4, 5, 6 and 7 high 6200/6300 Series mailboxes
MODEL 491
•Recessed 61/2" in wall (projects 1/2")
•Mounting Frames for 491:
498 - Semi-recessed 4" in wall (projects 3")
499 - Surface mounted (projects 63/4")
•491-P - For private use only
FRONT COLLECTION MODELS 465-4, 465-5,
465-6, 465-7
•Available in heights compatible with all front and rear loading horizontal mailboxes
DI
IDENTIFICATION
•Front plate is engraved "LETTERS" (standard)
•Optional (as specified), 1" high
FINISH
•628 natural anodized aluminum (standard)
•Optional finishes
LETTER SLOT SIZE
• 1/2" high x 11 1/4" wide (with anti theft mail deflector)
Model 464 Mail Sorter Unit
IDENTIFICATION
•Front plate is engraved "LETTERS" (standard)
•Optional (as specified), 1" high
FINISH
•628 natural anodized aluminum (standard)
•optional finishes
LETTER SLOT SIZE
• 1/2" high 10" wide (with anti-theft mail
deflector)
DIMENSIONS
•Frame: 1813/16" high x 131/8" wide
•Compartment: 163/4" high x 111/4" wide
•Wall cutout: 175/16" high x 117/8" wide x 61/2" deep
NU
ED
U.S.P.S. Approved
DI
SC
ON
TI
SPECIFICATIONS
CONSTRUCTION
• 1/4" thick face plate and hopper doors
•Hopper doors may be 1, 2, or 3 doors wide
FINISH
•628 natural anodized aluminum (standard)
•Optional finishes
IENTIFICATION
•Two and three hopper face plates engraved "UNITED STATES MAIL" in 2" high letters
•One hopper face plate engraved "U.S. MAIL" in 2" high letters
•Hopper doors are engraved in 1" high letters
BUNDLE OPENING
•Hopper door opening will accomodate a bundle 61/8" x 111/2" x 4"
Models 402 & 403 Letter Drop
SPECIFICATIONS
CONSTRUCTION
•Extruded aluminum
•Thru-wall liner included with model 403
FINISH
•628 natural anodized aluminum (standard)
•Optional finishes
IDENTIFICATION
•Slot door is engraved "U.S. MAIL" in 1" high letters (standard)
•Optional (as specified)
DIMENSIONS
•Frame Size - 5 7/8" high x 13" wide
•Door Size - 4" high 11" wide
•Wall Cutout - 4 1/4" high x 11 3/8" wide
NU
TI
SURFACE MOUNTED UNIT MODEL 467
Same as 465/466 Series with the following
exceptions:
ON
SC
CONSTRUCTION
•Extruded aluminum door 5/32" thick
•Extruded aluminum frame and trim
•Sheet aluminum compartment
CONSTRUCTION
•Extruded aluminum door 5/32" thick
•Extruded aluminum frame
•Galvanized and Chromated steel compartment
•Unit is surface-mounted
•Compartment construction is 1/8" aluminum
•Unit is furnished one size only - 7 high
•Dimensions: 203/16" wide x 121/2" deep x 39" high
SC
ON
SNAP-ON TRIM
• 9/16" x 1 1/2" extruded aluminum (standard)
SPECIFICATIONS
DOOR LOCK
•Prepared for U.S.P.S. lock (standard)
•Optional - 5-pin cam lock (no master keying)
REAR COLLECTION MODELS 466-4, 466-5,
466-6, 466-7
•Same construction as the front collection units except for a solid front panel of 1/8" aluminum and a lift off rear cover of 1/16" aluminum
DI
NU
TI
SPECIFICATIONS
DOOR LOCK
•Prepared for U.S.P.S. lock (standard)
•Optional - spring latch no. 671-04 or 671-02 with keyed-in cylinder by others
ED
Vertical Units
Subject to Approval of Local Postal Authorities
ED
Horizontal Units
SPECIFICATIONS
DOOR LOCK
•Prepared for U.S.P.S. lock (standard)
•Optional - 5-pin cam lock (no master keying)
CONSTRUCTION
•Mail removal door is 1/8" aluminum, swings on a continuous hinge and varies in height from 1011/16" to 273/16"
•Compartment is of the same construction as
the 6200, 6300, 6001 and 6101 Series horizon tal mailboxes, except for a solid 1/16" rear cover
•Hopper door is 1/4" thick aluminum
•The front plate surrounding the hopper door is 1/8"
IDENTIFICATIONS
•Hopper door is engraved "LETTERS AND
LETTER MAIL TIED IN BUNDLES"
•The front plate surrounding the hopper door is engraved "U.S. MAIL LETTER BOX"
FINISH
• 628 natural anodized aluminum (standard)
•optional finishes
BUNDLE OPENING
•Mail chute is 1/8" thick alu minum with an opening which will permit a bundle 61/8" x 111/2" x 4" to drop in the box. Opening is protect-
ed by inside baffle plate to prevent removal of mail
from box through deposit opening.
PEDESTAL MAILBOXES
PARCEL LOCKERS
Models 562 & 563
Key Keeper
Rear Loading 6700 Series
U.S.P.S. Approved
U.S.P.S. & Canada (local approval required)
NU
ED
Model 5621
DI
SC
ON
TI
FRONT LOADING MODEL 562
REAR LOADING MODEL 563
SPECIFICATIONS
Doors are fabricated from 1/8" thick aluminum
plate and have a continuous hinge for the
entire height of the door. Rear loading model
is equipped with a lift off cover. Each door
has a dual lock mechanism that retains the
tenant key until released by the postal control key. Door lock is a 5-pin cam lock and
the key retainer lock is either an Arrow
postal service lock or a Master dead bolt
lock. Parcel lockers are compatible in size
and construction and include trim to for an
integral unit with the mailboxes and mail
collection units. Standard finish is 628 natural anodized aluminum; optional finishes.
PARCEL LOCKER DOORS ARE AVAILABLE IN A
VARIETY OF COMPARTMENT SIZES:
P2 - 101/2" high x 121/2" wide x 151/2" deep
P3 - 16" high x 121/2" wide x 151/2" deep
P4 - 211/2" high x 121/2" wide x 151/2" deep
P5 - 27" high x 121/2" wide x 151/2" deep
Recessed or Full Surface Mounting *
Permit the use of automatic-locking street
entrance doors for apartments. Maintain security, but allow mailman to enter the building
to distribute mail in conformance with
U.S.P.S. regulations.
MODEL 5620 - Loose key type prepared for U.S.P.S.
lock (standard)
MODEL 5621 - With key retractor and 24" chain only, prepared for U.S.P.S. lock
MODEL 5622 - Same as 5620 with 5-pin cam lock no. 6708
MODEL 5624 - Same as 5620 but prepared to receive
Medeco 5-pin cam lock supplied by
customer for installation by Bommer
MODEL 5626 - Same as 5621 but prepared to receive
Medeco 5-pin cam lock supplied by
customer for installation by Bommer
* Use 5641 full surface frame for surface
mounting
SPECIFICATIONS
FINISH
•628 natural anodized aluminum (standard)
•Optional finishes
DIMENSIONS
•Frame size - 4 3/4" high x 6 3/8" wide
•Door size - 2 3/4" high x 4 3/8" wide
•Wall cutout size - 3" high x 43/4" wide x 1 3/4" deep
REAR LOADING 6700 SERIES
The U.S.P.S. refers to this type of mail-box
as an NDCBU (Neighborhood Delivery and
Collection Box Unit). Access to the compartments is from the rear through a hinged
door(s). Extruded aluminum framing members and doors provide strength, resistance
to corrosion and attractive appearance.
Double-wall mail compartments are fabricated
of extruded and sheet aluminum. Units are
designed to meet or exceed U.S.P.S. Pub. 18
and Canada regulations. Mailboxes are completely assembled at the factory and only
require mounting to the aluminum pedestal
in the field. One compartment is convertible
in all stocked models for use as a mail collection receptacle, but must be requested on
all custom units.
SPECIFICATIONS
COMPARTMENT SIZE
•5" high x 6" wide x 15" deep
DOOR LOCK
•5-pin cam type number 6708 with
dust/rain shield and 3 keys
•Optional locks are not available
CONTROL DOOR LOCK
•Prepared for U.S.P.S. lock
•Private lock
DOOR IDENTIFICATION
•Stamped numbers in doors, 1-8, 1-12, 1-16
(standard)
•Optional - engraved doors
FINISH
•628 natural anodized aluminum (standard)
•Optional finish-baked enamel
Bommer Industries, Inc.
Box 187,
19810 Asheville Hwy.,
Landrum, SC 29356
(800) 334-1654
Fax (877) 426-1039
www.bommer.com
REGIONAL WAREHOUSES
Western United States
Phone: 800-334-1654
Fax: 877-426-0388
877-426-1039
Central United States
Phone: 800-334-1654
Fax: 877-426-0388
877-426-1039
SS2006-03 08/06