Satis Vacuum

0317899
SATIS MC LAB series 2601380:
standalone, compact cleaning
and coating laboratories
Satis Vacuum
Satis Vacuum
EJQDQH
•r/'J
®
В
I
Satis
MC LAB 380
Satis
The standalone SATIS MC LAB series coating
The SATIS T 10 ultrasonic cleaning unit consists
laboratory offers an ideal entry-level position
of six tanks integrated in a flowbox. It assures fully
in the profitable market for antireflection
automatic, optimized preparation of the lenses pnorto
coatings, but also grants enhanced flexibility
coating, a critical prerequisite for perfect thin-film qua-
and shorter process times. The configuration
lity. An automatic conveyor carries the lens holder
includes a fully automatic high-vacuum system,
a cleaning system which is also automatic, and
an integrated control system for quality assurance. Its footprint is only about 5 m2.
SATIS T IO ultrasonic cleaning unit
baskets from one tank to the next. The configuration
includes two ultrasonic tanks with detergents and four
rinsing tanks, two with tap water and two with deionized water The "slow lift-out" feature of the last tank
allows the lenses to dry.
SATIS is the only company which for over 35 years has
been specialized in high-vacuum systems designed for
ophthalmic lens coating. In this special field, it has inVacuum chamber of SATIS MC 380
stalled more than 1400 vacuum systems all over the
world.
SATIS MC 260/380 box coaters are equipped
The compact coating laboratories contain the
with a totally new lens turning device which will set
vast experience in mechanical engineering and process
new standards in the optical industry (SATIS invented
development accrued by the company. Accordingly,
the lens turning system for ophthalmic lens coating
the SATIS MC LAB series features the same operating
applications, by the way). Thus, for example with the
convenience as the larger SATIS systems, the same
SATIS MC 380 Flip-over version an AR coating of out-
smart, ergonomie design, the same quality standards,
standing and fully reproducible quality can be automa-
and a high level of ecological compatibility.
tically applied to 88 surfaces in an approx. 50-mmute
The unique advantages of the MC LAB 260/380 con-
vacuum cycle. In other words, the throughput of the
cept open totally new perspectives.Two or more MC
system is 44 lenses coated on both sides approx. every
260/380 box coaters can be deployed in parallel
50 minutes. The superior characteristics of the thin
configurations (cluster mode). The productivity
film, typically a broadband multilayer AR coating with
attainable together with the new SATIS IONCOTE
standard SATIS green as the residual reflection color
family processes is unprecedented in the domain of
and a hydrophobic layer on top will fully meet cus-
Rx labs. The short cycle time of under 40 minutes,
tomer expectations.
extremely simple operation and high system reliabili-
btö 380
The SATIS IONCOTE process family was spe
dally developed and optimized in view of production
speed and abrasion resistance. Because it can run in
relatively simple coating systems, it is ideal for MC
260/380
box
coaters. The
proven
high-quality
Multiquartz" processes are also available.
SATIS MC 380
ty - additionally enhanced with redundancy - make
these "small" units extremely attractive production
Single lens holder SATIS MC 260
resources.
The MC 260/380 is designed in such a way that an
ion gun can be installed (standard for MC 380). The
ion gun greatly enhances the adhesion and abrasion
resistance of certain lacquer/substrate combinations
and is mandatory when glass and plastic lenses must
be coated simoultaneously
Even non-skilled personnel can operate the system
after brief familiarization. Since installation times are
minimal as well, you can start coating lenses according
Dome system of SATIS MC 380
to the motto Plug 'n' Coat.
Model 380 is available in 2 versions, either as a dome
An autodiagnosis system and a modem for
system or with the upgraded SATIS turning system orig-
remote troubleshooting via an ordinary telephone
inally introduced with model 260. The dome version
line keep system availability near 100%. But SATIS' sup-
can coat 68 lenses (66 mm) per cycle.The hourly out-
port extends even further: the scope of delivery of the
put for the two systems is between 35 and 89 lenses
SATIS MC LAB 260/380 includes a quality control
AR-coated on both sides.
system which allows you to regularly inspect the coa-
An optimization of the chamber geometry has made it
tings and identify potential problems before they affect
possible to apply hard coatings (SATIS IONCOTE
production.
PLUS II) in the MC LAB 380 as well (optional equipment required). This involves the application of a 3
micron quartz coating on both sides of the lens, achieving a degree of scratch-resistance otherwise only
attainable with lacquered lenses.
Double lens holder SATIS MC 380
operating procedure is therefore exactly the same for
COMPARSION BETWEEN
all SATIS box coaters (except the 260).This considerably simplifies familiarization and training and enhances
flexibility at the personnel level.
Main features of the SATIS MC LAB series:
2
• Footprint 4.8 / 5.8 m
• Latest-generation AR coating technology
• Electron beam evaporation system
• Integrated in-line ultrasonic cleaning
FRONT VIEW
TO P VI E W
system with a throughput of 90 lenses
per hour
To minimize the quality assurance effort at the customer's site, SATIS also offers a quality control service
• Up to 89 lenses (0 66mm) can be fully
automatically AR-coated per hour
through its laboratories in Milan, Columbus, Ohio, or
• Absolute uniformity of the coated lenses
Singapore. The customer can send coated lenses and
• Accommodates lens diameters
will receive the test results, on request by e-mail, and
electron micrographs.
of 48 to 80 mm
• Suitable for cut and uncut lenses
• Handles CR39, polycarbonate, acrylic, photo-
Attention ! Manual-Mode
Power OFF
chromic, high-index and other lenses
• Special processes for glass or organic
substrates can be developed to suit the
»--A-
customer's application
• Autodiagnosis and remote troubleshooting via modem
• Trade-in program for larger SATIS systems
• Optimized profitability
• Cluster operation (I operator handles
The new touch-screen interface for the MC380 is now
3 units)
identical with that of the large SATIS box coaters.The
Technical data subject to change without prior notice
Please contact SATIS for detailed information
Internet: www.satis-vacuum.ch
and/or a demonstration of the SATIS MC LAB
series.
Satis Vacuum
The pacemakers in coating technology
SWITZERLAND
Email [email protected]
Satis Vacuum Neuhofstrasse 12 CH-6340 Baar/ZG
Phone 41-41-766 16 16 Fax 41-41-766 16 10
USA
Email [email protected]
Satis Vacuum of America Inc. PO Box 180 Groveport OH 43 1 25
Phone 877-409-940 1 Fax 6 1 4-409-9306
ITALY
Email [email protected]
Satis Vacuum Via del Campacelo 13 1-20019 Settimo Milanese
Phone 39-02-33 55 61 Fax 39-02-33 50 12 00
ENGLAND
GERMANY
Email [email protected]
Satis Vacuum Beethovenstrasse 30 D-63526 Erlensee
Phone 49-6183-73081 Fax 49-6183-72770
Frmil
DUCK
Запросы направляйте по адресу:
DUCK GmbH, Bielefelder Str. 272
D-32791 Lage/Германия
тел.: (1049-5232) 9797-60, факс: 9797-62
e-mail: [email protected]
или в наше представительство в Москве:
тел./факс (095) 434-25-06
•ook
17
com.sg