Our range

Transcription

Our range

8 mm
12 mm
8 mm
12 mm
SAFI
26770 TAULIGNAN
Tel. 00 33 (0)4 75 53 56 29
Fax 00 33 (0)4 75 53 62 78
www.safi-valves.com
[email protected]
Our
range
VALVES
SWING CHECK VALVES
FILTERS
ACCESSORIES
Ball valves
in GRPP
in PVDF
(PolyVinylidene Fluoride)
(Glass Reinforced PolyPropylene)
Flanged compact
Flanged compact
3-way vertical way
PASSAGE IN L, T
OR DUAL L
FULL BORE
3/4/5-way horizontal
PORT IN L OR T
3-way vertical
DN15 (1/2’’)
and DN20 (3/4’’)
3-way
IBC valve
in PVC-U
Sandwich
SPECIFICATIONS:
3-way
FOR TANK
OR APPROVED
CONTAINER
Compact
SPECIFICATIONS :
Pressure: ………………………
Temperature: … ………………
Dimensions:
2-way: … ……………………
3-way:… ……………………
4-way:… ……………………
5-way:… ……………………
End fittings:
Flanges in compliance
with standards … ………………
Removable union nuts: … ……
Pressure: ……………… PN10
Temperature: … ……… -20°C to +120°C
Dimensions:
2-way: … …………… DN15 to DN150 (1/2’’ to 6’’)
3-way:… …………… DN50 (2’’)
End fittings:
with standards … ……… DIN PN10, ANSI 150, BS10/Table D
Removable
union nuts: … ………… Female for welding, end-to-end
welding, tapped, threaded
Seat: …………………… PTFE
O-ring seals: … ……… EPDM, FKM, PTFE
Options:… …………… Exists in ATEX
Electric or pneumatic actuated
(PolyVinyl Chloride)
Double Union
DN15 (1/2’’)
and DN20 (3/4’’)
FULL BORE
SPECIFICATIONS:
PASSAGE IN L, T
OR DUAL L
BSP threaded
DN150 (6’’)
DN150 (6’’)
DN80 (3’’) and
DN100 (4’’)
Double union
Double union
DN80 (3’’) and
DN100 (4’’)
PN10
-10°C to +100°C
in ABS
(Acrylonitrile Butadiene Styrene)
SPECIFICATIONS:
DN15 to DN150 (1/2’’ to 6’’)
DN15 to DN100 (1/2’’ to 4’’)
DN50 (2’’)
DN50 (2’’)
DIN PN10, ANSI 150, BS10/Table D
for bonding, welding, end-to-end welding,
tapped, threaded
Seat: …………………………… PTFE
O-ring seals: … ……………… EPDM, FKM, PTFE
Options :… …………………… Exists in PP ATEX
Electric or pneumatic actuated
Pressure: ……………… PN10
Temperature: … ……… 0°C to + 60°C
Dimensions:
2-way: … ……………… DN15 to DN100 (1/2’’ to 4’’)
End fittings:
with standards … ……… DIN PN10, ANSI 150
Removable
union nuts: … ………… for bonding, threaded
Seat: …………………… PTFE
O-ring seals: … ……… EPDM, FKM
Options:… …………… Double union :
Electric or pneumatic
Double Union
Pressure: ………………
Temperature: … ………
Dimensions:
2-ways: …………………
End fittings:
Removable
union nuts: … …………
Seat: ……………………
O-ring seals: … ………
PN10
-20°C to + 60°C
DN15 to DN50 (1/2” to 2”)
for bonding, threaded
PTFE
EPDM, food grade EPDM,
FKM, NBR
Options: … …………… Electric or pneumatic actuated
Diaphragm valves
All our diaphragm valves may be power-operated, up to DN65
in PPH
Butterfly valves
in PPH
(Polypropylene)
(Polypropylene)
SPECIFICATIONS:
DN50 TO DN150
For welding
Flange fitting
Flange fitting
FROM DN80
SPECIFICATIONS:
Pressure: ……………………………………
Temperature: … ……………………………
Dimensions: … ……………………………
End fittings:
Flanges in compliance with standards ……
End pieces … ………………………………
Diaphragm: …………………………………
in PVDF
PN10*
0°C to +90°C
DN15 to DN250 (1/2’’ to 10’’)
DIN PN10, ANSI/150
Male for push-on polyfusion
EPDM, FKM, PTFE
DN200 TO DN600
in PVDF
DN200 TO DN600
in PVC-U
Dimensions: … ………
End fittings:
with standards …………
Control: …………………
PN10*
-20°C to +120°C
DN50 to DN600 (2’’ to 24’’)
DIN PN10, ANSI 150
Manual by lever from DN50
to DN150
By handwheel gearbox from
DN200 to DN600
Seals: …………………… EPDM, FKM
Flange fitting
FROM DN80
SPECIFICATIONS:
Pressure: ……………………………………
End fittings:
End pieces … ………………………………
Diaphragm: … ……………………………
DIN PN10, ANSI 150
Manual by lever from DN50
to DN150
DN200 to DN600
SPECIFICATIONS:
DN50 TO DN150
Flange fitting
PN10*
0°C to +90°C
DN50 to DN600 (2’’ to 24’’)
For welding
End fittings:
in PVC-U
SPECIFICATIONS:
PN10*
-20°C to +120°C
DN15 to DN250 (1/2’’ to 10’’)
DIN PN10, ANSI/150
Male for push-on polyfusion
EPDM, FKM, PTFE
DN50 TO DN150
DN200 TO DN600
in PVC-C
End fittings:
PN10*
0°C to +60°C
DN50 to DN500 (2’’ to 20’’)
DIN PN10, ANSI150
Manual by lever
from DN50 to DN150
DN200 to DN500
(PolyVinyl Chloride - concentrated)
SPECIFICATIONS:
For bonding
Flange fitting
Flange fitting
FROM DN80
SPECIFICATIONS:
Pressure: ……………………………………
End fittings:
End pieces … ………………………………
Diaphragm: … ……………………………
* up to DN65 (2’’1/2)
PN10*
0°C to +60°C
DN15 to DN250 (1/2’’ to 10’’)
DN50 TO DN150
DIN PN10, ANSI/150
Male for bonding
EPDM, FKM, PTFE
* up to DN150 (6’’)
End fittings:
PN10*
0°C to +90°C
DN50 to DN600 (2’’ to 24’’)
DIN PN10, ANSI 150
Manual by lever
from DN50 to DN150
DN200 to DN600
Actuators
Accessories
Pneumatic actuators
Flow inspection hatches
Safety shields
In PVDF and PPH with flanges DIN
PN10 and ANSI 150
For flanges and for valves, against
corrosive projections
SPECIFICATIONS:
• Vane or rack & pinion
piston
•D
ouble-acting or singleacting with safety position:
normally open or normally
closed by lack of air.
•U
nit with mechanical or
Rack & pinion piston
Vane
electro-magnetic limit
switches
•R
egulation positioning with electrical signal 4-20mA or pneumatic signal
0.2 - 1 bar.
• Exists in ATEX
Electrical actuators
Flow inspection hatch
Quick unions in GRPP
Ventilation dampers
SPECIFICATIONS:
•V
oltage 12, 24, 48,110,
220 or 380 V AC
single phase or three
phase
• Voltage 12, 24 or 48 V DC
•P
ositioner with signal
4-20mA (option).
Quick unions
CamlocK type
Non-return valves
Flap, ball or piston
Flap, full port,
flange fitting
DN25 TO DN200
Fire unions
DN150 TO DN1800
(6’’ to 72’’)
ISO PLATE
guillemin Type
IBC & Tank accessories
Piston with spring in GRPP
(spring: stainless steel 316
or Hastelloy C276)
DN15 TO DN100
Ball in PVC
(vertical
installation)
DN15 TO DN100
Covers
Vent valves
Anti-corrosion filters
Valves for flexitanks
Special
Straight through (to basket) or in ‘Y’
Flap in PVC - PPH - PVDF
(installation
between flanges)
DN50 TO DN600
Piston with spring in PVDF
(spring: stainless steel 316
or Hastelloy C276)
DN15 TO DN100
CHARACTERISTICS of the various models:
Models:
• Flap
End fittings / Sandwich installation between:
with standards … …………… DIN PN10, ANSI 150
• Ball for vertical installation
• Piston for multi-position installation
Materials:
PVC-PPH-PVDF-PPFV depending on model
O-ring seals: … ……………… EPDM, FKM
PPH, PVDF, PVC
DN15 to DN200 (1/2’’ to 8’’)
Sample pick-off

Our range

Transcription

Similar documents

AVK RESILIENT SEATED GATE VALVE, PN16 21/50

jig master insert english - Lab

SpectraTurf Standard EPDM Colors

Industral shredders Schleicher/Intimus 14.90 and

JOCUL - INSTRUMENT DE PERFECŢIONARE PSIHO

Elastomer Expansion Joints

DYNAMiC

Brosura - Scoala Nr. 14 Ion Tuculescu, Craiova