maddox metal works, inc. electrostatic seasoner model es-200

ELECTROSTATIC SEASONER
MODEL ES-200
MADDOX METAL WORKS, INC.
4116 Bronze Way, Dallas, Texas 75237  Ph(214)333-2311  Fax(214)337-8169  E-mail: [email protected]
Maddox. The best - depend on it.
MADDOX METAL WORKS, INC.
4116 Bronze Way, Dallas, Texas 75237  Ph(214)333-2311  Fax(214)337-8169  E-mail: [email protected]
The ES-200 Maddox Electrostatic Seasoning System is a quantum leap in seasoning
technology. Due to the compact design, the seasoner can be mounted directly on the
tumbler (either the infeed or discharge side), or on a stand (rolling or fixed position).
By effectively applying electrostatic charges to seasonings and salt, a tremendous
improvement in seasoning coverage is achieved. The ES-200 covers the product
consistently and uniformly, even on the back side. Because of electrical interactions
between the seasoning and the product, seasoning particles no longer float in the air
-- significantly reducing dust and wasted seasoning. Unlike the conventional process,
the charged seasoning particles are applied without the use of additional oil sprays.
This produces a chip that is more aesthetically pleasing to the eye as well as to the
touch, contains seasoning that is less likely to come off on the consumer’s hands, and
lower in oil content.
Effective and simple to operate, the ES-200 delivers quantifiable cost savings in several
different ways as shown below:
•
The system is extremely reliable. When a completely dry seasoning is used, there
is no clogging of the seasoner components to create downtime.
•
The flavoring powder adheres to the product and not the equipment, resulting in
very little waste.
•
The Maddox system virtually eliminates the problem of airborne seasoning powders
contaminating the work environment. Conventional equipment releases fine,
powdery particles of the seasoning to float and drift in the air. This frequently
causes contamination of other machines in the processing line and forces personnel
to resort to the wearing of respirator masks. When using the ES-200, the charged
particles are confined to the interior of the tumbler’s drum -- a feature that line
operators will greatly appreciate.