1928-31 Ford Model A Catalog

Transcription

1928-31
Ford Model A Catalog
Automotive Thermal Acoustic Insulation
Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat
•Reduce Road Noise
•Reduce Exhaust Harmonics
•Eliminate Mechanical Noise
•Stop Body Panel Vibration
•Reduce Radiated & Reflected Heat
•Stop Audio System Vibration
Pre-Cut Ready to Install Kits
Year • Make • Model Specific
The Coolest Cars Have QuietRIDE Inside! ™
Roof Kit
Kits are available for these Vehicles Firewall Insulator
Fits under dash against the
See AcoustiTrunk Catalog
firewall bulkhead.
Roof & Quarter Panels
above beltline.
Trunk Floor Kit
Trunk Floor & Tire Well
Body Panel Kit
All Panels below the beltline
including Package Tray, Seat
Divider, Rear Wheel Wells,
Fenders, Rear Quarters and
Tail Panels
Floor Kit
Front Floor, Rear Floor,
Transmission Hump/
Driveline
Door Kit
Cowl Kit
Ford Motor Company
Trademarks
are used under license to
QuietRide Solutions LLC.
All Doors
Panels between the
firewall and front door of
the vehicle.
Everything in One Box to Do the Job Right!
Pre-Cut, Ready To install Kits are Year, Make and Model
Specific and include:
•Dynamat Xtreme
•Heat Shield Barrier Insulation
•Spray Adhesive •Seam Tape
•Illustrated Instructions
9-1-2014
For more information contact us at: [email protected]
©2003-15 •Prices Subject to Change Without Notice
Order Line: 888-777-3410
Tech Line:
209-942-4777
Fax: 209-942-4476
6507 Pacific Avenue Ste. 334 Stockton, CA 95207
1928-31
Ford Model A
Pre Cut Kits Ready to Install
Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat
Introducing a multi-stage, automotive insulation
and sound damping system to give Model A cars
and Trucks the “quiet riding comfort” found in today’s new cars. AcoustiSHIELD kits are designed
on current “state-of-the-art” auto acoustic technology, to insulate and control the noise, vibration
and heat in the passenger cabin. Kits are pre-cut
and come with easy-to-follow installation instructions-----everything you need to do the job right.
Turn Your Model A into “Quiet Riding Comfort”
Stage 1
Sound Damper Pads
The first stage consists of pre-trimmed, self-adhesive, Sound
Damper Pads, bonded to strategically located trouble spots on
the floor pan and roof of the vehicle to control body panel vibration and noise. These spots are mapped and labeled in detailed
instructions which are included in the kit.
Kits Include:
• Stage 1 Pre-Sized Sound Damper Pads
• Stage 2 Pre-Trimmed Heat Absorber / Barrier
Panels, Spray Adhesive and Sealing Tape
• Complete Illustrated Installation Instruction
Dealer program available. For more information
contact us at [email protected]
©2003-15 Quiet Ride Solutions Prices Subject to Change Without Notice
Stage 2
Heat Absorber/Barrier Panels
The second stage uses a high-tech absorber/barrier material,
bonded to the body panels, to both sound deaden and insulate
the vehicle from radiant heat penetration from the engine and
road. Each absorber panel is cut to the correct shape and contour and is mapped and labeled in the detailed instructions.
Ford Motor Company
Trademarks
Ford Model A
Product Application Codes and Price Sheet
Inventory# Description Price
1929 Model A Cabriolet
1928-1929 Ford Model A Cars
1928-29 Model A Coupe
FORD 2900-CABAK
1929 Ford Model A Cabriolet Complete Kit
475
FORD 2829-CAK
1928-29 Ford Model A Coupe Complete Kit
597
FORD 2900-CABBPK
1929 Ford Model A Cabriolet Body Panel Kit
189
FORD 2829-CBPK
1928-29 Ford Model A Coupe Body Panel Insulation Kit
189
FORD 2900-CABCK
1929 Ford Model A Cabriolet Cowl Insulation Kit
43
FORD 2829-CCK
1928-29 Ford Model A Coupe Cowl Insulation Kit
43
FORD 2900-CABFK
1929 Ford Model A Cabriolet Floor Insualtion Kit
131
FORD 2829-CFK
1928-29 Ford Model A Coupe Floor Insulation Kit
131
FORD 2900-CABTK
1929 Ford Model A Cabriolet Trunk Insualtion Kit
73
FORD 2829-CTK
1928-29 Ford Model A Coupe Trunk Insulation Kit
68
ASU-DDBIK-2
Universal 2 Door Damper/Barrier Insulation Kit
65
FORD 2829-CRK
1928-29 Ford Model A Coupe Roof Insulation Kit
131
ASU-DDBIK-2
65
1928-29 Model A Tudor Sedan
1929 Model A Town Sedan
FORD 2900-TSAK
1929 Ford Model A Town Sedan Complete Kit
618
FORD 2900-TSBPK
1929 Ford Model A Town Sedan Body Panel Kit
131
FORD 2829-TDAK
1928-29 Ford Model A Tudor Sedan Complete Kit
526
FORD 2900-TSCK
1929 Ford Model A Town Sedan Cowl Insulation Kit
43
FORD 2829-TDBPK
1928-29 Ford Model A Tudor Sedan Body Panel Kit
123
FORD 2900-TSFK
1929 Ford Model A Town Sedan Floor Insulation Kit
175
FORD 2829-TDCK
1928-29 Ford Model A Tudor Sedan Cowl Insulation Kit
40
FORD 2900-TSRK
1929 Ford Model A Town Sedan Roof Insulation kit
175
FORD 2829-TDFK
1928-29 Ford Model A Tudor Sedan Floor Insulation Kit
164
ASU-DDBIK-2
65
FORD 2829-TDRK
1928-29 Ford Model A Tudor Sedan Roof Insulation Kit
164
ASU-DDBIK-2
65
1928-29 Model A Fordor Sedan
1930-1931 Ford Model A Cars
1930-31 Model A Coupe
FORD 3031-CAK
1930-31 Ford Model A Coupe Complete Kit
597
618
FORD 3031-CBPK
1930-31 Model A Coupe Body Panel Insulation Kit
189
FORD 2829-FDBPK 1928-29 Ford Model A Fordor Sedan Body Panel Kit
131
FORD 3031-CCK
1930-31 Ford Model A Coupe Cowl Insulation Kit
43
FORD 2829-FDCK
1928-29 Ford Model A Fordor Sedan Cowl Insulation Kit
43
FORD 3031-CFK
1930-31 Ford Model A Coupe Floor Insulation Kit
131
FORD 2829-FDFK
1928-29 Ford Model A Fordor Sedan Floor Insulation Kit
175
FORD 3031-CRK
1930-31 Ford Model A Coupe Roof Insulation Kit
131
FORD 2829-FDRK
1928-29 Ford Model A Fordor Sedan Roof Insulation Kit
175
FORD 3031-CTK
1930-31 Ford Model A Coupe Trunk Insulation Kit
73
ASU-DDBIK-4
128
ASU-DDBIK-2
65
FORD 2829-FDAK
1928-29 Ford Model A Fordor Sedan Complete Kit
1928-29 Model A Roadster
1930-31 Model A Tudor Sedan
FORD 2829-RAK
1928-29 Ford Model A Roadster Complete Kit
410
FORD 3031-TDAK
FORD 2829-RBPK
1928-29 Ford Model A Roadster Body Panel Kit
189
FORD 2829-RCK
1928-29 Ford Model A Roadster Cowl Insulation Kit
43
FORD 2829-RDK
1928-29 Ford Model A Roadster Door Damper Kit
FORD 2829-RTK
1928-29 Ford Model A Roadster Trunk Insulation Kit
FORD 2829-RFK
1928-29 Ford Model A Roadster Floor Insulation Kit
1930-31 Model A Tudor Sedan Complete Acoustic Kit
559
FORD 3031-TDBPK
1930-31 Model A Tudor Sedan Body Panel Kit
131
FORD 3031-TDCK
1930-31 Model A Tudor Sedan Cowl Insulation Kit
43
73
FORD 3031-TDFK
1930-31 Model A Tudor Sedan Floor Insulation Kit
175
73
FORD 3031-TDRK
1930-31 Model A Tudor Sedan Roof Insulation Kit
175
131
ASU-DDBIK-2
65
1928-29 Model A Phaeton
1930-31 Model A Fordor Sedan
FORD 2829-FDPAK
1928-29 Ford Model A Fordor Phaeton Complete Kit
478
FORD 3031-FDAK
1930-31 Model A Fordor Sedan Complete Kit
618
FORD 2829-FDPBPK
1928-29 Ford Model A Fordor Phaeton Body Panel Kit
189
FORD 3031-FDBPK
1930-31 Model A Fordor Sedan Body Panel Kit
131
FORD 2829-FDPCK
1928-29 Ford Model A Fordor Phaeton Cowl Kit
43
FORD 3031-FDCK
1930-31 Model A Fordor Sedan Cowl Insulation Kit
43
FORD 2829-FDPDK
1928-29 Ford Model A Fordor Phaeton Door Damper Kit
101
FORD 3031-FDFK
1930-31 Model A Fordor Sedan Floor Insulation Kit
175
FORD 2829-FDPFK
1928-29 Ford Model A Fordor Phaeton Floor Kit
175
FORD 3031-FDRK
1930-1931 Model A Fordor Sedan Roof Kit
175
ASU-DDBIK-4
128
ASU-DDBIK-4
128
©2003-15 Quiet Ride Solutions
Prices Subject to Change Without Notice
For more information visit: www.quietride.com or contact us at [email protected]
Inventory# Description 1930-31 Model A Town Sedan
Price
Inventory# Description 1928-1929 Ford Model A Trucks
Price
1928-29 Model A Roadster Pickup
FORD 3031-TSAK
1930-31 Model A Town Sedan Complete Kit
618
FORD 3031-TSBPK
1930-31 Model A Town Sedan Body Panel Kit
131
FORD 2829-RTAK
1928-29 Ford Model A Roadster Pickup Complete Kit
340
FORD 3031-TSCK
1930-31 Model A Town Sedan Cowl Insulation Kit
43
FORD 2829-RTCK
1928-29 Ford Model A Roadster Pickup Cowl Kit
73
FORD 3031-TSFK
1930-31 Model A Town Sedan Floor Insulation Kit
175
FORD 2829-RTDK
1928-29 Ford Model A Roadster Pickup Door Damper Kit
73
FORD 3031-TSRK
1930-31 Model A Town Sedan Roof Insulation Kit
175
FORD 2829-RTFK
1928-29 Ford Model A Roadster Pickup Floor Kit
131
ASU-DDBIK-4
128
FORD 2829-RTRCK
1928-29 Ford Model A Roadster Pickup Rear Cab
Insulation Kit
116
1930-31 Model A Roadster
FORD 3031-RAK
1930-1931 Model A Roadster Complete Kit
410
FORD 3031-RBPK
1930-1931 Model A Roadster Body Panel Kit
189
FORD 3031-RCK
1930-1931 Model A Roadster Cowl Insulation Kit
43
FORD 3031-RDK
1930-1931 Model A Roadster Door Damper Kit
73
FORD 3031-RFK
1930-1931 Model A Roadster Floor Insulation Kit
131
FORD 3031-RTK
1930-1931 Model A Roadster Trunk Insulation Kit
73
1930-31 Model A Fordor Phaeton
FORD 3031-FDPAK
1930-31 Model A Fordor Phaeton Complete Kit
478
FORD 3031-FDPBPK
1930-31 Model A Fordor Phaeton Body Panel Kit
189
FORD 3031-FDPCK
1930-31 Model A Fordor Phaeton Cowl Insulation Kit
43
FORD 3031-FDPDK
1930-31 Model A Fordor Phaeton Door Damper Kit
101
FORD 3031-FDPFK
1930-31 Model A Fordor Phaeton Floor Kit
175
1930-31 Model A Victoria
FORD 3031-VAK
1930-31 Ford Model A Victoria Complete Kit
559
FORD 3031-VBPK
1930-31 Ford Model A Victoria Body Panel Kit
131
FORD 3031-VCK
1930-31 Ford Model A Victoria Cowl Insulation Kit
43
FORD 3031-VFK
1930-31 Ford Model A Victoria Floor Insulation Kit
175
FORD 3031-VRK
1930-31 Ford Model A Victoria Roof Insulation Kit
175
ASU-DDBIK-2
65
1930-31 Model A A-400
FORD 3031-A4AK
1930-31 Model A A-400 Complete Kit
394
FORD 3031-A4BPK
1930-31 Model A A-400 Body Panel Insulation Kit
131
FORD 3031-A4CK
1930-31 Model A A-400 Cowl Insulation Kit
43
FORD 3031-A4FK
1930-31 Model A A-400 Floor Insulation Kit
175
ASU-DDBIK-2
65
1930-31 Model A Cabriolet
1928-29 Model A and AA Closed Cab Truck
FORD 2829-TCCAK
1928-29 Ford Model A Closed Cab Truck Complete Kit
446
FORD 2829-TCCCK
1928-29 Ford Model A Closed Cab Truck Cowl Kit
43
FORD 2829-TCCFK
1928-29 Ford Model A Closed Cab Truck Floor Kit
131
FORD 2829-TCCRCK
1928-29 Ford Model A Closed Cab Truck Rear Cab Kit
101
FORD 2829-TCCRK
1928-29 Ford Model A Closed Cab Truck Roof Kit
131
ASU-DDBIK-2
65
1928-29 Model A Panel Delivery
FORD 2829-PDAK
1928-29 Ford Model A Panel Delivery Complete Kit
597
FORD 2829-PDCK
1928-29 Ford Model A Panel Delivery Cowl Kit
43
FORD 2829-PDFK
1928-29 Ford Model A Panel Delivery Front Floor Kit
131
FORD 2829-PDRDK
1928-29 Ford Model A Panel Delivery Rear Door Kit
101
FORD 2829-PDRFK
1928-29 Ford Model A Panel Delivery Rear Floor Kit
131
FORD 2829-PDRK
1928-29 Ford Model A Panel Delivery Roof Kit
160
ASU-DDBIK-2
65
1930-1931 Ford Model A Trucks
1930-31 Model A Roadster Pickup
FORD 3031-RTAK
1930-1931 Model A Roadster Pickup Complete Kit
340
FORD 3031-RTCK
1930-1931 Model A Roadster Pickup Cowl Kit
43
FORD 3031-RTDK
1930-1931 Model A Roadster Pickup Door Dampers Kit
73
FORD 3031-RTFK
1930-1931 Model A Roadster Pickup Floor Kit
131
FORD 3031-RTRCK 1930-31 Model A Roadster Pickup Rear Cab Kit
116
1930-31 Model A and AA Closed Cab Truck
FORD 3031-TCCAK
1930-31 Model A Closed Cab Complete Kit
446
FORD 3031-TCCCK
1930-31 Model A Closed Cab Cowl Insulation Kit
43
FORD 3031-TCCFK
1930-31 Model A Closed Cab Floor Insulation Kit
131
FORD 3031-TCCRCK
1930-31 Model A Closed Cab Rear Cab Insulation Kit
101
FORD 3031-CABAK
1930-31 Ford Model A Cabriolet Complete Kit
475
FORD 3031-TCCRK
1930-31 Model A Closed Cab Roof Insulation Kit
131
FORD 3031-CABBPK
1930-31 Model A Cabriolet Body Panel Insulation Kit
189
ASU-DDBIK-2
65
FORD 3031-CABCK
1930-31 Ford Model A Cabriolet Cowl Insulation Kit
43
FORD 3031-CABFK
1930-31 Ford Model A Cabriolet Floor Insulation Kit
131
FORD 3031-CABTK
1930-31 Ford Model A Cabriolet Trunk Insulation Kit
73
ASU-DDBIK-2
65
1930-31 Model A Panel Delivery
FORD 3031-PDAK
1930-1931 Ford Model A Panel Delivery Complete Kit
597
FORD 3031-PDCK
1930-1931 Ford Model A Panel Delivery Cowl Kit
43
FORD 3031-PDFK
1930-1931 Ford Model A Panel Delivery Front Floor Kit
131
FORD 3031-PDRDK
1930-1931 Ford Model A Panel Delivery Rear Door Kit
101
FORD 3031-PDRFK
1930-1931 Ford Model A Panel Delivery Rear Floor Kit
131
FORD 3031-PDRK
1930-1931 Ford Model A Panel Delivery Roof Kit
160
ASU-DDBIK-2
65
Ford Model A
Product Application Codes and Price Sheet
Other Parts For Ford Model A Vehicles
FORD 2829-PH35-CSP
1928-29 Ford Model A Fordor Phaeton Cowl Panel Set
120
FORD 2829-R40-CSP
1928-29 Ford Model A Roadster Cowl Panel Set
120
FORD 2829-BLB60-CSP
1928-29 Ford Model A Briggs/Leatherback (60) Cowl Side
Panels (ABS)
109
FORD 2829-FD60-CSP
1928-29 Ford Model A Fordor Sedan (60) Cowl Side Panels
116
FORD 2829-SW150-CSP
1928-29 Ford Model Station Wagon (150) Cowl Panel Set
120
FORD 2829-CCT-TSP
1928-1929 Ford Model A Closed Cab Truck Side Panel Set
(ABS)
116
FORD 2829-RP-TSP
1928-29 Ford Model A Roadster Pickup Cowl Panel Set
120
FORD 3100FD160-CSP
(ABS)
116
FORD 3100A4CVT-CSP
1930-31 Ford Model A-400 Convertible Sedan Cowl Side
Panels (ABS)
109
FORD 3031-SW150-CSP
1930-31 Ford Model A Station Wagon (150) Cowl Side Panels
116
1928-31 Ford Model A Products
It was not until 1932 that Ford cars and trucks were delivered
with a firewall insulator and many restores can attest to the fact
that the Model A is one “hot” car to drive. Quiet Ride Solutions
developed these firewall insulators to fit and look like OEM and
then added heatshield insulation to make them even better.
Firewall Insulators
1928-29
1930-31
Late 1931
FORD 3031V-CSP
1930-1931 Ford Victoria Cowl Panel Set (ABS Plastic)
116
FORD 2829-CT
1928-29 Ford Model A Firewall Insulator
152
FORD 3031FDTS160CSP
1930-31 Ford Model A Fordor Town Sedan Cowl Side Panels
116
FORD 3031-CT
1930-1931 Ford Model A Firewall (Early)
152
FORD 3031-PH35-CSP
1930-31 Ford Model A Phaeton (35) Cowl Side Panels (ABS)
116
FORD 3100-CT
1931 Ford Model A Firewall Insulator (Late)
152
FORD 3031-R40-CSP
1930-31 Ford Model A Roadster (40) Cowl Side Panels (ABS)
116
FORD 3031CP45-CSP
1930-1931 Ford Model A Coupe Cowl Panel Set (ABS Plastic)
(OEM Color Brown)
116
FORD 3100FD160-CSP
116
Ford Model A Jump Seat Cushion Cover and Other Panels
FORD 2829-TDJS
1928-29 Ford Model A Tudor Jump Seat Cover/Pair
116
FORD 3031-TDJS
1930-31 Ford Model A Tudor Sedan Jump Seat Cover
116
FORD 3031CPE-SD
1930-31 Ford Model A Coupe Seat Divider
116
FORD 3100VASB-P
1931 Ford Victoria Adjustable Passenger Seat Bottom
116
FORD 3031VNASB-D
1930-1931 Ford Victoria Non-Adjustable Driver Seat Bottom
116
FORD 3031VNASB-P
1930-1931 Ford Victoria Non-Adjustable Passenger Seat Bottom
109
Model A Cowl Panels
Henry Ford’s first use of the
“Chicken Track” texture
was on the cowl panels of the
Model A Ford in 1930-31.
Made with bound door edges
and colored the original Mocha
brown. The1928-29 cowl panels are a leather texture.
Sold in Pairs
Bitchin Firewall Insulator Products
All of our 1928-29 and 1930-31 Ford Model A Floor Kits
now include Wood Floor WeatherBarrier Insulation.
If your car is finished, you can insulate the wood floors
with one of these Wood Floor Weather Barrier Kits.
FORD 2829-WFB-FF
1928-1929 Ford Model A Front Wood Floor Barrier Kit
86
FORD 2829-WFB-TD
1928-1929 Ford Tudor Sedan FRONT/REAR Wood Floor Barrier Kit
112
FORD 3031-WFB-FF
1930-1931 Ford Model A Front Wood Floor Barrier Kit
86
FORD 3031-WFB-TD
1930-1931 Ford Tudor Sedan FRONT/REAR Wood Floor Barrier Kit
112
BIT 2829SBF-CT4
1928-31 Bitchin Ford Car Small Block Firewall (4’ Setback)
218
BIT 3031BBF-CT4
1930-31 Bitchin Ford Car Big Block Firewall (4 1/2’ Setback)
229
BIT 3031SBF-CT2
1930-31 Bitchin Ford Car Small Block Firewall (2 1/2’ Setback)
229
Direct Sheetmetal Firewall Insulator Products
DS 2829SBF-CT4
1928-1929 Direct Sheetmetal Ford Car Small Block Firewall
Insulator (4’ Setback)
229
DS 3031BBF-CT5
1930-1931 Direct Sheetmetal Ford Car Big Block Firewall
229
DS 3031BBF-CT5
1930-1931 Direct Sheetmetal Ford Car Big Block Firewall
229
Kits are also available separately for restorers who want to update their vehicle.
Wood Floor WeatherBarrier Panels are included in our Model A Floor kits.
Roof to Road Solutions to Control Passenmger Cabin Noise, Vibration and Heat
1928-29 and 1930-31
Ford Model A
Wood Floor
WeatherBarrier Insulation Kits
FORD 2829-WFB-FF (Front Floor)
FORD 2829-TD-WFB(Tudor Sedan)
FORD 3031-WFB-FF (Front Floor)
FORD 3031-TD-WFB(Tudor Sedan)
Prerequisites: Installation of any AcoustiShield
product begins with preparation of the interior surfaces.
All panels must:
•Be thoroughly cleaned--adhesive materials will not stick
to dusty, dirty, grimy, wood panel surfaces.
•Be bone dry.
•Be sure that the temperature of metal surface is above
70 degrees.
Surface Preparation:
• Old Wood Floors--Clean with TSP and dry. Sand the
bottom face of the floor and edges until smooth and
clean.
• New Wood Floor--Cut (or purchase) new wood floor
to fit in vehicle. Drill all holes required and pre-install to
check fit and finish. (Try to maintain a 1/8” gap between
the floor edge and the floor support structure.) Then
lightly sand all surfaces including edges.
Applying the Wood Floor Barrier Material:
Step 1--Lay the wood floor panel on a table, with the “bottom side” facing up. Lay out Weather Barrier Material
“bottom side up.” Smooth out any wrinkles.
1928-29
1930-31
Car and Truck
Front Floor Kits
1928-29
1930-31
Tudor Sedan Kits
The Wood Floor WeatherBarrier kit is designed to
insulate and protect the underside of wood floor
panels of cars and trucks (allowing the interior face
to be “furniture finished.” The barrier seals and
prevents the wood from absorbing moisture kicked
up from wet road conditions. It also reflects radiant
heat from exhaust systems and roadway away from
the floor surface.
Kit Contents:
Pre-Trimmed WeatherBarrier Insulation Panels
Spray Adhesive
Roll Aluminum Foil Tape
Tools Needed for Installation:
-Sharp Box Knife and Scissors
-Felt Tip Marker
Step 2 --Apply an even coat of spray adhesive to the surface of the wood. (Stand back and look across the wood
serface to be sure there are no “dry” spots. Do not put
spray adhesive on the edges of wood. Apply an even coat
of spray adhesive to the surface of the aluminum WeatherBarrier material.
FLOOR CROSS SECTION VIEW
Showing Application Process
Interior Facing
Passenger Cabin
Exterior Facing
Road
Wood Floor
Spray Adhesive
WeatherBarrier Aluminum
Aluminum Seam Tape
6507 Pacific Avenue Ste. 334 Stockton, CA 95207
Phone: 209-942-4777 FAX: 209-942-4476
E-mail: [email protected] • www.quietride.com
©2015 QuietRide Solutions All Rights Reserved
Step 7--Over lap the seam tape over the edge of the
wood floor) starting with the WeatherBarrier side.
Smooth the seam tape with hand presssure.
STOP and let both sides dry.
Step 3--Lay WeatherBarrier over the wood
floor, lining up the
edges.
Step 4--Working
from the center to
the edges-smooth
WeatherBarrier into
position
Step 8--Turn the floor board over and fold the
seam tape around the edge and seal it along the
top surface.
Floor barrier installation finished and ready
for placement in the vehicle.
WeatherBarrier aluminum surface can be painted
with a spray enamel
Step 5--With your box knife, run the blade around the
edges of the wood panel and closely trim all excess
WeatherBarrier material away from the edge of the
wood. Trim out out battery box,transmission cover
and pedal slots, etc
Interior Floor Side
WeatherBarrior Side
Step 6--Apply the aluminum seam tapearound the
edge of the wood floor. (See illustration)
1928-29 Ford Roadster
Complete AcoustiShield Insulation Kit
FORD 2829-RAK
Cowl Kit
Floor Kit
Trunk Kit
Body Panel Kit
Door Kit
Under Floor Weather Barrier Kit
Complete kits include the
Door Damper/Barrier Kit
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Firewall Insulator for this Vehicle
(Sold Separately)
Street Rod Firewall Insulator
BIT 2829SBF-T
DS 2829SBF-T
Original Ford Firewall Insulator
FORD 2829-CT
1928-29 Ford Cabriolet
FORD 2829-CBAK
Cowl Kit
Floor Kit
Trunk Kit
Body Panel Kit
Door Kit
See Catalog
this vehicle.
(Sold Separately)
BIT 2829SBF-T
DS 2829SBF-T
FORD 2829-CT
1928-29 Ford Coupe
FORD 2829-CAK
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
this vehicle.
(Sold Separately)
BIT 2829SBF-T
DS 2829SBF-T
FORD 2829-CT
1928-29 Ford Fordor (4-D)
FORD 2829-FDAK
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
See Catalog
this vehicle.
Includes Under Floor Weather
Barrier Kit
(Sold Separately)
BIT 2829SBF-T
DS 2829SBF-T
FORD 2829-CT
1928-29 Ford Phaeton (4-D)
FORD 2829-FDPAK
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Barrier Kit
See Catalog
this vehicle.
(Sold Separately)
BIT 2829SBF-T
DS 2829SBF-T
FORD 2829-CT
1928-29 Ford Town Sedan (4-D)
FORD 2829-TSAK
Cowl Kit
Floor Kit
Roof Kit
Barrier Kit
Body Panel Kit
See Catalog
this vehicle.
(Sold Separately)
BIT 2829SBF-T
DS 2829SBF-T
FORD 2829-CT
1928-29 Tudor Sedan (2-D)
FORD 2829-TDAK
Cowl Kit
Floor Kit
Roof Kit
Barrier Kit
See Catalog
this vehicle.
Body Panel Kit
(Sold Separately)
BIT 2829SBF-T
DS 2829SBF-T
FORD 2829-CT
1930-31 Ford Cabriolet
FORD 3031-CBAK
Cowl Kit
Floor Kit
Trunk Kit
Body Panel Kit
Barrier Kit
See Catalog
this vehicle.
Street Firewall Insulator
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1930-31 Ford Coupe
FORD 3031-CAK
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Barrier Kit
See Catalog
this vehicle.
Trunk Kit
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1930-31 Ford Fordor Sedan (4-D)
FORD 3031-FDAK
Cowl Kit
Floor Kit
Roof Kit
Barrier Kit
Body Panel Kit
See Catalog
this vehicle.
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1930-31 Ford Phaeton (4-D)
FORD 3031-FDPAK
Cowl Kit
Floor Kit
Body Panel Kit
See Catalog
this vehicle.
Barrier Kit
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1930-31 Ford Tudor (2-D)
FORD 3031-TDAK
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Barrier Kit
See Catalog
this vehicle.
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1930-31 Ford Town Sedan 4-D)
FORD 3031-TSAK
Cowl Kit
Floor Kit
Roof Kit
Barrier Kit
See Catalog
this vehicle.
Body Panel Kit
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1930-31 Ford Victoria (2-D)
FORD 3031-VAK
Cowl Kit
Floor Kit
Roof Kit
Barrier Kit
See Catalog
this vehicle.
Body Panel Kit
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1930-31 Ford Victoria (2-D)
FORD 3031-VAK
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Barrier Kit
See Catalog
this vehicle.
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1930-31 Ford A-400 (2-D)
FORD 3031-VAK
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
See Catalog
this vehicle.
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1928-29 Ford Closed Cab Truck
FORD 222829-CCTAK
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
See Catalog
this vehicle.
(Sold Separately)
BIT 2829SBF-T
DS 2829SBF-T
FORD 2829-CT
1928-29 Ford Roadster Pickup
FORD 2829-RTAK
Cowl Kit
Floor Kit
Rear Cab Kit
See Catalog
this vehicle.
(Sold Separately)
BIT 2829SBF-T
DS 2829SBF-T
FORD 2829-CT
1928-29 Ford Standard Panel Delivery Truck
FORD 2829-PDAK
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
See Catalog
this vehicle.
(Sold Separately)
BIT 2829SBF-T
DS 2829SBF-T
FORD 2829-CT
1930-31 Ford Closed Cab Truck
FORD 3031-TAK
Cowl Kit
Floor Kit
Roof Kit
Rear Cab Kit
See Catalog
this vehicle.
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1930-31 Ford Roadster Pickup
FORD 3031-RTAK
Cowl Kit
Floor Kit
Rear Cab Kit
See Catalog
this vehicle.
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
1930-31 Ford Standard Panel Delivery Truck
FORD 3031-PDAK
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Rear Door Kit
See Catalog
this vehicle.
BIT 3031SBF-T
DS 3031SBF-T
(Sold Separately)
FORD 3031-CT
FORD 3100-CT
A Roof to Road Solution to Control
Passenger Cabin Noise, Vibration and Heat
TM
AcoustiSHIELD Product Description
AcoustiShield is a two-stage thermal acoustic automotive insulation
product designed to control Noise, Vibration and Heat—the three
major issues that affect passenger cabin comfort. Kits include pre-cut,
ready-to-install Dynamat Xtreme® damper pads and HeatShield
Barrier Insulation panels which are packaged separately for easy
installation. Kits come with uniquely illustrated installation sheets,
spray adhesive and seam tape.
Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor,
Doors and Body Panels, which includes the seat divider, package tray and
rear wheel wells. The installation of a complete AcoustiShield kit
typically will reduce passenger cabin noise by 12 to 17 decibels. To put
this in perspective, a 10-decibel reduction is a 50 percent reduction
in noise that the human ear can easily detect. Barrier insulation will
reduce radiant heat by as much as 25 degrees.
AcoustiShield is a Two-Stage Process
Stage-One of the AcoustiShield process is the application of
small pre-cut Dynamat Xtreme® damper pads and strips to auto
body sheet metal to greatly reduce the vibration and noise
produced by these panels from entering the passenger cabin.
Quick Link
Stage-Two of the AcoustiShield process is the application of
pre-cut HeatShield Barrier Insulation panels to the auto body sheet
metal to encapsulate any remaining vibration/noise and to
thermally insulate the vehicle.
©2003-15 Quiet Ride Solutions LLC.
“AcoustiSHIELD”, AcoustiHOOD and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.
Expanded NVH Reference Information:
Cars and trucks make and/or absorb noise, vibration and heat (NVH) from multiple
directions--including internal and external air-borne noise, structure-borne noise as well as
radiant heat. NVH factors to consider:
•Engine NVH travels back from the front of the vehicle through the firewall and cowl.
•Wheel well trunk and rear body panel NVH travels forward through the seat divider and
package tray panels.
•Roadway radiant heat, often exceeding 140 degrees, rises through vehicle floor pans.
•Rumbling performance exhaust systems and transmission/drive line harmonics also rise
through vehicle floor pans.
•Direct heat from the sun penetrates the roof of the vehicle.
All of these influences “Apex” in the middle of the passenger cabin at ear level.
Add the noise produced by the sound system; the air rushing through the vents from the
HVAC system; and a normal conversation builds into a “shouting match” between the driver
and passenger to overcome the “harmonic drone” of vehicle mechanics.
AcoustiShield Photo Gallery
Typical Cowl Panel Sound Dampening and Thermal Barrier Insulation.
Typical Trunk Floor Sound Dampening and Thermal Barrier Insulation.
Typical Floor Panel Sound Dampening and Thermal Barrier Insulation.
Typical Roof Panel Sound Dampening and Thermal Barrier Insulation.
Typical Body Panel Sound Dampening and Thermal Barrier Insulation.
Ford Motor Company
Trademarks
MOPAR, JEEP, DODGE, HEMI, PLYMOUTH, RAM, SRT,
CHRYSLER and related logos, vehicle model names and trade
dress are trademarks of Chrysler Group LLC used under licenseby QuietRide Solutions LLC. © 2014 Chrysler Group LLC.
Made Right---Fit Right---Look Right
OEM Original Products
Firewall Insulator products are
pre-cut and ready to install with
standard OEM accessory and
mounting holes punched for
restoration applications. Each unit
has period correct insulation.
ABS Leather Grain Material
“Ultra High Definition”
Vinyl Rubber
Firewall Insulators are also
available without holes for
aftermarket HVAC systems and
Street Rod and Custom installs.
Direct Sheetmetal
Absolute Sheetmetal
Quick Link
ABS “Chicken Track” Material
Product Description—
ABS “Chicken Track Grain”
Early Ford Original Equipment Firewall Insulators
Production Period—FOMOCO: 1928 through 1948
Production Period--Some Early Mopar Vehicles
FOMOCO cars and trucks used a
unique “chicken track” texture on
their firewall insulator covers and
related products from 1928 through
1948. Quiet Ride has faithfully
reproduced this famous texture
and offers it exclusively on its ABS
molded firewall insulators and truck
headliners, cowl and door panels.
Each insulator product is molded
with an ABS material and readyto-install with Heat Shield Thermal
Barrier insulation, factory stock
accessory holes and mounting pin
locations punched.
Ford style steel mounting pins are
not included but are available for
separate purchase as needed.
Ford Motor Company
Trademarks
ABS Firewall Cover
Chicken Track Grain Material
Each insulator product is
molded from an “out of the car”
original firewall for contour and
accuracy.
Year-Make-Model Specific.
Firewall Insulators can be ordered without holes for
custom applications.
ABS “Leather Grain”
Original Equipment Firewall Insulators
Production Period—GM and MOPAR: 1926 through 1976
ABS Firewall Cover
Most OEMs used a leather grained
firewall cover on their cars and
trucks from 1926 through 1965.
Each insulator product is molded
with ABS material and ready-toinstall with factory stock accessory
holes and mounting pin locations
punched.
Kits does not include mounting
pins. Quiet Ride has an assortment
of “universal” mounting pin styles
available as needed.
Mounting pins are not included but
are available for separate purchase as
needed.
Ford Motor Company
Trademarks
Leather Grain Material
accuracy.
“Ultra High Definition Vinyl Rubber“
for General Motors Cars and Ford Cars and Trucks
Production Period—GM: 1964 to present
Production Period—FOMOCO: 1964 to present
FOMOCO and General Motors
began using a rubber based firewall
material in 1964 with the
introduction of the Mustang,
Chevelle family and Camaro Cars.
Quiet Ride molds these products using a “Ultra High Definition” vinyl
rubber. It comes ready to install
with a Heat Shield Thermal Barrier
insulation pad. Factory stock accessory holes and mounting pin locations are punched.
Kits include appropriate period
mounting pins.
accuracy.
Ford Motor Company
Trademarks
Product Description—Street Rod Firewall Insulators
Direct Sheetmetal
Absolute Sheetmetal (formerly Bitchin Products)
Production Period--GM: 1936 through 1972
Street Rod Firewall Insulators are
based on the steel after-market
firewalls that are manufactured by
Direct Sheetmetal and Absolute
Sheetmetal (formerly Bitchin Products) to stop the heat and noise generated by large engine installed in
smaller, older vehicles. Each
insulator product is molded with
ABS Leather grain material to fit the Each Street Rod Firewall Insulator
product is molded from a steel
steel engine and transmission recess
“like a glove.” All street rod products mold provided by the manufacturer
to achieve contour and accuracy.
are year, make and model specific,
and come ready to install with a
double layer of Heat Shield Thermal
Barrier insulation pad.
There are no mounting holes or
accessory cut-outs so customers can
achieve that “smooth” look in the
engine bay and passenger
compartment.
Customer must decide method of
installation. Quiet Ride makes a
Street Rod mounting pin kit,
available separately.
Thermal Insulation Types
•General Motors Cars and Trucks
•Ford Cars and Trucks
•MOPAR Cars and Trucks
Black Fiberglass Insulation
Typically used in vehicles 1949 through 1977
•ABS Firewall Insulators
Heat Shield Barrier Insulation
Typically used in vehicles 1928-48 and
Vinyl Rubber Firewalls 1964-present
•Street Rods
•Custom Firewalls
Concours Show Quality
Authentically Correct---“Fit like a Glove”---Easy to Install
All QRS Products, Materials and Craftsmanship
Meet or Exceed OEM Quality Standards
No customer has ever reported losing judged points on our firewall products.
Firewall Insulators--A Historical Perspective
The Firewall Insulator is the first line of defense against automotive Noise, Vibration and Heat
that is generated in the engine bay of the vehicle.
QRS manufactures more than 600 firewall products for antique, classic, custom and street rod
cars and trucks. The company has developed these products based on “out of car” original insulator pads that have been supplied by its customers. QuietRide Firewalls Insulators are exact
reproductions of OEM products.
Most firewall insulators made between 1928 and the mid-1960s were constructed with an oil
impregnated cardboard cover in combination with a number of insulation materials. In 1964
General Motors and Ford Motor Company began using a “spray-on” rubber material bonded to
a thin layer of “shody” insulation.
All of the company’s firewall products are vacuum form molded to fit the firewall and transmission contours exactly. They are digitized and manufactured on its Flow Water Jet Cutting System
for accurate fitting. Each firewall cover is backed with period correct insulation which could
include a black fiberglass or HeatShield barrier insulation.
Firewall Colors and “Sheen”
Just a word about the “look” of your old firewall in comparison to a new one--you may may note
that the new firewall does not look the same as your original--because of the “sheen.” The
firewall insulator in a car built in the 1930s or 40s is now at least 70-80 years old and is dirty and
dingy. When the vehicle came off the assembly line, all of its component parts were crisp, clean
and sparkling fresh.
With few exceptions, firewall insulators were black when they came from the factory. There were
some exceptions in the General Motors product line from 1933 through 1941 in which the
firewall insulators were a “mocha brown” color. The firewall color would typically match the
color of your clutch, brake and accelerator pedal rubber pads.
6507 Pacific Avenue--Ste 334 Stockton, CA 95207
Order Line: 888-777-3410
Tech Line (209) 942-4777
Fax (209) 942-4476
www.quietride.com
©2003-15 Quiet Ride Solutions LLC.
“AcoustiSHIELD” and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.
Fasteners
and Screws
Firewall Mounting Pin Options
For Older Cars and Trucks
American Cars and Trucks used a wide variety of mounting pins, clips, buttons and
screws to attach the firewall insulator to the interior of the steel firewall bulkhead.
Clean up and reuse your original mounting pins if you have them. We offer the
fol-lowing mounting pins and information based on what we have been able to find
avail-able.
Early Ford Firewall Mounting Pins
These all steel firewall mounting pins are a reproduction of the originals. They are
available in a 3/4 inch length (Long) and in a 1/2 inch length (Short). The long pins
work best for the early production cars and trucks. The Short pin works best for the
1942-48 cars and 1940-47 Trucks. The long pins may have been used in Ford cars as
late as 1954. The short pins may have been used in Ford Trucks through the mid 1950s.
Ford 3541-MPL 1935-41 Ford Firewall Mounting Pin-Long ........................... $3
Ford 4147-MPS 1941-47 Ford Firewall Mounting Pin-Short ........................... $3
GM Firewall Mounting Plugs
General Motors started using a plastic firewall mounting plug to attach the insulator
in the mid 1950s--1955 for Trucks and 1957 for Cars. These plugs are still used in
GM vehicles today.
GM 5500-MP 1955 to Present General Motors Mounting Plug ........................ $3
Street Rod Mounting Pins
With this new mounting pin kit, you can weld up your firewall mounting holes and
install any of our insulators for that “smoothie look.” Kit includes nine pin-sets and
installation instructions.
SRMP Street Rod Firewall Mounting Pin Kit ................................................. $34
Universal Mounting Pins
If your original firewall mounting pins are missing or damaged beyond repair, these
universal pins may be a solution. They are a plastic “Christmas tree” type pin that
will fit most 5/16 inch holes. Kit includes 10 pins.
UMPS-10 Universal Mounting Pin Set .............................................................. $20
Universal Wire Cap
A variety of car and truck manufacturers in the 1930s used a wire cap retainer to
mount the firewall insulator. These are still available in a Long (1/2 inch) and Short
(1/4 inch) variety and have a 1/2 inch button head that can be painted. To match the
firewall color.
UWC-MPL Universal Wire Cap Mounting Pin Long ....................................... $1
UWC-MPS Universal Wire Cap Mounting Pin Short ........................................ $1

1928-31 Ford Model A Catalog

Transcription

Similar documents

Elena Ford, Why haven`t you responded to my

Where you come to know.

Assembly Line - Model "A" Ford Foundation

Block Ford 400 “FMX”

1923 Ford Model T Huckster for Sale

wlfm-postcard starburst - Westland

Rik Fregia Welcome the newest members of the

ALL DAY - Early Ford V8 Club

NB-180 NEWBURG

Honorees Ford Motor Company`s 2010 Salute To Dealers award