Untitled

Transcription

Untitled
Graupner RADICATOR 4-WD 1 : 10 RTR
electric racing buggy
Order No. 90500.RTR
€ 149.95
Graupner RADICATOR 4-WD 1 : 10 ARTR
electric racing buggy
Order No. 90500
€ 69.95 The Graupner Radicator Electric 4-WD Racing
Buggy is the new beginner’s buggy from Graupner.
It is supplied 95% factory-assembled, and can be
ready for the track in a very short time. All you need
to complete the set is dry cells for the radio control
system.
• Factory-assembled Ready To Run 4-WD chassis
with four-wheel drive and two differentials (steel
bevel gear differentials)
• Electronic speed controller for proportional speed
control in forward / reverse (RTR only)
• High-quality two-channel 27 MHz AM RC system
with rotary steering control and steering servo,
speed controller and receiver factory-installed
and connected. The steering linkage is already
adjusted (RTR only).
• 7.2 V drive battery and matching charger are
included in the set as standard (RTR only).
• High-performance 540-size electric motor
• Four adjustable shock absorbers
• Telescopic articulated joints on all four wheels
• Factory-trimmed, pre-painted body shell, with
decals applied.
Graupner RADICATOR 4-WD 1 : 10 RTR
NITRO racing buggy
Order No. 90501.RTR € 239.00 The Graupner Radicator Nitro 4-WD is an entrylevel buggy, offering a great start in the world of
glow-powered off-road racing. It is supplied up to
95% pre-assembled, and can be completed ready
for running in a very short time. All you require to
complete the model is fuel and rechargeable batteries or dry cells for the radio control system.
• Factory-assembled Ready-to-Run 4-WD chassis,
with four-wheel drive system and two differentials
(steel bevel gear differentials)
• Two-speed automatic gearbox as standard
• High-quality two-channel 27MHz AM rotary-knob
RC system with factory-installed steering / throttle
servos and receiver, already connected. The steering and throttle pushrods are pre-adjusted.
• Reliable, powerful 15CPX 2.5 cc motor with integral pull-cord starter
• Four adjustable spring struts
• Telescopic articulated joints on all four wheels
• The set includes a refueling bottle, tools and a
glowplug clip with matching rechargeable battery
and charger
• Pre-trimmed, factory-painted polycarbonate body
shell.
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
GRAUPNER electric and glow-powered off-road models
Graupner Flash 4-WD 1 : 8 RTR
racing buggy
Order No. 90502.RTR € 359.00 Graupner Flash 4-WD 1 : 8 ARTR
racing buggy
Order No. 90502 € 189.00 The Graupner FLASH 1 : 8 4-WD Nitro Buggy
represents a low-cost route into the “Royal class” of
1 : 8 scale off-road buggies. It is supplied up to 95%
factory-assembled, and can be prepared ready for
running in a very short time. To complete the model
all that’s required is fuel and rechargeable batteries
or dry cells for the radio control system. There are
two variants, one the 90502.RTR described here, the
other the 90502 version without motor, radio control
system and servos; i.e. just the factory-assembled
chassis with pre-painted body shell.
• Ready-to-Run 4-WD chassis, completely factoryassembled, with four-wheel drive system and three
differentials (steel bevel gear differentials)
• High-quality two-channel 27MHz AM rotary-knob
RC system with factory-installed steering / throttle
servos and receiver, already connected. The steering and throttle pushrods are pre-adjusted
(RTR only)
• Reliable, high-performance 21CXP motor of approx. 3.5 cc capacity, with integral pull-cord starter
(RTR only)
• Set includes refueling bottle, tools and glowclip with
matching rechargeable battery and charger
(RTR only)
• Pre-trimmed and painted polycarbonate body shell.
Graupner ATV “NITROQUAD” 2-WD 1 : 10
scale RTR off-road fun model
Order No. 90503.RTR € 249.00 The Graupner “ATV” All-Terrain Vehicle - generally
known simply as a “Quad” - is supplied 95% factoryassembled, and can be prepared ready for running
in a very brief time. To complete the model all you
have to supply is fuel, plus dry cells or rechargeable
batteries for the radio control system.
• Ready To Run 2-WD chassis supplied factoryassembled, with rear differential (steel bevel gear
type)
• High-quality two-channel 27 MHz AM rotary knob
RC system with steering / throttle servos and
receiver factory-installed and connected. Steering
and throttle pushrods pre-adjusted.
• Powerful, reliable 15CPX motor, capacity approx.
2.5 cc, with integral pull-cord starter
• Two adjustable aluminium oil-filled shock absorbers on the front axle, already filled and installed
• One aluminium oil-filled shock absorber on the
swinging rear axle
• Set includes fuel filler bottle, tools and a glowplug clip with matching rechargeable battery and
charger
• Pre-trimmed, painted polycarbonate body shell,
plus driver figure and helmet
Team Losi Micro-T 1 : 36 RTR electric 2-WD
stadium truck
Team Losi XXX-CR 1 : 10 electric
competition buggy
Order No. B0230 € 99.95 Order No. A0032
The TEAM LOSI MICRO-T 1 : 36 RTR electric
stadium truck is the first full-function radio-controlled
replica of an off-road competition model to a scale of
1 : 36. It is supplied 100% factory-assembled, and is
therefore ready to run.
The TEAM LOSI XXX-CR 2-WD is a no-compromise 2-WD buggy with rear-wheel drive, fine-tuned
for competition work. It is supplied only in kit-form,
without electronics.
€ 378.50
• Complete kit with 2-WD rear-wheel drive system
• Variable-slip coupling and adjustable ball
differential
• Genuine team Losi off-road tyres and wheels
• Four Teflon-coated oil-filled shock absorbers, with
knurled nuts for accurate adjustment
• Lightweight CV articulated joints on the rear axle
• Clear polycarbonate body shell
• Factory-assembled, Ready To Run 2-WD chassis
with rear-wheel drive, differential and adjustable
slipper
• Electronic speed controller for proportional speed
control in forward / reverse
• High-quality two-channel TEAM LOSI 27 MHz AM
rotary-knob RC system with plug-in crystals and
micro steering servo, speed controller and receiver,
factory-installed and connected.
• 4.8 V / 150 mAh NiMH drive battery and matching
charger included in the set
• Powerful micro electric motor
• Four adjustable shock absorbers
• Eight AA-size dry cells for the transmitter and eight
AA-size cells for the battery charger supplied in
the set
• Factory-trimmed, painted polycarbonate body shell
with decals applied
• Independent suspension with double transverse
arms on all four wheels
• Available in green, blue and red
• Robust construction designed for easy
maintenance
• Combined receiver / speed controller unit
Additional features
• New exclusive “EA3” material used for most of the
injection-moulded parts
• Comprehensive adjustment facilities, such as
tracking, camber, running gear geometry etc.
• Robust construction for ease of maintenance
• Titanium right / left threaded trackrods
• New VLA transverse arms and wheel drivers on
the rear axle, with revised geometry
• New front and rear shock absorber bridges with
additional adjustment facilities
• All chassis screws countersunk
• Fully ballraced
• Rear-wheel drive with adjustable ball differential
• Special Team Losi EA-3 composite chassis,
rockers etc.
Team Losi Mini-LST 2 1:18 RTR Elektro
Monster Truck 4WD
Team Losi Muggy RTR 4-WD
racing monster truck
€ 749.00
Order No.. B0217
Order No. B0018
The Team Losi Mini LST 2 1 : 18 RTR electric
4-WD monster truck is the first 1 : 18 scale model
car equipped with Spektrum DSM technology. It is
supplied 100% factory-assembled, and is therefore
completely ready to run.
The TEAM LOSI MUGGY 1 : 8 scale RTR 4-WD
racing monster truck is supplied as a Ready to Run
model, complete with radio control system, three
servos and Mach 427 motor.
• Factory-assembled Ready-To-Run 4-WD monster
chassis with four-wheel drive, three differentials
and adjustable slipper
• Electronic speed controller for proportional control
in forward and reverse
• High-quality two-channel Team Losi Spektrum
DSM rotary-knob RC system with automatic
frequency selection, two micro steering servos,
speed controller and receiver, all factory-installed
and connected.
• 7.2 V Ni-MH drive battery and matching charger
included in the set
• Two powerful micro-size electric motors
• Four adjustable threaded oil-filled shock absorbers
with aluminium housings
• Set includes eight AA-size dry cells for the
transmitter
• Trimmed polycarbonate body shell, supplied
painted and decorated
• Metal bevel drive gears
• New electronics, new servo-saver
• Revised rockers and suspension components
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
TEAM LOSI off-road models
• Factory-assembled Ready To Run 4-WD chassis
with three differentials
• High-performance Mach 427 big-block motor
(approx. 4.5 cc) with integral Rotostart system and
optimised tuned pipe silencer
• XS-6 Synthesizer 40 MHz FM radio control system
with three high-power servos: one for throttle /
brake, two for steering
• 6.0 V NiMH receiver battery
• Complete Rotostart manual motor start system
• Glowplug clip supplied, suitable for “C-size”
dry cells
• Painted and decorated polycarbonate body shell
• 9.6 V rechargeable transmitter battery
Additional features
• Three sealed, adjustable differentials
• Four adjustable oil-filled shock absorbers (LST
size) of extra-large volume
• Fitted with high-quality ballraces throughout
• Extremely high-quality materials for durability and
superb parts fit
• Genuine Team Losi 1 : 8 Muggy King Pin low-profile competition tyres
Team Losi 8IGHT 4-WD racing buggy
Order No. K0800
€ 717.00 The Team Losi 8ight 4-WD competition chassis is
supplied in kit-form, without motor, tuned pipe and
electronics.
• Three variable, sealed differentials
• Four adjustable oil-filled shock absorbers with 4
mm piston rods and ultra-large volume
• Equipped with high-quality ballraces all-round
• Extremely high-quality materials for a perfect fit
and excellent durability
• Clear polycarbonate body shell
• Genuine team Losi 1 : 8 step-pin tyres
• New type of four-shoe competition clutch
Additional features
• Twin disc brakes, adjustable separately front
and rear
• Separate sealed boxes for battery and receiver
• New, almost central motor position for more agile
handling and better jumping characteristics
• Suitable for all current 3.5 cc motors and tuned
pipes
• Robust universal joints on all axles
• Sophisticated axle geometry offering wide-ranging
adjustment facilities and large suspension travel
• 17 mm wheel drivers
• Transverse stabiliser bars on front and rear axles
Team Losi 8IGHT RTR 4-WD racing buggy
Order No. B0081 € 779.00
The Team Losi 8IGHT RTR 4-WD competition
buggy to 1 : 8 scale is supplied as a Ready to Run
model, complete with DX-2 Spektrum radio control
system, two servos and Mach 427 motor.
• Factory-assembled Ready To Run 4-WD chassis
with three differentials
• High-performance Mach 428 Big-Block motor
(approx. 4.5 cc) with integral Rotostart system and
carefully optimised tuned pipe silencer
• DX-2 Spektrum radio control system with two
powerful servos for throttle / brake and steering
• 6.0 V NiMH receiver battery
• Complete Rotostart system (manual starter)
• Glowplug clip supplied, suits “C-size” batteries
• Polycarbonate body shell, supplied painted and
decorated
Additional features
• Three sealed adjustable differentials
• Four adjustable oil-filled shock absorbers of extremely large volume, with 4 mm piston rods
• Fully equipped with high-quality ballraces
• Extremely high-quality materials for durability and
perfect fits
• Genuine team Losi 1 : 8 Step-Pin tyres
• New type of four-shoe competition clutch
• Twin disc brake, adjustable separately for front
and rear
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
TEAM LOSI buggy and truggy models
Team Losi 8IGHT-T 4-WD Truggy
1/8 RTR
Order No. B0083
€ 779.00
The TEAM LOSI 8IGHT-T 4-WD Truggy is the first
choice for the new Truggy racing class. The RTR
model is supplied completely factory-assembled,
with a Mach 427 motor, two servos, DX 2.0 radio
control system, etc.
• Factory-assembled Ready to Run 4-WD chassis
with four-wheel drive and three differentials
• High-quality DX 2.0 Spektrum 2.4 GHz twochannel rotary knob RC system with steering /
throttle servos and receiver already installed and
connected. The steering and throttle pushrods are
already adjusted
• Powerful, reliable Mach 427 motor of around 4.5
cc capacity, integral Rotostart system and tuned
pipe silencer
• Four adjustable aluminium oil-filled shock absorbers of extremely large volume, already filled
• Six CV articulated joints for power transmission to
all four wheels; also fitted to central drive system
• Glowclip supplied, requires C-size batteries
• Factory-trimmed and painted polycarbonate
body shell
• 6.0 V NiMH receiver battery
Team Losi 8IGHT-T Truggy
Race Roller 4-WD 1 : 8 ARTR
Order No. A0802
€ 719.00
The Team Losi 8IGHT-T 4-WD Truggy is supplied
95% factory-assembled. The “Race Roller” is supplied as a rolling chassis, without motor and without
radio control system. The perfect Truggy model for
the ambitious competition driver.
• Factory-assembled Ready to Run 4-WD chassis
with four-wheel drive and three differentials
• Four adjustable aluminium oil-filled shock absorbers of extremely large volume, already filled
• Six CV articulated joints for power transmission to
all four wheels; also fitted to central drive system
• Clear polycarbonate body shell
Additional features
• Three sealed, adjustable differentials
• Fully equipped with high-quality ballraces
• Extremely high-quality materials for durability and
perfect fit of parts
• Genuine Team Losi 1 : 8 XTT tyres
• New type of four-shoe competition clutch
• Twin disc brakes, adjustable separately front
and rear
• Separate sealed boxes for battery and receiver
• New type of very central motor position for more
agile handling and better jumping characteristics
Yokomo MR-4BX 1 : 10 electric
4-WD competition buggy
Order No. 90405
€ 599.00 The YOKOMO MR-4BX 4-WD buggy is a no-compromise 4-WD buggy with four-wheel drive, fine-tuned
for competition work. It is supplied only in kit-form,
without electronics.
• Complete kit with permanent four-wheel drive via
two belts
• Adjustable-slip coupling, two adjustable ball differentials and freewheel on the front axle
• Supplied without off-road tyres; kit includes wheels
• Four Teflon-coated oil-filled shock absorbers, with
knurled nuts for accurate adjustment
• Articulated joints on all axles (four joints)
• Clear polycarbonate body shell
Additional features
• CNC-machined, blue-eloxided aluminium
components
• Robust material used for all injection-moulded parts
• Comprehensive adjustment facilities, such as tracking, camber, running gear geometry etc.
• Robust construction for ease of maintenance
• Titanium right / left threaded trackrods
• Extra-long transverse arms for maximum ground
clearance and optimum shock absorber
characteristics
• Carbon fibre shock absorber bridges with additional
adjustment facilities
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
YOKOMO off-road, touring and drift cars
Yokomo Drift Cars, 1 : 10 scale, 4-WD
Order No. 90410
Order No. 90411
Order No. 90414
Order No. 90415
Order No. 90417
Order No. 90422
A‘PEX FD3S
ORC 2005 Z33
HKS Altezza
BLITZ ER34
ADVAN IMPRESA GDB
HKS HIPER SILVIA
The new YOKOMO Drift Car series has been developed specifically for perfect drifting. The various
highly detailed body shells give the cars a great
appearance. The Drift Cars are available in kit
form only, excluding electronics.
• Complete kit with permanent four-wheel drive via
central articulated shaft
• Two low-maintenance bevel-gear differentials
• Fitted with Drift tyres as standard
• Four adjustable shock absorbers
• Two articulated joints on the front axle, two drive
joints on the rear axle
• Clear polycarbonate body shell with beautifully
detailed decal sheets
Additional features
• Eloxided wheel beds in various colours, with integral dummy brake discs
• All injection-moulded parts produced from robust,
high-quality material
• Comprehensive set-up facilities for toe-in, camber,
running gear geometry, etc.
• Robust construction for ease of maintenance
• Right / left threaded trackrods
• Long transverse arms with optimised running gear
geometry
Yokomo MR4-TCBD 1 : 10
electric touring car
Order No. 90400
€ 499.00
The MR-4TC BD MASAMI SPECIAL has been specifically developed to offer the ultimate performance
in this touring car class.
• Limited edition
• New chassis
• Super-precision bearing set
• Titanium screw set
• One-piece aluminium rocker support
• Titanium nitride coated shock absorber piston rods
• New shock absorber springs
• Team Bomber belts front and rear for ultra-low
friction
• Tubular, weight-optimised main shaft
• New rear shock absorber mounting
• Optimum handling
• Body shell, tyres, wheels and RC equipment not
included in the kit
Seite • Page • Page • • XXX
A‘PEX FD3S
Order No. 90410
€ 249.00
Seite • Page • Page • • XXX
BLITZ ER34
Order No. 90415
€ 249.00
Seite • Page • Page • • XXX
ORC 2005 Z33
Order No. 90411
€ 249.00
Seite • Page • Page • • XXX
ADVAN IMPRESA GDB
Order No. 90417
€ 249.00
Seite • Page • Page • • XXX
HKS Altezza
Order No. 90414
€ 249.00
Seite • Page • Page • • XXX
HKS HIPER SILVIA
Order No. 90422
€ 249.00
10
Hobao Hyper ST RTR 4-WD Truggy
Carisma Ford Focus WRC 4-WD GT14
Order No. 90046 90046.RTR
€ 512.00
Order No. 90302
€ 183.50
The HYPER ST RTR 4-WD Truggy is supplied 95%
factory-finished, complete with radio control system
and MAC 28 motor. It can be ready for the track in
just a few minutes.
Carisma Corvette 4-WD GT14
• Factory-assembled Ready-To-Run 4-WD chassis
with three differentials
• High-quality two-channel 27 MHz AM rotary-knob
RC system including steering / throttle servo and
receiver, pre-installed and connected. The steering
and throttle pushrods are already adjusted
• Powerful, reliable Hyper MAC 28 6P motor (approx. 4.5 cc capacity) with pull-cord starter
• Four adjustable oil-filled shock absorbers, filled
and installed
• Fuel bottle and tools included
• Pre-trimmed, multi-colour painted polycarbonate
body shell
• The comprehensive contents of the HYPER ST
RTR set enable the modeller to prepare it for
the track very quickly. Very few accessories are
required
Additional features
• Twin disc brakes, separately adjustable front and
rear
• Enclosed RC box for receiver and battery
• Bonded wheels and tyres, already fitted
• Tuned pipe and manifold, matched to the Hyper
MAC 28 motor
Hobao Hyper 8 RTR 4-WD racing buggy
Order No. 90331
€ 183.50
The Carisma 1 : 14 models are unique at this size.
These high-tech four-wheel drive touring cars and
rally cars are similar to 1 : 10 competition touring
vehicles, but represent a new 1 : 14 class. The prepainted body shells look great, and considerably
enhance the high-quality image of these models.
• Completely factory-assembled Ready to Run 4WD chassis with four-wheel drive, two differentials
and adjustable slipper
• Electronic speed controller for proportional speed
control in forward and reverse
• High-quality 27Mhz AM two-channel rotary-knob
RC system with plug-in crystals; steering servo,
speed controller and receiver installed and connected.
• 7.2 V / 1100 mAh drive battery with matching
charger
• High-performance 370-size 20-turn electric motor
• Four adjustable oil-filled shock absorbers
• Factory-trimmed, painted and decorated polycarbonate body shell.
• Independent suspension with double transverse
arms on all four wheels
• Robust construction for ease of maintenance
Carisma Golf GTI 2-WD M14
Order No. 90045.RTR
€ 449.00
Order No. 90218
€ 122.00
The HYPER 8 RTR 4-WD Racing Buggy is supplied
95% factory-finished, and can be ready for the track
in just a few minutes
The Carisma 1 : 14 2-WD Golf GTI is the ideal starting point in the 1 : 14 model class, as its simple,
ultra-robust construction provides exciting racing
with good reliability. The main features of this Golf
GTi are its intricately detailed body shell, high-quality radio control system and low price.
• Factory-assembled Ready to Run 4-WD chassis
with three differentials
• High-quality two-channel 27 MHz AM rotary-knob
RC system including steering / throttle servo and
receiver, pre-installed and connected. The steering
and throttle pushrods are already adjusted
• Powerful, reliable Hyper MAC 28 6P motor (approx. 4.5 cc capacity) with pull-cord starter
• Four adjustable oil-filled shock absorbers, filled
and installed
• Fuel bottle and tools included
• Pre-trimmed, multi-colour painted polycarbonate
body shell
• The comprehensive contents of the HYPER 8 RTR
set enable the modeller to prepare it for the track
very quickly
Additional features
• Twin disc brakes, separately adjustable front and
rear
• Enclosed RC box for receiver and battery
• Bonded wheels and tyres, already fitted
• Tuned pipe and manifold, matched to the Hyper
MAC 28 motor
• Robust front axle universal joints
• Fully ballraced
• Completely factory-assembled Ready to Run 2WD chassis with rear-wheel drive and differential.
• Electronic speed controller for proportional speed
control in forward and reverse
• High-quality 27Mhz AM two-channel rotary-knob
RC system with plug-in crystals; steering servo,
speed controller and receiver installed and connected
• 7.2 V / 700 mAh drive battery with matching charger and 8 AA-size dry cells
• Powerful R380 Sport motor
• Front and rear axle suspension
• Factory-trimmed, painted and decorated polycarbonate body shell
• Robust construction for ease of maintenance
• Combined receiver / speed controller unit
• High-grip profiled tyres bonded to wheels and
factory-fitted
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
HOBAO off-road models, CARISMA scale models
11
12
Mach 427 with pull-cord starter
Order No. ADYN0895
€ 199.00
Mach 427 with pull-cord starter, approx. 4.5 cc;
same motor as supplied in the LST2 / 8IGHT-T /
8EIGHT RTR kit.
Hobao MAC 28 6P
Order No. 90045.M
Hobao MAC 28 6P motor, approx. 4.5 cc, with
pull-cord starter
For many years UFRA tyres have been a byword for quality in
foam rubber tyres. Many top drivers all over the world place their
trust in the exclusive foam rubber used by UFRA, which is bonded to high-quality wheels in Switzerland and finish-ground with
great accuracy. Large numbers of weekend drivers also appreciate
the crucial advantage in terms of grip offered by Ufra tyres. With
immediate effect Graupner / GM-Racing is able to supply all the 1 :
10 and 1 : 8 scale on-road foam rubber tyres made by the Ufra company. The special high-grip rubber provides the crucial advantage
in terms of adhesion, especially in so-called »low-grip« conditions,
combined with reduced rates of wear. As a good starting combination we recommend 36° tyres front and rear for 1 : 8 cars in ambient
temperatures of 20° C. For 1 : 10 scale models 38° front and 40°
rear are a good starting point. Basically the softer compounds offer
higher grip and the harder compounds lower grip, but combined with
reduced rates of wear. At lower temperatures softer compounds are
preferred; harder compounds are better at higher temperatures.
UFRA tyres for 1 : 10 scale VG10 scale models, incorporating new, harder yellow 12-size spoked wheels with
universal-fit hexagon mounting sockets.
This new harder wheel replaces the previous 96350.XX types. The
new exclusive wheel is optimised for maximum adhesion even at
high temperatures, and gives good duration in finals; they also provide excellent true-running. All wheels are equipped with standard
commercial hexagon drivers, and can therefore be used on virtually
any 1 : 10 scale electric or glow RC car. The rear tyres are 30 mm
wide, the front tyres 26 mm wide.
Titan PRO »Team Special RS16« 16% 2.5l
Order No. 2644.2L
€ 20.50
Titan PRO »Team Special RS25« 25% 2.5l
Order No. 2645.2L
€ 21.90
After the exceptional success of Titan RS16 and RS
25 fuels we received many requests from competition drivers for an even »hotter« competition mix,
intended to provide absolute top performance and
even longer motor runs. So here it is: the Team
Special RS16 and Team Special RS25, designed
for competition purists who are capable of setting
up their motors perfectly, and extract maximum possible power from them. The low oil content of these
fuels - Order Nos. 2644.2L and 2645.2L - makes
them suitable exclusively for active competition use,
as they are produced using very special ingredients
and additives. Hobby and sport drivers should
certainly continue to use the previous fuels RS16,
Order No. 2642.2L, or RS25, Order No. 2643.2L,
which give extremely reliable results. Please refer
to the table to select the most suitable fuel for your
purpose. It is up to you to decide whether you are a
“weekend” driver or a true “racer”.
UFRA 1 : 10 front tyres
on 26 mm wide wheels
Seite • Page • Page • • XXX
Order. No. 96351.34F
Order. No. 96351.36F
Order. No. 96351.38F
Order. No. 96351.40F
Hardness 34°
Hardness 36°
Hardness 38°
Hardness 40°
€ 13.50/ Pair
UFRA 1 : 8 front tyres, on wheels
suitable for Mugen / Kyosho
Seite • Page • Page • • XXX
UFRA 1 : 8 front tyres, on wheels
suitable Serpent
Seite • Page • Page • • XXX
Order. No. 96352.34F Hardness 34°
Order. No. 96352.36F Hardness 36°
Order. No. 96352.38F Hardness 38°
Order No. 96353.34F Hardness 34°
Order No. 96353.36F Hardness 36°
Order No. 96353.38F Hardness 38°
€ 19.95/ Pair
€ 19.95/ Pair
UFRA 1 : 8 rear tyres, on wheels
suitable for Mugen / Kyosho
UFRA 1 : 8 rear tyres, on wheels
suitable for Serpent
Key to the table:
»Hobby«
Proven in competition use, reliable performance,
relatively high oil content, good durability, good
performance, adequate reserve for imperfect motor
settings.
»Racer«
Exclusively for competition work, maximum performance, increased rates of wear if motor is set
incorrectly; not suitable for hobby drivers!
RC-Car type
1:8 Buggy
1:8 On-Road
1:8 Monster Truck
1:10 On-Road
1:10 Off-Road
Motor size
3.5 cc
3.5 cc
3.5 cc - 7.5 cc
2.1 cc - 3.0 cc
2.1 cc - 3.0 cc
2642.2L RS16
Hobby
Hobby
Hobby
Hobby
Hobby
2643.2L RS25
Hobby
Hobby
Hobby
2644.2L RS16 Team
2645.2L RS25 Team
Racer
Racer
Racer
Racer
Racer
Racer
UFRA 1 : 10 rear tyres,
on 30 mm wide wheels
Seite • Page • Page • • XXX
Order No. 96351.25
Order No. 96351.36R
Order No. 96351.38R
Order No. 96351.40R
Order No. 96351.42R
Order No. 96351.44R
€ 11.50/ Pair
Hardness 25°
Hardness 36°
Hardness 38°
Hardness 40°
Hardness 42°
Hardness 44°
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Order No. 96352.34R Hardness 34°
Order No. 96352.36R Hardness 36°
Order No. 96352.38R Hardness 38°
Order No. 96353.34R Hardness 34°
Order No. 96353.36R Hardness 36°
Order No. 96353.38R Hardness 38°
€ 24.95/ Pair
€ 24.95/ Pair
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
Glowplug motors, fuel and UFRA tyres
13
14
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
GM disc wheels
JB tyre inserts, blue
1 : 8 scale tyre inserts, buggy
Order No. 96334 hard, pack of 4
€ 5.95
Order No. 96385 ultra-light,
thin, pack of 4
€ 7.95
Medium, yellow, 105 mm, pack of 4
Order No. 96390
€ 7.95
Order No. 96335 extra-hard, pack of 4
€ 5.95
Seite • Page • Page • • XXX
Order No. 96386 medium, pack of 4
€ 7.95
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
1 : 8 scale tyre inserts, buggy
Complete Sorex wheel
Complete Sorex wheel
Soft, orange, 105 mm pack of 4
Order No. 96391
€ 7.95
Order No. 96334.28
Sorex 28R wheels, Jb blue,
pack of 4, bonded
€ 27.00
Order No. 96334.36
Sorex 36R wheels, GM green, pack of
4, bonded
€ 29.95
Seite • Page • Page • • XXX
Glow motor accessories
Nitro Starter Set with glowplug clip,
matching charger, fuel bottle, practical
tools
Order No. 90504
€ 29.50
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Upgrade parts for
Team Losi 8ight
Upgrade parts for
Team Losi 8ight
Upgrade parts for
Team Losi 8ight
Aluminium front chassis strut
Order No. A4416
€ 29.95
Aluminium rear chassis strut
Order No. A4417
€ 21.80
17 mm wheel nut spanner, also fits the
LST series
Order No. B4604
€ 27.70
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
420 series King Pin tyres
LST / Muggy
Accessories for Team Losi
LST / Muggy
Accessories for Team Losi
LST / Muggy
Order No. B7210 tyres with inserts
€ 35.00
Order No. B7410 tyres with inserts,
bonded to wheels
€ 49.95
Wing set with fixings
Order No. B8150
€ 16.95
Titanium nitride differential drive gears
Order No. B3535
€ 39.95
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Accessories for 1 : 10
scale glow VG 10
Accessories for 1 : 10 scale
glow VG 10
Accessories for Team Losi
LST / Muggy
Accessories for Team Losi
Mini LST
Accessories for Team Losi
Mini LST
CP upgrade tuned pipe and manifold
for 1 : 10 scale, suitable for long races
Order No. 90043.111P
€ 53.00
Hobao GPX4 tuned pipe for 1 : 10 scale, for short and medium-length races
Order No. 90043.111
€ 23.60
Monster Super 1600 polycarbonate
body shell
Order No. B8021
€ 43.00
Viscous differential conversion set,
with two differentials, bevel gears and
fittings
Order No. B1250
€ 79.95
Mini-LST wheels, yellow, pack of 2
Order No. B0978
€ 6.60
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
RC car accessories, 1 : 10 and 1 : 8
15
16
DX-2.0 COMPUTER SYSTEM
XD-6 – 2.4 GHz iFS RACING SYSTEM
Order No. 3112.20
€ 198.00
Order No. 3125
€ 219.00
Technically superior, ergonomically optimised
version of the DX-2 Racing System which has been
successful all over the world. Exploits 2.4 GHz
SPECTRUM-DSM technology.
Ergonomically efficient, technically up-to-date
three-function radio control system utilising 2.4 GHz
Graupner IFS technology (Intelligent Frequency
Select) for the demanding pro-standard RC car and
racing boat operator.
Set contents:
DX-2.0 transmitter
SR 3000 RX receiver
Z 270 servo
Z 590 servo
Transmitter battery holder
Switch harness
DX-3.0 COMPUTER SYSTEM
Order No. 3121.30
€ 256.50
Technically superior, ergonomically optimised
version of the DX-3 Racing System which has been
successful all over the world. Exploits 2.4 GHz
SPECTRUM-DSM technology.
Set contents:
DX-3.0 transmitter
SR 3000 RX receiver
Z 270 servo
Z 590 servo
Transmitter battery holder
Switch harness
XD-4 – 2.4 GHz iFS RACING SYSTEM
Order No. 3122
€ 179.00
Ergonomically efficient, technically up-to-date
two-function radio control system utilising 2.4 GHz
Graupner IFS technology (Intelligent Frequency
Select) for the demanding pro-standard RC car and
racing boat operator.
For more information about the new Graupner IFS
system please refer to the 2007 Graupner New
Items catalogue, or visit www.graupner.de
For more information about the new Graupner IFS
system please refer to the 2007 Graupner New
Items catalogue, or visit www.graupner.de
SPEKTRUM DSM PRO 2.4 GHz-System
€ 249.00
Order No. 7090 DSM-PRO system for Graupner R-1
Order No. 7091 DSM-PRO system for FUTABA 3PK
Order No. 7092 DSM-PRO system for KO HELIOS
Order No. 7093 DSM-PRO system for SANWA /
AIRTRONICS M-8
• New software with transmission rate of just 3.0 ms
• The PRO receiver is significantly less sensitive to
static charge / discharge
• New smoke-grey case
• Telemetry-compatible
• 79 available frequencies = no waiting for a free
channel
• Sophisticated Fail-Safe technology for maximum
safety and security
• No crystals required
• Extremely high 4096-step resolution for superb
precision
• Simple to install:
SM 3001 Rx DSM PRO-series receiver
Order No. 7083
€ 122.00
SR 3500 DSM 3K-RX receiver
Order No. 7082
€ 132,50
• Extremely compact units
• Improved range
• High reliability
• Newly developed high-quality components for improved range and frequency stability
• The new software reduces the response time to
1.3 ms.
• Lower power supply voltage
• New aerial material
• Three channels (non telemetry-compatible)
• Compatible with the DSM-series and
the DSM-PRO-series
• Dimensions approx. 28 x 18.6 x 12.5 mm
• Weight approx. 5 g
7083
7082
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
Radio control systems and accessories
17
18
GM-GENIUS speed controllers
GM-GENIUS 40
Order No. 2896.G35 € 114.95
Operating voltage: 7.2...14.8V
(19.2V**)
Continuous current*: 40A
GM-GENIUS 50
Order No. 7165
€ 119.00
Operating voltage: 4.8...12V
Continuous current*:50A
GM-GENIUS 85
€ 179.00
Order No. 7166
Operating voltage: 4.8...14.8V
Continuous current*: 85A
GM-GENIUS 100
Order No. 7167
€ 285.00
Operating voltage: 4.8...12V
Continuous current*:100A
GM-GENIUS 50
GM-GENIUS 85
GM-GENIUS 95
GM-GENIUS 95
in heat-shrink sleeve GM-GENIUS 100
GENIUS 40 G3.5
Order No. 7165
Order No. 7166
Order No. 2898
Order No. 2898.12
Order No. 7167
Order No. 2896.G35
• New software specially designed for model cars and
boats, but also suitable for model aircraft.
• GM-Genius 85 and GM-Genius 100: splashproof
case (sensorless operation only)
• New special brake software provides several different braking characteristics
• Automatic detection of brushed + brushless motors
• Automatic detection of motors with Hall sensors
• Unprecedented standard of control and start-up
characteristics with sensorless brushless motors
• Ideal for competition use >= 5 min.
• Optimised heat-sink for improved cooling (supplementary water-cooling possible with GM-GENIUS
50, 85, 90)
• Four drive programs, simple to set:
Modes 1 - 3 with forward / neutral / brake mode for
competition use
Mode 1: for normal track conditions, with standard
NiMH low-voltage power-down and active special
brake software
Mode 2: for high-grip track conditions, for maximum
acceleration and braking, with lower NiMH low-voltage power-down.
Mode 3: for slippery track conditions, with LiPo lowvoltage power-down (optimised for four cells)
Mode 4: forward / neutral / brake / reverse, with
standard NiMH low-voltage power-down
• It is also easily possible to program all supplementary functions individually using the IDA programming system with Programmer, GMVIS-Commander
(V2005) or PC (Windows 2000 or XP)
• Programmable supplementary functions such as
automatic brake, maximum brake, maximum reverse
speed, ABS, speed limiting, soft-start, minimum brake, full brake, automatic throttle, power curve, motor
timing, current limiting, start-up current limiting, turbo
and different braking characteristics.
Programmer and servo tester for
GENIUS speed controllers
Order No. 2894.12
€ 84.95
• Two-line LCD screen
• Simple method of reading out and programming the
seventeen supplementary functions of GENIUS speed
controllers
• Two memory facilities for storing various speed
controller settings
• Servo test function for different cycle times: 3 ... 25 ms
• Automatic test facility for servos, e.g. for continuous
testing, display or demonstration purposes. Variable
test time for servo travel: 0.5 - 10 seconds.
• Receiver signal test function, indicates pulse width and
cycle
• Internal LiPo battery voltage measurement
• Voltage measurement range 0...30 V
• Dimensions: approx. 84 x 41 x 20 mm
• Weight approx.: 68g
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Seite • Page • Page • • XXX
Sensor adaptor lead, 10 cm
PC interface lead
Receiver lead, 20 cm
Order No. 2894.4
Windows 2000 or XP, GENIUS-ESC
Order No. 2894.6 € 24.10
For GENIUS 50, 80, 85, 95, 100
Order No. 2894.7 € 5.00
GMVIS Commander interface
lead GENIUS speed controllers
Receiver lead, 10 cm
€ 5.15
Sensor adaptor lead, 20 cm
Order No. 2894.8
€ 14.30
for GM EVO3 / Reedy / LRP motors
Order No. 2894.5
€ 17.40
For GENIUS 50, 80, 85, 95, 100
Order No. 2894.10 € 4.40
For detailed specifications please visit our Internet
set on www.graupner.de or see the 2007 Graupner
New Items catalogue: page 182 onward.
Accessories:
Power capacitor board, 7 x 470 μF / 16 V
Order No. 2894.16
Power capacitor board, 7 x 220 μF / 35 V
Order No. 2894.35
Seite • Page • Page • • XXX
GM-GENIUS 95 for 1 : 12
Order No. 2898.12 € 264.00
Operating voltage: 4.8...12V
Continuous current*: 95A
in heat-shrink sleeve, specially
for the 1 : 12 class (not shown)
GM-GENIUS 95
Order No. 2898
€ 266.00
Operating voltage: 4.8...12V
Continuous current*:95A
Upgrade heat-sink set
* brushless motors
** with opto-coupler, Order No. 2894.3, and a four-cell receiver battery
for GENIUS 50, 80, 85, 95, 100
Order No. 2894.11
€ 3.60
Seite • Page • Page • • XXX
Sensor adaptor lead,
approx. 5 cm
For GM EVO2 IFMAR SPEC /
Novak motors
Order No. 2894.9
€ 19.40
Seite • Page • Page • • XXX
Opto-coupler
for GENIUS speed controllers
Order No. 2894.3
€ 12.80
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
Brushless speed controllers and accessories
19
20
Sintered magnet, 13.5mm
for IFMAR brushless motors
Order No. 97213.1 € 21.80
Rotor spacer O-rings, 4 x 0.5 mm
4 x 1 mm, for adjusting rotor clearance
Order No. 97343 € 6.50
GM Pinnacle Diamond SP
Order No. 97157
• Lay-flat carbon brushes for greater speed
• Modified armature for more revs
• Extremely well cooled GM-Racing Cosmic case
• Latest ceramic WET magnets
• High-performance serrated carbon brushes with
loop for 1 - 5 battery charges
• Machine-wound
• Dynamically balanced armature
• Industrial ballraces
• Fixed timing: 24°
• Can be dismantled for easy maintenance
• Output approx. 200 W with Intellect 4200 World
Champion batteries
Sintered magnet, 15.1mm
for IFMAR brushless motors
Order No. 97214.1 € 21.80
Bonded magnet for IFMAR brushless motors
Order No. 97215.1 € 49.90
High-performance ballrace, 1/8” x 3/8”
Order No. 95203 € 4.00
Sintered magnet, 12.5 mm, for Brushless EVO3
Order No. 97243.1 € 19.95
BRUSHLESS EVO 3 motors
With the introduction of the new BRUSHLESS EVO 3 motors GM-Racing has succeeded in developing highly efficient motors
which set new standards in terms of reliability
and performance.
• Multiple extra-thick windings together with
an extremely low-loss design and sintered
neodymium magnets ensure enormous
power and high efficiency.
• A thicker shaft provides for better true-running of the magnets.
• Cooling slots and an integral cooling fan
keep the motors at reasonable temperatures even under the harshest competition
conditions. The result is that the GM-Racing
BRUSHLESS EVO 3 motors achieve constant levels of performance and efficiency
which can only be reached briefly by
brushed motors due to friction of the carbon
brushes and subsequent overheating.
Motor
Screw set for IFMAR brushless motors
Order No. 97215.2 € 3.95
• BRUSHLESS EVO 3 motors feature
sensors and a sensor connector, and can
therefore be operated in conjunction with
GM-GENIUS speed controllers with or
without sensors; it is possible to remove
the sensor leads for even greater reliability.
Numerous successes by our team drivers,
also in sensorless mode, such as the
A-Final victory in the first A-Final (run in
the rain) by Marc Fisher, demonstrate how
controllable these motors are when used
with GM-GENIUS controllers even under
difficult conditions.
• Variable sensor timing.
• High-performance ballraces for safe operation at high rotational speeds.
• The motors satisfy the DMC regulations,
EFRA rules and the ROAR regulations (as
of April 2007).
Ceramic ballrace, 1/8” x 3/8”
Order No. 95206 € 8.15
• Special extra-powerful plastic-bonded upgrade magnets are available as accessories: for competitions in which plastic-bonded
neodymium magnets are prescribed or in
which a different performance characteristic
is desired, the upgrade magnets, Order No.
97215.1, are fitted as a substitute for the
original magnets. These upgrade magnets
are a special development for GM-Racing,
and are around 30% more powerful than
bonded military spec. neodymium types;
they fit both the BRUSHLESS EVO 3 and
the BRUSHLESS EVO 2 motor. Rotational
speed with these magnets is around
10 – 15% higher than with standard sintered neodymium magnets, combined with
reduced current drain and slightly higher
maximum efficiency. For this reason these
magnets are also a particularly good choice
for slippery surfaces and 1 : 12 model cars.
Order No./ Price
BRUSHLESS
EVO 3 #5
97225/ € 99.00
BRUSHLESS
EVO 3 #6
97226/€ 101,50
BRUSHLESS
EVO 3 #7
97227/ € 99.00
BRUSHLESS
EVO3 #10
97230/ € 99.00
BRUSHLESS
EVO 3 #11
97231/€ 101,50
BRUSHLESS
EVO 3 #13
97233/€ 101,50
BRUSHLESS
EVO 3 #17
97237/€ 101,50
BRUSHLESS
EVO 3 #27
97243/€ 101,50
Nominal voltage
6V
6V
7.2 V
7.2 V
7.2 V
7.2 V
7.2 V
7.2 V
Operating voltage range
4.8 ... 7.4 V
4.8 ... 7.4 V
4.8 ... 7.4 V
4.8 ... 7.4 V
4.8 ... 7.4 V
4.8 ... 8.4 V
4.8 ... 12 V
4.8 ... 12 V
Revs. / Volt approx.**
8800
7700
6800
6100
5800
4600
4000
3000
No. of winds
3.5T
4T star or
7T triangular
4.5T
5.5T
6.5T
7.5T
17T
27T
Current drain at max.
efficiency approx. @ 7.2V
90 A
80 A
70 A
70 A
65 A
56 A
40 A
25 A
Current drain at max.
power approx. @ 7.2 V
170 A
150 A
135 A
125 A
122 A
104 A
80 A
50 A
Max. power at 7.2 V
600 W
575 W
540 W
480 W
475 W
410 W
300 W
210 W
Max. power at 6 V
400 W
380 W
360 W
340 W
340 W
280 W
210 W
150 W
Max. power at 4.8 V
270 W
260 W
250 W
230 W
220 W
200 W
150 W
110 W
Direction of rotation
R and L
R and L
R and L
R and L
R and L
R and L
R and L
R and L
No. of poles
2
2
2
2
2
2
2
2
Overall length approx.
70 mm
70 mm
70 mm
70 mm
70 mm
70 mm
70 mm
70 mm
Case length approx.
52.5 mm
52.5 mm
52.5 mm
52.5 mm
52.5 mm
52.5 mm
52.5 mm
52.5 mm
Diameter approx.
35.8 mm
35.8 mm
35.8 mm
35.8 mm
35.8 mm
35.8 mm
35.8 mm
35.8 mm
Free shaft length approx.
15 mm
15 mm
15 mm
15 mm
15 mm
15 mm
15 mm
15 mm
Output shaft diameter
3.175 mm
3.175 mm
3.175 mm
3.175 mm
3.175 mm
3.175 mm
3.175 mm
3.175 mm
Weight approx.
180 g
180 g
180 g
180 g
180 g
180 g
180 g
180 g
Recommended reduction ratio with
six cells
1:10 model
cars TW
1:7 - 1:10
1:10 model
cars TW
1:6,5 - 1:9,5
1:10 model
cars TW
1:6,0 - 1:9,0
1:10 model
cars TW
1:5,0 - 1:7,5
Off-Road
1:9 : 1:11
1:10 model
cars TW
1:4,0 - 1:7,0
Off-Road
1:8 - 1:10
1:10 model
cars TW
1:4,0 - 1:6,0
Off-Road
1:7 - 1:10
1:10 model
cars TW
1:4,0 - 1:6,0
Off-Road
1:7 - 1:10
1:10 model
cars TW
1:3,5 - 1:6,0
Off-Road
1:7 - 1:10
GM-GENIUS
95 or 100
GM-GENIUS
95 or 100
GM-GENIUS
95 or 100
GM-GENIUS
80, 85 or 95
GM-GENIUS
80,85 or 95
GM-GENIUS
80 or 85
GM-GENIUS
50
GM-GENIUS
50
Recommended controller
** No. of rotations can deviate in series. Subject to changes!
BRUSHLESS Dr. SPEED motors
With the introduction of the new Dr. SPEED
brushless motors GM-Racing has succeeded in
developing highly efficient motors which set new
standards in terms of reliability and performance.
Description
Order No. / Price
BRUSHLESS
DR. SPEED 9T
97259/ € 69.95
BRUSHLESS
DR. SPEED 12T
97262/ € 69.95
BRUSHLESS
DR. SPEED 17T
97267/ € 69.95
Nominal voltage
6V
6V
7.2V
Operating voltage range
4.8...7.4V
4.8...7.4V
4.8...7.4V
Revolutions / Volt approx. **
6500
5500
4000
Number of winds
9T triangular winding, corresponding
to 9T brushed or 5T
star winding
12T triangular winding, corresponding
to 12T brushed or
7T star winding
17T triangular winding, corresponding
to 17T brushed or
10T star winding
Current drain at max. efficiency,
approx., @ 7.2V
70A
65A
40A
Current drain at max. power,
approx., @ 7.2V
130A
125A
80A
Motor direction
R and L
R and L
R and L
Number of poles
2
2
2
Overall length in mm approx.
71
71
71
Case length in mm approx.
52.5
52.5
52.5
Diameter in mm approx.
35.8
35.8
35.8
Free shaft length approx.
15
15
15
Output shaft diameter, mm
3.175
3.175
3.175
Weight approx.
190g
190g
190g
Recommended speed controller
GM-Genius 95,
GM-Genius 100
GM-Genius 80,
GM-Genius 85
GM-Genius 50
• Multiple extra-thick windings together with
extremely low-loss design and sintered neodymium magnets ensure enormous power and high
efficiency.
• Thicker shaft provides for better true-running of the
magnets.
• Cooling slots and an integral cooling fan keep the
motors at reasonable temperatures even under
the harshest competition conditions.
• Brushless Dr. SPEED motors feature sensors and
a sensor connector, and can therefore be operated
in conjunction with GM-GENIUS speed controllers
with or without sensors. The tiresome sensor leads
can be removed for even greater reliability.
• Variable sensor timing.
• High-performance ballraces for high rotational
speeds.
• The motors satisfy the DMC regulations and the
EFRA (as of April 2007).
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
Brushless and brushed motors
21
22
TWIN CHARGER
Order No. 6409
€ 34.95
Low-cost plug-type charger, suitable for charging
Graupner transmitters, e.g. X-306 and 4 – 7-cell
NiMH batteries of around 600 – 2500 mAh, e.g. Order
No. 2539.
• For use with 12 ... 15 V car battery or 100 ... 230 V AC
• LED charge indicator for NiMH / NiCd or
LiPo batteries
• Delta-Peak cut-off detector for NiCd and NiMH cells
• Switchable Delta-Peak voltage: 5 mV, 10 mV,
20 mV per cell
• Selectable charge current
Mains input:240 V ~/50 Hz/15 VA
Transmitter battery output: 9.6 V approx. 250 mA
Ausgang für
Drive battery output:4 - 7 NiMH 4.8 - 8.4 V
approx. 900 mA with
Delta-Peak cut-off
MULTILADER 3 JST/TX/RXBEC
Order No. 6407
€ 20.50
• Versatile plug-type multi-charger
• Simultaneous charging of drive / flight pack, receiver battery and transmitter battery
• All three charge leads permanently attached to the
charger
• LED monitor for each charge output
• Increased output current for the drive / flight
battery
• Protective circuits guarding against short-circuit,
overload and reversed polarity at the charge output for the drive / flight battery.
• Drive battery with Japan connector:
6 - 8 NiMH / NiCd (7.2 V - 9.6 V) 400 - 800 mA
• Transmitter battery: 9.6 V approx. 250 mA
• Receiver battery with BEC connector:
4 - 5 NiMH / NiCd (4.8 V - 6 V) approx. 150 mA
LiPo-Charger 2 for two LiPo cells
Order No. 6452
€ 15.30
LiPo-Charger 3 for three LiPo cells
Order No. 6453
€ 15.30
6452
6453
ULTRAMAT 6
Órder No. 6425
€ 15.30
Low-cost Li-Io / LiPo plug-type compact chargers
with lightweight switch-mode mains PSU for
100 - 240 V A.C. power supply. LED charge
indicator and the proven constant current / constant
voltage charging procedure, ensuring that batteries
are 100% fully charged. The LiPo-Balancer plus,
Order No. 3064, must be used for optimum safety
and longevity of all LiPo batteries. The maximum
charge current is 1 A.
Specification
Operating voltage:
Battery types:
Charge current:
Dimensions approx.:
12 ... 15 V/1.5 A DC or
100 ... 230 V AC mains supply
1 ... 8 NiMH-/NiCd-cells
1 ... 3 LiPo-cells
0.2 A, 0.5 A or 1 A
121 mm x 116 mm x 43 mm
ULTRAMAT 15
Order No. 6415 German software € 116.00
Order No. 6415.67 English software € 119.30
Order No. 6415.69 French software € 119,30
ULTRAMAT 17
Order No. 6442** € 185.00
• Low-cost computer-controlled universal fast
battery charger
• With integral lightweight switch-mode mains PSU
for 100 ... 240 V and 12 DC input. This makes the
charger ideal for all “mobile” usage and also for
use abroad (USA / Japan).
• Automatic charge, discharge, capacity measurement, battery maintenance and balancing program
for NiMH and NiCd batteries as used in modelling.
• Ultra-simple to operate with a clearly arranged
program structure and four buttons
• High-contrast two-line LCD screen with blue
backlighting for simultaneous display of all relevant
parameters.
• Charge / discharge facilities for NiMH, NiCd, LiPo
and lead-acid batteries
• Delta-Peak cut-off detector for NiMH and NiCd
cells with variable Delta-Peak voltage, guaranteeing reliable full charging to 100% capacity.
• Capable of charging single cells: ideal for glow
energizer batteries and for cell selection
• LiPo and Li-Io cells are charged using the constant
current / constant voltage method. Declining
current curve when the final charge voltage is
reached; automatic charge termination.
• Lead-acid charge programs with optimised charge
curve, discharge facility, variable discharge current
for determining battery capacity and residual
capacity.
• Protected against short-circuit, overload and reversed polarity.
• Ready for use.
• Dimensions approx. 168 x 164 x 55 mm
• Weight excl. mains lead approx. 770 g
** Illustration does not show current model
Order No. 6415
Order No. 6442
Operating voltage
12 ... 15 V/ 12 A DC
or 100 ... 240 V AC
12 ... 15 V/ 12 A DC
100 ... 240 V AC
Charge facilities
1 ... 14 NiMH/ NiCd cells
1 ... 5 LiPo cells
1 ... 6 lead-acid cells
1 ... 25 NiMH/ NiCd cells
1 ... 10 LiPo cells
1 ... 12 lead-acid cells
Charge current
0.1 A ... 8 A with mains PSU
(max. 50 W)
0.1 A ... 8 A im 12 ... 15 V
DC power (80 W)
0.1 A ... 10 A with mains PSU
(max. 120 W)
0.1 A ... 10 A im 12 ... 15 V
DC power
Discharge current
0.1 ... 5 A (20 W)
0.1 ... 5 A (50 W)
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
Battery chargers
23
24
FREQUENCY SPECTRUM SCANNER AX 700
Order No. 7099 for the 40 / 41 MHz band
€ 89.95
The AX 700 FREQUENCY SPECTRUM SCANNER
represents a sophisticated method of monitoring a
complete frequency band or one selected spot frequency. The FREQUENCY SPECTRUM SCANNER
has an extremely high sensitivity of -102 dB, making
it capable of picking up and displaying even very
weak interference signals.
Specification:
Operating voltage2.2 ... 3.3 V
Current drain approx. 8 mA
Sensitivity
–102 dB
Temperature range –5 ... +40° C
Aerial length approx. 1000 mm
Dimensions approx. 78 x 47 x 11,5 mm
Weight approx.
40 g
DS8822
Switch-mode mains PSUs
Order No. 6449
13,8 V/8,5 A
€ 37.50
Order No. 6451
13.8 V/ 30 A
€ 89.95
• Reasonably priced
• Electronic switch-mode mains power supply units
for low residual voltage and light weight
• Compact dimensions
• The ideal choice as power supplies for battery
chargers
LiPo-Balancer plus
Order No. 5180
€ 163.00
Order No. 3064
€ 30.70
Digital high-speed servo. Race-proven metal
gearbox, metal output shaft, twin ballraces and a
modified precision-made high-power bell armature
motor with heavy-duty electronics provide outstanding all-round performance and high output torque.
The ideal choice for 1 : 8 scale off-road RC cars
• The circuit balances the individual cells with a voltage difference of around 0.01 V during the whole
of the charge process, or even when the battery is
not on charge.
• For maximum safety, the circuit cuts off the charge
process if the voltage of one cell rises to 4.26 V,
thereby preventing individual cells being overcharged and suffering permanent damage.
• The circuit cuts off the discharge process if the
voltage of one cell falls below 3.0 V.
• Short-circuit protection at voltages below 2.0 V
• Power-down energy-save mode at voltages
below 2.75 V.
• Maximum charge / discharge current: 10 A
• Dimensions approx. 85 x 45 x 18 mm
• Weight approx. 70 g
Torque approx. / Ncm
105
Holding power approx. / Ncm220
Transit speed approx. / sec./40° 0.055
Weight approx. / g
65
Dimensions approx. / mm
40 x 21 x 40
DS8077
Order No. 5149.LOSE
€ 19.45
A standard-size digital servo for the price-conscious
modeller. The main output shaft of the servo is ballraced, and is driven by a robust gearbox consisting
of tough plastic gears. Wide output gears ensure
high maximum load capacity and a long effective
life. This digital standard servo offers an above-average standard of quality in its price class.
Torque approx. / Ncm36
Holding power approx. / Ncm
80
Transit speed approx. / sec./40° 0.12
Weight approx. / g
40
Dimensions approx. / mm38 x 19 x 37
LiPo Balancer 6 Plus
Order No. 3065
€ 38.95
• Pro-standard charge / discharge protection
for 1 … 6 cells
• Overcharge protection: cuts off charge process at
approx. 4.26 V
• Increased balancing current for large battery
packs: up to 0.3 A
• Balances voltage differences of approx. > 0.01 V
• The circuit cuts off discharge processes at
around 3 V
• Short-circuit protection at voltages below 2 V
• Power-down energy-save mode at voltages below
2.75 V, or when the battery is properly balanced
• Two LiPo Balancer 6 plus units can be wired in
series for charging 7 … 12 LiPo cells
• Maximum charge / discharge current: 10 A
• Dimensions approx. 120 x 71 x 24 mm
• Weight approx. 105 g
6451
6449
Specification
Order No.
Order No.
Order No.
6449
6451
Input voltage
100~120 V AC or
220~240V AC
220~240V AC
Output voltage
13.8 V DC
13.8 V DC
Max. continuous output current
8.5 A
30A
Dimensions (L x B x H) approx.
155 x 92 x 86mm
309 x 195 x 120 mm
Weight approx.
405 g
2030 g
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
RC accessories, servos, mains PSUs and balancers
25
26
MEGA GMVIS-treated
World Champion batteries
• World Champion cell from Intellect
• Even lower internal resistance
• New MEGA GMVIS process provides 5% improvement in internal resistance compared with previous
GMVIS process.
• Continuous currents up to 100 A possible
• Recommended Delta-Peak cut-off voltage:
10 mV / cell
• Battery packs are selected and MEGA
GMVIS-treated
98868.6
2493.5
98868.6M
98868.7BEC
98868.6ST
98868
NiMH Intellect
1N-4200 World
Champion
Order No. 98944
Single cell
2493.5BEC
Intellect high-performance drive batteries and receiver batteries
Capacity
Ah
Cell count
Voltage V
Order No.
Type designation
Weight g
approx.
Dimensions
mm approx.
1.4
1
1.2
98868
1N-1400 2/3 A NiMH
24
29 x D17
6
7.2
98868.6
6N-1400 2/3 A NiMH
144
102 x 32 x 17
Mini-connector
6
7.2
98868.6M
6N-1400 2/3 A NiMH
142
68 x 47 x 17
Mini-connector
6
7.2
98868.6ST
6N-1400 2/3 A NiMH
144
87 x 35 x 17
BEC connector
7
8.4
98868.7BEC
6N-1400 2/3 A NiMH
170
119 x 32 x 17
BEC connector
5
6.0
2493.5
5N-1400 2/3 A NiMH
126
85 x 32 x 17
JR
5
6.0
2493.5BEC
5N-1400 2/3 A NiMH
126
85 x 32 x 17
BEC
1.4
NiMH Intellect 1N4200 WC
GMVIS-treated/
selected
Order No. 98944.S
Connector
type
NiMH MEGA X
Pack
Intellect 6N-4200
WC GMVIS
Order No.
98944.6X
LiPo 2/1500
Order No. 7638.2 Voltage:
Capacity:
Max. discharge current:
Weight:
Connector:
98901
€ 39.50
7.4 V
1500 mAh
15 A
88 g
BEC
Seite • Page • Page • • XXX
LiPo 2/1500
Order No. 7638.2G35
Voltage:
Capacity:
Max. discharge current:
Weight:
Connector:
LiPo 2/5000
Order No. 7665.2
€ 170.50
98902.7
98902.6
98902.4
98902
GM high-performance drive batteries
Capacity
Ah
Cell countl
Voltage V
Order No.
Type designation
Weight g
approx.
Dimensions
mm approx.
Connector
type
4.0
6
7.2
98901
GM Power Pack NiMH 6N-4000
420
136 x 48 x 24
JST/G2
4.5
1
1.2
98902
GM Power NiMH 1N-4500
71
44 x D23
4
4.8
98902.4
GM Power Pack NiMH 4N-4500
304
98 x 48 x 24
6
7.2
98902.6
GM Power Pack NiMH 6N-4500
451
142 x 48 x 24
G3.5
6
7.2
98902.6ST
GM Power Pack NiMH 6N-4500
453
142 x 48 x 24
JST/G2
7
8.4
98902.7
GM Power Pack NiMH 7N-4500
530
166 x 48 x 24
G3.5
G3.5
NiMH Mega XXL
Pack
Intellect 4N-4200
WC GMVIS
Order No.
98944.4XXL
NiMH Mega XXL
Pack
Intellect 5N-4200
WC GMVIS
Order No.
98944.5XXL
NiMH Mega XXL
Pack
Intellect 6N-4200
WC GMVIS
Order No.
98944.6XXL
Caution with GRAUPNER LiPo batteries: max. final charge voltage is 4.2 V / cell • max. final discharge voltage is 2.5 V / cell
Seite • Page • Page • • XXX
98902.6ST
NiMH Mega XL
Pack
Intellect 6N-4200
WC GMVIS
Order No.
98944.6XL
High-performance LiPo battery for 1 : 10 scale RC
cars. This LiPo pack gives your model car unprecedented acceleration and top speed, while the
capacity of 5 Ah provides enormously long running
times
Caution: you must use a LiPo-capable speed controller or the deep-discharge guard, Order No. 6495,
and a LiPo-capable battery charger in LiPo mode.
Voltage:
7.4 V
Capacity:
5000 mAh
Max. discharge current: 100 A
Weight:260 g
Connector:
G3.5
€ 31.40
7.4 V
1500 mAh
15 A
88 g
G3.5
Seite • Page • Page • • XXX
LiPo 2/2100
Order No. 7643.2
€ 82.00
Voltage:
7,4 V
Capacity:2100 mAh
Max. discharge current: 50 A
Weight:
116 g
Connector:
G3.5
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de • www.gm-racing.de
Drive batteries, receiver batteries
27
GM N07
GM-Racing GmbH • Postfach 1242 • 73220 Kirchheim/Teck • Germany • Tel.: 0049-7021/722-0 • Fax: 0049-7021/722-200
All prices are recommended retail prices including statutory VAT.
For detailed information regarding individual products please refer to the GRAUPNER 2007 New Items catalogue,
or visit www.graupner.de • www.gm-racing.de
Modifications and availability reserved. Goods are supplied only via specialist model shops, where you can obtain valuable expert advice.
Please contact us for details of your nearest retail supplier. We accept no liability for printing errors.
Printed in Germany