Product presentation JFX200-2513

Product Guide
Mimaki Europe B.V.
Industrial Products
18-11-2014
Ver1.3EU
Terms of use
•
•
•
•
The contents of this presentation are intended only for Mimaki authorized
resellers. Authorized persons are not permitted to distribute, copy or
change this presentation without explicit approval of Mimaki Europe B.V.
Contents and technical explanations in this presentation are based on the
test results achieved at Mimaki at the time of testing and are not a
guarantee for performance. Substrates should be tested beforehand.
In addition, the contents in this presentation do not lead to any legal
obligations from Mimaki and Mimaki does not take any responsibility.
Please verify in advance whether your intended prints will result in
sufficient quality.
Contents of this presentation are subject to change without prior notice for
improvement. Compositors errors reserved.
Mimaki Europe B.V.
Industrial Products
Product Information
• A new member, JFX200-2513, joined the JFX family
• JFX200-2513
• The low entry model of the JFX line,
having the high quality print technology
of the Mimaki JFX product line
Machine
Width
Depth
Height
Weight
JFX200-2513
4,400mm
2,250mm during installation
2,450mm during operation
1,250mm
650kg
JFX500-2131
4,100mm
4,462mm
1,490mm
1,353kg
Mimaki Europe B.V.
Industrial Products
3
Product Information
• New layout
Print area
2100mm
Head configuration
159mm
JFX500-2131
3100mm
106mm
JFX200-2513
1300mm
2500mm
Mimaki Europe B.V.
Industrial Products
4
JFX200-2513 Features
•
The balance between quality and speed with the technology from the JFX
series
•
•
•
•
High quality by Mimaki’s image quality control technology including MAPS2 and
variable dot printing
High productivity is accomplished by the new print head technology and high speed
curable ink
Able to print full-Color and Clear ink in one job production
•
High productivity printing of, fast and beautiful clear finish, productions with less
dust attachments
Easy operation, by an operator friendly new design
•
•
Mimaki Europe B.V.
Industrial Products
Operation panel, Vacuum valve and Ink system are all located on the front side
Most operations such as operating machine, switching vacuum ON/OFF,
replacement of inks and setting of media can be done at the front of machine
Layout pins are helpful for setting the media at the origin
5
JFX200-2513 Features
•
•
•
Reliability accomplished by stable printing
•
•
Ink circulation system prevents white ink from settling
Nozzle recovery function allows for continuous printing even if nozzles
are clogged by using other normal nozzles
Environmentally-friendly LED-UV curing light
•
•
Long life UV lamps with low power consumption
Eliminating risks associated with heat such as
media deformation and media discoloration
Ink supply system
•
•
Mimaki Europe B.V.
Industrial Products
The low cost ink supply system
The ink bottle (1L) is directly usable
6
JFX200-2513 Features
•
•
•
•
Print speed
•
•
•
With the CMYK configuration: maximum 25m²/h
With the CMYK plus White configuration: maximum 12.5 m²/h
With the CMYK plus White and Clear configuration: maximum 12.5 m²/h
New table with internal honeycomb structure for extra stability
•
An reduction of the weight by unifying vacuum area
Rack and pinion feeding method is implemented
•
Stable transportation system
The installation time is reduced
•
Mimaki Europe B.V.
Industrial Products
New integrated packing
7
Environmentally conscious LED-UV curing unit
•
•
•
•
•
Little VOC (Volatile organic compound), no ozone production
•
Little VOC and less odor, no special ventilation systems are required
Energy-efficient and cost reduction
•
•
Generates less heat and turns on only when needed
Reduction of the total cost by less energy consumption
The reduction of the heat impact
•
•
•
The material reaches an temperature of 70⁰C, when using metal halide lamps, causing media deformation
LED-UV enables to print on cheaper media
No need for special expensive ventilation and installation costs
The improvement of production circumstances
•
The long-life LED UV lamp (approx. 5000 hours), which needs less maintenance, permits the increase in
productivity. *The life-time of the metal halide lamp is about 700 hours
The LED UV lamps turn on and off instantly
•
•
Mimaki Europe B.V.
Industrial Products
LED UV lamps are ready to be used immediately, directly after the printer is turned on
An metal halide lamp requires warm up and cool down time
8
Configuration
Basic Configuration
Corresponds with PS,EPS,TIFF,BMP,JPEG, etc.
&
Output / Installation
USB 2 0
5m (15ft) cable is recommended
Recommended hardware specifications
CPU:
Memory:
HDD:
I/F :
ODD:
OS:
Monitor:
Mimaki Europe B.V.
Industrial Products
Core i5 3.1GHz
4GB
500GB
USB2.0 4 ports or more
DVD-ROM
Windows7 / 32bit / Pro
1366x768
9
Introduction of MCC
•
•
•
•
MCC, Mimaki Clear Control
MCC is the new function added to the JFX200-2513
•
MCC enables to do full color printing and Clear printing at the same
time
Advantage1, Reducing the attachment of dust
•
•
Previously, dust attached easily to the surface of materials
during clear ink printing
MCC reduces the risk that dust could attach
Advantage2, Easier process
•
•
Mimaki Europe B.V.
Industrial Products
In the past it was needed to divide the printing process into 2 stages:
clear-printing and full color printing
MCC enables to print these together in 1 go and reduces the
production time
10
Application of clear ink
• 3 types of finishes
• Glossy finish
• Matte finish
• Emboss finish
• Various appearances
• Overall print
• Partial Print
• Texture print
Mimaki Europe B.V.
Industrial Products
11
New developed MCC
•
•
CMYK: LH-100 or LUS-150 are available
Clear ink: LH-100 is available and working with LUS150 and LH100
•
•
Printing with clear ink will reduce the flexibility of the print with LUS150
Please test the print quality on fore hand
No clear Ink
Partial
texture Print
Clear Glossy printing
Mimaki Europe B.V.
Industrial Products
Partial Gross Print
and matte Print
12
Head placement / Print speeds
•
•
Two print heads are aligned in stagger configuration
Simultaneous printing of color and white is attained by the white ink model
• CMYK
M K C Y
High Speed
300x450HQ 6Pass
Bi/N
25sqm/hr
(268.8 sq.ft./hr)
MMKK
Production
CCYY
*8boards/hr (4‘ x 8 ‘ )
600x600 8Pass
Bi/Hi
18sqm/hr
(193.5 sq.ft./hr)
*6boards/hr (4‘ x 8 ‘ )
600x900 12Pass
Bi/Hi
12sqm/hr
(129.0 sq.ft./hr)
*4boards/hr (4‘ x 8 ‘ )
Standard 1200x1200 16Pass
3.4sqm/hr
(36.5sq.ft./hr)
Uni/Hi
High Quality
Scan direction
Mimaki Europe B.V.
Industrial Products
0
*1boards/hr (4‘ x 8 ‘ )
5
10
15
20
25
30
m²/h
13
Head placement / Print speeds
• CMYK + White + Spotcolor (Clear)
M K C Y W Cl
High Speed
300x450HQ 12Pass
Bi/N
12.5sqm/hr
(134.4sq.ft./hr)
*4boards/hr (4‘ x 8 ‘ )
MKC
Y
Production
600x600 16Pass
Bi/Hi
9.0sqm/hr
(96.7sq.ft./hr)
*3boards/hr (4‘ x 8 ‘ )
ClClWW
Standard
High Quality
600x900 24Pass
Bi/Hi
6.2sqm/hr
(66.6 sq.ft./hr)
*2boards/hr (4‘ x 8 ‘ )
1200x1200 32Pass
Uni/Hi
1.7sqm/hr
(18.2sq.ft./hr)
*0.5 boards/hr (4‘ x 8 ‘ )
Scan direction
0
2
4
6
8
10
12
14
16
18
20
m²/h
Mimaki Europe B.V.
Industrial Products
14
MAPS 2 (Mimaki Advanced Pass System)
•
With MAPS2, both feeding stripes and color changes are reduced
•
•
•
•
Mimaki Europe B.V.
Industrial Products
MAPS: ON
MAPS 2 eliminates banding by dispersing ink
drops between the passes
This technology is improving the print quality,
when printing in high productivity modes and
the uneven print density at solid color area’s
are reduced
MAPS: OFF (Normal)
By printing in [AUTO] mode of MAPS2, the
condition of MAPS2 is automatically selected
for every print mode
The print speed does not change by using MAPS2
15
High Quality Printing
• The Variable dot
• The variable dot, printing in 3 different
dot sizes of small, medium and large
• Realizes a high image quality printing
with the smooth gradation
• Small characters sharp without
Variable dot
granular appearance
Normal dot
Mimaki Europe B.V.
Industrial Products
16
Print on the thick and heavy media
•
•
Printing on the substrate of up to 2 inches (50mm) thick
The maximum loadable weight of substrate is up to 110lb (50kg/m²)
Scan Direction
Less than 2mm of head gap
is recommended
Media
•
The thickness of media
should be less than 50mm
About the head gap
•
•
•
Mimaki Europe B.V.
Industrial Products
The gap between the head and the substrate should be less than 2mm
If the gap is set wider than 2mm, the ink drop tends to become mist before it reaches onto the substrate
Furthermore, if the gap is to wide, the reflected light from the UV curing lamp increases. This leads to a cause of an
error of the ink droplet onto the substrate or the nozzle clogging, because the reflected light may increase the
viscosity of the ink mist
17
Vacuum area
•
Standard equipped with an Vacuum unit
•
The vacuum is controlled, On or Off, via the operation panel
Vacuum area is divided in X direction
•
Depending on the media size, open or close the valve, to control the suction area
525mm
•
Valves
Mimaki Europe B.V.
Industrial Products
1,300mm
V1
Front
2,500mm
775mm
Divided in X direction
V2
Origin
18
Layout Pins
•
•
•
•
Delivered with the layout pins
•
Place able at 8 inches (200mm) apart in stagger configuration, at the front of the table
Easy to place the substrate at the origin
•
Just set the layout pins and position the substrate against the layout pins
The scale allows for the accurate setting of the media.
When using layout pins, use a substrate with thickness of minimum 3mm or more. The
height of the pin is 3mm
Layout pins
Mimaki Europe B.V.
Industrial Products
Ten pieces are supplied with
the machine
19
Reliable printing
•
Automatic measurement of media
thickness
•
•
•
•
No need to measure the thickness by hand and
reducing operator interactions
The gap pin on the left side of the carriage
automatically measures the thickness of media
When needed, the head gap can also be set
manually by steps of 0.1mm
Media Jam Censor
•
•
Mimaki Europe B.V.
Industrial Products
Preventing print heads from hitting the media
When the media height is set incorrectly or the
media is deformed, the sensor hits the media
and the carriage stops to protect the print
heads
20
Nozzle recovery system
•
The nozzle recovery system
•
•
•
•
When nozzle clogging occurs and it’s not recoverable, the other working nozzles can be used instead
Up to 10 nozzles can be registered per 1 nozzle line
Does not chance the printing speeds
For the lowest number of printing passes, of the printing mode, the Nozzle recovery function is
disabled
The nozzle recovery workflow
Nozzle
clog
occured
Setting nozzle
recovery
Mimaki Europe B.V.
Industrial Products
Resume operation
Operation Stop
Operation continues
Service intervention
Maintenance starts
21
New ink supply unit
The lights shows the remaining amount of inks
•
User friendly design
•
•
•
Mimaki Europe B.V.
Industrial Products
Easy replacement of ink bottles
The lights indicates, when the ink has run out for smooth replacement
UISS (Uninterrupted Ink Supply System) works when the 4C ink set is used
22
New ink supply unit
• Makes it easy to replace the ink bottle by just taking
off the bottle and insert a new ink bottle (1L) directly
to the unit
Special cap
Ink bottle
Mimaki Europe B.V.
Industrial Products
Cap mounting jig
Set a special cap
Screw the cap till
the arrows on the
jig match
23
MCT, White ink circulation system
•
•
•
•
Preventing the settlement of pigments of the white ink in the line
Creating an stable ink supply system
This reduces the amount of waste ink which leads to the reduction of the ink
cost.
MCT works when white ink set is installed
▼
Mimaki Europe B.V.
Industrial Products
Conventional white ink line
24
LED_UV ink & its substrate/application
• The choice of two different ink types
LUS-150
Color
M
C
Y
K
LH-100
W
Cl
M
C
Y
K
W
Cl
Feature
・Flexible enough to fold
・The ink is hard to crack
・The media is hard to deform after printing
・Good media compatibility
・The ink film is hard
・Hard to get scratched
・High solvent resistance
・Less tackiness
Application
・Signage, decoration on soft material and
material which requires post process
・Inddorpanel, decoration on small goods,
and name plate
Mimaki Europe B.V.
Industrial Products
25
LED_UV ink & its substrate/application
4-color
M M K K C C Y Y
Speed-oriented 4C ink set.
UISS works in each color.
4-color + White
M K C Y M C W W
4-color+Clear & White
By using white ink, the original color of the ink is reproduced on
transparent of colored material.
UISS works in Magenta and Cyan lines
Clear ink can express gloss finish or emboss finish
M K C Y Cl Cl W W
＊Clear ink of LH-100 is used in combination with LUS-150
Mimaki Europe B.V.
Industrial Products
26
LED_UV ink & its substrate / application
Color gamut
5
Outdoor durability
4
Scratch
resistance
LUS150
3
Adhesiveness
(Media
compatibility)
2
Solvent
resistance
(Ethanol)
1
The strength of LH-100
・Fine scratch and solvent resistance
Flexibility：About100% (LH-100 does not strech)
・Less tackiness, does not set off
The weakness of LH-100
・The ink film tends to be cracked by folding or cutting
0
Scratch
resistance
(Pencil)
Flexibilit
y
Offset
Folding
Tackiness
Mimaki Europe B.V.
Industrial Products
The strength of LUS-150
・The ink is hard to be cracked because LUS-150 is flexible
Flexibility:About 150%)
・Adhesiveness is better than LH-100
The weakness of LUS-150
・The scratch and solvent resistance is less then LH-100
Bad:0⇔Good:5
27
Adhesiveness (Media compatibility)
• Multiple LED-UV inks for a wide range of applications
Material
PET
Media
LH-100
LUS-150
K Series PET Film HK31WF
○
○
DuPont Teijin U292W
×
○
Lexan
○
×
Takiron
○
△
Plexiglas
△
△
Mimaki SPC-0706
○
○
Forex
△
△
PC
Acrylic
PVC
Evaluation standards:
○:Excellent to Good
△:Medium (The ink may peels off by cross cutting)
×:Not suitable(The ink peels off easily by tape)
・The test above was conducted based on the internal standard.
The results are no guarantee of the performance.
Mimaki Europe B.V.
Industrial Products
28
Scratch resistance & flexibility
• Multiple LED-UV inks for a wide range of applications
LH-100
LUS-150
LUS-200
Nail Scratch
No scratch
Mimaki Europe B.V.
Industrial Products
Nail Scratch
Scratched
LH-100
LUS-150
Pencil hardness
5H
3H～H
flexibility
100%
（Not flexible）
150%
（Stretches a half）
29
Solvent resistance - Rubbing Test
• Multiple LED-UV inks for a wide range of applications
LH-100
LUS-150
○
○
○
(Density:100%)
△*1
(Density:30%)
IPA (100%)
○
○
Xylene (100%)
○
○
Water
Ethanol
*1: Density in which the trace of the rubbing remains.
Evaluation standards：○：Attached, △：Peels off with low density, ×：Peels off easily
Evaluation method：Evaluate holistically by the test results of primary color, secondary color, and tertiary color.
Mimaki Europe B.V.
Industrial Products
30
Solvent resistance - Dipping test
• Multiple LED-UV inks for a wide range of applications
• When printing on less adhesive media, UV ink tends to peel off
by the penetration of water or solvent from the print edge
LH-100
LUS-150
Water
×
○
Hot water (60℃)
×
△*1
Ethanol (100%)
○
××*2
Xylene (100%)
△
××*2
*1: Air bubbles get in/ 2: Ink film is attacked/ 3: Ink film become hard
Evaluation standards：○：Attached, △： Peels off partly, ×：Takes some time to peel off, ××：Peels off immediately after dipping.
(It takes 3 minutes to peel off when dipping in ethanol and xylene.)
Mimaki Europe B.V.
Industrial Products
31
The Software RIP
Rasterlink6
• New RasterLink 6 is Simplicity, and Usability
• New useful functions
• Now anyone can have the more beautiful and
more sophisticated output
• This is “Everyone’s RIP software”
Mimaki Europe B.V.
Industrial Products
32
The Software RIP
Rasterlink6
• The easy intuitive operation
1 The basic configuration
settings are displayed with icon
enabling intuitive manipulation
Mimaki Europe B.V.
Industrial Products
2 The related settings are
gathered up in one screen Easy
overview
The mode which is used
frequently can be registered
With this function, printing with
the minimum operation is
possible
3 The progress of the job is
visually confirmable on the main
screen
33
The Software RIP
Rasterlink6
• New useful features
• Inform the printing situation, such as the used amount
of ink, the estimated printing time
• Correspond with the Web Update
• The web update is available
• The program updates and the profiles can be
downloaded via the internet
Mimaki Europe B.V.
Industrial Products
34
Installation space
Machine
Width
Depth
Height
Weight
JFX200-2513
4,400mm
2,250mm during installation
2,450mm during operation
1,250mm
650㎏
•
1,000mm
or more
1,000mm
or more
4,450mm or more
1,000mm
or more
•
•
1,000mm
or more
6,400mm or more
Mimaki Europe B.V.
Industrial Products
•
About installation space
•
•
•
Do not install on the weak surface floor.
Make sure to use in a ventilated
environment.
Environmental temperature shall be 15 to
30 degrees C.
Do not install on carpets etc.
•
because those are easy to be charged,
and it can effect the image quality.
Generates ink odor
•
Please use the machine in a wellventilated environment.
Use the foot base
•
in order to prevent floor deformation,.
35
About options
•
•
The strong vacuum unit and Ionizer Kit are available
The ionizer kit, an recommended option, neutralize static electricity of the surface
of the media
Ionizer KIT
(OPT-J0342)
Optional vacuum unit (*With caster)
W800 × D750 × Ｈ650
Optional blower
Connection KIT
（OPT-J0348）
Single phase200-240V,30A
Vacuum unit(Single Phase) OPT-J0217
* Independent power supply is needed when using optional vacuum unit apart from Optional blower Connection KIT and printer.
Mimaki Europe B.V.
Industrial Products
36
JFX200-2513 Specifications
Item
Head
Print mode
(Scan x Feed)
Specification
Drop-on-demand piezoelectric print heads (2 head: 2-layered staggered arrangement in 1-line)
4-color set installed
300x450HQ
600x900
: Bi/Uni 3/6/12/24 pass
: Bi/Uni 6/12/24 pass
4-color + White set installed
300x450HQ
600x900
: Bi/Uni 6/12/24 pass
: Bi/Uni 12/24/48 pass
Usable inks
Dedicated UV curable in (C, M, Y, K, W, Cl)
Ink supply (Available when the External ink supply unit is connected. )
Supplying 1L x 8 bottles (For 4-color, UISS switching is available.)
Ink capacity
4 colors
4 colors + W + Cl
Media size that can be used
Size
2580 x 2040 mm
Thickness
Less than 50 mm
Max. printing width
Distance
accuracy
:1L-bottle x 2 for each color
:1L-bottle x 1 for each color, 2 for white and 2 for clear
2500 x 1300 mm
Absolute accuracy
Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Repeatability
Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Squareness
± 0.5 mm / 500 mm
Head height adjustment
1.2mm to 3mm (media thickness automatic recognition)
Media absorption
Absorption fixing with vacuum unit
UV unit
UV LED lamp fitting (mounted on carriage)
UV power is mounted in the main body.
Waste ink tank
Bottle type (3,200 cc)/ Detected by sensor
Interface
USB 2.0
Command
Noise
MRL- III
Standby
Less than 55 dB
At operation
Less than 70 dB
Compliance with standards
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC, Low Voltage Directive, Machinery Directive), CB Report, RoHS
Power supply and power consumption
AC200 - 240 ± 10% , 50/60Hz ± 1Hz , 12A or less
Power consumption
2880 VA or less
Ambient
conditions
Mimaki Europe B.V.
Weight
Industrial
Products
Outside
dimensions
Service temperature range
15 °C to 30 °C (59 °F to 86 °F)
Relative humidity
35 to 65% Rh (No condensation)
Quality assurance temperature
18 °C to 25 °C (64.4 °F to 77 °F)
Temperature gradient
± 10 °C / h or less
Dust
0.15mg/m3 (Equivalent to normal office level)
Printer main unit
650 kg or less
Printer main unit
4400 mm(W) x 2250 mm(D) x 1250mm(H) for installation. During operation 4400mm(W) x2450 mm(D) x1250mm(H)
37
Print speed list
4C
Color
Mode
High Speed
Production
Standard
High Quality
Resolution
300x450HQ
600x600
600x900
1200x1200
Pass
6
8
12
16
Mode
High Speed
Production
Standard
High Quality
Resolution
300x450HQ
600x600
600x900
1200x1200
Pass
12
16
24
32
4C + W or Cl
Uni/Bi
Bi
Bi
Bi
Uni
Scan
Normal
Hi
Hi
Hi
Speed
25.0m²/h
18.0m²/h
12.5m²/h
3.4m²/h
Uni/Bi
Bi
Bi
Bi
Uni
Scan
Normal
Hi
Hi
Hi
Speed
12.5m²/h
9.0m²/h
6.2m²/h
1.7m²/h
Color
Color on White or Color on Clear
Mode
Resolution
Pass
Uni/Bi
Scan
Speed
High Speed
Production
Standard
High Quality
300x450HQ
600x600
600x900
1200x1200
12
16
24
32
Bi
Bi
Bi
Uni
Normal
Hi
Hi
Hi
12.5m²/h
9.0m²/h
6.2m²/h
1.7m²/h
LED Lamp
(In）
0mm
0mm
0mm
0mm
White on Color or Clear on Color
Mimaki Europe B.V.
Industrial Products
Mode
Resolution
Pass
Uni/Bi
Scan
Speed
High Speed
Production
Standard
High Quality
300x450HQ
600x600
600x900
1200x1200
12
16
24
32
Bi
Bi
Bi
Uni
Normal
Hi
Hi
Hi
12.5m²/h
9.0m²/h
6.2m²/h
1.7m²/h
LED Lamp
(In）
65mm
65mm
65mm
65mm
38
The adjustment of LED_UV lamps alignment
•
The alignment of UV lamps needs to be adjusted depending on the printing.
• Loosen the screw of the lamp and slide it to move the UV lamp for right and left of the carriage.
Adjust the tip of the arrow to the scale
marks
•
Suitable timing for changing UV position
•
•
•
Mimaki Europe B.V.
Industrial Products
The lamp position should be above setting when you prioritize the image quality, and the lamp position need
to be changed.
(The machine suspends before printing clear ink and the alarm will be shown in RasterLink.)
If you cannot change the lamp position during the print, please set the lamp position at 0mm before printing.
With RasterLink6, the following message dialog box may be displayed, then click the [OK] button is clicked
39
Appendix: Ink Consumption
①Color Overall Print
Data:
Make this graphic file by Illustrator
(C=100%,M=100%,Y=100%,K=100% )
1000mm
(8’)
Printing Condition & Ink Consumption
720 x 900dpi, 12pass 11.975cc
②Clear Overall Print
Data：
Make this graphic file by Illustrator(K=100%)
Replace the color to CL=200% on RL6
Print Mode : Glossy Print
Printing Condition & Ink Consumption
720 x 900dpi, 24pass 15.686cc
700mm (4’)
③Full color Print
Data：
Make this Full color data.
Printing Condition & Ink Consumption
720 x 900dpi、12pass 14.166cc
1300mm
2500mm
※These ink Consumption are calculated value. They may change depending on graphic files and print condition .
※Ink consumption except printing is eliminated.
Mimaki Europe B.V.
Industrial Products
40
Comparison
• Mimaki JFX200-2513, with LUS150
• Canon (Oce), 318GL, with IJ255
Mimaki Europe B.V.
Industrial Products
41
LUS-150 vs Oce IJ255 ink property comparison
Color gamut
5
LUS-150
OCEIJ255
硬質インク
Oce
ink
LH-100
4
Scratch
resistance
Outdoor durability
3
Adhesiveness
(Media
compatibility)
Solvent resistance
(Ethanol)
2
1
0
Scratch resistance
(Pencil)
Flexibilit
y
Folding
Offset
Tackiness
Bad:0⇔Good:5
The property of Oce hard type ink is similar to LH-100
Mimaki Europe B.V.
Industrial Products
LUS-150
・The flexible ink does not crack the
membrane like LH-100 and Oce’s hard ink
(Flexibility: About 150%)
The strength of LUS-150
・When post processing, the membrane does
not crack
・The adhesiveness and outdoor durability are
better than hard type ink
The weakness of LUS-150
・The scratch and solvent resistance are worse
than hard type ink
・A little tackiness
OCE IJ255 ink
・Superior in scratch and solvent resistance
(Flexibility: About 120%)
The strength of OCE IJ255 ink
・Solvent resistance is better than LUS-150
・Little tackiness
The weakness of OCE IJ255 ink
・Poor media compatibility
・The membrane cracks when post processing
42
LUS-150 vs Oce IJ255 ink property comparison
• Color gamut comparison
120
LUS-150
Y
Oce hard ink
80
R
40
The color gamut of LUS-150
and Oce hard type ink are
almost similar
G
0
-120
-80
-40
0
40
80
M
120
-40
C
B
-80
Measuring machine: Spectrolino (Gretag Macbeth)
Condition: D50, 2°
-120
Mimaki Europe B.V.
Industrial Products
43
LUS-150 vs Oce IJ255 ink property comparison
• Adhesiveness(Media compatibility)
Material
Media
LH-100
LUS-150
OCE
HK31WF (Simple treatment PET)
○
○
○
U292W
×
○
×
Lexan
○
×
×
Takiron
○
△
×
Acrylic
PLEXIGLAS
△
△
×
PVC
Mimaki SPC-0706
○
○
△
FOREX
△
△
△
PET
PC
Evaluation standards:
○:Excellent to Good
△:Medium (The ink may peels off by cross
cutting)
X :Not suitable (The ink peels off easily by tape)
・LUS-150 matches well on PET and PVC
・The Oce’s hard type ink peels off easily without cross cutting when printing on acrylic
Mimaki Europe B.V.
Industrial Products
44
LUS-150 vs Oce IJ255 ink property comparison
• Adhesiveness on PLEXIGLAS (Acrylic)
LUS-150
OCEIJ255 ink
No Cross Cutting
Cross Cutting
No Cross Cutting
Cross Cutting
・On acrylic, LUS-150 does not peel off with no cross cutting
・OCEIJ255 ink peels off with or without cross cutting
Mimaki Europe B.V.
Industrial Products
45
LUS-150 vs Oce IJ255 ink property comparison
•
Outdoor durability (Accelerating test)
JFX200 with LUS-150
◇C
□M
△Y
○K
40
35
30
25
20
15
10
5
0
⊿E
⊿E
Arizona 460GT with Oce hard type
ink
45
0
50
（1年相当）
About
1 year
100
（2年相当）
About
2 years
試験時間(h)
150 (h
)
（3年相当）
About
3 years
45
40
35
30
25
20
15
10
5
0
◇C
□M
△Y
○K
0
試験時間(h)
50
100
（1年相当）
About
1 year
（2年相当）
About
2 years
150 (h
)
（3年相当）
About
3 years
*Tested media: Mimaki’s original Gloss PVC(G137)
The change of the color (C,M,K) of LUS-150 is
Less than Oce hard type ink.
Mimaki Europe B.V.
Industrial Products
46
LUS-150 vs Oce IJ255 ink property comparison
• Outdoor durability (Accelerating test)
Start
50h later
100h later
150h later
(About 1year）
(About 2 years）
(About 3 years）
150h later
（Expanded image）
LUS-150
OceIJ255
ink
Both inks discolors constantly. The membrane cracking of Oce is worse than LUS-150.
Mimaki Europe B.V.
Industrial Products
47
(4C) Comparison with Oce
Oce’480XT
Oce’460XT
【Hardware price 】
Oce’440XT
14.4m²/h
Oce’660XT
28.4m²/h
33m²/h
Oce’480GT
JFX500-2131
Oce’460GT
26m²/h
Oce’440GT
14m²/h
Our new JFX line-up will be
very competitive in these
well-selling segments
(80% of the market) !!!!
Oce’318GL
8.4m²/h JFX200-2513
12.5m²/h
Remarks : Oce’s Std mode is Quality. Faster modes(Express, Production) has a tendency
to have banding with flat-bed media.（Tested and confirmed at our facility)
0
Mimaki Europe B.V.
Industrial Products
5m²/h
10m²/h
15m²/h
20m²/h
25m²/h
30m²/h
【Std Speed】
48
(4C＋W) Comparison with Oce
White ink
Model Price
Oce’480XT
Oce’460XT
Oce’440XT
7.6m²/h
Oce’550GT
14.1m²/h
18.1m²/h
Oce’480GT
【Hardware price 】
JFX500-2131
Oce’460GT
Oce’440GT
7.6m²/h
Our new JFX line-up will be
very competitive in these
well-selling segments
(80% of the market) !!!!
Oce’318GL
4.1m²/h
JFX200-2513
White ink
Model Price
6m²/h
Remarks : Oce’s Std mode is Quality. Faster modes(Express, Production) has a tendency
to have banding with flat-bed media.（Tested and confirmed at our facility)
0
Mimaki Europe B.V.
Industrial Products
5m²/h
10m²/h
15m²/h
20m²/h
25m²/h
30m²/h
49
Thank you
MIMAKI EUROPE B.V.
Mimaki Europe B.V.
Industrial Products