SYS30 Setup

SYS30
2 Way Setup
+
Quick Start tips
+
BONUS C2444U / USB Quick Start Setup
Rev A
11/12/2008
carvinservice.com
-1-
SYS30 Contents:
(2) TRX153N
(2) TRX218N
(1) TRXMAIN RACK
TRXMAIN RACK = (2) DCM2000, (1) DCM2570, (1) XC3000, (4) PRO50TL, (2) PRO10TL,
(4) PRO10XLR, (1) 12 Space RW12 Rack w/ Casters.
AC cable
Plug in the AC cord, push firmly
XC3000
DCM2000
DCM2570
DCM2000
Note: The DCM2000/2570 has a soft start, meaning it takes 3 seconds to fully engage the sound.
Mixer to Crossover (XC3000) connection

Carvin Mixer (left output)
Ch1 XLR input on XC3000
Mixer to Crossover (XC3000) connection

Carvin Mixer (Right output)
Ch2 XLR input on XC3000
Note: The mixer is not provided with SYS30 Package. If you decide to get a Carvin mixer, Quick Start is
provided. This link will take you to the SYS30 online, click on Accessories to upgrade to a CARVIN mixer.
https://www.carvinguitars.com/products/single.php?product=SYS30
-2-
Visual scheme of (2 way-stereo) setup:
DCM2570  Ch 1 TRX153 (HIGH) Full Range
Ch 2 TRX153 (HIGH) Full Range
DCM2000  TRX218N (Bridged) (LOW)
DCM2000  TRX218N (Bridged) (LOW)
TRX153N connections (HIGHS)

XC3000 XLR (highs) Ch 1output
Input of DCM2570 Ch 1
TRX153N connections (HIGHS)

DCM2570 Output 1 (Twist lock)
First TRX153N (Full Range)
Flip switch to (FULL RANGE)
TRX153N connections (HIGHS)

XC3000 XLR (highs) Ch 2 output
Input of DCM2570 Ch 2
TRX153N connections (HIGHS)

DCM2570 Output 2 (Twist lock)
Second TRX153N (Full Range)
Flip switch to (FULL RANGE)
-3-
TRX153N connections (LOWS)

XC3000 XLR (lows) Ch 1output
Input of first DCM2000 Ch 1
TRX218N connections (LOWS)
Press in Bridge button on DCM2000
TRX218N connections (LOWS)

DCM2000 Bridged output (Middle jack)
First TRX218N
Use the Bridged output of the first DCM2000 to first TRX218N
TRX218N connections (LOWS)

Connect XLR from first DCM2000 (Through out) to Second DCM2000 XLR input Ch1.
-4-
TRX218N connections (LOWS)
Press in Bridge button on Second DCM2000, note that the switch is recessed inside
the chassis.
DCM2000
TRX218N connections (LOWS)

Connect second DCM2000 Bridged output
Second TRX218N
XC3000 Settings
TIP: Set the XC3000 to Low Frequency: 80Hz to 100Hz to drive the TRX218N
“SUBS”, Subs are optimal at that frequency (both channels, also set the XC3000 to 2
way setting in the front (switch) both channels.
Press the 2 way button, to engage 2 way functions on the XC3000 crossover.
NOTE: On the DCM2000s only 1 knob will work, that is because you are running the amps in Bridge mode.
The CH 2 Knob won’t do anything, only Ch 1.
TIP: On both of your DCM2000 press the (Low Cut) button. When it’s engaged only low frequencies will be
filtered through. Anything else will be cut out.
TIP: If the AC line is noisy, press the (Ground lift) button in the back of the DCMs, and on the XC3000.
Switch eliminates ground loops.
-5-
Quick Start Tips (C2444U)
Connection Tips
- After connecting the speakers, and AC cord.
- Plug in Mic, or instrument into input Channel 1 of Mixer
Ch1 Routing button
- Press the L-R button, and turn up slider Channel # 1.
Master L-R select
- Press the L-R button, in the Master Board
Master Level
Power ON: DCM2570, DCM2000, DCM2000, XC3000.
Turn up the Volume on the DCMs, and the XC3000.
Master Sliders
- Turn up the Master Sliders (L) left, (R) right. You are ready
to go!
-6-
Quick Start Tips (USB) (C2444U)
USB Connection
- Download and install Audacity in your computer.
To download go here: http://audacity.sourceforge.net/
USB Connection
You will need a USB Cord.
USB Connection
- Connect USB to Mixer.
- Turn up the record level control to record to your computer.
USB Connection
- Connect other end of the USB cord to Computer or Laptop.
USB Connection
- Turn on the Mixer, Windows will recognize the C1644U as a
USB audio device. Start the Audacity software, and you are
ready to record!
-7-
USB Connection
- Turn TAPE IN control knob up to hear recorded music
through your system.
- Press Play on Audacity software to play back through your
system.
USB Connection
- Turn on the MONITOR INPUT feature, to monitor your
music.
- Press Record to record to your computer.
USB Connection
- You can save as WAV, or MP3.
- You can also Open a music file (MP3 or Wave) and play back
through the system.
Comments or questions email us at [email protected]
-8-