christmas ring - Create Your Style

DESIGN PROJECT
CHRISTMAS RING
“ANTIQUE GLAMOUR”
Sewing
CHRISTMAS RING
“ANTIQUE GLAMOUR”
Crocheting
SWAROVSKI ELEMENTS
Article
Supplies & Tools
Product Group
Article No.
Amount
Size
Color
Color Code
Supplies
Round Stones
1201
1 pc.
35 mm
Jet Hematite F
280 HEM
Leather, 6 x 6 cm
Nylon thread, transparent, 0.35 mm, 1m
2 Spools stretchy sewing silk
Crystal Pearls
5810
22 pcs.
3 mm
Crystal Petrol Pearl
001 600
Tools
Crocheting needle
Double sided tape
Scissors
Sewing needle
Tape
Level of design: BEGINNER
Have also a look at the text instruction at the last page!
STEP 1
5 cm
STEP 2
Step 2
WWW.CREATE-YOUR-STYLE.COM
2/5
Step 3
STEP 3
3 mm
0.35 mm
1m
Repeat
STEP 4
Step 4
Repeat
WWW.CREATE-YOUR-STYLE.COM
3/5
Step
5 5
STEP
x4
STEP
Step
6 6
Repeat
STEP 7
Step 7
WWW.CREATE-YOUR-STYLE.COM
4/5
CHRISTMAS RING
“ANTIQUE GLAMOUR”
STEP 1:
Draw a 5 cm diameter circle or use the one in the illustration as a template. Adhere double sided tape onto
the back.
STEP 2:
Place the pattern on top of a piece of leather and cut the circle out.
STEP 3:
Cut 1m of 0.35 mm nylon thread. Stitch from the back of the leather circle to the front about 3 mm in from
the edge. Begin adding 3 mm Swarovski Crystal Petrol Pearls article 5810 as shown in the illustrations as you
ccontinue to stitch around the leather circle.
STEP 4:
Pull the nylon threads to get the shape as shown in the illustration. Remove the tape and add the Swarovski
Round Stone article 1201 35 mm Jet Hematite to the center of the beaded leather circle. Tie a double knot
with both thread ends. Stitch one of the thread ends out to the back side from the center of the leather as
depicted in the illustrations.
STEP 5:
Use two spools of machine stretchy sewing silk, make a slip knot and place it on a crochet hook. Place yarn
over hook and slide through the loop on the hook. Repeat until you have made six stitches.
STEP 6:
Crochet back along these first six stitches and repeat until the length of the crocheted yarn is the length of your
“ring size”.
STEP 7:
Sew the ends together to form a tube-like structure. Attach to the center of the leather circle with the nylon
thread that was stitched out the back side in step 4 as shown in illustrations.
WWW.CREATE-YOUR-STYLE.COM
5/5