JOSEF EMMERICH PUMPENFABRIK GMBH

JOSEF EMMERICH PUMPENFABRIK GMBH
D-53506 Hönningen-Liers/Ahr
_______________________________________________________________________________________________________________________________________________________________________
Materials:
Materials:
Cast-iron
Cast-iron rubber-lined
Various stainless steel
Capacities:
0,5 ... 400 m³/h
Picture 1 Crankshaft gear
Pressure:
1,6 MPa (16 bar) as standard design,
higher pressures acc. project requirements
Temperature of pumped material:
Up to 100°C as standard design,
higher temperatures on demand
Field of application:
Pumping of abrasive and aggressive
materials. Very gentle pumping of materials
sensitive to shear
Picture 2 TKM500
Remark:
The well-tried „TKM“–model
(Triplex-Kolben-Membranpumpe)!
produces nearly half of the pulsation
compared to a 2-cylinder quadruple-acting
piston diaphragm pump. This is the basis for
an extremely quit operation of the pump.
Constructional features:
ƒ Electrically driven
modular Piston Diaphragm Pump
ƒ Pump head made of various metal materials
ƒ Diaphragm pulsation dampener
ƒ Double diaphragm
ƒ Internal adjustment of pressure and quantity
in dependence to the discharge pressure
ƒ Inspection opening for diaphragm and valves
[m3/h]
50
60
70
80
90
Picture 3 TKM900
100
150
200
250
300
350
400
TKM1500
3 - cylinder, single - acting
TKM1200
TKM1000
TKM900
TKM800
TKM700
TKM600
TKM500
Geschäftsführer: Reiner Arenz
Registergericht Andernach Nr. B. 377
www.EMMERICH-Pumpenfabrik.de TKM-Info_GB.doc