Graymark brochure_V2.indd

Proveedor de Laboratorios Tecnológicos para
la Educación Media-Superior y Superior
Edutelsa S.a de C.V
Torre Eiffel Nº 352
Parque Industrial las Torres
C.P. 25114
Saltillo, Coahuila
www.edutelsa.com
Telefonos:
(844) 434-0022
01-800-718-4010
Fax:
(844) 434-0033
HOME TECHNOLOGY INTEGRATION
Certify Student Success
Prepare Your IT
Students to Succeed
Anywhere
With Lab-Volt’s training systems, your
students will be prepared for a wide range
of jobs in the growing field of Information
Technology. These practical, skills-based
programs cover basic skills in computer
operation through network installation
and troubleshooting and are preferred by
hundreds of trade, vocational, and technical schools throughout the world for their
comprehensive and up-to-date coverage
of contemporary computer technology.
With these training systems, you can be
sure you’re making a sound investment for
your students’ futures.
The following products were designed by
Graymark International Inc., a subsidiary of
Lab-Volt:
• CablingTech™ Cable Installation
Trainer
• Cable Termination™ Trainer
• Copper Termination Trainer
• Fiber Termination Trainer
Certifications
Certifications are recognized throughout the industry as the standard
for providing foundation-level skill sets, validating knowledge within
a given career. Provide your students with the ability to compete in a
growing job market with the certification difference!
Graymark is a Leviton
Certified Training Partner!
SuiteLink Residential Installation and
Integration Trainer
Students who successfully complete the instructor-led SuiteLink
training course will earn Graymark’s HTI Technician certificate which
automatically qualifies them to be Leviton Authorized Installers!
Commander – Certified Computer Service Technician - CST
CablingTech – Data Cabling Installer
CablingTech – Fiber Optics Installer
SuiteLink – Residential Electronics Systems
Integrator
*RESI Endorsements for Master RESI Certification
• Audio and Video
• CCTV ( Closed
• Environmental Control
Circuit TV)
• Computer Networking • Security and Surveillance
• COMMANDER ® PC Troubleshooting
& Repair Trainer
• Ranger ® PC Familiarization Course
HTI+ Technician
• NETtech™ Network Technology
Training Program
• DisplayPro™ Monitor Repair Trainer
• Printer Repair Trainer™
SuiteLink Residential Installation
and Integration Trainer
Lab-Volt also offers an additional training system so you can create a tailored
program to meet your students’ needs and
goals:
• Tech-Design®: Foundations in
Information Technology
2
Cable Technician
CablingTech
• GPS-101™ Global Positioning
System Technology Trainer
• SuiteLink™ Home Systems
Installation and Integration Trainer
SuiteLink Residential
Installation and
Integration Trainer
COMMANDER PC Troubleshooting and Repair Trainer
Support for A+ Certification
DisplayPro Monitor Repair Trainer
PrinterRepair Trainer
NETTECH Network Technology Trainer
CablingTech
Approved for Continuing Education Credits
RCDD: 30 Credits OSP: 7 Credits INST:
LAN: 10 Credits
RES: 5 Credits 12 Credits
The SuiteLink™ Home Systems Installation and Integration Trainer provides hands-on training in home
systems installation and integration and creates a simulated environment of a typical five-room home built to
industry standards, with an office, kitchen, family room, student bedroom,
master bedroom, and media center.
Students learn how to plan, wire, terminate, install, connect,
test, integrate, and troubleshoot
the systems of today’s digitallyintegrated home networks. They
are provided with the tools
necessary to master the
basic skills needed in cutting,
stripping, terminating, and
testing a range of coax and UTP
cables.
SuiteLink is available in six- and
twelve-student configurations.
Key elements included in each
training system are:
• Student training program
• Student tool set
• Walls package
• Equipment package
• Cables package
• Faulted cables module
• Instructor’s package with cable
tester and remote IDs
SuiteLink Home Systems
Installation & Integration Trainer
• Audio/Video Package (sold separately)
While this is an extensive training system, it was designed to be easy for the
instructors to train, manage, and monitor each student’s progress. Instructors can tailor
their classes to meet teaching goals, physical classroom restrictions, and student needs.
Course time can easily be shortened or extended, and the instructor can emphasize specific subsystems as needed.
The equipment package included with each trainer contains all the components
needed to wire today’s home networks. Most components were selected from
the well-recognized Leviton & HAI line for quality, availability, durability, and
compatibility.
Walls package
Faulted Cables Module
Student tool set
Instructor’s
package
Student Training
Program
Cables
package
Equipment package
3
VIDEO, DATA, & VOICE CABLING
Place Your Grads in a Job-Rich Network
CablingTech provides realistic, hands-on training in cable installation,
termination, and testing.
• All Three Technologies: Twisted Pair, Coax, Fiber
• All Three Industries: Video, Data, Voice (Telco)
• All Three Installations: Residential, Commercial, Industrial
CablingTech Training System
• Offered in 6-, 12-, 18- and 24-student configurations.
• Available for Copper or Copper and Fiber.
• Includes all necessary courseware, components, equipment, and
nd tools.
Student Training Program includes:
• State-of-the-art instruction in cabling technology and network theory.
• Well-illustrated, step-by-step courseware (hard copy and CD-ROM).
ROM).
• Twisted Pair practice station.
BICSI®- Approved
for Continuing
Education Credits
BICSI (Building Industry
Consulting Services,
International) recognizes 64
continuing education credits
for students successfully
completing the CablingTech
Trainer program.
RCDD: 30 credits
LAN: 10 credits
OSP: 7 credits
RES: 5 credits
INST: 12 credits
Students learn to cut, strip, dress, route, and terminate five types of twisted
pair cables (25-pair Telco, 4-pair Telco, 4-conductor Telco station, 1-pair
cross connect, 4-pair CAT5e).
Cable Installation Tool Set
Data Cabling Installer
Fiber Optics Installer
Students are each supplied with an extensive set of
industry-standard tools to be used during their skillsset training. Tools include:
• Cable cutter
Instructor’s Package
The instructor’s package for the CablingTech
training system is designed to give the instructors
the capability to monitor and control each phase
of their curriculum through the use of testing
equipment, courseware guides, and customer
support.
• Jacket ripper
• Rotary cable slitter
• Electrician’s
scissors
• BNC/RG-6/RG-59
coax crimper
• Safety goggles
• Tape measure
• Slip joint pliers
• Modular cutter/
stripper/crimper
• Type 110 and 66
block punch down
blades
• Phillips and slot
head screwdrivers
• Impact punch
down tool
4
• RG-58/RG-59
coax stripper
• Wire probe
• Wire stripper
• Tool bag
Skills Training Center (STC)
Each student training center can accommodate six students and consists of a walls package, equipment package,
and student tool sets. Students learn to pull, install, and terminate cable in various types of walls, equipment, and
conditions. The cables and components are color-coded to easily identify each student’s work.
STC equipment packages contain all the required parts, excluding walls, to construct the Skills Training Center.
Each STC is supplied with one Copper Equipment Package, and if the Fiber model is ordered, one Fiber Package.
CablingTech Cable Installation Trainer
Or start with our low-cost, single-student Cable Termination Trainer
The Cable Termination Trainer introduces students to
cable termination and network theory and offers hands-on
experience with cable in:
• All Three Technologies: Twisted Pair, Fiber, and Coax
• All Three Industries: Video, Data, Voice (Telco)
The trainer can effectively be used as a self-study program
or in an instructor-led classroom. The trainer contains all
necessary courseware, components, equipment, and tools
required. Key elements included in the trainer are:
Next, students move on to gain real-world experience
by completing numerous exercises and then continue
to the Twisted Pair practice station where they learn
to cut, strip, dress, route, and terminate cables.
Students who master these skills can move on to the
CablingTech Cable Installation Trainer; a separate,
more advanced, comprehensive cable installation
trainer.
• Courseware
• Twisted Pair practice station
• Tools
• Cable and parts
Cable Termination starts with foundational instruction in
cable and network theory that familiarizes students with
network types, cables, and connectors.
Fiber Termination Trainer
Copper Termination Trainer
5
PC TROUBLESHOOTING & REPAIR
Take Command of Your Classroom
Through extensive, hands-on experiences, students develop an impressive inventory of high-level knowledge and
skills that are prized in today’s high-performance workplace. Skills include:
• PC computer systems and components
• Computer technology and concepts
• Computer safety, maintenance, and operation
• Assembly and testing of state-of-the-art computer
hardware
• Diagnosing, troubleshooting, and repairing computer
problems
After completion of the COMMANDER ® training system
courseware, students are prepared for the knowledge-based
CompTIA A+ ® Certification exam.
COMMANDER PC Troubleshooting
and Repair Trainer
Many companies require both new and current employees to receive A+ Certification from CompTIA. This ensures that computer technicians remain current on the latest IT standards and are able
to apply the best value, service, and support to end users.
The COMMANDER is a CompTIA-approved A+ training program designed to provide students
with the competitive edge they will need to pass the A+ Certification exam.
The COMMANDER ® training system accomplishes its objectives
through three interrelated elements.
• Student Trainer (courseware, hardware, and software)
• Instructor’s Package (sold separately)
• PC Service Tool Set (sold separately)
• Certified Computer
Service Technician
(CST)
• A+ Certification
These components are used together to accomplish a rigorous series of
learning objectives including:
• Ability to assemble and test state-of-the-art
computer hardware, including hands-on experience
with hardware and software
• Thorough knowledge of PC computer systems and
each system component
• Comprehensive understanding of computer
technology and concepts
• An understanding of computer safety, maintenance,
and operation
• Thorough understanding of Microsoft ® Windows ®;
software installation and use
6
COMMANDER Faulted Parts Set
• Marketable skills in diagnosing, troubleshooting, and
repairing computer problems
Instructor’s Package provides:
• Curriculum-management assistance
for instructors
Student Courseware
Student courseware includes a
student theory manual, student lab
manual, A+ In Depth reference
book, and A+ practice tests.
Students follow step-by-step
diagnosis and troubleshooting
procedures for all PC components
and sub-systems, including but not
limited to:
• Hardware assembly and testing
• Personal safety
• Course objectives, instructions for
PC Service Tools, test equipment,
diagnostic software, and fault inserts
• Faulted Parts Set: used for
troubleshooting and problem-solving
exercises; can accommodate a class
of up to 50 students
• Full set of student courseware
• TechRef book
• IC puller and grounding wrist strap
• System troubleshooting
• BIOS post codes
PC Service Tool Set
• PC trainer configuration data
The PC Service Tool Set contains every tool needed
for the COMMANDER course and for diagnosing
and repairing computers in the field. The tool set also
includes the award-winning AMI diagnostic software,
which provides state-of-the-art analysis of all PC parts.
• Keyboard scan codes
PC FAMILIARIZATION COURSE
Need to Begin with PC Basics?
Start with the Ranger® PC Familiarization Course
The Ranger PC Familiarization Course is designed to be affordable, flexible, and top-quality and is an excellent
introduction for students whose backgrounds or career goals require a more basic exposure to computer
technology. Therefore, this training course is the perfect antecedent to the COMMANDER training system.
The Ranger PC Familiarization Course trains students for jobs as system assemblers, computer operators, or
other entry level IT positions and includes well-illustrated, stepby-step PC instructions to cover an extensive variety of topics,
including but not limited to:
• System inventory
• CMOS setup
• Inventory descriptions
• CD-ROM/hard disk drive
• Hardware assembly and testing
• Sound card
• Motherboard
• Application software
• Video display system
• Connecting accessories
• Keyboards
• Maintenance
7
NETWORK TECHNOLOGY
Empower Your Students to Connect
Hands-On Classroom Training to Rewarding Careers
The real-world experience of the NETtech training program gives students the skills and confidence they need to
excel in the high-performance workplace of the 21st century. Students gain experience with the concepts, tools,
and software required to perform installation, configuration, maintenance, and troubleshooting.
NETtech consists of five interrelated components that
provide all the tools necessary to build the skills and
abilities students will need for the workplace. Instructors
may purchase the following components as a package
or individually.*
•
•
•
•
•
Student Training Program
Instructor’s Package
Network Service Tool Set
Classroom Consumables Package
Client/Server Packages (optional) **
NETTech Network Technology Training Program
CompTIA Network+ Certification recognizes a technician’s ability to describe the features and functions of
networking components and to install, configure, and troubleshoot basic networking hardware, protocols,
and services.
The NETtech Training Program is a CompTIA-approved Network+ training program designed to provide
students with the competitive edge they will need to pass the Network+ Certification exam.
Students should have completed the Graymark COMMANDER PC Troubleshooting and Repair program or have
equivalent experience with PC technology before enrolling in the NETtech program.
The NETtech training program is supported by 75 lab exercises through which students
gain all the essential skills a network technician needs for the job.
Data Communications provides experience in:
• Configuring and installing a FAX/Modem and communication software.
• Sending and receiving faxes.
• Communicating with Internet sites.
Peer-to-Peer Networks provides experience in:
• Step-by-step set-up and maintenance of a local
area/in-building network.
• Configuring and installing a Network Interface
Controller (NIC) and NIC drivers.
• Installing and using Windows ® XP as a peer-to-peer
network.
• Using MS-DOS ® Utilities.
Client/Server Networks provides experience in:
8
• Installing and configuring a Windows Server 2003 and client.
• Installing and using an Ethernet switch.
Network Service Tool Set
* A computer is not included. The COMMANDER PC or
equivalent IBM-compatible PC, along with Windows XP
Professional, is required.
** Schools with existing Novell or Microsoft client/server
licenses need not purchase the Client/Server Package.
Student Training Program
• Student Instruction Manual
• Reference texts
Instructor’s Package (sold separately)
• Network+ study guide
Each classroom requires only one instructor’s package,
which is available with or without a Time Domain Reflectometer (TDR) network cable tester. Instructor’s package
includes tools for managing the class, documenting the
equipment, inserting faults for troubleshooting exercises,
and grading and scoring. Each chapter of the instructor’s
guide parallels the student instruction manual and included corresponding exercise worksheets.
• Windows Server 2003
• Network Interface Controller
• 56K FAX/Modem with Voice
Classroom Consumables Package
• Assortment of UTP, coaxial, fiber optic, and wire cables
• Assorted connectors, connector hoods,
and replacement blades for the modular
tool and coaxial stripper
Network Service Tool Set
Industry standard tools including:
• Multi-network cable tester
• AC receptacle tester
• Parallel jaw cutting/stripping/crimping tool for 8-, 6-,
and 4-position modular plugs
• RG-58 and RG-59 cable stripper and BNC crimper
• Cable cutter
• Carrying case for coaxial tools
Modular Networking Training
In addition to NETtech training program, Lab-Volt offers a Network Fundamentals module. This module teaches
students about the forms and functions of computer networks. Students examine a variety of networks, applications,
and software. The information throughout this module covers a broad range of networking facts and provides an
overview of several Information Technology careers.
Students perform the following activities:
• Compute the power requirements for a UPS (uninterrupted power supply) connected to a specific workstation
• Produce a rough sketch of the classroom
• Use flowcharting software to create a diagram of a star topology, a site plan that includes equipment, a physical
map of the classroom network, and a small home network
• Calculate bend radius of a specified cable and file-download times
9
SATELLITE COMMUNICATIONS TECHNOLOGY
The Graymark GPS-101 training system introduces students to basic digital and analog electronics as well as
GPS technology. Available in kit form, the GPS-101 system contains student courseware, GPS software, and the
following hardware components:
• GPS Receiver (sold separately in the instructor’s package)
• Batteries
• Case
• Interface circuit board
• AC adapter
• Serial cable
PC-based GPS software analyzes the
GPS data and provides a navigation fix
display. The software also has a simulator
mode that displays all functions and
can be used to demonstrate the system
operation, even when satellite signals are
not being received.
The GPS-101 provides step-by-step instruction in the following topics:
• Voltage dividers
• Current limiters
• Digital inverters
• Switching regulators
• R/C timing circuits
• Clock generators
• Operational amplifiers
• Diode clippers
• Flip flops
• Voltage amplifiers and comparators
• Rectifiers
• Divide-by-“16” counters
• AND gates and data gating
• Transistor invertors
• Monostable multivibrators
• Synchronizers
• Transistor drivers
• RS-232 interfaces
• Binary counters
• Darlington transistors
• Power sources
Use Cost-Effective, Introductory 555 Electronics
Module to Teach Analog and Digital Circuits
The Electronics module is provided as a kit. Students build their knowledge of
electronics theory as they follow step-by-step instructions to construct the kit,
one section at a time.
The module is a complete “Introduction to Electronics” course, covering all
Global Positioning System (GPS) and electronics topics.
Navigation concepts and GPS background are discussed. Students learn about latitude and longitude and the
measurement accuracy of GPS hardware. Noise and signal-to-noise ratio concepts are also covered.
The interface board was designed with low-level components to facilitate teaching analog and digital circuits. Students
construct the kit one section at a time. Each section contains a discussion of theory, step-by-step construction
instructions, and hands-on experiences. Surface mount technology (SMT) is taught, and the student mounts several
SMT devices to the PCB. The kit also teaches Global Positioning System (GPS) technology.
10
INFORMATION TECHNOLOGY - ADDITIONAL OPTIONS
The DisplayPro™ is a trainer for students who want careers in Monitor
and Computer Service and Repair. Through comprehensive courseware,
students gain useful knowledge in:
•
•
•
•
The operation of a computer monitor.
Diagnosing, troubleshooting, and repairing monitors.
Using electronic tools and equipment.
Training on safety, health, and environmental factors associated with monitors
and CRTs.
DisplayPro™, the Monitor Repair Trainer, is continuously upgraded as industry standards change. The Instructor’s Package (sold separately) includes an instructor’s
guide, complete set of student courseware, faulted parts set, and more.
The combined foundational knowledge students acquire through
training on the DisplayPro Monitor Repair Trainer and the
Printer Repair Trainer in conjunction with the COMMANDER
PC Troubleshooting & Repair Training System forms a reliable
foundation for success on the A+ Certification Exam.
The Printer Repair Trainer is designed for students who want careers in
Laser Printer and Computer Service and Repair. The workplace-quality
printer provides real-world, hands-on experience through which students
gain knowledge of the operation and internal components of a printer as well as skill in diagnosing, troubleshooting, and repairing printers. The Printer Repair trainer includes a comprehensive set of tools and equipment necessary to troubleshoot, repair, and service laser printers. The Student Manual
nual courseware content includes:
• Parallel, serial, and
infrared ports
• Print spooling
• Memory upgrades
•
•
•
•
Escape codes
Paper handling
Paper jams
Cleaning
• Paper paths
• Error indicators
• Electrostatic
process
• Image
mage quality
• Maintenance
The Instructor’s Package (sold separately) includes an instructor’s guide,
complete set of student courseware, faulted parts set, and more.
Tech-Design: Foundations in Information
i T
Technology
h l
b
by LLab-Volt
bV l S
Systems, IInc.
is a modular, competency-based, hands-on training system that introduces
students to several areas of the Information Technology (IT) industry.
Students begin with IT Fundamentals, a five-lesson module that provides foundational knowledge of the IT industry.
Then, students continue with any of 14 modules, which are grouped by nationally-recognized IT career clusters:
Programming & Software
Development
Information Support
& Services
Interactive Media
Network Systems
Benefits of the Foundations in IT Curriculum
Throughout this dynamic program, students:
• Explore various areas of IT, including
career opportunities and training
requirements.
• Discover strengths and interests.
• Reinforce skills through a variety engaging,
hands-on experiences.
• Develop workplace skills and competence by
learning in meaningful, real-world contexts.
11
A Subsidiary of Lab-Volt Systems, Inc.
Lab-Volt Systems, Inc.
Farmingdale, NJ 07727
USA
Phone: 732-938-2000
Fax: 732-774-8573
E-mail: [email protected]
Lab-Volt Systems, Inc.
Farmingdale, NJ 07727
USA
Phone: 732-938-2000
Fax: 732-774-8573
E-mail: [email protected]
Lab-Volt Ltée/Ltd.
Québec, (Québec) G2N 2K7
CANADA
Phone: 418-849-1000
Fax: 418-849-1666
E-mail: [email protected]
www.labvolt.com
Lab-Volt Ltée/Ltd.
Québec, (Québec) G2N 2K7
CANADA
Phone: 418-849-1000
Fax: 418-849-1666
E-mail: [email protected]
www.labvolt.com
MK94084 Rev. C