supplying the bay area with the finest building

Transcription

Main Showroom at:
2525 Marin Street (at Bayshore)
San Francisco, CA 94124
Tel: (415) 824-4300
Fax: (415) 824-3706
Business Hours:
Monday–Friday 6:00 am - 4:30 pm
Saturday
8:00 am - 2:30 pm
Window & Door Showroom at:
196 Napoleon Street
San Francisco, CA 94124
Tel: (415) 824-0621
Fax: (415) 824-7564
Business Hours:
Monday–Friday 7:00 am - 4:30 pm
Saturday
8:00 am - 2:30 pm
QUALITY PRODUCTS OFFERED BY BERONIO LUMBER
• Decking
• Paneling
• Fencing
• Shingles
• Finish Lumber
• Siding
• Flooring
• Stair Parts
• Framing
• Windows & Doors
• Hardwood Flooring
• Wainscot Moulding
SUPPLYING THE BAY AREA WITH THE
FINEST BUILDING MATERIALS SINCE 1911
ALTHOUGH WE HAVE TRIED TO APPROXIMATE AS CLOSELY AS POSSIBLE THE ORIGINAL COLOR OF THE WOOD, NATURAL COLOR VARIANCES WILL EXIST WHEN
COMPARED TO THE ACTUAL PRODUCT. THERE ARE NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED OF ANY KIND WHATSOEVER, INCLUDING BUT NOT
LIMITED TO REPRESENTATIONS OR WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OF MERCHANTABILITY, WHICH EXTENDED BEYOND THE DESCRIPTION OF
THE FACE HEREOF. SELLER’S LIABILITY SHALL BE LIMITED TO REPLACEMENT OR RESCISSION AT ITS SOLE ELECTION AND IN NO EVENT WILL SELLER BE LIABLE FOR
CONSEQUENTIAL OR PUNITIVE DAMAGES. ANY REPRODUCTION OF THIS CATALOG IN WHOLE OR IN PART, OR ANY OTHER UNAUTHORIZED USE WITHOUT THE EXPRESS
PERMISSION OF THE BERONIO LUMBER COMPANY IS PROHIBITED.
TABLE OF CONTENTS
Abrasives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Adhesives/Caulks/Wood Putties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Dowels/Plastic Sheeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Building Paper/House Wrap/Flashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Floor Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Wood Coatings/Finishes/Sealers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Builder’s Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Gate Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Door Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Z Bar/L Metals/Aluminum Flashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Drywall Metals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Deck Fastening Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Simpson Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Simpson Stainless Steel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Simpson Stainless Steel Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Safety Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Sundries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Hand Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Tool Pouches and Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
Handrail Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Edge Banding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
Shelving Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
Power Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
Air Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
Paslode Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Concrete and Stucco Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
Rebar/Related Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
Moisture Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
Stair Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
Stair Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i–iv
415-824-4300
ABRASIVES
DRYWALL SANDING SCREEN
• 3 5⁄16!x11! pre-cut sheets.
Grit
Qty
Code
• Impregnated with silicone
carbide grit.
100
150
2/PK
2/PK
HW0150
HW0160
• Non-clogging, open mesh is
reversible and can be rinsed
out in cold water.
DRYWALL SANDING SCREEN
• Designed for use with the
Vacuum Drywall Sander.
DRYWALL SANDING SHEETS
•
3 5⁄16!x11!
pre-cut sheets.
• Extra sharp silicone carbide
grit.
Grit
Qty
Code
80
120
5/PK
5/PK
HW0161
HW0163
Grit
Qty
Code
xfine/fine
med/fine
med/coarse
EA
EA
HW0100
HW0101
HW0102
• Designed for quick and easy
attachment.
• Can not be used with the
Vacuum Drywall Sander.
SANDING SPONGE
Size
• Rinse and reuse.
33⁄4”x25⁄8”x1”
• Use wet or dry.
• Wood, Paint, metal, plastic,
and drywall.
EA
PRODUCTION PAPER SHEETS
Size
Grit
Qty
Code
For wood and metal sanding.
Stands up to heavy sanding heat
and pressure. Open-coated with
tough, hard aluminum oxide
mineral. Tan in color.
9”x 11”
36D
50D
80D
100C
120A
220A
EA
HW0256
HW0240
HW0224
HW0211
HW0208
HW0182
SANDING BELTS
Size
Grit
Qty
Code
Aluminum oxide cloth belts.
Combination closed/open coat
to resist loading. Excellent for
hardwood, plywood and particle
board.
3”x 21”
60
80
100
120
60
80
100
120
60
80
100
120
EA
HW2106
HW2108
HW2110
HW2112
HW2406
HW2408
HW2410
HW2412
HW4206
HW4208
HW4210
HW4212
3”x 24”
4”x 24”
415-824-4300
1
EA
EA
EA
EA
ABRASIVES
Size
Grit
Qty
Code
Qty
Code
5”
60
80
100
120
150
180
220
240
320
EA
HW2005
HW2010
HW2012
HW2015
HW2018
HW2020
HW2022
HW2026
HW2027
50EA
HW1040
HW1041
HW1042
HW1043
HW1044
HW1045
HW1046
HW1047
HW1048
PSA CLOTH DISCS
Size
Grit
Qty
Code
Qty
Code
Pressure sensitive, adhesive
backed 5” with 8-hole vac.
5”
40
60
80
120
180
EA
HW2030
HW2035
HW2040
HW2045
HW2050
50EA
HW2060
HW2065
HW2070
HW2075
HW2080
RESIN FIBER 41⁄2” DISC
Size
Grit
Qty
Code
Abrasive disc for angle
grinders and sanders.
41⁄2 ”
36
60
80
5EA
DW4535
DW4537
DW4539
ABRASIVE CUTOFF WHEELS
REINFORCED TYPE 1
Size
Type
Qty
Code
41⁄2 ”
EA
10”
14”
Flat
Depressed Center
Metal
Masonry
Metal
Masonry
Metal
Metal
DW3501
DW3502
DW4526
DW4533
DW3511
DW3521
DW8005
DW8001
Size
Type
Qty
Code
41⁄2”
Metal
Masonry
EA
DW4514
DW4524
HOOK & LOOP SANDING DISCS
FOR VACUUM SYSTEMS
5! Gold hook & loop sanding
discs with 8-hole vac.
For general purpose cutting with
low to medium powered machines.
5”
7”
INDUSTRIAL ABRASIVE DEPRESSED
CENTER WHEELS
Industrial grade grinding wheel for heavy duty
cutting, grinding and material removal applications.
Double reinforced with industrial grit and glue
for increased life and faster cuts.
Superior friability increases sharpness for longer life.
Ideal for low angle and vertical griding in
metal/masonry materials.
RUBBER BACKING PAD
Size
For use with Resin Fiber 41⁄2” Disc.
5⁄8! -11”x 41⁄2”
2
Qty
Code
EA
DW4945
415-824-4300
ADHESIVES/CAULKS/WOOD PUTTIES
AZEK™ ADHESIVE
• Water-based, non-toxic, easy
cleanup.
Size
Qty
Code
16OZ
EA
1AZEA08
• Perfect for AZEK to AZEK
adhesion.
• Glued joints will never open.
FRANKLIN™ WATERPROOF TITEBOND® II
WOOD GLUE
New water proof Titebond® II is
the new generation of wood glues
that are formulated with a unique
polyaliphatic resin polymer called
Duracet™ XTII. This polymer offers
woodworkers better performance
than original Titebond®, plus the
Type II water resistance has
unsurpassed heat resistance,
sands easier, sets faster and is
paintable. Easy water clean up,
plus it is freeze thaw stable.
Excellent for all porous materials.
TITEBOND III ULTIMATE
WOOD GLUE
Titebond III Ultimate Wood Glue offers the
best possible performance in woodworking
glues. This waterproof formula provides
superior bond strength, longer open
assembly time and lower application
temperature. The perfect choice for Interior
and exterior woodworking.
• Passes ANSI/HPVA Type I
water resistance.
• FDA approved for indirect food contact.
• Sands easily
• Water cleanup and non-toxic.
Size
Qty
Code
8OZ
16OZ
1GAL
EA
92GX08
92GX16
92GX1G
Size
Qty
Code
16OZ
1GAL
EA
92GU16
92GU1G
EA
GORILLA™ PREMIUM GLUE
Easy to use. Incredibly strong.
Will bond ceramics, plastics,
metal, softwoods, hardwoods,
teak and other woods without
any special preparation or
resin removal.
Gorilla™ Glue is an ideal allpurpose household glue. Along
with its superior strength and
versatility, consumers appreciate
Gorilla™ Glues environmentally
friendly, 100% solvent free
formula. Carcinogen Free.
415-824-4300
3
Size
Qty
Code
8OZ
18OZ
EA
92GG08
92GG18
CONTACT CEMENT
Smooth spreading grade,
maximum strength, waterproof,
fast drying. Neoprene and resin
formulation provides maximum
strength and toughness.
Permanently bonds laminates to
wood, plywood, hardboard, metal,
or plaster. Heat resistant and
waterproof. Fast drying. Tan color.
Size
Qty
Code
1GAL
EA
92ACON
MELAMINE GLUE “ROO-CLEAR”®
Size
Qty
Code
16OZ
1GAL
EA
92GM16
92GM1G
Size
Qty
Code
EA
923M90
Qty
Code
Melamine “Roo”® Glue is
specifically made for bonding
melamine coated boards. Makes
butt joints stronger than the
board‘s surfaces. Dries
translucent (clear). Water based
and non-toxic. 16 years in use;
proven long term.
3M™ #90 AEROSOL ADHESIVE
Extra strength, industrial grade
aerosol adhesive. Fast bonding
action permits quicker handling of
parts to speed assembly
operations. Two-surface adhesive
quickly and securely bonds
difficult to hold materials such as
laminates and polypropylene. The
spray pattern directs the adhesive
right where you want it. The
adjustable spray tip lets you vary
width and delivery rate.
1–15 minute bonding range at room
temperature. Resistance: 160ºF.
Translucent in color.
PL 400™ HEAVY-DUTY
SUB-FLOOR ADHESIVE
Size
16.5OZ
PL 400™ construction adhesive is
an indoor / outdoor synthetic
rubber adhesive for bonding
plywood subfloors to wood floor
joists. This excellent field-applied
adhesive makes a flooring system
that is less expensive than
non-glued systems and is
stronger, stiffer and quieter.
10.2OZ
29OZ
EA
EA
92PL10
92PL29
PL 400™ can be used on all types of wood,
treated lumber, ceramic tile, including subfloors,
stair treads, slate floors, paneling, wood floors,
furring strips, decks and patios, wallboard, and
lap siding.
VOC approved latex based.
DAP BUTYL-FLEX®
GUTTER & FLASHING
RUBBER ADHESIVE
Size
Color
Qty
Code
10OZ
White
EA
92CBUW
Lasts up to 5 times longer than oil
based caulks. No painting
required. USDA authorized use for
federally inspected meat &
poultry plants. Meets Fed. Spec.
TTS-001657,
Type I, CID-A-A-272. Type III.
4
415-824-4300
PHENOSEAL™ ADHESIVE CAULK
The phenolic-vinyl caulking
adhesive rugged, permanently
flexible, heat resistant and
waterproof. Phenoseal™ bonds
wood, tile, metal, glass,
fiberglass, stone, almost any
material to any other material.
Forms wood joints stronger than
wood itself. Does not crystallize or
crumble. Completely unaffected by
exposure to sunlight, salt, water,
gasoline, oil, mild acids, and
alkalis. Water based and
environmentally safe.
DAP™ FIRE STOP SEALANT
• Classified for sealing around
plumbing and wiring.
Size
Color
Qty
Code
10OZ
Transparent
White
Dark Brown
EA
92CPHT
92CPHW
92CPHR
Size
Color
Qty
Code
92CFIR
• Penetrates through fire rated
walls and floors.
• One part silicone.
• Crack resistant.
• Non slumping.
• Not for fireplaces.
EXTEND HD SEALANT
• Extend DH is a thermoplastic sealant
comprised of flexible rubbers and resins. It
offers excellent adhesion to most building
materials and It’s exterior performance is
enhanced by a stabilizer package to resist
U.V. degradation.
Size
Color
Qty
Code
10.5OZ
White
EA
92CEXT
Size
Color
Qty
Code
White
Alum Grey
Bronze
EA
92C23W
92C23G
92C23B
• For use on Fiber Cement siding.
• OSB
• Metals
• Vinyl
• Hardboard
• Pressboard
• Siding
DAP™ “230” SEALANT
Silicone performance with latex
offer ease of use. It is the first latex
sealant to withstand 50% total joint
movement. Outperforms silicone in
overall performance. Permanent
adhesion, lifetime flexibility and 50
year durability. Paintable. Water
cleanup. Every color meets the
performance requirements of Fed.
Spec. TT-S-00230C, Type II, Class A.
415-824-4300
10.5OZ
5
SIKAFLEX-1a™
Sikaflex-1a is a 1 component, moisture-cured,
non-sag, permanently flexible polyurethane
sealant that is self-priming with most
construction materials. It has demonstrated
excellent resistance to aging and weathering in
varied climates around the world. It resists
attack from dilute acids and alkalines, jet fuel,
water, and residential sewage.
Curing to a flexible consistency with exceptional
cut and tear resistance, Sikaflex-1a™ offers
superior performance when used between
elements with dissimilar coefficients of
expansion: concrete, wood, glass, steel,
aluminum, copper, ceramics, brick, asbestos,
cement, polyester and epoxy.
Size
Color
Qty
Code
10.3OZ
White
Bronze
Grey
Tan
Black
EA
92CSEW
92CSEB
92CSEG
92CSET
92CSEBL
Size
Qty
Code
29OZ
EA
4007SL
Size
Color
Code
10.1OZ
Clear
92CSIL
SURPRESS ACOUSTICAL SEALANT
Use Supress Acoustical Sealant
at panel edges and around any
cut-outs for electrical boxes,
pipes, sprinklers, etc.
DOW CORNING™ SILICONE SEALERS
With a limited lifetime warranty,
the 100% silicone sealant
protects and seals with 100%
silicone rubber. Waterproof and
weatherproof. Won‘t crack,
crumble or dry out. Meets Red.
Spec. TT-S-001543A, Class A.
Meets requirements of FDA
Regulation Number 21 CFR
177.2600. CID-A-A-272. Type IV.
LEXEL®
The ultra-clear caulk in a seethrough tube. New technology
beyond silicone. It’s clearer,
tougher, and stronger than
silicone. Firmly binds to almost
any surface. Paintable and
mildew resistant. Available in
clear and white.
6
Size
Color
Qty
Code
10.5OZ
Clear
White
EA
92CLXC
92CLXW
415-824-4300
ALEX PLUS™ ACRYLIC LATEX
WITH SILICONE
Size
10.1OZ
Superior quality, moisture/mildew
resistant caulk. Lasts for 25 years
or more. Paintable. USDA
authorized for federally-inspected
meat and poultry plants. Exceeds
ASTM. C-834-76, CID-A-A-272,
Type II.
BLACK JACK FIBERED PLASTIC
ROOF CEMENT, WET OR DRY
Color
Qty
Code
Almond
Black
Brown
Cedar Tan
Clear
Slate Gray
White
EA
92CLAL
92CLBL
92CLBR
92CLCE
92CLCL
92CLSG
92CLWH
Size
Waterproof. Forms a tight, strong
seal. As easy to use on dry as
damp surfaces.
1GAL
5GAL
10OZ tube
PROTECTO SEALANT 25XL
POLYURETHANE WINDOW
AND DOOR INSTALLATION
SEALANT
Protecto Sealant 25XL is a high
performance, low modulus,
one-comonent, moisture curing,
polyurethane sealant. Protecto
Sealant 25XL is a waterproof
sealant that offers excellent
performance for back bedding nail
flanges for window and door
installation and sealing door
thresholds. Protecto Sealant 25XL
is used exclusively with the new
Protecto Sill Drainage System.
Qty
Code
EA
93WET1
93WET5
93WET2
Size
Color
Qty
Code
11OZ
White
EA
92CPS25
Features
• 100% compatible with Protecto Wrap window and
door sealing tape
• Aggressive adhesion to a variety of window
substrates including wood, vinyl and aluminum
• Provides a strong, durable, weather resistant bond to
most building substrates
• Mold and UV resistive
• Fast cure and solvent free formulation
• Excellent long-term weather resistance
• Meets AAMA and ASTM sealant standards
DEVCON’S TRIMBONDER™
Qty
AZEK Trimboards has aligned with
Devcon, a leading industrial
adhesive manufacturer, in the
promotion of their unique
two-part strucural acrylic
ashesive “TrimBonder”.
EA
EA
Code
6
10
92CAZEK
92NAZEK
bond AZEK material to other substates. Applied with a regular caulk
gun, TrimBonder is durable, permanent, UV stable, waterproof, and
can withstand harsh weather without shinking, discoloring or
yellowing. An adhesive that permanently bonds AZEK Trimboards,
metals, wood, and PVC.
TrimBonder is a perfect solution
to filling nail holes and gaps in
AZEK applications. TrimBonder
can also be used to join sections
on AZEK products together or to
415-824-4300
Case Qty
Applications
• Fills nail holes
• Fills gaps & joints
• Bonds all AZEK Trimboard products
7
Features
• Fits standard caulking gun
• Easily sands & paints well
• UV stable & waterproof
CAULKING GUNS
Economy ratchet style guns
with enamel finish to fit
standard size tubes.
Size
Length
Qty
Code
11OZ
30OZ
9”
13.5”
EA
EA
92CG11
92CG30
QUIKRETE® NO.9902 CONCRETE
BONDING ADHESIVE (LATEX)
Size
Qty
Code
1QT
1GAL
EA
Penetrates pores of old concrete,
forming a chemical bond for new
concrete. Roughing old surfaces
is unnecessary.
JIFFY SEAL CAULK
J.S.-160H MASTIC
Size
• SBS rubber modified.
10.5OZ
EA
Color
91WAD11
91WAD12
Qty
Code
EA
91JS160
Qty
Code
EA
91JS80
• Heavy duty, cold applied
bituminous coating.
JIFFY SEAL MEMBRANE PRIMER #80
Size
• #80 primer is an asphalt base
primer for use on all horizontal
applications above 40˚F.
Color
1GAL
• Coverage is 125-225 sq. ft.
Size
• #100 primer is a high tack
SBS rubber base primer.
1GAL
Color
Qty
Code
EA
91JS90
• It is used on all vertical
surfaces before application of
membrane and on all surfaces
wit temperatures between
25˚F and 40˚F.
8
415-824-4300
DUROCK™ ADHESIVE
Water-based mastic for ceramic and
mosaic tile installation on interior
walls. High strength, water-resistant,
non-slip formula for use on wallboard,
wonderboard, exterior grade plywood,
hardboard and masonry surfaces. Easy
trowelability and clean-up.
Size
Qty
1QT
1GAL
EA
Code
94TTIQ
94TTIG
TEC EZ LEVEL TA323
• Self leveling underlayment.
Size
Code
• Pourable, Latex-modified selfleveler. Ideal for large areas.
50lb sack
92ATEC
Size
Code
1GAL
92ATEC1
• For ceramic, natural stone,
marble tile, carpet, and wood.
• Pour, pump, squeegee, or
guged spreader.
• Interior use.
• Must use TA 861 primer.
See instructions.
TEC SURFACE
PREP & PRIMER TA 861
• Acrylic latex based primer and
patch additive.
• Improves adhesion and bond
strengths and flexural strengths.
• Provides freeze/thaw resistance.
• Approved for exterior use.
• Must be used with EZ Level
compound TA323.
• Covers 300–500 sq. ft.
DAP™ FAST‘N FINAL®
ALL-PURPOSE
Specially formulated for outdoor
use. Lightweight. One fill, no
sanding. Won‘t crack or shrink.
Repairs stucco, concrete, brick
and wood.
DAP™ KWIK FOAM® INSULATING
SEALANT
A one component, moisture cure,
polyurethane foam insulation that
expands to economically fill and
seal large cavities. It stops air
infiltration and will not degrade or
shrink. Kwik Foam® contains a
flame retardant and meets
Montreal Protocol 1987.
415-824-4300
Size
Qty
Code
1QT
EA
92ASPA
Size
Qty
Code
20OZ
EA
90FOAM
SEALANT
9
DOW GREAT STUFF®
BIG GAP FILLER SEALANT
Triple expanding polyurethane
insulating foam sealant with a
straw applicator. Fills, seals and
insulates gaps, cracks and holes
greater than 1/2 inch. Cures
rigid. Cream color foam.
DOW GREAT STUFF®
GAPS & CRACKS SEALANT
Minimal expanding polyurethane
insulating foam sealant with a
straw applicator. Fills, seals and
insulates gaps, cracks and holes
up to 1/2 inch. Cures rigid.
Cream color foam.
DOW GREAT STUFF®
WINDOW & DOOR SEALANT
Minimal expanding low-pressure
formulation flexible polyurethane
foam sealant with a straw
applicator. Perfect for sealing
window and door frame
openings. Also ideal for sealing
areas where low-pressure
flexible foam is desirable. Cures
flexible. Yellow color foam.
FIXALL®
FIXALL® is used to repair cracks
and holes in plaster, gypsum
wallboard and wood surfaces. It
has high compressive strength
and, therefore, makes an
excellent floor under-layment for
patching and leveling prior to
installation of resilient floorcoverings. In addition, it can be
used for models and in molds.
WOOD PATCH
An all purpose highly effective
plastic putty for wood repair.
Accepts all stains and finishes.
Patches hole and surface cracks
in all woods.
10
Size
Qty
20OZ
EA
Size
Qty
20OZ
EA
Size
Qty
12OZ
EA
Size
Qty
4.5#
25#
EA
EA
Code
90FOAM1
Code
90FOAM2
Code
90FOAM3
Code
92AFIX
92AFIZ
Size
Color
Qty
Code
4OZ
4OZ
4OZ
4OZ
4OZ
16OZ
16OZ
16OZ
16OZ
16OZ
Birch
Maple
Red Oak
Redwood
White
Birch
Maple
Red Oak
Redwood
White
EA
WF006B
WF006M
WF006O
WF006R
WF006W
WF012B
WF012M
WF012O
WF012R
WF012W
415-824-4300
COLOR PUTTY
Makes wood finishing easier.
Stain wood (if necessary), seal or
varnish, fill nail holes and
imperfections with correct shade
of color putty. Finish with coat of
seal or varnish (except epoxy).
3.68OZ jars.
COLOR FILL KIT
• Laminate floor repairer and
joint filler.
Size
Color
Qty
Code
1LB
White
Lt Birch
Lt Oak
EA
WF16WH
WF16LB
WF16LO
Size
Color
Qty
Code
Beech Black
Beech Plank
Blue
Green
Maple
White Oak
Alder
White Beech
Merbau
Pine
Red Oak
Cherry
EA
6FGFA11
6FGFA12
6FGFA13
6FGFA15
6FGFA17
6FGFA19
6FGFA20
6FGFA21
6FGFA23
6FGFA24
6FGFA25
6FGFA26
Color
Qty
Code
Med Walnut
Dark Brown
Red Mahogany
Cherry Vale
Natural
Heritage Oak
Off-White
EA
WF17WA
WF17BR
WF17BM
WF17CH
WF17NA
WF17OA
WF17WH
• Repairs chips and scratches.
• No mixing required.
• Includes solvent.
STAR® FIL-STIK®
Size
Easy to use, semi-hard Fil-Stik®.
Repairs minor scratches and
nicks. Simply rub in and wipe off.
Made to be finished over with
lacquers, enamels, varnishes, or
simply buffed.
BONDO® ALL PURPOSE
WOOD FILLER
Repairs cracks, refills holes,
patches and seals. Good for
wood, concrete, brick, metal,
stone, sheetrock and plastic.
Size
Qty
Code
1QT
1GAL
EA
WF4000
WF4010
Size
Qty
Code
1GAL
EA
6FM0GI
GOOP-ON®
The modern wood, hole and crack
filler. Stainable and sandable; can
be used on exteriors as well as
interiors. Will adhere to metal,
glass, plaster, wood, furniture, etc.
Perfect for new and unfinished floor
installations.
415-824-4300
11
EPOXY
BORA-CARE®
For use in and around homes, apartments,
garages, museums, public and private
institutions, schools, hotels, hospitals,
kennels, stables, form buildings, trucks,
trailers, warehouse, supermarkets,
restaurants, and food processing plants.
Size
Code
1QT
WCBC00
For prevention and control of:
• Termites
• Carpenter Ants
• Wood Destroying Beetles
• Decay Fung
RESTOR-IT™ EPOXY FILLER
Size
Badly deteriorated wood and
missing wood fiber can now be
repaired with Restor-It™ Flexible
Epoxy Filler. Gaps, cracks, holes
and any missing portion of wood
can be filled and re-used,
eliminating the need to replace
existing wood.
2PT kit
1GAL kit
Code
WR2000
WR2001
Once Restor-It™ Flexible Epoxy
Filler is applied and cured, wood
surface becomes usable again.
Maximum adhesion bonds wood
back together providing a
sandable, nailable, drillable,
carvable surface ready
to paint, stain or varnish.
Restor-It™ protects wood in
all temperatures and weather
conditions. Surface readily accepts
oil based primers, top coats and
water-based latex paints.
RESTOR-IT™ EPOXY SEALER
(PART A&B)
Size
Turns soft, rotted wood hard and
usable again. Stops rot and other
damage from spreading.
2QT kit
12
Code
WR1000
415-824-4300
EPOXY
RESTOR-IT™ EPOXY CLEANUP
SOLVENT
Size
1PT can
Code
WR3000
SIMPSON ET 22 EPOXY ADHESIVE
Advantages:
Size
Code
• Easy to use: gel consistency
allows horizontal or vertical use.
22OZ
9ET220
Gun
Code
• Reduced shrinkage: shrinkage
during cure is from 1% to 2%.
• Moisture resistant: a chemical
anchor that is resistant to
hydrolyzation.
• Corrosion protection: ET
compound seals the hole and
encapsulates the embedded
portion of the threaded rod.
Installation:
• ET may be installed in concrete,
brick or masonry. Check for proper
mixture, a uniform gray color,
before using. ET will not form an
adhesive bond when dispensed as
black or white.
9EDT22
Nozzle & Nut
• Codes: ICBO NO. 4945; SBCCI
94145; City of L.A. NO. RR25120,
RR 25185 (ET22 and ET56.)
Code
9EMN22
Brushes
Code
99CC06
SIMPSON SET PAC™ EPOXY-TIE ADHESIVE
• For use in base material 45ºF
to 100ºF.
• Works with standard caulking gun.
• Mixes with an electric drill.
• ICBO Building Code listed.
415-824-4300
13
Size
Code
10OZ
9SETPA
FASTENERS
MACHINE (HEX) BOLTS
Hot Dipped Galvanized
1⁄2”
11⁄2”
2”
21⁄2”
3”
31⁄2”
4”
41⁄2”
5”
51⁄2”
6”
61⁄2”
7”
71⁄2”
8”
81⁄2”
10”
12”
99MG414
99MG420
99MG424
99MG430
99MG434
99MG440
99MG444
99MG450
99MG454
99MG460
99MG464
99MG470
99MG474
99MG480
99MG484
99MG410
99MG412
Diameter
5⁄8”
99MG530
99MG534
99MG540
99MG544
99MG550
99MG554
99MG560
99MG564
99MG570
99MG574
99MG580
99MG584
99MG510
99MG512
3⁄4”
99MG634
99MG640
99MG644
99MG650
99MG654
99MG660
99MG664
99MG670
99MG674
99MG680
99MG684
99MG610
99MG612
Zinc Plated
1⁄2”
3⁄4”
1”
11⁄2”
2”
21⁄2”
3”
31⁄2”
4”
41⁄2”
5”
51⁄2”
6”
61⁄2”
7”
71⁄2”
8”
81⁄2”
9”
10”
12”
1⁄4”
3⁄8”
99M204
99M206
99M210
99M214
99M220
99M224
99M230
99M234
99M240
99M244
99M304
99M306
99M310
99M314
99M320
99M324
99M330
99M334
99M340
99M344
99M350
99M354
99M360
1⁄2”
99M406
99M401
99M414
99M420
99M424
99M430
99M434
99M440
99M444
99M450
99M454
99M460
99M464
99M470
99M474
99M480
99M484
99M410
99M412
14
Diameter
5⁄8”
99M514
99M520
99M524
99M530
99M534
99M540
99M544
99M550
99M554
99M560
99M564
99M570
99M574
99M580
99M584
99M590
99M510
99M512
3⁄4”
7⁄8”
1”
99M620
99M624
99M630
99M634
99M640
99M644
99M650
99M654
99M660
99M664
99M670
99M674
99M680
99M724
99M730
99M734
99M740
99M744
99M750
99M754
99M760
99M764
99M770
99M774
99M780
99M830
99M834
99M840
99M844
99M850
99M854
99M860
99M864
99M870
99M874
99M880
99M690
99M610
99M612
99M790
99M710
99M712
99M810
99M812
415-824-4300
FASTENERS
CARRIAGE BOLTS
3⁄8”
31⁄2”
4”
41⁄2”
5”
51⁄2”
6”
61⁄2”
7”
8”
10”
99CG334
99CG340
99CG344
99CG350
99CG354
99CG360
99CG364
99CG370
99CG380
1⁄2”
Diameter
5⁄8”
99CG440
99CG444
99CG450
99CG454
99CG460
99CG470
99CG480
99CG544
99CG550
99CG554
99CG560
99CG570
99CG580
99CG510
Zinc Plated
1”
11⁄2”
2”
21⁄2”
3”
31⁄2”
4”
41⁄2”
5”
51⁄2”
6”
61⁄2”
7”
71⁄2”
8”
10”
415-824-4300
15
1⁄4”
3⁄8”
99C210
99C214
99C220
99C224
99C230
99C234
99C240
99C244
99C250
99C254
99C260
99C310
99C314
99C320
99C324
99C330
99C334
99C340
99C344
99C350
99C354
99C360
99C364
99C370
99C374
99C380
Diameter
1⁄2”
5⁄8”
99C414
99C420
99C424
99C430
99C434
99C440
99C444
99C450
99C454
99C460
99C464
99C470
99C514
99C520
99C524
99C530
99C534
99C540
99C544
99C550
99C554
99C560
99C564
99C570
99C480
99C410
99C580
99C510
FASTENERS
LAG SCREWS
1⁄4”
11⁄2”
2”
21⁄2”
3”
31⁄2”
4”
41⁄2”
5”
51⁄2”
6”
61⁄2”
7”
71⁄2”
8”
10”
12”
99LG214
99LG220
99LG224
99LG230
99LG234
Diameter
1⁄2”
99LG314
99LG320
99LG420
99LG324
99LG424
99LG330
99LG430
99LG334
99LG434
99LG340
99LG440
99LG344
99LG444
99LG350
99LG450
99LG454
99LG360
99LG460
99LG464
99LG370
99LG470
3⁄8”
99LG380
99LG480
99LG410
99LG412
5⁄8”
99LG520
99LG524
99LG530
99LG534
99LG540
99LG544
99LG550
99LG554
99LG560
99LG564
99LG570
99LG574
99LG580
99LG510
99LG512
3⁄4”
99LG624
99LG630
99LG634
99LG640
99LG650
99LG660
99LG670
99LG680
99LG610
Zinc Plated
1⁄4”
1”
11⁄2”
13⁄4”
2”
21⁄2”
3”
31⁄2”
4”
41⁄2”
5”
51⁄2”
6”
61⁄2”
7”
71⁄2”
8”
10”
12”
16
99L210
99L214
99L216
99L220
99L224
99L230
99L234
99L240
3⁄8”
99L314
99L316
99L320
99L324
99L330
99L334
99L340
99L344
99L350
99L360
99L370
99L380
Diameter
1⁄2”
5⁄8”
99L414
99L514
99L420
99L424
99L430
99L434
99L440
99L444
99L450
99L454
99L460
99L464
99L470
99L474
99L480
99L410
99L412
99L520
99L524
99L530
99L534
99L540
99L544
99L550
99L554
99L560
99L564
99L570
99L574
99L580
99L510
99L512
3⁄4”
99L624
99L630
99L634
99L640
99L644
99L650
99L654
99L660
99L664
99L670
99L680
99L610
415-824-4300
FASTENERS
HEX NUTS
Code
3⁄8”
99HNG03
99HNG04
99HNG05
99HNG06
99HNG07
99HNG08
99HNG11
1⁄2”
5⁄8”
3⁄4”
7⁄8”
1”
11⁄8”
Zinc Plated
Code
1⁄4”
99HN02
99HN03
99HN04
99HN05
99HN06
99HN07
99HN08
99HN11
3⁄8”
1⁄2”
5⁄8”
3⁄4”
7⁄8”
1”
11⁄8”
WASHERS
Code
3⁄8”
99HWG03
99HWG04
99HWG05
99HWG06
99HWG07
99HWG08
99HWG11
1⁄2”
5⁄8”
3⁄4”
7⁄8”
1”
11⁄8”
Zinc Plated
Code
#6
#8
#10
1⁄4”
3⁄8”
1⁄2”
5⁄8”
3⁄4”
7⁄8”
1”
11⁄8”
HDG SQUARE WASHERS
Size
Heavy-duty, Hot Dipped Galvanized
reinforcing washers.
415-824-4300
99HW00
99HW01
99HW01A
99HW02
99HW03
99HW04
99HW05
99HW06
99HW07
99HW08
99HW11
2”x 2”x ⁄ ”
21⁄2”x 21⁄2”x 1⁄4”
3”x 3”x 1⁄4”
3”x 3”x 1⁄2”
31⁄2”x 31⁄2”x 3⁄8”
3 16
17
Hole Diameter
Code
⁄”
⁄”
3⁄4”
7⁄8”
1”
99SW22
99SW24
99SW30
99SW70
99SW80
12
58
FASTENERS
MALLEABLE WASHERS
Code
3⁄8”
99MW03
99MW04
99MW05
99MW06
1⁄2”
5⁄8”
3⁄4”
COUPLING NUTS
Zinc Plated
Code
1⁄2”
99HC04
99HC05
99HC06
99HC07
99HC08
99HC11
5⁄8”
3⁄4”
7⁄8”
1”
11⁄8”
THREADED RODS
Diameter
3"
10"
1⁄2”
5⁄8”
3⁄4”
7⁄8”
99TR04G
99TR41G
99TR05G
99TR51G
99TR06G
99TR60G
99TR07G
1”
99TR08G
11⁄8”
99TR11G
1”
99TR08
99TR68
11⁄8”
99TR11
99TR61
Zinc Plated
3"
6"
10"
1⁄2”
5⁄8”
99TR04
99TH64
99TR41
99TR05
99TR65
99TR51
18
Diameter
3⁄4”
7⁄8”
99TR06
99TR07
99TR66
99TR67
99TR60
415-824-4300
FASTENERS
SCREW COVER CAPS
Size
Flexible plastic screw caps give a
flush finish to broad surfaces.
Flexible grooved pegs with hollow
core ensure a firm hold on screw
races. Use finger or hammer to
tap into screw head. Fits any #2
square drive or phillips drive.
Qty
Code
EA
94BB00
Size
Qty
Code
1”
11⁄4”
15⁄8”
2”
21⁄2”
3”
33⁄4”
41⁄2”
5”
6”
1m/BOX
500/BOX
500/BOX
200/BOX
200/BOX
200/BOX
75/BOX
50/BOX
50/BOX
50/BOX
94SB10
94SB12
94SB15
94SB20
94SB24
94SB30
94SB36
94SB44
94SB50
94SB60
#2 Square
#2 Phillips
DRYWALL SCREWS,
FINE THREAD
Zinc yellow*.
Original and primary application of
drywall to 20–25 gauge metal
studs. Also known as “all purpose”
screws.
*Gold/yellow head meets user
cosmetic or rust preventive requirements.
DRYWALL SCREWS,
SELF-DRILL
Bugle head - zinc plate.
Recommended for application of
drywall or gyp board to 12-20
gauge metal studs.
Size
Qty
Code
1”
11⁄4”
15⁄8”
2”
21⁄2”
3”
33⁄4”
41⁄2”
5”
6”
10m/CASE
8m/CASE
5m/CASE
3.5m/CASE
2.5m/CASE
2m/CASE
500/CASE
500/CASE
500/CASE
500/CASE
94SC10
94SC12
94SC15
94SC20
94SC24
94SC30
94SC36
94SC44
94SC50
94SC60
Size
Qty
Code
11⁄4”
15⁄8”
23⁄8”
3”
500/BOX
500/BOX
200/BOX
200/BOX
94VB12
94VB15
94VB23
94VB30
Size
Qty
Code
11⁄4”
8m/CASE
5m/CASE
3m/CASE
2m/CASE
94VC12
94VC15
94VC23
94VC30
15⁄8”
23⁄8”
3”
415-824-4300
19
FASTENERS
PARTICLE BOARD SCREWS,
COARSE THREAD
Zinc yellow*.
Original and primary application of
drywall to wood studs. Also used in
many interior/exterior fixture
fastening applications.
*Gold/yellow head meets user
BUILDER SCREWS
Dacromate plating, coarse
threading.
Used for any exterior fastening
including decks, fences, shade
structures. Not recommended for
use in pressure treated wood.
20
Size
Qty
Code
1”
11⁄4”
11⁄2”
15⁄8”
2”
21⁄2”
3”
250/BOX
250/BOX
250/BOX
250/BOX
200/BOX
200/BOX
200/BOX
94PB10
94PB12
94PB14
94PB15
94PB20
94PB24
94PB30
Size
Qty
Code
1”
11⁄4”
11⁄2”
15⁄8”
2”
21⁄2”
3”
10m/CASE
8m/CASE
6.5m/CASE
5m/CASE
3.5m/CASE
2.5m/CASE
2m/CASE
94PC10
94PC12
94PC14
94PC15
94PC20
94PC24
94PC30
Size
Qty
Code
1”
11⁄4”
15⁄8”
2”
21⁄2”
3”
31⁄2”
33⁄4”
4”
5”
6”
250/BOX
250/BOX
250/BOX
200/BOX
200/BOX
200/BOX
75/BOX
75/BOX
50/BOX
50/BOX
50/BOX
94BB10
94BB12
94BB15
94BB20
94BB24
94BB30
94BB34
94BB36
94BB40
94BB50
94BB60
Size
Qty
Code
1”
11⁄4”
15⁄8”
2”
21⁄2”
3”
31⁄2”
33⁄4”
4”
5”
6”
10m/CASE
8m/CASE
5m/CASE
3.5m/CASE
2.5m/CASE
2m/CASE
1m/CASE
1m/CASE
1m/CASE
.5m/CASE
.5m/CASE
94BC10
94BC12
94BC15
94BC20
94BC24
94BC30
94BC34
94BC36
94BC40
94BC50
94BC60
415-824-4300
FASTENERS
BUILDER SCREWS
SELF-DRILL/NIBBED HEAD
Dacromate plating exterior
fastening requirements. Self drill
point wont split wood. Nibbed head
to aid in self countersinking. Coarse
thread for high holding power.
Size
Qty
Code
15⁄8”
2”
21⁄2”
3”
31⁄2”
200/BOX
200/BOX
200/BOX
200/BOX
75/BOX
94AB15
94AB20
94AB24
94AB30
94AB34
Size
Qty
Code
15⁄8”
5m/CASE
3.5m/CASE
2.5m/CASE
2m/CASE
1m/CASE
94AC15
94AC20
94AC24
94AC30
94AC34
2”
21⁄2”
3”
31⁄2”
FINISH SCREWS
Self-drilling point, won’t split wood,
holds tight, suitable for exterior use,
rust resistant dichromate plating,
small square drive head.
FINISHING SCREWS,
STAINLESS STEEL
Superior corrosion resistance. Ideal
for fastening corner boards, mitered
ends and toe nailing-type
applications (pre-drilling a must
near board ends).
415-824-4300
21
Size
Qty
Code
15⁄8”
21⁄4”
3”
500/BOX
250/BOX
250/BOX
94TB15
94TB22
94TB30
Size
Qty
Code
15⁄8”
21⁄4”
3”
5m
4m
2m
94TC15
94TC22
94TC30
Size
Qty
Code
1”
15⁄8”
21⁄4”
3”
100/BOX
94ST10
94ST15
94ST22
94ST30
FASTENERS
Size
ACQ PT LUMBER SCREWS
Qty
Code
15⁄8”
5m
3.5m
2.5m
2m
94PTC15
94PTC20
94PTC24
94PTC30
Qty
Code
6” x 15⁄8”
6” x 2”
8” x 21⁄2”
8” x 3”
200 EA
200 EA
200 EA
200 EA
94PTB15
94PTB20
94PTB24
94PTB30
6” x
6” x 2”
8” x 21⁄2”
8” x 3”
Square Type 17 “W.A.R. Coated”.
Introducing WAR coated deck
screws specially coated, tested,
and designed to work with the new
ACQ-treated lumber.
Size
MAZE ZINCLAD® SCREWS
Size
Qty
Code
Hot-dipped zinc-coated to insure
dependable corrosion resistance.
These case-hardened screws are
hot-dipped in molten zinc to meet
the specifications of producers of
wood treatment chemicals.
Excellent for a wide variety of
outdoor uses such as decks, boat
docks, steps, patios, furniture,
fences, flower boxes, or any project
where long-term corrosionresistance and exceptional holding
power are required. Phillips head
sets flush. Use #2 Phillips driver for
easiest application. For best results,
screws should be driven in one
continuous motion. Avoid stopping
and restarting. Pre-drilling of holes is
helpful but frequently not necessary.
2”
21⁄2”
3”
5850/CASE
5000/CASE
4507/CASE
94CC20
94CC24
94CC30
Size
Qty
Code
585 EA 5#
500 EA 5#
APPX 450 EA 5#
94CB20
94CB24
94CB30
2”
21⁄2”
3”
22
APPX
APPX
415-824-4300
FASTENERS
DECK SCREWS,
STAINLESS STEAL
SQUARE DRIVE
Size
A very good fastener for wood
exposed to weather and outdoor
construction projects that call for
superior corrosion resistance.
WOOD SCREWS,
FLAT HEAD PHILLIPS &
ROUND HEAD SLOTTED
Qty
Code
15⁄8”
EA
15⁄8”
15⁄8”
15⁄8”
2”
2”
2”
2”
21⁄2”
21⁄2”
21⁄2”
21⁄2”
3”
3”
3”
3”
100PC
CASE/6500PC
5#/1070PC
94SS15
94SS15A
94SS15B
94SS15C
94SS20
94SS20A
94SS20B
94SS20C
94SS24
94SS24A
94SS24B
94SS24C
94SS30
94SS30A
94SS30B
94SS30C
EA
100PC
CASE/3500PC
5#/592PC
EA
100PC
CASE/2500PC
5#/418PC
EA
100PC
CASE/2000PC
5#/340PC
Style
Code
Flat Head
Round Head
F94FHWS
F94RHWS
Size
1⁄2”
3⁄4”
1”
11⁄4”
11⁄2”
2”
21⁄2”
3”
31⁄2”
4”
TAPPING SCREWS,
FLAT HEAD PHILLIPS &
PAN HEAD PHILLIPS
ZINC PLATED
#6
x
x
x
x
x
x
#8
x
x
x
x
x
x
x
x
#10
x
x
x
x
x
x
x
x
x
x
Style
Code
Pan Head
Flat Head
F94PHSM
F94FHSM
Size
1⁄2”
3⁄4”
1”
11⁄4”
11⁄2”
2”
21⁄2”
3”
415-824-4300
23
#12
x
x
x
x
x
x
x
x
x
x
#6
x
x
x
x
x
x
#8
x
x
x
x
x
x
#10
x
x
x
x
x
x
x
x
FASTENERS
PAN FRAMER SCREWS
Framing screw for 20–25GA metal
stud to track, unique grip-tite, pan
head. No. 2 phillips.
SELF-DRILL TAP
HEX HEAD SCREWS
Size
Qty
Code
7⁄16”
420
94PF76
Size
Zinc plated.
1⁄2”
3⁄4”
1”
11⁄4”
11⁄2”
Code
#6
x
x
x
#8
x
x
x
x
x
#10
x
x
x
x
x
F94HHTS
CONCRETE SCREWS
Size
Hex head and Phillips. For fastening
projects into concrete.
1⁄4 x 11⁄4”
1⁄4 x 13⁄4”
1⁄4 x 21⁄4”
1⁄4 x 23⁄4”
1⁄4 x 31⁄4”
1⁄4 x 4”
CONCRETE SCREWS
STAINLESS STEEL HEX HEAD
Hex
Phillips
99SH12
99SH16
99SH22
99SH26
99SH32
99SH40
99SP12
99SP16
99SP22
99SP26
99SP32
99SP40
Size
For fastening pressure treated
lumber to concrete.
Code
1⁄4 x 11⁄4”
99SSH12
99SSH16
99SSH22
99SSH26
99SSH32
99SSH36
1⁄4 x 13⁄4”
1⁄4 x 21⁄4”
1⁄4 x 23⁄4”
1⁄4 x 31⁄4”
1⁄4 x 33⁄4”
STAR BIT TIP
Size
#25 - 2”
#10 - 2”
24
For
Pkg
8-10-12
6-7
2EA
1EA
Code
DW2215
DW2215A
415-824-4300
FASTENERS
DUROCK SCREWS
Designed for fastening fiber cement
board to wood.
Size
Qty.
Code
11⁄4”
Recommended for:
• Fiber cement board to wood.
• Lap siding.
• Fiber cement roofing trim.
• Flooring for tile in kitchen
and bath.
15⁄8”
21⁄4”
100PCS
100PCS
100PCS
94DS12
94DS15
94DS22
Size
Qty.
Code
100PCS
5#/725PCS
100PCS
5#/697PCS
100PCS
5#/627PCS
100PCS
5#/418PCS
100PCS
5#/348PCS
100PCS
5#/325PCS
100PCS
5#/255PCS
94SP14
94SP14A
94SP16
94SP16A
94SP20
94SP20A
94SP24
94SP24A
94SP26
94SP26A
94SP31
94SP31A
94SP40
94SP40A
PHEINOX™ SCREWS
R4 patented stainless steel
Starhead. Made of PHE hardened
stainless steel. Lifetime warranty
against corrosion. Self-tapping,
countersunk head with W-Cut
thread design and Zip-Tip.
9x
11⁄2”
9 x 13⁄4”
9 x 2”
10 x 21⁄2”
10 x 23⁄4”
10 x 31⁄8”
10 x 4”
FASTEN MASTER™ COMPOSITE
WOOD DECK SCREW
Specially designed to eliminate the
“mushrooming” effect caused by standard
deck screws in composite deck materials.
415-824-4300
Size
Color
Pkg
Code
21⁄2”
Brown
Grey
Redwood
Brown
Grey
Redwood
Brown
Grey
Redwood
Brown
Grey
Redwood
Brown
Grey
Redwood
5# 350EA
5# 350EA
5# 350EA
case 1750EA
case 1750EA
case 1750EA
1# 75EA
1# 75EA
1# 75EA
5# 350EA
5# 350EA
5# 350EA
case 1750EA
case 1750EA
case 1750EA
94ZB24A
94ZG24A
94ZR24A
94ZB24B
94ZG24B
94ZR24B
94ZB30
94ZG30
94ZR30
94ZB30A
94ZB30A
94ZR30A
94ZB30B
94ZG30B
94ZR30B
21⁄2”
21⁄2”
21⁄2”
21⁄2”
21⁄2”
3”
3”
3”
3”
3”
3”
3”
3”
3”
25
FASTENERS
PHILLIPS INSERT BITS
Size
Code
#2 short
#2 long
#3 short
#3 long
DW2004
DW2022
DW2003
DW2023
SQUARE DRIVES
Size
Type
#1 short
#1 long
#2 short
#2 long
COMBO BITS
DOUBLE ENDED BITS
Finish screws
Finish screws
Deck screws
Deck screws
Size
Size
10”
12”
14”
WEDGE BOLT HEX HEADS
Size
For old concrete, block, brick, and
stove. Pre-assembled heavy duty
anchor with a finished hex head.
23⁄4”
3”
33⁄4”
4”
43⁄4”
5”
53⁄4”
6”
81⁄2”
26
DW2201
DW2211
DW2202
DW2212
Code
#2 Phillips/#8 Slotted
#2 Square/#2 Phillips
HDG FOUNDATION BOLTS
Code
DW2024
DW2214
Diameter
1⁄2”
5⁄8”
3⁄4”
99F410
99F510
99F512
99F514
99F610
99F612
99F614
Diameter
1⁄2”
99S426
5⁄8”
99S530
99S436
99S540
99S446
99S550
99S456
99S560
99S584
415-824-4300
FASTENERS
WEDGE ANCHORS
Size
Heavy duty one-piece wedge
anchor.
Diameter
1⁄4”
99R216
99R222
13⁄4”
21⁄4”
23⁄4”
3”
31⁄4”
31⁄2”
33⁄4”
41⁄4”
41⁄2”
5”
51⁄2”
6”
7”
81⁄2”
10”
12”
3⁄8”
1⁄2”
5⁄8”
3⁄4”
99R322
99R426
99R330
99R232
99R534
99R336
99R436
99R444
99R544
99R550
99R350
99R454
99R470
99R654
99R560
99R570
99R584
99R510
99R670
99R610
99R612
E-Z ANCOR
Size
Code
#8
HW0500
Toggler is a self-drilling toggle bolt for
heavy-duty anchoring to dry wall. With a
21⁄2”x #8 washer face phillips pan head
sheet metal screw.
Size
Code
TOGGLE BOLTS
Size
The E-Z Ancor is faster than any toggler. It
pilots and sinks itself, so you don’t need to
stud. No pre-drilling or hole preparation
necessary. It is easily backed out. Uses
standard #8 tapping (sheet metal) screw.
HEAVY DUTY TOGGLER
#8 x 21⁄2”
2”
3”
4”
LAG SHIELDS
Size
HW0600
Diameter
1⁄8”
94TG12
94TG13
94TG14
27
1⁄4”
94TG33
94TG34
94TG43
94TG44
Diameter
3⁄8”
415-824-4300
3⁄16”
13⁄4”
99E3S0
2”
21⁄2”
3”
99E3L0
1⁄2”
99E4S0
99E4L0
FASTENERS
BRADS/FINISH NAILS
16g Hitachi/Pas
Straight Pin
Code
1”
11⁄2”
2”
21⁄2”
98Y100
98Y140
98Y200
98Y240
18g Gal Finish
Straight Pin
Code
98ZP06
98ZP10
98ZP12
98ZP14
98ZP16
98ZP20
3⁄4”
1”
11⁄4”
11⁄2”
13⁄4”
2”
15g Hitachi/Senco Finish
Angled
Code
11⁄2”
98Z140
98Z160
98Z200
98Z240
13⁄4”
2”
21⁄2”
15g Hitachi/Senco Gal Finish
Angled
11⁄2”
13⁄4”
2”
21⁄2”
CORDLESS PASLODE 30º
FRAMER NAILS
Bright Smooth
[5M] 23⁄8” x .113”
[3M] 21⁄2” x .113”
[3M] 3” x .131”
[2.5M] 31⁄4” x .131”
98ZG14
98ZG16
98ZG20
98ZG24
8d
98ZPB23
Bright Ring
23⁄8” x .113”
Galvanized Ring
2 3⁄8” x .113”
3” x .131”
28
9d
10d
16d
98ZPB24
98ZPB30
98ZPB31
Galvanized Smooth
[3M] 3” x .120”
Code
8d
9d
10d
98ZPG30
16d
8d
98ZPR23
9d
10d
16d
8d
98ZPRG2
9d
10d
16d
98ZPRG3
415-824-4300
FASTENERS
Sinkers
GUN NAILS*
8d Cooler
98W208
23⁄8”x 113
3”x 131
31⁄4”x 131
10d Framer 16d Short
98W210
98W216
Hdg Box
8d Cooler 10d Framer 16d Short
98W208G
98W210G
98W216G
23⁄8”x 113
3”x 131
31⁄4”x 131
Eg Box
8d
98W308
23⁄8”x 113
3”x 131
31⁄4”x 131
10d
16d
98W310
98W316
Bright Common
2”x 113
21⁄2”x 131
3”x 148
31⁄2”x162
6d
98W107
8d
10d
16d
98W108
98W110
98W116
Hdg Common
8d
98W108G
21⁄2”x 131
3”x 148
31⁄2”x162
10d
98W110G
98W116G
Bright Ring
8d
23⁄8”x 113
10d
98W628
3”x131
98W629
Hdg Ring
8d
23⁄8”x 113
98W508
Bright Plywood
10d
21⁄8”x 148
98W624
Hdg Plywood
10d
23⁄8”x 148
98W624G
Maze Ring Siding Double Molten Zinc
2”x 113
21⁄2”x 113
3x113
*Fits the following Guns:
• Hitachi – NR83A
• Makita – AN8300
• ATRO – RHS921
• Halstead – HN34
• Duofast – CN350
• Haubold – RN90P11
• Senco – SN60
6d
98W706
98W710
3”x 128 Ring
3”x 128 Spiral
Joist Nail
11⁄2”x 148
29
10d
98W708
98W630
98W630G (Hdg)
HDG Joist Nail
415-824-4300
8d
Maze Decking Nail Double Molten Zinc
11⁄2”x 148
11⁄2”x 148
16d
98W630G
10d
98W700
98W704
FASTENERS
CORDLESS PASLODE
FINISH NAILS
CORDLESS PASLODE
BRADS
16g Finish Nail
Qty
11⁄4”
11⁄2”
13⁄4”
2”
21⁄2”
2M
2M
2M
2M
2M
16g Brad
Qty
3⁄4”
Angled Gal
Code
98XA02
98XA04
98XA06
98XA20
98XA24
Straight Gal
Code
5M
5M
5M
4M
2.5M
2.5M
2.5M
2.5M
1”
11⁄4”
11⁄2”
13⁄4”
2”
21⁄4”
21⁄2”
98XS06
98XS10
98XS12
98XS14
98XS16
98XS20
98XS22
98XS24
COMMON
Style
HDG are galvanized to resist
rusting and streaking. For general
construction, carpentry and
framing. Bright finish are for
general construction, carpentry and
framing. Our most popular and
versatile.
Code
6d
x
x
x
x
HDG 5#
HDG 50#
Bright 5#
Bright 50#
BOX
8d
x
x
x
x
10d
x
x
x
x
16d
x
x
x
x
20d
x
Style
Galvanized to resist rusting and
streaking. A thinner shank than
common rails reduces wood
splitting.
HDG 5#
HDG 50#
97GC00
98GC00
97BC00
98BC00
Code
3d
x
4d
x
6d
x
x
8d
x
x
10d
x
x
16d
x
x
97GB00
98GB00
FINISH
Style
Galvanized to resist rusting and
streaking, giving a smooth
appearance to finish carpentry and
trim. Bright finish are small in
diameter with cupped heads to
allow countersinking below wood
surface for later fitting.
HDG 5#
Bright 5#
Code
4d
x
x
6d
x
x
8d
x
x
16d
x
x
97GF00
97BF00
MAZE CASING NAILS
Style
Code
4d
5#
6d
8d
x
16d
x
30
97MC8D
97MC16D
415-824-4300
FASTENERS
VINYL SINKER
Size
The vinyl coating lubricates wood,
holds fast in framing. Easy driving
for sturdy, permanent construction.
Code
5#
50#
BRIGHT DUPLEX/SCAFFOLD
8d
x
x
16d
x
x
8d
x
x
16d
x
x
97VS00
98VS00
Size
Double headed nail driven into
wood up to the lower head. The
second head remains exposed to
allow easy pulling.
Code
5#
50#
97BD00
98BD00
JOIST
Style
A heavy gauge nail suitable for
supporting metal connection for
wood construction.
Code
11⁄2”
x
x
x
x
x
Galvanized 5#/9GA
Galvanized 50#/9GA
Bright 1#/9GA
Bright 1#/11GA
Bright 50#/9GA
97GJ00
98GJ00
96JH09
96JH11
98JH00
MAZE SPLITLESS SIDING
Size
Double molten zinc plating, specially
designed for split-prone woods.
Special blunt point virtually
eliminates splits.
5#
Code
6d
x
8d
x
10d
x
16d
x
97MSPL
MAZE HARDBOARD (BOX)
Size
Double molten zinc plating. Sturdy
shank drives easily. Checkered head
enhances paint adhesion.
415-824-4300
5#
31
Code
6d
x
8d
x
10d
x
97MHRD
FASTENERS
MAZE SPIRAL DECKING NAIL
Size
Double molten zinc for pressure
treated lumber. Producers of wood
treating chemicals recommend that
hot dipped zinc coated nails be
used. Spiral shank holds tight.
Code
12d
x
5#
97MDEK
STAINLESS SPIRAL DECKING
Size
Rust proof. Spiral grooved shank
like a screw prevents backing out.
Code
8d
x
5#
STAINLESS SIDING
RING SHANK
Size
Rust proof. For greater holding
power.
5#
10d
x
16d
x
97SD00
Code
3d
x
4d
x
6d
x
8d
x
10d
x
16d
x
97SS00
CONCRETE
Size
For attaching wood to concrete.
Code
21⁄2”
5#
DRITITE CUP HEAD
x
Size
For attaching drywall to
wood framing.
97CN24
Code
1⁄”
x
x
58
5#
50#
32
97DT00
98DT00
415-824-4300
FASTENERS
GALVANIZED ROOFING
Size
Wide head aids holding and reduces
pull through. For asphalt shingles,
roofing felt or insulation board.
5#
MAZE ROOFING
Code
11⁄2”
x
97RFOO
• Double hot-dip / galvanized.
Size
Length
Code
• Recommended and approved for
James-Hardie building products.
5#
2”
97RF20
CC RINGSHANK
Size
Cement coated and ringed for
greater holding power. For plywood
sheathing and plywood
underlayment.
MAZE PLASTIC-HED
YELLOW CAP NAILS
• Eliminates damage to roofing
felts, housewraps and foam
insullation
• Angular ring holds tight
415-824-4300
33
Code
5#
2”
x
97RS00
Size
PCS
Code
1”
11⁄4”
11⁄2”
200 pcs
200 pcs
300 pcs
97PHO1
97PHO2
97PHO4
Size
PCS
Code
11⁄4”
11⁄4”
11⁄2”
3000 pcs
3000 pcs
2000 pcs
98PHO1
98PHO2
98PHO4
FASTENERS
FURRING STUCCO NAIL
Size
Code
5#
WIRE BRADS
11⁄2”
97SN14
Size
Length
Code
2oz
3⁄4”
95WB06
95WB10
95WB12
1”
11⁄4”
POWDER ACTUATED
STANDARD PINS
Size
Zinc plated.
Code
100EA
ZX1000
ZX1001
ZX1002
ZX1003
ZX1004
ZX1005
ZX1006
ZX1007
1⁄2”
SP Series. Special hardened steel
fasteners.
3⁄4”
1”
11⁄4”
11⁄2”
2”
21⁄2”
3”
POWDER ACTUATED PIN
AND WASHER ASSEMBLY
Size
Pre-assembled washer and pin.
Adds holding power when
standard pin may pull through.
Recommended for attaching soft
or easily torn materials to wood
or steel.
Code
100EA
ZX1008
ZX1009
ZX1010
ZX1011
ZX1012
ZX1013
ZX1014
3⁄4”
1”
11⁄4”
11⁄2”
2”
21⁄2”
3”
POWER LOADS
.22 calibre load for low velocity
powder actuated tools.
25EA
ZX2000
ZX2001
ZX2002
ZX2003
ZX2004
ZX2005
ZX2006
ZX2007
Color
Load
Grey
Brown
Green
Yellow
Light
Medium
Strong
Heavy
25EA
ZX2008
ZX2009
ZX2010
ZX2011
ZX2012
ZX2013
ZX2014
Code
100EA
ZX1015
ZX1016
ZX1017
ZX1018
25EA
ZX2015
ZX2016
ZX2017
ZX2018
10 Strip
Green
Yellow
Red
34
ZX1019
ZX1020
ZX1021
415-824-4300
DOWELS/PLASTIC SHEETING
ZIPWALL™
QTY
Zipwal™l is ideal for:
• Floor finishing
• Carpentry
• Painting
• Demolition
• Asbestos abatement
• Window installation
EA
SIZE
Code
12’
ZIPWALL
How Zipwall works:
Zipwall is a Unique dust control
system that can save you
hundreds of hours on all kinds
of remodeling jobs: carpentry,
floor finishing, wall and
ceilings, painting, sheetrock
work, asbestos or lead paint
abatement, demolition ...
whenever dust protection is
needed.
1.After attaching jack to pole,
unlock plate on jack by sliding
pegs into large holes on head.
Remove plate from head.
2. Place plastic sheeting on
head. Use pegs on plate to
push plastic into large holes on
head. Lock by sliding pegs into
the small holes.
3. Unlock pole by turning inner
pole counter-clockwise.
4. With foot of pole on ground,
extend pole up so that the
plate is pressed against the
ceiling by spring action of the
jack. Turn pole extension
clockwise to lock it.
5. Check fit of plastic against
the ceiling. If it droops, loosen
extension pole and move to a
position that pulls the plastic
tight. Note: Entire wall must be
secured at top before securing
bottom.
6. Raise pole and pull plastic
sheeting under foot to make a
tight fit along the bottom of the
wall.
Goes up in less than 5 minutes.
One person can put up a 20foot long Zipwall dust barrier in
less than 5 minutes. Using the
telescoping, twist lock Zipwall
poles topped with the patented
Zipwall Jack, you simply
screen off your work area with
any plastic sheeting, canvas
tarp, dropcloth, etc.
Locks in place.
The Zipwall Jack locks the
screening material firmly
against the ceiling. The foot of
the pole keeps it snug against
the floor. It’s so simple to
install, you could put up four
walls around the job site in just
a few minutes. No special
training needed. The reusable
poles and jacks are made of the
most durable materials
available.
Pays for itself in 2 or 3 jobs!
For many contractors, ZipWall
will pay for itself in less than a
month. It even lets you take on
jobs you might have turned
down because of dust control
costs.
415-824-4300
35
MILLER DOWELS
Miller Dowels are available in a variety of woods and sizes. Miller Dowels...superior fasteners for solid wood joinery.
MINI X DOWEL AND BIT SET
Qty.
Includes
• MINI X Dowel - Dowel Length:
15⁄8” Cap Diameter: 1⁄4”. For
joining wood up to 3⁄4” in. thick.
Specie
Pcs
Code
Birch
100
668000
Specie
Pcs
Code
Birch
50
668500
Specie
Pcs
Code
Birch
50
669000
Size
Qty.
Code
MINI
1X
2X
EA
EA
• MINI X TruFit™ Bit - Shape and
size of TruFit™drill bit matches
dowl perfectly.
1X DOWEL AND BIT SET
Qty.
Includes
• 1X Dowel - Dowel Length: 23⁄4”
Cap Dia: 7⁄16” for joining wood up
to 11⁄8” thick.
• 1X TruFit™ Bit - Shape and size of
TruFit™drill bit matches dowl
perfectly.
EA
2X DOWEL AND BIT SET
Qty.
Includes
• 2X Dowel - Dowel Length: 31⁄2 ”
Cap Dia: 1⁄2 ”. For joining wood
up to 15⁄8” in. thick.
EA
• 2X TruFit™ Bit - Shape and size of
TruFit™drill bit matches dowl
perfectly.
™ DRILL BIT
TRUFIT™
DOWEL
EA
670000
670001
670002
Size
Specie
Qty.
Code
MINI
1⁄4” x 15⁄8”
Birch
Cherry
Oak
Walnut
100
100
100
100
668001
668002
668003
668004
1X
3⁄8” x 23⁄4”
Birch
Cherry
Oak
Walnut
Mahogany
Ipe
40
40
40
40
100
100
668501
668502
668503
668504
668505
668506
2X
Birch
Cherry
Oak
Walnut
Mahogany
Ipe
40
40
40
40
100
100
669001
669002
669003
669004
669005
669006
1⁄2 ”
36
EA
x 32⁄3”
415-824-4300
HARDWOOD DOWELS
Size
All items are made of top quality
maple or birch hardwood.
1⁄4”x4’
Qty
EA
3⁄8”x 4’
1⁄2”x 4’
5⁄8”x 4’
3⁄4”x 4’
1”x 4’
SIDE GRAIN BOAT
DECK PLUGS
Diameter
These Side grain plugs are straight
sided turned .005" to .008" oversize.
They are 3⁄8" long with a small
chamber on one end.
1⁄2”
3⁄8”
3⁄8”
1⁄2”
3⁄8”
Material
Qty
Teak
Teak
Mahogany
Mahogany
IPE
EA
EA
EA
EA
100 pcs.
Code
667420
667430
667440
667450
667460
667480
Code
667490
667491
667492
667493
667494
THE ZIPPER
Qty
Code
• Entrance & Exit Maker.
2 EA
ZIPPER
Size
Code
8’x 10’
9’x 12’
12’x 16’
16’x 20’
18’x 24’
20’x 30’
26’x 40’
ZTRP08
ZTRP09
ZTRP12
ZTRP16
ZTRP18
ZTRP20
ZTRP26
4 Mil (clear)
Code
4’x 50’
6’x 50’
10’x 50’
12’x 50’
20’x 50’
20’x 100’
91P405
91P605
91P105
91P125
91P205
91P210
6 Mil (black)
Code
10’x 50’
12’x 50’
20’x 50’
91Q105
91Q125
91Q205
• Create any width opening.
• Installs in seconds.
• Zips out dust, dirt, and heat loss.
BLUE POLY TARPS
Labeled heavy duty polyethylene
tarps are laminated on both sides
for maximum weather-proofing.
Cross weave fabric is designed for
maximum strength and durability.
Silver tarps are super heavy-duty
6MIL plastic. High strength, rustresistant grommets on each corner
and approximately every 3!. Lightweight, tear resistant, washable,
mildew proof, waterproof. Finished
size is slightly smaller than cut size.
PLASTIC SHEETING
P
POLY TRASH BAGS
Size
32”x 50”
415-824-4300
37
Qty
Code
15EA/ROLL
ZTRASH
BUILDING PAPER/HOUSE WRAP/FLASHING
30/30/30 RATAN ASPHALT
LAMINATED KRAFT
GRADE B PAPER
Size
Code
3’ x 500SQ/FT
91KRFT
Size
Code
Is an ideal asphalt laminated paper for a moisture barrier under
hardwood floors and for stucco backing in garages where interior
studding is exposed. Aquabar B is also used as a backing for
ceramic tile and stone veneering, as well as a good work-over and
masking paper for general utility purposes.
Moderate water vapor resistance. 16 hour water resistance. 2
sheets of Bs 30 kraft paper laminated with 30lbs per ream of high
melt point asphalt; low sulphur and virtually odor free. Meets
federal Spec. UU-B-790a, Type 1, Grade B, Style 1a, and UBC
Standard 17-1.
DOUBLE RATAN BLACKRAFT
ASPHALT SATURATED
KRAFT (SHEATHING)
40”x 250’
Two sheets of Blackraft in the same roll. Two layers go up
in one application. Water vapor permeable, water repellent.
26#/MSF Natural Kraft paper saturated with high quality,
low sulphur asphalt, virtually odorless. Meets Federal
Spec. UU-B-790a, Type 1, Grade D, Style 2 as required in
UBC Sec. 4706 (d) Exterior Lath, Weather-resistive
Barriers, Uniform Building Code and Uniform Building
Standard No. 17-1. 40" wide, 500 and 324SQ/FT per roll.
RATAN RED ROSIN
SIZED SHEATHING
Size
Inexpensive, non-staining, limited water resistance,
water vapor permeable. 36"x 500SQ/FT .010 thickness.
Cover sheet, deadening in floor structures, slip sheet
in built up roofs, floor protection, “drop cloth,” under
rigid foam in roof structures.
3’ x 500SQ/FT
INSULATION SUPPORT NETTING
• Supports Insulation.
• Ceilings
91KRFP
Code
91KRFR
Size
Code
4’x250’
90R425
Size
Code
• Kneewalls
• Under floors.
• Staple for permanent support.
• 1”x 2” mesh
PAPER BACK STUCCO NETTING
• Self-furring galvanized 17 Gauge
11/2” mesh stucco wire or
galvanized expanded metal lath.
37 / ” x 100’
1 2
91KRFW
• 15lb. felt moisture barrier lapped
to drain.
38
415-824-4300
CEDAR BREATHER
Size
• Allows for a continuous air space
between roof deck and shingles.
Code
200SQ/FT.
9115CB
• Eliminates excessive moisture.
• Reduces potential rotting and
warping.
• Allows entire underside of shingle
to dry.
ASPHALT SATURATED FELT PAPER
Size
Standard duty.
325SQ/FT
218SQ/FT
BACKER ROD
Description
15# Felt Paper ASTM Approved
30# Felt Paper ASTM Approved
Size
• Easy to install.
• Ideal for irregular joints.
• Economical
3⁄8”
5⁄8”
Surface Preparation: Clean joint of any
obstructions. All joint surfaces must be dry.
Code
x 20’
x 20’
9115RF
9130RF
Qty.
Code
EA
91BR03
91BR05
EA
Application: Select a PL Backer Rod size
approximately 25% larger that the joint
opening, to prevent sealant from passing on
either side. Push the Backer Rod into the joint
with a blunt tool or a finger, keeping uniform
depth. For best results, Backer Rod should be
installed at one-half the width of the joint, not
to exceed 1/2” depth or less than 1/4”.
Maximum joint size should be 3/16”.
HOME SLICKER
Home Slicker is the superior
solution for providing a rainscreen
for wall systems that is easily
applied and provides a continuous,
vertically channeled air and
drainage space along the entire
exterior wall. Home Slicker can
lower moisture levels in siding and
cladding systems, but is especially
effective for wood, fiber-cement,
EIFS, and brick. Home Slicker helps
to preserve the exterior cladding,
plywood, OSB, housewraps and
building papers, as well as paints
and stains.
415-824-4300
Size
Code
150SQ/FT
9115CS
Specifications
39
Width
39.37 in. (1 meter)
Length
46 1/2 ft.
Coverage
150SQ/FT ± 2SQ/FT
Height/Thickness
0.25 in.
Weight
7.2 lbs. per roll
7.0 oz./SQ/YD
Matrix Design
8 channels per 4 in.
(2 channels per in.)
Warranty
40 Year limited
SLICKER SCREEN
Size
Code
6”x 100”
9115CT
TYPAR HOUSEWRAP
Size
• Typar HouseWrap survives the rigors of
construction and won’t tear in the wind
or degrade in the sun.
9’x 100’
Code
900SQ/FT
91TYVK
• It’s easy to handle and cut. Convenient
stud markings show you where to nail
to speed installation.
• Glare resistant color.
• Unconditionally guaranteed to perform.
TYPAR TAPE
Size
For sealing joints on Typar.
17⁄8”x 165’
PAPER WINDOW FLASHING
• Every structure is susceptible to
dust, air and/or moisture.
• Regardless of whether the exterior is
• stucco
• wood
• brick
• or various siding materials,
the elements represent real potential
problems in damage and energy loss.
Code
91TYVT
Size
Code
6”x 300’
9”x 300’
91UF06
91UF09
POLYFLASH WINDOW FLASHING
Size
The polyethylene coating installed facing out
provides superior water resistance for the time
lapse before windows are installed and stucco
or siding is applied.
6”x 300’
9”x 300’
Code
91UFO4
91UFO5
Some window manufactures and construction
authorities favor the POLYFLASH product as
the paper back (next to the wood) has less
tendency to attract condensation.
TYPAR FLASHING
PEEL AND STICK
Size
• Butyl-based
6”x 75’
9”x 75’
• Compatible with Sikaflex
Code
91TYPS6
91TYPS9
• Ideal for straight jambs and heads of
windows and doors
40
415-824-4300
TYPAR FLASHING FLEX
Size
Works best for window sills and
around curved windows.
Code
6”x 75’
9”x 75’
91TYFL6
91TYFL9
ROLLED FURRING STRIPS
QTY
• Use to fur out-of-plumb rough
framing for a smooth drywall
installation.
EA
Size
1⁄16” x 2”
Code
9115FS
Pheonixboard Builder’s Shim Stock and Rolled Strip
Furring can be applied with staples or nails to fill in
low spots on wood framing or to provide additional
backing for casework and trim. Multiple layers of
progressively longer or shorter lengths can be
applied to achieve the desired built-up thickness.
Not intended for use in areas exposed to moisture.
• Use around windows for easier
trim installation.
• Creates a true plane for hanging
kitchen cabinets.
• Can be used in a variety of
vertical applications.
PROTECTO SEAL 45
Size
• Self adhering all purpose peel
and stick exposable aluminized
water proofing membrane.
2”x 50’
4”x 50’
6”x 50’
9”x 50’
12”x 50’
• SBS modified rubberized asphalt.
JIFFY SEAL WATERPROOF
MEMBRANE
Inert, inorganic, and will never rot,
decay, or be affected by bacteria or
fungus.
Code
91JA44
91JA45
91JA46
91JA49
91JA50
Size
Code
12”x 50’
30”x 50’
91JS12
91JS30
BUILDING TAPE 20
A new and superior self-adhering, air
and moisture barrier for vertical and
horizontal above grade substrates.
This 20mil polyethylene-backed SBS
modified rubberized asphalt
membrane can be applied to
• aluminum
• wood
• vinyl
• concrete and
• block surfaces
to form an air and
vapor barrier system.
415-824-4300
Size
Code
6”x100’
9”x100’
12”x75’
91BT20
91BT22
91BT25
• Since Building Tape 20 is a peel and stick self-adhering
membrane, there is no nailing or stapling required.
• You simply center the tape over the area to be sealed and
firmly press or roll the BT20 against the surface. Protecto-Wrap
also seals itself around nails and screws.
• Not only will it waterproof around doors and windows, it stops
air leakage, thus reducing heating and air conditioning costs to
the homeowner.
41
FLOOR PRODUCTS
JIFFY SEAL MEMBRANE
PRIMER #80
• #80 primer is an asphalt
base primer for use on all
horizontal applications above
40˚F.
Size
Qty
Code
1GAL
EA
91JS80
Size
Qty
Code
1GAL
EA
91JS90
• #100 primer is a high tack
SBS rubber base primer.
• It is used on all vertical
surfaces before application
of membrane and on all
surfaces with temperatures
between 25˚F and 40˚F.
42
415-824-4300
FLOOR PRODUCTS
®
FILM TECH SURFACE
PROTECTION FILM
Size
• Premium carpet protection.
Code
24”X200’
36”X200’
• Maintains a smooth walking
surface without lifting at the
edges.
91L2420
91L3620
• Keeps carpet clean and
looking “new.”
• Provides protection for up to
45 days.
Flooring
Surface Protection Film
PROTECTO-TAK SPRAY ADHESIVE
Size
Recommended for use with all
Protecto Wrap window flashing
tapes, sill sealing tapes,
waterproofing membranes and air
vapor barrier membranes.
16.25OZ spray
• Can be applied over concrete,
wood, OSB, vinyl, plywood,
metal, aluminum, polyethylene,
building wraps, Dens-Glass,
Dens-Glass Gold, block and
masonry surfaces.
• Excellent water resistance.
• Does not contain methylene
chloride or ozone depleting
chemicals.
• VOC compliment.
415-824-4300
43
Qty
EA
Code
91JS10
WOOD COATINGS/FINISHES/SEALERS
COPPERNATE “250”™
WOOD PRESERVATIVE
A heavy duty water-repellent wood
preservative.
Size
Code
1GAL
5GAL
93GRN1
93GRN5
Active Ingredients: *Copper
Naphthenate -20%, Petroleum Solvents 75%, Inert Ingredients -5%.
To prevent deterioration caused by
termites, powder post beetles, fungus,
rot, and decay. Controls warping and
swelling, and is paintable. Recommended for window frames, doors,
stairs, porches, posts, siding, shingles,
trellises, steps, subflooring, outdoor
furniture, fence pickets, fence rails,
furring strips arbors, flooring, and
beverage cases. Also for use on fence
posts, poles, foundations, sills, decks,
boats, and all wood exposed to moisture
or weather.
Coppernate 250™ can be used to treat
wood for greenhouses, i.e. nursery flats,
etc. In addition to preventing decay, blue
stain, and insect attack on wood. This
preservative controls warping, swelling,
shrinking, and end checking caused by
changes in moisture content of lumber
GREEN’S CLEAR
WOOD PRESERVATIVE
Use wherever wood meets water and
soil. Prevents deterioration caused by:
• Termites
• Rot
and plywood products. Powder post
beetles which invade furniture, flooring
and structural lumber are controlled by
application of this preservative. These
insects will not attack the treated wood.
Wood to be protected against
subterranean termites should be treated
before use in construction.
Estimate 150 to 200SQ/FT per gallon for
brush coat or 5 to 10 gallons per 1000
board feet for dipping dimensional
*Copper computed as
lumber.
elemental 2%
Size
Code
1GAL
93CLR1
Size
Code
• Fungus
• Decay
• Colorless, heavy duty, and water
repellent.
• Controls warping and swelling.
• Seals wood.
• Kills termites and wood eating insects.
COPPER-GREEN
WOOD PRESERVATIVE
®
In easy convenient spray cans.
Easy to use on pressure treated end
cuts. Great for contractors to carry
in carpenters’ pouch or tool box. No
messy brushes or rags to clean-up.
Spray can is powered by
compressed air. Product in a spray
pouch with no formula change.
13.5OZ spray
93GRN3
PENOFIN ULTRA PREMIUM
Size
• Transparent exterior finish
formulated to safe guard the
natural beauty of wood.
1GAL
Color
Transparent Cedar
Qty
EA
Code
93PNC1
• Resists stains and retards the
bleeding of nails.
• VOC compliant.
44
415-824-4300
STATION 1 ANTI-FLAME
FIRE RETARDANT WOOD
COATING #2075W
Revolution in home protection.
Los Angeles, CA - Culver City based
Station 1 Anti-Flame, Inc. has
introduced a new product which will
revolutionize home protection
against fire and termites. Developed
in Scandinavia as an anti-termite
solution. Station 1 Anti-Flame was
soon discovered to also prevent the
spread of fire. This dual purpose
preventative solution is
environmentally friendly, colorless,
and UL classified. Station 1 AntiFlame may be used on shake
shingle roofs, wooden decks,
building frames and exteriors, and
surrounding landscape.
Size
Code
5GAL
93FIR5
Size
Code
1GAL
93FLAM
contains specialized compounds which,
when heated to the appropriate
temperature, will activate and remove
the oxygen supply. Once the product
dries, the surface is resistant to flame.
Termites and other wood-destroying
insects can be eliminated by utilizing
Station 1 Anti-Flame on all types of
wood framing, wallboard and home
For wood applications, Station 1
exteriors. Insects are repelled when they
Anti-Flame is applied with a
come in contact with the anti-termite
specially pressured spray gun which liquid. Station 1 Anti-Flame is guaranteed
allows the compound to impregnate to prevent termites for up to ten years.
the wood. Station 1 Anti-Flame
FLAMESTOP - II
FIRE RETARDANT FOR
OUTDOOR APPLICATIONS
Ideal for architectural projects.
• Specially formulated for outdoor
application such as cedar shake
roofs, shingles, siding, and any
exterior wood product. Useful for
various types of fabrics such as
awnings, canvas, costmes, gyproc
paper, thatching, stage props, hay
barriers, welders clothing, and
other porous cellulotic material.
• Weatherproofs the treated
material, as well makes gyproc
paper repel water. Tends to bring
out the natral beauty of the wood
surface.
• Meets NFPA 255, NFPA 701,
UL723, and UBC 42-1 Standards
and passed ASTM-E84 testing. It
is a Class A rating with a Flame
Spread 25, with one to two
applications depending on the
moisture content of wood.
• Exterior products will maintain their
applied integrity and flame retardant
effectiveness for an average of 5 years;
in some cases, a minimum of 10 years.
• Contains polymers and surfactants that
allow it not only to penetrate a wood
surface, but also creates a weather-tight
adhesion bond.
• Has additives that seal in the fire
• White in appearance but dries clear,
retarding chemicals.
easy to apply, water-based, non•
Drying time is 24 hours.
toxic, non-carcinogenic and is
applied with sprayer, roller, or brush. • Also a wood preservative.
415-824-4300
45
WOLMANIZE® END CUT
A brush on preservative especially
formulated for end coating of
freshly sawn ends of pressure
treated “outdoor” wood.
CABOT® CLEAR SOLUTION
TRANSLUCENT TONES
Introducing five, wood-inspired
translucent tones that enhance the
natural beauty of all exterior wood
surfaces. Protects against UV and
water damage and resists mildew.
Made for the purist. For use on
siding, decks and shingles.
Size
Code
1GAL
1QT
93ECSI
93ECSQ
Size
Color
Qty.
Code
1GAL
Clear Solution
Cedar Translucent
Weathered Gray
Heartwood
Pacific Heartwood
Clear Solution
Pacific Heartwood
EA
93C9100
93C9102
93C9103
93C9104
93C9105
93C9100
93C9105
Size
Color
Qty.
Code
1GAL
Clear
Cedar
Redwood
EA
93C3060
93C3062
93C3065
5GAL
CABOT® WATER BASED
CLEAR SOLUTION
Water-based Clear Solution is for
use on new or reconditioned wood
only, including siding, shingles,
shakes, decks, fences, roofs, and
log homes. Water-based Clear
Solution provides outstanding
results on all natural wood species
such as cedar, redwood, fir, pine,
and cypress, including pressuretreated wood, plywood and texture
1-11.
CABOT® WATER PROOFING
WITH TEFLON
Size
Qty.
Code
• Advanced technology for
advanced results.
1GAL
5GAL
EA
93C1000
93C1000
• Unique silicone emulsion
EA
• Water based
• VOC free
• For wood: penetrates into pores,
last longer than wax and
excellent for decks.
• For brick: seals the surface and
is simple to apply.
• For concrete: reduces efflorence
and protects against freeze/thaw
cycles.
46
415-824-4300
CABOT® PROBLEM-SOLVER
WOOD CLEANER,
BRIGHTENER & STRIPPER
Cleaner
The cleaner removes mildew, mold,
algae and dirt. The brightener
removes tannin bleed and metal
rust stains. It restores that rich
“new wood” look. The stripper
removes oil-based finishes from
wood surfaces.
Brightener
1GAL
1GAL
Stripper
1GAL
CABOT® PROBLEM SOLVER
PRIMER
Provides superior resistance to
tannin bleed, mildew and moisture.
Ideal base coat for Cabot O.V.T®.
Solid Color Stains or Cabot Finish.
The secret to enduring beauty. (In
oil and 100% acrylic formulations.)
415-824-4300
Qty.
Code
EA
93C8003
Qty
Code
EA
93C8004
Code
1GAL
White Oil Primer
White Acrylic Primer
EA
93C8311
93C8022
PLEASE ASK FOR OUR COLOR CARD.
Style
1800 Series
47
93C8002
Qty
7400 Series
State-of-the-art coating for all wood
decking, outdoor furniture and
fencing, cement patios and
walkways. Long lasting, water
repellent, mildew resistant. Resists
scuffing and erosion, and has unsurpassed washability. Protect now.
Enjoy the beauty of outdoor living.
EA
Color
Style
CABOT® SOLID COLOR
DECKING STAIN WITH
TEFLON® SURFACE
PROTECTOR
Code
Size
CABOT® DECKING STAINS
Add beauty. Add years. Deeppenetrating alkyd resin base
provides a tough, scuff-resistant
finish and longer-lasting protection.
Water repellent and mildew
resistant. Extend the life of your
deck. For use on decks, fences,
patio furniture, steps and railings.
30 colors.
Qty.
CABOT® OVT SOLID COLOR
ACRYLIC STAINS IN
UNLIMITED CUSTOM
COLORS
Size
0600 Series
Our computer can match any color
sample! 100% Acrylic formulation
provides beautiful coverage like
paint, but performs and protects like
no other stain. 12-year guarantee to
not crack, blister or peel when
applied to new wood. Water
repellent, mildew resistant. The
most beautiful results on earth.
CABOT® SEMI-TRANSPARENT
STAINS
Enhances natural wood grain by
blending deep-penetrating oil with
delicate pigments. Water repellent
and mildew resistant. It won’t
crack, blister or peel. To wood, it’s
the fountain of youth.
Size
Series
1GAL
6300
Code
CABOT® SEMI-SOLID STAINS
One coat does the job of two semitransparent coats. A uniquely
formulated, richly colored oil-based
stain that provides longer-lasting
protection. For a very smart look.
Size
Color
Qty
Code
1GAL
1GAL
1GAL
1GAL
1GAL
1GAL
1GAL
1GAL
1GAL
White
New Cedar
New Redwood
Sequoia
Red Cedar
Drift Gray
Dune Gray
Redwood
Desert Sand
EA
93C6101
93C6116
93C6117
93C6125
93C6133
93C6144
93C6167
93C6180
93C6192
OTHER COLORS AVAILABLE
CABOT® OVT SOLID COLOR
OIL STAINS
Size
Provides beautiful coverage like
paint, but performs and protects like
no other stain. Resists cracking,
peeling and blistering. Water
repellent and mildew resistant. Hide
the years.
6500 Series
48
415-824-4300
CABOT® BLEACHING OIL™
Accelerates the natural weathering
process and turns uncoated exterior
wood to a beautiful consistent
driftwood gray color in months.
Go gray without aging.
Size
Qty.
Code
1GAL
EA
93C6241
CABOT® AUSTRALIAN TIMBER OIL
For hardwood decks and
outdoor furniture.
• Retains depth of color.
• Keeps wood structure intact.
• No flaking or peeling.
• No grain erosion.
• No graying.
Size
Color
Code
1GAL
1GAL
1GAL
1GAL
Amber
Honey
Flame
Natural
93C9457
93C9458
93C9459
93C9400
CABOT® FINISH
Style
Finally there’s a finish that is as
durable as it is a 100% acrylic,
low-luster finish for application
to virtually any new or previously
painted surface—with minimal
surface prep. 15-year guarantee on
new wood. For use on exterior trim
and siding, including wood, primed
metal and stucco. 67 colors.
1700 Series
WOLMANS® PUMP SPRAYER
Size
Fast, easy way to apply cleaners,
preservatives and many semitransparent stains. Features a
mineral spirit-resistant hose,
translucent poly so user can see
liquid level, exclusive Pic-A-Pattern™
dual nozzle system with two fan
pattern nozzles—different nozzle
flow rates accommodate the widest
range of materials and make sprayer
more versatile.
415-824-4300
11/2 GAL
49
Qty
EA
Code
ZPUMP
SIKKENS CETOL® SRD CALIFORNIA
An easy-to-use, translucent, waterrepellent, exterior stain wooden siding,
roofs, decks, railings, and deck furniture.
Its alkyd resin stabilizes the wood grain
and builds a durable UV resistant barrier.
The Cetol SRD California protective
barrier permits the wood to breathe and
accommodates seasonal shifts in
temperature without losing adhesion to
the wood surface.
Size
Color
Qty
Code
1GAL
1GAL
1GAL
1GAL
1GAL
1GAL
Natural Oak
California Redwood
Natural
Teak
Red Wood
Natural Light
EA
93S0051
93S0541
93S0781
93S0851
93S0891
93S0961
EA
EA
EA
EA
EA
Horizontal Surfaces
Vertical Surfaces
• One coat of Cetol SRD California, which produces a matte finish, may
be used on decks (including hardwood decks) and docks.
• One coat of Cetol SRD California, which produces a matte finish, is
suitable for siding, fences, roof shakes, shingle, and garden furniture.
• Three coats of Cetol SRD California, which produces a satin finish, is
recommended only for hardwoods used in decks, railings and deck
furniture.
• Three coats of Cetol SRD California, which produces a long-lasting,
satin finish, is suitable for siding, doors, windows, fences, and
garden furniture.
SIKKENS CETOL® INTERIOR STAIN
Cetol Interior Stain is a full-bodied
waterborne wiping stain in a wide
variety of natural shades and
decorative colors that feature finely
ground pigments for unsurpassed color
clarity and rich, uniform staining results.
Nothing adds a feeling of warmth and
quality to your home’s interior quite like
fine wood. Whether it’s new oak
paneling, old hardwood rich with patina
of age or refinished furniture whose
natural splendor had been hidden
beneath layers of paint–fine wood adds
the look of elegance and luxury to your
home. It takes special care to reveal
the true beauty of wood. Sikkens
custom line of interior wood care
products will enhance and protect that
beauty from the ravages of time.
Size
Color
Qty
Code
1QT
1QT
1QT
1QT
1QT
1QT
1QT
1QT
1QT
1QT
1QT
Natural Oak
Walnut
Burgundy
Opal White
Cherry
Mahogany
Hunter Green
Butter Nut
Ipswich Pine
Natural
Teak
EA
93S804
93S810
93S823
93S830
93S844
93S845
93S861
93S872
93S874
93S878
93S885
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
Cetol Interior Stain Advantages:
• Finely ground pigments provide exceptional color clarity and uniform staining results.
• Excellent workability—wipes on without splattering, drips, or brush marks.
• Dries quickly and cleans up easily.
Cetol Interior Stain Can Be Used On:
• Cabinets and Furniture • Bathroom Woodwork • Kitchen Woodwork
• Doors
• Trim and Baseboards • Stairs and Banisters
• Window Frames
®
SIKKENS CETOL INTERIOR CLEAR
A solventborne transparent coating
that gives a durable finish to all interior
woodwork, it enhances the natural
beauty of the wood grain with a hardwearing and scratch-resistant topcoat.
Cetol Interior is available in 2 gloss
levels—Low Luster and Satin.
50
Size
Gloss Level
Qty
Code
1QT
Satin
EA
93S7700
415-824-4300
SIKKENS CETOL® BL INTERIOR CLEAR
A clear waterborne coating for a durable
finish on all interior woodwork. It
enhances the natural beauty of the wood
grain with a durable-wearing and scratchresistant finish. A quick-drying, low odor
formulation that provides easy clean up,
Cetol BL is available in 3 gloss levels—
Low Luster, Satin, and Gloss
Size
Finish
Qty
Code
1QT
1QT
1QT
Low Luster
Satin
Gloss
EA
93S7400
93S7500
93S7600
EA
EA
Type: Transparent
Sheen: Low-luster, satin, gloss
Description: Waterborne transparent finish for interior woodwork.
Usage: Doors, trim, molding, windows, cabinets, ceilings, walls, logs,
furniture, etc.
Features: Water-clear finish, quick drying, washable, non-yellowing
Technology: Acrylic urethane
SIKKENS CETOL® UV INTERIOR
A waterborne formula for interior
woods where a clear matte finish is
desired. Ideally suited for light colored
wood surfaces such as pine, it
contains a special UV inhibitor to
retard the yellowing effects of
ultraviolet rays. Resistant to daily
wear-and-tear and can be applied on
log walls and in saunas. For use on
bare wood only.
Size
Qty
Code
1QT
1GAL
EA
EA
93S7100
93S7200
Type: Transparent
Sheen: Matte
Description: Waterborne transparent finish for interior woodwork
made for light-colored woods or when a matte finish is desired.
Usage: Ceilings, walls, logs, saunas
Features: Non-yellowing, washable, quick, drying
Technology: Acrylic
SIKKENS CETOL®
MARINE SATIN FINISH
Size
Qty
Code
Description:
1QT
EA
93S7800
Size
Qty
Code
1QT
1GAL
EA
EA
93S8200
93S8201
• Enhances and protects the natural
beauty of interior and exterior wood.
• Semi-transparent finish, prevents
weathering and repels water.
• Easy to use, just wash wood
thoroughly and apply.
• Three coats are recommended for the
first application.
• Follow with annual touch-ups.
SIKKENS CETOL® WOOD CONDITIONER
Cetol Wood Conditioner provides a
beautiful finish in a waterborne formula
that pre-conditions and seals wood,
while ensuring a more uniform finish
on large areas such as walls, doors,
and floors.
Usage
Doors, trims, moldings, windows, cabinets, walls, furniture,
banisters, stairs, etc.
Type: Special usage
Features
Quick drying, minimizes blotching of stain application.
Sheen: No sheen
Description
Waterborne conditioner for softwoods
that allows for a more even application of Cetol Interior Stain.
415-824-4300
Technology: Waterborne
51
PERMA-WHITE/MILDEW-PROOF
INTERIOR WALL & TRIM PAINT
Size
1GAL
93W2711
Best interior latex paint for mildew-prone areas
• GUARANTEED mildew-proof for 5 years.
• Available in Satin & Semi-Gloss Finishes.
• Self-Priming, high-adhesion formula —bonds to glossy surfaces
without sanding, unlike other paints.
• Dries fast, recoat in just 2 hours.
• Easy to apply with brush, roller or sprayer.
• May be tinted to any pastel or medium shade.
• Great for bathrooms, kitchens, laundry rooms, closets, and
basements—any area that is susceptible to mildew growth.
• Cleans up easily with soap and water.
Although PERMA-WHITE is formulated for the
special conditions in bathrooms, it is also ideal for
kitchens, basements, closets, laundry rooms, hot
tub rooms, locker rooms. PERMA-WHITE is
recommended for these high-use areas in schools,
hospitals, hotels, nursing homes, and restaurants.
Walls and ceilings - recommended for new and previously
painted drywall, plaster, paneling, and ceramic tile. May be applied directly to
non-porous wallcovering. Scrubbable, stain-resistant finish.
Trim, doors, cabinets, woodwork - Self-priming, high-adhesion formula
is excellent for new and previously painted doors and trim. Bonds tightly to glossy
enamels and varnishes, ensuring a professional-looking paint job.
HIGH HIDE COVER STAIN®
PRIMER SEALER/BOND COAT
High Hide Cover Stain is a high-performance, allsurface o i l - b a s e primer-sealer that offers
outstanding adhesion and stain killing power and
dries to recoat in 2 hours. High Hide Cover Stain
may be tinted toward the color of the finish coat
to help the topcoat hide in one coat.
High Hide Cover Stain offers excellent flexibility
and penetration making it ideal for exterior
application to wood siding and trim. It seals
surfaces with one coat offering excellent
hold-out for enamels of any sheen.
Code
Size
Code
1GAL
93PRM3
Uses - For interior and exterior walls, ceilings, doors, trim, paneling,
siding, window frames and shutters - any surface where a highhiding, high-adhesion primer is desired. This all-surface low-VOC
primer-sealer can be used over or under any oil or latex architectural
paint and is ideal for water damage, fire damage and smoke
damaged (including nicotine) surfaces. Meets stringent SCAQMD Air
Quality Standards for Specialty Primers, Sealers and Undercoaters.
• Interior and exterior
• Sticks to all surfaces without sanding
• Use for fire, smoke & water damage
BULLS EYE 1-2-3®/PRIMER-SEALER
STAIN-KILLER/BOND COAT
Interior - Recommended for priming interior wall and ceiling.
Seals porous drywall, plaster, wood and flat paint so finish
coat goes on smooth and dries evenly. Great for trim, doors,
woodwork, cabinets, etc. Stick to glossy enamels and other
hard to paint surfaces without sanding or deglossing.
• Blocks cedar & redwood bleed
• Fast drying - recoat in 2 hours
Size
Code
1GAL
93PRM2
Blocking Stains - Blocks stains caused by marker, ball-point pen,
crayon, lipstick, graffiti, grease and oil, etc.
Exterior - Top rated w a t e r- b a s e d p r i m e r f o r
exterior siding including wood, masonry, vinyl and
aluminum siding, as well as fascia, soffets, trim,
windows, shutters, and doors.
Tinting - For better topcoat coverage, tint primer to approximate
color of topcoat paint by adding up to 2 oz. universal colorant per
gallon. For dark color priming use Bulls Eye 1-2-3 DEEP TINT, which
can be tinted to darker colors by adding up to 6 oz. of colorant
per gallon.
Wallcovering - Bulls Eye1-2-3 also provides an excellent surface for most
types of wallpaper. If future strip ability is desired, use SHIELDZ® Universal
Pre-Wallcovering Primer & Sealer
Topcoat Finishes - Finish with oil-base architectural topcoat paint.
B-I-N® PRIMER-SEALER
STAIN-KILLER/BOND COAT
B-I-N adheres tenaciously to all dense, smooth
and slick surfaces such as: dense hardboard,
chipboard, glass, Formica® , ceramic tile, PVC
& metal pipes, radiators, grillwork, fire doors,
and galvanized ductwork. No sanding, etching or
deglossing agents are needed to get a firm
bond. B-I-N provides an "anchor" for the top coat
so it can't be chipped or scraped off easily.
Size
Code
1GAL
93W0901
•
•
•
•
•
•
52
Absolutely the best interior wood sealer.
Seals knots and sap streaks inside and out.
Seals pet, smoke and musty odors.
Seals water, smoke, graffiti and grease stains.
Sticks to all surfaces without sanding.
Lightening fast dry - recoat in 45 minutes.
415-824-4300
MARKING PAINT
Size
• Use these inverted marking
paints to deliver professional
applications in construction,
survey, athletic fields, and
location identification.
17oz
17oz
17oz
17oz
Color
Florescent Orange
Florescent Green
Florescent Yellow
Red/Orange
Code
93PS222
93PS224
93PS226
93PS230
• Safe on turf grass and fields
of play.
ZINSSER SPRAY PRIMER
• Covers stains.
Size
Color
Code
• Primer sealer.
13oz
Flat White
93PRM4
• Stain killing bondcoat.
• Dries in 30 minutes.
PAINT THINNER
• Clean air solvent.
Size
Code
• General purpose thinner.
1GAL
1QT
93PTIG
93PTIQ
• 100% mineral spirits.
• VOC content 6.5 lbs/gal.
LITE-N-UP WOOD BLEACH
WOOD KOTE
• Used to lighten the natural color
of wood.
• Easy to use, one step two part kit.
• Self neutralizes, requires no rinsing.
415-824-4300
53
Size
Code
1QT
93W0083
JEL’D POLY-KOTE/WOOD KOTE
• Just wipe it on.
Size
Code
• Use on interior wood surfaces.
1QT
93W2160
• Apply with a soft cloth.
• No steel wool or sanding
between coats.
• No drips, runs, spills, or mess.
• Satin finish.
JEL’D STAINS/ WOOD KOTE
• The original jelled wood stain.
• Premium quality interior stain.
• Perfect for doors, floors, cabinets,
railings, moldings, and crafts.
FORSITE MOLD & MILDEW
RESISTANCE COATING
• Available in clear or blue pigment to
monitor coverage area.
• High coverage - up to 1600 sf./gal.
• 10 year limited warranty.
• EPA/FDA compliant silver additive.
Size
Color
Code
1QT
1QT
1QT
1QT
1QT
1QT
1QT
1QT
1QT
1QT
1QT
Light Oak
Brown Mahogany
Butter Nut
Cherry
Fruitwood
Golden Oak
Red Mahogany
Black
Walnut
White
Gray
93W2013
93W2023
93W2033
93W2043
93W2063
93W2073
93W2093
93W2113
93W2133
93W2143
93W2153
Size
Color
Code
1GAL
5GAL
SPRAY
1GAL
5GAL
Clear
Clear
Clear
Blue
Blue
93E4000
93E4001
93E4002
93E4500
93E4501
ForSite is formulated as an easy to use permament coating that provides
long-term, residual protection against water intrusion, excessive moisture
and mold and mildew growth on its surface. ForSite is ideal for new
construction, remodeling or repair projects to prevent future mold growth
on its surface as well as to protect porous and semi-porous construction
surfaces from moisture damage. It can also be used in building
remediation to restore the integrity of aged or water damaged materials.
• Water based formula.
• Use any sprayer, roller or brush.
• Dries quickly within an hour.
MOLDEX MOLD INHIBITOR
Size
Multi-purpose household cleaner designed as an
industrial cleaner for water damage restoration.
Moldex is also approved for use as a hospital grade
disinfectant and has been specifically formulated as
a fungicide and mildewstat. Moldex is based on a
proven quaternary ammonium blend and packaged
in a ready to use form.
1QT PUMP SPRAY
1GAL
Code
93E5000
93E5001
• No bleach or rinse.
• Unscented.
• Can be painted over.
54
415-824-4300
URETHANE CLEAR FINISH
• Maple counter top refinisher.
• Fast drying, clear synthetic oil.
• Moisture and alcohol resistant.
SUPER DI-ALL
MILDEW SOLUTION
Just add Super Di-All to your paints
for fast, easy mildew protection. A
liquid mildewcide, not a paste. It
doesn’t change color, gloss or
durability. For use with all types of
paint. 1OZ per gallon.
Size
Qty
Code
16OZ
EA
6FMCLR
Size
Qty
Code
1OZ
EA
93C1600
Size
Qty
Code
1GAL
5GAL
EA
93FSE1
93FSE5
Size
Qty
Code
1QT
1GAL
EA
EA
93DEFTQ
93DEFTG
SEASONITE™
Stabilizes and protects pressuretreated wood from weathering.
Ideal for new, pressure-treated
decks and patio lumber. Can be
applied before or after lumber is
installed. Provides a slow, steady
seasoning process to reduce
warping, cupping and swelling.
Provides a sound surface for
painting, staining or finishing.
Produces a film that resists mildew.
Economical and easy to apply with
brush, roller or sprayer.
DEFTOIL® MARINE
TEAKWOOD FINISH
Protects exterior woods above the
waterline from the effects of rain
and sun. Hardens in the wood, not
on the wood. Penetrates deep into
wood pores to create the rich,
warm glow of a hand-rubbed finish.
Can’t chip, peel or wear away. For
use on bare teak, mahogany, and
other exotic woods.
415-824-4300
55
BUILDER’S HARDWARE
CORNER IRONS
Inside corner braces, zinc plated
steel, bulk pack without screws.
• Reinforces right angle corner joints.
• Screw holes are staggered in
5" and larger.
FLAT CORNER IRONS
Flat corner braces, zinc plated steel,
bulk pack without screws.
• For use to reinforce flat surface
right angle corner joints.
• Ideal for box, chest and furniture
construction or repair.
“T” PLATES
Zinc plated steel, bulk pack without
screws.
Size
Width
Qty
11⁄2"
2"
21⁄2"
3"
31⁄2"
4"
5"
6"
8"
1⁄2"
EA
1"
11⁄8"
11⁄8"
Size
Width
Qty
11⁄2"
2"
21⁄2"
3"
31⁄2"
4"
5"
6"
8"
3⁄8"
EA
7⁄8"
11⁄2"
Size
Width
Qty
5⁄8"
EA
3"x3"
4"x4"
• For use to reinforce flat surface
joints, seams and cracks.
• Ideal for box, chest and furniture
construction or repair.
SHELF BRACKET
Size
• Utility shelf bracket can be used as
a support or brace.
• Strengths exceed ANSI/BHMA
standards.
• Brackets are designed for use with
standard dimensional lumber.
5"x6"
6"x8"
8"x10"
10"x12"
12"x14"
SASH LOCK
• Sash lock and strike for double
hung windows.
5⁄7"
5⁄8"
3⁄4"
3⁄4"
7⁄8"
3⁄8"
1⁄2"
1⁄2"
1⁄2"
3⁄4"
7⁄8"
3⁄4"
Code
9ZCI14
9ZCI20
9ZCI24
9ZCI30
9ZCI34
9ZCI40
9ZCI50
9ZCI60
9ZCI80
Code
9ZFI14
9ZFI20
9ZFI24
9ZFI30
9ZFI34
9ZFI40
9ZFI50
9ZFI60
9ZFI80
Code
9ZTP33
9ZTP44
Qty
Code
EA
9ZWT56
9ZWT68
9ZWT81
9ZWT90
9ZWT99
Qty
Code
EA
ZA1500
• Secures windows and
reduces rattling.
• Aluminum die cast US3 bright
brass with wood screws.
SASH CORD
Size
• Manufactured with fine
cotton construction.
1⁄4"x50’
1⁄4"x100’
56
Code
ZA1505
ZA1506
415-824-4300
GATE HARDWARE
HOUSE NUMBERS
Description
• Full 4" house numbers; rust proof
bright brass US3 finish with
fastening pins.
Code
0
1
2
3
4
5
6,9
7
8
ZNBRAS0
ZNBRAS1
ZNBRAS2
ZNBRAS3
ZNBRAS4
ZNBRAS5
ZNBRAS6,9
ZNBRAS7
ZNBRAS8
HOUSE NUMBERS
Description
• Full 4" house numbers; rust proof
US10 black finish with fastening
pins.
Code
0
1
2
3
4
5
6,9
7
8
ZNBLAK0
ZNBLAK1
ZNBLAK2
ZNBLAK3
ZNBLAK4
ZNBLAK5
ZNBLAK6,9
ZNBLAK7
ZNBLAK8
PLUMBERS TAPE
Size
• 10’ coil nail/bolt type galvanized
hanger strap.
Code
/ ”x10’
9ZPT61
3 4
• 20 gauge
• 1/4” diameter holes on 7/8”
centers.
CONTINUOUS HINGES
• Medium Gauge Construction
Size
Finish
Code
• For use on lids, table leaves and
cabinet doors.
11/16”x48’
Nickel
Brass
Nickel
Brass
Nickel
Brass
Nickel
Brass
ZA1600
ZA1605
ZA1610
ZA1615
ZA1620
ZA1625
ZA1630
ZA1635
11/2”x48’
11/16”x72’
11/2”x72’
415-824-4300
57
GATE HARDWARE
SAFETY HINGE HASPS
Zinc plated.
Size
Code
31⁄2"
41⁄2"
6"
ZA1403
ZA1404
ZA1406
ORNAMENTAL DOOR PULL
Size
• Adds the finishing touch to gates
and doors.
• Durable black finish, heavy gauge
steel insures long weathering
service.
Qty
Code
1 PAIR/PKG
ZA1940
• With screws:
10 3⁄8" pull length
61⁄2" grip length
DOOR PULLS
• Ideal for use on screens, cabinets,
sheds, and barn doors.
• Comfort and appearance is
enhanced by rounded contour
edges.
Size
Qty
Code
5"
53⁄4"
61⁄2"
77⁄8"
EA
ZA1943
ZA1944
ZA1945
ZA1946
• Packaged with screws.
• Zinc finish.
BARREL BOLTS
Zinc plated.
58
Size
Code
21⁄2"
3"
4"
ZA1420
ZA1430
ZA1440
415-824-4300
GATE HARDWARE
BOLT, HOOK, AND
STRAP HINGE
Square holes permit use of
carriage bolts or machine bolts.
All sizes take 5⁄16" bolt.
Size
Code
6"
8"
10"
ZA1706
ZA1708
ZA1710
Size
Code
HEAVY STRAP HINGES
Zinc plated.
5"
6"
8"
ZA1800
ZA1805
ZA1810
DECORATIVE T
Size
Code
7"
ZA1715
BUTT HINGES
Square corner.
415-824-4300
59
Size
Qty
Code
31⁄2"
4"
PAIR
ZA1815
ZA1820
PAIR
GATE HARDWARE
BUTT HINGES
Galvanized with brass pin.
Size
Qty
Code
31⁄2"
4"
PAIR
ZA1825
ZA1830
PAIR
T HINGES
Zinc plated.
Size
Heavy ”T” hinges.
5"
6"
8"
MERX QUICK GATE™ HINGE
• A 1 piece 36” hinge constructed
of a pre-drilled arm of flat steel
and a pre-drilled 4” x 4” post
clamp that never allows the gate
to sag.
Code
ZA1900
ZA1905
ZA1910
Size
Qty
Code
36”
EA
9SHINGE
• Pre-drilled holes for quick and easy
installation with any type or size of
planks or framing materials.
• Gates can be built with minimal or
no framing.
• Saves time by simplifying
construction.
• Replaces conventional hinges.
• Compare the alternates for cost,
construction time and end product
quality.
GATE LATCHES
Style
Zinc plated.
Straight
Offset
Ring Type
Code
ZA1915
ZA1920
ZA1925
GATE FIXER
Code
• Fixes sagging gates.
ZA1930
• Braces, turnbucles, cable
clamps, cable, and nails
(included).
60
415-824-4300
GATE HARDWARE
GATEMATE TEE HINGES
GATEMATE FLEUR
DE LEYS HINGES
Size
Finish
Qty
Code
6"
9"
12"
dull black
dull black
dull black
PAIR
PAIR
Z550150
Z550225
Z550300
Size
Finish
Qty
Code
12"
dull black
PAIR
Z551300
Size
Finish
Qty
Code
dull black
PAIR
Z552705
Finish
Qty
Code
dull black
PAIR
Z553100
Size
Finish
Qty
Code
11"
dull black
PAIR
Z554275
Size
Finish
Qty
Code
12"
18"
24"
dull black
dull black
dull black
PAIR
PAIR
Z563300
Z563450
Z563600
Size
Finish
Qty
Code
dull black
PAIR
Z555150
Finish
Qty
Code
dull black
PAIR
Z556175
PAIR
GATEMATE BUTTERFLY HINGES
23⁄4" x 2"
GATEMATE UNEQUAL HINGE
Size
4" x 3"
GATEMATE HINGE
FRONTS ONLY F.D.I.
GATEMATE HOOK
& BAND HINGES
GATEMATE LEVER
LOCK HANDLE
6" x 2"
GATEMATE LEVER
LOCK HANDLE F.D.L.
Size
7" x 2"
415-824-4300
61
PAIR
GATE HARDWARE
GATEMATE STRAIGHT
DOOR BOLTS
Size
Finish
Qty
Code
dull black
EA
Z557150
Finish
Qty
Code
dull black
EA
Z560100
Finish
Qty
Code
Epoxy Black
EA
Z523002
Size
Finish
Qty
Code
21⁄2"
Satin
EA
Z149002
Size
Finish
Qty
Code
Epoxy Black
EA
Z514100
Finish
Qty
Code
Epoxy Black
Epoxy Black
EA
Z512100
Z512150
6"
GATEMATE DOOR HANDLE F.D.L.
Size
4"
GATEMATE SUFFOLK LATCHES
Size
Heavy
LOCKS
• Mortis Sash Lock-3 lever(B)
GATEMATE OVAL PADBOLTS
4"
GATEMATE BRENTON PADBOLTS
Size
4" x
6" x 1⁄2"
1⁄2"
62
EA
415-824-4300
GATE HARDWARE
HDG TEE HINGES
HDG HEAVY TEE HINGES
HDG OFF SET HINGE
HDG ADJUSTABLE BAND
AND HOOK
HDG HEAVY
REVERSIBLE HINGE
HDG CRANKED BAND
AND HOOK
HDG WINDSOR
LATCH (HEAVY)
Size
Qty
Code
4"
6"
8"
PAIR
PAIR
H004100
H004150
H004200
Size
Qty
Code
12"
18"
PAIR
PAIR
H503300
H503450
Size
Qty
Code
31⁄2"
EA
H602001
Size
Qty
Code
14"
18"
PAIR
PAIR
H508350
H508450
Size
Qty
Code
10"
12"
PAIR
PAIR
H509250
H509300
Size
Qty
Code
10"
12"
18"
PAIR
PAIR
H507250
H507300
H507450
Size
Qty
Code
EA
H123003
Heavy
415-824-4300
63
PAIR
PAIR
GATE HARDWARE
HDG SUFFOLK LATCH
Size
Heavy
Qty
Code
EA
H523002
HDG TWISTED RING LATCH
Size
Qty
Code
6"
8"
SET
SET
H524150
H5612001
Size
Qty
Code
31⁄2"
4"
EA
EA
H52415A
H56120A
Size
Qty
Code
6”
SET
H525150
Size
Qty
Code
31⁄2"
EA
H52515A
Size
Qty
Code
EA
H532150
H532200
HDG TWISTED RING (ONLY)
HDG PLAIN RING LATCH
HDG PLAIN RING (ONLY)
HDG CABIN HOOK WIRE PATTERN
6"
8"
64
EA
415-824-4300
GATE HARDWARE
HDG SLIDE BOLT
Size
Qty
Code
EA
H602002
Qty
Code
EA
EA
H521001
H521002
Qty
Code
EA
H514100
Qty
Code
EA
H601001
Size
Qty
Code
6”
81⁄2”
EA
EA
H512150
H512201
Size
Qty
Code
EA
H537150
6"
HDG AUTO CATCH
Size
Medium
Large
HDG OVAL PAD BOLT
Size
4”
HDG AUTO LATCH
Size
2”
HDG BRENTON BOLT
HDG DOOR/GATE HANDLE
6”
415-824-4300
65
GATE HARDWARE
HDG FLAT HEAD WOOD SCREWS
Size
Qty
Code
EA
H435008
H435021
H435032
H435044
H435050
Qty
Code
EA
EA
H510100
H510150
Qty
Code
EA
H535200
Size
Qty
Code
12"
EA
H520300
Size
Qty
Code
12"
EA
H602004
6" x 1"
8" x 1"
10" x 11⁄2"
12" x 2"
14" x 21⁄2"
HDG TOWER BOLT
Size
4"
6"
HDG HEAVY HASP
Size
8"
HDG GARAGE DOOR BOLT
HDG CANE BOLT
66
415-824-4300
DOOR HARDWARE
PAD LOCKS
MASTER LOCKS
Size
Width
Code
11/2”
2”
ZA1401
ZA1400
Qty
Code
EA
ZA1502
Qty
Code
PAIR
ZA1502A
• Economy spring door stop.
Qty
Code
• US3 bright brass finish with
screws.
PAIR
ZA1502B
Qty
Code
EA
ZA1502C
• Double locking levers.
3D 9/32" Shackle
5D 3/8" Shackle
• High tech steel shackle.
• Reinforced laminate steel body.
FLOOR DOOR STOP
• Floor mounted door stop helps
prevent damage to walls.
screws.
• 1/2” overall height.
SOLID DOOR STOP
• Heavy design helps prevent
damage to walls.
• Contemporary styling.
screws.
• 3" projection.
SPRING DOOR STOP
• 213/16" projection.
DOOR HOLDER
• Resilient non-matting tip provides
positive stopping action.
• Holds door open in any position.
screws.
415-824-4300
67
DOOR HARDWARE
SCHLAGE PLYMOUTH
SERIES LOCKS IN
VISUAL PACKS
Type
Passage
Privacy
Keyed Entry
Dummy
• Latch fits square or radius
corners or drive-in applications.
• Fits 23/8" or 23/4" brackets.
Code
ZA1520
ZA1521
ZA1522
ZA1523
• Bright brass finish.
SCHLAGE PLYMOUTH
SERIES ENTRY AND
SINGLE CYLINDER
DEADBOLT
Type
Entry and Single
Cylinder Deadbolt
• Combination visual pack.
Code
ZA1528
• Triple Option™ latch fits square
corner, radius corner or
drive-in latch application.
SCHLAGE DEADBOLTS
Type
• Triple Option™ latch fits square
corner, radius corner, or
drive-in application.
Deadbolt
Code
ZA1530
• Single cylinder deadbolt.
• Visual pack.
DOOR LOCK INSTALLATION KIT
• 3 easy steps.
Qty
Code
• GuideRight template for exact
alignment.
EA
ZA1510
68
415-824-4300
Z BAR/L METALS/ALUMINUM FLASHING
GRAVEL STOP
Size
Code
2 / ”x2”x10’
1 2
9VGRAV
STUCCO CORNER
Size
Code
2 / ”x2 / ”x10’
1 2
1 2
9VSTUC
STUCCO STOP
Size
Code
/ ”x3 / ”x10’
7 8
1 2
9VSTUS
Z BAR 10’
Size
3⁄8”
1⁄2”
5⁄8”
3⁄4”
11⁄8”
11⁄2”
415-824-4300
69
Code
9ZBAR3
9ZBAR4
9ZBAR5
9ZBAR6
9ZBAR8
9ZBAR1
Z BAR/L METALS/ALUMINUM FLASHING
SPECIAL Z BAR
Size
2”x11⁄2”x1⁄2”
Code
9ZBAR7
L METAL 10’
Size
Code
11⁄2”
2”
3”
5”
9ZBL14
9ZBL20
9ZBL30
9ZBL50
Size
Code
11⁄2”
9ZBC14
Size
Code
6”
12”
9AF605
9AF125
JOIST CAP 10’
ALUMINUM 50’ ROLLS
70
415-824-4300
VENTS
REDWOOD FOUNDATION VENTS
Size
16”x4”
16”x6”
16”x8”
Code
9ZVWS4
9ZVWS6
9ZVWS8
CEDAR FOUNDATION VENTS
Size
16”x6” with louver
16”x8” with louver
Code
9ZVWL6
9ZVWL8
REDWOOD RECTANGULAR VENTS
Size
16”x12”
16”x18”
16”x24”
Code
9ZVWG12
9ZVWG18
9ZVWG24
FOUNDATION VENTS
14 X 6
Louvered.
415-824-4300
71
Style
Code
Stucco
Flat Wood
Plastic
9ZVF15
9ZVF14
9ZVF16
Style
Code
W/8 Mesh
9ZVL14
VENTS/DRYWALL METALS
RAFTER VENTS
For both rustic and stucco
construction. Spring ends allow
variation in size of opening.
Galvanized steel, welded and
embossed for extra strength.
Holes punched for nails.
ROUND MINI VENTS
Size
Code
143⁄8”x31⁄2”
223⁄8”x31⁄2”
9ZVR14
9ZVR22
Size
Code
1”
2”
3”
4”
9ZVM10
9ZVM20
9ZVM30
9ZVM40
SOFFIT CONTINUOUS VENT 10’
Size
Type
Code
11⁄2”
21⁄2”
Stucco
Stucco
9ZVS14
9ZVS24
Size
Type
Code
21⁄2”
Plywood
9ZVT24
DRYWALL CORNERS
Size
Code
8’
10’
94DT08
94DT10
PAPER DRYWALL CORNERS
Size
8’
8’
72
Type
Code
Outside
Inside
94DT8A
94DT8B
415-824-4300
DRYWALL METALS
DRYWALL J MOLD
Size
EDGE GUARD
1⁄2”x8’
5⁄8”x8’
Code
94EG48
94EG58
DRYWALL L MOLD
Size
1⁄2”x8’
5⁄8”x8’
R.C. CHANNEL
Code
94LM48
94LM58
Size
Code
12’
94RC01
METAL STUDS
Size
25 G
11⁄4”x 21⁄2”x 8’
11⁄4”x21⁄2”x 10’
11⁄4”x 35⁄8”x 8’
11⁄4”x 35⁄8”x 10’
11⁄4”x 51⁄2”x 8’
11⁄4”x 51⁄2”x 10’
Code
94MS00
94MS00
94MS00
94MS00
94MS00
94MS00
METAL TRACK
Size
25 G
11⁄4”x 21⁄2”x 10’
11⁄4”x 35⁄8”x 10’
11⁄4”x 51⁄2”x 10’
Code
94MT00
94MT00
94MT00
PAN FRAMER SCREWS
Framing screw for 20–25GA metal
stud to track, unique grip-tite, pan
head. No. 2 phillips.
*Gold/yellow heads meet user’s
415-824-4300
73
Size
Code
6”x 7⁄16”
94PF76
DECK FASTENING SYSTEMS
DECKMASTER® BRACKETS
Beautiful decks–When you build a deck
with Deckmaster® fasteners, you will find
no unsightly nails or screws to
blemish the beauty of the wood.
The result is a smooth, unmarred
deck surface.
The Deckmaster® fastener was designed by a
professional deck builder to help deck boards
withstand extreme weather conditions, from snow and
ice to desert heat. Every deck board is double screwed
from the bottom creating a solid, stable deck.
Size
Type
Qty
Code
221⁄2”
Stainless
(special order)
EA
9DMASS
NAIL OR SCREW
INTO JOIST
2” Decking
2 SCREWS HOLD
EACH DECK BOARD
Construct a safer deck with Deckmaster® fasteners.
There are no screws or nails to pop up as the wood
shrinks. Wood splinters resulting from surface nails
or screws will be a hazard of the past. Bare feet are
always comfortable on the smooth surface of a deck
built with Deckmaster® fasteners.
Size
Type
Qty
Covers
Code
221⁄2”
221⁄2”
Galvanized
Galvanized
10/PCK
100/PCK
25SQ/FT
250SQ/FT
9DMAST1
9DMAST2
1” and 5⁄4” Decking
Why decks fail: with conventional deck construction,
screws or nails are driven through the top of planks in
wood joists. As wood weathers and shrinks, screws
and nails loosen and pop up becoming hazardous and
allowing water to penetrate through the deck boards
and joists causing wood rot. The wood is no longer
protected even if the surface has been preservative
treated. Deckmaster® fasteners protect the deck
surface by elimination the primary cause of deck
failure—moisture penetration through exposed
screw of nail holes on the top of the deck surface.
Size
Type
Qty
Covers
Code
221⁄2”
221⁄2”
Galvanized
Galvanized
10/PK
100/PK
25SQ/FT
250SQ/FT
9DMAST3
9DMAST4
DEC•KLIP™
Size
Joint Sp
No Clips/Sq/Ft
Clip requirements: (approximate
only).
2x6
2x6
2x4
2x4
2! centers
16" centers
2! centers
16" centers
1
1.5
1.8
2.3
Approved for use with all species of deck wood.
Including treated wood and Mobil Trex® decking.
74
TYPE
CODE
DEC•Klip
Starter Klip
9DCLIP
9DCSTR
415-824-4300
DECKS MADE EASY
THE STRATTON BRACKET
Frameworks Using Space Brackets
Stairs/steps made easy. Bolts
directly against any type of siding.
The Stratton Bracket was
specifically designed to meet or
exceed the national building code
requirements and has been tested
to safely support loads of more than
400LB when just 2 brackets are
properly used or installed.
2 x 6 Joist
2 x 8 Joist
2 x 10 Joist
2 x 12 Joist
BOWRENCH DECK TOOL
Up to 48" Apart
Up to 24" Apart
Up to 16" Apart
Up to 12" Apart
Code
9DECKB
Code
What is it?
ZTOOLT
It’s the best tool for straightening
(or bending) boards and joining
tongue & groove materials!
Where do you use it?
Decking, roofing, walls, T&G
boards, T&G plywood, T&G fiber
panels, boat building; what’s
your application?
IPÉ CLIP EXTREME KD
• Stainless steel reinforced, square style.
QTY
Code
• (175) IPÉ CLIP® Extreme Fasteners.
EA
9ICLIPX
• (190) #8x2 Stainless steel screws.
• (12) IPÉ plugs.
• (1) Drill bit & screw gun driver bit.
• (1) Instruction sheet.
• Brown only.
IPÉ PLUGS
QTY
Code
Extra
IPÉ PLUGS for placement in screw holes
of the starter deck boards.
100 pcs.
667494
IPÉ TORX DRIVE SCREWS
QTY
Code
Our high quality #8 stainless steel Torx drive
screws.
EA
9ITRIM
IPÉ TORX DRIVE SCREWGUN TIPS
QTY
Code
#10 Torx drive screwgun tips.
EA
3⁄8”
415-824-4300
75
91TORX
BISON LEVEL.IT® ADJUSTABLE DECK SUPPORTS AND COUPLERS
LC
C1
Size
Description
Qty
Code
13⁄8” - 41⁄2”
LC - Adjustable Pedestal
EA
94LIB2
0” - 11⁄2”
C1 - Gray Coupler
EA
94LIC5
adds up to 4”
C4 - Black Coupler
EA
94LIC4
(in combination w/ LC & LC1)
C4
BISON LEVEL.IT® ACCESSORIES
Size
Description
HD50
1⁄2” Fixed
Height
HD50 - Stackable Fixed
Height Support
EA
94HD50
HD75
3⁄4” Fixed
Height
HD75 - Stackable Fixed
Height Support
EA
94HD75
B11
1⁄16” Fixed
Height
B11 - Rubber Shim
EA
94LIB11
PS1
1⁄8”
Fixed
Height
PS1 - Plastic Shim
EA
94LIPS1
LD4
Compensates
for 1⁄4” per
foot slope
LD4 - Bottom Leveler
EA
94LILD4
PH5
Compensates
for 0 - 5⁄8” per
foot slop
PH5 - Top Leveler
EA
94LIPH5
FFB
12” - 12”
FFB - Floating
Foundation Base (Soil)
EA
94LIFFB
FIB
12” - 12”
FIB - Floating
Insulation Base (Roof)
EA
94LIFIB
DPH0
5⁄8”
DPHO - Stackable Fixed
Height Support
EA
94DPH0
DPH1 11⁄8” Fixed
Height
DPH1 - Stackable Fixed
Height Support
EA
94DPH1
Fixed
Height
Qty
ST18
1⁄8”
Spacer
ST18 - For Stone
EA
A4.5 - For Wood
EA
A4.5
4.8mm
Spacer Tab
FS1 - Fastening Kit For
Bison Wood Tiles
EA
FS1
76
Tab
Code
415-824-4300
EZ-STAIR® STAIR BUILDING KIT
•
•
•
•
Adjustable stair brackets.
Interior stairs.
spacer
Exterior stairs.
Concrete form work.
QTY
Code
2EA
8EA
94EZRP
94EZCB
bracket
pivot screws
stringer
EZ STAIR XTRA SPACERS
QTY
Code
8EA
94EZC5
3 EZ STEPS INSTALLATION INSTRUCTIONS
spacer
bracket
1 . Set the brackets on the two 2 x 6
stringer members using the spacers
and pivot screws.
pivot screws
stringer
rotate
SH
PU
2 . Remove spacers and rotate
brackets to adjust stair height.
cut ends
SH
PU
3 . Fix brackets in position, attach
risers and treads.
tread
riser
415-824-4300
77
SIMPSON PRODUCTS
A ANGLES
Material: 12 gauge.
W1
W2
Length
Finish: galvanized
41⁄2"
6"
8"
4"
11"
41⁄2"
6"
8"
2"
35⁄8"
11⁄2"
11⁄2"
2"
21⁄2"
2"
Codes: BOCA, ICBO, SBCCI No.
NER-421 (except A44).
Code
A44
A66
A88
A24
A311
A44 Angle
A88 Angle
A34/A35 FRAMING ANCHORS
Code
The A35 anchors exclusive bending
slot allows instant, accurate field
bends for all two-way and threeway ties. Balanced, and completely
reversible design permits the A35
to secure a great variety of
connections.
18 gauge galvanized. Some
products available in stainless steel
or Z-Max. A34 uses 8-8d x 11⁄2"
nails. A35 and A35F use 128d x 11⁄2" nails. A35 uses 9-8d x 11⁄2"
nails for connection types A1, E,
C1.
A34
A35
A35F
A35F Framing Anchor
NER-413; Dade County, FL No. 960719.10; City of L.A. No. RR 25119.
A35F
AC/LPC POST CAPS
Twin design allows easy
installation.
Material: 18 gauge.
Finish: galvanized.
Installation: install in pairs.
LPC–21⁄2" beams may be used if
10d x 11⁄2" nails are substituted for
10d commons.
Codes: BOCA, ICBO, SBCCI Nos.
NER-421, NER-443, NER-469; Dade
County FL 93-1016.1, 92-0828.05;
City of L.A. RR 25076.
Width
Length
39⁄16"
—
51⁄2"
—
39⁄16"
61⁄2"
41⁄2"
81⁄2"
81⁄2"
51⁄2"
Code
AC4
ACE4
AC6
ACE6
LPC4
Use two
LPC6
post caps
AC
ACE
78
LCP
415-824-4300
SIMPSON PRODUCTS
ADJUSTABLE POST BASES
Fully adjustable post base offers
moisture protection, structural
values, ease of installation, and
finished hardware appearance.
Standoff plate provides flat end
bearing for post and keeps post end
11⁄8" above surface moisture.
Width
Length
39⁄16"
39⁄16"
51⁄2"
39⁄16"
51⁄2"
51⁄2"
Width
Height
Code
AB44
AB46
AB66
2” minimum
sidecover
Finish: 12 gauge adjustment and
stand-off plates. 16 gauge base
cover. Galvanized.
Installation: post nail holes are sized
for 10d commons. Rectangular
adjustment plate assumes 1⁄2"
diameter anchorage. The AB is
supplied as shown; position the
post, secure the easy-access nut,
then bend up the fourth side. For
non-bolt, non-adjustment
installations, 3⁄16" holes for optional
nail holddown or powder-actuated
fasteners in a concrete or wood
AB
base are in the base cover. A 2"
minimum side cover is required to obtain
the full load. Not recommended for nontop-supported installations such as
fences.
Codes: BOCA, ICBO, SBCCI NER-393;
ALUMINUM POST STANDOFF
The APS stand-off height above
concrete or masonry floors or decks
reduces decay at post and column
ends.
31⁄4"
Code
1"
1"
51⁄8"
APS4
APS6
Material: cast aluminum.
Installation: attach to the post
before installation using four nail
holes. Embed a rod into concrete
and extend into wood member. For
nominal or rough sawn lumber.
APS4
BC POST CAPS/BASES
CAPS
W1
W2
L1
L2
H1
H2
39⁄16"
39⁄16"
27⁄8"
27⁄8"
Installed with 16d commons or
16d x 21⁄2" joist hanger nails. Not
recommended for non-topsupported installations such as
fences when used as a base.
39⁄16"
4"
51⁄2"
39⁄16"
4"
51⁄2"
47⁄8"
4"
43⁄8"
27⁄8"
4"
43⁄8"
3"
31⁄2"
3"
33⁄8"
3"
21⁄2"
3"
33⁄8"
BASES
W1
W2
L1
L2
H1
H2
Code
4
51⁄2"
51⁄2"
—
—
—
—
21⁄4"
NER-421; Dade County FL No. 920828.05; City of L.A. No. RR 25076.
—
—
—
—
31⁄4"
—
—
—
—
BC4O*
BC4OR
BC46O
BC6O
The BC series offers dual purpose
post cap/base for light cap or base
connections.
Material: 18 gauge galvanized.
39⁄16"#
BC4 Cap Bace
4"
33⁄8"
51⁄2"
*ALSO AVAILABLE IN 12 GAUGE
415-824-4300
79
3"
3"
3"
Code
BC4
BC46
BC4R
BC6
SIMPSON PRODUCTS
CB COLUMN BASES
W1
For columns that require high
structural values and rugged
performance.
Material: Simpson gray paint or
HDG.
3” minimum
sidecover
(2” for LCB)
W2
D
Code
39⁄16"
39⁄16"
8"
39⁄16"
51⁄2"
51⁄2"
51⁄2"
8"
8"
CB44
CB44R
CB46
CB66
CB66R
Installation: for full loads, minimum
side cover required is 3!. Install all
models with base plate flush with
concrete. Not recommended for
non-top-supported installations
such as fences.
Options: Rough and other sizes
available: specify W1 and W2
dimensions. Consult Simpson for
bolt sizes and allowable loads.
CB or LCB
NER-393 and NER-432; City of L.A.
Nos. RR 24818, RR 25074.
CBA COLUMN BASES
Code
Adjustable column base which
allows precise column placement
after the concrete cures. For new or
retrofitted nominal or rough 6x’s.
Bottom panel functions as a built-in
moisture barrier (partial barrier for
rough sizes.)
CBA66
Finish: galvanized.
Installation: install in pairs, using
two 16d nails for temporary
attachment while boring bolt holes.
Install all models with base plate
flush with concrete. Not
fences. Options: rough and other
sizes available: specify W1 and W2
dimensions. Consult Simpson fo bolt
sizes and allowable loads.
CB44 configuration
(CB46, CB66 similar)
Codes: BOCA, ICBO, SBCCI
Nos. NER-393 and NER-432;
Dade County FL No. 93-1016.1;
City of L.A. Nos. RR 24818, RR
25074.
80
415-824-4300
SIMPSON PRODUCTS
CS COILED STRAPS
Total
Length
Continuous utility straps which can
be cut to length on the job site.
Packaged in lightweight (about 40
lbs.) cartons. Available in retail
packs of 25!; convenient for the doit-your-selfer or contractors who
require smaller strap lengths, and
packaged in portable 10" square
cartons.
150!
End
Length
Gauge
14!
16
Code
CS16
Finish: galvanized. Some products
available in Z-Max; contact factory.
Installation: wood shrinkage after
strap installation across horizontal
wood members may cause strap to
buckle outward.
Codes: BOCA, ICBO, SBCCI NER-413
and NER-499; Dade County FL
93-1016.1.
CS16
DECK-TIE CONNECTORS
Code
Material: DRT8 is 18 gauge, DPT5 and
7 are 14 gauge.
DPT7
DRT8
Finish: Z-max
Installation: DPT5 and 7: testing shows
similar strength and deflection limits
when compared with 4 x 4 posts
attached to 2 x 8 rim joists with two 1⁄2"
machine bolts placed 31⁄2" apart. Install
in pairs at a recommended minimum
center-center spacing of 5". Use two
3"8" through bolts and 5–10d x 11$2"
nails for DPT5 (5–10d commons for
DPT7) per tie.
DRT8 Deck Railing Tie: eliminates
nailing into the top of hand railing.
Attaches 2 x 4 and 2 x 6 hand railing to
posts. Use four #8 x 11⁄4" flathead
wood screws. Drive prongs into post,
then two screws into the post and two
screws into the railing.
415-824-4300
DRT8
81
SIMPSON PRODUCTS
DS DRYWALL STOP
Code
Eliminates costly blocking at top
plate, end walls, and corners. A
typical residence will use several
hundred of these inexpensive clips
with a substantial savings in
blocking and labor. The installation
prongs provide even more
labor savings.
DS1
Material: 20 gauge.
Finish: galvanized.
Installation: 16" on center or less,
using 8d commons.
NER-413.
DS
EPC POST CAPS
Size
W1
W2
L1
L2
L3
No
4x4
4x4
4x6
4x6
4x6
4x6
6x6
6x6
39⁄16"
39⁄16"
39⁄16"
39⁄16"
51⁄2"
51⁄2"
51⁄2"
51⁄2"
39⁄16"
39⁄16"
51⁄2"
51⁄2"
39⁄16"
39⁄16"
51⁄2"
51⁄2"
25⁄8"
25⁄8"
25⁄8"
25⁄8"
49⁄16"
49⁄16"
49⁄16"
49⁄16"
11"
11"
13"
13"
11"
11"
13"
13"
73⁄8"
73⁄8"
91⁄4"
91⁄4"
73⁄8"
73⁄8"
91⁄4"
91⁄4"
EPC44-16
EPC44
EPC46-16
EPC46
EPC64-16
EPC64
EPC66-16
EPC66
EPC
SSTB ANCHOR BOLTS
• Rolled threads for tensile
capacity.
• Stamped bolt head.
• Stamped embedment line.
Size
Code
16"
20"
24"
28"
SSTB16
SSTB20
SSTB24
SSTB28
Special Order
82
Allowable Tension Load (133) 1.2
Model7 Stemwall Dia Length Avg
Concrete Concrete Concrete
No.
Width
Ult f9 c=2500psi
BLock BLock End
5
5
6
13640
⁄8 17 ⁄8
4420
1850
SSTB16
4780
5⁄8 215⁄8 14745
6
4600
1850
SSTB20
4780
5⁄8 25 5⁄8 14745
6
5175
1850
SSTB24
4780
7⁄8 29 7⁄8 32700
8
10100
4815
SSTB28
6385
7⁄8 34 7⁄8 32700
8
10100
4815
SSTB34
6385
7⁄8 36 7⁄8 32700
8
10100
4815
SSTB36
6385
415-824-4300
SIMPSON PRODUCTS
FLOOR BEAM LEVELERS
Height
Jack piers and standard floor beam levelers offer unique leveling simplicity
during and after construction. JPs allow two simple methods of installation
for economy and design versatility. Both models are adjustable; see table.
Threaded
(Min-Max)
Rod Length
2”-4”
5”-7”
13”-18”
43⁄4"
Material: 12 gauge plates, 3⁄4" threaded rod, 3⁄4" steel pipe.
4"
8"
Code
JP44
J57
J1318
Finish: None. Connectors installed in damp areas, or corrosive environments
that are not exposed to rain or periodic washing, will deteriorate at a faster
rate. Corrosion-resistant finish and maintenance can improve the connectors
service life.
Installation: Use all specified fasteners; see general notes. Holes are
provided for installation with 16d commons. Do not use J/JPs for dynamic
jacking of structures, such as houses.
Codes: BOCA, ICBO, SBCCI No. NER-413. City of L. A. No. RR
JP
FOUNDATION ANCHORS
This series is for retrofit or new
construction. These products may
be used together as a system or in
individual applications, designed and
tested for earthquake and high wind
conditions.
installation.Material: 12 gauge.
FA anchors eliminate vertical drilling
by nailing into the top of the mudsill.
They facilitate installation when
vertical space is limited, and resist
forces between the foundation and
mudsill.
NER-469 (FA8, FJA); City of LA No.
RR25158.
Finish: galvanized.
Qty
1⁄2"
2
2
2
1⁄2"
Installation: select and install concrete
anchor bolts in accordance with the
manufacturer’s recommendations.
FJA foundation joist anchors nail or
bolt directly into floor joist, and
provides a direct connection
between the foundation and joist. It
provides uplift and lateral resistance.
FSA foundation stud anchors nail or
bolt to floor joists or nail to studs.
Plywood shearwall may require
nitching with stud-to-foundation
Diameter
1⁄2"
FJA
FA
FSA
415-824-4300
83
Code
FA8
FJA
FSA
SIMPSON PRODUCTS
H SEISMIC AND HURRICANE TIES
Gauge
The H connector series provides
wind and seismic ties for trusses
and rafters.
Code
18
H1
H2
H2.5
H3
H4
H5
H6
Finish: galvanized; also available in
stainless steel or Z-Max.
20
18
16
Installation: H1 can be installed
with flanges facing outwards.
When installed inside a wall, a
birdsmouth cut is required. H2.5,
H3, H4, and H5 ties are shipped in
equal quantities of separate rights
and lefts.
H2
NER-422, NER-393, NER-499; Dade
County, FL No. 96-0719.10; City of
L.A. No. RR 24818.
H3
H2.5
H6
H1
H5
H4
HH HEADER HANGERS
For fast, accurate installation of door
and window headers and other cross
member details. HH header hangers
speed up the job, strengthen the
frame, and eliminate the need for
trimmers.
Width
Height
39⁄16"
51⁄2"
27⁄8"
51⁄4"
Code
HH4
HH6
Material: 16 gauge.
Finish: galvanized.
Codes: BOCA, ICBO SBCCI No. NER413; Dade County, FL No. 93-0828.4;
City of L.A. No. RR 25119.
HH
84
415-824-4300
SIMPSON PRODUCTS
HDA HOLDOWNS
Base Body
Holdowns are used to transfer tension loads between floors, to tie
pulins to masonry or concrete, etc. Use for overturn requirements
and other applications to transfer tension loads. All HDAs are selfjigging, ensuring code-required minimum 7! bolt diameter spacing
from the end of the wood member.
Gauge Gauge HB
7"
3"
3⁄8
"
12" 41⁄2"
10" 51⁄4"
7" 63⁄16"
SB
W
21⁄2"
3"
31⁄2"
HD6a, HD8A, HD10A’s seat design allows greater installation
adjustability. An overall width of 31⁄4" for the HD6A, HD8A and
HD10A provides for an easy fit in a standard 4x wall.
H
B
SO
21⁄2"
8"
25⁄8"
33⁄16" 93⁄8"
31⁄2"
31⁄8" 111⁄16" 37⁄16"
143⁄8"
177⁄8"
CL
" 11⁄2"
1⁄2"
21⁄16"
9⁄16" 21⁄16"
1⁄4
Code
HD2A
HD5A
HD6A
HD8A
HD10A
Special Features: single piece non-welded design results in higher
capacity. Load transfer plate eliminates the need for a seat washer.
Fewer inspection problems.
Finish: galvanized. HD8A may be ordered HDG; check with the
factory.
Installation: for an improved connection, use a steel nylon locking
nut or a thread adhesive on the anchor bolt. Bolt holes shall be a
minimum of 1⁄32" to a maximum of 1⁄16" larger than the bolt
diameter (per 1991 NDS, section 8.1.2.1.)
Standard washers are required on stud bolt nuts against the wood.
The Load Transfer Plate is an integral part of the HDA Hold down
and no washer is required.
Locate on wood member to maintain a minimum distance of seven
bolt diameters from the end of the member to the centerline of the
first bolt hole (HDAs are self-jigging; minimum required distance is
automatically maintained when end of wood member is flush with
the bottom of the holdown.)
To tie double 2x members together, the designer must determine
the fasteners required to bind members to act as one unit without
splitting.
For holdowns installed on the mudsill, anchor bolt nuts should be
finger-tight plus 1⁄3 to 1⁄2 turn with a wrench, with consideration
given to possible future wood shrinkage. Care should be taken to
not over-torque the nut, which may lead to premature anchor bolt
failure.
HD5A
Stud bolts should be snugly tightened (per 1991 NDS, section
8.1.2.4.)
Codes: BOCA, ICBO, SBCCI Nos. NER-393, NER-469; City of L.A.
Nos. RR 24818 and RR 25158.
HL HEAVY ANGLES AND GUSSETS
GA
Versatile angle gussets and heavy
angles promote standardization and
construction economy, and are
compatible with Strong-Tie
structural hardware.
7
7
7
Finish: Simpson gray paint.
L
D1
D2
D3
D4
Code
31⁄4"
21⁄2"
11⁄4"
31⁄4"
53⁄4"
5"
5"
11⁄4"
11⁄4"
—
21⁄2"
21⁄2"
2"
2"
2"
—
—
21⁄2"
HL33
HL35G*
HL55
HL35G* IN STOCK
Options: gussets may be added to
HL models when L%5" (specify G
after model number, as in HL46G.)
415-824-4300
W1 & W2
85
SIMPSON PRODUCTS
HU FACE MOUNT HANGERS
Joist Size
Most models have triangle and
round holes, which give high loads
when filled with common nails.
These heavy-duty connectors are
designed for schools and other
structures requiring additional
strength, longevity and safety
factors.
3!x12!
2x4
4x 6
4x 8
4 x 10
4 x 12
6x6
6x8
6 x 10
6 x 12
HU min. nailing
fill round holes.
HU max. nailing
fill round and
triangle holes.
Can be installed filling round holes
only, or filling round and triangle
holes for maximum values.
Gauge
W
H
B
14
29⁄16"
39⁄16"
105⁄8"
27⁄8"
53⁄16"
613⁄16"
85⁄8"
105⁄16"
43⁄16"
513⁄16"
75⁄8"
93⁄8"
21⁄2"
51⁄2"
Code
HU312
HU44
HU46
HU48
HU410
HU412
HU66
HU68
HU610
HU612
Codes: BOCA, ICBO, ICBO No.
5117; Dade County, FL No. 960719.09; City of L.A. Nos. RR
24947, RR 24818.
HU68
HUC FACE MOUNT HANGERS
Concealed flange.
Joist Size
4x 6
4x 8
4 x 10
4 x 12
6x6
Gauge
W
H
B
14
29⁄16"
105⁄8"
21⁄2"
Code
39⁄16"
51⁄2"
613⁄16"
85⁄8"
105⁄16"
43⁄16"
HUC46
HUC48
HUC410
HUC412
HUC66
Gauge
W
H
B
Code
14
29⁄16"
105⁄8"
613⁄16"
85⁄8"
105⁄16"
21⁄2"
HUC412
Concealed
Flanges
HUS FACE MOUNT HANGERS
Joist Size
Provides intermediate load-carrying
capacity. Available with the head
flanges turned.
4x 6
4x 8
4 x 10
4 x 12
NER-209, NER-413, NER-421, NEW499; Dade County, FL No. 930828.8, 93-0824.07; City of L.A.
Nos. RR 24949, RR 25076.
HUS46
HUS48
HUS410
HUS412
HUS412
86
415-824-4300
SIMPSON PRODUCTS
IS INSULATION SUPPORTS
Size
Easy one-hand installation to hold
insulation in place. Mitered edges
ensure a tight fit when installed
between joists.
Code
151⁄2"
231⁄2"
IS16
IS24
Installation: Install insulation
supports between joists. IS16
(151⁄2" long) for 16" o.c. spacing;
IS24 (231⁄2" long) for 24" o.c.
spacing. Follow the insulation
manufacturer’s installation
recommendations.
LU FACE MOUNT HANGERS
Joist Size
Value engineered for strength and
economy! Just a tap of the hammer
at each speed prong secures the LU
for easy nailing. Precision formed
— engineered for installation ease
and design value.
2x4
2 x 6, 8
2 x 8, 10
2x10, 12, 14
Gauge
W
H
B
20
19⁄16"
31⁄8"
43⁄4"
63⁄8"
713⁄16"
11⁄2"
Code
LU24
LU26
LU28
LU210
NER-393.; Dade County, FL No. 960719.09; City of L.A. Nos. RR
24947, RR 24818.
LSSU LIGHT SLOPED/SKEWED U HANGERS
Joist
Size
All models are skew- and slopeadjustable on the job site! Attach
joists or rafters to headers, sloped
up or down, and skewed left or
right, up to 45º.
2x8
2 x 10 & up
3 x 10 & up
W
H
19⁄16"
71⁄8"
19⁄16"
29⁄16"
81⁄2"
81⁄2"
Material: 18 gauge.
Finish: galvanized.
Installation: attach the sloped joist
at both ends so that the horizontal
force developed by the slope is fully
supported by the supporting
members.
NER-209, NER-421, NER-432. City
of L.A. Nos. RR24949, 25074 and
25076.
LSSU
415-824-4300
LSSU28
87
Code
LSSU28
LSSU210
LSSU310
SIMPSON PRODUCTS
LUS FACE MOUNT HANGERS
Joist Size
A light duty joist hanger with the
lowest installed cost. Speed prongs
secure the LUS for easy nailing.
Gauge
2’x 4’
18
2’x 6’,8’
2’x 8”,10’
2’x 10’, 12’, 14’
4’x 4’
4’x 6’, 8’
4’x 8’, 10’
4’x 10’, 12’, 14’
4’x 12’ , 14’
DBL 2’x 4’
DBL 2’x 6’, 8’
DBL 2’x 8’, 10’
DBL 2’x 10’, 12’, 14’
MONKEY PAW™ ANCHOR
BOLT HOLDERS
2’x 4’
H
B
Code
19⁄16”
31⁄8”
43⁄4”
65⁄8”
713⁄16”
3”
43⁄4”
63⁄4”
83⁄4”
103⁄4”
31⁄8”
47⁄8”
7”
9”
13⁄4”
LUS24
LUS26
LUS28
LUS210
LUS44
LUS46
LUS48
LUS410
LUS414
LUS24-2
LUS26-2
LUS28-2
LUS210-2
39⁄16”
31⁄8”
Bolt
Size
Offers significant savings over
plywood or 2x wood holders. Use
the MKP5/8 to install the SSTB16,
20, and 24. May be used several
times. Stabilizes bolt by providing
three-point support against lateral
concrete pressure. Alignment
arrows (left or right) match the
SSTB bolt head arrow. Stamped for
2x4 ro 2x6 mudsill placement. No
nut required to hold bolt in place.
When removed, the MKP cleans the
bolt thread of concrete.
W
Dia
5⁄8"
2”
Finish
galvanized
Code
MKP5⁄8
MKP 5/8” with SSTB16
NAILS
Description
Strong-Tie nails and structural
fasteners have been developed as
the optimum fasteners for
connector products. Special lengths
afford economy of purchase and
installation, and depth compatibility
with framing members. Nail
specifications include head size,
thickness, steel and shank design,
and point configuration to ensure
conformity to published values.
(8d) 101⁄4GA x 11⁄2" Smooth Shank
(10d) 9GA x 11⁄2" Smooth Shank
(16d) 8GA x 21⁄2" Smooth Shank
(20d) 0.192 x 21⁄8" Annular Ring
(20d) 0.192 x 13⁄4" Annular Ring
0.250 x 21⁄2" Annular Ring
88
Metric
Equivalent
Finish
Code
3.3MM x 38.1MM
3.8MM x 38.1MM
4.1MM x 63.5MM
4.9MM x 54.0MM
4.9MM x 44.5MM
6.4MM x 63.5MM
HDG
HDG
Bright
Bright
Bright
Bright
N8
N10
N16
N20AN
N20A
N54A
415-824-4300
SIMPSON PRODUCTS
NAIL STOPPERS
Help prevent nails from piercing
water pipes and electrical lines.
Installed over utilities that prevent
framing members the NS provides a
warning and allows repositioning of
the nail. 16 gauge steel conforms to
the National Electric Code. Install
with 8d commons or prongs.
Size
3"
Material
Finish
16GA
galvanized
Code
NS1
NS1 or NS2
PB POST BASES
Locking prongs eliminate bolts or
inserts in concrete. One-piece
design assures maximum strength.
Finish: 12 gauge galvanized.
Installation: Holes are provided for
installation with either 16d
commons or 1⁄2" bolts. A 2"
minimum sidecover is required to
obtain the full load. Not
fences.
Width
Length
39⁄16"
31⁄4"
4"
51⁄2"
51⁄2"
31⁄4"
31⁄4"
53⁄8"
Code
PB44
PB44R
PB46
PB66
Codes: BOCA, ICBO, SBCCI NER443. Dade Co., FL No. 92-0828.05;
2” minimum sidecover
PB44
PC POST CAPS
PC
Size
W1
W2
L1
L2
L3
No
4x4
4x4
4x6
4x6
4x6
4x6
6x6
6x6
39⁄16"
39⁄16"
39⁄16"
39⁄16"
51⁄2"
51⁄2"
51⁄2"
51⁄2"
39⁄16"
39⁄16"
51⁄2"
51⁄2"
39⁄16"
39⁄16"
51⁄2"
51⁄2"
25⁄8"
25⁄8"
25⁄8"
25⁄8"
49⁄16"
49⁄16"
49⁄16"
49⁄16"
11"
11"
13"
13"
11"
11"
13"
13"
73⁄8"
73⁄8"
91⁄4"
91⁄4"
73⁄8"
73⁄8"
91⁄4"
91⁄4"
PC44-16
PC44
PC46-16
PC46
PC64-16
PC64
PC66-16
PC66
PLATE STRAPS
Material
16ga
RPS
415-824-4300
89
L
H
11⁄2"
11⁄2"
11⁄2"
185⁄16"
225⁄16"
285⁄16"
Code
RPS18
RPS22
RPS28
SIMPSON PRODUCTS
PLYWOOD SHEATHING CLIPS
Size
Material
Finish
1⁄2"
20 gauge
galvanized
Code
PSC04
PSC05
PSC06
5⁄8"
3⁄4"
Provides
1/8” gap
PSCL
PREDEFLECTED HOLDOWNS
The Predeflected Holdown (PHD) is
a revolutionary development in
holdown connections. This
connector is a predeflected during
manufacturing, to virtually eliminate
deflection from material stretch.
Gauge
W
H
B
CL
14
3"
95⁄16"
119⁄16"
1313⁄16"
173⁄16"
27⁄8"
27⁄8"
13⁄8"
13⁄8"
12
10
Code
PHD2
PHD5
PHD6
PHD8
Wood screws reduce slip due to
overdrilled bolt holes. Smaller
centerline reduces eccentricity in
the stud. No stud bolts to
countersink. the slot in the seat
provides anchor bolt adjustment.
Connectors 3" width fits easily on a
4x wall.
Material: see table.
Finish: galvanized.
Installation: place over the anchor
bolt. Install Simpson’s SDS1⁄4"x 3"
wood screws (sold separately.) For
an improved connection, use a steel
nylon locking nut or a thread
adhesive on the anchor bolt. To tie
double 2x members together, the
designer must determine the
fasteners required to bind members
to act as one unit without splitting
the wood.
PHD
Codes: submitted to ICBO and City
of L.A. in 10/96.
REINFORCING AND SKEWABLE ANGLES
L – Curved metal speed prong reduces labor and
overall construction cost. Staggered nail pattern
reduces the possibility for splitting and allows
installation on both sides of a member.
LS – Field-adjustable angles attach members
intersecting at angles. Bend one time only. Joist
must be constrained against rotation
(for example, with solid blocking) when using a
single LS per connection.
Codes: BOCA, ICBO, SBCCI Nos. NER-413, NER443; City of L.A. Nos. RR 25119, 25149
Size
Material
3"
5"
7"
9"
33⁄8"
47⁄8"
63⁄8"
16GA
18GA
Code
L30
L50
L70
L90
LS30
LS50
LS70
L70
90
415-824-4300
SIMPSON PRODUCTS
ROTATED COLUMN END CAPS
Width1
The industry standard column cap.
Precision factory gang-punched
holes speed installation.
35⁄8"
35⁄8"
51⁄4"
51⁄2"
Material: CC44, CC46, CC64, CC66
are 7 gauge; all others are 3 gauge.
Width2
35⁄8"
51⁄2"
51⁄2"
51⁄2"
Finish: Simpson gray paint; may be
ordered HDG.
Options: straps may be rotated 90º
where W1% W2. For special,
custom, or rough cut lumber sizes,
provide dimensions. An optional W2
dimension may be specified with
any column size given (note that the
W2 dimension on straps rotated 90º
is limited by the W1 dimension.)
Column caps with W1, L, H1, and
hole schedules different from the
shown dimensions may be special
Width1
CC66
ordered. Provide a drawing to
ensure accuracy. For end
conditions, specify ECC.
L dimensions will vary from 51⁄2
to 101⁄2. Uplift loads do not
apply to the ECC. ECC9 and 10
use four beam bolts.
SIMPSON STRONG-DRIVE®
4CUT™ INTERIOR AND
EXTERIOR SCREW
The Simpson Strong-Drive® screw
(SDS) is a 1⁄4" diameter structural
wood screw ideal for various
connector installations as well as
wood-to-wood applications. It
installs with no predrilling and has
been extensively tested in various
applications. For 2007 the SDS is new
and improved with a patented new
easy driving tip and a corrosion
resistant coating.
35⁄8"
35⁄8"
51⁄4"
51⁄2"
51⁄2"
91
35⁄8"
51⁄2"
51⁄2"
35⁄8"
51⁄2"
CC
H1
Code
7"
11"
13"
11"
4"
61⁄2"
8"
61⁄2"
CC44
CC46
8CC51⁄4-6
CC66
ECC
H1
Code
51⁄2"
81⁄2"
91⁄2"
71⁄2"
71⁄2"
4"
61⁄2"
8"
61⁄2"
61⁄2"
ECC44
ECC46
ECC51⁄4-6
ECC64
ECC66
Length
Size
Qty
Finish
11⁄2"
2"
21⁄2"
3"
31⁄2"
41⁄2"
6"
25/BOX
25/BOX
25/BOX
25/BOX
10/BOX
10/BOX
10/BOX
Double Barrier
Size
Qty
Finish
300/CASE
250/CASE
200/CASE
150/CASE
125/CASE
100/CASE
100/CASE
Double Barrier
11⁄2"
2"
• The patented 4CUT™ tip has a square
21⁄2"
core and serrated threads to reduce
• A new Double-Barrier Coating 3"
installation torque and make driving
31⁄2"
finish provides corrosion
easier with no predrilling and minimal
resistance superior to hot-dip 41⁄2"
wood splitting
galvanization. Now one screw 6"
• 3⁄8" hex washer head is stamped with
can handle interior, exterior
the No-Equal sign and fastener length
and certain pressure-treated
for easy indentification after installation.
wood applications
415-824-4300
Width2
Length
Code
9DBB14
9DBB20
9DBB24
9DBB30
9DBB34
9DBB44
9DBB60
Code
9DBC14
9DBC20
9DBC24
9DBC30
9DBC34
9DBC44
9DBC60
SIMPSON PRODUCTS
STANDOFF POST BASES
Provides tested capacity. Features
1" stand-off height above concrete
floors, code-required when
supporting permanent structures
that are exposed to the weather or
water splash, or in basements.
Reduces the potential for decay at
post and column ends.
ABE and ABU’s base design
includes anchor bolt adjustment
slot. Four-sided stand-off plate
increases download support and
provides attractive appearance.
2” minimum
sidecover
W1
W2
39⁄16"
31⁄2"
39⁄16"
51⁄2"
39⁄16"
51⁄2"
39⁄16"
31⁄2"
51⁄8"
31⁄2"
57⁄16"
31⁄2"
D
L
—
—
5"
71⁄8"
67⁄8"
31⁄2"
31⁄2"
3"
13⁄4"
21⁄4"
3"
21⁄4"
HB
Code
13⁄4"
5⁄8"
45⁄16"
41⁄2"
37⁄16"
ABE44
ABU44
ABU66
CBS44
CBS66
PBS44
ABE44
CBS and PBS embed into wet
concrete up to the bottom of the 1"
standoff base plate. A 3" minimum
side cover is required to obtain the
full load for CBS; 2" for PBS. Holes
in the bottom of the PBS and CBS
straps allow for free concrete flow.
1” standoff
satisfies code
requirements
3” minimum
sidecover
2” minimum
sidecover
6 gauge, galvanized. Some products
available in Z-Max. Not
fences. For pre-poured anchors,
embed 4& into concrete. For epoxy
or wedge anchors, select and install
according to anchor manufacturer’s
recommendations; anchor diameter
shown in table. Install requires
washer.
CBS44
PBS44
NER-422, NER-432, NER-469;
City of L.A. Nos. RR 25064, 25074,
25158; Dade County FL No. 93-1016.1
STRAP TIES
Piling straps connect wood pilings
to floor girders in elevated
structures. Hot-dipped galvanized
for greater corrosion resistance.
Install where plates or soles are
cut, at wall intersections, and as
ridge ties.
Codes: BOCA, ICBO, SBCCI No.s
NER-413 and NER-443; Dade
County, FL No. 93-0828.7. City of
L.A. Nos. RR 25119, 25149.
Width
Length
Material
Code
21⁄16"
21⁄16"
21⁄16"
21⁄16"
11⁄2"
27"
37"
48"
60"
185⁄16"
225⁄16"
285⁄16"
95⁄16"
1213⁄16"
165⁄16"
12GA
MST27
MST37
MST48
MST60
RPS18
RPS22
RPS28
ST292
ST2122
ST2115
ST6215
ST6224
ST22
ST6236
21⁄16"
21⁄16"
3⁄4"
21⁄16"
21⁄16"
11⁄4"
21⁄16"
MSTI
92
10GA
16GA
20GA
16GA
235⁄16"
215⁄8"
3313⁄16"
14GA
415-824-4300
SIMPSON PRODUCTS
SUR/SUL SKEWED 45º HANGERS
Joist Size
Standardized and code-listed 45º
skewed hangers. Angled slots
direct nails to allow speedy and
proper installation of the nails.
W
H
B
A1
A2
Code
2 x 6,8
2 x 10,16
19⁄16"
19⁄16"
5"
81⁄8"
2"
2"
1"
1"
13⁄8"
13⁄8"
SUR/L26
SUR/L210
Material
L
H
B
Qty
Dia
Code
7GA ptd
7GA ptd
7GA ptd
7GA ptd
7GA ptd
7GA ptd
7GA ptd
7GA ptd
6"
8"
12"
16"
6"
12"
12"
16"
6"
8"
12"
16"
5"
8"
12"
16"
11⁄2"
2"
2"
21⁄2"
11⁄2"
2"
2"
21⁄2"
3
3
3
4
3
3
3
6
3⁄8
66L
88L
1212L
1616HL
66T
128T
1212T
1616HT
Material: 16 gauge.
Finish: galvanized.
Installation: these hangers will
normally accommodate a 40º to 50º
skew. SUR=skewed right;
SUL=skewed left. The joist end
may be square cut or bevel cut.
Codes: ICBO No. 5117; City of L.A.
RR 24947; Dade County, FL No. 930824.07.
SUL
T AND L STRAP TIES
66T
66L
1⁄2
1⁄2
5⁄8
3⁄8
1⁄2
1⁄2
5⁄8
TS TWIST STRAPS
Length
Twist straps provide a tension
connection between two wood
members. An equal number of right
and left hand units are supplied in
each carton unless ordered
otherwise.
9"
115⁄8"
173⁄4"
Material: 16 gauge.
Finish: galvanized. Some products
available in stainless steel and ZMax.
Installation: use all specified
fasteners.
415-824-4300
TS
93
Total Fasteners
8-16d
10-16d
14-16d
Code
TS9
TS12
TS18
SIMPSON PRODUCTS
TENSION TIES
Tension ties are ideal for retrofit or
new construction and provide postpour, concrete-to-wood
connections. MTT28B amy be
ordered HDG; check with the
factory.
Strap
Plate
W
L
CL
Code
12GA
7GA
21⁄16"
27"
15⁄8"
MTT28B
NER-393; City of L.A. No. RR24818.
MTT28B
TIE PLATES
Width
TPs are nail-on tie plates. TPAs are
flanged for added support.
Length
No of Nail Holes
11"
9"
11"
7"
50
54
66
60
31⁄8"
41⁄8"
41⁄8"
53⁄4"
Material: 20 gauge.
FInish: galvanized.
Installation: holes are sized for 8d
common or 8d x 11⁄2" nails.
Code
TP311
TP49
TP411
TP57
TP
U FACE MOUNT HANGERS
Joist Size
The standard U hanger provides
flexibility of joist to header
installation. Some models have
speed prongs for fast installation.
Versatile fastener selection with
tested allowable loads.
Gauge
2x4
16
2 x 6,8
2 x 10, 12, 14
2 x 14, 16
DBL 2 x 4
DBL 2 x 6, 8
DBL 2 x 10
Rough 2 x 4
Rough 2 x 6, 8
Rough 2 x 10,12,14
W
H
B
19⁄16"
31⁄8"
11⁄2"
43⁄4"
713⁄16"
10"
3"
5"
81⁄2"
35⁄8"
55⁄8"
91⁄8"
2"
31⁄8"
2"
2"
2"
Code
U24
U26
U210
U214
U24-2
U26-2
U210-2
U24R
U26R
U210R
U210
94
415-824-4300
SIMPSON PRODUCTS
UNIVERSAL FOUNDATION PLATE
Code
The UFP10 Retrofit Foundation Plate
cuts installation time in half!
Designed to connect when the
mudsill is offset from the foundation
up to 21⁄2" or extended beyond the
foundation up to 1⁄2". UFP may be
used in place of FA, HFA and FAP.
UFP10
Material: 14 gauge.
Finish: galvanized.
Codes: City of L.A. RR 25281.
UFP10 on a
straight foundation with
offset mudsill
WALL BRACING
Length
Designed to fulfill the same code
bracing requirements as 1 x 4 let-in
bracing, but less expensive and
faster to install. Resists racking
during construction. Not designed
to replace shearwall load-carrying
components.
53⁄8"
9!
11! 43⁄8"
11! 43⁄4"
11! 43⁄8"
Material: 16 gauge.
Finish: galvanized.
Installation:
WB and WBC: install in “X” pairs or
in opposing “V” fashion. Use with
16" or 24" o.c. studs.
CWB: use with 16" o.c. studs.
Established run-line using the
bracing as a straight edge. Single
cut a saw kerf 1" deep along the
run line. If the wall is pre-framed on
the floor, place the part into the
saw kerf, and put one nail into the
top plate, bottom plate and studs
according to the nailing schedule.
WB
NER-413, NER-432, NER-443, NER422; Dade County, FL. 93-0824.07:
City of L.A. RR 25074, RR 25119,
RR 25149.
415-824-4300
95
Angle
Wall Size
Code
8!
60º
45º
WB106
WB126
WB126C
CWB126
SIMPSON PRODUCTS
WT WEDGE FORM TIES
Especially designed for low
foundation wall applications. 5⁄8"
wide formed “V” design for rigidity
allows accurate form spacing and
support.
Wall Thickness
Code
6"
8"
10"
12"
Material: 18 gauge.
Finish: galvanized.
WT6
WT8
WT10
WT12
WT8
Installation: not recommended for
wall pours greater than 4! high. Fits
1" or 2" nominal form lumber. Wall
thickness from 6" to 12".
WI WEDGE
Material: 18 gauge.
Gauge
Finish: galvanized.
18
Code
W1
Installation: use two 31⁄2" long
wedges for each tie.
W1
COLUMN CAP
W1
W2
L
H
Qty
3/”
51/2”
3/”
51/2”
7”
11”
4”
61/2”
EA
5 8
5 8
EA
Code
CC44HDG
CC66HDG
COLUMN CAP
W1
W2
L1
L2
H
Qty
Code
3/”
51/2”
3/”
51/2”
5/”
71/2”
6/”
91/2”
4”
61/2”
EA
ECC44HDG
ECC66HDG
5 8
96
5 8
1 2
1 2
EA
415-824-4300
SIMPSON PRODUCTS
STAND OFF POST BASE
W
39/16”
51/2”
L
H
Qty
39/16”
59/16”
21/4”
3”
EA
EA
Code
AB44Z
AB66Z
REINFORCING ANGLE
Qty
L50
EA
EA
Code
L50Z
L70Z
L70
REGULAR POST BASES
W
39/16”
51/2”
L
Qty
31/4”
51/4”
EA
EA
Code
PB44Z
PB66Z
2” MINIMUM SIDECOVER
POST CAP
W1
W2
L1
L2
L3
Qty
Code
3/ ”
51/2”
3/ ”
51/2”
2/”
49/16”
11”
13”
7/ ”
91/4”
EA
PC4416Z
PC66Z
9 16
415-824-4300
97
9 16
5 8
5 16
EA
SIMPSON PRODUCTS
HOLDDOWNS
COLUMN BASES
HB4
SB
W
H
B
49/16”
63/16”
21/2”
31/2”
23/4”
31/4”
8”
149/16”
29/16”
37/16”
1 5/16" for 5/8" bolts
1 1/2" for 3/4" bolts
CL
Qty
Code
/”
/ ”
17/16”
21/16”
EA
HD2AHDG
HD8AHDG
3 8
9 16
EA
W1
W2
D
Qty
Code
3/ ”
51/2”
3/ ”
51/2”
8”
8”
EA
CB44HDG
CB66HDG
9 16
DOUBLE SHEAR JOIST
HANGERS
SO
W
1/ ”
19/16”
31/8”
19/16”
31/8”
19/16”
31/8”
39/16”
39/16”
39/16”
9 16
9 16
EA
H
B
Qty
Code
3/”
43/4”
47/8”
65/8”
7”
713/16”
9”
3”
43/4”
63/4”
1/”
13/4”
2”
13/4”
2”
13/4”
2”
2”
2”
2”
EA
LUS24Z
LUS26Z
LUS26-2Z
LUS28Z
LUS28-2Z
LUS210Z
LUS210-2Z
LUS44Z
LUS46Z
LUS48Z
H
Qty
11/2”
EA
1 8
3 4
EA
EA
EA
EA
EA
EA
EA
EA
EA
STAIRCASE ANGLES
W
101/4”
Code
TA10Z
TA9Z
TA10
98
415-824-4300
SIMPSON STAINLESS STEEL CONNECTORS
NAILS
Size
11⁄2" 8d
11⁄2" 10d
21⁄2" 8d
3" 10d
31⁄2" 16d
Gauge
PCS/LB
.134
.148
.131
.148
.162
152 EA
122 EA
94 EA
67 EA
44 EA
Code
96SSN8
96SSN10
96SS8D
96SS10D
96SS16D
FRAMING ANCHOR
Size
Fastener
Code
x
17⁄16" x 3"
8-SSN8
12-SSN8
9A34SSS
9A35SSS
Size
Fastener
17⁄16"
21⁄2"
POST BASE
4x4
4x6
6x6
12-SS16D or 2-SS
1⁄2
MB &
Code
5⁄8
Anchor Bolt
9ABU44S
9ABU46S
9ABU66S
POST CAPS
AC4SS
Size
Fastener
Code
4 x Stock
6 x Stock
4 x Stock
6 x Stock
20-SS16D
28-SS16D
20-SS16D
20-SS16D
9AC4SSS
9AC6SSS
9ACE4SS
9ACE6SS
ACE4SS
99
415-824-4300
END COLUMN CAP
End Column Cap
Size
AND
4x4
4x6
6x6
COLUMN CAP
Column Cap
Size
4x4
4x6
6x6
End Column Cap
Fastener
4-SS 5⁄8 MB
6-SS 5⁄8 MB
6-SS 5⁄8 MB
Fastener
4-SS 5⁄8 MB
6-SS 5⁄8 MB
6-SS 5⁄8 MB
Code
9ECC44S
9ECC46S
9ECC66S
Code
9CC44SS
9CC46SS
9CC66SS
Column Cap
POST CAP
Size
4 x Stock
Fastener
12-SS16D
or
2-SS 1⁄2 MB
Code
9BC4SSS
POST BASE
Size
Fastener
4x4
4x6
6x6
2-5⁄8
SSMB
2-5⁄8 SSMB
2-5⁄8 SSMB
Size
Fastener
H2
H2.5
H3
H4
H5
H8
H10
10-SSN8d 1 /
10-SSN8d 11/2
8-SSN8d 11/2
8-SSN8d 11/2
8-SSN8d 11/2
10-SS10d 11/2
16-SS8d 11/2
Code
9CB44SS
9CB46SS
9CB66SS
HURRICANE TIE
415-824-4300
100
Code
1 2
9H2SSSS
9H25SSS
9H3SSSS
9H4SSSS
9H5SSSS
9H8SSSS
9H10SSS
POST CAP UNIVERSAL
Size
Fastener
Code
4 x Stock
24-SS16D
9LCE4SS
Size
Fastener
Code
8SS10D
9LS50SS
Light Shear Joist Hanger
Size
Fastener
Code
SKEWABLE ANGLE
47⁄8"
LIGHT SHEAR JOIST
HANGER
AND
LIGHT DOUBLE SHEAR
JOIST HANGER
Long
2 x 6, 8
DBL 2 x 6, 8
8-SS10D
8-SS16D
9LUS26S
9LUS27S
Light Double Shear
Joist Hanger
Size
Fastener
Code
2 x 10, 12, 14
DBL 2 x 10, 12, 14
12-SS10D
14-SS16D
9LUS21S
9LUS22S
Size
Fastener
Code
9”
10”
5- / x 1 / SS Lag
7-1/4 x 11/2 SS Lag
Light Double
Shear Joist Hanger
Light Shear
Joist Hanger
STAIRCASE ANGLE
101
1 4
1 2
9TA9SSS
9TA10SS
415-824-4300
SIMPSON STAINLESS STEEL FASTENERS
MACHINE BOLTS STAINLESS
Size
Code
x 41⁄2"
x 61⁄2"
5⁄8" x 41⁄2"
5⁄8" x 61⁄2"
99M444S
99M464S
99M544S
99M564S
1⁄2"
1⁄2"
HEX NUTS STAINLESS
Size
Code
9HN04S
9HN05S
1⁄2"
5⁄8"
WASHERS STAINLESS
Size
Code
99HW04S
99HW05S
1⁄2"
5⁄8"
LAG SCREW STAINLESS
Size
1⁄4"
415-824-4300
102
x
Fastener
11⁄2"
Code
99L214S
SAFETY EQUIPMENT
3M PARTICLE MASK
Style
Description
Qty
Code
8210#
Nuisance Dust
(double strap)
With Valve
Comfort Mask
Sanding & Fiberglass
Paint & Finish
Latex Paint & Odor
Woodworking & Welding
20EA
95MASC
10EA
5EA
95MASKV
95MAS1
95MAS2
95MAS3
95MAS4
95MAS5
8511#
COMFO ELITE® RESPIRATOR
Size
The Comfo Elite Respirator provides
protection against a variety of
respiratory hazards. The Comfo Elite
Respirator, available in black
silicone, has a unique sealing
surface designed to reduce
facepiece slippage. The Comfo Elite
Respirator comes in small, medium,
and large sizes. NIOSH certified.
EA
EA
EA
WARNING
EA
EA
Code
Facepiece, Confo Elite, Silicone, Black, Small
Facepiece, Confo Elite, Silicone, Black, Medium
Facepiece, Confo Elite, Silicone, Black, Bigger
95MAS6
95MAS7
95MAS8
OV
CL
SD
CD
HC
HS*
**Effective against, but not NIOSH approved for Iodine Vapor
EA
Description
COMFO® RESPIRATOR
CARTRIDGES
*Escape only.
EA
Organic Vapor
Chlorine
Sulfur Dioxide
Chlorine Dioxide
Hydrogen Chloride
Hydrogen Sulfide
Qty
Code
1 PR
95MAS9
AM Ammonia
MA Methylamine
FM Formaldehyde
HF Hydrogen Fluoride
MV Mercury Vapor
MV
P100 Filter Type &
R95 Efficiency***
N95
See Notes below 2,3,4
Below is a partial list of gaseous materials for which chemical cartridges respirators must not be used for
respiratory protection (for routine use) regardless of concentration or time of exposure. Failure to follow this
warning can result in serious personal injury or death. This partial list is far from complete and is offered as
a guide to many of the contaminants found in industry. Contact MSA for further information on other
specific materials.
Acrolein
Hydrogen cyanide
Nitric acid
Phosphorus trichloride
Aniline
Hydrogen selenide
Nitro compounds
Stibine
Arsine
Methanol
Nitrogen oxides
Sulfur chloride
Bromine
Methyl bromide
Nitroglycerin
Urethane or other
Carbon monoxide
Methyl chloride
Nitromethane
Diisocyanate-containing paints
Diisocyanates
Methylene chloride
Phosgene
Dimethyl sulfate
Nickel carbonyl
Phosphine
Vinyl chloride
Call 1-800-MSA-2222 for the latest information on 42 CFR 84 regulations and newly-approved respirators
and cartridges.
***Definitions
P100-Particular Filter (99.97% filter efficiency level) effective against all particulate aerosols.
N95-Particulate Filter (95% filter efficiency level) effective against particulate aerosols free of oil; time use
restrictions may apply.
R95-Particulate Filter (95% filter efficiency level) effective against all particulate aerosols; time use
restrictions may apply.
Notes:
1. Do not use in atmospheres containing less than 19.5 percent oxygen, in atmospheres containing gases or
vapors or in atmospheres immediately dangerous to life and health.
2. Do not use in atmospheres containing less than 19.5 percent oxygen, or in atmospheres immediately
dangerous to life and health.
3. Do not wear for protection against organic vapors with poor warning properties or those which generate
high heats of reaction with the sorbent material in the cartridge.
4. 99.97 percent efficient against 0.3 micron DOP.
SAFETY GOGGLES
Code
These soft, vinyl goggles offer
protection for eyes against flying
particles, dust and splash. Frame is
perforated for maximum ventilation,
has adjustable headband.
415-824-4300
ZSPEC4
103
SAFETY EQUIPMENT
SAFETY GLASSES
Large 3MM poly-carbonate lenses.
Astro Spec 3000.
ADJUSTABLE BACK
SUPPORT BELTS
Adjustable size support belts with
built-in elastic suspender.
Comfortable back support for
everyday use. Use to reduce or
prevent lower back pain or strain.
Color
Code
Clear
Gray
Mirrored
ZSPEC1
ZSPEC2
ZSPEC3
Size
Code
Large
Medium
ZBELTL
ZBELTM
SAFETY CONSTRUCTION
HARD HATS
Color
Code
• Constructed of durable high
density polyethylene.
White
Yellow
ZHAT20
ZHAT40
• Heavy duty inner suspension.
• Meets safety standard
requirements.
• Adjusts to any head size.
KNEE PADS
Code
• Tough, hard plastic outer shell
covers and protects entire knee.
ZTOL30
• Hinged for natural motion of the
knee.
• 1⁄2” closed cell foam inner pad.
• Elastic woven straps.
• New speed clips just slip
in place.
EAR PLUGS
Disposable ear plug that fits
comfortably in ear canals.
Hypo-Allergenic material.
104
Qty
Code
1 pair
1 box (200 pair)
95EAR2
95EAR1
415-824-4300
SAFETY EQUIPMENT
EAR PLUGS WITH CORD
• Disposable ear plug with cord.
Qty
Code
• Fits comfortably in ear canal.
1 pair
1 case (100 pair)
95EAR4
95EAR3
Qty
Code
• Hypo allergenic material.
QUIET MUFF 24
QM24 (NRR 24) is a three position,
ultra-lightweight ear muff. Weighs
only 6 oz. for comfort during
prolonged usage. The high visibility
red cups and black band add style
to an extremely functional ear muff.
Supplied with adjustable crown
strap for a secure fit when worn
behind the head or under the chin.
Low cost cushions are easily
removed for replacement.
EA
95EAR5
QUIET MUFF THUNDER 29
Qty
Thunder 29 (NRR 29) is fully
dialectric with extra long, padded
headband for comfortable fit.
Oversized vinyl cushions help
distribute pressure evenly around
the outer ear for maximum user
comfort. Replaceable and washable
soft foam ear cushions are ideal for
extended use.
EA
Code
95EAR6
LEATHER DRIVERS’ GLOVES
Code
Top grain cowhide, straight thumb,
gun cut, taped cuff and shirred
elastic for a snug fit.
ZGLOV1
LEATHER PALM GLOVES
Code
Split leather, striped cotton back,
straight thumb, clute and knit wrist.
415-824-4300
ZGLOV2
105
SAFETY EQUIPMENT
COTTON GLOVES
Code
Large cotton with straight thumb,
clute cut, navy knit wrist.
ZGLOV3
STRING KNIT/
RUBBER COATED GLOVE
Code
• Stretchable poly/cotton blend.
ZGLOV4
• Breathable back.
• Rubberized palm for excellent
grip.
• Knit wrist seals out dirt.
DOUBLE PALM GLOVE
Code
Front, back & cuff heather. Double
leather palm patch reinforced.
ZGLOV5
VINYL DISPOSABLE GLOVES
• Fits either hand.
Size
Code
• For industrial use only.
Extra Large
ZGLOV7
Size
Code
• Non sterile.
ATLAS NITRILE TOUGH GLOVES
These gloves are the result of years
of research and development. Like
all ATLAS® palm dipped gloves,
they are ergonomically shaped, knit
without seams, flexible,
comfortable, extremely durable and
machine washable.
Medium
Large
106
ZGLOV10
ZGLOV11
415-824-4300
SAFETY EQUIPMENT
PVC COATED GLOVES
Code
Large neoprene coated, set-in wing
thumb with red knit wrist, Protects
against cuts, abrasions, oil,
sunlight, grease, chemicals, acids
and caustics.
ZGLOV6
YOUNGSTOWN GENERAL
UTILITY PLUS GLOVES
Unparalleled durability and value.
The General Utility Plus is a
versitile, full-finger work glove made
for adrasive conditions.
Recommended for heavy duty work,
construction and landscaping.
YOUNGSTOWN GENERAL
UTILITY PLUS GLOVES
Unparalleled durability and value.
The Carpenter Plus shortened on
the middle and index finger and
thumb to provide fingertip dexterity.
Recommended for carpentry and
assembly.
Size
Code
Large
ZGLOV8
Size
Code
Large
ZGLOV9
Size
Code
Large
XLarge
XXLarge
ZSUIT1
ZSUIT2
ZSUIT3
QUALITY IMPORTS RAIN SUIT
Three piece heavy duty. PVC,
double laminated with fiber
reinforced, jacket has detachable
hood, double fly snap and zip front
closure, ventilated cape back, two
side pockets with snap down flaps,
adjustable snaps on cuffs and
drawstring waist. Bib overalls have
snap-fly suspenders and adjustable
snap cuffs. 100% water-proof, high
visibility yellow color. Made in China.
415-824-4300
107
SAFETY EQUIPMENT
RAIN BOOTS
General purpose PVC boots. Black
cleated sole. Reinforced molded
shank for extra support.
COMMERCIAL/INDUSTRIAL
FIRST AID KITS
Size
Code
7”
8”
9”
10”
12”
ZBOT07
ZBOT08
ZBOT09
ZBOT10
ZBOT12
Size
Qty
61⁄2”x91⁄2”x23⁄4”
Neat, orderly interior packaging is
standard equipment in every Pac-Kit
Commercial/Industrial First Aid Kit.
Code
95SKIT
EA
Contents:
Adhesive Strips
Large Wound Dressing
Gauze Pads
Gauze Bandage, 4”
Eye Pads
Adhesive Taps, 1⁄2"x# yds.
50
1
5 (4”)
1
2
Triangular Bandage
Elastic Bandage
Antiseptic Towelettes
SAFETY FENCE
A low cost polymer grid developed
for temporary installations as
fencing or traffic/safety control in
and around construction sites, land
fills and work areas. 13⁄8"x 11⁄4" grid.
1
1
—
10
First Aid/Burn Cream, 1⁄2 oz.
Aspirin
Eye Flush, 1 oz.
Eye Flush, 4 oz.
Cold Pack
Latex Exam Gloves
Scissors
Forceps
First Aid Instructions
1
10
1
—
1
2 PR
1
1
1
Size
Color
Code
4’x 100’
Orange
ZTFEN2
CAUTION TAPE
High visibility caution tape with
color fast ink. Weather-proof for
harsh out door conditions.
108
Size
Code
3”x 1000’
ZTAPEC
415-824-4300
SUNDRIES
CHALK LINE REEL
Universal hook has been designed
to endure the rigors of everyday
use. Can be used as a plumb bob.
Size
Type
Qty
Code
100’
100’
Stanley chalk reel
Irwin chalk reel
EA
HW0016
HW0019
Size
Color
Qty
Code
5#
5#
8OZ
8OZ
Red
Blue
Red
Blue
EA
HW0009
HW0010
HW0013
HW0015
Size
Color
Qty
Code
260’
Yellow
Lime/Green
Pink
Orange
EA
HW0020
HW0021
HW0022
HW0023
Color
Qty
Code
Yellow
Red
Blue
Green
EA
ZA1000
ZA1001
ZA1002
ZA1003
STRAIT LINE CHALK
Chalk refill, micro fine for more
marking power. Packaged in plastic
containers.
NYLON MASON LINE
Twisted nylon twine is not damaged
by cement or alkalines. Will not rot
of mildew and may be stored wet.
DIXON CRAYON
Non-toxic, waterproof marking
crayons for use on oily, slick, wet,
cold and dry surfaces. 41⁄2!
hexagonal crayons.
FLIP STICK
CRAYON/LUMBER PENCIL
Combines crayon & lumber pencil in
one handy unit.
415-824-4300
109
Color
Qty
Code
Yellow
Red
Blue
Green
EA
ZA1004
ZA1005
ZA1006
ZA1007
SUNDRIES
LUMBER PENCILS
Qty
Medium Lead
Code
ZA1008
EA
ELASTIC STRETCH CORDS
• High quality cord, extra heavy
vinyl, coated hooks, quality rubber
is covered with multicolor braid.
Size
Code
16”
18”
24”
36”
ZCOR16
ZCOR18
ZCOR24
ZCOR36
MAX STRAPS
Color
Length
Code
• The industry standard for
securing loads on contractors
vehicles.
Black
Red
Yellow
Green
Blue
Purple
Black
2’
4’
6’
8’
10’
12’
20’
ZCST02
ZCST04
ZCST06
ZCST08
ZCST10
ZCST12
ZCST20
Size
Qty
Code
EA
9TWINE
• 1” polyproylene webbing 750lb
test.
• Rust proof, zinc coated cam
buckle.
ALL PURPOSE POLY ROPE
Lightweight, all purpose rope is
resistant to rot, mildew, petroleum
products and most chemicals.
3⁄8”x 50’
WORK HORSE
Qty
• Holds up to 1,000 lbs per pair.
• Push to open for easy set-up.
• Folds flat for easy storage
and transport.
EA
110
Code
ZCLAMPA
415-824-4300
SUNDRIES
VINYL ELECTRICAL TAPE
Size
3⁄4”x 60’
roll
Color
Qty
Code
Black
EA
95TAPEE
Color
Qty
Code
Red
EA
95TAPER
Qty
Code
EA
94TP06
94TP10
94TP14
94TP20
Qty
Code
EA
95TAPE
Qty
Code
EA
ZTAPEC
RED VINYL TAPE
Size
2”x 60’ roll
3M BLUE PAINTERS PROFESSIONAL
MASKING TAPE
Size
Painters professional masking tape
designed for general, all purpose
use. Good tensile strength and
adhesion.
1”x 60YD
11⁄2”x 60YD
2”x 60YD
3⁄4”x 60YD
DUCT TAPE–ALL PURPOSE
Size
• Poly-coated, cotton-cloth back.
• Strong, tough.
• Indoor or outdoor use.
2”x 60YD
CAUTION TAPE
Size
High visibility caution tape with
color fast ink, weather-proof for
harsh out door conditions.
3”x1000’
DRYWALL (JOINT) TAPE
Self-adhesive, fiberglass mesh.
Repairs cracks and seals holes.
415-824-4300
111
Size
Qty
Code
300”
EA
94TP30
SUNDRIES
FLEXIBLE METAL CORNER TAPE
Specialized drywall tape ideal for
use on cathedral ceilings, arch
ways, bay windows, etc. Versatile
enough to use where standard
corner beads are impractical. Two
galvanized-steel strips assure a
perfect, reinforced corner at
virtually any angle. No special
adhesive required just apply with
regular drywall joint compound.
DRYWALL TAPE
21⁄6" wide rolls in lengths of 250!
and 500!. Special long cellulose
fiber paper, buffed and creased to
meet professional standards.
DUROCK MESH TAPE
Size
Qty
Code
100’
EA
94TP60
Size
Qty
Code
250’
500’
EA
94TP25
94TP50
Size
Qty
Code
EA
94TPDR
2”x 50’
HANDVAC DRYWALL SANDER
Size
Code
35⁄16”x 11”
94TP70
• Universal swivel head.
Size
Code
• Uniform sanding pressure can be
applied even to the hardest to
reach places.
35⁄16”x 11”
94TP72
• Dustless drywall sanding is now
a reality.
• Designed for use with a standard
wet/dry shop vac.
• Captures the finest dust particles
as the wall is being sanded.
POLE SANDER
• Designed for use with any
standard accessory pole.
112
415-824-4300
SUNDRIES
HAND SANDER
• Allows for uniform pressure to
be applied when sanding dry
wall joints.
Size
Code
35⁄16”x 11”
94TP74
TAPING MUD
Size
Type
Qty
Code
1QT
1GAL
4GAL
4GAL
4GAL
18#
18#
18#
Waterproof
All Purpose
All Purpose
Topping
Easy San Plus 3
Hot Mud 20min
Hot Mud 45min
Hot Mud 90min
EA
94MUD1
94MUD2
94MUD3
94MUD4
94MUD5
94MUD6
94MUD7
94MUD8
Qty
Code
EA
94TP18
MUD PANS
Size
Fully tapered sides and ends reduce
weight.
6”x18”
TAPING KNIFE
Taping knife, Feature a one piece
steel blade mounting, welded to a
blue clock spring steel blade. One
piece folded mounting which is
stronger than conventional steel
knives. Proper blade flex is
guaranteed for effortless taping.
FLEXIBLE PUTTY KNIFE
Tempered steel blade securely
fastened to handle. Full, flexible
taper ground blade.
BENT PUTTY KNIFE
DRYWALL JOINT KNIFE
• High carbon steel
Qty
8”
10”
EA
Size
Qty
11⁄2”
2”
41⁄2”
EA
Size
Qty
14
1⁄”
EA
Size
Qty
6”
• Hammer Head® end for
setting nails
415-824-4300
Size
113
EA
Code
94TK08
94TK10
Code
94TK14
94TK20
94TK04
Code
94TK12
Code
94TK06
SUNDRIES
BONDO SPREADER
SCRAPERS
Finest quality, replaceable blades,
makes tough jobs easy.
Qty
Code
3EA
94TK40
Size
Qty
Code
11⁄2”
3”
EA
Replacement Blade
Qty
1 1⁄2”
3”
EA
Size
Qty
94TK21
94TK26
Code
94TK24
94TK28
RAZOR BLADE SCRAPER
Uses single edge razor blades. Paint
scraper, 4" length, with changeable
retractable blades. Individually
carded with five replacement
blades.
EA
Single Edge
Razor Blades
Qty
5EA
Code
94TK30
Code
94TK34
UTILITY KNIFE
Code
• Retractable blade.
ZA1015
• Safety 3 position blade exposure.
• Heavy duty zinc die cast
construction.
SWIVEL-LOCK® RETRACTABLE
UTILITY KNIFE
Code
• Handle swivels open for quick
easy blade change, no need for a
screwdriver.
ZA1010
• Interlocking nose, aluminum body
for maximum durability.
• Large, comfortable design.
• 3 blades in handle.
STANLEY REPLACEMENT
UTILITY KNIFE BLADES
Blades are interchangeable with
most other makes of utility knives.
114
Qty
Code
5EA
100EA
HW0092
HW0093
415-824-4300
SUNDRIES
THROW AWAY BRUSH
White natural bristles with
unfinished wood handles. Ideal for
applying glue, sweeping chips off
machinery and single-use
applications.
Size
Qty
Code
2”
21⁄2”
3”
4”
EA
TB2000
TB2400
TB3000
TB4000
LATEX BRUSH
Size
Qty
Code
A blend of white Chinese bristle
and brown polyester filaments
with wood handles. Designed for
all latex-based paint.
11⁄2”
EA
PB1400
PB2000
PB3000
PB4000
Qty
Code
EA
PB5000
Qty
Code
EA
PB6014
PB6020
PB6024
PB6030
Qty
Code
EA
PB1001
PB1002
PB1003
PB1004
Size
Qty
Code
12”
EA
2”
3”
4”
Size
11⁄2”
PURDY XL OIL/LATEX
PROFESSIONAL BRUSHES
Angled
Size
Nylon and polyester blend. Highly
recommended for both interior and
exterior painting projects.
11⁄2”
2”
21⁄2”
3”
Angled
FOAM PAINT BRUSH
Size
Easy to use disposable foam brush.
Use to apply all types of paints,
stains, varnished and urethanes to
smooth surface and corners.
1”
2”
3”
4”
COUNTER BRUSH
Thicker and longer than the
competition. Exploded tip bristels
for picking up the finest wood dust.
415-824-4300
115
PB600
SUNDRIES
PAINT MIXER
Size
Power driven mixer 3” impeller
31⁄4” (For 3/8” power drills)
• For use with electric drill.
• Mix drywall compound,
driveway sealer, paint,
waterproofing coating, etc.
• Corrosion resistance MIXER
• Easy clean-up
PAINT
Code
PTM314
Size
4”
Code
(For 1/2” power drills)
PTM400
PAINT MIXER
WHIZZ FINE FINISHING
Premium Sponge: small celled
seamless sponge for minimal
bubbling and stippling with alkyd
enamel varnishes and urethane
rounded edges eliminate laps.
Size
Qty
Code
Fine Finish Tool
12” handle w/4” roller
1 EA
PD57600
4” replacement roller
6” replacement roller
2 EA
2 EA
PD54060
PD54064
4” prem. sponge pan set
4” ps, 12"handle, 6"x14" pan
1 EA
PD57614
9" BIRD CAGE PAINT ROLLER
Qty
• Heavy gauge chrome plated steel
frame.
• Five-wire chrome plated steel cage.
• Convex center wires to prevent
cover from slipping.
• Rim nylon end caps to secure
paint cover.
• Comfort grip 6" handles internally
threaded for extension pole.
EA
Code
PF0009
BRONZE WOOL
• Flexible wool abrasive that is
great for stripping, sanding,
smoothing and polishing.
Qty
Texture
Code
EA
3/PK
3/PK
EA 3/PK
Fine
Medium
Coarse
HW5000
HW5001
HW5002
Qty
Texture
Code
#1 Medium
#0 Fine
#00 Very Fine
#000 X Fine
#0000 Super Fine
HW5005
HW5010
HW5020
HW5030
HW5040
EA
• Unlike steel wool—which can
leave behind small fibers that
corrode and discolor wood—
bronze wool resists shredding,
rust, and corrosion.
STEEL WOOL
8/PK
8/PK
EA 8/PK
EA 8/PK
EA 8/PK
EA
EA
116
415-824-4300
SUNDRIES
9” ROLLER COVERS
SYNTHETIC FIBERS
• For use with all paints and
coatings on most surfaces.
• 3⁄8” thick nylon.
• Plastic core.
11” PAINT ROLLER TRAY
744; Paint roller tray, 11” bright
metal.
PLASTIC 11” ROLLER
TRAY LINER
Texture
Qty
Code
Smooth
Medium
Rough
EA
PR0001
PR0002
PR0003
Qty
Code
EA
PT0009
Qty
Code
EA
PT0010
SCRUBS HAND WIPES
When hands are really soiled and
there isn’t any soap, and there isn’t
any water. No rinsing, no drying, no
residue.
Code
95SCRB
ORANGE GOOP HAND CLEANER
• Fresno orange scent in a tough,
natural liquid hand cleaner.
• No harsh solvents.
415-824-4300
117
Size
Qty
Code
5oz
EA
95SCRO
SUNDRIES
WHITE RAGS
• Wiping and polishing cloth rags.
Size
Code
5#
95SRAG1
PUSH BROOMS
• Coarse bristle
• Medium/fine bristle
Size
Desc.
Qty.
Code
18”
24”
18”
24”
Coarse
Coarse
Medium/Fine
Medium/Fine
Janitor’s Broom
Deck Scrub Brush
EA
EA
ZPUSH1
ZPUSH2
ZPUSH3
ZPUSH4
ZPUSH6
ZPUSH7
Qty.
Code
EA
ZPAN12
ZPAN18
EA
EA
EA
EA
DUST PANS
• Utility
Size
• Yard
12 3/4”
18”
SWEEPING COMPOUND
Recommended use on unfinished
floors for oil, sand, and sawdust.
118
EA
Size
Code
50 lb.
ZPUSH50
415-824-4300
SUNDRIES
PAINT POURER
Fits any standard US gallon or 4
liter can. “No-drip” spout for
cleaning and easy pouring.
Size
Qty
Code
1GAL
EA
PA2000
Size
Qty
Code
2GAL
5GAL
EA
PA1000
PA5000
PAINT BUCKETS
White plastic utility bucket for paint
mixing and more.
EA
BUCKET CADDY
• 32 Pockets.
Code
• 12 inside, 20 outside.
ZTOL90
• Made of 600 Denier polyester.
• Fits most 5 gal buckets.
PLASTIC SHEETING
Polyethelene construction film.
415-824-4300
119
4 Mil (clear)
Code
10 x 50
12 x 50
20 x 50
20 x 100
91P105
91P125
91P205
91P210
6 Mil (black)
Code
10 x 50
12 x 50
20 x 50
91Q105
91Q125
91Q205
SUNDRIES
WOOD CHISELS
Size
• Extra long handles with crowned
strike cap.
• High carbon, heat tempered blade.
• Precision ground cutting edge.
• Blade tip guard (with sharpening
guide) provides blade protection
and safety.
• Width identification on blades.
• Carded.
1⁄4”
1”
11⁄4”
11⁄2”
2”
Size
Code
24”
36”
48”
72”
ZA1050
ZA1055
ZA1060
ZA1065
3⁄8”
1⁄2”
5⁄8”
3⁄4”
FLUORESCENT BOX ALUMINUM LEVELS
WITH HANDHOLDS
Most durable level on the market.
• Extra thick, ribbed wall aluminum box beam.
• Powder coated, baked finish in high-visible
safety yellow.
• Easy to clean, resistant to scratches.
• Solid acrylic barrel shaped vials, glare
resistant setting.
• Magnified horizontal vial visible in darkness.
• Shock absorbing end caps.
Code
ZA1020
ZA1021
ZA1022
ZA1023
ZA1024
ZA1025
ZA1026
ZA1027
ZA1028
TORPEDO LEVELS
•
•
•
•
•
Code
Durable aluminum cast frame.
Vials replaceable in seconds.
Ideal for pipe and conduit work.
Tinted 360º vials for easy reading.
Magnetic strip allows free hand
operation on metal surfaces.
ZA1075
STANLEY ALUMINUM LINE LEVEL
Code
Special hooks hold to line—allows
level to slide freely for easy
positioning. Bottom flat for
surface leveling.
ZA1070
120
415-824-4300
HAND TOOLS
COMBINATION SQUARE
• Die cast metal handle.
• Solid brass knobs.
• Dial individually regulated to
ensure accuracy.
• Coated blade resists rust.
• Inside and outside try square.
• Unique high visibility black blade
with deep etchings filled with
yellow paint.
Size
Code
12”
16”
ZA1080
ZA1081
6" QUICK SQUARE® TOOL
Code
This layout tool works as a rafter
square, tri square, protractor and
power saw guide. It‘s heavy duty
cycolac body is lightweight and
compact to fit conveniently into
pocket of tool belt.
ZA1085
STEEL RAFTER SQUARES
Code
• High strength stainless steel for
durability and long life.
• Individually inspected for accuracy.
• Deep graduations are filled with
yellow paint for superior readability.
• Surface protected to resist corrosion.
• Tell-sell sleeve.
ZA1090
STAIR GAUGE SET
Code
• Attaches easily to all metal
squares.
• Solid brass.
• Fast and uniform layout in repetitive
work, including angle cuts on
rafters and stair stringers.
ZA1104
STANLEY WOOD T BEVEL
Code
Hardwood handle with recessed
grip area, inlaid brass tips and
secondary locking device.
415-824-4300
ZA1095
121
HAND TOOLS
BRASS PLUMB BOB
Replaceable Nickel Plated Tips.
Size
Code
Cast in one piece. Cap permits
attachment of cord. Hardened
replaceable tips. Individually carded.
8OZ
16OZ
ZA1101
ZA1102
Size
Code
10”
ZA1120
PROFESSIONAL DOVETAIL SAW
Cuts a true, smooth and narrow
kerf. Comfortably designed
hardwood handle provides positive
grip. Fine cutting 13 point blade.
Reversible and flush cutting.
COMPASS SAWS
Code
• High grade tempered steel blade.
• Induction hardened teeth stay
sharp longer than non-hardened
teeth.
• Teeth precision set and sharpened
for fast and smooth cutting.
ZA1125
STANLEY COPING SAWS
Handle of rich, walnut stained
hardwood. Blades are high carbon
steel—hardened and tempered to
give clean cutting action.
Qty
Code
6/box
ZA1140
STANLEY COPING SAW BLADES
High quality spring steel. 63⁄8"
length, five blades per card.
122
Size
Type
Qty
Code
63⁄8”
20th x hard
10th
20th
32th
15th
5EA
ZA1145
ZA1146
ZA1147
ZA1148
ZA1149
415-824-4300
HAND TOOLS
HIGH TENSION HACKSAW
Qty
• Rugged design for heavy duty use.
• Fully adjustable tension–holds
blade at up to 32,000PSI, which
provides longer blade life and fast,
accurate cuts.
Replacement Blade
12 x 18th
12 x 24th
12 x 32th
• Blade storage in frame.
• Quick release blade changing
mechanism in handle, maintains
tension setting.
Qty
EA
Code
ZA1130
Code
ZA1133
ZA1132
ZA1131
• Tension guide on handle lever.
• Blade extended out nose of frame
can be locked into place for tight
corners work.
• Tell-sell sleeve.
JACK SAW
Production hardened to preserve
sharpness. Cutting size is 3 to 5
times longer than standard teeth.
JAPANESE HARDWOOD
SAW #651
Size
Code
15”x8pt
20”x8pt
ZA1122
ZA1123
Size
240mm
JAPANESE BACK SAW
RUBBER GRIP #3072
Size
240mm
415-824-4300
123
Description
Code
Saw
Replacement Blade
ZA1114
ZA1116
Description
Code
Saw
Replacement Blade
ZA1115
ZA1117
HAND TOOLS
SHARK SAW
DOVETAIL AND DETAIL SAW
Size
Code
• Dowel/dovetail/detail saw.
61/2”
ZA1118
• Great for fine craftwork.
• Flush cut and any detail work.
• Simple push button release on
handle allows for compact
storage.
STANLEY NAIL SET PACK
Code
58-230; Assortment of 3 Nail Sets.
One each of 1⁄32!, 2⁄32!, 3⁄32!.
Individually carded.
ZA1113
STANLEY NAIL SETS
Rounded knurled body. Alloy steel
hardened and tempered. Tips are
cupped and chamfered. Black
phosphate finish. 5⁄16! square head
prevents rolling. Individually skin
carded. 4! O/A length.
Tip
Qty
1⁄32!
EA
2⁄32!
3⁄32!
Code
ZA1110
ZA1111
ZA1112
WOOD MITER BOX
Code
Hard rock maple wood miter box.
Has a 45º face angle that permits
cutting of wide mouldings up to
35⁄8!. Front lip prevents slipping.
ZA1220
COPY CAT GAUGE
Code
ZA1240
WORK HORSE
Qty
• Holds up to 1,000 lbs per pair.
• Push to open for easy set-up.
• Folds flat for easy storage
and transport.
EA
124
Code
ZCLAMPA
415-824-4300
HAND TOOLS
STANLEY® HEAVY DUTY
POWERLOCK® TAPE RULES
Size
• Heavy duty spring, blade and hood
system.
• Thicker blade, longer standout.
• Larger spring.
• Three rivet hooks.
• Improved blade readability with
high contrast color.
• Heavy-duty mylar “blanket-wrap”
coating extends blade life up to
ten times longer.
Code
3⁄4”x16’
STANLEY® HEAVY-DUTY
STEEL LONG TAPES
• Heavy-duty mylar “blanket-wrap”
coating extends blade life up to
ten times longer.
• Extra strong, thicker blade.
• Impact resistant safety yellow
case.
• Stainless steel roller cage for
smooth blade action.
• Strong corrosion-resistant two
position hook.
1”x25’
1”x30’
ZTAPE3
ZTAPE4
ZTAPE5
Size
Code
3⁄8”x 50’
ZTAPE6
ZTAPE7
3⁄8”x 100’
PRO TAPE MEASURE
25’ 1” Blade 3 Rivit Tip
Great rubber outer with easy read
blade. Best quality with side break.
Size
1” X 25’
Qty
Code
EA
ZTAPE8
WALLOARD SQUARE
Size
• High grade aluminum alloy.
• Black thermo-bonded gradiations.
• Thermally fused, powder paint
finish.
YARDSTICK/STRAIGHT EDGE
• High grade special aluminum alloy.
• Light weight and strong.
• Black thermo-bonded gradiations.
415-824-4300
125
Qty.
Code
47 /8”
EA
ZA1096
Size
Qty
Code
36”
48”
72”
EA
ZA1097
ZA1098
ZA1099
7
EA
EA
HAND TOOLS
STANLEY INTELLISENSOR
STUD AND JOIST LOCATOR
Qty
• Scanning technology accurately
detects and locates studs and
joists behind plywood and
drywall.
EA
Code
ZA1030
• Fully automatic calibration.
• Audio/visual detection.
• Easy to use instructions.
STUD SEEKER™
• Locates wood or metal studs in
sheetrock™, paneling, plywood,
and flooring up to 3/4! thick.
Qty.
EA
Code
ZA1035
• Compact size easily fits in shirt
pocket.
• Durable ABS housing; can be
thrown in tool box.
QUINT® MEASURING SYSTEMS
SIZE
7”
12”
18”
23”
30”
36”
48”
60”
96”
The Original True Angle™.
When you are away from a drafting
table or computer, you may still
calculate difficult angles quickly and
easily.
• Adjustable 360º protractor.
• Comes in various lengths.
• Defines, measures and makes
angles in seconds.
Value Pack 7”–12”
CODE
ZA1307
ZA1312
ZA1318
ZA1323
ZA1330
ZA1336
ZA1348
ZA1360
ZA1396
Code
ZA1399
Accessory Dial
Code
ZA1304
CHECK POINT LASER LEVEL
Code
Level, align and plumb with
unparalleled ease and accuracy
and speed.
ZTOOLA
Easily squares at 45º. Anodized
planted for protection and durability.
Threaded mount for use as a transit.
Level is accurate and aligned from all
• Manufactured to aircraft standards
planes of reference. Field adjustable
in materials and plating.
for windage and elevation. Vertical,
• Water and shock resistant.
horizontal and 45º vials.
• Field adjustable.
• Precision made in the USA.
• Accurate to .250 at 30"/10 meters.
• Designed and sized for portability. • Laser gunsight technology.
Accessories
Magnetic base
Soft case
126
ZTOOLB
ZTOOLC
415-824-4300
HAND TOOLS
LED-LENSER TURBO TORCHES
Key Chain
Two German optoelectric engineers,
Rainer and Harold Opolka, first designed
these revolutionary NEW lighting
instruments in the late 1990’s. Seven
years and 14 patents later, LED-Lenser
“Turbo Torches” are available for the
consumer market from Coast. By
employing State-of-the-art computer chip
technology, these unique lighting
instruments provide a higher level of
energy efficiency and greater brightness
than conventional lights.
Qty
Code
EA
ZA1999F
Qty
Code
EA
ZA1999G
V2 TRIPLEX
• 3 spot power beam.
• 100 hrs. of light without
a battery change.
• 3 Photon tube Reflectors.
• 3 Diode-charged systems.
• 5 7/16 in. length.
• Includes sheath.
STANLEY CONTRACTOR GRADE™
BLOCK PLANE
Qty
Cast iron bottom and sides are ground
perfectly flat and true. Fully adjustable
cutter rests at 21˚. Adjustable mouth
opening for course or fine work.
Comfortable finger grips on sides.
Replaceable.
EA
STANLEY CONTRACTOR GRADE™
LOW ANGLE PLANE
Qty
Fully adjustable mouth and cutter. Cutter
rests at 21˚ angle for end grain work.
Comfortable finger grips in sides. Bottom
and sides machined perfectly flat and
true. Repaceable cutter.
415-824-4300
EA
127
Length
Inches
mm
6
150
Length
Inches
mm
6
150
Cutter Width
Inches
mm
1
5⁄8
40
Cutter Width
Inches
mm
1 3⁄8
35
Code
ZA1017
Code
ZA1018
HAND TOOLS
VAUGHAN RIPPING HAMMER
STRAIGHT CLAW
Head
®
16 oz. “99” PRO-16
Available with either smooth or milled
face, this is a nicely proportioned
hammer for all-around use. Top quality,
white hickory handle is triple wedged.
Smooth
20 oz. “999” Framing
face, its superb balance and comfortable
grip make this hammer a favorite of
tradesmen. Top quality, white hickory
handle is triple wedged.
Head
24 oz. “505” Framing
face, this framing hammer sets the
industry standard for appearance and
balance. Top quality white hickory
handle is triple wedged.
Head
®
Smooth
Milled Face
Smooth
Milled Face
VAUGHAN’S VANADIUM
CLAW NAIL HAMMER
Head
Full polished head with octagon
neck and round face. Top quality,
white handles, triple wedged and
epoxy sealed for “Sure-Lock®”
handle tightness.
Smooth Curved Claw
Smooth Straight Claw
VAUGHAN CALIFORNIA FRAMER
Head
The Vaughan California Framer
combines features of two of our
most popular tools into a rugged,
heavy construction hammer. The
smoothly swept claws were
borrowed from our “999” Rip
Hammer, and the extra large striking
face, hatchet eye and sturdy handle
are a heritage of our Rigbuilder’s
Hatchet. The hatchet style handle is
best grade, second growth hickory.
To provide extra strength, the handle
has a large cross section where it
joins the fully polished head. Available
with either smooth or milled face.
Straight Handle-Milled
Curved Handle-Milled
VAUGHAN FIBERGLASS HAMMERS
Head
®
“Pro-16” Straight Claw
Vaughan’s patented, hollow-core
fiberglass handle provides better
balance and more effective shock
absorption than typical solid fiberglass
®
handles. Head “Sure-Lock ” wedged and
epoxy sealed. Slip-resistant grip,
contoured for comfort.
Straight
Smooth
Smooth
Milled
128
Weight
Length
Code
16 oz.
13”
ZW2001
Weight
Length
Code
20 oz.
20 oz.
16”
16”
ZW2005
ZW2010
Weight
Length
Code
24 oz.
24 oz.
17”
17”
ZW2015
ZW2020
Weight
Length
Code
13 oz.
16 oz.
12 /2”
13”
ZW2030
ZW2035
Weight
Length
Code
23 oz.
23 oz.
17”
17”
ZW2040
ZW2045
1
Weight
Length
Code
16 oz.
20 oz.
20 oz.
20 oz.
131/2”
14”
16”
16”
ZW2025
ZW2026
ZW2027
ZW2028
415-824-4300
HAND TOOLS
ALL STEEL RIPPING HAMMERS
Head
Forged one-piece solid steal
construction, eliminates loose heads.
Weight
Length
Code
16OZ
24OZ
ZW6000
ZW7000
DRYWALL HAMMERS
Forged one-piece solid steel
construction, eliminates loose heads.
Head
Weight
Length
16OZ
ESTWING NYLON-VINYL GRIP
FRAMING HAMMER
Head
• Straight claw
Smooth Face
Milled Face
DALLUGE STRAIGHT
CLAW HAMMER
Head
• Straight claw
• Mill/Magnetic nail holder
Mill/Magnetic Nail Holder
COMPO-CAST STANDARD
HEAD MODELS SOFT
FACE HAMMERS
Head
Weight
ZW5000
Weight
Length
Code
22 oz.
22 oz.
16”
16”
ZW6001
ZW6002
Weight
Length
Code
21 oz.
18”
ZW2050
Length
2LBS
3LBS
Non sparking soft face hammers of
UNICAST construction have no
exposed metal. The soft face yields,
doesn’t mar surfaces or equipment
and doesn’t absorb liquids.
HAND DRILLING HAMMER
Head
Forged high carbon steel head. Fully
heat treated and tempered. 3LBS,
handle length 101⁄4!.
Code
Code
ZW8010
ZW8012
Weight
Length
Code
3lbs
4lbs
1
10 /4”
12”
ZW8025
ZW8120
Weight
Length
Code
SLEDGE HAMMER
Head
Forged, high carbon steel heads.
Hardened and tempered. Faces
machined and polished. Selected
hickory handle.
415-824-4300
8lbs
12lbs
129
ZW8015
ZW8020
HAND TOOLS
RAILROAD PICK
PM5; 6LB railroad pick made of drop
forged high carbon steel, tempered for
strength and efficiency.
PROFESSIONAL SHOVEL
Dirt shovel, square point carbon steel
blade (97⁄16”x111⁄8!), forward turned
steps, heat treated steel handle,
power collar reinforces the socket
and handle attachment.
Description
Code
Head
Handle
ZA2010
ZA2011
Style
Code
Round Point
Square Point
ZA2000
ZA2001
POST HOLE DIGGER
Code
28004(33); Professional Hercules
pattern, designed for hard soils. High
carbon steel blades, 61⁄2” point
spread, blade stops. 91⁄2”x 61⁄2” blade
size, 4’ handle.
ZA2005
REINFORCED GARDEN HOSE
Three-ply construction consists of
vinyl tube, tire cord reinforcing, clear
cover for good pressure capacity and
flexibility. Includes solid brass
couplings and attractive white stripe.
130
Size
Code
5⁄8”x 50’
ZA2016
415-824-4300
HAND TOOLS
HOSE NOZZLE
Code
Heavy-duty brass hose nozzle.
ZA2018
HEAVY-DUTY POLY CLAD
AQUA GUN
Code
Heavy-duty Aqua Gun. Threaded
adapter and soft poly clad body.
Insulation from hot or cold water.
Solid brass system and spray
adjustment knob. Cushioned hand
grip for comfort. Locking clip holds
spray in any pattern.
ZA2020
HEAVY DUTY CROWBAR
GORILLA BAR
RIPPING BAR WITH SLOTTED CLAW
AND CHISEL END
Goose neck pattern. High carbon
steel for extra strength; chisel and
beveled. Claw and chisel end polished,
claw slotted.
NAIL PULLERS
• Super quality.
• Drop forged chrome vanadium.
• Flat I-bar construction.
Size
Code
18”
24”
36”
ZA1225
ZA1226
ZA1227
Size
Code
24”
36”
ZA1223
ZA1224
Size
Code
12”
14”
ZA1243
ZA1245
• Pulls nails easily even after
heads snap.
91⁄2” TRIM BAR
Size
Corrosion resistant coating.
Electrocoated high carbon steel;
hardened and tempered. Ground
scraping ends. Nail Slot.
415-824-4300
91⁄2””
131
.
Code
ZTOOL2
HAND TOOLS
PRY BAR
• Made with high quality carbon steel
and the thinnest blade available on
the market.
• Will pry into any tight spot with
ease and less damage to wall and
molding surface.
PRY BAR
Size
Code
8”
10”
ZA1246
ZA1247
Size
Code
18”
ZA1231
15” SUPERBAR®
Code
Forged and spring tempered.
Polished rocker head for
greater leverage.
ZTOOL1
AMERICAN TOOL™ VISE GRIP
LOCKING C-CLAMPS
Made of high grade alloy steel. Heat
treated for durability and finished in
bright nickel-plating. Adjusts in
seconds, regular tip ideal for
clamping wood, plastic and metal.
AMERICAN TOOL™ VISE GRIP
LOCKING PLIERS
Long nose locking pliers with wire
cutter. Made of high-grade alloy
steel. Heat treated for durability and
finished in bright nickel-plating.
AMERICAN TOOL™ VISE
GRIP LOCKING PLIERS
Curved jaw locking pliers with wire
cutter. Made of high-grade alloy
steel. Heat treated for durability and
finished in bright nickel-plating.
132
Size
Code
6”
11”
ZA1180
ZA1182
Size
Code
4”
6”
ZA1184
ZA1186
Size
Code
5”
7”
10”
ZA1188
ZA1190
ZA1196
415-824-4300
HAND TOOLS
AMERICAN TOOL™ VISE
GRIP LOCKING PLIERS
Straight jaw locking pliers. Made of
high grade alloy steel. Heat treated
for durability and finished in bright
nickel-plating.
AMERICAN TOOL™ QUICK
GRIP BAR CLAMP
Quick grip bar clamp. high tech resin
construction is strong yet light weight.
One hand operation with positive
locking action to hold work tight.
Quick release trigger. Large pliable
pads won’t mar work.
Size
Code
7”
10”
ZA1192
ZA1194
Size
Code
6”
12”
18”
24”
36”
ZA1200
ZA1201
ZA1202
ZA1203
ZA1204
BESSY™ ANGLE CLAMP
WS-3; Bessy™ Angle Clamp is a
unique, versatile clamp that is
designed to always hold, fix, and align
material at a 90º angle. Rear jaw
swivels allowing one to hold different
material thicknesses always at 90º.
Ideal for many applications, i.e.
cabinet work and framing.
Size
Code
Small
Large
ZA1197
ZA1198
END CUTTING NIPPERS
Code
ZA1233
ADJUSTABLE CLAMP
“PONY” SPRINGS CLAMP
Open
Btwn Jaws
Use what ever “spring pressure” is
adequate, and especially where speed
is essential. Steel jaws, heavily plated
for smooth, bright finish and to prevent
rust. Heavy, tempered steel springs.
Protected handles and tip.
1”
2”
3”
4”
415-824-4300
133
O/A
Jaw Length
4”
6”
9”
?
Code
ZA1171
ZA1172
ZA1173
ZA1174
HAND TOOLS
ULMIA™ MITER CLAMP KIT
These unique and effective clamps
fill many varied clamping jobs that
would otherwise be almost
impossible to manage. The miter
rings (A–F) have sharp tips that draw
a mitre joint together. Mitre ring
capacity is the moulding size the ring
will clamp. These are strong rings, so
an application tool is necessary.
Woodworkers that have used these
swear by them!
Size
Code
3⁄8”– 31⁄2”
ZA3100
Style
Code
Left
Right
Straight
ZA1300
ZA1301
ZA1302
AVIATION SNIPS
Forged blades of high strength steel.
Designed for rapid outside trim and
clean cuts.
CHANNEL LOCK 9”
IRON WORKER PLIERS
Code
350S; 9” iron worker pliers. Heavyduty, precision made of special grade
dropped forged steel. Specially
designed for tying concrete
reinforcing bars. Coiled spring for
positive jaw opening. Perfectly
mated cutters are hand honed,
properly hardened to hold their edge.
Channel-Lock Blue® dipped plastic
comfort grips.
ZA1230
ALUMINIUM SNIPS
Size
Blades are easily replaced using only a
screwdriver. Made from top quality
materials. Designed for maximum
strength and minimum weight.
12”
14”
REPLACEMENT BLADES
FOR ALUMINIUM SNIPS
Size
12”
14”
134
QTY
Code
EA
EA
ZA1302A
ZA1302B
QTY
Code
EA
ZA1302C
ZA1302D
EA
415-824-4300
HAND TOOLS
CHANNEL LOCK
TONGUE AND GROOVE PLIERS
Size
Code
• Right angle teeth grip in all
directions.
10”
12”
ZA1250
ZA1253
CHANNEL LOCK
LONG NOSE PLIERS
Size
Code
• Cross hatching on jaws.
8 /2”
ZA1255
CHANNEL LOCK
LINEMEN’S PLIER
Size
Code
• High leverage rounded nose.
9”
ZA1260
Size
Code
7”
ZA1265
• Undercut tongue and groove won’t
slip.
• Permalock fastener eliminates nut
and bolt failure.
1
• Perfectly mated cutter heat
treated to hold its edge.
• Polishes high carbon drop forged
steel.
• Perfectly matted cutter, heat
treated to hold its edge.
• Useful crushing area.
CHANNEL LOCK
CUTTING PLIER
• Perfectly mated cutter heat treated
to hold its edge.
• Polished high carbon drop forged
steel.
b
4-IN-1 RASP
Code
22-100; Blade manufactured from high
carbon file steel. 4-way for different
cutting surfaces. One side offers a flat
rasp and double cut file. The other
side offers a half round rasp and
double cut 8” length.
415-824-4300
ZA1232
135
HAND TOOLS
EKLIND FOLD-UP HEX KEY SETS
Produced from 8650 chrome nickelalloy steel. Hex corners are sharp
and clean. Precision heat treated,
hardened, and tempered.
BEST WAY TOOLS 4-IN-1
SDR1; Two double end bits create
four screwdrivers in one handle.
Alloy steel bits made in the U.S.A.
#1 phillips and 3⁄16” slotted, #2
phillips and 5⁄16” slotted.
LUTZ 15-IN-1 RATCHET
SCREW DRIVER
The chamber allows for easy access
and storage of the bits. A slight turn
of the spring loaded bit selector
(knob) opens the chamber. The user
can remove or replace bits in only a
few seconds.
Style
Code
English
Metric
ZA1215
ZA1216
Style
Code
4-in-1
94SD41
Style
Code
15-in-1
94SD15
BOLT CUTTERS
Size
Heavy-duty with alloy steel blades,
drop forged beveled, hardened and
tempered. Precisely machined
adjustment screw for keeping cutting
edges aligned. Strong tubular handles
with non-slip rubber grips.
Code
ZA1228
ARROW STAPLE GUN TACKER
Code
T-50; Heavy-duty, all steel
construction, high carbon hardened
steel working parts, chrome finish,
jamproof mechanism, easy arrow
staples only of .050 w.
ZSTAPL
136
415-824-4300
HAND TOOLS
ARROW HAMMER TACKER
Code
T-50A; Heavy-duty, all steel
construction, high carbon, hardened
steel working parts,chrome finish,
impact-resistant, handle provides
non-slip grip.
ZSTAPP
ARROW T-50 STAPLES
For use in Arrow staplers T-50, T-55,
HT-50A, ET-50 and ETN-50.
Size
Qty
Code
5⁄16”
5,000EA
ZSTAP5
ZSTAP3
ZSTAP4
3⁄8”
1⁄2”
ADHESIVE SPREADER
Size
The best value in notched trowels.
Features a comfortable “float” style
polypropylene handle that has lots of
knuckle room and is guaranteed to
never work loose or break. The blade
is tempered steel that is lightweight,
durable and perfect for spreading
adhesive.
Code
11”x41⁄2” x 3⁄16” V
STEEL HAND SPREADER
ZW8172
Size
These spreaders are made of heavy
gauge steel with a rigidly crimp for
extra strength.
Code
63⁄8”x4” x 3⁄16” V
ZW8171
TROWELS
Size
• Professional quality spring steel.
4”x14”
4”x16”
WOOD FLOATS
Size
31/2”x16”
CURVED END OUTSIDE
CONCRETE EDGER
Size
Stainless steel edger, long wearing,
non rusting, turned up ends eliminate
digging into concrete making it easy
to use. 6” long, 3” wide, 1/4” radius,
3/8” lip.
415-824-4300
3 /2”x16”
1
137
Qty.
Code
EA
ZW8130
ZW8140
EA
Qty.
Code
EA
ZW8150
Qty.
Code
EA
ZW8170
HAND TOOLS/TOOL POUCHES AND HOLDERS
UNIVERSAL GROOVER
Has 6”x3” blade, cuts 1/2”x1/2”
groove, easy to clean.
Qty.
Code
EA
ZW8180
Qty.
Code
EA
ZW8160
POINTY TROWEL
• Deluxe steel trowel.
Size
• Polished steel blade.
2 /4”x5 /2”
3
1
• Varnished hardwood handle.
HEAVY-DUTY NAIL BAG
Code
With heavy-duty binding and stitching
genuine split leather cowhide.
ZTOL50
• One hammer holder.
• One auxiliary pocket.
• Wide belt tunnel.
• Double stitched and riveted.
HEAVY-DUTY CONSTRUCTION APRON
Code
Genuine split leather cowhide. Two
genuine leather nail bags. Two loop
hammer holders. Two tool pockets
and two pouches.
ZTOL80
• Full size bags.
• 8”x71⁄2!.
• Double stitched and riveted.
EXTRA CAPACITY
TAPE MEASURE HOLDER
Code
Fits all models of tape rules. Rule is
secured with back safety strap and
snap for easy one hand removal.
Push up pocket design holds
16"–20’ tape rules. Made of top
grain saddle leather.
ZTOL40
138
415-824-4300
TOOL POUCHES AND HOLDERS
SWIVEL HAMMER HOLDER
Code
With swivel safety bracket saddle
leather. Black color.
ZTOL10
• Heavy-duty genuine leather.
• New swivel clip hammer holder.
• Nickel-plated clip and hardware.
• Safety swivel fits all hammers.
HAMMER HOLDER
Overall size 41⁄4”x 61⁄2!, rust
resistant plated all steel, double
rivet reinforced, cradle loop all steel,
double rivet reinforced, cradle loop
design holds hammer in place.
23⁄4” belt slots. Made of top grain
saddle leather.
Code
ZTOL20
NYLON CONTROL TOOL BELT
LEATHER CONTROL TOOL BELT
Size
Code
small
D5100SM
large
D5100LG
Size
Code
small/medium
large/extra large
NYLON TOOL POUCH
D5101SM
D5101LG
Code
D5104
415-824-4300
139
TOOL POUCHES AND HOLDERS
NYLON NAIL POUCH
Code
D5106
NYLON WORK BELT
NYLON HAMMER HOLDER
Size
Code
small
D5115SM
large
D5115LG
Code
D5124
20” NYLON TOOL BAG
Code
D6100
140
415-824-4300
HANDRAIL BRACKETS
HANDRAIL BRACKETS
Style
IVES: Die cast plated. Polybagged
with screws.
SOLID BRASS
HANDRAIL BRACKETS
Solid cast brass handrail brackets.
Polished brass finish. Projection is 3!.
For 11⁄2” or 2”O.D. tubing. 3 screw holes.
Code
Brass
Bronze
Aluminum
White
Brass (solid)
Brass (solid, chrome plated)
Antique Brass
HD6-1
HD6-2
HD6-3
HD6-4
HD6-5
HD6-6
HD6-7
Style
Code
Curve Plain Flange
Curve Screw Flange
Flat
HD7-1
HD7-2
HD7-3
CAST HANDRAIL BRACKET
Style
Cast, sprayed finish. Projection to rail
center: 3!. Base diameter: 13⁄4!. supplied
with lag bolt for wall and wood screw
for rail.
Flat Aluminum
Flat Bronze
Round Gray
Round Bronze
Round Solid Brass/Bronze Finish
Round Smooth Solid Aluminum
Code
HD8-3
HD8-4
HD8-5
HD8-6
HD8-7
HD8-8
RAIL BRACKET HARDWARE
Style
Solid brass.
2” Brass Wall Flange
2” Brass Centerpost
2” Brass Endcap
415-824-4300
141
Code
HD12
HD13
HD14
EDGE BANDING/SHELVING PRODUCTS
EDGEMATE PRE-GLUED
EDGE BANDING
Style
Red Oak
White Birch
Maple
White Melamine
Real wood veneer in 250’ rolls.
Pre- glued. The continuous resin
impregnated backer actually
becomes part of the edge banding
to reduce splitting, tearing
and checking.
VIRUTEX EDGE TRIMMER
50’
250’
3VTAPN
3VTAPN
3VTAPN
3VTAPQ
3VTAPO
3VTAPO
3VTAPO
3VTAPP
Code
This tool simultaneously trims both
edges of vinyl or other press-on
edging. For panels 91⁄16” to 13⁄4” thick.
ZA1205
Replacement Blade
ZA1206
PONDEROSA PINE
SHELF BRACKETS
• Ready to finish.
• Each bracket individually
shrink wrapped.
Size
Code
6”x9”
73⁄4”x111⁄4”
93⁄4”x131⁄2”
E00690
E00711
E00913
Size
Code
3”x5”
5”x8”
7”x10”
E01350
E01580
E01710
• Includes wall-mount hardware.
PONDEROSA PINE
KEY HOLE CORBELS
• Ready to finish.
• Each Corbel assembled with
ready-mount keyhole plate.
• Individually shrink wrapped.
142
415-824-4300
SHELVING PRODUCTS
KV 80 SLOTTED STANDARD
Width: 5/8” Height:13/32
Use with the KV 180
Brackets shown below
SCREWS FOR
KV 80 SLOTTED STANDARDS
Color
Qty
Size
Code
White
EA
Zinc
EA
12”
24”
36”
48”
60”
72”
12”
24”
36”
48”
60”
72”
KVW8012
KVW8024
KVW8036
KVW8048
KVW8060
KVW8072
KVZ8012
KVZ8024
KVZ8036
KVZ8048
KVZ8060
KVZ8072
Sold in full bags only. 6 screw
and anchors per bag
Color
Qty
Code
White
Zinc
6 per bag
6 per bag
KVS800
KVS801
KV 180 STEEL BRACKETS
Width: 5/8” Height:13/32
Use with the KV 180
Brackets shown below
415-824-4300
143
Color
Qty
Size
Code
White
EA
Zinc
EA
6”
8”
10”
12”
14”
16”
6”
8”
10”
12”
14”
16”
20”
KVW1806
KVW1808
KVW1810
KVW1812
KVW1814
KVW1816
KVZ1806
KVZ1808
KVZ1810
KVZ1812
KVZ1814
KVZ1816
KVZ1820
SHELVING PRODUCTS
KV CLOSET TUBING
Size
Code
11⁄16”x 8’
11⁄16”x 10’
11⁄16”x 12’
EKV75OI
Flanged End Cap
EKV769C
KV STEEL CLOTHES ROD HARDWARE
Size
Style
Code
734C
735C
Chrome Closed End
Chrome Open End
EKV734C
EKV735C
CLOTHES POLE SOCKETS
Code
Clothes pole sockets
are designed to anchor
the end of standard
13⁄8” wooden clothes
pole. Made of
hardwood.
5600WR
SHELF BRACKET WITH
ADJUSTABLE CLOTHES
POLE SUPPORT
144
Style
Code
Non-Adjustable
9CPB00
Style
Code
Adjustable
9CPB01
415-824-4300
POWER TOOLS AND ACCESSORIES
DEWALT™ DW21002
3⁄8” (10MM)
HEAVY-DUTY DRILL
WITH KEYED CHUCK
Code
B0D100
• 4.0AMP, 0–2500RPM.
• Variable speed, reversing.
• 100% ball bearings.
• Built-in 2-way level.
• Contoured, textured grip handle.
• Includes chuck key and holder.
DEWALT™ DW21008
3⁄8” (10MM) HEAVY-DUTY
DRILL WITH KEYLESS CHUCK
Code
B0D106
• 4.0AMP, 0–2500RPM.
• Variable speed, reversing.
• Heavy-duty keyless chuck.
• Built-in 2-way level.
• Contoured, textured grip handle.
DEWALT™ DW120K
RIGHT ANGLE DRILL KIT
Code
B0D120
• 7.0AMP., 3 speed choices: 600RPM
straight line drilling, 400RPM or
900RPM with right angle head.
• Reversing.
• 100% ball and roller bearings.
• Die cast metal gear housing.
• Includes heavy-duty carrying
case, allen wrench, side handle,
chuck key and holder.
DEWALT™ DW124
JOIST & STUD DRILL
Code
B0D124
• 8.0AMP, 2 speed: 300RPM and 1200RPM.
• Reversing.
• 100% ball ans roller bearings.
• Mechanical clutch in low speed range.
• Die cast metal gear housing.
• Adjustable, 2-position side handle.
415-824-4300
145
DEWALT™ DW235G
1⁄2” - 7.8 AMP DRILL
Code
B0D235G
• 7.8AMP, 0-850RPM.
• Three Wire Grounded Cord/Plug.
• Two Finger Soft Grip Trigger
Switch.
• Metal Gear Housing.
• Helical Cut Steel, Heat Treated
Gears.
• 360˚ Side Handle.
DEWALT™ DW236
1⁄2” - 7.8 AMP KEYLESS DRILL
Code
B0D236
• 7.8AMP, 0-850RPM.
• Variable Speed, Reversing.
• Soft Grip Handle and Two Finger
Soft Grip Trigger Switch.
• Metal Gear Housing.
• Helical Cut Steel Heat
Treated Gears.
• 360˚ Side Handle.
• Keyless Chuck with Spindle Lock.
DEWALT™ DW272
HEAVY-DUTY VSR DRYWALL
SCREWDRIVER WITH
QUIET CLUTCH
Code
B0D272
• 6.5AMP, 0–4000RPM.
• Quiet clutch provides smooth.
non-ratcheting screwing and
longer life.
• Two finger, soft grip trigger switch.
• Set and forget nosepiece.
• Belt clip.
146
415-824-4300
DEWALT™ DW276
HEAVY-DUTY VSR
DECK/DRYWALL
SCREWDRIVER
Code
B0D276
• 6.2AMP, 0–2500RPM.
• Two finger, soft grip trigger
switch.
• Set and forget nosepiece.
• Belt clip.
• High torque output for deck
building.
DEWALT™ DW292
HEAVY-DUTY VSR
IMPACT WRENCH
Code
B0D292
• 345 ft-lbs of deliverable torque in
forward and reverse.
• 1/2" detent pin anvil.
• AC/DC forward/reverse rocking
switch.
• Soft grip handle for superior
ergonomics.
• Ball bearing construction for
increased durability
DEWALT™ DW304PK
9.0AMP HEAVY-DUTY
RECIPROCATING SAW KIT
Code
B0D304
• 4-position blade clamp allows for
flush cutting and increased
versatility
• Powerful 10.0 Amp motor
designed for heavy-duty
applications
• Lever-action keyless blade clamp
for quick and easy blade
changing
• 0-2,800 strokes per minute and
1-1/8" stroke length deliver fast
cutting
• Variable speed trigger provides
improved control
415-824-4300
147
DEWALT™ DW311K
HEAVY-DUTY
Code
B0D311
• 13 Amp motor delivers increased
power for heavy-duty
applications
• Orbital action delivers fast
cutting for wood applications
• 0-2,700 SPM and 1-1/8" stroke
length for fast and efficient
cutting
• Keyless stainless steel blade
clamp for quick and easy blade
changes and increased reliability
• Keyless adjustable shoe easily
adjusts depth of cut and extends
blade life
• Anti-slip comfort grip handle for
increased comfort
• Variable speed control dial
matches the correct speed for
the application for increased
versatility and control
DEWALT™ DW317K
HEAVY-DUTY TOP
HANDLE JIG SAW KIT
Code
B0D317
• Keyless blade clamp for fast, easy
blade installation and removal.
• 5.5A motor deliver powerful cuts in
the hardest materials.
• Variable speed delivers 0 - 3,100
strokes per minute for optimal
cutting speed.
• 4-position orbital action allows for
faster, more aggressive cuts in a
variety of materials.
Includes
• 2 cobalt steel blades.
• heavy-duty kit box.
• All metal gear case provides
superior durability on a professional
site.
• Shoe bevels 0 to 45 degrees for
beveled cuts
DEWALT™ DW378G
HEAVY-DUTY
7-1/4" HIGH TORQUE
FRAMING SAW
Code
BOD378
• Powerful 15.0AMP Motor.
• Lightweight At 13.0 lbs.
• High Strength Die Cast Shoe.
• High Torque Bevel Gear Drive.
• Built-In "Saw Hook."
• 50˚ Bevel Capacity.
• Carbide Saw Blade Included.
148
415-824-4300
DEWALT™ DW364
CIRCULAR SAW WITH
ELECTRIC BRAKE & REAR
PIVOT DEPTH OF CUT
ADJUSTMENT
Code
B0D364
• 15.0AMP, AC/DC, 5800RPM.
• High strength, aluminum alloy
shoe.
• 2 second electric break.
• Rear pivot depth of cut
adjustment.
• 100% ball and roller bearings,
helical gears.
• 50º bevel capacity.
• 20.0AMP AC/DC switch.
• Includes carbide blade and angled
blade wrench.
DEWALT™ DW821
HEAVY-DUTY 41⁄2! (115MM)
SMALL ANGLE GRINDER
Code
B0D821
• 9.0 AMP AC/DC 11,000 RPM motor
provides high-power in all 41/2”
griding applications.
• Keyless adjustable guard can be
adjusted without the use of tools.
• Rubber grip side handle provides
increased comfort and reduced
user felt vibration.
• Automatic turn-off brushes shut
down the tool when brushes need
to be changed to avoid tool
damage.
• Dust sealed sliding switch provides
long life in high dust ingestion.
• Matched wheel flanges allow for
use of common accessories.
Includes
• Grinding wheel
• Wrench
• Matched flanges
• Keyless adjustable guard
• 2 position rubber grip side handle
415-824-4300
149
DEWALT™ DW411K
HEAVY-DUTY 1⁄4 SHEET
PALM GRIP SANDER KIT
Code
B0D411
• Dust sealed switch for increased
durablility.
• Dual Plane counter-balanced lowvibration design reduces fatigue.
• 2.0AMP motor moves at 13,500OPM,
providing a superior finish.
• Sealed 100% ball-bearing
construction provides longer life.
Includes
• Kit box.
• Dust bag.
• Sandpaper punch.
DEWALT™ DW420
5” HEAVY-DUTY
RANDOM ORBIT PALM SANDER
Code
B0D420
• 2.0AMP.
• 12,000OPM.
• Accepts 5” 8-hold pressure
sensative adhesive paper.
• Controlled Finishing System™
keeps pad a controlled speed.
• 100% ball bearing construction.
• No dust.
• Dual-plane counter-balanced fan.
• Dust sealed switch.
DEWALT™ DW421
HEAVY-DUTY 5”
RANDOM ORBIT SANDER
Code
• Provides maximum sanding speed
for smooth finishes.
• Controlled Finishing System®
maintains pad speed and minimizes
gouging during start up.
• Dual-plane counter-balanced fan
reduces user fatigue.
• Dust-sealed switch prevents
contamination
Includes
• Sealed 100% ball-bearing
• Dust bag.
construction.
• Accepts 5”, 8-hole hook and loop™ • Vacuum adapter.
paper.
• Shop vacuum adapter for minimum
dust collection.
B0D421
150
415-824-4300
DEWALT™ DW433
HEAVY-DUTY 3”x 21”
VS BELT SANDER
• Powerful 8AMP motor aggressively
removes material in a variety of
applications.
• All-metal housing increases
durability during a drop.
• Three wheel design delivers lowest
center of gravity and longest 3"x21"
platen available.
• Innovative dust collection system is
20% more efficient than
conventional dust bags.
• Dust collection shut-off valve
eliminates dust stream toward
users when collector is not in use.
• Top exit cord allows for easy use of
overhead recipticles.
Code
B0D433
• Rubber grips reduce vibration.
Applications
• Aggressive sanding of flat surfaces.
• Paint removal from flat surfaces.
• Scribbing countertops.
Includes
• Belt sander.
• Sanding belt.
DEWALT™ DW25550
HEAVY-DUTY 19/16” SPLINE
ROTARY HAMMER KIT
• 11AMP motor delivers high output
and overload protection.
• Electronic variable speed allows the
user to control the speed of drilling
and chipping.
• 7.3 ft./lbs. of impact energy delivers
up to 42 percent faster drilling and
chipping applications than the
competition.
• Spline tool holder is compatible
with all spline bits.
• Rubber grip helps reduce the level
of vibration felt by the user when
operating the tool.
• Rear handle mount means less
bending over when using tool in
down drilling applications.
• Factory clutch helps reduce the
tool's reaction to embedded steel
when bits "lock up" while in
operation, preventing injury.
Code
B0D25550
• Modular construction allows
service technicians to repair tools
quickly, resulting in less downtime.
• 360° side handle allows user the
ability to position the side handle
wherever it best suits the
application.
Includes
• 360° side handle.
• Depth rod.
• Heavy-duty kit box.
DEWALT™ D25203K
HEAVY-DUTY 1” 3 MODE
D-HANDLE SDS HAMMER
• 2.3 ft-lbs. of impact energy, provide
fast drilling and powerful chipping.
• 7.5AMP motor provides high
performance and overload
protection.
• Reverse feature assists in the
removal of fasteners.
• Variable speed allows for precise
hole placement on work surface.
• Factory set clutch reduces sudden,
high torque reactions if bit jams.
• 360° side handle adjusts easily for
preference or use in tight spaces.
• Chipping (hammer only) mode
allows user to perform light
chipping applications such as
removal of mortar splatter.
415-824-4300
Code
B0D25203
• "Rotation only mode" allows tool to
be used for wood and metal drilling
(using SDS-to-round shank
adaptor).
Applications
• Optimum range in concrete: 5/32”-5/8”.
• Drilling capacities over a broad
range of mechanical and epoxy
anchoring applications.
151
DEWALT™ DW616
13⁄4 HP (MAXIMUM MOTOR HP)
FIXED BASE ROUTER
• 13/4 HP (maximum motor HP),
11AMP motor provides the power
to rout smoothly through the
toughest hardwoods.
• Micro-fine depth adjustment ring
provides precise depth adjustment
s in 1/64" increments and adjusts
vertically for a constant
switch/cordset location.
• Adjustable, tool-free steel motor
cam lock makes depth adjustment
and base changes quick and solidlocking.
• Quick release motor latches for
fast and easy motor pack removal
for bit and base changes.
• Detachable cordset offers cordset
serviceability and the ability to
use the same motor pack for all
bases.
• Sub-base concentricity gauge
included to ensure bit
concentricity for best-in-class
accuracy.
• Clear, LEXAN sub-base provides
enhanced base durability, bit
visibility, and accepts standard
template guide bushings.
• Rubber overmolded handles and
low center of gravity design
provide best-in-class comfort,
balance, and control.
Code
B0D616
• Heavy duty, precision machined,
die-cast aluminum base and
motor housing for durability and
low tool weight.
• Nickel plated motor housing for a
smooth, long-lasting depth
adjustment.
• Right or left switch and cordset
location provides the ability to
have the switch in your right or
left hand.
• Flat top for easy bit and depth
changes.
• Self-releasing, long, eight slotted
collets for better bit retention and
eliminates frozen bits.
Includes
• DW616M motor pack.
• DW6184 fixed base.
• 1/4" and 1/2" collets.
• Sub-base concentricity gauge.
• 2 wrenches.
DEWALT™ DW625
3HP HEAVY-DUTY VS
ELECTRONIC PLUNGE ROUTER
Code
B0D625
• 15.0AMP.
• 8,000–22,000RPM.
• Variable speed with electronic
feedback circuitry maintains
constant speed under load and
provides soft start.
• 1⁄4!– 1⁄2” collet capacity.
• Micro fine depth adjustor.
• Spindle lock button.
• Includes 1⁄4” and 1⁄2” collets,
template guide bushing adapter
and 2 wrenches.
152
415-824-4300
Code
DEWALT™ DW618PK
21/4HP (MAXIMUM MOTOR HP)
EVS FIXED BASE
PLUNGE ROUTER COMBO
KIT WITH SOFT START
• 21/4 HP (maximum motor HP),
12.0AMP electronic variable speed
motor provides the power to rout
smoothly through the toughest
hardwoods.
• Electronic variable speed with full
feedback control for constant speed
under load from 8,000-24,000RPM
and soft start to reduce start-up
torque for enhanced control.
• Micro-fine depth adjustment ring
provides precise depth adjustments
in 1/64" increments and adjusts
vertically for a constant
switch/cordset location.
• Adjustable, tool-free steel motor
cam lock makes depth adjustment
and base changes quick and solidlocking.
• Integral, through-the-column dust
collection collects 95% of the dust
and provides superior bit visibility.
• Quick release motor latches for fast
and easy motor pack removal for
bit and base changes.
• Detachable cordset offers cordset
serviceability and the ability to use
the same motor pack for all bases.
• Sub-base concentricity gauge
included to ensure bit concentricity
for best-in-class accuracy.
• Precision machined brass bushings
and case-hardened steel guide rods
provide a smooth and accurate
plunge stroke.
• Spindle lock to allow for one
wrench bit changes.
• Clear, LEXAN sub-base provides
enhanced base durability, bit
visibility, and accepts standard
template guide bushings.
• Rubber overmolded handles and
low center of gravity design provide
best-in-class comfort, balance, and
control.
• Dust-sealed switch provides
durability and long switch life.
• Heavy duty, precision machined,
die-cast aluminum base and motor
housing for durability and low tool
weight.
• Nickel plated motor housing for a
smooth,long-lasting depth
adjustment.
• Right or left switch and cordset
location provides the ability to have
the switch in your right or left hand.
• Flat top for easy bit and depth
changes.
• Self-releasing, long, eight slotted
collets for better bit retention and
eliminates frozen bits.
415-824-4300
B0D618
• Five position, adjustable turret stop
assists in stepped or repeated
plunge cuts.
• Micro-fine depth adjustment on
plunge base 5/128" per turn for
precise routing in veneer and
inlays.
• Easy to reach plunge lever and
switch for superior control while
routing.
Includes
• DW618M motor pack.
• DW6184 fixed base.
• DW6182 plunge base.
• 1/4" and 1/2" collets.
• Wrench.
• Sub-base concentricity gauge.
• Large hole sub-base.
• Vacuum adaptor.
153
DEWALT™ DW660
HEAVY-DUTY CUT-OUT TOOL
Code
Features:
• Tool-free bit change for fast and
easy bit changing.
• Turn-on/bump-off switch allows
users to shut tool off by bumping
against body.
• 5.0AMP, 30,000RPM motor provides
more cutting power.
• Slim body design for less fatigue
over prolonged use.
• Dust-sealed switch provides
durability and long switch life.
• Jampot construction gives the tool
jobsite durability.
Specifications
• 5AMP
• No Load Speed
• Collet Diameter
• Adjustable Guide
• Spindle lock
• Tool Length
• Tool Weight
• Shipping Weight
B0D660
Includes
• 1 general purpose bit.
• 1 drywall cutting bit.
• 1⁄4!, 1⁄8” collets.
DEWALT™ DW680K
HEAVY-DUTY 31/4”
PLANER KIT WITH 3/32”
(2.5MM) DEPTH OF CUT
• Heavy-Duty 7.0AMP motor provides
a smooth, even finish in the hardest
of woods.
3
• /32” (2.5mm) maximum cut in one
pass reduces the amount of passes
on your material.
• Accepts large resharpenable high
speed steel blades for straight or
framing applications.
• Calibrated Depth Adjustment Knob
for accurate depth settings and
eliminating the need to re-zero your
depth.
• Also accepts reversible carbide
blades for more detailed, accurate
woodworking.
• Precision-machined shoe bottom
and side provides flat surface finish
as well as accurate and square
rabbet joints.
• Three precision machined grooves
in front shoe provide three different
sizes for edge chamfering.
Code
B0D680
• Ergonomically designed two finger
trigger for increased comfort and
less user fatigue.
• 15,000RPM for a smooth, highquality cut.
Includes
• Two reversable carbide blades.
• Rabbeting fence.
154
415-824-4300
DEWALT™ DW682K
HEAVY-DUTY PLATE
JOINER KIT
Code
B0D682
• 6.5AMP.
• 10,000RPM.
• Integral fence with rack and pinion
height adjustment tilts 0–90º.
• Fence allows location on either face
of a miter joint.
• Preset depth stops for #0, #10 and #20
biscuits and 20MM depth of cut.
• Retractable steel anti-slip pins.
• Includes 6 tooth carbide blade, dust
bag, dust reflector, vacuum adapter,
torque key, wrench and heavy-duty
carrying case.
DEWALT™ DW705S
12” (305MM) HEAVY-DUTY
COMPOUND MITER SAW
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Code
B0D705S
13.0AMP, 4000RPM.
Electric brake.
100% ball bearings.
Stainless steel miter scale with 9
positive stops.
Precision miters 0–48º, right and left.
0–48º bevel capacity.
Automatically retracting lower guard.
Includes carbide blade and blade wrench.
Capacity:65⁄8” crown moulding.
77⁄8” base moulding.
2 x 8 @ 45º bevel.
2 x 6 @ 45º miter.
4 x 6 @ 90º miter.
4 x 4 @ 45º miter.
DEWALT™ DW708 12” HEAVY-DUTY
DOUBLE BEVEL SIDING
COMPOUND MITER SAW
Code
B0D708
• 13.0AMP, 4000RPM.
• Electric brake.
• 0–48º bevel capacity to the left
and right.
• 12” crosscut capacity at 90º.
• Precision miters 0–50º left and
0–60º right.
• Stainless steel detent plate with
11 positive stops.
• Includes carbide blade and
blade wrench.
• Capacity:
51⁄4” Crown moulding vertically.
51⁄4” Base moulding vertically.
41⁄2”x12 @ 90º miter.
4x8 @ 45º miter.
415-824-4300
155
DEWALT™ DW735
HEAVY-DUTY 13” THREE KNIFE,
2 SPEED THICKNESS PLANER
Code
B0D735
• Powerful 15MP, 10,000RPM motor
handles larger cuts in wider
materials with ease.
• Three knife cutter-head delivers
30% longer knife life and makes
knife change faster and easier.
• Two speed gear box allows users
to change feed speed to
optimizing cuts per inch at 96 or
179CPI.
• Fan-assisted chip ejection
vacuums chips off of the cutterhead and exhausts them out of
the machine.
• 193/4" cast aluminum base is 2X
more rigid than a standard 10"
base and folding tables.
• Material removal gauge and extralarge thickness scale deliver
accurate cuts with every pass.
• Extra-large turret depth stop
allows users to return to most
frequently used thicknesses with
ease.
Includes
• Dust hose apapter.
• Dust ejection shoot.
• Automatic carriage lock reduces
the movement that causes snipe
without the need for manual
engagement by the user.
DEWALT™ DW744S
HEAVY-DUTY 10" PORTABLE
TABLE SAW WITH STAND
Code
B0D744
• Exclusive, telescoping face
delivers 241/2” rip capacity without
sacrificing portability.
• Rack and pinion design makes
fence adjustments fast, smooth
and accurate ensuring the fence is
always parallel to the blade.
• Telescoping rails retract within the • Trim Carpenters: ripping moldings,
saw top for easy portability.
wainscotting, ripping and cross• Features a heavy-duty internal
cutting, 1x material for framing of
motor mechanism which stabilizes
book shelves and entertainment
the arbor, keeping vibration to a
centers, ripping framing lumber.
minimum.
• Deck Builders: ripping deck
• Dust collection Port easily
connects to a vacuum for for
efficient
dust extraction.
boards, rail cap, railings.
• Remodelers: ripping frming lumber,
sheet material (4’x8’), framing
lumber, 2”x12”, sizing materials up
• 31/8” X 191/4” table surface
to 3” thick, ripping and cross
provides superior material support.
cuttiing 1x material, used for
dados, rabbets, mortise and tenos.
Applications
• Cabnet Installers: ripping filler
boards.
• Hardwood Floor Installers: ripping
floor boards.
Includes
• 10” 24-Tooth SERIES 20™
carbide blade.
• Portable table saw
stand (DW7440).
• Miter gauge.
156
415-824-4300
DEWALT™ DWDC011
HEAVY-DUTY
WORKSITE RADIO CHARGER
Code
B0D011
• 1 hour charger for 7.2V to 18V
Dewalt NiCd battery packs (except
Univolt® batteries)
• Runs off of 7.2V to 18V Dewalt NiCd
making it a cordless radio.
• Digital Tuner with LCD display, builtin clock and 8 station memory
presents.
• Weather sealed charger door opens
• High efficency weather resistant
easily for fast battery changes.
speakers with dual bass ports
• The Dewalt 3-stage charging
maximum bass range.
system provides maximum run-time
• Dual pivoting 11” flexible antenna
provides more durability and better
reception.
• Heavy-Duty AM/FM radio with
auxilary port allows users to listen to
the radio, CD or MP3 player (when
plugged into the auxilary port).
and extends overall life of the
battery.
• Heavy-Duty storage case allows
storage for CD player, MP3 player
or CDs.
DEWALT™ DW920K-2
HEAVY-DUTY 1/4” (6MM)
7.2V CORDLESS TWO-POSITION
SCREWDRIVER KIT
Code
B0D920
• 80 in-lbs of maximum torque output
provides for a superior power to
weight ratio in a variety of
fastening applications.
• Adjustable two-position handle
allows for operation as both in-line
and pistol-grip.
• Variable speed and reversing trigger A p p l i c a t i o n s
switch provides 0-500RPM for
fastening and pre-drilling into wood, • #10 x 2” Wood Screw into 2” x 4”
SPF - 98 screws per charge.
plastics and light gauge metal.
•
#8-3”
Drywall Screw into 2” x 4”
• Industrial quick-release hex-shank
SPF
78
screws per charge.
chuck allows for quick screwdriver
bit change and prevents bit “run
• #8 x 21/2” Wood Screw into preout”.
drilled 9/64” diameter hole in a 2”
thick oak - 47 screws per charge.
• Electric brake provides increased
productivity.
• 7.2V battery pack allows for
longer run-time and charges in
one hour.
• Heavy duty metal hinge provides
secure and sustained
two-position lock.
• Tapered #6 x 3/4” wood srew into
oak - 156 screws.
• Ideal tool for any professional end
user looking for a durable and
powerful srewdriver.
Includes
• 1 hour charger.
• (2) 7.2V compact batteries.
• 2 screwdriver bits.
• heavy-duty kit box.
415-824-4300
157
DEWALT™ DW935K
14.4V HEAVY-DUTY
53⁄8” (136MM) CORDLESS
SAW KIT
Code
B0D935
• High performance fan cooled motor.
• Replaceable brushes for longer
motor life.
• Cuts 2X materials in a single pass.
• Left side blade for maximum visibility.
• Bevels 50º.
• Spindle lock for easy blade change.
• Includes: 1 hour charger, 53⁄8” 16
tooth carbide blade, XR PACK®
extended run-time battery, and
heavy-duty carrying case.
DEWALT™ DWDC385
HEAVY-DUTY 18V CORDLESS
Code
B0D385
• 1” stroke length and 2,900SPM for
fast cutting.
• Keyless blade clamp allows quick
blade change without touching
bladeor reciprocating shaft.
• Electric blade minimizes risk of
blade breaking when exiting
plunge cuts.
• Blade can be reversed for flush
and plunge cutting.
• Variable speed with trigger lock for
increased blade control.
• Compact and lightwieght; 7.1 lbs.
Includes
• Pivoting shoe with open top for
maximum visibility.
• 1 hour charger.
• 18V XR+™ pack battery.
• Reciprocation saw blade.
DEWALT™ DWDC390
18V CORDLESS CIRCULAR SAW
Code
• 3,700RPM for Fast Cutting.
B0D939
• Blade Located on Left Side for Better
Visibility.
• 6-1/2” 24 Tooth Carbide Blade allows
User to Cut 2x Material at 45˚ Bevel
Angle.
• Fan Cooled Motor with Replaceable
Brushes.
• 50˚ Bevel.
• Rip Fence Included for Increased
Ripping Accuracy.
• Includes: 1 Hr Charger with Tune-Up™
Mode, 1 XR+™ PACK Extended RunTime Batteries and Kit Box.
158
415-824-4300
DEWALT™ DW965K-2
HEAVY-DUTY 3/8” (10MM)
12V CORDLESS RIGHT
ANGLE DRILL / DRIVER KIT
• 2 speed ranges: 0-400/0-1200RPM
allowing the user to get into
tighter spaces while still having
access to the trigger.
• 180 in-lbs. of maximum torque for
increased applications such as
turning large bits and fasteners.
Code
BOD965
the convenience of reverse.
• Durable, right angle transmission
with sealed ball bearing provides a
longer tool life.
• Multi-grip trigger provides comfort
and convenience allowing the user I n c l u d e s
to get into tight spaces.
• 1 hour charger.
• Variable speed and reversing give
the user the ability to control
speed for greater accuracy, and
• (2) 12V compact batteries.
DEWALT™ DW052K-2
HEAVY-DUTY 12V
CORDLESS IMPACT DRIVER KIT
Code
B0D052
• Compact size and weight allows
access into tighter areas and
reduces user fatigue.
• 1000 in-lbs or max torque to perform
a wide range of fastening
applications.
• 0-2,400RPM/0-3,000BPM for faster
application speed.
• Textured anti-slip comfort grip
provides maximum comfort.
• Durable magnesium gear case and
all metal transmission for extended
durability.
• Heavy-duty impacting mechanism
directs torque to fastener without
kickback.
Applications
• Driving and removing fasteners
in wood.
• Fastening and removing nuts
and bolts.
• Drilling holes in wood and metal.
Includes
• 1 hour charger.
• (2) 12V XR Pack® batteries.
DEWALT™ DWDC980
HEAVY-DUTY XRP™ 1/2”
(13MM) 12V CORDLESS
DRILL / DRIVER KIT
Code
B0D980
• Dewalt built high torque motor
delivers 400 in.-lbs. of maximum
torque.
• XRP™ extended run-time batteries
provide long run-time and battery life.
• Superior ergonomics provides optimal
• Exclusive 3-Speed transmission
balance, control and comfort.
features a max 3rd speed at 1,800RPM.
• 1/2” Metal ratcheting chuck with I n c l u d e s
• 1 hour charger.
carbide jaws prevents bits from
• (2) 12V XRP™ batteries.
slipping.
• Double-ended screwdriver bit.
415-824-4300
159
DEWALT™ DWDC983
(13MM)14.4V CORDLESS
DRILL / DRIVER KIT
Code
B0D983
delivers 450 in-lbs of
maximum torque.
provide long run-time and
battery life.
features a max 3rd speed
at 1,800RPM.
• 1/2” Metal ratcheting chuck with
carbide jaws prevents bits
from slipping.
• Superior ergonomics provides
optimal balance, control and
comfort.
Includes
• 1 hour charger.
• (2) 14.4V XRP™ batteries.
• Double-ended screwdriver bit.
DEWALT™ DWDC987
(13MM)18V CORDLESS
DRILL / DRIVER KIT
Code
B0D987
delivers 500 in-lbs of
maximum torque.
provide long run-time and
battery life.
features a max 3rd speed
at 2,000RPM.
• 1/2” Metal ratcheting chuck with
carbide jaws prevents bits
from slipping.
Includes
• Includes 1 hour charger.
• XR2 PACK™ battery.
• 360° side handle.
160
415-824-4300
DEWALT™ CORDLESS BATTERY
Volts
Code
12
14
18
JOINER PLATE BISCUITS
Comes in three convenient sizes for
any woodworking project.
DW9071
DW9091
DW9096
Size
Qty
Code
#0
#10
#20
75
DW6800
DW6810
DW6820
AIR IMPACT SOCKET SET
Code
• 12 piece set.
• Deep 1⁄2” drive.
DW9099
• Heat treated.
• Forged steel.
• 1 socket clip.
• Contains:
3⁄8!, 7⁄16!, 1⁄2!, 9⁄16!, 5⁄8!,
11⁄16!, 3⁄4!, 13⁄16!, 7⁄8!, 15⁄16!,
and 1” sockets.
HEAVY-DUTY SPADE BIT
Dia
Precision ground point and cutting
edges are re-sharpenable for long life.
Milled flats on shank prevent slipping
in drill chuck. Drill clean, fast holes in
wood, plastic, plywood, and more.
Shank diameter on all bits is 1⁄4”
except the 1⁄4” bit which is 3⁄16!.
4”
61⁄8”
B16908
B17200
B17201
B17202
B17203
B17204
B17205
B17206
B17208
B17210
1⁄4”
5⁄16”
3⁄8”
7⁄16”
1⁄2”
9⁄16”
5⁄8”
B16910
B16912
B16914
B16916
3⁄4”
7⁄8”
1”
11⁄8”
11⁄4”
13⁄8”
11⁄2”
B16920
B16924
Extensions
6”
12”
415-824-4300
161
Quick Change
61⁄4”
16”
B16706
B16708
B17212
B17213
B17214
B17215
B17216
B16710
B16712
B16714
B16716
Code
B17218
B17219
DEWALT™ DW1956
Code
16 piece drill bit set contains:
1⁄16!, 5⁄64!, 3⁄32!, 7⁄64!, 1⁄8!, 9⁄64!, 5⁄32!,
11⁄64!, 3⁄16!, 13⁄64!, 7⁄32!, 15⁄64!, 1⁄4!, 5⁄16!,
3⁄8!, 1⁄2!.
DW1956
DEWALT™ DW1969
INDUSTRIAL DRILL BIT SET
Code
29 piece black oxide set contains:
1⁄16!, 5⁄64!, 3⁄32!, 7⁄64!, 1⁄8!, 9⁄64!, 5⁄32!,
11⁄64!, 3⁄16!, 13⁄64!, 7⁄32!, 15⁄64!, 1⁄4!, 17⁄64!,
9⁄32!, 19⁄64!, 5⁄16!, 21⁄64!, 11⁄32!, 23⁄64!, 3⁄8!,
25⁄64!, 13⁄32!, 27⁄64!, 7⁄16!, 29⁄64!, 15⁄32!,
31⁄64!, 1⁄2!.
DW1969
INDUSTRIAL DRILL BITS
• Black oxide coated for greater
resistance to wear.
• Industrial M7 grade steel.
Dia
(In)
Dia
(Dec)
Drilling
Depth
Overall
Length
Code
1⁄16”
.0625
.0781
.0938
.1094
.1250
.1406
.1562
.1719
.1875
.2031
.2188
.2344
.2500
.2656
.2812
.2969
.3125
.3281
.3438
.3594
.3750
.3906
.4062
.4219
.4375
.4531
.4688
.4844
.5000
.88
1.00
1.25
1.50
1.62
1.75
2.00
2.12
2.31
2.44
2.50
2.62
2.75
2.88
2.94
3.06
3.19
3.31
3.44
3.50
3.62
3.75
3.88
3.94
4.06
4.19
4.31
4.38
4.50
1.88
2.00
2.25
2.62
2.75
2.88
3.12
3.25
3.50
3.62
3.75
3.88
4.00
4.12
4.25
4.38
4.50
4.62
4.75
4.88
5.00
5.12
5.25
5.38
5.50
5.62
5.75
5.88
6.00
DW1704
DW1705
DW1706
DW1707
DW1708
DW1709
DW1710
DW1711
DW1712
DW1713
DW1714
DW1715
DW1716
DW1717
DW1718
DW1719
DW1720
DW1721
DW1722
DW1723
DW1724
DW1725
DW1726
DW1727
DW1728
DW1729
DW1730
DW1731
DW1732
5⁄64”
3⁄32”
• Ideal for drilling in metal,
wood, plastic.
7⁄64”
1⁄8”
9⁄64”
5⁄32”
11⁄64”
3⁄16”
13⁄64”
7⁄32”
15⁄64”
1⁄4”
17⁄64”
9⁄32”
19⁄64”
5⁄16”
21⁄64”
11⁄32”
23⁄64”
3⁄8”
25⁄64”
13⁄32”
27⁄64”
7⁄16”
29⁄64”
15⁄32”
31⁄64”
1⁄2”
162
415-824-4300
BI-METAL DEEP CUT HOLE SAWS
Industrial, rugged hole saws
designed for heavy cutting in
standard or deep cut applications.
Size
• Extra hard, variable pitch, high
speed steel teeth stay sharper and
cut faster.
7⁄8”
5⁄8”
3⁄4”
1”
11⁄8”
11⁄4”
13⁄8”
11⁄2”
15⁄8”
13⁄4”
2”
• Rugged alloy steel body for long life.
• Thicker backing plate for durability
that alleviates need for torque
driving plate.
• Ideal for cutting holes in steel,
stainless steel, brass, bronze,
copper, aluminum, wood, plastic
and other compositions.
Code
Size
Code
DI80010
DI80012
DI80014
DI80016
DI80018
DI80020
DI80022
DI80024
DI80026
DI80028
DI80032
21⁄8”
21⁄4”
23⁄8”
21⁄2”
23⁄4”
3”
31⁄2”
35⁄8”
4”
41⁄8”
41⁄4”
41⁄2”
DI80034
DI80036
DI80038
DI80040
DI80044
DI80048
DI80056
DI80058
DI80064
DI80066
DI80068
DI80072
Chuck Cap
Size
Code
Round
Hex
Hex
Pilot Drill
9⁄16!–13⁄16”
DW1800
DW1802
DW1803
DW1808
HOLE SAW MANDRELS
Shank Size
1⁄4”
7⁄16”
7⁄16”
1⁄4”x4”
INDUSTRIAL ROUND SHANK
PERCUSSION BITS
Size
• High percussion bits for masonry
applications.
⁄ ”x 3”
⁄ ”x 3”
3⁄16”x 6”
1⁄4”x 6”
1⁄4”x12”
5⁄16”x 6”
5⁄16”x12”
3⁄8”x 6”
3⁄8”x12”
1⁄2”x 6”
1⁄2”x12”
5⁄8”x 6”
5⁄8”x12”
3⁄4”x 6”
3⁄4”x12”
1”x12”
18
3 16
• Ideal for percussion or rotary
drilling applications in rotary drills
and hammer drills.
415-824-4300
163
11⁄4!–23⁄8”
21⁄2!–5”
Code
DW5221
DW5222
DW5223
DW5225
DW5226
DW5228
DW5229
DW5230
DW5231
DW5235
DW5236
DW5241
DW5242
DW5244
DW5245
DW5249
HEAVY-DUTY AUGER BIT
Size
4” twist with a 61⁄2” overall length.
7⁄16” hex shanks for sure chuck grip.
Precision made of special bit steel,
heat treated and tempered for long
life. Feed screw pilot draws bit into
wood. Cutting spurs and lips stay
sharper longer.
3⁄8”
Length
Code
61⁄2”
B17220
B17222
B17224
B17226
B17228
B17230
B17232
B17234
B17235
B17236
B17238
B17240
B17242
B17244
Length
Code
17”
B17376
B17377
B17378
B17379
B17380
B17381
B17382
B17384
B17385
1⁄2”
9⁄16”
5⁄8”
11⁄16”
3⁄4”
13⁄16”
7⁄8”
15⁄16”
1”
11⁄8”
11⁄4”
13⁄8”
11⁄2”
POWER SHIP AUGER BITS
Size
Use where foreign material may be
encountered. For boring work in large
timber, telephone poles, docks and
bridges, and in mining and construction.
Single twist type with single cutter
and side lip. Has hollow center twist
medium-fast screw pitch. Heat treated
full length, cutting head can be
sharpened. 17” overall length, 12”
twist, 5” hex shank.
1/2”
9⁄16”
5⁄8”
11⁄16”
3⁄4”
13⁄16”
7⁄8”
1”
11⁄16”
DEWALT™
DRILL AND DRIVE SYSTEM SET
Code
Contains:
DW2730
1 - Magnetic drill and drive system shaft.
1 - Driver.
1 - #6 Drill/counter sink insert.
1 - #1 Phillips bit tip.
1 - #2 Phillips bit tip.
164
415-824-4300
DEWALT™
RAPID LOAD HOLDER
Code
• Pressure activated ball-groove
system for rapid loading and
strong retention.
DW2505
• Impact and rust resistant nickel
plated nose.
• Stainless steel interior parts.
• Impact resistant polymer
exterior.
DEWALT™ 2513
15PC RAPID LOAD
Code
Rapid Load® Holder
DW2513
(1) - Compact Magnetic Drive Guide
(1) - 1/8” Hex Shank Drill Bit
(1) - #2 Phillips 2” Power Bit
(1) - #2 Square Recess 2” Power Bit
(1) - #1 Phillips 1” Insert Bit Tip
(4) - #2 Phillips 1” Insert Bit Tips
(1) - #1 Square Recess 1” Bit Tips
(2) - #2 Square Recess 1” Bit Tips
(1) - #8 Slotted 1” Insert Bit Tip
DEWALT™ 2518
RAPID LOAD
Rapid Load® Holder
Code
DW2518
(1) - Compact Magnetic Drive Guide
(1) - 1/4” x 17/8” Magnetic Nutdriver
(1) - 5/16” x 17/8” Magnetic Nutdriver
(1) - 1/4” Socket Adapter
(1) - 3/8” Socket Adapter
(2) - 1/8” Hex Shank Drill Bits
(1) - #1 Phillips 2” Power Bit
(1) - #1 Square Recess 1” Bit Tip
(1) - 2 Phillips 2” Power Bit
(1) - #2 Square Recess 1” Bit Tip
(1) - 2 Square Recess 2” Power Bit
#
#
(1) - 8 Slotted 2” Power Bit
#
(1) - #10 Slotted 2” Power Bit
415-824-4300
165
DEWALT™
RAPID LOAD HEXSHANK BITS
Size
• Split point tip prevents walking.
• Black oxide coating provides longer life.
DEWALT™
RAPID LOAD MASONRY BIT
Qty.
Code
6pc set
1/16”
3
/32”
1
/8”
5
/32”
3
/16”
1
/4”
EA
DW2551
DW2552
DW2553
DW2554
DW2555
DW2556
DW2557
Size
Qty.
Code
EA
EA
DW2571
DW2572
DW2573
DW2574
Qty.
Code
EA
DW2535
DW2567
DW2568
DW2569
DW2570
• Carbide tip aggresively penetrates
surfaces.
3pc set
5/32”
3
/16”
1
/4”
DEWALT™
RAPID LOAD COUNTERSINK SET
Size
• For drilling in brick, block, concrete.
3pc set (6,8,10)
#6
#8
#10
#12
• Drill countersink and
counterbore in one step.
• Four cutter countersink and
tapered drill bit provide
superior speed and finish.
Replacement Drill Bits
/ ” for #6
11/64” for #8
3/16” for #10
7/32” for #12
9 64
166
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
DW2537
DW2538
DW2539
DW2540
415-824-4300
DEWALT™
RAPID LOAD SOCKET ADAPTER
• Hardened steel for maximum
durability.
Size
Qty.
Code
/4”
/8”
EA
EA
DW2541
DW2542
1
3
• Adapts sockets for use in drills.
DEWALT™
RAPID LOAD MAGNETIC NUTDRIVER
Size
Code
EA
5
EA
EA
DW2218
DW2219
DW2220
Qty.
Code
EA
DW2055
Qty.
Code
EA
DW2054
/4”
/16”
3/8”
• Hardened steel for maximum
durability.
• Powerful magnet for strong
retention.
DEWALT™
RAPID LOAD 6” MAGNETIC
DRIVE GUIDE
Size
6”
• Holds screw in correct position
without wobbling or slipping.
DEWALT™
RAPID LOAD COMPACT
DRIVE GUIDE
• Holds screw in correct position
without wobbling or slipping.
415-824-4300
Qty.
1
167
BELL HANGER BIT
• A hole in the flute makes it easy to
pull wires through walls, ceilings,
and floors.
Size
Code
5⁄16”x18”
3⁄4”x18”
B13322
B13323
B13325
B13326
B13327
B13328
Size
Code
⁄”
⁄”
1⁄2”
5⁄8”
3⁄4”
7⁄8”
1”
11⁄4”
13⁄8”
11⁄2”
15⁄8”
13⁄4”
17⁄8”
2”
21⁄8”
B42904
B42906
B42908
B42910
B42912
B42914
B42916
B42920
B42922
B42924
B42926
B42928
B42930
B42932
B42934
Size
Code
⁄”
⁄ ”
1⁄4”
5⁄16”
3⁄8”
7⁄16”
1⁄2”
DW1740
DW1741
DW1742
DW1743
DW1744
DW1745
DW1746
3⁄8”x18”
1⁄2”x18”
• For installing telephones, cable TV,
computers, security systems.
9⁄16”x18”
5⁄8”x18”
F0STNER WOOD BORING BITS
• Ideal for drilling large holes in wood,
thin stock and veneer.
14
38
• Precesion ground for clean holes
without chipping or splintering.
BRAD POINT DRILL BIT
• Self center starter point for
accurate, precision drilling.
18
3 16
• Negative grind cutting edges for
quicker chip expulsion.
168
415-824-4300
INDUSTRIAL SDS PLUS BITS
Size
Ideal for drilling holes in stone, brick,
concrete, and most other masonry
products. For use in SDS hammers.
1⁄4”x6”
1⁄4”x81⁄2”
5⁄16”x6”
5⁄16”x12”
3⁄8”x6”
3⁄8”x12”
1⁄2”x6”
1⁄2”x12”
9⁄16”x6”
9⁄16”x12”
5⁄8”x8”
5⁄8”x12”
3⁄4”x8”
3⁄4”x12”
7⁄8”x8”
7⁄8”x12”
1”x10”
1”x18”
Code
DW5417
DW5418
DW5424
DW5426
DW5427
DW5430
DW5437
DW5439
DW5442
DW5443
DW5446
DW5447
DW5453
DW5455
DW5460
DW5461
DW5464
DW5466
SDS Chuck Adapter
DW5351
Chuck Key
1⁄2”
SPLINE SHANK PERCUSSION BIT
Size
⁄ ”x13”
1⁄2”x16”
5⁄8”x16”
3⁄4”x16”
7⁄8”x16”
1”x16”
11⁄8”x16”
11⁄4”x16”
13⁄8”x16”
11⁄2”x16”
38
415-824-4300
169
DW5353
Code
DW5701
DW5704
DW5710
DW5715
DW5719
DW5721
DW5725
DW5727
DW5729
DW5732
CUT OUT TOOL ACCESSORY
Features:
• One flute design provides
increased chip clearance for fast
cutting (DW6601, DW6605,
DW6609).
Diameter
Overall
Length
⁄”
⁄”
1⁄8”
1⁄4”
2⁄”
21⁄4”
23⁄8”
31⁄4”
Diameter
Overall
Length
⁄”
⁄”
2”
2”
18
18
• Left-hand spiral directs chips and
dust into wall cavity for a cleaner
work environment (DW6601,
DW6605, DW6609).
34
Description
Code
General Pupose Bit
Drywall/Outlet Bit
Guide Point Bit
Window & Door
DW6601
DW6603
DW6605
DW6609
• Guide point design for effective
cutting around outlet boxes and
other objects (DW6605).
• 1⁄4” diameter for increased
durability (DW6609).
• One flute design provides
increased chip clearance for fast
cutting (DW601, DW6605,
DW6609).
• Left-hand spiral directs chips and
dust into wall cavity for a cleaner
work environment (DW6601,
DW6605, DW6609).
• Guide point design for effective
cutting around outlet boxes and
other objects (DW6605).
• 1⁄4” diameter for increased
durability (DW6609).
18
18
Description
Code
⁄ ” Carbide Burr Bit
⁄ ” Carbide Burr Bit
18
14
DW6611
DW6613
REPLACEMENT COLLETS
Diameter
Code
⁄”
⁄”
DW6615
DW6617
18
14
170
415-824-4300
INDUSTRIAL JIG SAW BLADES
Teeth Per
Blade
Inch Length Qty Type
Wood Cutting
• Reinforced tooth design for
precision cutting and long life.
3
Thin metal cutting.
DW3724
24
5-1⁄4”
3
Extra long
DW3726
36
3”
3
Thin metal cutting.
Sheet metal cutting.
DW3728
415-824-4300
171
3
DW3765
3”
• Ideal for cross cutting, ripping
scrolling, and plug cutting
applications.
4”
DW3715
24
• Heat treated and tempered for
maximum life in industrial
applications.
10
DW3760
• Cobalt steel teeth for greater
durability.
• Precision sharpened teeth for high
performance and ease of cut.
3
DW3710
3
• Thicker and wider blank design
offers durability and accurate
cutting.
4”
DW3753
3”
Offers an extensive line of high
performance industrial reciprocating
blades providing durability and
maximum cutting performance.
6
DW3703
18
INDUSTRIAL RECIPROCATING
SAW BLADES, 1⁄2” UNIVERSAL SHANK
3
DW3751
3
–
4”
DW3700
3”
• Reinforced tooth design for
precision cutting and long life.
6
DW3750
12
Metal Cutting
3
–
• Enlarged gullet for efficient chip
removal.
• Cobalt steel teeth for greater
durability.
4”
T Shank
(Bosch)
Very fast cut
rough finish wood.
Ripping/crosscut
straight cutting (wide).
Fast cut
clean finish wood.
Fine cut
smooth finish wood
Trim/coping
wood cutting.
Medium metal cutting.
• Side chip path for superior finish.
6
Universal
Shank
DW3774
DW3776
DW3778
Size
Qty
Code
6” 6T BI-MT Fast Cut Wood5
4” 14T BI-MT Metal
6” 10-14T BI-MT Wood/Metal
8” 10-14T Wood/Metal
6” 5-8T BI-MT Wood/Nail EM
9” 5-7T BI-MT Wood/Nail
12” 5-7T BI-MT Wood/Nail
9” -6T BI-MT Wood Fast Cut
12” -6T BI-MT Wood Fast Cut
6” -6T BI-MT Wood/Compos Fast Cut
6” -6T BI-MT Plasterboard
6” -10T BI-MT Wood/Metal
6” -3TH Wood Nail
8” -18TH Metal
9” -14TH Metal
12” -14TH Metal
6” -6TH Demolition
8” -6TH Demolition
6” 10-14TH Demolition
8” 10-14TH Demolition
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
5EA
DW4802
DW4807
DW4810
DW4812
DW4808
DW4811
DW4845
DW4846
DW4847
DW4848
DW4849
DW4803
DW4804
DW4850
DW4851
DW4806
DW4801
DW4821
DW4809
DW4838
DW4862
DW4863
DW4864
DW4865
PAIR OF CARBIDE PLANER BLADES
• For use with DW677K, DW680K,
or DW678K
Qty
Code
1 PR
DW6654
• Reversible carbide straight blades.
• Sharpening on both sides allows
reversal for longer life.
STRAIGHT BITS
Cutting
Dia
Carbide tipped, straight flute bits.
⁄”
⁄ ”
1⁄4”
3⁄8”
1⁄2”
3⁄4”
CARBIDE MORTISING BITS
⁄ ”
⁄”
3⁄4”
1”
1”
3⁄4”
1”
1”
1”
11⁄16”
11⁄16”
11⁄16”
15⁄8”
17⁄8”
2”
25⁄16”
25⁄16”
21⁄16”
DW6407
DW6409
DW6411
DW6417
DW6418
DW6421
14
⁄”
Cutting
Length
Overall
Length
⁄”
2”
34
Cutting
Length
⁄”
Shank
Dia
Code
⁄”
DW6427
14
Shank
Length
Shank
Dia
Overall
Length
Code
⁄”
1”
2⁄”
DW6442
Code
34
14
Cutting
Length
Shank
Dia
Shank
length
Overall
Length
3⁄8”
1⁄2”
1⁄4”
1⁄2”
1⁄2”
1⁄4”
1 ”
11⁄8”
23⁄8”
Cutting
Dia
CARBIDE PORTABLE TOOL LAMINATE
TRIM BITS
Cutting
Dia
A variety of bits for laminate trimmer
application.
7⁄16”
172
⁄”
⁄”
1⁄4”
1⁄4”
1⁄4”
1⁄4”
14
14
Carbide laminate with bearing guide.
Designed for fast, smooth trim cuts.
Precision ground to close tolerance for
perfect results. Complete with dustslinger shield ball bearing guide, which
prevents marring or burning of edge
surface at any feed rate.
Code
12
Cutting
Dia
LAMINATE TRIM BITS
Overall
Length
5 16
⁄”
PANEL PILOT BITS
Shank
Length
3 16
12
For use in cutting panels and
windows, floors and ceiling cutouts
where abrasive materials are
encountered. All bits equipped with
drill-through point. Available in singleflute or longer-lasting, smoothercutting two-flute design.
Shank
Dia
18
Cutting
Dia
Carbide tipped designed for use with all
hinge butt templates. Deep center gullet
allows maximum chip removal.
Cutting
Length
1⁄16
Shank
Dia
Type
Of Cut
Overall
Length
1⁄4”
22º bevel
Flush & 22º
15⁄32”
9⁄32”
12
211⁄16”
DW6431
DW6434
Flutes
Code
2
1
DW6437
DW6441
415-824-4300
CARBIDE BEADING BITS
Radius
Carbide Tipped. Designed especially
for decorative edging. Leaves a 1⁄16”
edge bead. Can be converted to
corner rounding bit by substituting
replacement bearing 1⁄2” DW6922.
Large
Dia
Cutting
Length
Shank
Dia
Overall
Length
Code
1”
11⁄4”
1⁄2”
1⁄4”
5⁄8”
1⁄4”
17⁄8”
21⁄16”
DW6445
DW6447
Cutting
Length
Shank
Dia
Overall
Length
Code
⁄”
⁄”
1⁄4”
1⁄2”
2”
2”
27⁄16”
29⁄16”
DW6449
DW6451
DW6455
DW6457
Overall
Length
Code
15⁄8”
⁄ ”
2”
121⁄32”
DW6486
DW6487
Shank
Length
Overall
Length
Code
1⁄4”
3⁄8”
CARBIDE CORNER ROUNDING BITS
Large
Dia
Carbide tipped. Designed especially
for satin-smooth, uniformly rounded
edges. Can be converted to beading
bit type by substituting replacement
bearing 3⁄8” DW6920.
Radius
CARBIDE ”V” GROOVING BITS
Large Carbide
Dia
Height
⁄”
⁄”
3⁄8”
1⁄2”
36
14
Carbide tipped. Designed for shallow
and deep grooving cuts in solid
woods and composition materials.
Maximum depth of cut on this series
is one-half of the cutting diameter.
⁄”
⁄”
CARBIDE CORE BOX BITS
(ROUND NOSE BITS)
15 32
14
Cutting
Length
⁄ ”
⁄ ”
Shank Shank
Dia Length
⁄”
⁄”
5 16
5 32
14
38
12
3 16
14
⁄”
⁄”
14
Cutting Cutting
Dia
Length
Shank
Dia
11 32
⁄”
DW6481
DW6483
38
12
CARBIDE COVE BITS
Radius
Carbide tipped. Double fluted carbide
cove bits are for decorative edging.
They feature a shielded ball bearing
guide which prevents marring or burning
of edge surfaces at any feed rate.
415-824-4300
⁄ ”
⁄”
⁄ ”
⁄ ”
5⁄8”
11⁄16”
14
14
Radius
Carbide tipped. The high, up-shear
angle lifts the chip out of the core
box cut to give a perfect radius cut
with no fuzzing. Round-nose bits are
often used in pattern and furniture
plants. Soft or hard woods,
composition materials are easily
machined with these bits. Precision
ground radii held to close tolerances.
1”
1”
11⁄4”
11⁄2”
15 32
⁄”
⁄”
14
12
173
Cutting
Dia
7⁄8”
13⁄8”
Cutting Shank
Length
Dia
⁄”
⁄ ”
⁄”
⁄”
12
14
21 32
14
Shank
Length
Overall
Length
Code
1”
1”
115⁄16”
21⁄8”
DW6461
DW6463
CARBIDE RABBETING BITS
Large
Dia
Carbide tipped. Carbide rabbeting bits
designed for fast smooth step cutting
in wood and composition materials.
Cutting
Length
Depth
Of Rabbet
Shank
Dia
Overall
Length
Code
1⁄2”
3⁄8”
1⁄4”
25⁄8”
DW6464
11⁄4”
CARBIDE OGEE BITS
Large
Dia
Cutting
Length
Shank
Dia
Overall
Length
Code
13⁄8”
9⁄16”
1⁄4”
23⁄8”
DW6474
Radius
Large
Dia
Cutting
Length
Shank
Dia
Overall
Length
Code
5⁄32”
11⁄16”
15⁄32”
1⁄4”
21⁄8”
1⁄4”
13⁄8”
3⁄4”
1⁄4”
23⁄8”
DW6469
DW6470
Large
Dia
Cutting
Length
Shank
Dia
Overall
Length
Code
⁄”
2⁄”
DW6467
Radius
Carbide tipped. Double fluted bits with
fillets feature high axial and radial
hood angles for fast, clean cutting.
One or two fillets available.
3⁄16”
CARBIDE ROMAN
OGEE BITS
Carbide tipped. Designed for
decorative molding on a variety of
hardwoods and composition materials.
Two radii are precision ground to
ensure matching patterns.
CARBIDE CLASSICAL BITS
Radius
Carbide tipped. For classic decorative
design. The classical bits feature a
shielded ball bearing guide which
prevents marring or burning of edge
surface at any feed rate.
⁄ ”
1⁄”
5 32
CHAMFER BITS
Bevel
DOVETAIL BITS
Cutting
Dia
45º
⁄ ”
17 32
174
11 16
14
58
Overall Flute Shank Shank Bearing Overall
Dia Length Dia length Dia Length
Two flute, carbide tipped, ball bearing
pilot. For beveling and decorative
edging.
For making dovetail joints. Carbide
tipped.
⁄ ”
12
11⁄2”
⁄”
58
Cutting
Length
⁄”
12
⁄”
14
11⁄4”
⁄”
12
23⁄16”
Code
DW6476
Shank
Dia
Flute
Length
Overall
Length
Code
⁄”
1⁄”
1⁄”
DW6488
14
18
58
415-824-4300
CARBIDE SAW BLADES
Size
• Triple action sharpening processgrinds carbide tip to a razor sharp
cutting edge for exceptionally
smooth finish.
Code
53⁄8”x 24
Th
61⁄2”x 18 Th
81⁄4”x 24 Th
81⁄4”x 40 Th
71⁄4”x 36 Th
71⁄4”x 24 Th
71⁄4”x 18 Th
10”x 32 Th
10”x 60 Th
12”x 32 Th
12”x 80 Th
• Heavy-duty C-3 tungsten carbide
tips maintain cutting edge for
longer blade life.
• Thin kerf blade design yields more
cuts per charge by minimizing
battery drain.
• Reamed arbor hole minimizes blade
runout for smoother cutting action.
Framing
Demolition
DW9054
DW3161
DW3182
DW3184
DW3576
DW3578
DW3191
DW3103
DW3106
DW3123
DW3128
• Fully hardened heat treated steel
body retains its extreme flatness for
a more accurate cutting line.
INDUSTRIAL DRY CUT
DIAMOND SAW BLADES
Size
41⁄2”
These continuous rim diamond blades
provide the ultimate performance in
concrete, reinforced concrete, stone,
granite, brick, tile and most other masonry
materials. Lasts up to 100 times longer
than abrasive blades.
Guard for 4” Angle Grinder
Code
DW4701
B40289
• Cuts faster and easier with less power
requirements from the tool.
• Superior edge design provides
an efficient means to clear dust from cut.
• Constant depth of cut eliminates
multiple blade changing.
• Continuous rim design provides long
life with less breakage than other
types of diamond blades.
• Ideal for use with portable electric tools.
No water is needed. Cuts dry.
DEWALT™ HIGH PERFORMANCE
MASONRY BLADE
Size
Diamond mator provides improved
performance and lasts up to 30
times longer than abrasive blades.
7”
Code
DW4712
HARDIPLANK® CIRCULAR
SAW BLADES
Size
Code
• Designed for cutting fiber cement.
71⁄4”
DW3193
• Polycrystalline diamond tooth
design
• Six teeth for smooth cuts and
clean finish.
415-824-4300
175
CMT FRAMING/
DECKING BLADES
Size
• Take the finest industrial quality blade
right to the job site with CMT’s new
Framing / Decking blade.
Code
71⁄2”x24
DW3500
th
• With 24 tough carbide teeth, these
blades are designed for general rip and
cut off work where speed, efficiency and
durability are the key considerations.
INDUSTRIAL ABRASIVES
BLADES
Size
For high performance and quality cuts in
metal and masonry.
Type
Qty
Code
Metal
Masonry
EA
DW3511
DW3521
Size
Type
Qty
Code
4⁄”
Metal
Masonry
EA
DW4514
DW4524
7”
• Metal arbor prevents “shearing.”
• Double reinforced for increased life and
durability.
• Industrial formulation provides long life.
• Ideal for use in cutting and chopping
applications on all 7” and 8” circular saws.
INDUSTRIAL ABRASIVES DEPRESSEDCENTER WHEELS
Industrial grade grinding wheel for heavy-duty
cutting, grinding and material removal
applications.
12
• Double reinforced with industrial grit and
glue for increased life and faster cuts.
• Superior friability that allows the wheel to
break down and dissipate rather than melt
down thus increasing sharpness for longer
life and maximum grinding applications.
WD40 LUBRICATING OIL
Code
93WD40
176
415-824-4300
AIR TOOLS AND ACCESSORIES
TYPE “C” AUTOMOTIVE STANDARD
COUPLERS
PLUGS
Thread Type
PLUGS
415-824-4300
Code
Male
1/4”
98W104
Female
1/4”
98W103
Male
1/4”
98W105
Female
1/4”
98W106
Thread Type
COUPLERS
NPT Size
NPT Size
Code
Male
3/8”
98W104B
Female
3/8”
98W103B
Male
3/8”
98W105B
Female
3/8”
98W106B
177
TYPE “D” INDUSTRIAL INTERCHANGE
Thread Type
COUPLERS
PLUGS
NPT Size
Code
Male
1/4”
98W102
Female
1/4”
98W102A
Male
1/4”
98W102C
Female
1/4”
98W102B
TYPE “G” AUTOMOTIVE STANDARD
Thread Type
COUPLERS
NPT Size
Code
Male
3/8”
98W104A
Female
3/8”
98W103A
Male
3/8”
98W105A
Female
3/8”
98W106A
PLUGS
178
415-824-4300
BUSHINGS AND ADAPTORS
SOLID BRASS NPT
Male-NPT
Female-NPT
Code
3/8”
1/4”
98W6814
1/4”
3/8”
98W6815
MALE PIPE COUPLINGS
SOLID BRASS NPT
Male-NPT
415-824-4300
179
Male-NPT
Code
1/4”
1/4”
98W1414
1/4”
3/8”
98W3814
3/8”
3/8”
98W3838
DEWALT EMGLO™ COMPRESSORS
• 2HP electric twin stack.
Qty
• Direct drive
EA
Code
BA55151
• 120V AC 14 AMP, 60HZ, 2 pole
induction motor.
• 3.2CFM
• 3400RPM
• 53.32 lbs
DEWALT NAILERS
Code
• 15 Ga. 34˚ angled finish nailer.
• 3.85 lbs
• 1-1/4” – 2-1/2”
• 110 nails.
• Rear load, dual load.
• Tool-free indexed.
• Low profile overmolded.
• Tool-free reversible.
• Tool free.
BA51275
Code
• 16 Ga. finish nailer.
• 3.9 lbs
• 1-1/4” – 2-1/2”
• 160 nails.
• Rear load, dual load.
• Tool free.
BA51256
Code
• 18 Ga. 2” brad nailer.
• 2.8 lbs
• 5/8” – 2”
• 110 nails.
• Side load
• Tool free.
BA51238
• 20˚ full round head framing nailer
• 7.6 lbs
• 2” – 3-1/2”
• .113” – .148”
• 65 nails
• Drop sleeve
• Tool free.
BA51845
Code
180
415-824-4300
3⁄8”
AIR-LINE
• Heavy duty rubber hose
assembly.
Size
Code
50’
98W001
• 2 ply braided hose with
connectors.
AIR TOOL LUBRICATING OIL
Size
Code
4OZ
98W040
Size
Code
BLOW GUN
• Perfect tool for cleaning.
1
HITACHI NR83A 22
/4” Female pipe thread
98W002
O
Code
FRAMING NAILER
98W100
PALM NAILERS
Code
Advantages
•
•
•
•
•
•
98W015
Benefits
• Easily operates in confined areas.
• Light weight.
• Low cost.
• Sale-cannot misfire nails.
• Capable of driving any nail from 700 spikes to small
finishing nails with equal ease and accuracy.
• Variable depth control.
• Backed by one of the strongest warranties in the industry.
• Designed by tradesmen for tradesmen.
• Made in America using only American made components.
Eliminates bent nails.
Eliminates Carpenters Thumb.
Eliminates mis-directed hammer blows.
Eliminates inspection problems.
Guarantees accurate/precise nailing.
Reduces fatigue.
415-824-4300
181
PASLODE® TOOLS AND ACCESSORIES
PASLODE® CORDLESS FUEL CELLS
Type
Qty
Code
Angled
4 EA
98W040D
Straight
2 EA
98W040E
Framer (Red)
2 EA
98W040F
Type
Qty
Code
Battery (ALL)
EA
98W040A
Type
Qty
Code
Tool Oil
EA
98W040B
Type
Qty
Code
Degreaser Cleaner
EA
98W040C
PASLODE® CORDLESS TOOL ACCESSORIES
182
415-824-4300
PASLODE® TOOLS AND ACCESSORIES
PASLODE® CORDLESS NAILERS
Both impulse tools come with their
own hard-sided carrying cases,
each including:
• Rechargeable battery.
• 3-hour AC baterry charger.
• Clear and tinted* safety glasses.
** Fuel calls not included.
Straight Brad Nailer
Model
Size
Qty
Code
IM250II
16 GA
EA
98W100A
Angled Finish Nailer
Model
Size
Qty
Code
IM250A
16 GA
EA
98W100B
Model
Qty
Code
IMCT 30º
EA
98W100C
PASLODE® CORDLESS UTILITY FRAMING NAILER
• Fast Set Up – The convenience of no
hoses, no compressors.
• Lightweight and Well-Balanced –
Very maneuverable. Work all day
with less arm fatigue.
• Easy to Operate – Depress tool only
to drive a nail. Fits between joists
and studs.
• Reliable, State-of-Art Electronics –
Consistent long-life ignition. No
break-in period. No “flooding.”
Consistent nail drive and speed.
• Powerful Motor – Drives 2” to 3”
fasteners for every framing
application. Versatile: can do a wide
variety of jobs with one tool.
• Mobile – Allows you to move
throughout the job site without any
restrictions.
Convenient Carrying Case:
Cordless tools come with their own
hard-sided carrying cases. Standard
equipment includes:
• Cordless Framing Nailer.
• Tackles Tight Spots – Lets you work
• Rechargeable battery.
comfortably in cramped overhead and
• 2-hour AC battery charger.
other hard-to-reach places.
• Convenient storage compartments for
• Heavy-Duty Housing – These tools
fuel cells and fasteners.
are tough! The reinforced durable
housing comes with a 5-year warranty. • Easy-to-follow owner’s manual.
• Lockout Feature – Locks out tool at
• Clear safety glasses.
four nails to prevent blank firing.
• Fuel cells and fasteners sold
• Sequential Operation – Prevents
separately.
“bump-firing” tool.
415-824-4300
183
CONCRETE AND STUCCO PRODUCTS
QUIKRETE® CONCRETE ACRYLIC FORTIFIER
A water resistant acrylic resin mixture
for concrete, cement, plaster, patching,
sealing stucco, and masonry.
Provides exceptional strength when
mixed with Quickrete® cement mixes
or Quickwall®, provides non-slip
coating around pools when used with
Quickrete® sand mix. For floor leveling
and underlayment mix, Quickcrete®
with acrylic fortifier.
Size
Qty
Code
1QT
1GAL
EA
91WAD11
91WAD12
CONCRETE MIX
Size
For any general concrete work. Proper
blend of cements, sand and gravel.
Just add water.
60# 1⁄2 cubic foot
Code
91WQCCM
• Simplifies projects for do-it-your-selfers.
• Provides contractors with the
solution for many specialized jobs.
• For setting posts, building sidewalks,
steps, patios, curbs, footers, floors,
downspout troughs, etc.
FAST SETTING CONCRETE MIX
A blend of special cements, sand and
gravel. Sets hard in a few minutes.
Walk-on time is less than an hour.
Size
Code
50#
91WQCFS
• For setting posts without mixing.
Just pour (dry) into hole with
water.
• For steps or slab-setting
platforms.
• For appliances, swing sets, clothes
lines, basketball backboards, etc.
184
415-824-4300
PORTLAND CEMENT
Size
Code
47#
91WQCCE
Size
Code
MASON MIX
For laying brick, block or stone. A
blend of masonry-type cement and
graded sands. Just add water.
60#
91WQCMM
Size
Code
70#
91WQCSA
• Simplifies mixing mortar for laying
brick, block or stone.
• A long lasting, strong bonding
mortar.
ALL-PURPOSE SAND
For many uses, including traction on
snow and ice, cat litter boxes,
underlayment base for brick patios
and walks, etc.
415-824-4300
185
RAPID SET® NON-SHRINK
GROUT/CEMENT ALL™
All is so versatile it can be mixed from
a no slump (very stiff consistency) to
a high slump (very watery
consistency). This ability to be able to
mix one product to wide degrees of
slump make it appropriate for virtually
any application. Gaining outstanding
strength, this product mixed watery
will achieve 3,500PSI in one hour and
mixed stiff will achieve 6,500PSI in one
hour at 72º.
RAPID SET® MORTAR
MIX/ONE STEP STUCCO
Rapid Set Mortar Mix/One step Stucco
is Rapid Set® cement mixed with plaster
and sand. This product can be applied
as a one step stucco repair material
and is used 7⁄8” or thicker, replacing the
scratch and brown coat. It is capable of
allowing the finish (color) coat to be
applied in one hour. There is no lime
added, no bonding agent needed and
because it is non-shrink it will not
crack or pull away from the existing
stucco. It can also be used for large
flat work areas, anchoring, and deep
fills where small aggregate is needed.
This mix will achieve 2,000PSI in one
hour at 72º.
Size
Code
10#
25#
55#
91WRSG1
91WRSG2
91WRSG5
Size
Code
55#
®
91WRSMM
PIER BLOCK
Size
8”
186
Code
91WPIER
415-824-4300
REBAR/RELATED TOOLS AND ACCESSORIES
REBAR
Manufactured to ASTM
specifications for deformed
concrete reinforcing bars.
20’ lengths, grade 40.
Size
Code
⁄ ”x 2’
⁄ ”x10’
3⁄8”x 20’
1⁄2”x 20’
5⁄8”x 20’
12
12
9REBAR
9REBAR
9REBAU
9REBAR
9REBAS
REBAR CAP
Size
Orange PUC protector cap.
⁄ !–1”
38
Code
9RECAP
REBAR CUTTER/BENDER
Size
Portable tool for cutting and bending
rebar. Cutting capacity: #5 rebar.
415-824-4300
⁄ !– ⁄ ”
12
187
58
Code
9RECUT
16 GAUGE BLACK REBAR TIE WIRE
Size
31⁄2LB roll
TIE WIRE REEL (PLASTIC)
Code
9TWIRE
Code
Convenient holder for collected tie wire.
9TWIRH
QUICK TIE
Size
Use as bar tie or bag tie. Tensile range
of 45,000–60,00PSI.
6”
8”
Code
9TWIRT6
9TWIRT
QUICK TIE TOOL
Code
Used to install Quick Tie tie wire.
9TWTOL
REBAR TIE BLOCKS
Size
3”x 3”x 3”
188
Code
91WDOB3
415-824-4300
CONSTRUCTION STAKES
Size
Code
Made of 3⁄4” diameter high tensile
steel with tempered points.
90,000PSI. Ideal for use as screen
post or curb and gutter stakes.
12”
18”
24”
36”
48”
9RSTK1
9RSTK2
9RSTK3
9RSTK4
9RSTK5
FOUNDATION BOLT HOLDER
Size
Holds foundation bolts in proper
position during curing of foundation.
⁄ ” Blue
⁄ ” Pink
3⁄4” Yellow
12
58
Code
99FH04
99FH05
99FH06
HDG SQUARE WASHERS
Size
Heavy-duty, reinforcing washers.
2”x 2”x 3⁄16”
21⁄2”x 21⁄2”x 1⁄4”
3”x 3”x 1⁄4”
3”x 3”x 5⁄16”
3”x 3”x 1⁄2”
SAFETY FENCE
A low cost polymer grid developed
for temporary installations as fencing
or traffic/safety control in and around
construction sites, land fills and work
areas.13⁄8”x 11⁄4” grid.
415-824-4300
189
Hole Diameter
Code
⁄”
5⁄8”
3⁄4”
7⁄8”
1”
99SW22
99SW24
99SW30
99SW70
99SW80
12
Size
Code
4’x 100’
ZTFEN2
MOISTURE METERS
C505 CONCRETE SHOPLINE
• Provides fast initial moisture
indication.
Qty
Code
EA
ZWC505
• Easy to read LED display.
• Scans .875” x 2.5” x .5” depth.
• Ultra-compact, pocket size.
• Carrying case included.
C575 CONCRETE PROLINE
• Provides fast initial moisture indication.
Qty
Code
• Pocket size easy to read, analog meter.
EA
ZWC575
Qty
Code
EA
ZWL606
• Scans 1.5” x 2.5” x .75” depth.
• Quickly survey concrete.
• Battery and carrying case included.
L606 INSPECTOR PROLINE
• Scans 1.5” x 2.5” x .75” depth.
• Measures moisture content 5%-30%.
• Pocket size easy to read, analog meter.
• Species adjustment table.
• Quickly scans whole boards.
• Battery and carrying case included.
190
415-824-4300
MOISTURE METERS
L607 DUAL DEPTH PROLINE
• Scans 1.5” x 2.5” x .5” depth.
• Measures moisture content
5%-30%.
Qty
Code
EA
ZWL607
Qty
Code
EA
ZWL609
Qty
Code
EA
ZWT100
• Read waterbone finish
applications.
• Pocket size easy to read, analog
meter.
• Battery and carrying case
included.
L609 SHOPLINE
• Scans .875” x 2.5” x .75” depth.
• Ideal for hard, soft, imported
species.
• Ultra-compact, easy to read
LED display.
• Carrying case included.
• Measures moisture content
4%-22%.
HYDRO-THERMOMETER CLOCK
• Ideal for desktop or wall.
• Designed for jobsites, factories,
offices.
• Affordable, professional.
• Monitors time, temperatures,
humidity, records extremes.
415-824-4300
191
ELECTRICAL
ADAPTERS
Code
• Industrial jobsite quality.
locking connector to U-ground, 12/3, STW
ZA1985
Code
Adapter—Male UX/Female U Ground
ZA1986
Code
3-outlet power block, 12/3, STW
U-Ground
ZA1987
Code
3-outlet power block, 12/3, STW
Twist to U-Ground
ZA1988
Code
Locking connector, “Y” adapter, 12/3, STW
ZA1989
U-ground, “W” adapter, 12/3, STW
ZA1990
Code
Code
Locking connector, “W” adapter, 12/3, STW
192
ZA1991
415-824-4300
ELECTRICAL
ADAPTERS
Code
3-outlet wild adapter
ZA1992
PVC grounding connector
ZA1993
PVC grounding plug
ZA1994
STRAIGHT BLADE CONNECTORS
Code
• Commercial specification grade
straight blade, plugs, and
connectors.
• They are moisture, chemical,
and abuse resistant.
• Indoor and outdoor use.
Code
AC QUIET SWITCHES
• Faster installation with
combination of side wiring and
quickwire push in wiring.
Style
Color
Code
Single pole
Single pole
Ivory
White
ZA1995
ZA1996
Style
Color
Code
3-way
3-way
Ivory
White
ZA1997
ZA1998
• Impact-resistant durable thermo
plastic toggle.
STRAIGHT BLADE RECEPTACLES
• Terminal screws accept up to
No.10 copper wire or copper clad
wire.
• Quick push-in terminals accept
No.14 solid copper wire only.
415-824-4300
193
Color
Code
Ivory
White
ZA1999
ZA1999A
ELECTRICAL
SPECIFICATION GRADE
THERMOSET WALL PLATES
• 1 Gang toggle switch
• 1 Gang duplex receptacle
Color
Code
Ivory
White
ZA1999B
ZA1999C
Color
Code
Ivory
White
ZA1999D
ZA1999E
VINYL EXTENSION CORDS
Size
Three conductor round orange cord.
300V, UL-Listed, meets OSHA
requirements for outdoor use. High
visibility vinyl insulation resists oil,
grease, moisture, abrasion, and
prolonged exposure to sunlight.
Heavy-duty molded-on plugs and
connectors. SJTW-A wire type, 15A
125RPM rating.
25’
50’
100’
Code
ZA1970
ZA1975
ZA1980
16⁄3
14⁄3
12⁄3
LED-LENSER TURBO TORCHES
Key Chain
Two German optoelectric engineers,
Rainer and Harold Opolka, first designed
these revolutionary NEW lighting
instruments in the late 1990’s. Seven
years and 14 patents later, LED-Lenser
“Turbo Torches” are available for the
consumer market from Coast. By
employing State-of-the-art computer chip
technology, these unique lighting
instruments provide a higher level of
energy efficiency and greater brightness
than conventional lights.
Qty
Code
EA
ZA1999F
Qty
Code
EA
ZA1999G
V2 TRIPLEX
• 3 spot power beam
• 100 hrs. of light without
a battery change
• 3 Photon tube Reflectors
• 3 Diode-charged systems
• 5 7/16 in. length
• Includes sheath
194
415-824-4300
STAIR TOOLS
RAIL BOLT INSTALLER
(A) Conect-A-Kit: Locates 1/4” Dia. pilot
hole on handrails and rail drops for
attaching to Conect-A-Kit fittings and
easements. The T-92 is also used to
assemble Conect-A-Kit fittings.
Qty
EA
Code
6S9540
1. Locate and mark the 1/4” dia. lag bolt 3. Locate and mark the center of the 1”
dia. access hole on the bottom of the
pilot hole on the end of the handrail or
handrail using the 1 3/8” tabs on the
rail drop using the 1 1/8” tabs on the
installer tool. Sight the handrail
Rail Bolt Installer tool. Sight the
centerline through the hole in the
handrail centerline through the hole in
installer tool.
the installer tool.
(B) Rail Bolts: Locates holes as well as
starts and tightens hex-nut onto rail
bolt. The T-92 Drives 5/16” rail bolts
and tightens 1/2” hex-nuts.
4. Thread the rail bolt into the Rail Bolt
Installer tool. Lock the rail bolt hex-nut
against the installer tool and drive the
rail bolt into the easement pilot hole
using the installer tool as a T-Handle.
Note: use of a drill and Rail BoltRunner TM (3032) may make this an
even easier task.
2. Locate and mark the 1/4” dia. rail
bolt pilot hole on the easement and
the 3/8” dia. clearance hole on the
handrail using the 15/16” tabs on the
5. Use the socket-head end of the tool
Rail Bolt Installer tool. Sight the
to tighten the rail bolt nut up inside of
handrail centerline through the hole in
the 1” dia. access hole.
the installer tool.
RAIL BOLT-RUNNER
Drill attachment with machine threads
which drives the Rail Bolt into handrails,
fittings, newels and walls. Fits the
Chuck-Buster TM.
Qty
EA
Code
6S9545
1. With Rail Bolt-Runner TM mounted
in chuck or in the Chuck-Buster TM
(3031), start up the drill motor and
hand start the rail bolt in the runner.
2. With bolt accured in the Rail BoltRunner TM, drive the bolt to the
desired depth (usually the joint of the
two thread styles).
3. Reverse drill motor to disengage
the Rail Bolt-Runner TM.
DOWEL-RUNNER
Drill attachment with lag threads which
drives dowel screw into baluster bases.
Fits Chuck-Buster TM (3031).
Qty
EA
1. With the Dowel-Runner TM
mounted in chuck or the ChuckBuster TM (3031), start up the drill
motor and hand start the dowel
screw in the runner.
2. Now that the screw is accure in
the Dowel-Runner TM, drive the screw
to the desired depth in baluster base.
3. Reverse drill to disengage the
Dowel-Runner TM.
415-824-4300
195
Code
6S9550
STAIR TOOLS
DOWEL CENTAUR
For 11/4” and 13/4” balusters only
Qty
Centers 9/32” hole in baluster bases for
dowel screws. Fits 1 1/4” and 1 3/4”
balusters. Doubles as a drill bit guide and a
centering device.
Code
6S9555
EA
1. Push the Centaur TM over the base of
the baluster until it “seats”.
2. Use 9/32” twist drill to drill the hole
to the desired depth (make certain that
the hole is deep enough).
To change Centaur TM from 1 1/4”, simply remove the core with a twisting
motion. Centaur TM is now ready to use on 1 3/4” balusters.
3. Remove the drill bit and Centaur TM.
EZ-STAIR® STAIR BUILDING KIT
•
•
•
•
Adjustable stair brackets.
Interior stairs.
Exterior stairs.
Concrete form work.
QTY
SIZE
2EA
8EA
spacer
Code
94EZRP
94EZCB
bracket
pivot screws
stringer
QTY
EZ STAIR XTRA SPACERS
8EA
SIZE
Code
94EZC5
3 EZ STEPS INSTALLATION INSTRUCTIONS
spacer
1 . Set the brackets on the two 2 x 6
stringer members using the spacers
and pivot screws.
bracket
pivot screws
stringer
rotate
SH
PU
2 . Remove spacers and rotate
brackets to adjust stair height.
cut ends
SH
PU
3 . Fix brackets in position, attach
risers and treads.
tread
riser
196
415-824-4300
STAIR HARDWARE
TRADITIONAL
SERIES KITS
• 2 pieces of pre-drilled rail -95 /2”
1
• Set of Aluminum balusters -36”
Color
Qty
Length
Black
Green
White
EA
EA
8’
8’
8’
Color
Qty
Length
Black
Green
White
EA
32”
32”
32”
EA
Code
DBK1
DBK2
DBK3
• 1 rail to post hardware kit
• Available in powder coated finishes
• 25 year warranty
TRADITIONAL STRAIGHT
ALUMINUM BALUSTERS
Made especially for the CreativeRail
System, these aluminum balusters are
rust-free with a premium powdercoasted finish, 25 year warranty,
corrosion resistant and ACQ compatible.
These balusters are low-maintenance
because all you need to do is wipe
them clean.
EA
EA
Code
DB1
DB2
DB3
Available in two sizes to accommodate various rail heights: 26” & 32”
PRE-DRILLED PROFILED
RAILS
Qty
Length
EA
8’
Code
CR4
NO NEED TO MEASURE! Our rails are
conveniently pre-drilled for an opening
with less than 4” spacing between
balusters.
RAIL-TO-POST
HARDWARE KIT
Installing your rails to posts has
never been easier with the Rail-toPost Hardware Kit. Complete with
powder-coated aluminum brackets
and stainless steel painted screws,
these fastener will definitely save you
time and frustration. Available in
Qty
Brown
Green
4pcs / bag
4pcs / bag
Code
DB3C
DB3D
green and brown to compliment your
choice of Cedar and Treated railing.
ANGLE ADAPTERS
(PATENT PENDING)
Available in 6 colors to match
you balusters!
For stair installation, simply use
Angle Adaptors (sold separately).
No need to cut balusters, calculate
angles, or pre-drill rail. Simply snap
into place.
The Adaptors come in balustermatching colors that blend nicely
with the rail system.
415-824-4300
Color
197
Color
Qty
Black
Green
White
15pcs / bag
15pcs / bag
15pcs / bag
Code
DB1A
DB2A
DB3A
STAIR HARDWARE
TUSCANY SERIES KITS
“Grab & Go” Kits
E a c h “A l l I n O n e ” K i t C o n t a i n s :
Color
Qty
Length
Black
White
EA
EA
8’
8’
Color
Qty
Length
Black
Green
White
EA
EA
8’
8’
8’
Color
Side
Qty
Black
Black
Green
Green
White
White
Left
Right
Left
Right
Left
Right
EA
Code
DBK4
DBK6
• Top and Bottom Pre-Drilled Rails
*actual size 711⁄2” or 951⁄2”
• 20 curved aluminum balusters
• 1 Lock-Bar
• 1 Rail-to-Post Hardware Kit
• Easy to follow instructions.
TUSCANY CURVED
ALUMINUM BALUSTERS
Made especially for the CreativeRail
system, these curved aluminum
balusters are rust free with a premium
powder coated finish, 25 year warranty,
corrosion resistant and ACQ compatible.
These Balusters are low-maintenance
because all you need to do is wipe
them clean.
EA
Code
DB4
DB5
DB6
Balusters are also offered in a variety
of colors.
TUSCANY STAIR
BALUSTERS
Available are balusters designed
especially for stair applications.
Combined with Angle Adaptors, the
balusters are simple to install and will
look great with your railing system.
Stair Balusters also offered separately in
a variety of colors.
left stair
baluster
right stair
baluster
EA
EA
EA
EA
EA
Code
DB4A
DB4B
DB5A
DB5B
DB6A
DB6B
N o t e : Stand at the bottom of the stairway and look up to
determine which balusters to use. Right balusters project to the
right of the stair and left balusters project to the left of the stair.
TUSCANY LOCK BARS
Designed exclusively for the
CreativeRail: Tuscany System, these
unique, patent-pending aluminum Lock
Bars ensure curved balusters maintain
spacing code.
Color
Size
Code
Black
Green
White
1⁄3’
DB4C
DB5C
DB6C
1⁄3’
1⁄3’
Lock-Bars also offered separately in a
variety of colors for additional accents
(mix & match).
198
415-824-4300
STAIR HARDWARE
SEEMORE
Color
Seemore Architectural Balusters
Like the name implies, Rail Simple -Seemore Balusters are specifically
designed to increase the viewing area
through you railing. These beautifully
shaped balusters are simply attached
(top & bottom) to any 2x4 that you
choose, using stainless screws supplied
with the balusters. Seemore balusters
are 11/16”x31” and designed for a 26”
height railing system.
Qty
Code
Black
Pewter
EA
EA
DB7
DB8
Color
Qty
Code
RAIL SIMPLE SEEMORE Architectural
Balusters are shaped from high-quality
aluminum with a maintenance-free,
rust-free premium powder-coasted
finish and backed with a 25 year
warranty.
Available in two finishes: Textured
pewter or flat black.
VENETIAN
Black
Pewter
Venetian Architectural Balusters
Rail Simple -- Venetian Architectural
balusters are uniquely designed to
replace angle cut wooden balusters and
instantly upgrade your entire outdoor
working space. Simply leave your
existing rails and newel posts in place,
remove your angle cut balusters and
replace with RAIL SIMPLE Venetian
Architectural Balusters. These wider (1
x1/2”) and longer (42”) Venetian
Architectural balusters conveniently
cover up old wear marks and
automatically revitalize and upgrade the
look of your outdoor living space.
REAL SIMPLE Venetian Architectural
Balusters are shaped from high-quality
aluminum with a maintenance-free,
rust-free premium powder-coated finish
and backed with a 25 year warranty.
Available in two finishes: textured
pewter or flat black.
415-824-4300
199
EA
EA
DB9
DB10
INDEX
A
B
A Angles 78
Aluminized Membrane 41
Abrasive Cutoff Disc 2
Abrasive Depressed Center Wheels 2
Abrasive Grinding Wheel 2
Abrasives
Drywall Sanding Screen 1
Drywall Sanding Sheets 1
Melamine Glue 4
Production Paper Sheets 1
Sanding Belts 1
Abrasives Blades 176
Acrylic 51
Acrylic Latex 7
Acrylic Urethane 51
Adapters 192, 193
Adhesives 3
3m #90 Aerosol Adhesive 4
Contact Cement 4
Dap “230” Sealant 5
Devcon’s Trimbonder™ 7
Durock Tile Adhesive 9
Extend HD 5
Phenoseal Adhesive Caulk 5
PL 400 Heavy-Duty Sub-Floor
Adhesive 4
Quikrete No.9902 Concrete Bonding
Adhesive 8
Sikaflex-1a 6
Aerosol Adhesive 4
Air Bushings 179
Air Couplers 177, 178
Air Couplings 179
Air Fittings 177, 178
Air Gun 181
Air Hose 181
Air Impact Socket Set 161
Air Lubricating Oil 181
Air Nailer 181
Air Plugs 177, 178
Air-Line 181
Aluminum Rolls 70
Aluminum Snips 134
Anchor Bolt Holder 189
Anchor Bolt Holders 88
Anchor Bolts 26, 82
Angle Clamp 133
Angle Grinder 149
Angles and Gussets 85
Aqua Gun 131
Auger Bit 164
Aviation Snips 134
Azek Adhesive 3
Baluster Dowel Runner 195
Barrel Bolts 58
Barrier Fence 108, 189
Beam Levelers 83
Bell Hanger Bit 168
Bent Putty Knife 113
Bit Holder 167
Bit Tip 75
Bit Tips 24
Combo Bits Double Ended Bits 26
Phillips Insert Bits 26
Square Drives 26
Black Square Washers 17
Blade 114
Blade, Planer 172
Bleaching Oil 49
Blow Gun 181
Blue Tape 111
Bolt Cutters 136
Bolt-Rail Installer 195
Bolt-Rail Runner 195
Bolts
Carriage Bolts 15
Foundation Bolts 26
Machine (Hex) Bolts 14
Toggle Bolts 27
Clothes Rod Hardware 144
Collets 170
Column Cap 96
Column End Caps 91
Combination Square 121
Compact Drive Guide 167
Compass Saws 122
Compound Miter Saw 155
Concrete Bonding Adhesive 8
Concrete Additive 184
Concrete Bits 169
Concrete Float 137
Concrete Fortifier 184
Concrete Mix 184
Concrete Screws 24
Concrete Tools 137, 138
Concrete Trowel 137
Construction Apron 138
Construction Stakes 189
Contact Cement 4
Continuous Hinges 57
Coping Saw Blades 122
Coping Saws 122
Copper Green 44
Coppernate Wood Preservative 44
Copy Cut Gauge 124
Corbels 142
Cordless
Dewalt Cordless Battery 161
Dewalt DC011 Radio/Cordless
Battery Charger 157
Dewalt DC385K Reciprocating Saw
Kit W/Electric Brake 158
Dewalt DC987KA 18.0V Drill/Driver
Kit 160
Dewalt DW052K-2 12V Impact Driver
Kit 159
Dewalt DW920K-2 7.2V Pivot
Driver 157
Dewalt DW935K 14.4V Saw Kit 158
Dewalt DWDC390 18v Saw 158
Dewalt DW965K-2 12.0V Right Angle
Drill/Driver 159
Paslode Cordless Battery 182
Paslode Cordless Framing Nailer 183
Paslode Cordless Nailer 183
Cords, Extension 194
Corner Irons 56
Counter Brush 115
Coupling Nuts 18
Crayon 109
Crayon/Lumber Pencil 109
Crowbar 131
CS Coiled Straps 81
Curved Claw 128
Cut Out Tool Accessory 170
Cut-Out Tool 154
Cutting Plier 135
Wedge Anchors 27
Wedge Bolt Hex Heads 26
Bondo 11
Bondo Spreader 114
Boots 108
Bosch Blade 171
Brackets
Cast Handrail Bracket 141
Handrail Brackets 141
Pine Key Hole Corbels 142
Ponderosa Pine Shelf Brackets 142
Rail Bracket Hardware 141
Solid Brass Handrail Brackets 141
Brad Finish Nails 28
Brad Point Drill Bit 168
Bronze Wool 116
Brooms 118
Brush 115
Bucket Caddy 119
Bucket Wipes 117
Buckets 119
Builder Screws, Self-Drill 21
Building Tape 41
Bungee Cord 110
Butt Hinges 59
Butyl-Flex Caulk 4
C
Cabot
Australian Timber Oil 49
Bleaching Oil 49
Clear Solution Translucent Tones 46
Decking Stain 47
Finish 49
OVT Solid Color Acrylic Stains 48
OVT Solid Color Oil Stains 48
Problem Solver Primer 47
Semi-Solid Stains 48
Semi-Transparent Stains 48
Solid Color Decking Stain With Teflon
Surface Protector 47
Water Based Clear Solution 46
Water Proofing with Teflon 46
Wood Cleaner Brightener & Stripper 47
Cap, Rebar 187
Carbide Saw Blades 175
Carpenter Pencil 110
Carpet Protector 43
Carriage Bolts 15
Cast Handrail Bracket 141
Caulk
Alex Plus Acrylic Latex w/ Silicone 7
Black Jack Fibered Plastic Roof
Cement 7
Butyl-Flex Caulk 4
Dap Fire Stop Sealant 5
Dow Corning Silicone Sealers 6
Extend HD 5
Jiffy Seal Caulk 8
Sikaflex-1a 6
Caulking Guns 8
Caution Tape 108
CB Column Bases 80
CBA Column Bases 80
Cedar Breather 39
Cedar Foundation Vents 71
Cement 185
Cement Board Screw 25
Cement Coated 33
Ceramic 9
Chalk 109
Chalk Reel 109
Channel Lock 135
Check Point Laser Level 126
Chisels 120
Circular Saw 149
Clamp 133
Clear Wood Preservative 44
Closet Tubing 144
Clothes Pole Sockets 144
D
Dap™ “230” Sealant 5
Deadbolt 68
Dec-Klip 74
Deck Hardware 76
Deck Pedestal 76
Deck Plugs 37
Deck Tool 75
Deck-Tie Connectors 81
Decking Screws
ACQ PT LUMBER Screws 22
Builder Screws 20
Builder Screws Self-Drill/Nibbed
Head 21
Maze Zinclad Screws 22
Stainless Steal Square Drive 23
Decking Stains
Cabot Australian Timber Oil 49
Cabot Clear Solution 46
Cabot Decking Stains 47
Cabot Water Based Clear Solution 46
Penofin Ultra Premium 44
Sikkens Cetol Srd California 50
i
Deckmaster Brackets 74
Depressed- Center Wheels 176
Diamond Saw Blades 175
Dobies 188
Door Bolts 62
Door Holder 67
Door Pull 58
Door Stop 67
Double Blackraft 38
Double Ended Bits 26
Double Plaster 38
Dovetail Saw 122, 124
Dowel 36, 196
Dowel Bolt Runner 195
Dowel Centaur 196
Dowel Drill Bit 36
Dowel Runner 195
Dowels 37
Drill and Drive System Set 164
Drill Bits
Auger Bit 164
Bell Hanger Bit 168
Cut Out Tool Accessory 170
Dewalt 2513 15pc Rapid Load 165
Dewalt 2518 Rapid Load 165
Dewalt DW1969 Industrial Drill
Bit Set 162
Drill and Drive System Set 164
Hole Saw Mandrels 163
Hole Saws 163
Industrial Drill Bits 162
Industrial Round Shank Percussion
Bits 163
Masonry Bits 163
Percussion Bit 163
Power Ship Auger Bits 164
Rapid Load 6” Magnetic Drive
Guide 167
Rapid Load Compact Drive Guide 167
Rapid Load Countersink Set 166
Rapid Load Hexshank Bits 166
Rapid Load Holder 165
Rapid Load Magnetic Nutdriver 167
Rapid Load Masonry Bit 166
Rapid Load Socket Adapter 167
SDS Plus Bits 169
Spline Shank Percussion Bit 169
Trufit Drill Bit 36
Wood Boring Bits 168
Drilling Hammer 129
Drills
Dewalt DC983KA Adj Clutch
Drill/Driver Kit 160
Dewalt DW100 145
Dewalt DW106 145
Dewalt DW120K 145
Dewalt DW124 145
Dewalt DW235G 146
Dewalt DW236 146
Dewalt DW272 146
Dewalt DW965K-2 Right Angle
Drill/Driver 159
Drwall Compound 113
Drwall Knife 113
Drwall Pan 113
Drwall Sander 113
Dry Wall Anchors
E-Z Ancor 27
Heavy Duty Toggler 27
Drywall 112
Drywall Corners 72
Drywall Hammers 129
Drywall J Mold 73
Drywall Joint Knife 113
Drywall L Mold 73
Drywall Metal Trim 72
Drywall Nail 32
Drywall Sanding Screen 1
Drywall Sanding Sheets 1
Drywall Screwdriver 146
Drywall Screws 19
Drywall Tape 111, 112
DS Drywall Stop 82
INDEX
E
F
E-Z Ancor 27
Ear Muff 105
Ear Plugs 104, 105
Ear Protection 105
Edge Band Trimmer 142
Edge Guard 73
Edge Trimmer 142
Edgebanding 142
Edger 137
Elastic Stretch Cords 110
Electrical Adapters 192
Electrical Cord End 193
Electrical Switches 193
Electrical Tape 111
Electronic Belt Sander 151
End Cut 46
End Cut Solution 46
EPC Post Caps 82
Epoxy
Set Pac Epoxy-Tie Adhesive 13
Simpson ET 22 Epoxy Adhesive 13
Epoxy Brush 13
Epoxy Filler 12
Epoxy Gun 13
Epoxy Nozzle 13
Epoxy Nut 13
Epoxy Sealer 12
Epoxy Solvent 13
Expanding Foam 10
Expansion Bolt
Wedge Anchors 27
Expansion Shield 27
Extend HD Sealant 5
Extension Cords 194
Ez Stair System 77, 196
Fast Setting Concrete Mix 184
Fast-Dry Primer 52
Fasteners
Carriage Bolts 15
HDG Square Washers 17
Hot Dipped Galvanized 17
Lag Screws 16
Machine (Hex) Bolts 14
PHEINOX™ Screws 25
Fastner Bit 168
Felt Paper 39
Fiberglass Hammers 128
Fiberglass Mesh 111
Fill Caulk
Fill Stick 11
Finish Nails 28
Cordless Paslode Finish Nails 30
Finish Screw 75
Finish Screws 21
Finishing Screws, Stainless Steel 21
Fire Retardant 45
Fire Retardant Wood Coating 45
Fire Stop Sealant 5
First Aid Kits 108
Fixall 10
Flash Light 127
Flashing
Aluminum Rolls 70
Paper Window Flashing 40
Polyflash Window Flashing 40
Flat Corner Irons 56
Flat Washers 17
Flexible Metal Corner Tape 112
Foam 9, 10
Foam Insulation 10
Foam Paint Brush 115
Hangers 86, 87, 88, 94
Hard Hats 104
Header Hangers 84
Heavy Duty Toggler 27
Hex Bolts 14
Hex Key 136
Hex Lag Screw 16
Hex Nuts 17
Hinge Hasps 58
Hinges 57, 59, 61, 63
Holdowns 85, 90
Hole Saw Arbors 163
Hole Saw Mandrels 163
Home Slicker 39
Hook & Loop Sanding Discs 2
Hose Nozzle 131
House Numbers 57
HouseWrap 40
Hurricane Ties 84
Foam Roller 116
Foam Sealants 10
Form Ties 96
Foundation Anchors 83
Foundation Bolt Holder 189
Foundation Bolts 26
Foundation Plate 95
Foundation Vents 71
Framer 128
Framer Screws 73
Framing Anchors 78
Framing Nailer 181
Framing Saw 148
Duct Tape 111
Durock Mesh Tape 112
Durock Screws 25
Dust Control 35
Dust Pans 118
G
H
Galvanized Hanger Strap 57
Garbage Bags 37
Garden Hose 130
Gate Fixer 60
Gate Hardware 61
Gate Hinges 60, 61
Gate Latches 60
Gate Lock 61
Gatemate 61
Gloves
Cotton Gloves 106, 107
Double Palm Glove 106
Leather Drivers’ Gloves 105
Leather Palm Gloves 105
PVC Coated Gloves 107
String Knit/Rubber Coated Glove 106
Vinyl Disposable Gloves 106
Glue
3m #90 Aerosol Adhesive 4
Gorilla Premium Glue 3
Waterproof Titebond II Wood Glue 3
Waterproof Titebond III Wood Glue 3
Goggles 103
Gorilla Glue 3
Gravel Stop 69
Green Wood Preservative 44
Grinder Back-up Pad 2
Grinding Wheel 176
Grip Locking Pliers 133
Groover 138
Grout 186
Gun Brad 28
Gun Nails
Cordless Paslode 30º Framer Nails 28
Cordless Paslode Finish Nails 30
I
J
K
L
Hacksaw 123
Hammer (Electric) 151
Dewalt D25203K SDS Hammer 151
Dewalt D25550K Rotary Hammer
Kit 151
Hammer Holder
Nylon Hammer Holder 140
Swivel Hammer Holder 139
Hammer Tacker 137
Hammers
All Steel Ripping Hammers 129
Compo-Cast Standard Head Models
Soft Face Hammers 129
Drywall Hammers 129
Hand Drilling Hammer 129
Sledge Hammer 129
Swivel Hammer Holder 139
Vaughan California Framer 128
Vaughan Fiberglass Hammers 128
Vaughan Ripping Straight Claw
Hammer 128
Vaughan’s Vanadium Claw Nail
Hammer 128
Hand Cleaner 117
Hand Sander 113
Hand Saw 123
Hand Wipes 117
Handrail Brackets 141
Handvac Drywall Sander 112
ii
Mason Mix 185
Masonry Bits 125, 163
Masonry Blade 175
Masonry Cut-Off Disc 2
Mastic 8
Max Straps 110
Maze Plastic-Hed Yellow Cap Nails 33
Measuring Tape 125
Membrane 41
Membrane Primer 42
Metal Closet Rod 144
Metal Cut-Off Disc 2
Metal Cutting Snip 134
Metal Riser 77
Metal Stakes 189
Metal Stud Screw 24
Metal Studs 73
Metal Track 73
Meters 190, 191
Mildew Solution 55
Miller Trufit Dowels 36
Mineral Spirits 53
Miter Box 124
Miter Saw 155
Miter Clamp Kit 134
Moisture Barrier 38, 41
Moisture Meters
C505 Concrete Shopline 190
C575 Concrete Proline 190
Hydro-Thermometer Clock 191
L606 Inspector Proline 190
L607 Dual Depth Proline 191
L609 Shopline 191
Mold Inhibitors 54
Moldex Mold Inhibitor 54
Mortar Mix/One Step Stucco 186
Mud Pans 113
Impact Driver Kit 125, 159
Impact Wrench 147
Insert Bits
Combo Bits Double Ended Bits 26
Insulating 9
Insulation Netting 38
Insulation Supports 87
Interior Finish 51
Interior Stain 50
Ipé Clip 75
Jack Saw 123
Japanese Back Saw 123
Japanese Hardwood Saw 123
Jig Saw 148
Jig Saw Blades 171
Joiner Plate Biscuits 161
Joint Compound 113
Joist Cap 70
Joist Locator 126
N
Knee Pads 104
Knife 114
Kraft Paper 38
L Metal 70
Lag Bolts 16
Lag Screws 16
Lag Shields 27
Laser Level 126
Latches 60, 62, 63, 64, 65
Latex Brush 115
Level It Deck System 76
Leveling Compound 9
Levels 120
Light Sloped/Skewed U Hangers 87
Line Level 120
Linemen’s Plier 135
Liner, Paint 117
Loads 34
Locking C-Clamps 132
Locks 61, 62, 67, 68
Long Nose Pliers 135
Lubricating Oil 176
Lumber Pencils 110
M
Machine Bolts 14
Magnetic Drive Guide 167
Magnetic Nutdriver 167
Malleable Washers 18
Marine Finish 51
Marking Paint 53
Mason Line 109
O
Nail Bag 138
Nail Pouch 140
Nail Pullers 131
Nail Stoppers 89
Nailers 180, 181, 183
Nails 88
Box 30
Bright Duplex/Scaffold 31
CC Ringshank 33
Common 30
Concrete 32
Cordless Paslode 30º Framer Nails 28
Dritite Cup Head 32
Finish 30
Furring Stucco Nail 34
Galvanized Roofing 33
Joist 31
Maze Casing Nails 30
Maze Hardboard (Box) 31
Maze Plastic-Hed Cap Nails 33
Maze Roofing 33
Maze Spiral Decking Nail 32
Maze Splitless Siding 31
Power Actuated Pin and Washer
Assembly 34
Power Actuated Pins 34
Stainless Siding Ring Shank 32
Stainless Spiral Decking 32
Vinyl Sinker 31
Wire Brads 34
Netting 38
Nippers 133
Non-Shrink Grout/Cement 186
Numbers 57
Nutdriver 167
Orbit Palm Sander 150
INDEX
P
Pad Bolts 62
Pad Locks 67
Paddle Bit 161
Paint
B-I-N Primer-Sealer Stain-Killer/Bond
Coat 52
Bull Eye 1-2-3/Primer-Sealer
Stain-Killer/Bond Coat 52
Cabot Finish 49
Cabot Problem Solver Primer 47
Marking Paint 53
Perma-White/Mildrew-Proof Interior
Wall & Trim Paint 52
Zinsser Spray Primer 53
Paint Brush 115
Paint Buckets 119
Paint Pourer 119
Paint Roller 116
Paint Roller Tray 117
Paint Scraper 114
Paint Thinner 53
Painters Tape 111
Palm Grip Sander 150
Palm Nailers 181
Pan Framer Screws 24
Pant Tray 117
Paper Drywall Corners 72
Paper Window Flashing 40
Particle Board Screws 20
Particle Mask 103
Patch Additive 9
Pencil 110
Penofin 44
Percussion Bits 163
Phillips Insert Bits 26
Pick 130
Pier Block 186
PL 400 Sub-Floor Adhesive 4
Plane Tool 127
Planer 156
Planer Blade 172
Planer Kit 154
Plaster Paper 38
Plaster Patching 10
Plastic Putty 10
Plastic Sheeting 37, 119
Plate Joiner Kit 155
Plate Straps 89
Plate Washers 17, 189
Plates, “T” 56
Pliers
Channel Lock 9” Iron Worker
Pliers 134
Channel Lock Cutting Plier 135
Channel Lock Linemen’s Plier 135
Channel Lock Long Nose Pliers 135
Channel Lock Tongue and
Groove Pliers 135
Plugs 37
Plumb Bob 122
Plumbers Tape 57
Plunge Router 124, 152, 153
Pole Sander 112
Poly Sheathing 119
Poly Sheeting 37
Poly Tarps 37
Poly Trash Bags 37
Poly Window Flashing 40
Post Bases 79, 89, 92, 97, 99, 100
Post Caps 78, 79, 82, 89, 97, 99, 100, 101
Post Caps/Bases 79
Post Hole Digger 130
Post Standoff 79
Pouches
Nylon Nail Pouch 140
Nylon Tool Pouch 139
Nylon Work Belt 140
Power Actuated Pin & Washer Assembly
34
Power Actuated Pins 34
Power Loads 34
Primer-Sealer Stain-killer 52
Production Paper Sheets 1
Protection Film 43
Protecto-Tak Spray Adhesive 43
Pry Bar 132
PSA Cloth Discs 2
Pump Sprayer 49
Putty 11
Putty Knife 113
Q
R
Quick Grip Bar Clamp 133
Quick Square 121
Quick Tie 188
Quick Tie Tool 188
R.C. Channel 73
Rafter Squares 121
Rafter Vents 72
Rags 118
Rail Bolt Installer 195
Rail Bolt Runner 195
Rail Bracket Hardware 141
Railroad Pick 130
Rain Boots 108
Rain Suit 107
Rapid Load Countersink Set 166
Rapid Load Drill Bit Sets 165
Rapid Load Hexshank Bits 166
Rapid Load Holder 165
Rapid Load Masonry Bit 166
Rasp, 4-in-1 135
Ratan Asphalt Paper 38
Ratchet Screw Driver 136
Rebar 187
Rebar Cutter/Bender 187
Rebar Tie Blocks 188
Reciprocating Saw 147, 148, 158
Reciprocating Saw Blades 171
Red Rosin Sheathing Paper 38
Redwood Foundation Vents 71
Redwood Rectangular Vents 71
Resin Fiber Disc 2
Respirator 103
Respirator Cartridges 103
Ring Shank Nail
Maze Hardboard (Box) 31
Maze Splitless Siding 31
Stainless Siding Ring Shank 32
Ripping Bar 131
Ripping Hammer Straight Claw 128
Riser 77
Rod Hardware 144
Roller 116
Roller Covers 117
Roller Tray Liner 117
Roof Cement 7
Roof Patch 7
Rope 110
Rotary Hammer Kit 151
Round Mini Vents 72
Router 124, 152, 153
Router (Plunge Type) 152, 153
Router Bits
Carbide ”V” Grooving Bits 173
Carbide Beading Bits 173
Carbide Classical Bits 174
Carbide Core Round Nose Box Bits 173
Carbide Corner Rounding Bits 173
Carbide Cove Bits 173
Carbide Mortising Bits 172
Carbide Ogee Bits 174
Carbide Portable Tool Laminate Trim
Bits 172
Carbide Rabbeting Bits 174
Carbide Roman Ogee Bits 174
Chamfer Bits 174
Dovetail Bits 174
Laminate Trim Bits 172
Panel Pilot Bits 172
Straight Bits 172
Rubber Backing Pad 2
Rubber Base Primer 42
Rubberized Asphalt Membrane 41
S
Safety Fence 108, 189
Safety Glasses 104
Sand 185
Sander
Handvac Drywall Sander 112
Pole Sander 113
Sanders
Dewalt DW411K Palm Grip
Sander 150
Dewalt DW420 Random Orbit Palm
Sander 150
Dewalt DW421 Random Orbit Palm
Sander 150
Dewalt DW431 Electronic Belt
Sander 151
Dewalt DW433 Variable Speed Belt
Sander 151
Sanding Back-Up Pad 2
Sanding Belts 1
Sanding Discs
Hook & Loop Sanding Discs 2
Resin Fiber Disc 2
Sanding Sponge 1
Sandpaper 1
Sash Cord 56
Sash Lock 56
Sash Rope 57
Saw Blades
Carbide Saw Blades 175
Dewalt Bi-Metal Deep Cut Hole
Saws 163
Dewalt High Performance Masonary
Blade 175
Industrial Abrasives Blades 176
Industrial Abrasives DepressedCenter Wheels 176
Industrial Dry Cut Diamond Saw
Blades 175
Sawhorse 124
Saws
Compass Saws 122
Coping Saw Blades 122
Dewalt DC385K Reciprocating Saw
Kit W/Electric Brake 158
Dewalt DW303MK Reciprocating
Saw Kit 147
Dewalt DW321K Jig Saw 148
Dewalt DW364 Heavy-Duty Circular
Saw 149
Dewalt DW378G High Torque
Framing Saw 148
Dewalt DW705S Miter Saw 155
Dewalt DW708 Compound Miter
Saw 155
Dewalt DW744S Table Saw 156
Dewalt DW935K Cordless Saw
Kit 158
Dewalt DWDC390 18v Cordless
Circular Saw 158
High Tension Hacksaw 123
Jack Saw 123
Japanese Back Saw Rubber Grip 123
Japanese Hardwood Saw 123
Professional Dovetail Saw 122
Scrapers 114
Screw 75
Screw cover caps 19
Screwdriver
Best Way Tools 4-in-1 136
Lutz 15-in-1 Ratchet Screw
Driver 136
Screwdriver Kit 157
Screws
ACQ PT LUMBER Screws 22
Builder Screws 20
iii
Builder Screws Self-Drill/Nibbed
Head 21
Concrete Screws 24
Drywall Screws, Fine Thread 19
Drywall Screws, Self-Drill 19
Durock Screws 25
Finish Screws 21
Hex Head Screws 24
Pan Framer Screws 24
PHEINOX™ Screws 25
Stainless Steal Square Drive 23
Tapping Screws, Flat Head Phillips &
Pan Head Phillips Zinc Plated 23
Wood Screws, Flat Head Phillips &
Round Head Slotted 23
SDS Bits 169
Sealants
Dap Kwik Foam Insulating Sealant 9
DOW GREAT STUFF® Big Gap Filler
Sealant 10
DOW GREAT STUFF® Gaps & Cracks
Sealant 10
DOW GREAT STUFF® Window &
Door Sealant 10
Extend HD 5
Lexel 6
Protecto Sealant 25XL 7
Sikaflex-1a 6
Self Brackets 142, 143, 144
Self-Adhesive 111
Sheathing Clips 90
Sheet Metal Shears 134
Sheet Rock Compound 113
Sheet Rock Mud Pan 113
Sheet Rock Sander 112
Shelf Bracket 56, 144
Shelving
Closet Tubing 144
Clothes Pole Sockets 144
Clothes Rod Hardware 144
Shelf Bracket with Adjustable Clothes
Pole Support 144
Shovel 130
Siding Stain 48
Cabot OVT Solid Color Acrylic Stains In
Unlimited Custom Colors 48
Cabot OVT Solid Color Oil Stains 48
Cabot Semi-Solid Stains 48
Cabot Semi-Transparent Stains 48
Sikkens
Interior Clear 50, 51
Interior Stain 50
Marine Satin Finish 51
Srd California 50
UV Interior 51
Wood Conditioner 51
Silicones
Simpson
A Angles 78
A34/A35 Framing Anchors 78
AC/LPC Post Caps 78
Adjustable Post Bases 79
Aluminum Post Standoff 79
BC Post Caps/Bases 79
CB Column Bases 80
CBA Column Bases 80
Column Bases 98
Column Cap 96
CS Coiled Straps 81
Deck-Tie Connectors 81
Double Shear Joist Hangers 98
DS Drywall Stop 82
EPC Post Caps 82
Floor Beam Levelers 83
Foundation Anchors 83
H Seismic and Hurricane Ties 84
HDA Holdowns 85
HH Header Hangers 84
HL Heavy Angles and Gussets 85
INDEX
Holddowns 98
HU Face Mount Hangers 86
HUC Face Mount Hangers 86
HUS Face Mount Hangers 86
IS Insulation Supports 87
LSSU Light Sloped/Skewed U
Hangers 87
LU Face Mount Hangers 87
LUS Face Mount Hangers 88
Monkey Paw Anchor Bolt Holders 88
Nail Stoppers 89
PB Post Bases 89
PC Post Caps 89
Plate Straps 89
Plywood Sheathing Clips 90
Predeflected Holdowns 90
Regular Post Bases 97
Reinforcing and Skewable Angles 90
Reinforcing Angle 97
Rotated Column End Caps 91
SSTB Anchor Bolts 82
Staircase Angles 98
Standoff Post Bases 92, 97
Strap Ties 92
SUR/SUL Skewed 45º Hangers 93
T and L Strap Ties 93
Tension Ties 94
Tie Plates 94
TS Twist Straps 93
U Face Mount Hangers 94
Universal Foundation Plate 95
Wall Bracing 95
WI Wedge 96
WT Wedge Form Ties 96
Single Cylinder Deadbol 68
Skewable Angles 90
Skewed 45º Hangers 93
Sledge Hammer 129
Snips 134
Socket Adapter 167
Soffit Continuous Vent 72
Soft Face Hammers 129
Solid Brass Handrail Brackets 141
Solvent 13
Sound Channel 73
Spackle 9
Spade Bit 161
Spiral Decking Nail 32
Spline Shank Percussion Bit 169
Spray Paint 53
Springs Clamp 133
Square 121
Square Drives 26
Square Washers 189
Stain Blocker 52
Stainless screw 75
Stains
Deftoil Marine Teakwood Finish 55
Jel’d Stains/Wood Kote 54
Penofin ultra premium 44
Stair Balusters 197
Traditional Straight Aluminum
Balusters 197
Tuscany Stair Balusters 198
Stair Brackets 77, 196
Stair Building Accessories 196
Angle Adaptors 197
Dowel Centaur 196
EZ-Stair XTRA Spacers 196
Pre-Drilled Profiled Rails 197
Rail-To-Post Hardware Kit 197
Tuscany Lock Bars 198
Stair Building Kits 197
EZ-Stair Stair Building Kit 196
Seemore 199
Traditional Series Kits 197
Tuscany Series Kits 198
Venetian 199
Stair Edge 125
Stair Gauge Set 121
Stair Riser 77
Staple Gun 136
Staples 137
Vapor Screening 39
Vents
Cedar Foundation Vents 71
Flat Wood 71
Louvered 71
Plastic 71
Plywood Vent 72
Rafter Vents 72
Redwood Foundation Vents 71
Redwood Rectangular Vents 71
Round Mini Vents 72
Soffit Continuous Vent 72
Stucco 71
Stucco Vent 72
Vise Grip Pliers 132
Vise Locking Pliers 132
Star Bit Tip 24
Star Drive Screws 25
Steel Wool 116
Straight Blade Connectors 193
Straight Blade Receptacles 193
Strap Hinges 59
Strap Ties 92
Stratton Bracket 75
String 109
Stringer 77, 196
Stucco 186
Stucco Corner 69
Stucco Netting 38
Stucco Stop 69
Stud Sensor 126
Suit 107
Superbar 132
Support Belts 104
Sweeping Compound 118
Switches 193
T
U
V
W
Wall Bracing 95
Wall Plates 194
Washer Nail 34
Washers 17
Water Proofing 46
Water-Based Primer 52
Waterproof Membrane 41
Waterproof Titebond II Wood Glue 3
Waterproof Titebond III Wood Glue 3
WD40 176
Wedge Anchors 27
Wedge Bolt Hex Heads 26
WI Wedge 96
Window Scraper 114
Window Tape 41
Winged Bolts 27
Wire Brads 34
Wood Bleach 53
Wood Boring Bit 164
Wood Boring Bits 168
Wood Cleaner 47
Wood Epoxy
Restor-It Epoxy Filler 12
Restor-It Epoxy Sealer 12
Wood File 135
Wood Filler
Bondo All Purpose Wood Filler 11
Goop-On 11
Wood Finish 55
Wood Floats 137
Wood Miter Box 124
Wood Oil 55
Wood Patch 11
Wood Preservative 46, 55
Wood Preservatives 12
Bora-Care® 12
Wood Putty
Color Fill Kit 11
Color Putty 11
Star Fil-Stik 11
Wood Patch 10
Wood Restoration
Restor-It Epoxy Sealer 12
Wood Screws 23
Wood Shelf Bracket 142
Wood Stain 54
Wood Veneer 142
Wooden Dowel 36
Wool, Steel 116
Work Belt 140
T and L Strap Ties 93
T Bevel 121
T Hinges 60
Table Saw 156
Tapcon Screw 24
Tape
Caution Tape 108, 111
Drywall Tape 111, 112
Duct Tape/All Purpose 111
Durock Mesh Tape 112
Electrical Tape 111
Flexible Metal Corner Tape 112
Painters Tape 111
Tape Measure 125
Tape Measure Holder 138
Taping Knife 113
Taping Mud 113
Tapping Screws 23
Tension Ties 94
Thickness Planer 156
Threaded Rods 18
Throw Away Brush 115
Tie Wire 188
Tie Wire Reel 188
Tile Adhesive 9
Toggle Bolts 27
Toggle Switches 193
Tongue and Groove Pliers 135
Tool Bag 140
Tool Belt
Leather Control Tool Belt 139
Nylon Control Tool Belt 139
Torpedo Levels 120
Torx Bit 75
Transparent Coating 50
Trim Head Screw
Finish Screws 21
Trowel 138
Trowels 137
Trufit Drill Bit 36
TS Twist Straps 93
Twine 109
Twisted Nail 32
Two Part Epoxy 13
Urethane Clear Finish 55
Utility Knife 114
Utility Knife Blades 114
Y
Z
Vapor Barrier
Cedar Breather 39
Double Blackraft 38
Ratan Asphalt Paper 38
Typar HouseWrap 40
Vapor Barrier Tape 40
iv
Yardstick 125
Z Bar 69
Zip Bit 161
Zipwall 35
ZMAX 97
Double Shear Joist Hangers 98
Post Caps 97
Regular Post Bases 97
Reinforcing Angles 97
Staircase Angles 98
Standoff Post Bases 97

supplying the bay area with the finest building

Transcription

Similar documents

Part 1 - Serpo.org

Item 64-0127

Saebo Long Term Care Program

Item 64-0126

The Caledonian Society of Cincinnati`s

Saebo Evaluation and Treatment Kit

NCLI Merchandise - Pheasants Forever

BEVEL EDGE RUBBER FLOOR MAT PinEAPPLE CORER ROUnD

K-CUPS $15/BOX OF 12

EXPORT