dc portable ac/dc tig welder

INVERTER
PORTABLE AC/DC TIG WELDER
2
4
3
5
1) TIG Current Pulse Function
6
2) Voltage Reduction Device Indicator
3) AC / DC Mode Selection Button
4) Remote Current and Contactor
Functions
1
5) Multifunction Control Knob for
Amperage and Parameter Control
6) Process Selection Buttons
7) 8 Pin Torch / Remote Socket
8) 50mm DINSE Terminals
9) 3/8 BSP Gas / Power Connection
10) TIG Mode Functions Button
7
10
9
8
AC
CC
DC
DC
CV
1
200
1
PHASE
PHASE
AMP
WARRANTY
WARRANTY
DUAL
230DUAL1CC CC
200
3
CC DUAL
VOLTAGE
CC
230
200
230
V230
AMP 175
CV 1 3
ACDC
YEARS
230/115V
VOLTAGE
VOLTAGE
PHASE
V
DC230/115V
PHASE
CV V
YEARS
V CV
AMP
AMP
CV
230/115V
DUAL
180
VOLTAGE
WARRANTY
2
AMP
230/115V
YEARS
WARRANTY
3
YEARS
200 AC/DC H F tig In ver ter :
The Thermal Arc ArcMaster 200 AC/DC is a full digital control, AC/DC, Stick/ Lift TIG/ HF TIG inverter power supply with a high
output and expanded input voltage capabilities for maximum user flexibility. Standard features include: High frequency start, lift
TIG start, up/ down slope, pulse, repeat (latch) function, spot timer, Job Save & Load and VRD.
This is the ultimate unit designed for precision TIG and Stick welding of all weldable materials. Superior, true square wave output combines with highly developed balance and cleaning features to deliver an unbeatable welding performance with extended
tungsten life on aluminum and magnesium alloys without the need for continuous high frequency.
M ach ine F eatures :
Excellent Performance!
Embedded microprocessor with digital controls, delivering
perfectly smooth, stable arc characteristics for low hydrogen
electrodes.
Lift Start TIG! Provides TIG arc starting without use of high
frequency.
Smart Logic® ! Eliminates damage to the internal components if
installed to improper voltage.
HF Arc Starting! Provides non-contact arc starting that
eliminates tungsten or material contamination.
Thermal Overload Protection! Alerts the operator if the duty
cycle is exceeded or airflow is blocked.
True square wave output!
Highly developed balance and cleaning features deliver an
unbeatable welding performance with extended tungsten life on
aluminum and magnesium alloys without the need for continuous
high frequency.
Remote Receptacle Fitted! Allows remote devices to be
connected for controlling amperage and output contactor.
Integrated VRD! Voltage Reduction Device reduces the OCV when
the power supply is not in use. This all but eliminates the risk
of electric shock to the operator from the secondary welding
circuit.
Job Save & Load! Allows operator to store up to 5 exact optimized
welding parameters then digitally recall them with perfect
repeatability.
Smart Warning Diagnostics! Alerts operator to power supply
abnormalities.
Hot Start! For easy arc starts when STICK welding.
AC Frequency! Gives the operator control over weld bead shape.
AC Balance! Allows you to fine tune the AC welding cycle.
Rapid pulse output! Provides precision control over pulse on/off,
pulse frequency, peak % time, background and peak amperage,
initial and final slope times, and amperage.
Intelligent heat sensing fan!
Operates as needed to cool components & reduce airborne
contaminants pulled through the power source.
M ach i n e S p e c i f i ca t i o n s
Ordering Information
Type: Constant Current
Maximum Output
Arcmaster 200 AC/DC with manual,
10-3099
primary cable and TIG plug
Remote Foot Control with 7.6m lead & plug
10-4016
Remote Hand Pendant with 7.6m lead & plug
10-4014
Plug for remote / TIG Torch
10-9811
SA.26.4 TIG Torch with 4m lead
304.090.404
Universal Trolley020212/SA
Welding Amperage Range
Rated Output: Stick 230V
TIG 230V
Maximum OCV Volt/DC
Power Source Dimensions:
(H x W x D)
Power Source Weight
Warranty
AC/DC Stick & HF TIG Welder
200A
DC TIG
5-200A
AC TIG
10-200A
DC STICK 5-160A
AC STICK 10 - 160A
160A / 26.4V @ 40%
200A / 18V @ 20%
65V
360mm x 180mm x 420mm
17 kg
3 Years
P r i ma r y P o w e r
Primary Voltage
Hertz
Phase
Protection Class
Approvals
220-230V
50/60 Hz
1 PH
IP23S
EN 60974-1
Thermadyne UK Tel: (44) 1257 261755 Fax: (44) 1257 224800
Thermadyne Italia Tel: (39) 02 36456801 Fax: (39) 02 36456840
www.thermalarc.com
Form No. 200ACDC (15/02/2011) Europe
© 2011 Thermadyne Industries, Inc.
www.thermadyne.com