Insultherm Sleeves - Electronic Fasteners

EXTREME
T E M P E R AT U R E
Insultherm Sleeves
Double Wall Fiberglass
Sleeves Protect Wires &
Spark Plug Boots to 1,2000 F
For years, Techflex’s Insultherm braided fiberglass sleeving has been the
first choice among automotive professionals and enthusiasts alike for many of their
thermal protection applications.
Now, we’re introducing the same high temperature protection in an easy slip on
• Economical, Long
sleeve that will extend the life of expensive spark plug wires by protecting them
Lasting Protection
where they need it most... at the boot. Just slip these 3/4” diameter double thickness (triple thick at the sewn end) sleeves over any spark plug cable and boot (even • Easy, Slip On
right angle boots) to protect them from engine temperatures in excess of 1,2000F.
Installation
Once installed, the sleeves require no clearance from hot surfaces, and can even • Protects Up To
rest directly on hot exhaust headers without any effect.
1,2000F.
Insultherm Spark Plug Boot Sleeves (FG) are completely non-conductive, resist all
engine chemicals, will not support combustion, and provide an easy, economical
solution to the challenge of wire protection in the cramped, high temperature environment of any high performance engine compartment.
• Halogen and
Asbestos Free
• Resists Gasoline and
Engine Chemicals
6”
7 1/2”
12”
FBN0.75
FCN0.75
FDN0.75
Diameter
3/4”
3/4”
3/4”
Bulk
Minimum
Wall
Thickness
.085
.085
.085
72 ea.
Special Order
In Stock
Special Order
Available
Colors
Bla
c
BK k
Part #
Re
RD d
Length
Blu
BL e
Insultherm Spark Plug Boot Sleeves are available
in retail packaging as part of Techflex’s exclusive
“Double Yellow” performance products line.
Na
tu
NT ral
Insultherm Spark Plug Boot Sleeves can rest
directly on hot headers and other engine
components without burning, melting or
becoming brittle.
7 1/2 “ Natural is an instock item. All other combinations are special order.
Please contact your Account
Rep for details.
800 323-5140
www.techflex.com
23