DELUXE KITCHEN

DELUXE KITCHEN
ASSEMBLY INSTRUCTIONS
ITEM #2607
Version B
12/07
Melissa and Doug, Inc.
© 2006
All Rights Reserved
We care about your comments.
Please call us! 1-800-284-3948
DELUXE KITCHEN
Our exclusive Color Dot
Matching system makes
assembly easier!
Colored Dot
Colored Dot
Simply find the parts you need to
assemble and match the same
colored dots found on each part.
The colored dots will ensure that
the parts are in the proper
position.
When positioned correctly,
the colored dots will face
each other as you assemble
the parts and be hidden
after the parts are
fastened securely.
Please Note - All parts are numbered in the
order of their assembly, so it would be easier
to lay out the parts in numerical order before
you begin.
ITEM #2607
DELUXE KITCHEN
How to correctly install
Barrel Nuts
Press a Barrel Nut into the hole in the part
making sure that the "+" pattern is facing up.
Properly aligned
Barrel Nut.
"+" pattern
The Barrel Nut may look
like this - which is not
straight with the hole at
the edge for the Hex
Screw.
ITEM #2607
Hole for
Hex Screw
Using a standard screwdriver, turn
the Nut until the "+" is straight so
that the threaded hole is facing
outward to accept the Hex Screw.
DELUXE KITCHEN
PARTS
pg 1 of 2
1
One of each part shown
except for part #8
Center
Support
Left
Fridge
Right
Oven
3
4
2
Base
5
Right
Kitchen
Left
Kitchen
7
6
Fridge
Shelf
8
Front
Support
Under
Sink
Back
Oven
Back
x2
Oven
Shelf
12
11
10
Counter
Top
9
Fridge
Back
16
Upper
Shelf
15
18
Upper
Back
17
Sink
Backsplash
Upper
Center
20
Fridge
Top
Top
Shelf
21
19
Fridge
Door
Range
Panel
23
ITEM #2607
Oven
Door
Microwave
Door
Sink
Panel
Freezer
Door
31
30
24
25
Turntable
28
29
Cabinet
Door
Sink
32
34
DELUXE KITCHEN
PARTS
26
pg 2 of 2
22
Range
Knob
Sink
Knob
Door
5
Latch pcs
Plate
Door
Latch
5
pcs
14
13
4
pcs
27
2
pcs
Sink Faucet
1
pc
Screws and nuts shown
actual size
Door
Handle
5
pcs
33
Machine
Screw
(4x9)
Hex Key
1
pc
ITEM #2607
Barrel
Nut
45 pcs
Package J
Door
Hinges
10
pcs
40 pcs
Package F
Machine
Screw
(4x21)
10 pcs
Package E
Hex
Screw
(6x15)
1 pc
Package D
Cap
Nut
8 pcs
Package H
Wood
Screw
20 pcs
Package G
Hex
Screw
(6x25)
4 pcs
Package C
Please note that some screws and hardware may
be supplied with extra pieces.
Hex
Screw
(6x37)
3 pcs
Package B
Hex
Screw
(6x44)
45 pcs
Package A
DELUXE KITCHEN
STEP 1
Check when Done
To part #1, assemble parts #2, #3,
#4 and #5 using 2 hex screws(A) and 2
barrel nuts(J) for each part.
5
Use the colored dots to align the
connecting panels.
4
Yellow
Dot
3
Blue
Dot
Typical Screw & Nut Assembly
Colored Dot
Green
Dot
Blue Dot for
step 2
2
Hex Screw
Red Dot for
step 2
Red
Dot
Barrel Nut
1
Fasteners used in this step
8 Barrel Nuts
Package J
ITEM #2607
Full Size
8 Hex Screws
Package A
Assembled View
DELUXE KITCHEN
STEP 2
Check when Done
Assemble part #6 using 4 hex
screws(A) and 4 barrel nuts(J).
Then assemble part #7 with 2 hex
screws(A) and 2 barrel nuts(J).
Be sure to use the colored dots for
proper alignment.
Typical Screw & Nut Assembly
Colored Dot
Red
dot
Hex Screw
Barrel Nut
Blue
dot
7
6
Fasteners used in this step
6 Barrel Nuts
Package J
ITEM #2607
Full Size
6 Hex Screws
Package A
Assembled View
DELUXE KITCHEN
STEP 3
Check when Done
Assemble two fridge shelves,
part #8 using 4 hex screws(A)
and 4 barrel nuts(J) for each
shelf. Also assemble oven
shelf part # 9 with 4 hex
screws(A) and 4 barrel nuts(J).
8
Red
dot
9
8
Use the colored dots to align
the panels.
Typical Screw & Nut Assembly
Red
dot
Colored Dot
Hex Screw
Barrel Nut
Yellow
dot
Fasteners used in this step
12 Barrel Nuts
Package J
ITEM #2607
Full Size
12 Hex Screws
Package A
Assembled View
DELUXE KITCHEN
Check when Done
STEP 4
10
11
Slide panel #10 between the
grooves as shown and do the
same with panel #11.
Make sure that the panels slide
all the way and fit in the grooves
at the bottom.
Close-up view
Assembled View
ITEM #2607
DELUXE KITCHEN
STEP 5
14
13
13
Check when Done
Attach 2 sink knobs #13 and one faucet #14
to counter top part #12, using a hex screw(B)
and cap nut(H) for each. Tighten the screw
firmly to the cap nut, making sure that the
parts still turn freely. Use the included Hex
Key for the screw and a phillips screwdriver
for the cap nut.
Hex
Key
12
Graphics
this side
Fasteners used in this step
3 Cap Nuts
Full Size
3 Hex Screws
Phillips
Screwdriver
Package H
ITEM #2607
Package B
Assembled View
DELUXE KITCHEN
STEP 6
12
Check when Done
Assemble part #12 to the kitchen
using 4 hex screws(A) and 4 barrel
nuts(J).
Align the panel by matching the
colored dots on the panel and other
parts.
Blue
dot
Typical Screw & Nut Assembly
Colored Dot
Hex Screw
Barrel Nut
Fasteners used in this step
4 Barrel Nuts
Package J
ITEM #2607
Full Size
4 Hex Screws
Package A
Assembled View
DELUXE KITCHEN
STEP 7
Graphics facing
forward
15
Check when Done
16
Carefully lift the kitchen so that it is
standing upright as shown.
Slide panel #15 into the side grooves in
the kitchen as shown, then slide in
panel #16.
Make sure the panels fit into the
grooves at the bottom too.
ITEM #2607
Assembled View
DELUXE KITCHEN
STEP 8
Check when Done
Using 4 hex screws(A) and 4 barrel
nuts(J), assemble part #17 to the kitchen
as shown. The groove in the back of the
part can rest on the rear panel while
assembling the front screws, then assemble
the rear screws to complete this step.
17
Yellow
dot
Line up the colored dots for proper panel
position.
Typical Screw & Nut Assembly
Colored Dot
Hex Screw
Barrel Nut
Fasteners used in this step
4 Barrel Nuts
Package J
ITEM #2607
Full Size
4 Hex Screws
Package A
Assembled View
DELUXE KITCHEN
STEP 9
18
19
Check when Done
Slide part #18 into the grooves as shown.
Then position the pegs in part #19 with
the holes in the shelf and fasten with 1
hex screw(A) and 1 barrel nut(J).
Use the colored dots to align part #19.
Typical Screw & Nut Assembly
Blue
dot
Colored Dot
Hex Screw
Barrel Nut
Barrel
Nut
Fasteners used in this step
1 Barrel Nut
Package J
ITEM #2607
Full Size
1 Hex Screw
Package A
Blue
Dot
Hex
Screw
Assembled View
DELUXE KITCHEN
STEP 10
Check when Done
20
Assemble part #20 first using 4 hex
screws(A) and 4 barrel nuts(J).
21
Then assemble part #21 also with 4 hex
screws(A) and 4 barrel nuts(J).
Green
dot
Yellow
dot
Remember to use the colored dots for
alignment.
Typical Screw & Nut Assembly
Colored Dot
Hex Screw
Barrel Nut
Fasteners used in this step
8 Barrel Nuts
Package J
ITEM #2607
Full Size
8 Hex Screws
Package A
Assembled View
DELUXE KITCHEN
STEP 11
22
22
22
22
Hex
Key
Check when Done
Assemble 4 knobs #22 to panel
#23 using a hex screw(C) and cap
nut(H) for each knob. Use the
included Hex Key for the screws
while holding the cap nut with a
phillips screwdriver. Tighten but
make sure that the knobs can spin
freely.
Make sure that the screws are
tight against the cap nut.
23
Front side
with graphics
It may be easier to
turn the panel to the
back side and insert
the cap nuts first,
as shown here.
Note:
recess
for cap
nut
Phillips
Screwdriver
Fasteners used in this step
4 Cap Nuts
Package H
ITEM #2607
Full Size
4 Hex Screws
Back side of panel
Package C
Assembled View
DELUXE KITCHEN
STEP 12
Check when Done
Take the assembled panel #23 with
knobs and first fit the 2 wood pegs into
the holes as shown, then fasten in place
with a hex screw(A) and barrel nut(J).
Note that the proper assembled position
will be angled slightly back at the top.
See the assembled view below.
Typical Screw & Nut Assembly
Colored Dot
Hex Screw
Barrel Nut
23
Note: This part is supposed
to be slightly angled.
Fasteners used in this step
1 Barrel Nut
Package J
ITEM #2607
Full Size
1 Hex Screw
Package A
Wood
Pegs
Assembled View
DELUXE KITCHEN
STEP 13
Check when Done
Assemble part #24 by inserting the 2
wood pegs into the holes as shown, and
then fastening with a hex screw(A) and
barrel nut(J).
Typical Screw & Nut Assembly
Colored Dot
Hex Screw
Barrel Nut
24
Fasteners used in this step
1 Barrel Nut
Full Size
1 Hex Screw
Wood
Pegs
Package J
ITEM #2607
Package A
Assembled View
DELUXE KITCHEN
STEP 14
Check when Done
25
Assemble part #25 using 1 small hex
screw(D) and 1 cap nut(H) as shown.
Remember to use the included Hex Key for
the screw and a phillips screwdriver for the
Cap Nut.
Hex
Screw
Note: Recess faces
up on black painted
side.
Fasteners used in this step
1 Cap Nut
Package H
ITEM #2607
Full Size
1 Hex Screw
Package D
Cap
Nut
Assembled View
DELUXE KITCHEN
Check when Done
STEP 15
26
Assemble the latch plate #26 using 2
wood screws(G) as shown.
Repeat for 4 more locations for all 5
doors.
Close-up View
Fasteners used in this step
Full Size
10 Wood Screws
Package G
ITEM #2607
Assembled View
DELUXE KITCHEN
STEP 16
28
29
Check when Done
30
31
Assemble a door latch #27 to
the back of each of 5 doors
with 2 wood screws(G) each.
Make sure that the curved
part of the latch is closest
to the bottom of each door
as shown. Do not over-tighten
the screws.
32
Fasteners used in this step
Full Size
10 Wood Screws
27
Package G
ITEM #2607
STEP 17
DELUXE KITCHEN
Check when Done
Assemble two hinges as
shown with screws (F)
to the following doors:
#
#
#
#
Fasteners used in this step
28
29
30
31
Assemble two hinges
as shown only to door
# 32 with screws(F).
This is the only door
where the hinges are
assembled with the
bend to the door.
Full Size
20 Machine Screws
Package F
ITEM #2607
Hinge Bend
DELUXE KITCHEN
Check when Done
STEP 18
Assemble door handle, part #33 as
shown to the front of each door
using 2 machine screws(E) per
handle.
There are 5 doors that you should
attach handles to as shown below.
5 Doors that need handles
33
32
28
30
29
31
Fasteners used in this step
Full Size
10 Machine Screws
Package E
ITEM #2607
Close-up View
DELUXE KITCHEN
STEP 19
28
32
Check when Done
The 3 doors shown here are
attached using 2 machine screws(F)
per hinge, and 2 hinges per door.
Follow this drawing to position the
door in its location.
Close-up View
29
Fasteners used in this step
Full Size
12 Machine Screws
Assembled View
Package F
ITEM #2607
24
DELUXE KITCHEN
STEP 20
Check when Done
Assemble parts #30 and #31
using 2 machine screws(F) per
hinge as shown.
30
Close-up View
31
Fasteners used in this step
Full Size
8 Machine Screws
Package F
ITEM #2607
Assembled View
DELUXE KITCHEN
STEP 21
34
Check when Done
Drop the sink #34 into position as shown.
Close-up View
ITEM #2607
Assembled View