The peelable coating for temporary surface protection

NEW!
Prevent glass damages
during construction
The peelable coating
for temporary
surface protection
Peel-off coating for temporary
glass protection
The super easy way to prevent damage during
construction. Simply roll or spray LiquiFoil on to
windows or other smooth finished surfaces, like
powder-coated aluminium, stainless steel,
cladding, etc.
LiquiFoil protects these surfaces from dirt, paint,
scratches, welding
flecks, cement and
other damage. When
you’re done, just
peel or jet spray it
off. It leaves a clean
and shining surface
that makes a good
impression on your
customers and
saves you a lot in
repair costs.
Delivered in buckets of 20 liter.
Average usage: 5-7 m2.
Key advantages:
• Drastically reduces damage
costs during construction
• Reduces labor costs
• Shields buildings from prying
eyes
• Tough coating repels water
when dry, washable when wet
• Produces much less waste than
standard protective films
• Water-based, non-toxic and
non-flammable
The peelable coating
for temporary
surface protection
Safe, easy and durable
Renovio’s peel-off coating is a water-based
product which is non-toxic and non-flammable. It
can be easily applied with a roller, paintbrush or
spray gun. Once applied, it stays firmly in place
for the length of the project. Since you “paint”
it on, there is no cutting waste compared to
conventional plastic sheets. It peels off cleanly,
leaving no remnants that have to be removed.
Note: When applying to new surfaces, it is helpful
to apply a small test area first. This will help you
decide how much coating needs to be applied and
how long it takes to dry.
As easy as 1,2,3…
1. Roll/spray on
LiquiFoil is a peel-off coating that can be used on
glass and other surfaces to provide temporary
protection during construction or remodeling.
Apply LiquiFoil using a
paint roller, brush or
spray gun. Make sure the
roller or brush is completely covered with the
LiquiFoil. Apply a thick
coat of the product. Allow
4 to 6 hours for the product to dry. The drying
time may be accelerated by applying heat lamps
or blowers to the surface. The coating is semitransparent so that daylight can come in, but
people can not see through it.
2. Protect
Once applied, LiquiFoil protects glass and other
smooth surfaces against the normal wear and
tear incurred during construction or remodeling
projects. It protects against dirt, paint, scratches,
welding flecks, cement, silicon paste and other
damage. LiquiFoil can also be applied to floors
and other high use areas to protect them against
scuffs and spatters.
3. Peel off
Spraying?
We recommend to use the Wagner SF23
After the project has been
completed, simply peeloff LiquiFoil and reveal the
clean and shining surface.
No further cleaning is
required.
More information? Please contact Renovio:
P.O. Box 7034 • 5980 AA Panningen • The Netherlands
t: +31 77 - 465 10 95 • f: +31 77 - 465 10 96
e: [email protected] • w: www.renovio.com - www.liquifoil.com
Renovio HQ, Bosstraat 63a, 5553 CK Valkenswaard, The Netherlands, T: +31 40 2041115, F: +31 40 2048758, E: [email protected], W: www.renovio.com
ING-BANK 667934480 / Giro of the bank 1095361 / IBAN: NL74INGB0667934480 / BIC: INGBNL2A. Renovio is registered at the Chamber of Commerce Eindhoven,
Netherlands with number NL17094605 by its statutary name The Teak Company B.V. / V.A.T. NL808924278B01