Premier Shingle Conveyor Brochure

Premier
Reaching new heights in safe shingle delivery equipment
Introducing the all new “Premier” by Richmond Conveyor.
With operator safety in mind, this shingle conveyor is a
non-conductive design and the first to offer remote control
operations. The unit is available in lengths of 32 to 42 feet
NON-CONDUCTING
Frame Structure
Fiberglass Rails —Engineered to specifications designed for use in shingle conveyors
—Non-conductive
Belting
Cross Supports
Head Section —All aluminum belt pulley construction with
1/4” belt lagging
—Four bolt pillow block style bearing holders
and bearings
—PVC non-conductive belting designed for shingle —Stainless
steel support plates and hinged
conveyor usage
cover with removable sprockets for service
—Paddles are stainless steel with rubber facings for —Emergency stop components are internal to
better grip and less slippage
conveyor frame —All stainless steel construction
Tail Section —All stainless steel guard including hardware
—Return idler wheels are rubber coated with bearings
—Four bolt pillow block style bearing holders
and bearings
—Hydraulic hose routing through the frame structure are captive in a holder
—Utilizes a steel V-guided belt pulley
—All hardware (nuts, bolts, and washers) are stainless steel
Non-Conducting Belt & Stainless Steel Paddles
Tail Section
Valve Controls —Controls all operations of the
conveyor including: conveyor lift, rotation, post height, belt for
shingle delivery, and stabilizers
Head Section and Roof Stand
Bulkhead Support —Supports the conveyor during transportation
Conveyor Cradle
—Powder coated steel with one piece heavy gauge
construction
rotational components (motor, sprockets, Post —All
and chain) are above the truck bed and under a stainless steel cover
—The remote controlled unit utilizes a valve bank with electronic solenoids for the remote
operation of the conveyor and stabilizers
—Rotation is 360° but not continuous
—Telescoping post will raise post an additional 18”
lift to reduce the chance of
Stabilizers —Vertical
asphalt or cement driveway surface
Remote Controlled Hydraulics
—Utilizes a hand held remote control that will operate the conveyor and stabilizers up to 300 feet away from the truck
—Remote operations include: stabilizers,
conveyor lift, rotation, and post height
adjustment
—For safety purposes the remote control will not operate the belt
damage
—Bolt on and removable. Can be transfered
to another truck
—Vertical stabilizer has a swivel foot pad
that will adjust to the surface of the job site
—Can also be operated by remote control
“Manufacturing shingle conveyors since 2000”
Richmond Brothers Fabrication:
In 1992 Mike and Ken Richmond opened Richmond Steel in Pigeon, Michigan as a
general fabrication shop specializing in agricultural equipment. Then in 1995, the Richmond Brothers purchased Alton Company combining operations, manufacturing crew
cab pickups, mid and heavy duty trucks (mainly for railroad and emergency response)
and stretch SUV limousines. In 2000, after selling Richmond Steel and Alton Company, the Richmond’s opened Richmond Brothers Fabrication, Richmond Conveyor, and
Richmond Farms
See Richmond Conveyor’s full line of shingle conveyors including The Ultimate,
Deluxe and Shingle-Vator at www.shingleconveyors.com
P.O. Box 312
Linden, Michigan 48451
Tel: (810) 735-6957
Toll Free: (888) 525-6550
“Quality representation since 1952”
Contact: Mike Murray
[email protected]
www.shingleconveyors.com