Driveline - Custom Bikes by Mike

Transcription

Driveline
12
12
For the Dealer Nearest You, Call: 800-729-3332
12.01
Driveline
Complete RevTech® Drive Train Kits
12
RevTech® Complete Drive Train Kits for Softail® Models
Custom Chrome® has taken the guess work out of the parts needed for a complete drive train for Softail® models. The kits include everything from the
engine to transmission and all hardware needed in-between. Only the finest parts have been selected for maximum reliability and performance, making
it an easy proposition for replacing an existing drive train or for custom applications. Each kit includes: a RevTech® chain drive primary kit with Kevlar®
clutch, polished or black powder coated high-torque starter, jackshaft, heavy duty alternator rotor, stator, all mounting hardware, seals, bushings and
gaskets. Does not include the rectifier/regulator.
Kits for Softail® Models with 1994-1999 Primaries
Natural/Chrome
Feature natural finish engines with machined fins, chrome covers, polished
transmissions, chrome inner and outer primary covers and polished starter
motors.
658750 100" 4x4 motor with 5-speed close-ratio transmission . . . . .$8,559.00
658751 100" 4x4 motor with 6-speed transmission . . . . . . . . . . . . . . . .$8,749.00
658770 110" motor with 5-speed close-ratio transmission . . . . . . . . .$9,029.00
658771 110" motor with 6-speed transmission . . . . . . . . . . . . . . . . . . . .$9,219.00
Natural/Chrome
Feature natural finish engines with machined fins, chrome covers, polished
transmissions, chrome inner and outer primary covers and polished starter
motors.
Polished/Chrome
Feature polished engines with chrome covers, polished transmissions,
chrome inner and outer primary covers and polished starter motors.
658772 110" motor with 5-speed close-ratio transmission . . . . . . . .$10,169.00
658773 110" motor with 6-speed transmission . . . . . . . . . . . . . . . . . . .$10,359.00
Polished/Chrome
658778 110" motor with 5-speed close-ratio transmission . . . . . . . .$10,199.00
658779 110" motor with 6-speed transmission . . . . . . . . . . . . . . . . . . .$10,379.00
Black/Chrome
Feature black powder-coated engines with machined fins and chrome
covers, black powder-coated transmissions and inner primary covers,
chrome outer primary covers and black starter motors.
Black/Chrome
12.02
Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Complete RevTech® Drive Train Kits
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Exhaust
Intake
Engine
Gaskets
RevTech Complete Drive Train Kits for Softail Models with TÜV
®
®
Custom Chrome® has taken the guess work out of the parts needed for a complete drive train for Softail® models. The kits include everything from the
engine to transmission and all hardware needed in-between. Only the finest parts have been selected for maximum reliability and performance, making it
Tranny
an easy proposition for replacing an existing drive train or for custom applications. Each kit includes: a RevTech® chain drive primary kit with Kevlar® clutch,
& Clutch
polished or black powder coated high-torque starter, jackshaft, heavy duty alternator rotor, stator, all mounting hardware, seals, bushings and gaskets. Does
not include the rectifier/regulator.
Natural/Chrome
Feature natural finish engines with chrome covers, polished transmissions,
58664 88" motor with 5-speed close-ratio transmission . . . . . . . . . . . . .$7,799.00
58665 88" motor with 6-speed transmission . . . . . . . . . . . . . . . . . . . . . . . .$7,989.00
Driveline
Natural/Chrome
Feature natural finish engines with chrome covers, polished transmissions,
58660 88" motor with 5-speed close-ratio transmission . . . . . . . . . . . . .$7,819.00 Wheels,
58661 88" motor with 6-speed transmission . . . . . . . . . . . . . . . . . . . . . . . .$7,999.00 Tires
Polished/Chrome
& Brakes
Polished/Chrome
58610 88" motor with 5-speed close-ratio transmission . . . . . . . . . . . . .$8,769.00 Frames
Black/Chrome
Black/Chrome
Forks
& Shocks
Sheetmetal
General
12.03
Cross
Reference
BDL Top Fuel Belt Drives
Driveline
BDL ‘Top Fuel Street Drive’ Primary Drive Kits
12
• Utilize a 14mm x 33/8"-wide belt which is the same as the top
fuel racers use on the 600-plus horsepower machines
• Kevlar® clutch consists of nine 63/8"-diameter friction plates and
eleven steel drive plates
• Special pressure plate uses up to nine springs for varying spring
pressure to accommodate any size motor on the market
• Hub is made from 7075 aluminum and then hard anodized
for superior strength
• TF-1000 includes oil filter mount and side guard
• TF-2000 includes everything in the TF-1000, plus a reversible
outboard bearing support
• Fit all Softail® models from 1991 to present
42905 TF-2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,769.00
42908 TF-1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,254.00
42905
Replacement Belt for BDL TF-1000 and TF-2000
42906 Replacement 14mm x 33/8"-wide drive belt . . . . . . . . . .$215.99
Replacement Clutch Plates for BDL TF-1000 and TF-2000
612260 Kevlar® clutch plates (set of 9) . . . . . . . . . . . . . . . . . . . . . . .$137.25
612261 Steel clutch plates (set of 11) . . . . . . . . . . . . . . . . . . . . . . . . .$41.63
Offset Pulley Inserts with Nuts*
For wide rear tire applications choose appropriate offset insert.
42866 Pulley ONLY for Softail® models . . . . . . . . . . . . . . . . . . . . .$116.99
42868 .25" offset insert
(*not applicable for TF-1000/2000) . . . . . . . . . . . . . . . . . . .$81.99
42869 .50" offset insert
42870 .75" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
42871 1.00" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
42872 1.25" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
612225 1.50" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
612226 1.75" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
612227 2.00" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
42908
Primary Spacers*
For wide rear tire applications choose appropriate primary spacer.
612230 .25" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
612231 .50" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
612232 .75" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
612233 1.00" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
612234 1.25" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
612235 1.50" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
612236 1.75" primary spacer
612237 2.00" primary spacer
*Note: BDL Top Fuel Belt Drives use a .50" pulley offset insert as delivered. For wide tire
applications, use a pulley offset insert that is .50" wider than the primary spacer. For
example, to space primary 1.50", use a 2.00" offset insert and a 1.50" primary spacer.
12.04
BDL 3" Open Belt Drives
Apparel
BDL 3" Open Belt Drives with Outboard Support
This new version adds an outboard support to their already popular 3"
open belt drive. The outboard support adds increased rigidity that keeps
the engine and transmission shaft from flexing under high loads. An
excellent choice for wide-tire high horsepower applications.
Bike Kits
& Trailers
For Softail® Models from 1990 to Present
612250 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,418.75 Seats
& Bags
612251 With oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,643.75
For Dyna Glide Models from 1991 thru 1999
612252 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,418.75
Foot
For Dyna Glide Models from 2000 to Present
Controls
BDL EVO-3000 Retrofit Kit
Billet outboard support plate for BDL 3" open belt drives that did not come
equipped with one. Includes polished support, polished pulley covers, new Hand
Controls
pressure plate and hardware.
Note: Modifications must be made for fitment.
612245 Retrofit billet outboard support plate . . . . . . . . . . . . . . . . . . . . . . .$675.00
Lighting
BDL 3" Belt Drive Kits with Billet Motor Plates
Beefy, one-piece 6061-T6 polished billet motor plate locks the tranny and
engine together. Kits are available with an optional oil filter mount centered in the motor plate. The fanning condition set up by the spinning pulElectrical
leys and belt creates extra cooling for the filter, and the kit allows the oil
lines to be hidden out of the way. All of these kits include a 3"-wide belt
drive unit with polished pressure plate, double-row sealed mainshaft bearing, polished aluminum side plate and pulley covers, and a complete
‘Competitor Clutch’ with Kevlar® plates. For installation in wide frame/tire
applications, choose the appropriate insert to space the front pulley out for Exhaust
your particular frame and driveline combination.
For Softail® Models from 1990 to Present
42644 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,436.00 Intake
For 5-Speed Softail® Models from 1986 thru 1989
For Dyna Glide Models from 1991 thru 1999
For Dyna Glide Models from 2000 to Present
Engine
Gaskets
For FXR Models from 1990 thru 1994
May also be used in custom late-model rubber-mount frames
using FXR transmissions.
42647 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,729.99 Tranny
For Shovelhead Models with 4-Speed Ratchet Top Transmissions & Clutch
from 1970–early 1979 without Starter Motor
Offset Pulley Inserts with Nuts
For wide tire applications choose appropriate offset insert.
42866 Pulley ONLY for Softail® models . . . . . . .$116.99
42868 .25" offset insert . . . . . . . . . . . . . . . . . . . . . .$81.99
42869 .50" offset insert . . . . . . . . . . . . . . . . . . . . . .$81.99
42870 .75" offset insert . . . . . . . . . . . . . . . . . . . . . .$81.99
42871 1.00" offset insert . . . . . . . . . . . . . . . . . . . . .$81.99
42872 1.25" offset insert . . . . . . . . . . . . . . . . . . . . .$81.99
612225 1.50" offset insert . . . . . . . . . . . . . . . . . . . . .$81.99
612226 1.75" offset insert . . . . . . . . . . . . . . . . . . . . .$81.99
612227 2.00" offset insert . . . . . . . . . . . . . . . . . . . . .$81.99
Primary Spacers
For wide tire applications choose appropriate primary spacer.
612230 .25" primary spacer . . . . . . . . . . . . . . . . . . . .$81.99
612231 .50" primary spacer . . . . . . . . . . . . . . . . . . . .$81.99
612232 .75" primary spacer . . . . . . . . . . . . . . . . . . . .$81.99
612233 1.00" primary spacer . . . . . . . . . . . . . . . . . .$81.99
612234 1.25" primary spacer . . . . . . . . . . . . . . . . . .$81.99
612235 1.50" primary spacer . . . . . . . . . . . . . . . . . .$81.99
612236 1.75" primary spacer . . . . . . . . . . . . . . . . . .$81.99
612237 2.00" primary spacer . . . . . . . . . . . . . . . . . .$81.99
For Shovelhead Models with 4-Speed Ratchet Top Transmissions
Driveline
from 1970–early 1979 with Starter Motor
Note 1: Installation requires use of a 1991 or later starter motor, and the use of a late 1979 or
later clutch arm (CC #18430) which must be modified to provide adequate clearance.
Note 2: FX models require removal of the OEM oil tank bracket to allow proper starter fitment.
Note 3: No provision is made for footpegs or floorboards with these kits.
Wheels,
Tires
& Brakes
Replacement Belts
42515 Fits CC #612250, 612251, 612252, 612253, 42845,
42644, 42844, 42645, 42646 and 612240 . . . . . . . . . . . . . . . . . . . .$1,729.99
42516 Fits CC #42647 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,729.99 Frames
43036 Fits CC #42508, 42579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,729.99
Replacement Clutch Plates for 3" BDL Open Belt Drives
612265 Kevlar® clutch plates (set of 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.75
Forks
612266 Steel clutch plates (set of 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.13
& Shocks
42637 Steel backing plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
Sheetmetal
General
12.05
Cross
Reference
BDL Belt Drives
BDL 8mm Primary Belt Drive Kits
for 4-Speed Models
Driveline
The 8mm belt pitch has been used for years on
primary drives and the 11/2"-wide kit is considered by many to provide the best all-around
combination for dependable operation. Kits
include front pulley, rear clutch hub/pulley and
an extra replacement belt. Designed for use
with existing clutch hub and clutch.
42524 40/60-tooth pulleys for electric start
models from 1965 thru 1978 . . . . .$349.99
42525 41/61-tooth pulleys for electric start
models from 1980-early 1984 . . . .$349.99
42526 Same as CC #42525 but specifically
for models with factory rear belt drive
and belt drive inner primary . . . . .$349.99
42527 39/62-tooth pulleys for kick start
models with tapered engine shaft
from 1936 thru 1954 . . . . . . . . . . . . .$271.99
models with splined engine shaft
from 1955 thru 1964 . . . . . . . . . . . . .$271.99
from 1965 thru 1978 . . . . . . . . . . . . .$271.99
from 1979 thru 1984 . . . . . . . . . . . . .$271.99
BDL 8mm ’Bolt-In’ Belt Drive Kits
Engineered to handle the most brutal torque
and horsepower demands. Requires no primary
case modifications to install. Features a cylindrical-shaped, replaceable clutch dog capable of
withstanding 1200 foot pounds of torque. BDL’s
steel hub design moves the clutch basket
inward, eliminating unnecessary weight hanging from the mainshaft. Barnett Kevlar® clutch
provides 70% greater surface area than stock
for maximum hook-up. Complete kit includes
front and rear pulleys, clutch, and a sealed
primary bearing. . . . . . . . . . . . . . . . . . . . . . . . . .$599.94
42520 Fits Softail® and Dyna Glide models
from 1994 to present
42519 Fits Softail® and Dyna Glide models
from 1990 thru 1993
42518 Fits Softail® models from 1986 thru 1989
42670 Fits rubber-mount Big Twin models
(except Dyna Glide models) from
1994 to present
(except Dyna Glide models) from
1990 thru 1993
from 1986 thru 1989
42673 Fits 5-speed Shovelhead models with
chain rear drive from 1980 thru 1983
chain rear drive from 1965-early 1984
belt rear drive from 1980-early 1984
BDL 3"-Wide Primary Drive Kits
for Kick Start Applications
Eliminate gyroscopic imbalance and belt whipping found in many 3" drives with a BDL drive
kit that puts the inner hub a full inch further
inboard than most other belt drives. With the
rear pulley further over the main shaft virtually
all instability in the primary drive is eliminated.
The 8mm pulleys are hard anodized and use a
special belt that traps less air than HTD belts.
The rear pulley has a double row bearing that
supports a ‘Stressproof’ steel clutch hub. Also
included are a clutch and polished aluminum
pressure plate. Safety guards are always recommended with 3" drive systems. . . . . . . . . . . .$785.99
42537 Kit with 47/72-tooth pulleys for Softail®
models with splined shaft from 1990
to present
42536 Kit with 47/72-tooth pulleys for Softail®
models with tapered shaft from late
1986 thru 1989
42541 Kit with 47/76-tooth pulleys for Panhead
and Shovelhead models with splined
shaft from 1955-early 1984
42542 Kit with 47/72-tooth pulleys (for less
engine speed) for Shovelhead models
with splined shaft from 1965-early 1984
42540 Kit with 47/76-tooth pulleys for Panhead
and Knucklehead models with tapered
shaft from 1936 thru 1954
12
BDL Wide-Belt Primary Drives
for Kick Start Big Twins
BDL 11mm Primary Belt
Drive Kits
11/2"-wide, 11mm belt kits include an extra belt
with every kit. For precision belt adjustment, kits
for aluminum-primary Big Twins include a BDL
idler that makes sure belt tension is correct (tin
primary models use tranny adjustment for correct belt tension). All kits use 31-tooth engine
pulleys and 47-tooth clutch pulleys.
42589 Fits 5-speed models with electric
start from 1980-early 1984 . . . . . . .$378.99
42588 Fits 4-speed models with electric
start from 1965-early 1984 . . . . . . .$378.99
42890 Same as CC #42588 but specifically
for models with factory rear belt drive
and belt drive inner primary . . . . .$378.99
42587 Fits splined shaft 4-speed kick start
models from 1965-early 1984 . . . .$342.99
42586 Fits splined shaft 4-speed kick start
models from 1955 thru 1964 . . . . .$295.99
42585 Fits tapered shaft 4-speed kick start
models from 1936 thru 1954 . . . .$295.99
12.06
BDL Retro-Fit Clutch for
3" Primary Belt Drives
This complete clutch package features BDL’s
advanced design that moves weight in-board
of the bearing to eliminate gyroscopic-induced
vibration in the primary drive. Complete with
Kevlar clutch, polished aluminum pressure plate
with springs, shoulder bolts, clutch basket, steel
clutch hub, double sealed bearing and all hardware. It is designed to be used with existing 3"
front pulley and 8mm-pitch belts on 1936-early
1984 kick start models. . . . . . . . . . . . . . . . . . .$542.99
42543 Complete kit
The 2" and 3"-wide pulleys and clutch hubs are
cast from 356-T6 aluminum and machined in
BDL’s own foundry and machining operation.
These kits use the stock clutch hub and clutch,
and include 76-tooth clutch basket and 47-tooth
engine pulleys, 8mm-pitch belt, and ‘Big Fix’
clutch hub roller bearings.
42534 3"-wide kit for Big Twins with splined
shaft from 1955-early 1984 . . . . . .$428.99
42533 3"-wide kit for Big Twins with tapered
shaft from 1936 thru 1954 . . . . . . .$428.99
42532 2"-wide kit for Big Twins with splined
shaft from 1955-early 1984 . . . . . .$369.99
42531 2"-wide kit for Big Twins with tapered
shaft from 1936 thru 1954 . . . . . . .$369.99
BDL Belt Drive Accessories
Apparel
BDL Covers for 3" Belt Drives
44714
These covers look great while they protect the belt from road
debris and your legs and boots from the belt. They’re made from
billet aluminum and attach securely in minutes with four sturdy
mounts to ensure stability. Available in three streamlined versions
with chrome or polished finishes, these covers are the safest way
to add style to your primary belt drive. Fit Softail® and Dyna Glide
models from 1984 to present.
44714 Polished “open clutch” . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99
44715 Chrome “open clutch” . . . . . . . . . . . . . . . . . . . . . . . . . . . .$428.99
44716 Polished “two hole” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99
44717 Chrome “two hole” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$428.99
44718 Polished “no hole” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99
44719 Chrome “no hole” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$428.99
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
44716
Lighting
Electrical
Exhaust
Intake
44718
Engine
Gaskets
Tranny
& Clutch
250310
Driveline
Wheels,
Tires
& Brakes
BDL Polished Aluminum
Alternator Cover
for 3" Open Belt Drives
Three Piece Belt Drive Covers
No doubt about it, Primo and BDL 3" open primary belt drives are about the coolest thing you can bolt
onto a Harley. With this three-piece cover set, you can take it a step further and put your belt drive into
overdrive. Machined from heavy billet aluminum, then show chromed, this kit will completely transform
the appearance of your belt drive. Now you can replaces the industrial appearance present in belt
drives with brilliant smooth flowing lines. These parts have a depth of finish that stamped aluminum
or steel covers just can't touch. For BDL or Primo 3" open belt drives (must be version with motor plate
to use center section). Sold complete with all mounting hardware. Made in USA.
250300 Fits all BDL 3" open belt drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.99
250310 Fits all Primo 3" open belt drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$319.99
Frames
Add some sparkle to that often overlooked spot
on 3" open belt drives. This heavy gauge polished aluminum cover has a mirror finish that
will bring out the best in your belt drive. Cover
installs on alternator shaft between the alternator rotor and belt drive pulley. No extra mounting hardware required.
071084 Fits all 3" open belt drives . . . . . . . .$19.99
Forks
& Shocks
Sheetmetal
General
12.07
Cross
Reference
BDL Belt Drive Parts & Accessories
BDL Parts and Accessories
This page has a variety of accessories and replacement parts for the BDL primary belt and chain drive kits sold by Custom Chrome.
Replacement Parts for ‘Bolt In’
8mm Primary Belt Drive Kits
Replacement Parts for 3" Belt
Drive Kits with Billet Motor Plates
Replacement Parts for BDL
Chain Primary Kits
Offset Front Pulley
42893 Fits CC #’s 42518, 42519, 42520 . . .$116.99
Polished Aluminum Motor Plates ONLY
42850 Fits Softail® models (includes
bearing) . . . . . . . . . . . . . . . . . . . . . . . .$849.99
42851 Fits 1970 thru 1978 Shovelheads
(includes bearing) . . . . . . . . . . . . . . .$849.99
42852 Fits 1990 thru 1994 FXR models
(includes bearing) . . . . . . . . . . . . . . .$849.99
42853 Fits Dyna Glide models from 1991
thru 1999 (includes bearing) . . . . .$849.99
Clutch
42837
42838
42839
Pack Kits
Kevlar® clutch plates (set of 7) . . . . .$99.99
Steel drive plates (set of 8) . . . . . . . .$59.99
Clutch pressure plate . . . . . . . . . . . . .$81.99
Clutch
42830
42831
42832
42843
Hubs and Nuts
Fits 1936 thru 1984 taper shaft . . .$116.99
Fits 1986 thru 1989 taper shaft . . .$116.99
Fits 1990-up splined shaft . . . . . . . .$116.99
Clutch hub nut . . . . . . . . . . . . . . . . . . . .$9.49
Front Belt Drive Pulleys and Guides
42881 45 tooth for Softail® and 4-speed
Shovelhead models . . . . . . . . . . . . . .$109.99
42882 48 tooth for 5-speed Shovelhead
and FXR models . . . . . . . . . . . . . . . . .$109.99
42883 Inner belt guide for CC #42881 . . . . .$6.49
42884 Outer belt guide for CC #42881 . . . .$6.49
Clutch Baskets
Include basket with clutch dogs, bearing and
starter ring gear.
44624 Fits Shovelhead models from 1970-early
1984 (CC #’s 42521, 42673) . . . . . . .$237.99
42885 Fits Softail®, Dyna Glide and FXR models
with 68-tooth ring gears from 1986 to
present (CC #’s 42518, 42519, 42520,
42670, 42671, 42672, 42674) . . . . .$230.99
Clutch Hubs
42604 Clutch hub for splined mainshafts
from 1990 to present . . . . . . . . . . . .$118.99
42605 Clutch hub for tapered mainshafts
from 1986 thru 1989 . . . . . . . . . . . . .$116.99
42607 Clutch hub for Shovelheads
from 1965 thru 1984 . . . . . . . . . . . . .$116.99
Driveline
Round Clutch Dog Sets
Sold in packs of 12.
42886 Fits Softail®, FXR and 5-speed
Shovelhead models . . . . . . . . . . . . . . .$47.99
42887 Fits 4-speed Shovelhead models . . .$47.99
12
Mainshaft Clutch Hub Nut
42888 Fits Big Twins from 1990 to present
(includes seal) . . . . . . . . . . . . . . . . . . . . .$6.74
Pressure Plate Components
42598 Pressure plate for Big Twins
from 1984 to present . . . . . . . . . . . . .$50.99
42599 Shoulder bolts for CC #42598 . . . . .$16.99
42606 Clutch springs for Big Twins
from 1984 to present (set of 6) . . . .$16.99
42842 Clutch adjusting rod for
1990 to present . . . . . . . . . . . . . . . . . . . .$6.89
Miscellaneous Parts
42632 C-clip for backside of clutch hub . . .$1.99
42633 2.44" C-clip for hub bearing . . . . . . .$2.49
42634 Kevlar® clutch plate, 1-sided . . . . . .$16.49
42635 Kevlar® clutch plate, 2-sided . . . . . .$16.49
42636 Notched steel drive plate . . . . . . . . .$10.99
42637 Splined steel drive plate . . . . . . . . . .$10.99
42643 ‘Round dog’ steel drive plate . . . . . .$10.99
42638 40mm double row basket
hub bearing . . . . . . . . . . . . . . . . . . . . . .$50.99
42639 Sealed inner primary bearing for
Big Twins from 1985 to present . . .$16.49
42600 Primary seal for Big Twins
from 1986 to present . . . . . . . . . . . . . .$7.99
42640 Seal kit for Evolution® models
with adjustable clutch rods . . . . . . .$10.99
42641 Steel step washer for Evolution®
Big Twin models . . . . . . . . . . . . . . . . . . .$3.29
42593 Washer for splined engine shaft . . . .$1.99
42597 Flat hex splined shaft engine nut . . .$4.19
12.08
Polished Billet Starter Housings
42854 Fits BDL Evolution® style motor
plates . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.99
42855 Fits BDL Shovelhead motor
plates . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.99
Polished Aluminum Side Plates
42856 Fits Softail® and Dyna Glide
models . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.99
42857 Fits Shovelhead models . . . . . . . . . . .$84.99
42858 Fits FXR models . . . . . . . . . . . . . . . . . . .$84.99
Motor
42862
42863
42864
Plate Mainshaft Bearing and Clip
Fits Evolution® models . . . . . . . . . . . .$59.99
Fits Shovelhead models . . . . . . . . . . .$29.49
C-Clip bearing retainer . . . . . . . . . . . . .$6.49
Starter Pinion Gears
42623 Fits 5-speed Softail®, Dyna Glide
and FXR models . . . . . . . . . . . . . . . . . .$74.99
Hardware Mounting Kits
For mounting 3" open belt drive kits. Includes
stand offs, engine and transmission mounting
hardware.
42859 Fits Softail® and FXR models . . . . . .$59.99
42861 Fits Dyna Glide models . . . . . . . . . . . .$59.99
Clutch Baskets with Competitor Clutches
44629 Fits kick start models ONLY
from 1955 thru 1983 . . . . . . . . . . . . .$714.99
Step Washer
42833 Fits splined shaft clutch hubs . . . . . . .$6.49
Shoulder Bolts
42840 Fits CC #42839 (set of 9) . . . . . . . . . . . .$9.94
Clutch Springs
42841 Fits CC #42840 shoulder bolts and
#42839 pressure plate (set of 9) . . .$12.49
Clutch Adjusting Screw and Nut
42842 Fits BDL chain drive primary kits . . . .$6.89
C-Clips
42834 Fits clutch hub . . . . . . . . . . . . . . . . . . . . .$2.59
42835 Fits backside clutch hubs . . . . . . . . . . .$1.89
42836 Fits step washer . . . . . . . . . . . . . . . . . . .$4.99
Miscellaneous Parts
42592 Washer for tapered engine shaft . . .$1.99
42593 Washer for splined engine shaft . . . .$1.99
42596 Flat hex tapered shaft engine nut . .$4.19
42597 Flat hex splined shaft engine nut . . .$4.19
Replacement 3" Baskets
Includes basket, gear, dogs and bearing.
44625 Fits Softail®, FXR, and
Dyna Glide models . . . . . . . . . . . . . .$356.99
44626 Fits Shovelhead models . . . . . . . . . .$356.99
Primary Belt Pulley Spacers
Avoid premature belt failure due to misalignment of the front and rear primary pulleys.
Designed for use behind the motor pulley to
achieve proper front to rear belt alignment.
Sold in ten-packs of various sizes as well as
on a ‘shop supply’ card of 5 kits, each kit
containing one of each size.
42150 ‘Shop supply’ card of 5 kits . . . . . . . .$18.49
42151 .010"-thick (pack of 10) . . . . . . . . . . . .$9.99
42152 .020"-thick (pack of 10) . . . . . . . . . . .$10.74
42153 .040"-thick (pack of 10) . . . . . . . . . . .$11.49
42154 .060"-thick (pack of 10) . . . . . . . . . . .$12.29
BDL Belt Drive Parts & Accessories
Apparel
BDL Primary Pulleys and Accessories
By controlling the entire manufacturing process from design to casting to finish machining, BDL provides consistent high-quality products. Pulleys are cast
from 356T6 aluminum in their own foundry, and finished in their own machining center so that you know that every pulley will be exactly what you need
to transmit all that thundering power to the road.
Pulleys for Pre-Evolution® Big Twins
42548 Front 39-tooth tapered engine shaft,
11/2" 8mm belt . . . . . . . . . . . . . . . . . . .$81.99
42549 Front 39-tooth splined engine shaft,
11/2" 8mm belt . . . . . . . . . . . . . . . . . . .$81.99
11/2" 8mm belt . . . . . . . . . . . . . . . . . . .$81.99
11/2" 8mm belt . . . . . . . . . . . . . . . . . . .$81.99
11/2" 11mm belt . . . . . . . . . . . . . . . . . .$81.99
11/2" 11mm belt . . . . . . . . . . . . . . . . . .$81.99
2" 8mm belt . . . . . . . . . . . . . . . . . . . .$104.00
2" 8mm belt . . . . . . . . . . . . . . . . . . . .$104.00
3" 8mm belt . . . . . . . . . . . . . . . . . . . .$116.99
3" 8mm belt . . . . . . . . . . . . . . . . . . . .$116.99
42563 Rear 61-tooth kick start,
11/2" 8mm belt . . . . . . . . . . . . . . . . . .$230.99
11/2" 8mm belt . . . . . . . . . . . . . . . . . .$230.99
42565 Rear 61-tooth electric start,
11/2" 8mm belt . . . . . . . . . . . . . . . . . .$271.99
11/2" 11mm belt . . . . . . . . . . . . . . . . .$259.99
42567 Rear 47-tooth electric start,
11/2" 11mm belt . . . . . . . . . . . . . . . . .$314.99
42568 Rear 47-tooth electric start 5-speed
tranny, 11/2" 11mm belt . . . . . . . . . .$314.99
2" 8mm belt . . . . . . . . . . . . . . . . . . . .$259.99
3" 8mm belt . . . . . . . . . . . . . . . . . . . .$328.99
Bike Kits
& Trailers
Pulleys for Evolution® Big Twin Models
42559 Rear splined mainshaft 72-tooth with
clutch hub, 13/4" 8mm belt . . . . . . .$386.99
42560 Rear tapered mainshaft 72-tooth with
clutch hub, 3" 8mm belt . . . . . . . . .$428.99
42561 Rear splined mainshaft 72-tooth with
42562 Rear pre-1983 mainshaft 76-tooth with
Accessories
Pulley Offset Inserts with Nuts
For wide tire applications choose appropriate
offset insert.
42866 Pulley ONLY for Softail® models . .$116.99
42868 .25" offset insert . . . . . . . . . . . . . . . . .$81.99
42869 .50" offset insert . . . . . . . . . . . . . . . . .$81.99
42870 .75" offset insert . . . . . . . . . . . . . . . . .$81.99
42871 1.00" offset insert . . . . . . . . . . . . . . . .$81.99
42872 1.25" offset insert . . . . . . . . . . . . . . . .$81.99
612225 1.50" offset insert . . . . . . . . . . . . . . . .$81.99
612226 1.75" offset insert . . . . . . . . . . . . . . . .$81.99
612227 2.00" offset insert . . . . . . . . . . . . . . . .$81.99
Idler Bearing Kit
Hand
42608 Fits 11mm belt drive units . . . . . . . . .$46.99
Primary Spacers
For wide tire applications choose appropriate
primary spacer.
612230 .25" primary spacer . . . . . . . . . . . . . . .$81.99
612231 .50" primary spacer . . . . . . . . . . . . . . .$81.99
612232 .75" primary spacer . . . . . . . . . . . . . . .$81.99
612233 1.00" primary spacer . . . . . . . . . . . . . .$81.99
612234 1.25" primary spacer . . . . . . . . . . . . . .$81.99
612235 1.50" primary spacer . . . . . . . . . . . . . .$81.99
612236 1.75" primary spacer . . . . . . . . . . . . . .$81.99
612237 2.00" primary spacer . . . . . . . . . . . . . .$81.99
Primary Drive Components
42601 Clutch basket and hub Big Twins
1965 thru 1984 . . . . . . . . . . . . . . . . . .$349.99
42602 Clutch basket and hub Big Twins
1986 thru 1989 . . . . . . . . . . . . . . . . . .$349.99
Starter Upgrade Kit for BDL Applications
Includes a 66-tooth starter ring gear and a
9-tooth starter gear. Permits you to upgrade
your 1994-up Big Twin to this heavy-duty
(early-style) setup.
42698 Fits Big Twins 1994 to present . . . . .$84.99
42699 9-tooth starter extension
pinion gear only . . . . . . . . . . . . . . . . . .$74.99
Seats
& Bags
Foot
Controls
Controls
Polished Aluminum Open Belt Drive
Pulley Cover Set
Polished and undrilled. Installation requires
drilling the pulleys and covers, or using an adhe- Lighting
sive to attach the covers.
42648 Fits 72-tooth/47-tooth pulleys . . . . .$59.99
42846 Fits CC #42508 for Shovelheads . . . .$59.99
Belt Guides
Electrical
42609 Front pulley inner belt guide
for 8mm and 11mm drives . . . . . . . . .$5.79
42610 Front pulley outer belt guide
for 8mm and 11mm drives . . . . . . . . .$5.79
Exhaust
Starter Ring Gears for BDL Belt Drives
42582 Fits Big Twins 1965-early 1984
(for CC# 42524, 42525, 42526, 42588,
42589) . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.99
42583 Fits Big Twins 1985 thru 1993 (for all BDL Intake
belt drives, open or closed, with BDL
clutch) . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.99
Billet Aluminum Rear Belt Pulley Spacers
For offset belt and wide rear tire applications.
Engine
42691 .250"-thick . . . . . . . . . . . . . . . . . . . . . . .$29.99
42692 .375"-thick . . . . . . . . . . . . . . . . . . . . . . .$37.99
42693 .500"-thick . . . . . . . . . . . . . . . . . . . . . . .$44.99
42694 .750"-thick . . . . . . . . . . . . . . . . . . . . . . .$59.99 Gaskets
42695 .937"-thick . . . . . . . . . . . . . . . . . . . . . . .$59.99
42696 1.100"-thick . . . . . . . . . . . . . . . . . . . . . .$74.99
42697 1.250"-thick . . . . . . . . . . . . . . . . . . . . . .$74.99
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Mainshaft Bearing Support
42868
Re-establishes mainshaft bearing support when
cast inner primary cover is removed in open belt
drive applications. Cast aluminum construction
with reinforcement ribs. Fits Big Twins (except
models with diaphragm clutch) 1966 thru 1984.
060689 Mainshaft support
with bearings . . . . . . . . . . . . . . . . . . . .$39.99
20014 Support plate
(bearing not included) . . . . . . . . . . . .$30.29
20015 Bearing (repl. OEM 9061)
sold each . . . . . . . . . . . . . . . . . . . . . . . . .$18.99
12.09
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Primo ‘Brute IV’ & ‘Brute V’ Belt Drives
Primo ‘Brute V’ Belt Drive Kit with Motor Plate
Driveline
Primo Belt Drives 14mm, 31/2" wide "SUPER STREET" primary belt drive is designed to handle all
the horses your big stroker can make. It's the first 31/2" wide, 14mm belt drive available. PRIMO
introduced the 14mm belt drive way back in 1973. Now you can get famous PRIMO quality and
performance in a super wide 14mm belt drive for your Big Twin. Kits include polished outer
pulley/belt cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,699.00
• Features polished motor plate and performance clutch
• Has 14mm strength and a 31/2" wide belt
• Easy installation
• Electric start
667510 Fits Twin Cam 88® Softail® models from 2000 to present
667511 Fits Evolution® Softail® models from 1990 thru 1999
12
Primo ‘Brute IV’ 3" Open Belt Drive Kits
for Big Twins
Designed for electric start models with forward controls. Complete kits
include the Primo billet motor plate available in either a polished or natural
aluminum finish, clutch basket with clutch, motor pulley, polished plain belt
shroud, starter shaft extension assembly and hardware. To optimize the
look, a chrome-plated belt shroud and clutch dome are available.
See page 12.13.
Complete Kits with Polished Motor Plate
43115 Fits Twin Cam 88® Softail® models from 2000 to present . . . . .$2,014.00
42653 Fits Evolution® Softail® models from 1990 thru 1999 . . . . . . . . .$2,019.00
42654 Fits Dyna Glide models from 1991 to present . . . . . . . . . . . . . . . .$1,959.00
43114 Fits all rubber-mount Big Twin models from 1990
thru 1999 (except Dyna Glide models) . . . . . . . . . . . . . . . . . . . . . .$1,999.00
071239 Fits Shovelhead models with ratchet top transmissions
from 1970-early 1979 (requires 1990-up starter motor) . . . . . .$2,029.99
Complete Kits with Natural Finish Motor Plate
43112 Fits Dyna Glide models from 1991 to present . . . . . . . . . . . . . . . .$2,119.00
43113 Fits all rubber-mount Big Twin models from 1990
thru 1999 (except Dyna Glide models) . . . . . . . . . . . . . . . . . . . . . .$1,909.99
Complete Kit with 1/2" Offset Polished Motor Plate
Use with a 1/2" offset transmission to clear wide tire applications.
071237 Fits Shovelhead models with ratchet top transmissions
from 1970-early 1979 (requires 1990-up starter motor) . . . . . .$2,429.00
Polished Motor Plate Only
12.10
Replacement Parts
85151 Starter shaft extension assembly, 1990 to present . . . . . . . . . . . . .$199.99
43036 Primary belt, 8 mm x 3", 144-teeth for Softail®
and Dyna Glide applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$156.99
85188 Clutch friction plate pack (set of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.99
85189 Clutch steel plate, .080"-thick (sold each) . . . . . . . . . . . . . . . . . . . . . .$10.99
85190 Clutch steel pate, .047"-thick (sold each) . . . . . . . . . . . . . . . . . . . . . .$10.99
85717 Starter ring gear screw (6 required) sold each . . . . . . . . . . . . . . . . . .$1.29
43102 Starter ring gear, 102-teeth, 1994-1997 Big Twins . . . . . . . . . . . . .$124.99
43107 Heavy duty starter ring gear, 66-teeth, 1990-1993 Big Twins . . . .$82.99
85722 Starter shaft extension pinion gear (sold each) . . . . . . . . . . . . . . . .$87.99
85728 Starter shaft pinion gear for Brute IV belt kits (sold each) . . . . . .$56.99
Primo Belt Drives
Primo ‘Brute III’ Belt Drive Kits
for Twin Cam 88® and
Evolution® Big Twin Models
Apparel
Bike Kits
& Trailers
Brute III Kits are equipped with Primo Belt Drive's "dry-clutch" basket/pulley assembly which retains diaphragm spring function while
increasing clutch area almost 100%. The Brute III is ideal for all perSeats
formance street or competition Big Twin model applications.
Complete Kits
43101 Fits Softail® models from 1986 thru 1989 . . . . . . . . . .$758.99
43104 Fits Softail® and Dyna Glide models from
1990 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$759.99
43106 Fits Evolution® Softail® models from 1994 thru 1999,
and Dyna Glide models from 1994 to present . . . . .$774.99
43131 Fits Twin Cam 88® Softail® models
from 2000 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . .$794.99
from 1986 thru 1989 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$758.99
43103 Fits rubber-mount Big Twin models from 1990 thru 1993
(except Dyna Glide models) . . . . . . . . . . . . . . . . . . . . . .$762.99
43105 Fits rubber-mount Big Twin models from 1994 to present
(except Dyna Glide models) . . . . . . . . . . . . . . . . . . . . . .$772.99
Replacement Parts
42873 Primary belt 8mm x 13/4", 130-teeth for rubber-mount
applications (except Dyna Glide models) . . . . . . . . . . .$99.99
42874 Primary belt 8mm x 13/4", 138-teeth for Softail®
and Dyna Glide applications . . . . . . . . . . . . . . . . . . . . . . .$99.99
85188 Clutch friction plate pack (6 plates) . . . . . . . . . . . . . . . .$74.99
85189 Clutch steel drive plate, .080"-thick (sold each) . . . . .$10.99
85190 Clutch steel drive plate, .047"-thick (sold each) . . . . .$10.99
86121 Starter ring gear, 1986 thru 1993 (sold each) . . . . . . .$58.99
86122 Starter ring gear, 1994-up (sold each) . . . . . . . . . . . . .$145.99
86123 Ring gear screws (set of 6) . . . . . . . . . . . . . . . . . . . . . . . . . .$1.29
Primo Belt Drive Kits
for Panheads and Shovelheads
84612
84615
84613
84616
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Exhaust
Intake
Engine
All Primo belt pulleys are hard anodized for trouble-free operation, and the front pulleys
are drilled and tapped for easy removal. The clutch dogs inside the rear pulleys are hardened and are then secured by two stainless steel rivets into the slotted clutch basket. The
fiberglass-reinforced rubber belt combines superior strength and heat transferring quality
and completes the Primo belt drive kits.
84611 Fits 1965 thru 1978 models with electric start and closed primary
(11/2" x 8 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$394.22
84612 Fits 1979-early 1984 models with electric start, closed primary and chain final drive
(11/2" x 8 mm). Will not fit models with factory rear belt drive . . . . . . . . . . . . . . . .$394.22
84613 Fits 1955 thru 1964 models with kick start and closed primary
(11/2" x 8 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$278.99
071254 Fits 1955 thru 1964 with kick start and closed primary (11/2" x 11 mm) . . . . . . . .$304.99
84614 Fits 1965 thru 1977 models with kick start and closed primary
(11/2" x 8 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$278.99
84615 Fits 1978-early 1984 models with kick start and closed primary
(11/2" x 8 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$294.99
071206 Fits 1978-early 1984 models with electric start and closed primary
(8 mm) for factory rear belt only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$374.99
84616 Fits 1965-early 1984 models with electric start and closed primary
(11/2" x 11 mm with idler) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
071256 Fits 1965-early 1984 models with kick start and closed primary
(11/2" x 11 mm with idler) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$403.99
071200 Fits 1937 thru 1954 models with kick start and closed primary (11/2" x 8 mm) . .$299.99
84617 Fits 1937 thru 1954 models with kick start and open primary (3" x 8 mm) . . . . .$396.99
84618 Fits 1955-early 1984 models with kick start and open primary (3" x 8 mm) . . . .$441.99
071210 Fits 1955-early 1984 models with kick start and open primary (2" x 8 mm) . . . .$356.75
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
84617
General
84618
12.11
Cross
Reference
Primo Belt Drive Accessories
Outboard Bearing Support
for Primo 'Brute IV'
and 'Brute V' Belt Drives
Engineered and designed for extreme high performance applications or just plain good looks.
You get both with Primo Belt Drives all new
"Outboard Bearing support." Not just another
pretty face, Primo's Outboard Bearing Support
provides added rigidity and structural support
for the 'Brute IV' and 'Brute V' open belt
drive systems. . . . . . . . . . . . . . . . . . . . . . . . . . .$1,599.00
667529 Outboard bearing support for ‘Brute V’
667530 Outboard bearing support for ‘Brute V’
3D Flamed Guard for Primo
'Brute IV' and 'Brute V'
Primo's all new 3D Flamed belt guard keeps foreign objects out of the belt drive and away from
the pulleys. The enhanced three dimensional
characteristics of the guard allow you to customize it by applying paint or other effects to
the recessed areas to match your existing custom paint job.
667520 For 'Brute IV' . . . . . . . . . . . . . . . . . . . .$479.99
667521 For 'Brute V' . . . . . . . . . . . . . . . . . . . . .$479.99
Driveline
Primo ‘Equalizer’ Motor Plate Kit
The slotted end permits mounting on adjustable
transmissions. The equalizer provides the needed support between engine and transmission
when you’re eliminating the inner primary for
open belt drive mounting. . . . . . . . . . . . . . . .$115.19
84626 Fits open belt drives on Shovelhead
Big Twins from 1970 thru 1984
84626
12
Primo Offset Front Pulley Inserts
To permit custom motorcycle builders the freedom to offset the transmission by allowing the
use of wider rear wheel/tire assemblies, the
following offset inserts are available for Primo
front pulleys. Special nuts and flanges (outside
guide) are required. The 2.5" inserts fit Brute III
front pulleys, the 3.5" inserts fit Brute IV pulleys.
Primo Mainshaft Support Plate
for Belt Final Drive
For Big Twins utilizing a secondary belt drive in
conjunction with an open primary. This unit
allows for the extra thickness of the rear belt
drive's front pulley and added transmission
mainshaft length. Includes bearing.
42049 Fits 4-speed Big Twins from 1980
thru 1986 . . . . . . . . . . . . . . . . . . . . . . .$104.99
667528 Fits 5 and 6-speed Big Twins with
kick starters . . . . . . . . . . . . . . . . . . . . .$149.99
Offset
Clutch Domes
Highly-polished parts provide a finished, custom
look to open belt drives, and protection from
spinning parts. Fits Big Twins (except those with
diaphragm clutches) thru 1984. . . . . . . . . . .$37.99
42042 Fits 5-finger clutch hubs (shown)
42038 Fits 3-finger clutch hubs
Note: Will not work with the Equalizer motor plate.
12.12
2.5" dia.
3.5" dia.
Motor Nut
0.50"
86145
86150
86156
1.00"
86146
86151
86157
1.25"
86147
86152
86158
1.50"
86148
86153
86159
2.00"
86154
86160
86144 Outside guide for offset pulleys . . .$26.79
86155 Special motor nut washer
. . . . . . .$4.19
Primo Belt Drive Accessories
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Primary/Transmission Offset Kits by Primo
Belt Shrouds for Primo 'Brute IV' and 'V' Belt Drives
Chrome belt shroud improves appearance and adds safety. Includes
mounting hardware.
Flamed
667522 For 'Brute IV' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.99
667523 For 'Brute V' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$359.99
Plain
86264 For 'Brute IV' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$237.99
667526 For 'Brute V' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$359.99
Hand
Now you can offset the transmission and primary allowing the use of a
Controls
super-wide rear tire with these convenient offset kits!
• Kits use an extra length transmission mainshaft and sprocket shaft
extension to move the primary drive components to the left either
12mm, 25mm or 45mm
Lighting
• Includes primary spacer ring, crankshaft extender and nut, extra length
transmission mainshaft, extra length main drive 5th gear with needle
bearing and seal, extra wide pulley spacer, extra length clutch pushrod,
jackshaft extended (for 25mm kit only), starter jackshaft spacer kit (for
12mm kit only), front bearing support (for 45mm kit only) primary-toElectrical
transmission spacers and all necessary mounting hardware
• Wide swingarm and fender struts may be required for some applications
Fits Evolution® Big Twin models from 1991 thru 1999 and
Twin Cam 88® Dyna Glide and Softail® models from 1999 to present
667512 12mm (1/2") offset primary kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$612.61
667513 25mm (1") offset primary kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$636.88
667514 45mm (1.77") offset primary kit (includes front bearing support) . .$853.00
42655
Exhaust
Intake
42652
Engine
86266
Gaskets
86263
667527
86120
Tranny
& Clutch
’Brute IV’ Belt Shrouds and Clutch Dome by Primo
Belt shrouds are made from billet aluminum. Available vented or solid
and features pulley cut-outs for complete coverage. Clutch dome covers the clutch basket and is made of spun aluminum. Sold each.
Vented Belt Shrouds
42655 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$237.99
42656 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$264.99
Solid Belt Shrouds
42688 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$202.99
86263 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$212.99
Clutch Dome
42652 Chrome clutch dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.29
Polished Alternator Rotor Cover
86120 Polished alternator rotor cover . . . . . . . . . . . . . . . . . . . . . . .$27.99
Driveline
Pulley Covers for Primo ‘Brute IV’ and 'Brute V’
Belt Drives
Beautiful billet aluminum covers improve the appearance of your Primo
open belt drive. Includes covers, 1/4" transfer punch, #7 drill bit, 1/4-20 tap,
and hardware.
Ball Milled
86266
For ‘Brute IV’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$252.99
667525 For ‘Brute V’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$289.99
Wheels,
Tires
& Brakes
Frames
Smooth
667527
667524
For ‘Brute IV’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$259.99
For ‘Brute V’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$289.99
Forks
& Shocks
Sheetmetal
Custom Engine Nut
Replace the stock nut on your belt drive with our
acorn-style show-chrome version. . . . . . . . . . . . . . . . . .$16.49
42041 Fits Big Twins from 1955 thru 1990
(without compensating sprocket)
General
Note: These acorn engine nuts will not work with Karata belt drive kits.
12.13
Cross
Reference
Kevin Darling's Boyce Pro Street
The Ultimate Open Primary Belt Drives!
Monster 4" and 5"-wide belt drives make all others look weak by comparison. More than a great looking showpiece, these beauties are engineered to stand up
to high horsepower applications. Ingenious outer support plate is solidly mounted to the inner motor plate creating a very strong cage for the belt drive. The
outer plate also features dual hidden bearing supports that hold the clutch hub rock steady. This caged design keeps stress off of the transmission bearing, and
guarantees that everything stays in alignment. Machined from 6061 T-6 aluminum, then highly polished.
Kevin Darling's Boyce Pro Street Belt Drives feature:
• High quality Goodyear® belt
• Complete Scorpion clutch assembly by Barnett
• Dual hidden outer bearing support
071410
671413
Original 4" Belt Drive
071400 Fits FXR models from 1990 thru 2000 . . . . . . . . . . . . . . .$3,459.00
071410 Fits Evolution® Softail® models from 1990 thru 1999 $3,459.00
Driveline
K-Nuk 4" and 5" Belt Drives
671413 4" for Evolution® Softail® models
from 1990 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,849.00
from 1990 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,399.00
671415
671412
12
Comp 4" and 5" Belt Drives
from 1990 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,849.00
from 1990 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,399.00
12.14
Shank 4" and 5" Belt Drives
from 1990 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,849.00
from 1990 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,399.00
Primary Drive Belts
Bike Kits
& Trailers
8mm
Gates HTD® Replacement Primary Drive Belts
A wide selection of replacement primary drive belts to fit most belt drive units on the market today.
All belts, whether HTD® Rubber belts or HTD® Poly Chain® belts, are manufactured by the Gates
Rubber Company. All CC replacement belts are listed showing their pitch, construction, width,
number of teeth, and their most common applications.
11mm
13.8mm
11mm Gates HTD Rubber Primary Belts
42517 11/2"-wide, 92-teeth. Fits CC belt drive kit
#42589 . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99
43037 11/2"-wide, 96-teeth. Replaces belt
#30884 for Big Twins from 1936-early
1984 with open or closed primaries,
kick or electric start, and either
29/44-tooth or 28/44-tooth pulley
combinations . . . . . . . . . . . . . . . . . . . . .$94.99
43038 11/2"-wide, 99-teeth. Replaces #1185
belt for Big Twins from 1936-early
1984 with open or closed primaries,
kick or electric start, newer-style
combinations with a 31/47-tooth
pulley combination. Replacement
belt for CC belt drive kits #42585,
42586, 42587, and 42588 . . . . . . . . . .$59.99
®
13.8mm Gates HTD Poly Chain
Primary Belts
43022 11/8"-wide, 78-teeth. Stock replacement for the Harley-Davidson®
Original Equipment primary belt
drives on 4-speed FL, FXB and FXSB
models from 1980 thru 1983
(repl. OEM 40009-80) . . . . . . . . . . . .$139.99
43041 11/2"-wide, 78-teeth. Fits all Karata
HTD® belt drives for Big Twins from
1936-early 1984 with 4-speed transmission, open or closed primaries,
and kick or electric start . . . . . . . . .$146.99
®
®
14mm
14mm Gates HTD Rubber Primary Belts
43039 11/2"-wide, 78-teeth. Replaces #38078
belt for all Big Twin applications with
a 24/37-tooth pulley combination
using the Primo idler system . . . . .$146.99
®
8.07mm
8.07mm Gates HTD® Rubber Primary Belts
42611 11/2"-wide, 132-teeth . . . . . . . . . . . . .$74.99
HTD® and Poly Chain® are registered trademarks of the Gates Rubber Company.
Note: The belts offered for sale on this page have no warranty whatsoever.
Apparel
8mm Gates HTD® Rubber Primary Belts
HTD® belt drives for Sportster® models
from 1971 thru 1981 with kick or
electric start. Also replaces belt
#37117-1 for Sportster® applications
with 45/76-tooth pulleys . . . . . . . . . .$77.99
HTD® belt drives for Big Twins with
closed primaries, and kick or electric
start from 1936-early 1984. Also replaces belt #30853-1-ST. Replacement
belt for CC belt drive #42524 . . . . . .$77.99
43033 11/2"-wide (Bullseye) belt, 132-teeth.
Fits all Karata HTD® belt drives with tin
primaries, and replaces belt #30853-2-BE
for Big Twins with closed primary, and
kick or electric start from 1936-early
1984. Also replaces Phase III Bullseye
belt. Replacement belt for CC belt
drive kits #42525, 42526, 42527,
42528, 42529 and 42530 . . . . . . . . . .$77.99
43034 11/2"-wide, 144-teeth. Replaces belt
#37144-1 for Big Twins from 1936-early
1984 with open or tin primaries, and
47/76-tooth pulleys. Also replaces
Phase III applications . . . . . . . . . . . . . .$84.99
42514 15/8"-wide, 141-teeth. Fits CC belt
drive kit #42509 . . . . . . . . . . . . . . . . . .$66.49
42511 13/4"-wide, 132-teeth . . . . . . . . . . . . .$66.49
42512 13/4"-wide, 141-teeth . . . . . . . . . . . . .$66.49
43035 2"-wide, 144-teeth. Replaces #37144-2
belt for Big Twins from 1936-early 1984
with open primaries and 47/76-tooth
pulleys. . . . . . . . . . . . . . . . . . . . . . . . . .$111.49
42516 3"-wide, 132-teeth. . . . . . . . . . . . . . .$104.00
42515 3"-wide, 141-teeth. Fits CC belt drive
kits #42536, 42537 and 42542 . . . .$104.00
43036 3"-wide, 144-teeth. Fits all Karata HTD®
belt drives for Big Twins from 1936-early
1984 with open primaries. Also replaces
belt #37144-3 and Phase III applications.
Replacement belt for CC belt drive kits
#42533 and 42534 . . . . . . . . . . . . . . .$156.99
070970 135 tooth. Fits Brute IV on FXR and FLT
models from 1990 to present . . . .$176.99
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Dayco ‘Panther™’ 3" Primary Belts
Fit 3"-wide, 8mm open belt drives in racing
applications ONLY.
Driveline
42755 144-teeth . . . . . . . . . . . . . . . . . . . . . . .$131.99
42756 140-teeth . . . . . . . . . . . . . . . . . . . . . . .$131.99
42757 130-teeth . . . . . . . . . . . . . . . . . . . . . . .$131.99 Wheels,
42758 120-teeth . . . . . . . . . . . . . . . . . . . . . . .$131.99 Tires
& Brakes
Frames
Replacement Kevlar® Primary Drive Belts by BDL
Supertorque® Replacement Belts
A selection of primary drive belts to fit BDL ‘Bolt-In’ and Primo ‘Brute III’ belt drive kits.
42873 42mm-wide, 8mm, 130-teeth. Fits CC belt drive kits #42670, 42671, 42672, 42673
and Primo Brute III belt drives for FXR, FLT, FLHT, FLHS and Road King® models
with 68-tooth rear and 48-tooth front pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
42874 41mm-wide, 8mm, 138-teeth. Fits CC belt drive kits #42518, 42519, 42520, 42674
and Primo Brute III belt drives for Softail® and Dyna Glide models with 68-tooth
rear and 45-tooth front pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
42875 38mm-wide, 8mm, 138-teeth. Fits CC belt drive kit #42521 with 68-tooth rear and
45-tooth front pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
Replacement Goodyear® Supertorque® Kevlar®
belts. Used by some older aftermarket primary
belt drives such as Phase III.
43137 13/4"-wide, 8.07mm, 132-teeth .$126.99
43138 3"-wide, 8mm, 140-teeth . . . . . . .$174.99
43139 4"-wide, 8mm, 140-teeth . . . . . . .$230.99
Forks
& Shocks
Sheetmetal
Note: The Goodyear, Supertorque and Kevlar registered
trademarks are the property of their respective holders
General
12.15
Cross
Reference
Chain Drive Primary Kits
for Big Twins
Great for replacing internal stock
primary or for custom applications.
Each kit includes a 24-tooth compensating sprocket, clutch hub,
clutch pack, chain, adjuster, sliding
cam and nut.
RevTech® Complete Primary Drive Kits
For Softail® and Dyna Glide Models from 1991 thru 1993
58590 Heavy-duty kit with Kevlar® clutch plates . . . . . . . . . . . . . . . . . . . .$859.99
58592 Stock replacement kit with organic clutch plates . . . . . . . . . . . . .$799.99
For Softail® and Dyna Glide Models from 1994 thru 1997
For 1990 5-Speed Rubber-Mount Models ONLY
Kits with Chrome Inner Primaries
58650 Fits Softail® models from 1994 thru 1997 . . . . . . . . . . . . . . . . . . .$1,446.99
58653 Fits Softail® frames with 1" offset from 1989 thru 1993
(requires the use of a CC #17284 Primary Spacer) . . . . . . . . . . .$1,408.99
Kits with Black Inner Primaries
Driveline
12
These kits have everything needed from the outer cover to the inner cover
and all the parts in-between. Each kit includes: a chrome or black inner
primary, chrome outer primary cover, RevTech® Kevlar® clutch, chain drive
kit, inspection cover, derby cover, all mounting hardware, seals and
gaskets. Custom bike builders who prefer the Kevlar® clutch can also use
CC #’s 58650 or 58698 on 1998 and newer models, or CC #58653 for
wide drive applications where lower primary drive ratio’s are desired.
Chain Primary and Competitor Clutch Kits
by Belt Drives Limited
BDL uses only the finest materials and workmanship in their chain primary
kits and components, and is proud to offer their competitor clutch.
Competitor Clutch features 9 springs and shoulder bolts for simple spring
adjustment, polished pressure plate and Kevlar® clutch plates.
42678 Fits Big Twins from 1990 to present. Includes Competitor Clutch,
basket, hub, ring gear, 1989-1993 pinion gear, 25-tooth splined
front motor sprocket and a C.C. Rider® primary chain . . . . . . . .$829.99
42687 Fits Big Twins from 1986 thru 1989. Includes Competitor
Clutch, basket, hub, ring gear, front sprocket and
C.C. Rider® chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$829.99
42679 Fits Big Twins with electric start from 1970-early 1984. Includes
Competitor Clutch, basket, hub, ring gear, front sprocket
and a C.C. Rider® primary chain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$829.99
Competitor Clutch and Clutch Basket Kits
42681 Fits electric start Big Twins from 1990 to present . . . . . . . . . . . . .$714.99
42891 Fits electric start Big Twins from 1986 thru 1989 . . . . . . . . . . . . . .$714.99
Clutch Basket ONLY
42690 Fits Big Twins from 1990 to present . . . . . . . . . . . . . . . . . . . . . . . . . .$369.99
Primary Drive Replacement Hardware
58670 Derby cover screw kit for models from 1989 thru 1993 . . . . . . . .$15.29
58683 Inspection cover screw kit for Softail® and Dyna Glide models
from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.29
from 1993 thru 1994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
from 1989 thru 1992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.39
58674 Outer primary mounting kit for Softail® and Dyna Wide Glide®
models from 1989 thru 1994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99
58685 Starter mounting kit for Big Twins from 1989 thru 1999 . . . . . . . .$3.79
58676 Inner primary mounting kit for Softail® models from 1989
thru 1994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
250735
Cal-Products Aluminum Inner Primary Covers
These replacement inner primary covers from Cal-Products are made of
heat treated 356-T6 aluminum that is stress relieved to prevent cracking.
Both castings have been reinforced making them “beefier” than original
equipment.
Note: Because of their thicker than stock construction, some aftermarket belt drives may
require additional clearance.
250734 Fits Big Twins 1965-1969 (rear chain drive models only) . . . . . . .$396.99
250735 Fits Big Twins 1970-1982 (rear chain drive models only) . . . . . . .$396.99
12.16
Inner & Outer Primaries
STEPPED
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Exhaust
Intake
Cast Late-Style Inner Primary Housings
for Softail® and Dyna Glide Models
GROOVED
Precision-machined cast aluminum inner primary housings are polished
Engine
smooth and chrome-plated for a brilliant finish. Also available with a raw
cast finish which is ideal for custom painting, or black. Includes primary
bearing, bushings, seals, and retaining ring.
For Softail® Models
Fit all models from 1989 thru 1999.
28821 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99 Gaskets
28819 Black wrinkle (repl. OEMs 60630-90, 60630-94) . . . . . . . . . . . . . .$299.99
28822 Raw casting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99
Ness-Tech® Chrome Billet
Inner/Outer Primary System
Here’s the ultimate billet inner/outer primary system. The curvaceous
design changes the look of current primary system completely. Both
inner and outer primary covers are machined from 150 pound blocks
of billet aluminum. These kits include chrome billet inner and outer
primary covers, two primary cover gaskets, and chrome hardware.
04921 ‘Grooved’ for Softail® models from 1994 to present . . .$2,122.00
04922 ‘Stepped’ for Softail® models from 1989 thru 1993 . . . .$2,122.00
04923 ‘Stepped’ for Softail® models from 1994 to present . . .$2,122.00
04964 ‘Smooth’ for Softail® models from 1994 to present . . . .$2,122.00
04924 Replacement gasket kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.99
For Dyna Glide Models
Tranny
Fit all models from 1991 to present.
& Clutch
28831 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99
28832 Black wrinkle (repl. OEM 60691-94) . . . . . . . . . . . . . . . . . . . . . . . . .$279.99
28833 Raw casting (repl. OEM 60663-95) . . . . . . . . . . . . . . . . . . . . . . . . . . .$269.99
Replacement Parts
92200 Starter shaft bushing, 1989 thru 1993 (repl. OEM 33445-89) . . . .$4.69
75298 Original Equipment inner primary bushing for Big Twins
from 1989 thru 1993 (repl. OEM 33445-89) . . . . . . . . . . . . . . . . . . . . .$9.59
92201 Starter shaft bushing 1994 thru 1999 (repl. OEM 33445-94) . . . . .$2.49
92205 Sleeve for starter shaft bushing 1989 to 1993 (pack of 5) . . . . . .$32.89
92203 Primary bearing (repl. OEM 9135) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.99
58677 Inner primary mounting kit for 1989 thru 1993
Softail® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99
28823 Retaining ring for primary bearing (repl. OEM 60678-85) . . . . . .$10.00
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Inner Primaries by Delkron
Cast from 356-T6 aluminum, these housings are ready-to-use with the starter bushing, oil
seal, transmission shaft bearing and tensioner anchor plate already installed.
17071 Fits Softail® models from 1994 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$298.39
17070 Fits Softail® models from 1990 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$298.39
17089 Fits FXR models from 1989 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$425.99
12.17
Sheetmetal
General
Cross
Reference
28282
28860
28288
28289
Steel ‘Tin-Style’ Primaries for Electric-Start
Big Twins
Chromed-steel, inner and outer ‘tin-style’ primaries for 4-speed Big
Twins from 1965-early 1984 with electric start and forward controls.
Includes hardware and starter shaft bearing.
Note: Will not work with diaphragm clutches.
Driveline
Late-Style Outer Primary Covers
Chrome-plated, die-cast aluminum outer primary covers are designed to fit Softail®
and Dyna Glide models. Includes starter shaft bushing and features reinforcing ribs
for increased strength and rigidity.
28820 3-hole cover fits Softail® and Dyna Glide models from 1995
to present (repl. OEM 60543-95) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$224.99
28860 5-hole cover fits Softail® and Dyna Glide models from 1999
to present (repl. OEM 60543-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.99
28077 Fits 1989 thru 1994 Softail® and Dyna Glide models
(repl. OEM 60543-89) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$230.99
92213 Replacement starter shaft bushing from 1989 thru 1993
(repl. OEM 33446-89) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
92214 Replacement starter shaft bushing from 1994 to present
(repl. OEM 33446-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.49
93632 Replacement magnetic drain plug (repl. OEM 739A) . . . . . . . . . . . . . . . . . .$12.49
Outer Covers
28288 1965 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$97.49
28289 1970-early 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$97.49
Inner Cover Adaptor
Permits installation of early primaries (CC #’s 28286 or 28287) on
1970-early 1984 models when no electric starter is used.
28282 Includes hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.49
28281
28280
Note: 5-hole outer primary cover (CC #28860) will also fit Softail® and Dyna Glide models from 1995 thru
1998 with a 5-hole derby.
28286
28287
Steel ‘Tin-Style’ Primaries for Kick-Start Big Twins
Chrome-plated primaries for 4-speed Big Twins are accurate reproductions for Original Equipment applications. Mounting hardware
included.
12
Outer Covers
28286 1936 thru 1954 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$88.49
28287 1955 thru 1964 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$88.49
Inner Covers
28281 1936 thru 1954 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.49
28280 1955 thru 1964 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.49
Alternator Cover
Use on alternator Big Twin motors to protect your alternator
and help cool it by acting as a heat sink. Has mounting lug
for our belt shroud built in. Made of aluminum casting and
highly recommended for all open belt drive installations.
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.59
42039 Highly polished finish
12.18
28066
Detail
28801
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Chrome Vented Primary Covers
These covers are designed exclusively for use with aftermarket primary belt
drive units that have belts up to 13/4"-wide including our BDL ‘Bolt-In’ kits
(CC #’s 42519, 42520) and our Primo ‘Brute III’ kits (CC #’s 43104, 43106).
They feature numerous vent slots for improved air flow to keep your belt
drive running cool and promote extended belt life. . . . . . . . . . . . . . . . .$196.99
28871 Fits all Softail® and Dyna Glide models from 1995 thru 1998
Note: CC #28871 may also be installed on Softail® and Dyna Glide models from 1999 to present
if a 3-hole derby cover is purchased and installed in place of the Original Equipment part.
Hand
Controls
28065
Lighting
Cast Early-Style Chrome Outer Primary Covers
Reinforced outer primary covers for 4-speed Big Twin and 5-speed Softail
models from 1970 thru 1988. The starter shaft support bearing is installed
and additional thrust washers are provided for belt and chain drive. Ready
Electrical
to mount on 8-hole primaries with flat boss for ninth hole. FL cover has
floorboard mounting tab. Chrome hardware included.
28065 Fits 4-speed FX and 5-speed Softail® models from 1971 thru 1988
(small dowel pins) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$164.99
251705 Cover without bearing. Fits 4-speed FX and 5-speed Softail®
models from 1971 thru 1988 (small dowel pins) . . . . . . . . . . . . . .$149.99 Exhaust
28066 Fits 4-speed FL models from 1970 thru 1984 with chain
final drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$164.99
250725 Fits FXST models from 1986 thru 1988. Replaces OEM 60507-86A.
Intake
(Cover is machined for O-ring derby cover seal and large
diameter alignment pins) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.99
®
Cast Early-Style Chrome Inner Primary Housing
Slotted Primary Cover for Big Twins
This vented cover provides additional cooling and a custom look.
Starter bearing not included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$148.99
250703 Fits 4-speed Big Twins 1970-early 1984 with primary belt drive
Features precision-machining, thick wall die-cast aluminum, and reinforced
starter and mainshaft bearing support areas. Machined at front mounting
blocks for exact adjustment on various engine/transmission combinations.
Accepts early or late starter mounts. systems. Installed oil line fittings and
bushing for thru-the-case shifters. Complete kit includes alternator O-ring,
brass oil line fittings, chain adjuster retaining shoe with hardware, and
chromed Bendix starter drive pivot bolt. Fits 4-speed Big Twins from 1970early 1979 and late 1979 thru 1982 models with Prestolite starter and chain
final drive.
28801 Complete inner primary kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$529.99
28063 Inner primary housing ONLY (without kit) . . . . . . . . . . . . . . . . . . .$441.79
28802 Inner primary hardware kit ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.19
Engine
Gaskets
Tranny
& Clutch
Primary Cover Mounting Parts
Replacement parts including a set of 15 chrome sockethead screws to
mount primary cover, derby cover and inspection plate on 4-speed Big
Twins from 1965-early 1984.
28817 Chrome screw set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.99
28818 Bronze starter thrust washers (replaces OEM 31502-65)
sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.69
28074 Starter shaft bearing (replaces OEM 9063) sold each . . . . . . . . . . .$6.49
Primary Chain Housing Top Screw
Fits inner primary on 4-speed Big Twins from 1965 thru 1986.
28811 Replaces OEM 31478-65A (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . .$47.39
’Diamond Grill’ Belt Drive
Outer Primary Covers
Reinforced die-cast outer primaries for 4-speed Big Twins from 1970-early
1984. FL cover has cast-in floorboard mounting tab. Show-chromed
‘Diamond Grill’ venting provides cooling for belt drive. Complete with
chrome hardware, starter shaft bearing and bearing spacers.
28060 Fits 4-speed FX models from 1971-early 1984 . . . . . . . . . . . . . . . . .$199.99
28067 Fits 4-speed FL models from 1970-early 1984 . . . . . . . . . . . . . . . . .$199.99
15156 Replacement derby cover with screws . . . . . . . . . . . . . . . . . . . . . . . .$23.19
98835 Diamond Grill inspection cover with screws . . . . . . . . . . . . . . . . . . .$21.29
Driveline
Wheels,
Tires
& Brakes
Frames
Primary Chain Oiler Fitting
Fits inner primary on 4-speed Big Twins from 1965-early 1984.
28813 Replaces OEM 60549-70 (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.09
Oil Line and Vent Hose Fitting
Used throughout the motorcycle, but commonly on inner primary as a vent
return.
28815 Replaces OEM 63533-41 (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.49
Forks
& Shocks
Chain Tensioner Plate and Nut Kit
Fits 4- and 5-speed Big Twins with primary chain from 1965 thru 1989.
28816 Replaces OEMs 39992-65A, 39998-65 and 1783 . . . . . . . . . . . . . . .$55.19
Sheetmetal
Note: CC #12282 adjuster shoe fits the above plate.
General
12.19
Cross
Reference
Primary Spacers
Primary/Transmission Offset Kits by Primo
Now you can offset the transmission and primary allowing the use of a
super-wide rear tire with these convenient offset kits!
• Kits use an extra length transmission mainshaft and sprocket shaft
extension to move the primary drive components to the left either
12mm, 25mm or 45mm
• Includes primary spacer ring, crankshaft extender and nut, extra length
transmission mainshaft, extra length main drive 5th gear with needle
bearing and seal, extra wide pulley spacer, extra length clutch pushrod,
jackshaft extended (for 25mm kit only), starter jackshaft spacer kit (for
12mm kit only), front bearing support (for 45mm kit only) primary-totransmission spacers and all necessary mounting hardware
• Wide swingarm and fender struts may be required for some applications
Driveline
Fits Evolution® Big Twin models from 1991 thru 1999 and
Twin Cam 88® Dyna Glide and Softail® models from 1999 to present
667512 12mm (1/2") offset primary kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$612.61
667513 25mm (1") offset primary kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$636.88
667514 45mm (1.77") offset primary kit (includes front bearing support) . .$853.00
12
86615
Offset Kits for Twin Cam 88® Softail® Models
These kits move the primary and the rear belt position 20mm or 25mm
outward to provide clearance for larger tires, while leaving the engine in
its original position. Includes precision mainshaft, clutch pushrod, special
starter bushing, primary spacer and hardware kit. Fit all Softail® models
from 2000 to present.
86615 20mm offset kit (shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,223.00
686216 25mm offset kit (uses the Original Equipment pulley, but
includes a longer mainshaft 5th gear) . . . . . . . . . . . . . . . . . . . . . .$1,499.00
Engine-to-Primary Spacers
These aluminum spacers permit the use of the
latest extra-wide rear tires with custom frame
applications. . . . . . . . . . . . . . .from $82.19 to $167.99
Raw Finish
Chrome
17287
n/a
17288
n/a
95148
17270
17379*
17282
17442
17283
17443
17284
17529
17444
1/4" offset
3/8" offset
1/2" offset
3/4" offset
1" offset
11/2" offset
45mm offset
*CC #17379 has a polished finish
Ness-Tech® Primary Spacer Kit
Spaces the primary out 1/2". Includes o-rings,
longer bolts and billet spacer. . . . . . . . . . . . .$108.49
05798 For primary set-ups to run up to
200-series wide tires on custom frames
Offset Transmission Plates
These 1-inch offset mounting plates for 5-speed
Softail® transmissions, make assembly of Wide
Drive swingarm or extra wide rigid-framed customs a snap. The hot set-up for building that
extra-wide ride.
17285 Chrome mounting plate . . . . . . . . . .$36.59
17286 Raw steel mounting plate . . . . . . . . .$25.09
1/4" Offset Driveline Kit
In addition to a chrome primary spacer this kit
includes a chrome transmission plate, bolts,
O-rings, sprocket shaft spacer and rear pulley
spacer. Permits the use of 1/2" wider tires in a
stock chassis. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142.49
12.20
Primary Accessories
Bike Kits
& Trailers
28815
28813
25308
Seats
& Bags
25305
Magnetic Drain Plug
and Washer
For Original Equipment or CC inner
primaries. Fits 4-speed Big Twins
1965 thru 1986.
28812 Replaces OEM
60348-65A
(bag of 5) . . . . . . . .$38.19
Foot
Controls
25333
Inner Primary Mounting Kit
Includes stainless steel inside bolts with locktabs and pins,
and chrome outer bolts with chrome washers. . . . . . . . . .$25.99
Hand
Controls
Inner Primary Accessories
28815
28813
25308
54073
25333
54008
25305
54007
Apparel
Vent hose fitting (repl. OEM 63533-41) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.49
Chain oiler fitting (repl. OEM 60549-70) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.09
Mainshaft seal (repl. OEM 12018) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
Mainshaft seal (repl. OEM 12052) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99 Lighting
Shifter shaft seal (repl. OEM 60641-74) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
Shifter shaft seal (repl. OEM 11148) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
Alternator O-ring (repl. OEM 11125) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.59
Electrical
Alternator O-ring (repl. OEM 11147) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49
Exhaust
48231
Intake
Engine
Colony Chrome Hex Head Filler Plugs
and Caps
Designed for easy installation and removal with a standard
15/16" wrench.
36061 Primary filler cap for Sportster® models
from 1971 thru 1976 . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.39
36060 Clutch adjusting hole cap for Sportster® models
from 1971 thru 1976 . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.39
36059 Primary filler cap or clutch adjusting hole cap
for Sportster® models from 1977 thru 1985
(replaces OEM 34742-77B) sold each . . . . . . . . . . . .$29.49
36252 Primary filler cap or clutch adjusting hole cap
for Sportster® models from 1986 thru 1990
(two required per motor) sold each . . . . . . . . . . . . .$29.49
Timing and Transmission Filler Plugs
Fits Big Twin and Sportster® timing holes and oil tanks
with a 5/8"-18 thread. Also fits the transmission filler
hole on all 45s thru 1940.
36186 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
48263
Gaskets
Chrome Inner Primary Cover Trims by KüryAkyn™
These easily-installed chrome accents give the look of a fully chrome-plated inner
primary for a fraction of the cost. Because of the die-cast construction, a much more
precise fit, and a classier three-dimensional look results. Nicely formed edges give these
covers a creamy, flowing appearance that enhances the entire primary area. Four mounting points permit easy installation in minutes and ensure secure, quiet operation (not
compatible with rear suspension lowering kits).
48231 Fits Softail® models from 1989 to present (except FLSTS models) . . . . . . . . . . . . .$98.89
48261 Fits Dyna Glide models (except FXDWG) from 1991 thru 1999 . . . . . . . . . . . . . . .$89.99
48262 Fits Dyna Wide Glide® models from 1993 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . .$89.99
48263 Fits FLT, FLHT, FLHS and Road King® models from 1990 to present . . . . . . . . . . .$89.99
250751
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Primary Case Saver
for Big Twins
This simple yet effective
device fits over the inner
primary starter boss and
protects it from damage
caused by a loose or worn
rear chain. Especially effective on lowered or custom
bikes. Snap on application no modifications required.
Fits all 4-speed Big Twins
1965-1984.
250731 . . . . . . . . . . . . .$23.19
250750
500428
Primary Case Plugs for Sportster Models
®
Forks
& Shocks
Chrome oil fill and clutch adjustment hole plugs for Sportster® models from 1971 thru
1990. Available with stock type slotted or custom hex heads. Sold each.
SheetSlotted Plugs
metal
250751 Oil fill and clutch adjusting hole plug (13/8"-12) for Sportster®
models from 1977 thru 1985 (repl. OEM 34742-77A) . . . . . . . . . . . . . . . . . . . . . . . .$18.99
250750 Oil fill and clutch adjusting hole plug for Sportster® models
from 1986 thru 1990 (repl. OEMs 25465-86, 34742-86) . . . . . . . . . . . . . . . . . . . . . . .$18.99
Hex Head Plugs
500428 Oil fill and clutch adjusting hole plug for Sportster® models
from 1986 thru 1990 (repl. OEMs 25465-86, 34742-86) . . . . . . . . . . . . . . . . . . . . . . .$23.49
12.21
General
Cross
Reference
Compensating Sprockets
14246
20306
12222
Vibration Dampers for Big Twin and Sportster Models
®
Fisher Concepts vibration dampers for both chain and belt primary Big Twin, Sportster ,
and Buell® motors. Each unit includes the damper unit and a custom sprocket or pulley.
Stock compensators are eliminated on Big Twin models to ensure the accurate alignment
of the primary drive.
®
For Chain Primary Drive
47503 25-tooth sprocket for Big Twin models from 1994 to present . . . . . . . . . . . . . .$399.99
47504 24-tooth sprocket for rubber-mounted Big Twins from 1984 thru 1993
and Softail® models from 1991 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
47505 24-tooth sprocket for Softail® models and Shovelheads
from 1972 thru 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
47501 35-tooth sprocket for 5-speed sportster® models from 1991 thru 2003,
and Buell® models from 1991 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99
47502 34-tooth sprocket for 4-speed Sportster® models from 1977 thru 1990 . . . . .$399.99
For Chain Primary Drive with 1" Offset
647506 25-tooth sprocket for Big Twin models from 1994 to present . . . . . . . . . . . . . .$439.99
For Belt Primary Drive
47512 For 13/4"and 2"-wide primary belt drive systems . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99
47513 For 3"-wide primary belt drive systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99
12218
12112
Compensating Sprocket Components
Restore your compensating sprocket to peak performance. Fit most
Big Twins with primary chain from 1970 to present.
Sliding Cams for Big Twins
12222 Fits most models from 1970 thru 1983
(repl. OEM 40299-70) . . . . . . . . . . . . . . . . . . . . . . . . . .$28.49
12764 Fits all models from 1985 to present
(repl. OEM 40299-83A) . . . . . . . . . . . . . . . . . . . . . . . . .$27.39
Sprocket Nut for Big Twins from 1970 thru 1990
12112 Stock length (repl. OEM 40392-70) . . . . . . . . . . . . .$10.99
14245 1" extended (repl. OEM 40392-70) . . . . . . . . . . . . . .$20.69
14246 1/2" extended (repl. OEM 40392-70) . . . . . . . . . . . .$19.44
Driveline
Sprocket Nut for Big Twins from 1991 to Present
12078 Stock length (repl. OEM 40392-91) . . . . . . . . . . . . . .$4.99
14247 1" extended (repl. OEM 40392-91) . . . . . . . . . . . . . .$20.69
14248 1/2" extended (repl. OEM 40392-91) . . . . . . . . . . . .$19.44
Compensating Sprockets for Big Twins
from Late 1970 thru 1986
12218 22-tooth (repl. OEM 40280-70) . . . . . . . . . . . . . . . . .$59.54
12232 23-tooth (repl. OEM 40282-70) . . . . . . . . . . . . . . . . .$59.54
12233 24-tooth (repl. OEM 40275-70) . . . . . . . . . . . . . . . . .$59.54
Compensating Sprockets for Big Twins
from 1985 to Present
14234 24-tooth for Softail® models 1991 thru 1993
and 5-speed rubber-mount models from 1985
thru 1990 (repl. OEM 40269-85A) . . . . . . . . . . . . . . .$60.69
14242 25-tooth for all Big Twin models from 1994
to present (repl. OEM 40308-94) . . . . . . . . . . . . . . . .$60.69
12
Compensating Sprocket Assemblies
Replace your worn out Original Equipment unit with one of these complete assemblies.
Complete Assemblies
Each of these assemblies includes the shaft extension, cover with springs, sliding cam,
engine nut and sprocket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$144.99 to $149.99
14241 25-tooth for all Big Twin models from 1994 to present
14249 Same as CC #14241 with 1" offset
14235 24-tooth for Softail models from 1991 thru 1993
14236 Same as CC #14235 with 1" offset
14238 24-tooth for Softail® models from 1985 thru 1990
14231 24-tooth for 5-speed rubber-mount models from 1985 thru 1990
Cover Assemblies with Springs
Available for most models from 1985 to present. . . . . . . . . . . . . . . . . . . . . . . . . . $47.29 to $54.99
14233 Fits 5-speed rubber-mount models from 1985 thru 1990 (repl. OEM 40267-85)
14240 Fits Softail® models from 1985 thru 1990 (repl. OEM 40384-83A)
14237 Fits all Big Twins from 1991 to present (repl. OEM 40384-91)
12.22
Sprocket Shaft Extensions
20306 Stock length for 4-speed Big Twins from late 1970
thru 1983, 5-speed Big Twins from 1980-early 1984
and Softail® models from 1984 thru 1990
(repl. OEM 40375-70) . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
14232 Stock length for Softail® models from 1991
to present and 5-speed rubber-mount
Big Twin models from 1985 thru 1990
(repl. OEM 40266-85) . . . . . . . . . . . . . . . . . . . . . . . . . .$32.09
14244 1/2" extended for 5-speed rubber-mount
(repl. OEM 40266-85) . . . . . . . . . . . . . . . . . . . . . . . . . .$31.89
14243 1" extended for 5-speed rubber-mount
(repl. OEM 40266-85) . . . . . . . . . . . . . . . . . . . . . . . . . .$40.29
95150 1" extended for Softail® models from 1991
to present (repl. OEM 40266-85) . . . . . . . . . . . . . . .$111.99
080075 .500" extended for Softail® models from 1985
thru 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99
080076 .500" extended for Softail® models from 1991
to present and FXR and Touring models from
1985 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99
Engine Sprockets
Motor Sprockets
for Big Twin Models
Apparel
Offset Sprocket Kits for 4-Speed Big Twin Models
The perfect answer for problems posed by the mounting of custom wide rear tires or
wheels. Includes offset transmission sprocket, precision machined rear sprocket spacer
plate and hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49
25657 Kit with 22-tooth sprocket
Replacement Sprockets
Specifically for the kits listed above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.99
18385 22-tooth
18386 23-tooth
18387 24-tooth
Note: Designed to ease problems
encountered on some custom
applications. 1979 through 1985
FX models require substantial
modifications including
changeover to a Prestolite starter.
Custom Chrome® will happily provide a detailed instruction sheet
before your purchase so that you
can better determine its benefits
for your particular application.
17384
Splined
Fit Big Twins from 1955 thru 1984.
17384 23 tooth . . . . . . . . . .$22.99
17385 24 tooth . . . . . . . . . .$22.99
18337 25 tooth . . . . . . . . . .$24.49
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Compensating Sprocket Shaft
Extension and Spacer Kits
by Daytec™
Exhaust
Works in conjunction with engine-to-primary spacers.
Fits most Big Twin engines. Includes sprocket nut.
38650 1/2" sprocket kit for 180 / 200 frames . . .$139.94
32263 1 7/16" sprocket kit for 230 / 250 frames .$147.99
38641 Engine / primary spacer kit for
180 / 200 frames . . . . . . . . . . . . . . . . . . . . . .$102.99
32264 Engine / primary spacer kit for
230 / 250 frames . . . . . . . . . . . . . . . . . . . . . .$188.24
17382
Tapered
Fit Big Twins from 1936 thru 1954.
17382 23 tooth . . . . . . . . . .$22.99
17383 24 tooth . . . . . . . . . .$22.99
18336 25 tooth . . . . . . . . . .$24.49
Intake
Engine
Gaskets
Tranny
& Clutch
Custom Sprocket Nuts
070812
500610
100168
Chrome acorn style sprocket shaft nuts for Big Twins
and Sportster®. Sold each.
070812 Fits Big Twin models from 1936
thru 1954 (11/16"-18) . . . . . . . . . . . . . . . . .$10.99
070813 Fits Big Twin models without compensating sprocket from 1955
to present (7/8"-14) . . . . . . . . . . . . . . . . . . .$16.99
070814 Fits Sportster® models from 1957
thru 2003 (3/4"-16) . . . . . . . . . . . . . . . . . . . .$9.99
Driveline
Wheels,
Tires
& Brakes
Stock Type Motor Sprocket Nuts
500610 Fits Big Twin models from 1930
thru 1954 (11/16"-18) . . . . . . . . . . . . . . . . . .$8.84
Frames
Sprocket Nut Lock Tabs
100168 Fits 5-speed Big Twins from 1980 thru 1984
(repl. OEM 33335-79) pack of 10 . . . . . . . .$7.99
25396 Fits 4-speed Big Twins from 1941-early 1983
(repl. OEM 35216-36) pack of 10 . . . . . . . .$5.84
Forks
& Shocks
Motor Sprocket Nut and Washer
Sheetmetal
Fits Big Twins 1955 to present.
250971 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99
General
12.23
Cross
Reference
Primary Chain & Tensioners
C.C. Rider® Primary Chains
C.C. Rider® chain’s are manufactured to withstand the heavy-duty demands of the
Harley-Davidson® engine. These competitively priced double and triple row chains will fit
most applications.
17415 82-link double row chain for 4-speed Big Twins thru 1986 and Dyna Glide
and Softail® models from 1984 to present (repl. OEM 40007-36A) . . . . . . . . . . .$51.99
17416 76-link double row chain for 5-speed Big Twins (except Dyna Glide
and Softail® models) from 1980 to present (repl. OEM 40037-79) . . . . . . . . . . . .$48.99
17417 94-link triple row chain for Sportster® models from 1957 thru 2003
(repl. OEM 40005-57) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.99
33036
33039
Driveline
Motor Factory® Primary Chains
by Diamond®
12
Premium quality, made in USA endless primary chains
for Big Twin and Sportster® models.
33035 82-link double row chain for 4-speed Big Twins thru
1986 and Dyna Glide and Softail® models from 1984
to present (repl. OEM 40007-36A) . . . . . . . . . . . . . . .$63.44
33039 76-link double row chain for 5-speed Big Twins (except
Dyna Glide and Softail® models) from 1980 to present
(repl. OEM 40037-79) . . . . . . . . . . . . . . . . . . . . . . . . . . .$58.54
33036 94-link triple row chain for Sportster® models
from 1957 thru 2003 (repl. OEM 40005-57) . . . . . .$58.39
Premium® Inner Primary
Mainshaft Bearing
Fits 4-speed Big Twins 1965-early 1984. High quality ‘sealedtype’ replacement bearing has built-in lubrication and side
seals to keep dirt and grime out.
20015 Replaces OEM 9061 (sold each) . . . . . . . . . . . . . . . . .$18.99
H-B 125 Hydraulic Automatic
Primary Chain Tensioner
by Oregon Hot Bike
Primary Chain Adjuster Assembly
070186 Fits KH, XL, XLH models from 1954 thru 1976,
and XLCH models from 1970 thru 1976
(repl. OEM 39975-52B) . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99
12.24
Designed to withstand the punishment that 100+ cubic inch engines deliver
to the primary drive. Unlike the standard chain tensioner that works off of
a spring pressure, this unit operates off of primary fluid and works similar
to the hydraulic lifter in an engine. It is completely self-contained. Once
installed, there is no need to adjust the primary chain again.
• Reduces vibration
• Reduces chain wear
• Reduces chain rebound
• Designed for high-horsepower engines
• Smoother shifting
• Prevents chain from scoring inner parts of primary (a main cause of
primary fluid contamination)
60119 Fits Big Twins with wet primary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99
Primary Chain Tensioners
12282
Apparel
Bike Kits
& Trailers
Seats
& Bags
12297
Foot
Controls
12281
Hand
Controls
12240
17431
17065
Lighting
17069
Electrical
Primary Chain Adjusters and Parts
12156
High-quality reproductions of their Original Equipment counterparts
designed for years of faithful service.
12157
Hayden M6 Primary Chain Tensioners
Keeps proper tension on the primary chain for smoother shifts, reduced
vibration and increased primary chain and sprocket life. Easy installation.
All required parts except primary gasket included.
12171 Fits all Big Twin models from 2001 to present . . . . . . . . . . . . . . .$98.99
12240 Fits all Big Twin models (including Twin Cam 88® models)
from 1965 thru 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.99
12157 Fits 5-speed Sportster® models from 1991 thru 2003 . . . . . . . . .$98.99
12156 Fits 4-speed Sportster® models from 1977 thru 1990 . . . . . . . . .$98.99
Replacement Parts
12155 Replacement shoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.94
070241 Spring set for Big Twins from 1965 to present and Sportster®
models from 1977 thru 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.99
070242 Guide plates for Big Twins from 1965 to present . . . . . . . . . . . .$67.99
070243 Shim pack for Big Twins from 1965 thru 1993 . . . . . . . . . . . . . . .$14.99
070244 Shim pack for Big Twins from 1994 to present . . . . . . . . . . . . . . .$14.99
Primary Chain Adjuster Plate Kit
Includes inner and outer plates, and hardware, and replaces
OEMs 39992-65C, 39998-65, and 1783.
17065 Fits all Big Twins from 1965 to present . . . . . . . . . . . . . . . . . . . . .$26.99
Exhaust
Adjusting Shoes
Fit most models from 1957 to present. Sold each.
12281 Fits Sportster® models from 1957 thru 1976
(replaces OEM 39978-58) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
12297 Fits Sportster® models from 1977 thru 1990
(replaces OEM 39966-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.69
12282 Fits Big Twin models from 1965 to present
(replaces OEM 39976-65B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.99
Intake
Adjusting Plate Components
Fit Original Equipment and Custom Chrome® inner primaries on Big Twin
models from 1965 to present.
17069 Inner chain tensioner (repl. OEM 39990-65) . . . . . . . . . . . . . . . . .$35.37
17068 Outer tensioner plate (repl. OEM 39993-65) . . . . . . . . . . . . . . . . . .$7.19
17431 Tensioner bolt kit (repl. OEM 39992-65C) . . . . . . . . . . . . . . . . . . . . .$4.89
Engine
Gaskets
Tranny
& Clutch
Driveline
070183
Wheels,
Tires
& Brakes
Chain Adjuster Brace for Sportster® Models
Frames
Fits KH, XL, XLH models from 1954 thru 1976, and XLCH models
from 1970 thru 1977. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99
070188 Replaces OEM 39980-54
Forks
& Shocks
070179
Primary Chain Adjuster Linings and Retainers
for Sportster® Models
Sheetmetal
070183 Adjuster lining kit for Sportster® models from 1958 thru 1976. Includes
lining and retainer (repl. OEMs 39978-58, 39979-58A . . . . . . . .$11.49
070179 Retainer ONLY for Sportster® models from 1958 thru 1976
(repl. OEM 39979-58A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.99
General
12.25
Cross
Reference
Transmission Sprockets & Pulleys
1954-E1979
XL MODELS
L1979-E1984
XL MODELS
Mainshaft Sprocket
Spacers
Get the proper clearance between
the transmission sprocket and case
on 1980 and later 4-speed chain
drive models, and earlier style
transmissions in conjunction with
aftermarket sprockets. . . . . .$10.99
12225 Replaces OEM 35079-80
(pack of 5)
L1984-1990
XL MODELS
Driveline
Install 150-series tires on 5-speed
Big Twin models by converting
from belt to chain drive. Offset
24-tooth front sprocket and spacer
moves the rear drive chain away
from the tire. The stock final drive
ratio on 5-speed models is 2.1875.
Installation in conjunction with a
51-tooth rear sprocket will change
the ratio to 2.125, with a 48-tooth
rear sprocket it will lower to 2.000
which is ideal for stroker motors.
Fits Softail® models from 1986 to
present when used with 1973 thru
1985 4-speed rear sprockets, and
FXR models from 1985 thru 1994
when used with rear sprockets
originally for FXR’s. . . . . . . .$67.99
12
1980-1985
4-SPEED
1980-1984
5-SPEED
Premium® Transmission Sprockets
Heavy-Duty Transmission Sprockets
Precision-machined American-made transmission sprockets are plated for corrosion resistance and fully hardened for maximum service and performance.
High-quality imported transmission sprockets provide a
lower-cost alternative to our American-made Premium®
transmission sprockets. Plated for corrosion resistance
and fully hardened for maximum service.
For Big Twins from 1936 thru 1979 . . . . . . . . .$20.79
26418 22 tooth (repl. OEM 35203-36)
12226 23 tooth (repl. OEM 35212-73)
12227 24 tooth
12228 25 tooth
12229 26 tooth
Belt to Offset Sprocket
Conversion Kit for
5-Speed Big Twins
1936-1979
4-SPEED
For Big Twins with 4-Speed Transmissions
from 1980 thru 1985 . . . . . . . . . . . . . . . . . . . . . . . .$19.99
12220 22 tooth (repl. OEM 33338-83)
12221 23 tooth (repl. OEM 33337-83)
12223 24 tooth
12224 25 tooth
For Sportster® and K Models 1954-1979 . . .$25.99
080119 19 tooth (repl. OEM 35197-52)
12230 21 tooth (repl. OEM 35205-52A)
12231 22 tooth
18334 23 tooth
18335 24 tooth
For Sportster® Models from 1979-1984 . . . . .$25.99
18340 21 tooth (repl. OEM 35205-79A)
18341 22 tooth
18342 23 tooth
18345 21 tooth (repl. OEM 35208-84)
18346 22 tooth
18347 23 tooth
For 5-Speed Evolution® Sportster® Models
from 1991 thru 1992 . . . . . . . . . . . . . . . . . . . . . . . .$38.99
18355 21 tooth (repl. OEM 37709-89)
18356 22 tooth
18357 23 tooth
080198
For Big Twins from 1936 thru 1979 . . . . . . . . .$14.89
18360 22 tooth (repl. OEM 35203-36)
18361 23 tooth (repl. OEM 35212-73)
18362 24 tooth
18363 25 tooth
18364 26 tooth
from 1980 thru 1985 . . . . . . . . . . . . . . . . . . . . . . . .$15.49
18365 22 tooth (repl. OEM 33338-83)
18366 23 tooth (repl. OEM 33337-83)
18367 24 tooth
18368 25 tooth
from 1980 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . .$15.49
18369 22 tooth (repl. OEM 33336-83)
18370 23 tooth
18371 24 tooth
For Sportster® and K Models 1954-1979 . . .$16.99
18382 20 tooth
18378 21 tooth (repl. OEM 35205-52A)
18379 22 tooth
18380 23 tooth
18381 24 tooth
18372 21 tooth (repl. OEM 35205-79A)
18373 22 tooth
18374 24 tooth
18375 21 tooth (repl. OEM 35208-84T)
18376 22 tooth
18377 23 tooth
Offset Pulleys for V-Rod® Models
by Rick’s
Offset pulleys with 30 or 28 teeth for V-Rod® models.
Available in different offsets from 8mm up to 55mm.
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
Transmission Pulleys
for Big Twins
Stock style replacement pulleys
available with 30, 32 (stock) or
34 teeth. Steel construction.
For 5-Speed Big Twins
from 1985 thru 1993
080194 30 tooth . . . . . . . . . . .$48.49
080195 32 tooth (replaces
OEM 40210-85B) . . .$52.99
080196 34 tooth . . . . . . . . . . .$48.49
For 5-Speed Big Twins
080198 32 tooth (replaces
OEM 40250-94) . . . .$60.49
12.26
Offset Pulleys with 30-Teeth for Models
from 2002 thru 2003 . . . . . . . . . . . . . . . . .Call for price
687028 8mm offset
687030 28mm offset
687032 33mm offset
687034 38mm offset
687036 42mm offset
687038 55mm offset
Offset Pulleys with 30-Teeth for Models from
2004 to Present
687027 8mm offset
687029 28mm offset
687031 33mm offset
687033 38mm offset
687035 42mm offset
687037 55mm offset
Offset Pulleys with 28-Teeth for Models from
2004 to Present
687039 8mm offset
687040 33mm offset
687041 42mm offset
687042 55mm offset
Transmission Pulleys
Gear Ratio Chart for Final Drive Pulleys
Transmission Pulley
Stock 5-speed Big Twins come with 32-tooth pulleys. Smaller 29, 30, and 31-tooth pulleys provide stronger acceleration, while larger 33 and 34-tooth pulleys reduce
engine speed for smoother cruising. For example, a 34-tooth pulley will reduce
engine speed by about 240 RPM at 60 mph.
Rear Wheel Pulley
Smaller pulleys will reduce the engine speed for smoother cruising. Larger pulleys
will raise the engine speed for stronger acceleration. 1993 Softail® models came with
61-tooth rear wheel pulleys. 1994 Softail® models came with 70-tooth rear wheel
pulleys. 1995 thru 1999 Softail® models came with 65-tooth rear wheel pulleys, and
Twin Cam 88® Softail® models have 70-tooth pulleys. All other Big Twins equipped
with rear belt drive units since 1980, have 70-tooth rear pulleys.
Primary Drive Ratios
A primary ratio of 1.54 (24/37 tooth combination) was stock on all Big Twin models
from 1985 thru 1993. A primary ratio of 1.44 (25/36 tooth combination) is stock on all
Big Twin models from 1994 to present.
Transmission
Rear Wheel
Secondary
Overall Ratio
Overall Ratio
Pulley
Pulley
Ratio
(1.54 Primary) (1.44 Primary)
29
70
2.41
3.72
3.48
30
70
2.33
3.60
3.36
31
70
2.26
3.48
3.25
32
70
2.19
3.37
3.15
33
70
2.12
3.27
3.06
34
70
2.06
3.17
3.00
29
68
2.35
3.61
3.38
30
68
2.27
3.49
3.26
31
68
2.19
3.38
3.16
32
68
2.13
3.27
3.06
33
68
2.06
3.17
2.97
34
68
2.00
3.08
2.88
29
65
2.24
3.45
3.23
30
65
2.17
3.34
3.12
31
65
2.10
3.23
3.02
32
65
2.03
3.13
2.92
33
65
1.97
3.03
2.84
34
65
1.91
2.94
2.75
29
61
2.10
3.24
3.02
30
61
2.03
3.13
2.92
31
61
1.97
3.03
2.83
32
61
1.91
2.94
2.75
33
61
1.85
2.85
2.66
34
61
1.79
2.76
2.58
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Bearing Support Plates
for V-Rod® Models by Rick’s
Bearing support plate for the transmission drive pulley on
V-Rod® models. Available with 42mm or 55mm offsets. Not
required for wheel conversions up to 240mm, but bigger
wheels like 280mm or 300mm should use one of these
bearing support plates. Sold each. . . . . . . . . . . . . . .Call for price
687090 33mm offset
687043 38/42mm offset
687044 55mm offset
RevTech®
Pulley Kit
Hand
Controls
Lighting
Electrical
Includes 32-tooth front
pulley, mounting screws,
lock plate, sprocket nut,
pulley spacer and mainshaft oil seal. . . . . . . .$99.99
58596 Fits 5-speed Big
Twins from 1985
to present
Exhaust
Intake
Andrews Final Drive
Pulleys
Engine
Change your final drive ratio with
Andrews’ transmission pulleys.
Precision-machined from heattreated gear-quality steel. Fit
Gaskets
5-speed Big Twins from 1985
to present. . . . . . . . . . . . . . . . . .$171.99
1985-1993 1994-up
24200
24510
24201
24321
24322
24323
29-tooth pulley
30-tooth pulley
34-tooth pulley
Tranny
& Clutch
Aluminum Transmission Drive Pulleys by Belt Drives Limited
Driveline
All new lightweight 7075 super strong aluminum transmission pulleys weigh about 1/3 as
much as stock pulleys for extended 5th gear bearing life (4-speed pulleys are constructed
of 356 aluminum). And lighter weight means more horsepower to the rear wheel. The
center insert is gear-cut and cast in, while the pulleys are hard anodized for long life. A
wide selection of sizes permits fine tuning of final drive ratio. Includes a new spacer,
shaft nut, seal and retaining plate with screws. Made in the USA. . . . . . . . . . . . . . . .$131.99
For Big Twin Models from 1985
to Present
42571 29-tooth
42572 30-tooth
42573 31-tooth
42574 32-tooth
42575 33-tooth
42576 34-tooth
Fit Sportster® and Buell® Models
42740 28-tooth
42741 29-tooth
42742 30-tooth
For 4-Speed Big Twin Models
from 1980 thru 1984
42743 29-tooth
42744 30-tooth
42745 31-tooth
42746 32-tooth
42747 33-tooth
Wheels,
Tires
& Brakes
Frames
JIMS® “Mega” Transmission Pulley Nut
for 5-Speed Models
The “Mega” nut features a built in lock plate that stays tight
even in high-performance application. Fits all 5-speed models
from 1993 to present.
060650 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.99
Transmission Final Drive Pulley Spacer
Forks
& Shocks
Sheetmetal
General
Fits Big Twin models from 1985 thru 1993 (not shown).
56250 Replaces OEM 33334-85 (sold each) . . . . . . . . . . . . .$11.74
12.27
Cross
Reference
Derby & Inspection Covers
‘Inferno®’ Primary Covers
Flamed design matches our wide variety of
Inferno accessories including point cover, air
cleaner insert, tranny end cover, rocker box covers and many more. Unique hidden mounting
system looks nearly invisible. Cast metal with
top-quality chrome and black painted flame
background.
27632 Derby cover for Big Twin models
from 1970 thru 1998 . . . . . . . . . . .$49.59
27612 Derby cover for Big Twin models
from 1999 to present . . . . . . . . . .$49.09
27634 Inspection cover for 4-speed FL
and FX models with floorboards
or forward controls from 1965
thru 1986, as well as Softail® and
Dyna Wide Glide® models from
1984 to present . . . . . . . . . . . . . . .$34.89
Driveline
Inspection Cover
Chrome Screw Kit
This custom countersunk screw kit permits you
to fit all Original Equipment and aftermarket
inspection covers with countersunk holes to
models with forward controls from 1989 thru
1997. You use the four short screws on models
from 1989 thru 1993, and two long and two
short screws on models
from 1994 thru 1997. . . . . . . . . . . . . . . . . . . .$18.49
58686 Complete kit
‘Inferno ’ Derby Cover for Late Sportster Models
®
®
Chrome-plated, die-cast construction with black-painted background.
Matching easy-to-install gas caps, air cleaner cover and other parts are
available. Includes O-ring and mounting hardware. . . . . . . . . . . . . .$42.99
27952 Fits Sportster® models from 1994 to present
Pro-One™ ‘Millennium’ Covers
12
65451
Chrome billet engine covers feature rounded edges. Available in
smooth or ball milled styles.
65349
Derby Covers
Fit all Big Twins from 1970 thru 1998. . . . . . . . . . . . . . . . . . . . . . . . . . .$68.95
65348 Smooth
65349 Ball milled
Fit all Big Twins from 1999 to present. . . . . . . . . . . . . . . . . . . . . . . . . . $68.95
65451 Smooth
65452 Ball milled
Inspection Covers
Fit 4-speed FX/FL models with forward controls from 1965 thru
1986, and Softail® or Dyna Wide Glide® models
from 1984 to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.95
65350 Smooth
65351 Ball milled
Point Covers
Fit all models from 1970 to present (except Twin Cam 88®
models) not shown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99
65346 Smooth
65347 Ball milled (horizontal mounting holes)
Fit all Twin Cam 88® models from 1999 to present. . . . . . . . . . . . . . .$34.99
65453 Smooth
65454 Ball milled
12.28
65454
65351
Apparel
Bike Kits
& Trailers
05056
37725
Seats
& Bags
Foot
Controls
37860
37861
Hand
Controls
37862
05057
Lighting
Skull Engine and Primary Covers
Ominous 3-dimensional skulls design. Gives a tuff look that’s sure to draw
attention in any crowd. Made from polished aluminum, each piece is sandcast from a hand-carved original.
Point Covers
37728 Fits Twin Cam 88® models from 1999 to present . . . . . . . . . . . .$37.19
37862 Fits all models from 1970 to present
(except Twin Cam 88® models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.19
Electrical
Derby
37726
37860
37727
Exhaust
Covers
Fits all Big Twin models from 1999 to present . . . . . . . . . . . . . .$89.49
Fits all Big Twin models from 1970 thru 1998 . . . . . . . . . . . . . . .$84.59
Fit all Sportster® models from 1994 thru 2003 . . . . . . . . . . . . . .$89.49
Ness-Tech® Flamed Engine Covers
Machined from billet aluminum with a beautiful coating of chrome.
05056 Derby cover for all Big Twin models from 1970 thru 1998 . . . . .$69.99
05057 Inspection cover for 4-speed FL/FX models with forward controls
from 1965 thru 1986,and Softail® or Dyna Wide Glide® models
from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.99
05059 Point cover for all models with horizontal mounting holes
from 1970 to present (except Twin Cam 88® models) . . . . . . . . .$39.99
Inspection Cover
37861 Fits 4-speed FL and FX models with floorboards or forward
controls from 1965 thru 1986, as well as Softail® and
Dyna Wide Glide® models from 1984 to present . . . . . . . . . . . .$49.79
Skull Rocker Box Cover Sets
37725 Fits all Evolution® Big Twin models from 1984 thru 1999 . . .$134.69
Intake
Engine
Gaskets
Skull Covers by Skull Enterprises
Polished cast aluminum from hand carved mold. Available with a big skull
surrounded by smaller skulls, or with all small skulls. Fit Big Twin models
from 1970 thru 1998 (except Twin Cam 88® models).
37733 Derby cover with big and small skulls . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.59
37730 Derby cover with small skulls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.59
37729 Point cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.99
12008 Derby cover gasket (replaces OEM 25416-70) pack of 10 . . . . . . . . .$24.99
37733
37730
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
37729
Frames
Multiple Skull Inspection Cover by Skull Enterprises
Forks
& Shocks
Polished cast aluminum from hand-carved mold. Fits 4-speed FL and FX models
with floorboards or forward controls from 1965 thru 1986, as well as Softail® and
Dyna Wide Glide® models from 1984 to present. . . . . . . . . . . . . . . . . . . . . . .$47.99
33154 Sold each
Sheetmetal
General
12.29
Cross
Reference
340822
Collection
340818
Collection
Collection Covers by Pan-Galactic Sculpture
Say something about yourself with these specialty inspection covers by Pan Galactic. Made from precision molded cast aluminum, they have crisp, clean lines
and intricate detail. The rugged black powder coat has a smooth, gloss finish in sharp contrast to the highly polished aluminum. Available either as a complete set, or individual pieces.
POW/MIA Collection
Enough said. 10% of the proceeds from the sale of these covers are donated to Vietnam Veterans groups.
340818 POW/MIA Collection. Set of all three (points, 3-hole derby, inspection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$177.99
340817 POW/MIA points cover. Fits Big Twins models from 1970 thru 1999 except Twin Cam 88® models (with two-hole cover) . . . . . . . . . . . . . . . . . . .$51.99
340816 POW/MIA derby cover. Fits Big Twins models from 1970 thru 1999 (with three-hole cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$91.99
340823 POW/MIA 5-hole derby cover. Fits Big Twins models from 1999 to present (with five-hole cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99
340815 POW/MIA inspection cover. Fits Softail® and Dyna Wide Glide® models from 1984 thru 1999
and 4-speed Big Twins from 1965 thru 1984 with forward controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.99
Driveline
Grateful Dead Collection Black powered coated “Steal Your Face”:
The Great American Bike meets the Great American Band. A semi-religious American icon. Officially licensed product.
340822 Grateful Dead Collection. Set of all three (points, 3-hole derby, inspection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99
340819 Grateful Dead points cover. Fits Big Twins models from 1970 thru 1999 except Twin Cam 88® (with two-hole cover) . . . . . . . . . . . . . . . . . . . . . .$45.99
340820 Grateful Dead 3-hole derby cover. Fits Big Twins models from 1970 thru 1999 (with three-hole cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.99
340824 Grateful Dead 5-hole derby cover. Fits Big Twins from models from 1999 to present (with five-hole cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.99
340821 Grateful Dead inspection cover. Fits Softail® and Dyna Wide Glide® models from 1984 thru 1999
and 4-speed Big Twins models from 1965 thru 1984 with forward controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48.99
18920
19005
37262
12
37268
‘Live To Ride’ Derby and Inspection Covers
Classic design with either ‘A Way of Life’ banner or ‘Eagle Spirit’ banner.
Derby Covers
Fits all Big Twin models from 1970 thru 1998.
19005
‘A Way of Life’ in Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99
18920
‘Eagle Spirit’ in Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.49
12.30
‘Teardrop and Allen’
Primary Covers
Exclusive Custom Chrome® design matches the complete line of
‘Teardrop and Allen’ accessories. Perfectly chrome-plated, they feature stainless steel buttonhead rivets and teardrop indentations.
Includes hardware.
37262 Inspection cover for 4-speed FL and FX models with
forward controls from 1965 thru 1986, and Softail® or
Dyna Wide Glide® models from 1984 to present . . . . . .$32.99
37268 Inspection cover for FXR models
from 1985 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99
Apparel
Bike Kits
& Trailers
‘K-Oval’
Seats
& Bags
Wings
Spike
T-3
Foot
Controls
‘Drop’
Scorpion
Stiletto
Grinder
Hand
Controls
Pulsar
Lighting
Electrical
Airfoil 3
3-Spoke Swept
Inferno
Meridian
‘Grooved’
RevTech® Chrome Billet Derby Covers
Match these 2-piece, chrome-plated billet aluminum derby covers with our RevTech
wheels, pulleys, rotors, point covers and more for complete style. Includes all mounting
hardware. Available for all Big Twin models from 1970 to present. . . . . . . . . . . . . . .$109.99
Fit all Big Twin Models with 3-Bolt
Fit all Big Twin Models with 5-Bolt
Covers from 1970 thru 1998
Covers from 1999 to Present
33454 Spike
33464 Scorpion
33455 Grinder
33465 Stiletto
33456 Wings
33467 Spike
33457 T-3
33468 Grinder
33459 Pulsar
33469 Wings
33460 Airfoil 3
33470 T-3
33462 Inferno
33471 3-Spoke Swept
33463 Meridian
33472 Pulsar
33473 Airfoil 3
33475 Inferno
33476 Meridian
®
Jesse James ‘Signature Series’ Derby Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.19
Please see page 8.35 for photographs of additional styles listed below
600104
600105
600107
600108
600109
Creep
Style 53
West Side
Doom
Penta
600111
600112
600114
600115
600116
Creep
Style 53
West Side
Doom
Penta
Paul Yaffe ‘Signature Series’ Derby Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.19
Please see page 8.35 for photographs of additional styles listed below
600103 The Wheel
600110 The Wheel
Exhaust
Intake
F. Kodlin Chrome Engine Covers
CNC-machined from aluminum and then chrome-plated for
the ultimate in appearance. Fit most Big Twin models from
1970 to Present.
Derby Covers for Big Twin Models with 3-Hole
Covers from 1970 thru 1998
85837 ‘K-Oval’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.49
85838 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.49
85839 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$190.39
85840 ‘Halebob’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$224.49
Derby Covers for Big Twin Models with 5-Hole
Covers from 1999 to Present
86552 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.49
86554 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.49
Inspection Covers for 1996-Up Softail®
and Dyna Wide Glide® Models
85841 ‘K-Oval’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$118.89
85842 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$117.79
85843 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$118.89
Point Covers for all Twin Cam 88® Models
86553 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.19
86555 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.19
Point Covers for all Models from 1970
to Present (except Twin Cam 88® Models)
85844 ‘K-Oval’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.19
85845 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.19
85846 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.09
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
12.31
Cross
Reference
Ball Milled Billet Engine Covers
by Pro-One™
Driveline
Donnie Smith Signature Series™ Dress-up Kit
Previously only available as separate components, the Donnie Smith line
of custom covers is now available as a complete dress-up kit. This matching
set of accessories includes the points, derby, inspection, and transmission
covers. Includes chrome mounting hardware.
340830 Dress-Up Kit for Softail® models from 1987 thru 1998 . . . . . . . .$174.99
340800 Derby cover for all Big Twins from 1970 thru 1999 . . . . . . . . . . . .$48.49
340801 Inspection cover for Softail® and Dyna Glide models from
1984 thru 1999 and 4-speed Big Twin models from 1970
thru 1986 with forward controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48.49
340802 Point cover for all Big Twins from 1970 to present
(except Twin Cam 88® models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99
340804 Transmission cover installs over stock cover and includes hardware.
Fits 5-speed big twins 1987 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . .$44.99
CNC-machined and chrome-plated. For all Big
Twin models from 1970 thru 1998.
65076 Derby cover . . . . . . . . . . . . . . . . . . . .$68.95
65075 Point cover (horizontal holes) . . . .$34.99
‘Mirage®’ Engine Covers
12
37250
Clean design and unique “hidden mounting bolts” mean virtually invisible
hardware when installed. Chrome-plated with decorative black painted
slots match the complete Mirage® line of accessories. Easy-to-install.
Complete with all hardware.
27146 Derby cover for all Big Twin models from 1970 thru 1998 . . . .$42.49
27613 Derby cover for all Big Twin models from 1999 to present . . . .$46.29
27155 Inspection cover for 4-speed FL and FX models with forward
controls from 1965 thru 1986 and Softail® or Dyna Wide Glide®
models from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.39
27147 Point cover for all Sportster® and Big Twin models from 1970
thru 2003 (except Twin Cam 88® models) . . . . . . . . . . . . . . . . . . . .$32.89
37255
‘Riveted’ Engine Covers
Get that high-tech ‘racers only’ look with our buttonhead ‘Riveted’ chrome
covers. Includes mounting hardware.
37250 Derby cover for all Big Twin models from 1970 thru 1998 . . . . .$34.99
37251 Point cover for all models from 1970 to present
(except Twin Cam 88® models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49
37255 Inspection cover for FXR models from 1985 thru 1994 . . . . . . . .$21.99
12.32
Chrome
Inspection Cover
Fits 4-speed Big Twins with forward controls from 1965-early
1984. . . . . . . . . . . . . . . . . . . . . . . .$9.99
15936 Replaces OEM 60572-78T
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Chrome Cover for Primary Inspection
Cover
Installs over the stock inspection cover using only the two
end screws. You don’t break the original seal – you don’t
create a leak! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
76008 Fits 4-speed FL and FX models with forward controls
from 1965 thru 1986, and Softail® or Dyna Wide Glide®
models from 1984 to present
Hand
Controls
‘Regency™’ Engine Covers
Chrome design matches wide variety of ‘Regency’ accessories. Features unique hidden
mounting system.
Lighting
Derby Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.99
22041 Fits all Big Twin models with 3-hole covers from 1970 thru 1998
Electrical
22044 Fits all Big Twin models with 5-hole covers from 1999 to present
Point Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99
22039 Fits all Twin Cam 88® models from 1999 to present (shown)
Exhaust
Intake
Engine
‘Flat’ and ‘Domed’ Derby Covers
Chromed heavy-gauge flat-steel or die-cast domed derby covers.
Fit all Big Twin models from 1970 thru 1998.
15148 Flat (repl. OEM 52573-77T) . . . . . . . . . . . . . . . . . . . . . .$17.99
25230 Domed (repl. OEMs 60668-84A, 25392-84T) . . . . . .$28.99
Chrome ‘Porthole’ Covers
Gaskets
Brilliantly-designed covers simulating port holes set
off an eye-catching custom look.
• Designed for inspection, point and derby covers
• Made of CNC billet aluminum and
polished chrome
• Easy installation in minutes
• Sold each
98366 Inspection cover for 4-speed FL and FX
models from 1965 thru 1986 with
forward controls and all Softail®
and Dyna Wide Glide® models
from 1984 to present . . . . . . . . . . . . . . .$33.89
98368 Derby cover for all Big Twin models
from 1970 thru 1998 . . . . . . . . . . . . . . . .$58.59
698370 Derby cover for all Big Twin models
from 1999 to present . . . . . . . . . . . . . . .$81.69
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
12267
Chrome Derby Cover
for Late Sportster® Models
Chrome Covers for ‘Tin’ Style
Outer Primary Covers
Dress up your 1994 thru 2003 with this
chrome 4-screw derby cover. . . . .$24.49
Enhance the look of your ‘tin’ style primary
with these heavy-gauge covers.
12266 Inspection cover . . . . . . . . . . . . . .$7.99
12267 Derby cover . . . . . . . . . . . . . . . . .$13.99
Sheetmetal
General
12266
Forks
& Shocks
12.33
Cross
Reference
RevTech® Rear Belt Pulleys
RevTech® Billet Rear Belt Pulleys
We machined the design into both sides of the pulley so they look great from any angle. Made in the USA to exacting standards, each piece is CNC-machined
from solid blocks of 6061 ‘T-6’ billet aluminum for maximum durability. Match them up with a set of great-looking RevTech® wheels to create a complete custom
look. Includes chrome-plated mounting hardware. Tooth count may be matched to stock sizes or custom configured with front pulleys to emphasize cruising
comfort or hard-charging acceleration. Available for most models from 1980 to present (except Touring models from 2000 to present).
Chrome pulleys from $401.99 to $529.99
‘Inferno’
‘Vandetta’
‘Meridian’
‘Scorpion’
‘RevPro’
Chrome RevTech® Pulley Chart
For 2000-up
Sportster® Models
61-Tooth
61-Tooth
65-Tooth
70-Tooth
70-Tooth
601245
48130
48132
48135
48137
601246
48131
48133
48136
48138
601247
47232
47298
47144
48139
601248
47231
47299
47142
48140
601249
48134
47458
47452
47462
Driveline
For 1991 thru 1999
Sportster® Models
Slicer & Dicer
For 1980 thru 1999 For 2000-up Big Twins
Big Twin Models
(except Touring models)
Slime Ball
Style
Vendetta
Inferno
Meridian
Scorpion
RevPro™
Spike II
Designer
RevTech
RevTech
RevTech
RevTech
RevTech
PAB
12
Creep
West Side
Doom
Jagged Edge
Roll Out
Jaw Dropper
Chrome RevTech® ‘Designer Series’ Pulley Chart
For 1991 thru 1999
Sportster® Models
For 2000-up
Sportster® Models
61-Tooth
61-Tooth
65-Tooth
70-Tooth
70-Tooth
48161
48181
48176
601210
601211
601212
601213
601214
601215
601216
48162
48182
48177
601217
601218
601219
601220
601221
601222
601223
48163
48183
48178
601224
601225
601226
601227
601228
601229
601230
48164
48184
48179
601231
601232
601233
601234
601235
601236
601237
48165
48185
48180
601238
601239
601240
601241
601242
601243
601244
12.34
For 1980 thru 1999 For 2000-up Big Twins
Big Twin Models
(except Touring models)
Style
Creep
Doom
West Side
Jagged Edge
Roll Out
Jaw Dropper
Slicer & Dicer
Slime Ball
Spike II
PAB
Designer
Jesse James / WCC
Jesse James / WCC
Jesse James / WCC
Paul Yaffe Originals
Eddie Trotta
Eddie Trotta
Big Bear Choppers
Big Bear Choppers
Rear Belt Pulleys
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Original Equipment Rear Belt Pulleys
RevTech ‘Mag Wheel’
Rear Pulleys
®
Put your bike on the fast-track with RevTech® rear pulleys. They’re CNC
machined to match the spokes on Original Equipment 9-spoke or 13-spoke
cast rear wheels. Made in the USA to exacting standards, each piece is CNCmachined from solid blocks of 6061 ‘T-6’ billet aluminum for maximum
durability. And for detail freaks, they have the design machined on both
sides rather than leaving the back plain. Fit most Big Twins from 1980 thru
1999, and include chrome-plated hardware. . . . . . . . . . . . . . . . . . . . . . . .$577.99
These are Original Equipment items. Available with black or silver finishes
for Big Twins from 1980 thru 1999.
75515 Black 70-tooth pulley (repl. OEM 40217-79A) . . . . . . . . . . . . . . . .$256.99 Lighting
75516 Silver 70-tooth pulley (repl. OEM 40211-85A) . . . . . . . . . . . . . . . .$299.99
75517 Black 65-tooth pulley (repl. OEM 40312-94) . . . . . . . . . . . . . . . . . .$256.99
75518 Silver 65-tooth pulley (repl. OEM 40311-94) . . . . . . . . . . . . . . . . . .$299.99
Electrical
Chrome 70-Tooth Pulleys
47159 13-spoke design
47166 9-spoke design
5-Spoke
Exhaust
New Style
High-Tech
Intake
Black 5-Spoke
Engine
Gaskets
Tranny
& Clutch
RST Pulleys
For 1980 thru 1999
Big Twin Models
1.5"-Wide
For 1980 thru 1999
Big Twin Models
1.125"-Wide
(custom applications)
For 2000-Up
Big Twin Models
1.125"-Wide
(except ‘Touring’ models)
Part #
Part #
Part #
Style
686170
686498
686172
686500
686171
686499
686173
686501
686174
686502
686175
686503
686176
686504
High Tech 61-tooth
Black High Tech 61-tooth
High Tech 65-tooth
High Tech 70-tooth
686177
686505
686179
686507
686178
686506
686180
686508
686181
686509
686182
686510
686183
686511
New Style 61-tooth
Black New Style 61-tooth
New Style 65-tooth
New Style 70-tooth
686184
686512
686186
686514
686185
686513
686187
686515
686188
686516
686189
686517
686190
5-Spoke 61-tooth
Black 5-Spoke 61-tooth
5-Spoke 65-tooth
Black 5-Spoke 65-tooth
5-Spoke 70-tooth
RST High Tech billet aluminum rear belt pulleys, CNC machined from solid billet block of
aluminum. Available highly polished or polished with black centers. The perfect match to
RST disc brake rotors and High Tech wheels.
Made in Germany to exacting standards.
Tooth count may be matched to stock sizes or
custom configured with front pulleys to
emphasize cruising comfort or hard-charging
acceleration. Available for most Big Twin models from 1980 to present (except FLT, FLHT and
Road King® models from 2000 to present).
Driveline
Wheels,
Tires
& Brakes
Frames
686518
Forks
& Shocks
Sheetmetal
General
Black 5-Spoke 70-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
12.35
Cross
Reference
BDL Rear Belt Pulleys
Rear Belt Pulleys
Polished or chrome billet aluminum pulleys with
hard-chromed and machined inner flanges. Use
stock mounting hardware, and fit most Big
Twins from 1980 to present.
Note: The 3-Spoke pulleys are not recommended for use on
high-performance Big Twins.
Chrome Pulleys for all Big Twin Models
from 1980 thru 1999
For use with 11/2"-wide rear drive belts.
65-tooth
70-tooth
47168
47171
47174
n/a
47179
080892
47187
47170
47173
47176
47178
47181
080792
47190
Swept . . . . . . . . . . .$389.99
3-Spoke . . . . . . . . . .$389.99
5-Spoke . . . . . . . . . .$389.99
9-Spoke . . . . . . . . . .$389.99
Solid . . . . . . . . . . . . .$389.99
5-Hole . . . . . . . . . . .$389.99
Mesh . . . . . . . . . . . .$389.99
Polished Pulleys for all Big Twin Models
from 1980 thru 1999
For use with 11/2"-wide rear drive belts.
65-tooth
70-tooth
47195
47197
Solid
Swept
3-Spoke
9-Spoke
5-Spoke
Solid . . . . . . . . . . . . .$296.99
Driveline
5-Hole
12
Mesh
‘Domed’ Rear Belt Pulleys
The ‘Domed’ design of these rear belt pulleys
makes them different from the rest! Unique
center cover hides all visible mounting hardware,
giving a cleaner and smooth appearance.
They’re made of billet aluminum and have
chrome finishes with hard-chromed, machined
inner flanges. They use the stock mounting
hardware, and fit most Big Twin models from
1980 to present.
California
Swept
California
Chrome Belt Pulleys for all Big Twin Models Dagger
from 1980 thru 1999
Designed for 11/2"-wide belts. . . . . . . . . . . . . .$464.99
65-tooth
70-tooth
44661
44669
44677
44685
44693
44697
44701
44705
44709
44663
44671
44679
44687
44695
44699
44703
44707
44711
California Swept
California Dagger
The Maze
Sunburst
3-Spoke
5-Spoke
Mesh
Plain
Swept
Note: 3-Spoke pulleys are not recommended for use on
high-performance Big Twins.
Sunburst
5-Spoke
Chrome Belt Pulleys for Big Twin Models
from 2000 to Present (except FLT, FLHT
and Road King® Models)
Designed for 11/8"-wide belts. . . . . . . . . . . . . .$464.99
65-tooth
70-tooth
44665
44673
44681
44689
44667
44675
44683
44691
12.36
California Swept
California Dagger
The Maze
Sunburst
The Maze
Rear Belt Pulleys
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Excalibur
Revolver
Hand
Controls
Thrasher
“Pro-Stock” Custom Rear Pulleys
Manufactured from aircraft grade aluminum, and precision machined on the latest CNC equipment
to provide maximum belt to pulley fitment. Available in 65- and 70-tooth versions.
Fit all Big Twin Models from 1980 thru 1999
080850 Revolver (70-tooth) . . . . . . . . . . . . .$369.99
080851 Excalibur (70-tooth) . . . . . . . . . . . . .$369.99
080950 Revolver (65-tooth) . . . . . . . . . . . . .$369.99
080951 Excalibur (65-tooth) . . . . . . . . . . . . .$369.99
Lighting
080852 Thrasher (70-tooth) . . . . . . . . . . . . .$439.99
080952 Thrasher (65-tooth) . . . . . . . . . . . . .$439.99
Electrical
Exhaust
Intake
Engine
08461
Gaskets
‘Inside/Out’ Brake Pulley
Kits by GMA
Tranny
& Clutch
Dramatically clean up the rear wheel
of your bike. Innovative design mounts
the 4-piston chrome caliper and rotor
internally. Features a polished CNC
billet 70-tooth pulley, ducted fan
spokes to cool the brake, and floating
ductile iron rotor. Kits are available for
the Original Equipment 11/2"-wide belts
or with a Pulley Adaptor Ring that converts
11/2"-wide belt pulleys to 11/8"-wide. Ideal
for wide tire applications where you need
more clearance between the tire and the belt.
Each kit includes stainless steel brake lines and
all necessary hardware. This direct bolt on kit
requires absolutely no welding or machining
(rigid frame applications require a weld on tab
which is included).
Fit Softail® Models from Late 1987
thru 1999
08453 Kit for 11/2"-wide belts . . . . . .$1,590.00
08454 Kit for 11/8"-wide belts
(includes adaptor ring) . . . . . . .$1,649.00
Fit Dyna Glide Models from 1991
thru 1999
Driveline
Spoked Rear Belt Pulleys
by Evolution Industries
Rear pulleys feature plain stainless steel spokes
to match perfectly with your rear spoked wheel.
The hub and rim are chromed billet aluminum.
Fit all Big Twin Models from 1980
thru 1999
18764 65-Tooth . . . . . . . . . . . . . . . . . . . . .$728.00
18765 70-Tooth . . . . . . . . . . . . . . . . . . . . .$728.00
Fit FXR Models from Late 1987 thru 1999
Fit Custom Belt Drive Rigid Models
with 3/4"-Diameter Rear Axles
Wheels,
Tires
& Brakes
Frames
Fit all Big Twin Models from 2000
to Present (except Touring Models)
Forks
Includes spacer for use with 1984-1999 style hubs. & Shocks
18766 65-Tooth . . . . . . . . . . . . . . . . . . . . .$728.00
18767 70-Tooth . . . . . . . . . . . . . . . . . . . . .$728.00
Sheetmetal
Replacement Parts
08461 Adaptor ring . . . . . . . . . . . . . . . . .$101.99
General
12.37
Cross
Reference
Rear Sprocket & Pulley Accessories
25425
25428
25290
Chrome Rear Pulley Covers
Premium-quality stamped steel covers fit most
stock pulleys used on most Big Twins from 1980
thru 1999, and Sportster® models from 1991 thru
2003. Includes chrome-plated Torx® hardware
and 3/8"-drive bit unless specified otherwise.
8-Hole Covers for 70-Tooth Pulleys
25290 Outer cover with hardware . . . . . .$42.49
25426 Outer cover ONLY
repl. OEM 91733-85 . . . . . . . . . . . . . .$25.99
25324 Inner cover with hardware . . . . . . .$45.99
25432
Chrome Steel Pulley Covers
for Twin Cam 88® Softail® Models
Fit Softail® models with 70-tooth rear pulleys
from 2000 to present. One version matches the
Original Equipment rear wheels fitted to all
Deuce™ models and may be installed on any
Softail® model if desired. Sold each. . . . . . .$37.99
25425 Fits Softail® models (except Deuce™
models) replaces OEM 91347-00
25432 Fits all Softail® models
(replaces OEM 91348-00)
Steel Rear Wheel Pulley
and Sprocket Spacer
Used on Big Twin models from 1980 thru 1985
to properly space the rear belt pulley to the
wheel. Also used to space the rear sprocket
on chain applications. Measures .200" thick.
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49
25420 Outer cover ONLY for 5-speed
Sportster® models from 1991
thru 2003 (repl. OEM 40279-91) . .$33.49
25421 Outer cover ONLY for Big Twin
(repl. OEM 40284-90) . . . . . . . . . . . .$31.99
Driveline
Solid Covers for 70-Tooth Pulleys
080254 Inner cover ONLY . . . . . . . . . . . . . . . .$36.99
Rear Wheel Sprocket and Pulley
Spacers
Assorted Hardware
25427 Kit with bolts, washers and tool . .$16.99
25423 Hardware only. Includes bolts
and washers ONLY . . . . . . . . . . . . . . .$13.99
Rear Wheel Sprocket and Pulley
Spacers
Chrome-plated spacers permit custom alignment
of rear wheel pulley or sprockets. Can be used
with many wide rear tire kits and frames. Do not
fit 2000-up wheel assemblies.
95153 13/8"-thick . . . . . . . . . . . . . . . . . . . . . . .$77.99
95154 11/8"-thick . . . . . . . . . . . . . . . . . . . . . . .$69.99
95158 7/8"-thick . . . . . . . . . . . . . . . . . . . . . . .$61.99
95159 11/16"-thick . . . . . . . . . . . . . . . . . . . . .$59.99
Billet aluminum spacers permit custom alignment of rear wheel pulleys or sprockets. Can be
used with many wide rear tire kits and frames.
Do not fit 2000-up wheel assemblies.
Chrome-Plated
18748 1"-thick . . . . . . . . . . . . . . . . . . . . . . . .$76.99
12
Natural Aluminum Finish
42691 .250"-thick . . . . . . . . . . . . . . . . . . . . . .$29.99
42692 .375"-thick . . . . . . . . . . . . . . . . . . . . . .$37.99
42693 .500"-thick . . . . . . . . . . . . . . . . . . . . . .$44.99
42694 .750"-thick . . . . . . . . . . . . . . . . . . . . . .$59.99
42695 .937"-thick . . . . . . . . . . . . . . . . . . . . . .$59.99
42696 1.100"-thick . . . . . . . . . . . . . . . . . . . . .$74.99
42697 1.250"-thick . . . . . . . . . . . . . . . . . . . . .$74.99
Wire-Laced Pulley Cover
Match the look of your traditional laced wheel
with this 20-spoke pulley cover for 70-tooth rear
belt pulleys. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.99
22605 Fits Big Twins from 1980 thru 1999
12.38
Rear Pulley Bolt Covers
Fits OEM hexhead pulley mounting bolts. Set of
5 dome-style chrome plastic covers. . . . . . . .$26.69
66015 Fit all models from 1980 to present
Rear Drive Belts
Apparel
Bike Kits
& Trailers
14mm
Seats
Replacement Rear Drive Belts
A wide selection of 14mm replacement final drive belts from
Gates and Dayco to fit most Original Equipment and aftermarket
belt drive units sold today. The application chart below may be
used to determine the stock replacement belt for your particular
application. The chart lists the model applications and years of
fitment along with the belt width and tooth count. If you have
installed oversized or undersized pulleys, it's a safe bet that we
have something that will fit your particular application.
14mm Gates HTD® ‘Poly Chain®’ Belts
All HTD® Poly Chain® belts have the distinctive exterior ribbing
and are manufactured in the USA by the Gates Rubber Company.
Poly Chain® belts are Kevlar® reinforced and feature rugged construction with aramid fibers surrounded by polyurethane.
14mm Dayco™ ‘Panther™’ Rubber Belts
Rides smoother and quieter than conventional belts because the
parabolic tooth profile eliminates trapped air between the belt
and pulley. Patented graphite, self-lubricating, double nylon cover with special stiflex fiber allows this
belt to hold up to maximum torque and extreme temperatures.
Drive Belt Application Chart
Domestic and international V-Rod® models with 72-tooth rear pulleys
from 2002 thru 2003
Domestic 5-speed Sportster® and Buell® models (except Firebolt™
and Blast™ models) with 61-tooth rear pulleys from 1991 thru 2003,
and the H-D® Accessory belt drive kit for 4-speed Sportster® models
International Sportster® models with 55-tooth rear pulleys
from 1991 thru 2003
International Buell® models (except Firebolt™ models)
with 55-tooth rear pulleys from 1994 thru 2002
Domestic and international 4-speed Big Twin models
with 70-tooth rear pulleys from 1980 thru 1986
Domestic Softail® models with 70-tooth rear pulleys from 1986 thru 1992
and 1994. Also fits international Softail® models from 1986 thru 1988
International Softail® models with 61-tooth rear pulleys
from 1989 thru 1993
Domestic Softail® models with 61-tooth rear pulleys 1993 ONLY
and international Softail® models with 65-tooth pulleys 1994 ONLY
Domestic and international Softail® models with 65-tooth rear pulleys
from 1995 thru 1999
Domestic and international Softail® models with 70-tooth rear pulleys
from 2000 to present
Domestic FXR models with 70-tooth rear pulleys from 1985 thru 2000
and international FXR models from 1985 thru 1988 and 1994 ONLY
International FXR models with 61-tooth rear pulleys
from 1989 thru 1993
Domestic Dyna Glide models with 70-tooth rear pulleys from 1991
thru 1999 and international Dyna Glide models from 1994 thru 1999
International Dyna Glide models with 61-tooth rear pulleys
from 1991 thru 1993
Domestic and international Dyna Glide models with 70-tooth
rear pulleys from 2000 to present
Domestic and international FLT, FLHT, FLHS and Road King® models
with 70-tooth rear pulleys from 1985 thru 1996 (except international
models from 1989 thru 1993)
International FLT, FLHT and FLHS models with 61-tooth rear pulleys
from 1989 thru 1993
Domestic and international FLT, FLHT and Road King® models
with 70-tooth rear pulleys from 1997 to present
14mm
42749
42730
42731
42732
44602
42748
43023
42778
43117
42780
42781
42782
42783
42784
42614
43043
42615
43021
42616
43045
43020
43049
43044
42879
Gates HTD Poly Chain Drive Belts & Bags
1"-wide, 126-teeth . . . . . . . . . . . . .$131.99
1"-wide, 130-teeth . . . . . . . . . . . . .$131.99
1"-wide, 132-teeth . . . . . . . . . . . . .$131.99 Foot
1"-wide, 133-teeth . . . . . . . . . . . . .$131.99 Controls
1"-wide, 135-teeth . . . . . . . . . . . . .$131.99
1"-wide, 136-teeth . . . . . . . . . . . . .$131.99
11/8"-wide, 125-teeth . . . . . . . . . . .$183.99 Hand
11/8"-wide, 126-teeth . . . . . . . . . . .$183.99 Controls
11/8"-wide, 128-teeth . . . . . . . . . . .$183.99
11/8"-wide, 130-teeth . . . . . . . . . . .$183.99
11/8"-wide, 132-teeth . . . . . . . . . . .$183.99 Lighting
11/8"-wide, 133-teeth . . . . . . . . . . .$183.99
11/8"-wide, 135-teeth . . . . . . . . . . .$183.99
11/8"-wide, 136-teeth . . . . . . . . . . .$183.99
11/2"-wide, 125-teeth . . . . . . . . . . .$191.29 Electrical
11/2"-wide, 126-teeth . . . . . . . . . . .$191.29
11/2"-wide, 127-teeth . . . . . . . . . . .$191.29
11/2"-wide, 128-teeth . . . . . . . . . . .$191.29
11/2"-wide, 130-teeth . . . . . . . . . . .$191.29 Exhaust
11/2"-wide, 132-teeth . . . . . . . . . . .$191.29
11/2"-wide, 133-teeth . . . . . . . . . . .$191.29
11/2"-wide, 135-teeth . . . . . . . . . . .$191.29
Intake
11/2"-wide, 136-teeth . . . . . . . . . . .$191.29
11/2"-wide, 139-teeth . . . . . . . . . . .$199.99
®
®
13/8"-wide, 150-teeth
(repl. OEM 40027-01)
Engine
(repl. OEM 40022-91)
(repl. OEM 40038-91)
Gaskets
(repl. OEM 40022-91)
(repl. OEM 40003-79)
(repl. OEM 40023-86)
(repl. OEM 40010-89)
(repl. OEM 40012-90)
(repl. OEM 40017-94)
(repl. OEM 40307-00)
(repl. OEM 40001-85)
(repl. OEM 40023-86)
(repl. OEM 40015-90)
(repl. OEM 40012-90)
(repl. OEM 40015-00)
(repl. OEM 40001-85)
(repl. OEM 40023-86)
(repl. OEM 40024-97)
14mm
14mm Dayco™ ‘Panther™ Ultra Cord’
Drive Belts
42892 1"-wide, 126-teeth . . . . . . . . . . . . .$131.99
42894 1"-wide, 130-teeth . . . . . . . . . . . . .$131.99
42895 1"-wide, 132-teeth . . . . . . . . . . . . .$131.99
42896 1"-wide, 133-teeth . . . . . . . . . . . . .$131.99
42897 1"-wide, 136-teeth . . . . . . . . . . . . .$131.99
42751 11/8"-wide, 125-teeth . . . . . . . . . . .$165.99
42772 11/8"-wide, 126-teeth . . . . . . . . . . .$165.99
42753 11/8"-wide, 128-teeth . . . . . . . . . . .$165.99
42774 11/8"-wide, 130-teeth . . . . . . . . . . .$165.99
42775 11/8"-wide, 132-teeth . . . . . . . . . . .$165.99
44603 11/8"-wide, 133-teeth . . . . . . . . . . .$165.99
42776 11/8"-wide, 136-teeth . . . . . . . . . . .$165.99
42750 11/2"-wide, 125 tooth . . . . . . . . . . .$165.99
42126 11/2"-wide, 126-teeth . . . . . . . . . . .$165.99
42127 11/2"-wide, 127-teeth . . . . . . . . . . .$165.99
42752 11/2"-wide, 128-teeth . . . . . . . . . . .$165.99
42754 11/2"-wide, 130-teeth . . . . . . . . . . .$165.99
42132 11/2"-wide, 132-teeth . . . . . . . . . . .$165.99
42133 11/2"-wide, 133-teeth . . . . . . . . . . .$165.99
42135 11/2"-wide, 135-teeth . . . . . . . . . . .$165.99
42136 11/2"-wide, 136-teeth . . . . . . . . . . .$165.99
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
HTD® and Poly Chain® are registered trade- General
marks of the Gates Rubber Company.
Note: The belts offered for sale on this
page have no warranty whatsoever.
12.39
Cross
Reference
Rear Sprockets
‘Scorpion’ and ‘Stiletto’
Directional Sprockets
Sensational styling is matched with precision engineering
for a perfect complement to our hot-selling RevTech® wheels
and matching accessories like derby and point covers and turn
signal lens kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$80.99
‘Scorpion’
Stiletto
Scorpion
09791
09804
09792
09805
09793
09806
51 tooth for 4-speed Big Twin models
from 1973 thru 1985 and Sportster®
(repl. OEM 41470-78T)
48 tooth for all FXR models with chain
drive (except FXRT, FXRP) from 1982
thru 1985 (repl. OEM 40954-81)
48 tooth for all Sportster® models from
1986 thru 1992 (repl. OEM 41470-86T)
Driveline
‘Stiletto’
FXR
FX/XL
Rear Sprockets for Disc Brake Models
Top-quality rear sprockets in a variety of sizes. Available plain or chrome-plated
Fit 4-Speed Big Twins 1973 thru 1985, and Sportster® Models 1979 thru 1981
12
Custom Chrome® Rear Sprockets
The Custom Chrome® sprocket line continues a long tradition
of innovative style, quality and design that makes CC a leader
in custom parts and accessories for Harley-Davidson®. These
hardened steel sprockets have triple chrome plating and feature a directional cut-out design. Fits Big Twin models from
1973 thru 1985 (except FXR) and Sportster® models from 1979
thru 1981.
080282 47 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.99
080281 48 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.99
080280 49 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.99
09801 51 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$73.49
Fits FXR models (except FXRT, FXRP) with rear chain drive
1982 thru 1985
09802 48 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$73.49
Fits Sportster® models from 1986 thru 1992
09803 48 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$73.49
12.40
Plain
Chrome
25644 48 tooth . . . . . . . . . . . . . . . . . .$37.99
25639 49 tooth . . . . . . . . . . . . . . . . . .$37.99
15912 51 tooth (repl. OEMs 41470-73
and 41470-78T) . . . . . . . . . . .$37.99
84372
25692
25693
25694
47 tooth . . . . . . . . . . . . . . . . . .$43.99
48 tooth . . . . . . . . . . . . . . . . . .$49.99
49 tooth . . . . . . . . . . . . . . . . . .$52.99
51 tooth (repl. OEMs 41470-73
and 41470-78T) . . . . . . . . . . .$49.99
Chrome Sprockets for Sportster® Models from 1982 thru 1985
09783 47 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
25696 48 tooth (repl. OEM 41470-82T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
09784 49 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
Chrome Sprockets for Sportster® Models from 1986 thru 1992 (Flat)
85134 46-tooth, chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.99
09785 47 tooth (repl. OEM 41493-90T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
09786 48 tooth (repl. OEM 41470-86T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
09787 49 tooth (repl. OEM 41492-90T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
85138 51 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.99
Chrome Sprockets for FXR Models
Fits 1982 thru 1985 FXR models (except FXRT, FXRP) with chain rear drive.
25653 46 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
25654 47 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
25651 48 tooth (repl. OEM 40954-81) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
25652 51 tooth (repl. OEM 40954-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
Drive Chains & Rear Sprockets
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Chrome-Plated
Rear Sprockets
Features mirror chrome finish and
the rugged durability that Custom
Chrome® sprockets are known for.
Fit 4-speed Big Twins 1973 thru
1985 and Sportster® models 1979
thru 1981.
09794 51 tooth . . . . . . . . . .$52.99
09796 49 tooth . . . . . . . . . .$52.99
09795 48 tooth . . . . . . . . . .$49.99
Hand
Controls
C.C. Rider® Heavy-Duty and O-Ring Chains
C.C. Rider® Chains are designed,
tested and manufactured exclusively for Custom Chrome® specifically
for the power demands of HarleyDavidson® motorcycles, and the performance demands of the people
who ride them. Engineered to
exacting standards to guarantee
long life and smooth operation.
Aligned and seated pitches eliminate initial stretch and early wear.
Tight precision assembly withstands
high impacts and resists kinking.
Shaved plate holes eliminate tapering and hairline cracks, ensuring
even distribution of stress. Made
with case hardened pins, wide side
plates, and premium bushings.
C.C. Rider® O-Ring Chains
20,000 mile Limited Warranty
against defects in materials or
workmanship.
17405 530 x 102 . . . . . . . . . . .$94.99
17406 530 x 104 . . . . . . . . . . .$96.49
17407 530 x 106 . . . . . . . . . . .$97.99
17408 530 x 110 . . . . . . . . . . .$99.99
17409 530 x 112 . . . . . . . . . .$101.49
17410 530 x 120 . . . . . . . . . .$105.99
Master Link
17411 O-Ring clip-style master link
(sold each) . . . . . . . . . .$4.99
Note: Because O-Ring chains are wider than
standard drive chains, it is imperative that
chain clearance to engine and frame components are checked after installation.
C.C. Rider® Heavy-Duty Chains
One Year Warranty against defects
in materials or workmanship.
17490 530 x 102 . . . . . . . . . . .$33.99
17491 530 x 104 . . . . . . . . . . .$35.49
17492 530 x 106 . . . . . . . . . . .$36.99
17495 530 x 110 . . . . . . . . . . .$39.99
17496 530 x 112 . . . . . . . . . . .$41.49
17497 530 x 120 . . . . . . . . . . .$47.49
Master Links
Master links are sold each.
17498 Heavy-Duty clip-style
master link . . . . . . . . . .$3.49
17499 Heavy-Duty clip-style
half link . . . . . . . . . . . . .$4.99
20,000 Mile
Warranty!
Intake
Tranny
& Clutch
Fits 4-speed Big Twins from 1973
thru 1985 and Sportster® models
from 1979 thru 1981.
09772 51 tooth (repl.
OEM 41470-78) . . . .$49.99
09771 49 tooth . . . . . . . . . .$49.99
09770 48 tooth . . . . . . . . . .$49.99
Fits Sportster® models from
1986 thru 1992.
OEM 41470-86) . . . .$49.99
Exhaust
Gaskets
Match your 1984 to 1991 stock
brake rotors with these brilliant
chrome, oval cutout sprockets.
Features the rugged durability
that Custom Chrome® sprockets
are known for.
Fits Sportster® models from 1982
thru 1985.
OEM 41470-82) . . . .$49.99
Electrical
Engine
Chrome-Plated Rear
Sprockets with Cutouts
Fits FXR models (except FXRT and
FXRP) with rear chain drive from
1982 thru 1985.
09773 48 tooth . . . . . . . . . .$49.99
Lighting
Driveline
Wheels,
Tires
& Brakes
Frames
RevTech® Nickel-Plated O-Ring Chains
RevTech chains combine the high-strength and long wear of O-ring design with great looks. Side
plates are nickel-plated for a custom appearance and to prevent rust and corrosion. With top quality
rubber O-rings, case hardened pins, and premium bushings, these chains are backed by our 20,000
Mile Limited Warranty against defects in materials or workmanship.
59550 530 x 102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
59551 530 x 104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$101.49
59552 530 x 106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$102.99
59553 530 x 110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$107.49
59554 530 x 112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$108.99
59555 530 x 120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.99
59556 RevTech® nickel-plated O-ring master link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
®
Forks
& Shocks
Sheetmetal
General
Note: Because O-ring chains are slightly wider than standard drive chains, it is imperative that chain clearance to engine and
frame components is checked after installation.
12.41
Cross
Reference
Drive Chain & Accessories
530ZVX Series Ultra Heavy-Duty Sealed O-Ring Chains by EK Chain
Driveline
The best chain on the market today for V-Twins – available in colors! Great for customizing. Color choice
allows chain to blend-in or stand-out from your bike. Not just another pretty face, EK Ultra Heavy-Duty
Chain stands-up to the demands of street and strip use. Available in popular lengths, with either chrome or
colored side plates.
Features include:
• Four-point pin riveting
• 10,560 lb. tensile strength
• Anti-kink solid bushings
• Solid reinforced rollers
• Factory packed with high-performance lube
• Extra strong x-style o-rings for superior sealing
• Clip-style master link included
530 x 100 Chain Size . . . . .$118.99
081130 Gold
081140 Chrome
081150 Red
081160 Blue
081170 Yellow
530 x 106 Chain Size . . . . .$126.99
081133 Gold
081143 Chrome
081153 Red
081163 Blue
081173 Yellow
530 x 102 Chain Size . . . . .$121.99
081131 Gold
081141 Chrome
081151 Red
081161 Blue
081171 Yellow
530 x 110 Chain Size . . . . .$130.99
081134 Gold
081144 Chrome
081154 Red
081164 Blue
081174 Yellow
530 x 104 Chain Size . . . . .$124.99
081132 Gold
081142 Chrome
081152 Red
081162 Blue
081172 Yellow
530 x 120 Chain Size . . . . .$143.99
081135 Gold
081145 Chrome
081155 Red
081165 Blue
081175 Yellow
Heavy-Duty Chain Breaker
A heavy-duty tool with a heat-treated
pin and folding handle. Works on
chain sizes 420 thru 530.
20123 Chain breaker . . . . . . . . . .$28.49
20124 Replacement tip . . . . . . . . .$4.44
Diamond Chain Breaker
Compression screw uses a heat-treated steel tip to press out
chain pins. It’s recommended that pins be ground off flush to
avoid damaging the chain bushing. . . . . . . . . . . . . . . . . . . . .$59.94
33037 Replaces OEM 94480-89T
12
Rear Chain Tensioner
by LBV Engineering
080921
080920
080922
12.42
Keep the slack out of your chain drive Harley and
enjoy a better all around riding experience with this
well made, easy to install chain tensioner. . . . . .$93.99
• Long life Urethane roller
• Sealed anti-friction bearings
• Replaceable roller and bearings
• Promotes longer chain and sprocket life
• Reduces frequency of chain adjustments
• Reduce chain noise and vibration
• Reduces chain erosion of inner primary
in electric start models
• Promotes smoother shifting
080920 Fits 4-speed FL and FX models (except Softail®
models) with chain final drive
080921 Fits Softail® models with chain final drive
from 1984 thru 1985
080922 Fits Sportster® models with chain final drive
from 1957 thru 1990
Master Link
Installation Tool
Turns the chore of installing pressfit master link plates into an easy
job. Works equally well on both
standard and O-ring chains. .$19.99
20274 Sold each
Motor Factory® Drive Chain
Apparel
Motor Factory® Chain by Diamond
Motor Factory® premium quality drive chain is manufactured in the USA by Diamond Chain Company. Choose
from three different types, the workhorse Heavy Duty, the longer lasting XDL, or the top of the line XLO O-ring
which is available in three different finishes. All are made from the best raw materials and the most modern
manufacturing methods. All include master link.
Heavy Duty
A high quality chain produced through a superior manufacturing process. Excellent for most applications at an
economical price.
XDL Chain
Duralube® chain with special oil impregnation process for the pin bushing areas for extended life and better
lubrication than standard chain.
Size
Heavy Duty
XDL
530 x 100
33001
$50.39
530 x 102
33002
$50.44
601356
$69.99
530 x 104
33003
$50.39
601357
$70.99
530 x 106
33004
$51.94
601358
$71.99
530 x 110
33005
$51.94
601359
$73.99
530 x 112
33045
$53.69
601360
$74.99
530 x 120
33014
$56.89
601361
$78.99
Master link each
33006
$1.99
601362
$1.99
Master link 20 pk
33025
$24.99
Spares kit
33038
$13.49
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Exhaust
Intake
Engine
XLO Chain
The XLO series chain is a full 40% stronger than standard chain and features permanent
O-ring lubrication that seals in lubricant yet keeps out contaminants. These top of the
line chains provide extra load-carrying capability and have a service life that averages
four times that of a standard chain. Requires less maintenance than standard chains and
due to less stretching, fewer adjustments are required.
Size
XLO Black
530 x 102
081102
530 x 104
081104
530 x 106
081106
530 x 110
081110
530 x 112
081112
530 x 120
081120
Master link each 081119
Master link 10 pk 081121
Spares kit
080990
$112.79
$114.44
$115.99
$121.79
$110.99
$131.34
$4.99
XLO Chrome
601340 $129.99
601341 $131.99
601342 $133.99
601343 $137.99
601344 $139.99
601345 $149.99
601346
$5.99
XLO Gold
601348
601349
601350
601351
601352
601353
601354
Tranny
& Clutch
$129.99
$131.99
$133.99
$137.99
601347
$16.99
601355
$149.99
$5.99
Wheels,
Tires
& Brakes
$16.99
Spares Kits
Spares kits include two master links, one link, and one half link. See charts for
applications and part numbers.
080990
Driveline
$139.99
$47.94
$13.99
Gaskets
Frames
Forks
& Shocks
081119
Sheetmetal
General
12.43
Cross
Reference
Drive Chain Accessories
Rear Pulley and Sprocket Hardware Kits
36112
36114
Driveline
36113
12
Chrome-plated sockethead hardware kits.
36112 Screw and washer kit for the sprocket or pulley on
Sportster® and Big Twins with cast wheels . . . .$22.74
36113 Screw and nut kit for the sprocket on Sportster®
and Big Twin models with spoked wheels . . . .$19.49
36114 Screw and nut kit for the pulley on Big Twin models
with spoked wheels from 1980 to present . . .$19.49
72059 Custom hardware kit with flat sockethead screws,
countersunk washers and locknuts. Fits FL, FX and
Sportster® models with chain drive and spoked
wheels from 1973 thru 1990 . . . . . . . . . . . . . . . . .$28.99
72060 Custom hardware kit with flat sockethead screws
and countersunk washers. Fits FL, FX and Sportster®
models with belt or chain drive and cast wheels
from 1973 to present . . . . . . . . . . . . . . . . . . . . . . .$27.49
72061 Custom hardware kit with flat sockethead screws,
countersunk washers and locknuts. Fits FXWG and
FXRS models with belt drive and spoked wheels
from 1985 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . .$28.99
Rear Brake Drum Sprocket and Rivet Kits
Includes sprocket, rivets, and dowel pins.
Late Hydraulic Sprocket Kit
19350 Fits 1967 thru 1972 FL and FX
(replaces OEM 41470-67) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49
19322 Rivet and dowel set for CC #19350
(1.020" x .190" rivets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.79
Early (Cast) Hydraulic Sprocket Kit
19514 Fits 1962 thru 1966 FL and FLH models
(replaces OEM 41470-62) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49
19321 Rivet and dowel set for CC #19514
(.630 x .195 rivets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.70
Mechanical Sprocket for Big Twin, Sportster® Models
51-tooth sprocket with rivets and dowels. Fits 1930-early 1958 OHV Big
Twins and 1954 thru 1978 Sportster® and K models.
19349 Black. Sprocket kit (replaces OEM 41470-30) . . . . . . . . . . . . . . . . . .$61.94
19320 Rivet and dowel set for CC #19349 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.79
RevTech® Chain Lube
Blended for Custom Chrome® by PJ1®, using their world-famous Blue
Label® formula. RevTech® Chain Lube may be used on any type of reardrive chain, including O-ring chains, and won’t fly off. Thin fluid quickly
penetrates the chain links, converting to a tough film which completely
lubricates and protects all critical points of the chain. Most importantly,
RevTech® Chain Lube keeps O-rings pliant and flexible, preventing drying
out and cracking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.83 each
35097 8 ounces (case of 6 cans)
Note: Due to DOT regulations, RevTech® Chain Lube cannot be shipped by air freight.
12.44
Chain & Belt Guards
12309
Apparel
12554
Bike Kits
& Trailers
19386
Seats
& Bags
12307
12315
12308
Chain Guards
for Hardtails
and Rigid Frames
12306
12311
12317
Foot
Controls
With mounting tabs for quick bolt-up adaptation to most hardtails and custom rigid frames.
12554 Fits hardtail Big Twins . . . . . . . . . .$41.99
19386 Fits rigid framed Big Twins . . . . . .$32.94
Hand
Controls
12318
28231
Lighting
Chrome Chain Guards for Swingarm Models
Stock replacement and custom chain guards are precisely engineered to
bolt-on in minutes.
For FL and FX Models
12306 Custom chain guard for swingarm 4-speed Big Twins
(except Softail® models) from 1973 thru 1985 . . . . . . . . . . . . . . . . .$37.99
12309 Stock replacement for 4-speed FX models (except Softail®
models) from 1973 thru 1985 (repl. OEM 60302-73T) . . . . . . . . . .$42.49
12317 Stock replacement chain guard for Softail® models
from 1984 thru 1985 (repl. OEM 60639-84) . . . . . . . . . . . . . . . . . . . .$55.99
For Sportster® Models
12307 Custom chain guard for 1967 thru 1978 XLH,
and 1970 thru 1978 XLCH models . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.99
12308 Custom chain guard for 1979 thru 1981 Sportster® models . . . . .$55.09
12311 Stock replacement chain guard for 1983 thru 1987
Sportster® models except 1987 Hugger® models
(replaces OEMs 60375-83, 91777-85) . . . . . . . . . . . . . . . . . . . . . . . . . .$51.49
Sportster® models and 1987 Hugger® models
(replaces OEMs 60365-87, 60405-87) . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99
Electrical
12310
Exhaust
Chrome ‘Full Dress’ Chain Guards
Chrome reproductions of classic ‘Dresser’ rear chain guards for 4-speed FL
models from 1963 thru 1984. Bolts directly onto 4-speed, chain drive models (except Softail® models) 1971 thru 1985. Accurate to the original with
heavy-gauge construction, fully rolled edges, inspection cover relief and
Intake
front mount bushing.
12310 Standard chain guard (repl. OEM 60302-63T) . . . . . . . . . . . . . . . . . .$55.99
28231 Louvered chain guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.89
25548 Replacement mounting grommet
(repl. OEM 11411) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99 Engine
For FXR Models
FXR models (except FXRT) and 1986 FXR Super Glide® models
(replaces OEMs 60640-86, 60607-81A) . . . . . . . . . . . . . . . . . . . . . . . .$52.99
Gaskets
Tranny
& Clutch
12639
28239
Driveline
Wheels,
Tires
& Brakes
28238
Louvered Chrome Chain Guards
for Swingarm Models
The same high-quality chain guards we sell as Original Equipment replacements, but with the added styling feature of louvers in the upper surface.
28238 Fits 4-speed FX models (except Softail® models)
from 1973 thru 1985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.84
28239 Fits 1988 thru 1990 Sportster® models
and 1987 Hugger® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.99
Chrome Ball Milled
Aluminum Belt Guard
Ball milled detail on the top surface adds visual
interest to our lightweight chrome-plated
aluminum belt guard. . . . . . . . . . . . . .$55.99
47208 Fits all Softail® models
with 70-tooth rear pulleys
from 1986 thru 1999
Frames
Forks
& Shocks
28242
Chrome Belt Guards for 5-Speed Sportster® Models
Sheetmetal
Made of heavy-gauge stamped steel, these guards keep your belt clean and
your bike looking good. Fits all 5-speed Sportster® models from
1991 thru 2003.
12639 Upper guard 1991 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.19 General
28242 Lower guard 1991 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99
12.45
Cross
Reference
Belt Guards
12314
12305
‘Shorty’ Belt Guard for Softail® Models
12303
Show off more of your pulley and wheel with this chrome-plated steel
upper belt guard. Complete with chrome hardware and a special T-nut that
permits use with various pulley sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.49
12695 Fits all Softail® models from 1986 thru 1999
12312
12313
Chrome Upper and Lower Belt Guards
All Custom Chrome® belt guards are made of heavily chrome-plated steel,
and are designed for simple, bolt-on installation.
‘Shorty’ Steel Belt
Guards by Landmark
Driveline
Heavy-gauge steel guards are
small enough to prevent stuff
from getting in the rear pulley, yet
accent custom pulleys. Made in the
USA to fit Softail® models with 70tooth pulleys from 1984 thru 1999.
14110 Polished stainless steel . .$31.99
14091 Chrome steel . . . . . . . .$65.49
Polished Stainless Steel
Upper Belt Guards
by ZCB
Show off more of your pulley with
these polished stainless steel upper
belt guard. They fit all Evolution®
and Twin Cam 88® Softail®
models. . . . . . . . . . . . . . . . . . . . .$134.79
86670 Fits models with 65 tooth
rear pulleys
86671 Fits models with 70 tooth
rear pulleys
For FXR and FLT/FLHT Models
12314 Upper belt guard for FXR models from 1985 thru 1986, and 1987
thru 1992 FXRTs (repl. OEMs 60299-85, 91774-85) . . . . . . . . . . . . .$55.99
12304 Upper belt guard for FXR models (except FXRT) from 1987
thru 1994 (repl. OEMs 60297-87, 91739-87) . . . . . . . . . . . . . . . . . . .$61.49
12312 Lower belt guard for FXR and Touring models from 1985
thru 2001 (repl. OEM 60397-85) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99
For FL and FX Models
12313 Upper belt guard for 4-speed models from 1980 thru 1986
(repl. OEMs 60388-82, 60380-79) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.99
12303 Upper belt guard for Softail® models from 1986 thru 1992
(repl. OEM 60533-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.84
12305 Lower belt guard for Softail® models with 70-tooth pulleys
from 1986 thru 1994 (repl. OEMs 60366-89, 60362-86) . . . . . . . . .$51.49
63136 Lower belt guard for Softail® models with 65-tooth pulleys
from 1994 thru 1999 (repl. OEM 60389-97A) not shown . . . . . . .$45.94
080308
12
12667
080330
‘Ribbed’ Belt Guard for Softail® Models
Easy-to-install steel belt guard with a show-quality chrome-plated finish.
Includes hardware and a reinforcing tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99
12667 Fits belt drive Softail® models with stock 70-tooth pulleys
from 1986 thru 1992
Chrome Lower Belt Guards for Softail® Models
Chrome steel belt guards for Softail® models from 1986 thru 1999. Available
plain or with louvers.
Plain
080308 With “Belt Drive” logo for Softail® models from 1986 thru 1992
with 70 tooth rear pulleys (repl. OEMs 60362-86A, 60366-89) . .$37.99
080330 Fits International Softail® models from 1988 thru 1999 and US
models from 1993 thru 1999 with 61 tooth rear pulleys
(repl. OEM 60415-89B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.99
Louvered
080332 Fits Softail® models from 1995 thru 1999 with 65 tooth
rear pulleys (repl. OEM 60415-89B) . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
12.46

Driveline - Custom Bikes by Mike

Transcription

Similar documents

Crowd Control Signature Series

Kretschmar Premium Boneless Bavarian Ham For

FEB ZODIAC UPDATE_GBR.qxd

BDA-INSTALLATIONSEINH DR-05_06-ENG.cdr

Jul - The Flash

2015 ICCA - 5 Star Media

37000 - 166600 SF

online catalog

1998 BCP/Wheelabrator Pass Thru Shotblast M

Kretschmar Premium Boneless Bavarian Ham For $3.99 Per Lb