CarboFlex™ Single Handle Kitchen Faucet

I N S TA L L AT I O N MA N UA L
CarboFlex™ Single Handle
Kitchen Faucet
KPF-2830
www.kraususa.com I toll free: 1.800.775.0703 I © 2016 Kraus USA Inc.
Thank you for your purchase
We would like to take this opportunity to thank you for choosing Kraus.
We hope that you are completely satisfied with your purchase, and enjoy it for years
to come. If you have any questions, or require technical assistance, please contact
us at 800.775.0703 and one of our representatives will be happy to help.
For more information about Kraus products, please visit:
www.kraususa.com
In order to activate your warranty and get faster access to customer support, please
register your new Kraus product at:
www.kraususa.com/registration
Sincerely,
Kraus USA Customer Service
2
7/8”
(22mm)
19.7º
10 1/8”
(257mm)
Prior to Installation:
∅ 1 15/16”
(∅ 50mm)
•
∅ 1 3/4”
(∅ 45mm)
∅ 1 15/16”
(∅ 50mm)
•
8 5/16”
(21mm)
1 3/8”
(35mm)
Make sure you have all necessary parts by
checking the diagram and parts list. If
any part is missing or damaged, please contact Kraus Customer Service at 800775-0703 for a replacement.
Turn off the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone
•
Place a bucket under angle stops. Turn on to flush any debris prior to installing
new plumbing. Shut off angle stops
•
Pre-drilled hole size requirement: 1-3/8” (min) – 1-1/2” (max)
•
Max countertop thickness: 2”
1 1/4-18UNF-2A
9/16”-18UNEF
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
Tools you will need:
Adjustable Wrench
Phillips Screwdriver
Safety Goggles
Bucket
3
Diagram and Parts List
A. Faucet Body
B. Base O-Ring
C. Mounting Hardware
Assembly
C1. Faucet Extender
C2. Rubber O-Washer
A
C3. Metal O-Washer
C4. Mounting Nut
C5. Mounting Screws
D. Waterlines
D
B
C1
C2
C3
C4
C5
4
Faucet Dimensions
(7-3/8")
(187.45mm)
Ø1.38″
max1.2″
(10")
254mm
(20-5/8")
524mm
(4-1/4")
108mm
5
FAUCET BODY
5. HANDLE
7. LOCKING
NUT
Step 1
Remove mounting hardware
assembly (C)
FAUCET BODY
A
7. LOCKING
NUT
5. HANDLE
9. CARTRIDGE
6. CARTRIDGE
COVER
4. SET
SCREW
3.HANDLE
CAP
A
ALLEN
KEY
9. CARTRIDGE
6. CARTRIDGE
COVER
4. SET
SCREW
3.HANDLE
CAP
ALLEN
KEY
C
C
Step 2
A
A
Place faucet body (A) through
1-3/8” hole in countertop or sink
with base o-ring (B) attached
Installer Tip: Base o-ring (B) is
embedded at base of faucet
body
BB
C
6
C
Step 3
B
D
Hot
Attach mounting hardware
assembly (C) and secure
Cold
HANDLE
Step 4
D
C
Attach waterlines (D) to angle
stops and tighten until snug. Turn
on angle stops and check for leaks.
(DO NOT TURN FAUCET ON)
* Grid Washer
Installer tip: Make sure grid
washer is installed at end of
waterlines prior to installing
Step 5
Remove sprayhead. Turn faucet
on for one minute to remove any
debris
7
Replacement Part List - KPF-2830
2
1
16
9
8
10
11
12
7
6
Part Number
1. Sprayhead
KP1027
2. Flow Regulator
KP1028
3. Handle Cap
KP1029
4. Set Screw
KP1030
5. Handle
KP1031
6. Cartridge Cover
KP1032
7. Locking Nut
KP1033
8. Washer
KP1034
9. Cartridge
KP1035
10. Base O-Ring
KP1036
11. Faucet Extender
KP1037
12. Rubber O-Washer KP1007
5
4
3
13
15
Parts
14
13. Metal O-Washer
KP1008
14. Mounting Nut
KP1009
15. Mounting Screws
KP1010
16. Waterlines
KP1038
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
8
Maintenance
Remove Cartridge
FAUCET BODY
First, shut off water supply at angle
stops
1. Remove handle cap (3)
2. Loosen set screw (4) (DO NOT
REMOVE)
3. Remove handle (5), unscrew
cartridge cover (6) byAhand
4. Unscrew locking nut (7) with
adjustable wrench
5. Remove cartridge (9) and wash
with clean running water
6. Replace cartridge (if necessary)
5. HANDLE
7. LOCKING
NUT
9. CARTRIDGE
6. CARTRIDGE
COVER
4. SET
SCREW
3.HANDLE
CAP
ALLEN
KEY
C - Shooting
Trouble
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM
CAUSE
Water will not shut off
completely
Cartridge (9) may need to
be adjusted, cleaned, or
replaced
Remove handle cap (3).
Loosen set screw (4) with
allen key. Remove handle
(5). Unscrew cartridge
cover (6) by hand. Unscrew
locking nut (7) with an
adjustable wrench. Remove
cartridge (9). Check for
cracks
Sprayhead (1) may be
loose or washer may not
be seated correctly
Tighten sprayhead (1) by
hand until snug. Make sure
washer is seated correctly
A
Leaking between
sprayhead (1) and hose
Low flow
B
ACTION
Debris may be clogging
Turn off angle stops.
grid washers in waterlines C Detach waterlines (16)
from angle stops and
check grid washers
9
Certifications:
GREEN
LEAD FREE
IA
P
NSF/ANSI Standard 61 certified by IAPMO
NSF/ANSI Standard 372 certified by IAPMO
MO
Meets ASME A112.18.1M/A112.18.1
R&
T
1.8gpm 6.8L/min maximum
TM
Water Efficiency
HELP LINE
Our customer service hours are Monday – Friday, 9am – 8pm EST.
Be sure to visit our website at www.kraususa.com
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
[email protected]
If you are a plumbing contractor or trade professional please contact a Kraus Pro
Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
[email protected]
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
[email protected]
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
10
11
R E G I S T E R Y O U R P R O D U C T T O D AY
Receive Proof of Ownership
Access Customer Care & Installation Help
Get Exclusive Kraus Offers & Promotions
Scan to Register Online
or visit http://www.kraususa.com/registration
We’re always looking for ways to improve.
Please take a moment to share your experience.
Visit http://www.kraususa.com/review to let us know what you think
about your new Kraus product.
Contact Us to Learn More
1.800.775.0703 / www.kraususa.com / [email protected]
Like & Follow KrausUSA
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
www.kraususa.com