LeCroy LogicStudio USB Logic Analyzer

Transcription

LeCroy LogicStudio USB Logic Analyzer
LogicStudio™
USB Logic Analyzer
Faster, Smarter Debug
ADVANCED FEATURES, SIMPLE DEBUG
Key Features
• 100 MHz, 1 GS/s,
16 channels
• I2C, SPI, UART
protocol analysis
• History mode
• Timing cursors
• Oscilloscope
connectivity
• Waveform magnifier
• Powerful trigger
environment
• Communicate
with colleagues
Logic analyzers are known to be slow, complicated and
expensive but LogicStudio™ changes all this by delivering
a powerful feature set, high-performance hardware and
an intuitive point and click user-interface. With timing
cursors, history mode, I2C, SPI and UART decoding,
powerful triggering and simple navigation the PC is
transformed in to an all-in-one debug machine. The intuitive user-interface works with basic mouse operations. To pan the
waveforms simply click and drag, use the mouse wheel to zoom in or scan
the waveforms with the magnification toll to get a great view of the details.
With all the debug tools accessible from the main screen, debugging is
simple, efficient and just one mouse click away.
LogicStudio provides even more
functionality when a WaveJet™ 300A
oscilloscope is connected to the PC.
Analog waveforms from the oscilloscope
are displayed alongside the digital
and serial waveforms captured by
LogicStudio turning the PC in to a mixed
signal oscilloscope. This combination
of waveforms provides insight that a
traditional logic analyzer cannot.
2
Easy Channel Setup
Quickly configure the inputs,
Serial Data Protocol
Decode and Trigger
I2C,
SPI and UART
Digital, Serial, Analog
Connect a WaveJet 300A to the
signal type, name and the color
Decode
on the fly for all 16 channels from
serial data busses and view
and turn the PC into a Mixed Signal
the signals screen or change a
the appropriate clock and data
Oscilloscope displaying digital, serial
single line on the fly from the main
signals directly below the protocol
and analog signals simultaneously.
screen. Double-click a channel to
message. Isolate specific data
LogicStudio will display all digital,
create a unique name that applies
patterns or addresses by triggering
serial and analog signals on the PC
to your device.
directly on that data.
display and allow you to get a full
same PC as the LogicStudio 16
picture of your embedded system.
Waveform Magnifier
Powerful Triggering
Timing Cursors
Get a better view of the waveforms
For difficult problems a simple edge
Quickly measure the time between
by passing over them with the
or logic level trigger is not enough.
transitions on a single line, across
magnifier, scroll the mouse
LogicStudio advanced triggering
digital lines or from a digital line to
wheel to zoom in for an even
provides an environment for creating
an analog waveform. Snap the cursors
closer look. The magnifier shows
powerful combinations of edge,
directly to the waveform edge for
waveform details in a long capture
logic level, parallel bus and serial bus
precise measurements.
without having to change the
triggers to isolate difficult problems.
horizontal scale.
3
POINT, CLICK, DEBUG
9
6
LogicStudio is fast! Waveforms
update quickly and panning or
zooming is extremely responsive.
Download the software and
experience it yourself. The
software interface is modern
and intuitive creating a new
logic analyzer experience.
LogicStudio is intuitive and
easy to operate with friendly
left-click and right-click controls
plus all buttons are on the main
screen, no complicated menus
to navigate.
1
7
8
1. History
Did something interesting or surprising
just flash across the screen, stop the
trigger and flip through a history of the
previous 100 acquisitions.
2. Persistence
View variations in the signals over
time to find problems faster. Use with
History mode to see what happened
when and isolate the problem.
3. Interleaving for Higher
Performance
Use all 16 channels at 500 MS/s
or 8 channels at 1 GS/s for more
timing resolution.
4. Logic Thresholds
Choose from standard TTL and CMOS
levels or create a custom level from 0–7 V.
4
3
2
8
5
5. Trigger Modes
Oscilloscope trigger modes of
Auto, Normal and Single help ensure
what you need to see is always on
the display.
6. Save and Recall
Save screenshots to share with
others or save waveforms and
setups for recalling later.
7. Add/Remove/Hide
Waveforms
One click to add a new waveform,
one click to remove it, right-click
to hide it for later viewing.
8. Waveform Display
and Scaling
View waveforms stacked on top of
each other or overlay one waveform
on top of another. Change the vertical
scale by dragging the bottom edge.
9. Built-in Help and Support
Not sure how to use a certain tool,
4
mouse over for tool tips or access the
manual from the Help menu. Have a
question or suggestion? Click on Tell
LeCroy in the Help menu and send
an email directly to LeCroy with the
waveforms, screen capture and setup
file attached to the message.
5
DIGITAL, SERIAL, ANALOG IN ONE PLACE
In many situations looking at
only digital lines does not give
the whole picture and more tools
are necessary. The LogicStudio
software solves this problem
by supporting the LeCroy
WaveJet 300A oscilloscope
turning the PC into a mixed
signal solution. Once the WaveJet
is connected, digital, serial and
analog waveforms can be viewed
simultaneously in one place
saving a lot of time and enabling
faster debug.
The LogicStudio software controls both the LogicStudio 16
hardware and the WaveJet 300A oscilloscope from a single PC.
6
SPECIFICATIONS AND ORDERING INFORMATION
Specifications
LogicStudio 16
Input Channels
Sample Rate
Minimum Detectable Pulse Width
Memory
Trigger Types
Threshold Selections
User-defined Threshold Range
Maximum Survivable Input Voltage
Threshold Accuracy
Maximum Input Dynamic Range
Minimum Voltage Swing
Input Impedance
Channel-to-Channel Skew
Trigger Resolution
Host Port
Size
16
1 GS/s on 8 Ch, 500 MS/s on 16 Ch
3.75 ns
40 kpts on 8 Ch, 20 kpts on 16 Ch
Edge, pattern, pulse width, pattern width. I2C, SPI, UART
TTL, CMOS (1.8 V, 2.5 V, 3.3 V, 5 V), User defined
0–7 V
±40 VDC
±150 mV + 5% of threshold
40 Vp-p
500 mVp-p
150 kΩ parallel 12 pF
1 ns typical
500 MS/s
USB 2.0, bus-powered peripheral
3.2" x 4.9" x 1.1" (81.3 mm x 124.5 mm x 28.0 mm)
Ordering Information
Product Description
Product Code
16 Channel, 1 GS/s, 100 MHz USB Logic Analyzer
LogicStudio 16
Customer Service
LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience
difficulties, our digital oscilloscopes are fully warranted for three years and our probes are warranted for one year.
This warranty includes:
• No charge for return shipping • Long-term 7-year support • Upgrade to latest software at no charge
7
Ihre Ansprechpartner
Produktbereiche
Produkte
Ansprechpartner
HF- und
Mikrowellentechnik
Abschlüsse und Abschwächer, absorbierende Materialien, Antennen, AntennenNachführungen (Tracking), Begrenzer / Limiter, Detektoren, EMI-Filter, Fernspeiseweichen,
DC-Blocks, Filter oder Filterbänke, Frequenzkonverter für Satcom, Hohlleiter-/ Koaxialadapter, Isolatoren und Zirkulatoren, Koppler und Signalteiler / Power Divider, Matrix- und
Verteilanlagen, optische Geräte und Übertragungssysteme, Komponenten und Systeme,
Oszillatoren (Festfrequenz) und Synthesizer, Phasenschieber, Schalter und Relais,
Verstärker HF/Mikrowelle 50 Ω
Ulrich M. Frick, Ludwig Mair, Tülay Dilek,
Manuela Rister
Hotline 0906 70693-55, [email protected]
Messen · Prüfen · EMV
Digitalspeicher-Oszilloskope, Funktionsgeneratoren, Signalgeneratoren, Arbiträrgeneratoren, Frequenzzähler, Spektrumanalysatoren, Oberwellen- und Flickeranalysatoren, Logikanalysatoren, LCR-Messbrücken, Tisch-Multimeter, Messtechnik-Zubehör, Widerstandsdekaden, Milli-Mikro-Ohmmeter, Antennenmesstechnik, Pyramidenabsorber, breitbandige
und selektive Feldstärkemessgeräte, Leistungsmessgeräte
Andreas Warta, Daniel Treichel, Daniela Strauß
Hotline 0906 70693-52, [email protected]
Heizen · Kühlen ·
Lüften
Heizelemente bis +600 °C, Heizfolien bis +250 °C, LCD-Beheizung, Folienthermometer,
Keramikthermometer, Gleitlagerthermometer, Dünnfilmthermometer -50 bis +600 °C,
Präzisionsthermostate, Miniaturthermostate, Hochleistungskühlkörper, Thermal-CircuitBreaker, Temperaturregler, NTC-Thermistoren und NTC-Sonden, Peltierelemente,
Peltierkühlgeräte
AC/DC-Axiallüfter, Radiallüfter/DC, Mini-Lüfter, Prozessorkühler, Lüftereinschübe,
Lüftermodifikationen, Lüfterzubehör
Robert Jall, Karl Federle, Anja Trabert, Daniela Strauß
Hotline 0906 70693-54, [email protected]
Luftfahrtelektronik
Bordeigene Spurlauf-, Unwucht- und Vibrationsüberwachung, Prüfgeräte für Spurlauf,
Unwucht und Vibration, stabilisierte Wärmebild- und Video-Kamerasysteme, Hi-Rel-Lüfter,
KLIXON®-End- und Druckschalter, Ground-Power-Units (GPU) für Turbinenflugzeuge,
optische Mikrometer
Johann Kothmeir, Christian Beigl,
Bettina Briegel, Jasmin Schmuttermayer
Hotline 0906 70693-77, [email protected]
Stromversorgungen
Labornetzgeräte, Hochstromnetzteile Serien AR, HE, Netzsimulation AC/DC-Quelle,
elektronische Lasten
Andreas Warta, Daniel Treichel, Daniela Strauß
Hotline 0906 70693-52, [email protected]
Schaltnetzteile
DC/DC-Wandler
USV-Systeme
AC/DC-Schaltnetzteile, DC/DC-Wandler, unterbrechungsfreie Stromversorgungen,
Industrie- und PC-Stromversorgungen
Theo Stadlmayr, Ingrid Schmid, Sandra Henne
Hotline 0906 70693-66, [email protected]
Antriebstechnik
Schrittmotoren für industrielle Anwendungen
Robert Jall, Karl Federle, Anja Trabert, Daniela Strauß
Hotline 0906 70693-54, [email protected]
Logik-Bauelemente
Verzögerungsleitungen, Si-Serie, Hybrid-Verzögerungsleitungen, programmierbare,
aktive und passive Verzögerungsleitungen, Manchester-Encoder und -Decoder,
Verzögerungsoszillatoren, Pulsweitencontroller, Pulsdiskriminatoren, Pulsgeneratoren
(auch verzögerbar), Zeitgeber für DRAMs
Theo Stadlmayr, Ingrid Schmid, Sandra Henne
Hotline 0906 70693-66, [email protected]
Kabel · Stecker ·
Gehäuse
Konfektionierte Koaxial- und Mikrowellenkabel, konfektionierte Hohlleiterzüge, Gehäuse
und Frästeile, Steckverbinder gefiltert (keine Sub-D), Steckverbinder koaxial
Ulrich M. Frick, Ludwig Mair, Tülay Dilek,
Manuela Rister
Hotline 0906 70693-55, [email protected]
Litzen und Kabel
mit PTFE-Isolation
Drähte und Litzen, Rund- und Flachbandkabel, Hochspannungs- und Koaxialkabel mit
PTFE-Isolation als Meterware
Johann Kothmeir, Christian Beigl,
Bettina Briegel, Jasmin Schmuttermayer
Hotline 0906 70693-77, [email protected]
Regionalvertrieb
Region
PLZ
Ansprechpartner
Telefon
E-Mail
Deutschland
Südwest
54 – 56, 6, 7, 97
Jürgen Herold
Kurt Ortner
0163 70693-03
0163 70693-28
[email protected]
[email protected]
Nord
20 – 29, 30 – 33, 37 – 38, 49
Dieter Schmidt
0163 70693-05
[email protected]
Ost
0, 1, 39, 98 – 99
Frank Kramer
0163 70693-04
[email protected]
Jan Otáhal
Jana Šírková
+420 38 5510025
+420 38 5510143
[email protected]
[email protected]
Theo Stadlmayr, Ingrid Schmid, Sandra Henne
Hotline 0906 70693-66, [email protected]
Tschechische Republik
und Slowakei
České Budějovice
Bereich
Dienste
Ansprechpartner
Kundenservice
Kalibrierung, Reparatur, Prüfung, Wartung, Überholung, Nachrüstung
Andreas Kunze, Daniel Miehling, Daniela Schäferling
Telefon 0906 70693-19, [email protected]
Deutschland
Schweiz
Tschechische Republik
Telemeter Electronic GmbH
Joseph-Gänsler-Straße 10
86609 Donauwörth
Telefon +49 906 70693-0
Telefax +49 906 70693-50
[email protected]
www.telemeter.info
Telemeter Electronic GmbH
Romanshornerstrasse 117
8280 Kreuzlingen
Telefon +41 71 6992020
Telefax +41 71 6992024
[email protected]
www.telemeter.info
Telemeter Electronic s.r.o.
České Vrbné 2364
37011 České Budějovice
Telefon +420 38 5310637
Telefax +420 38 5510124
[email protected]
www.telemeter.info