Productivity Tools for AutoCAD Civil 3D

Productivity Tools
for AutoCAD Civil 3D
s
Ver
ion
2
6
1
0
Productivity Tools
for AutoCAD Civil 3D
CGS Civil 3D Tools are a collection of professionally developed tools that bring new functionality to AutoCAD Civil 3D,
Application
improve workflow and increase user productivity.
The Tools are fully integrated with AutoCAD Civil 3D. They are
easy to install and simple to use.
Highlights
Full integration with
AutoCAD Civil 3D
With the intuitive UI
that follows Civil 3D
concepts, Civil 3D Tools
are not just an add on
to Civil 3D. It feels like
working with native
Civil 3D commands. The
tools are working with
Civil 3D objects and
preserving the Civil 3D
object model.
Improving
productivity
With the new functionality and simplified
workflows you can create projects in less time.
Dynamic updating
Objects created with
CGS Civil 3D Tools are
dynamically connected
with the Civil 3D objects. User can control
how objects are updated, automatically or
manually on demand at
any time during designing process.
Continuous development
We are continually developing new tools. As
new tools are released
the user can easily update their Tools using
our fully automated update process.
Web page
Supported CAD
platforms
Productivity tools for AutoCAD Civil 3D
www.cgsplus.com
AutoCAD Civil 3D 2016 to 2012
Points
Zoom to a point
This tool enables Civil 3D users
to search for a COGO points in
a very simple way. Enter COGO
point name in a modeless dialog
and click find. Points that match
search criteria are listed in the
dialog. Wildcards are supported.
By clicking on search result, selected element is displayed on the
screen. You can select single or
multiple elements and put them
into AutoCAD selection set.
Add a Station and Offset to Points
Add a Station and
Offset to Points
Station points
along polyline
Associates points with an alignment and adds the appropriate
station and offset values to the
point. User can then create a
point table that shows the station
and offset of points.
Creates points along a polyline
at all the polyline vertices and at
specified stations.
Raise/Lower points
Extracts the AutoCAD blocks that
make up a Civil 3D point style.
This command allows the user to
select the points by a variety of
different selection methods. (All,
Group, Numbers or Selection
Raise and lower points by a specified elevation. This command allows the user to select the points
by a variety of different selection
methods. (All, Group, Numbers or
Selection).
Extract Blocks
from Points
Create/Edit Traverse
Grading
Survey
Grading
Grading tools enables you to create 3D projection polylines from
any polyline or feature line. Grading is defined with a set of grading criteria, which are applied to
a footprint. The following grading
criteria are supported:
•
Offset/Slope
•
Offset/Relative elevation
•
Slope/Relative elevation
•
Slope/Surface
•
Drape
•
Offset/Drape/Elevation
Alignments
and Profiles
Create Curb Return Profile
Automatically
create
vertical
curves from an existing curb return profile using the incoming
and outgoing grades. Civil 3D currently only creates a straight tangent between the incoming and
outgoing grades on a curb return
profile. This command will create the appropriate vertical curve
based on the Civil 3D curb return
profile whether it be one curve or
a reverse curve. The curb return
profile is dynamically connected
with the intersection.
Create Alignment
with Stick Method
An innovative and effective method of creating Civil 3D alignment.
It allows user to draw Lines, Arcs
and Spirals sequentially.
Create polyline
over profile
Create/Edit Traverse
Create/edit polylines by entering
traverse data (bearing/distance/
radius) into a table. This easy to
use tool can also be used to edit
existing polylines.
Pipes
Pipe Depth Report
This tool calculates pipe depths
for selected Civil 3D profile and
creates a summary report. We can
This tool draws polyline over selected EG or FD profile.
Create Profile
from Points
This tool creates a Civil 3D profile
from an alignment and selected
COGO points. It enables the user
to define left and right alignment
offset within the command as it
is searching for the points. Points
with lower or higher elevations
than expected can be excluded
from the selection.
Edit Pipe Profile
set different depth intervals: 0-8,
8-10, 10-12, … 20+. Pipe depth
can be calculated from: bottom,
invert, center, crown or top of the
pipe. If pipe profile is changed,
summary depth report is updated
automatically.
Edit Pipe Profile
With this powerful tool allows the
user to edit Civil 3D pipes in profile. Single or multiple pipes can
be edited easily. Users have full
control of how to edit the pipe
geometry. The tool allows the user
to define which pipe parameters
will be edited and which will be
locked. For example user can edit
a pipe run between two structures
by defining a new start invert and
the slope while preserving the
drop in the structures. This tool
dramatically improves Civil 3D
pipe usability.
Swap Multiple Parts
Select multiple parts in plan or
profile and swap them all at once.
Users can also swap between different pipe catalogs.
Pipe Network from
Multiple Polylines
Create a single Pipe Network from
Multiple polylines. Civil 3D currently only allows a pipe network
to be created from one polyline.
This command allows the user to
select on screen multiple polylines
then creates a single pipe network
from all the selected polylines.
Label Pipe Interference
This tool labels existing pipe network interferences in the drawing.
It creates a table with important
interference data, like Northing,
Easting, Elevation, etc.
Create Points
on Structures
Insert points at structures or
bends for selected pipe network.
Points are dynamically connected
with the structures.Miscellaneous
Miscellaneous
Polyline to LandXML
This tool converts poylines and
C3D Alignments to LandXML file,
specifically for Lieca Geosystems
gear. The LandXML output from
Civil 3D is different from what
Lieca require.
Label Assemblies
This command places a name
label on each selected assembly
in the drawing. Name labels are
dynamically connected with the
assemblies.
Dynamic Updates
With this tool, user can manage
danamic updating. Objects created with the tools can update automatically or manually anytime
during the design proces.
Dynamic updating
Import Attributes
This tool populates block attributes in the drawing with the values from an external file. User is
able to create custom attribute
mapping and save the template
for later use.
Versioner
The Versioner enables contractors to easily verify plans for the
latest versions on site by adding
a unique QR code to the design
sheet and consequently avoid
mistakes and mishaps caused due
to outdated documentation.
Every change made to the design
is instantly available to any mobile
device, smart phone or tablet with
installed Versioner mobile application. Users can easily identify if
drawing is current or out of date
by simply scanning the versioner
generated QR code with Versioner
Mobile App.
Versioner also offers a subscription mode enabling team members to get instant notifications
to their mobile devices about any
further design changes.
About CGS plus
2 5
Y e a r s
CGS plus d.o.o.
Brnčičeva ulica 13
SI-1000 Ljubljana, Slovenia
Phone: +386 1 530 11 00
Fax: +386 1 530 11 32
Internet: www.cgsplus.com
e-mail: [email protected]
Founded in 1990, CGS plus is a leading developer of software solutions and
tools in the fields of transportation, infrastructure, and AEC. Besides providing
a family of high-end civil engineering applications, CGS plus also offers Civil
3D and Revit software tools for civil engineers and architects, as well as customized CAD and BIM solutions for other companies and software vendors.
With offices in Europe and the United States, there are more than 8,000
customers in 33 countries currently using CGS plus software solutions worldwide.
SPACE
FOR
RESELLER
INFORMATION