hss MEtAl DRIll BIts / hss MEtAllBOhRER

HSS METAL DRILL BITS / HSS METALLBOHRER
L1
L2
HSS-GS double ended drill bit
Special twist drill, extra short, double ended, manufactured from
High Speed Steel to DIN 1412 C, ground from solid stock, split
point 135°. Finish: bright.
Suitable for sheet metal, thin steel plates, brass plates, zinc, sheet
copper, aluminium, synthetic materials.
HSS-GS Doppelendbohrer
Extra kurzer geschliffener HSS-GS, Spitze­nanschliff 135°
Kreuzanschliff nach DIN 1412 C.
Geeignet für Bleche, Flach- und Profileisen, Zink, Messing,
Kupferblech, Aluminium, Kunststoff.
L1
L2
HSS-GS steel drill bit – extra short
Special twist drill manufactured from High Speed Steel to DIN
1897, type N, ground from solid stock, diameter tolerance h8. Split
point at 135° (from D 3,0 mm). Finish: bright.
Suitable for drilling steel, cast steel, alloyed and non-alloyed
materials, spheroidal graphite cast iron, sintered iron, nickel brass
(silver), graphite.
HSS-GS Spiralbohrer – extra kurz
Extra kurzer geschliffener HSS Bohrer, Spitzenanschliff 135° Kreu­z­
anschliff nach DIN 1897 (ab D 3,0 mm) Typ N, Toleranz h8, blank.
Geeignet für Stahl, Stahlguss (legiert und unlegiert), Sphäroguss,
Sinterguss, Neusilber, Graphit.
size / Abmessung
D x L1/L2 (mm)
article-no.
Artikel-Nr.
size / Abmessung
D x L1/L2 (mm)
article-no.
Artikel-Nr.
2,5 x 43/10
020340302500
4,1 x 55/12
020340304100
3,0 x 46/12
020340303000
4,2 x 55/12
020340304200
3,1 x 49/12
020340303100
4,5 x 58/12
020340304500
3,2 x 49/12
3,3 x 49/12
3,5 x 52/12
4,0 x 55/12
020340303200
020340303300
020340303500
020340304000
4,9 x 62/14
5,0 x 62/14
5,1 x 62/14
020340304900
020340305000
020340305100
Packing unit: 10 pc/X-Pack
Verpackungseinheit: 10 St./X-Pack
size / Abmessung
D x L1/L2 (mm)
article-no.
Artikel-Nr.
size / Abmessung
D x L1/L2 (mm)
article-no.
Artikel-Nr.
2,0 x 38/12
020349802000
5,5 x 66/28
020349805500
2,5 x 43/14
020349802500
6,0 x 66/28
020349806000
3,0 x 46/16
020349803000
6,5 x 70/31
020349806500
3,2 x 49/18
020349803200
7,0 x 74/34
020349807000
3,5 x 52/20
020349803500
7,5 x 74/34
020349807500
4,0 x 55/22
020349804000
8,0 x 79/37
020349808000
4,2 x 55/22
020349804200
8,5 x 79/37
020349808500
4,5 x 58/24
020349804500
9,0 x 84/40
020349809000
4,8 x 62/26
020349804800
10,0 x 89/43
020349810000
5,0 x 62/26
020349805000
Packing unit :
D 2,0 mm - 6,0 mm: 10 pcs / St. /X-Pack
D 6,5 mm - 10,0 mm: 5 pcs / St. /X-Pack
Verpackungseinheit
HSS-G center drill bit DIN 333, form A
Special twist drill ground from High Speed Steel to DIN 333. Form
A, point angle 120°. Tolerance h9. Finish: bright.
size / Abmessung
D (mm)
length / Länge
(mm)
article-no.
Artikel-Nr.
2,0
40
020340402000
2,5
45
020340402500
3,15
50
020340403150
HSS-G Zentrierbohrer HSS DIN 333, Form A
4,0
56
020340404000
Geschliffener HSS Bohrer nach DIN 333, Form A. Spitzenanschliff
120°, Toleranz h9.
5,0
63
020340405000
6,3
71
020340406000
Packing unit :
1 pc/X-Pack
Verpackungseinheit: 1 St./X-Pack
Metal drill bits in cabinet
Metallbohrer im Bohrerschrank
8
type / Typ
content / Inhalt
article-no.
Artikel-Nr.
HSS-R
345 pcs / St.
D 1,0 - 6,5 mm x 0,5 mm / 8,0 mm 20 pcs / St.
D 7,0/7,5/8,5/9,0/10,0 mm 10 pcs / St.
D 9,5/10,5/11,0/11,5/12,0/12,5/13,0 mm 5 pcs / St.
020314100000
HSS-GS
255 pcs / St.
D 1,0/1,5/2,0/4,5/5,5/6,5/7,0/8,0 mm 10 pcs / St.
D 2,5 - 4,0 mm x 0,5 mm / 5,0/6,0 mm 20 pcs / St.
D 7,5/8,5 - 13,0 mm x 0,5 mm 5 pcs / St.
020314100001
HSS-Co
185 pcs / St.
D 1,0 - 6,5 mm x 0,5 mm 10 pcs / St.
D 7,0 - 13,0 mm x 0,5 mm 5 pcs / St.
020314100002