Manually configure the proxy settings on Internet Explorer (IE).

Manually configure the proxy settings on
Internet Explorer (IE).
Below is a step-by-step guide on how you could configure proxy on your Internet Explorer for
browsing the internet at UNITEN.
Step 1: Open up Internet Explorer go to Tools -> Internet Options:
1|Page
ITMS
Manually configure the proxy settings on
Internet Explorer (IE).
Step 2: Click the Connections tab, click LAN Settings, and then tick the
Use a proxy server for your LAN. (These settings will not apply to dial-up or VPN
Connections)
2|Page
ITMS
Manually configure the proxy settings on
Internet Explorer (IE).
Step3: In the Proxy Server section, click “use the proxy server for your LAN” and
“Bypass proxy server for local addresses”
Step4: Put the Proxy Server address: tmg.uniten.edu.my Port: 8080
Step5: Click Ok to finish the Configuration
Step6: Open the Internet Explorer Browser and it will prompt a box for username and password.
3|Page
ITMS
Manually configure the proxy settings on
Internet Explorer (IE).
Step7: Please type the Staff or Student ID in the box.
Step8: Please tick to “remember my credentials”
Step8: Your browser will automatic connected to internet.
4|Page
ITMS