SARCO, INC.

Transcription

SARCO, INC.

SARCO, INC.
We still have .50cal BMG G.I. electric automatic
linking machines new in the box. See our website
$2495.00 M2HB273
50 Hilton Street, Easton PA 18042
www.e-sarcoinc.com
www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
Phones Open: Mon - Fri,
8:30am – 5:00pm
Showroom Open: Monday Saturday, 10:00am – 5:00pm,
Friday til 8:00pm
E-mail: [email protected]
Keep your receiver
firm & straight
We have a few .50 cal M2HB Kits complete less
receiver $3750.00 Call or email Dave
.50 CAL MG PARTS & ACCESSORIES
U.S. PEDESTAL MOUNT SOCKET
Accurate late production socket used
to make pedestal mounts like the
M25,M31, etc. for jeeps, half tracks
and all sorts of custom mounts. Accepts standard USGI cradles. Comes
with T-handle lock and pre drilled hole
in base section for providing another
method of fastening the socket if you choose
not to weld it to a pedestal tube. Bottom outside
diameter @ 2-5/8"..................... $85.00 MNT024
ISRAELI CRADLE MOUNTS FOR
1919A4 MGs AND MAG-58 ITNEEMW
!
Used military cradles in good condition.
They have some minor rust, missing connection pins for the gun, and covered in
dust from the ‘Holy Land’, but they traverse
and elevate perfectly, and acceptable pins
to hold the guns in place can be obtained at
hardware stores. We offer the cradle mount
as is, shown top left, or also with the ammunition can holder, shown top right.
CRADLE without can holder
.....................................$175.00 MNT122
CRADLE with CAN HOLDER
.....................................$250.00 MNT123
.50 BMG M7 CLEANING ROD
5 sections - G.I. $19.95 M2HB284
1 PC. G.I. 50 CAL CLEANING ROD
Found a few more
SALE! $19.95 M2HB042
Over Stock Sale on
Pintles for M2 & M3
Tripods $65.00 MNT019
.50 M2HB RETRACTING
SLIDE ASSEMBLIES
We have resolved the
missing parts & now
have comlete assemblies
on the shelf.$325.00
ea. (few only) M2HB014
Finally available again, current
new production .50 CAL BMG HEADSPACE
& TIMING GAGE ASSY
Finally got some more, not too many
$64.95 3 for $179.95 M2HB016
U.S. WWII .50CAL MG EQUILIBRATOR
CRADLE ASSEMBLY
$249.50 Fits all U.S. cradle sockets. U.S. G.I.
Part #704-6650 MNT002
WWII .50 CAL AMMO CAN
HOLDERS
For vehicle mounts $96.50
MNT065
.50 CAL M2HB BARRELS, STELLITE
$595.00 M2HB196
.50 BMG M3 TRIPOD
T&E Mechanism
G.I. Very GoodExcellent
$195.00 MNT022
NOTE: .50 CAL DUMMY GUN
Projects – We still have a few of some lower
grade parts for dummy guns –
no more sets.
Email or call Dave for what’s available
M2 .50 BMG RIVETS SETS
Complete set for receiver 74 small & 6
big rivets $49.95 M2HB017
M2HB dress up kit flash
hider,carrying handle. Barrel cover.
$74.50 M2HB280
.50 BMG M2HB REAR
SIGHT ASSY
G.I. brand new $175.00 M2HB051
.50 CAL BMG TOOLS AVAILABLE
779-9739 Firing Protrusion Gage....... $30.00
710-6326 Oil Buffer Rod gage............ $36.50
745-8406 Firing pin hole gage............ $22.50
50 CAL BRONZE BORE BRUSHES
5 for $9.95 M2HB129
We have most parts for the M3 .50 cal machine
guns. Both in new G.I. and also “deco”condition.
Email or call Dave for your needs
We always have M10 chargers
in stock. We also have M10
charger parts
Used .50 cal backplate grips
.................................... $10.00/set M2HB295
Used .50 cal RSG handle.....$12.00 M2HB296
Set of all 3 pcs.....................$18.95 M2HB297
Brand new .50 M2 MG Parts –
See our website!
WANTED TO BUY
.50 CAL BMG M7 HAND LINKERS
Available again! We had a long dry spell
but found a lost lot and bought ‘em!
Original G.I. in the grease out of the crate
$74.95 ea M2HB038
Note: The following .50 cal items are still available
on our website.
M2HB281 New backplate refurb kit
M2HB267 Extended cover latch
M2HB294 Ultimate dress up kit
M2HB283 Watercooled tool kit
MORE .50 CAL GOODIES
1. New G.I. .50 cal M7 cleaning rod case
........................................... $19.95 M2HB302
2. New .50 cal RSG handle...... $37.50 M2HB072
3. .50 cal M7 Cleaning Rod w/Case
........................................... $35.00 M2HB284
4. .50 cal M7 Cleaning Rod........ $19.95 M2HB274
5. Late M2HB Buffer, spool type............... $95.00
6. Ramo type QCB barrel extension..... $600.00
7. Ramo type QCB barrel handle &
bracket assy ................................... $150.00
8. Ramo type QCB plastic barrel handle,
plastic only ........................................ $50.00
9. M3 Bolt Stripped, exc., new................$475.00
10. M3 Bolt Complete, exc., new ..............$675.00
11. M5 Link Repositioning Machine, exc.,
....................................................... $600.00
12. M4 Swab Section- this goes on the
end of the M4 cleaning rod to clean out the bolt
..............................................$6.95 M2HB263
13. New G.I. M2HB back plate grips
.................................... $12.50 ea. M2HB020
14. RSG and Rear grips dress up your M2HB – 2
backplate grips and RSG handle, new
........................................... $49.95 M2HB158
LIKE NEW! .50 CAL M2HB COMPLETE
BACKPLATE ASSEMBLY With
grips, trigger, bolt latch release,
etc. $465.00 M2HB079
B GRADE .50 CAL M2 PARTS
1.Extractor...............................$30.00 M2HB299
2. Belt feed lever.......................$16.00 M2HB164
3. M2HB barrel extension with minor
cut – see our website for picture. Use
for dummy gun or?..............$75.00 M2HB306*
4. Rusty M3 barrel extension – new
intact but rusty fits in an M2 $45.00 M2HB021
5. M2HB bolt w/cut on bolt (cut varies)
............................................$40.00 M2HB307*
6. Sear........................................ $5.00 M2HB317
7. Carrying Handle, needs straightening
.....................$15.00, 5 for $60.00 M2HB282
See our website for pictures *
All above parts are sold as-is. No returns.
.50 CAL. BMG CLEANING ACCESSORY KIT
All & Any parts for the M60 Light
Machine gun – New or Used – Big pile or Tiny pile.
Even some demilitarized parts. Call MG Dave or
Cholly. Bolts, bipods legs, stocks, covers, barrels,
& all other parts – misc assortments accepted.
1-Brush, bore
#5504307
1-Ratchet chamber brush
#7790737
1-Cleaning rod M4
#5564102
1-Brush, firing pin hole
#7162702
1-Swab holder section
#7162704
1-Broken shell extractor
#7160041
1-Brush, chamber & general cleaning, M6
#6108828
Over $50.00 worth of equipment.
SARCO SPECIAL PRICE $33.95 M2HB285
B3
M60 MG RECEIVER “CONTINUITY” GAGE SET
This U.S. Govt. issue gage set is indispensable if you own the M60 machine
gun. 5 piece set of gages & pins, in padded Govt. issue case is used for a number
of checks on the expansion of the receiver
components which is a common problem. This gage will allow you to
keep any problems in check before you end up with major problems!
It will also work as a fixture if welding of the receiver / trunnion is
needed as called for by Ordnance, dept. directives. U.S. Govt. paid
over a thousand dollars for these. We only have a handful remaining.
Excellent condion. FSN#4933-903-0967.............. $295.00 M60002
RARE AND HARD TO GET
.50 BMG GOODIES
1. .50 cal chuting - email Dave
2. .50 cal M4 Cleaning Rod M2HB293............ $7.95
3. .50BMG barrel erosion gage #727-4725.....$300.00
4.
100% new G.I. .50 stripped bolt in original G.I.
wrappings..............................................$695.00
5. Aircraft barrel shrouds
A. New M3 w/booster.............................$200.00
B. Used ANM2 w/front bearing...............$125.00
C. New M3 w/booster, some pitting.......... $65.00
D. Exc. to new ANM2 w/front beari........$200.00
6. Ammo Can Holder, Late G.I M2HB321.....$195.00
7. Backplate grip nut spanner tool............... $22.50
8. Barrel Carrier Assy................................... $39.50
9.
Bore erosion gauge 4933-317-2503 new
................................................................ $99.50
10.Broken Shell Extractor, lever type............ $24.95
11.Canadian M2HB barrel- Rusty - super rare - bore
may be able to be cleaned up.............. $$200.00
12.Cleaning Rod, G.I. one piece rod. The best! M2HB042
................................................................ $14.95
13.Complete M19 .50 cal M2HB Blank Firing Device.
This is one cool one. In the new G.I. silver bag
M2HB309................................................$595.00
14.Complete set of rivets for a .50 M2 receiver, (74
small and 6 big rivets).............................. $49.95
15.Flash Hider Assy...................................... $37.50
16.G.I. tool for removal of M2 .50 backplate screw &
also as a bonus removal of water cooled M2 .50
packing gland. M2HB240........................... $16.50
17.Grip firing handle for M3AA mount #B290191, New ................................................................ $45.00
18.Link catcher bag with zipper button snaps on to
cradle assy – new G.I. M2HB279................ $35.00
19.M2HB .50 barrel support, factory new M2HB135
............................................................. $175.00
20.#M2HB143 .50 cal. M2 ratchet chamber cleaning
brush.................................$5.95, 3 for $11.95
21.M3 traversing T&E bar MNT031............... $75.00
22.M3 tripod pintle lock assy MNT075
................................................................ $50.00
23.Original .50 cal M2 watercooled link bag D34388
......................................................... $99.95 ea.
24.Orig. M85 barrel – fair bore VG out
..............................................................$495.00
25.Sideplate trigger (M63 mount).................. $75.00
26. Steel night vision scope mount for all Brown in .50 cal stock # 5855-911-0703. Clamps on to gun. Also
good to mount a scope............................. $99.95
27.T-23 Belt repositioning machine.............$595.00
28.WWII belt holding pawl pin....................... $15.00
29.WWII trigger bar pin................................. $15.00
30.WWII rear sight w/scope mount.............$350.00
31.Water cooled .50 bronze barrel bushing for trunion.
................................................................ $65.00
32. Wrenches (2) for .50 cal water cooled – orig G.I.
holding plus adjusting wrenches for adjusting the
breech end packing gland M2HB283.......... $49.95
33..50 G.I. late ammo can holder for all .50 cal mounts,
new MNT025...........................................$175.00
.50 CAL INERT AMMUNITION
FOR DISPLAY
Finally back
in stock and
cleaner & brighter
than ever, this
inert ammo looks
great as the cases
and projectiles are
polished brass & copper. No holes drilled
in the cases and the
expended primers
are still intact. Perfect
for displays, military
aircraft, or vehicles!
Each round....................... $2.50 AM019
Belt of 10 rds, linked.................. $22.00
Belt of 50 rds., linked................. $95.00
(Be sure to comply with your State or
Local regulations in the few States where
they apply, when buying linked inert
ammo)
1. .50 cal M3 tripod mount hood
...............................$14.95 M2HB171
2. .50 cal spare barrel cover U.S
.............................. $14.95 M2HB093
We still have our M2HB .50 cal
survival packs (M2HB001) & our
Survival Spring Kit (M2HB003).
Please check our website.
G.I. ANM2 OR M3 AIRCRAFT BARREL
Dummy gun grade - ok outside
...................................... $75.00 M2HB253
TM1055-213-25
THE CLASSIC .50 MANUAL
With all the exploded views and tech data .......................................$12.95 SB021
M3 TRIPOD WITH PINTLE & T&E,
Original, VG................. $1200.00 MNT110
SAVE YOUR BELOVED M2 .50 BROWNING
We have had proper step-by-step instructions for head space & timing adjustment of your .50
printed in a 2-sided sealed plastic card. Keep it with your gun or in your pocket or tool box - You
never can be too careful. $2.00 ea, 3 for $5.00 M2HB275
MG34/M42
MG42 BARREL CARRIERS
Again not
available for a
long time. VG condition. Single
barrel carrier. $39.95, 3 for
$99.95 MG42021 Rare double
barrel carrier $65.00 MG42022
MG34 BELTS & STARTER TABS
50 rd belts Exc cond $5.95,
10 for $4.95 ea. MG34075
Starter tab $4.95 MG34011 Not
for sale in New Jersey!
M60 MG
INTERESTING M60 ITEMS:
• Unserviceable M60 bolts – intact but not
suitable for firing.................... $20.00 M60110
• M60 Barrels for dummy guns – welded
but usually nicely done.......... $89.95 M60013
• M60 night sight mounting brackets also
adaptable for scope mounting.................$85.00
Not cheap but necessary
• Original M60D helicopter ejection control
bag with frame – 1 only (rare)............$600.00
• 1 pc. M60D spade grip backplate asy.$600.00
• Original padded assault sling. $19.95 SLNG002
• Blank firing adapter................ $34.95 M60043
• Early G.I. canvas bandoleer 5 for.$9.95 M60101
WANTED TO BUY: .50 cal MG barrels.
Any condition. Small or large quantity –
Call or email Dave
NOTE to WASHINGTON STATE
RESIDENTS We CANNOT SHIP a part into
Washington State that will work only in a
machine gun.
See our website for complete list of M60
parts & accessories
MG42 PISTOL GRIPS
New production – nice job! Will
also fit Yugo M53
$24.95 MG42010
MG42 SLING
Just in the door – beautiful
repro, complete $24.95
SLNG083
NEW!
ITEM
NEW MG34 BARRELS
A few more brand new Israeli MG34 barrels 8x57mm. The best MG34 barrels!
$149.50 MG34002 While they last!
Special of the month $124.95
WWII MG34 STARTER TAB
(ORIGINAL GERMAN MARKED)
We have a
very limited
number of
Original
German WWII
machine gun belt starter tabs. Getting very
difficult to find as most on the market are
Post War Yugoslavian. Our tabs have both
date & production code. We also have some
that are just marked with the factory code
and a very small number that are actually
from the 1930s. We offer them as follows:
1. STARTER TAB w/ WWII Date and Code..
................................................$9.00 ea,
3 pcs for....................... $25.00 MG34104
2. STARTER TAB w/ WWII code only
................................................$8.00 ea,
3 pcs for....................... $20.00 MG34105
3. STARTER TAB w/1930’s date & code
................$20.00 Very Limited. MG34106
CHECK OUR WEBSITE FOR LONG
LIST OF MG34 PARTS
MG34 PARTS & ACCESSORIES
MG34 BRASS OIL CANS
Brand new – beautiful....... $9.95
3 for............... $24.95 MG34107
BASKET MAGS
$45.00
MG34014
German
markings
UNIVERSAL SMG MAG LOADER UZI
Sten, MP40, etc etc small quantity.$7.95
M60 BARRELS
Complete M60 barrels, gas system, bipod, etc. exc
– new condition $665.00/set M60011
M60 E-2, E-3 AND M6OD PARTS
We have some parts for the various M60 versions.
CONTACT DAVE in our Machine Gun Department
for information. Just in, a few E3 Bipods.
M60 7.62MM LINKS
200........................................... $20.00
1,000........................................ $48.00
5,000...................................... $200.00
10,000.................................... $375.00
M60 MG PARTS SET
Note: These are all refinished, NOT as they
come out of the junk yard. M60005
M60 RECEIVER RAIL SETS
We have just bought the last of the
pile of M60 receiver components only a
dozen each.
Included are left, right & bottom
rail. These are old new production
from years ago. Found at a gun show. New production – may need a bit of deburing – may have
a slight bow, easily fixed. Sold as-is, no returns
$99.95 a set-a few only M60108
M60 TRUNIONS
These are 90% or more finished. Only need
minor finish machining or cleaning up. All
major operations are complete. These are actually
better then the ones we had before $199.50
each M60103
M60 MG RIVET SET
Set consists of the 25 rivets
required to build the receiver/
MG $29.95 M60117
ORIGINAL G.I. NEW RATCHET CHAMBER BRUSH FOR
M60 LMG – this is the correct ratchet brush with
the extended shank to clear the M60 barrel extension. Great for other .308 guns as well… $7.95
ea, 3 for $19.95 M60116
M60 HANDGUARD RIB REPAIR PLATE
These get torn out. Complete with manual
instructions. We made ‘em for our use.
See our website for full description
$9.95 ea, 3 for $24.95 M60113
M60 MG AN/PVS4 SIGHT BRACKET
Original aluminum sight bracket
in exc condition with fasteners.
Used with passive night and day
sights.............$85.00 M60008
SARCO, INC.
www.e-sarcoinc.com
/ www.sarcoinc.com
E-mail:
[email protected]
610.250.3960 Fax: 610.250.3961
.45 CAL MAGAZINE LOADER
FOR M3 GREASE GUN
But works on Inghran, Commando Fox,
Apache, Eagle, etc. Marked “Cobray”
GG057$7.95 ea,
3 for $19.95
ORIGINAL M3 GREASE GUN EXTRACTORS
$69.95 GG024
WE HAVE PARTS FOR FOLLOWING MGS
AND CANNON & RECOILESS RIFLE
Check our website or
email Dave.
1. Russian DSHK 12.7mm
2. Reising model 50, 55, & 60 .45 cal
3. Russian DP-28
4. M73 .308 LMG
5. FND – Belgian BAR
6. CZ VZ23 & VZ25 SMG
7. Hotchkiss M1926 LMG
8. Alpha HMG
9. Canadian C-1
10. 106mm
Recoiless Rifle
11. M8 Spotting rifle
12. FN made .50 MG
13. MG34
14. M85 U.S. .50 MG
15. Breda Model 30
16. 57mm Recoiless
Rifle
17.Carl Gustav 84mm Rocket Launcher 18.MAS 38 SMG
Also Many Other MG’s
GERMAN MP44 LOADER &
TAKE DOWN TOOL
Accurate well-made
ammunition loading
tool and weapon take
down tool as issued
with the gun
in WWII. Essential items
and will save
your fingers
the wear and
tear. Works
with original and repro mags $9.95 MP44004
MP44 GRIP SETS
GRP141 Beautifu repro MP44 grips–
Just in! Made in wood just like the
original $24.50
FEW MORE GOODIES–
SMALL QUANTITY
1. Lewis .303 barrel–little seedy out. VG –
exc bore.................................. $200.00
2. 8mm Vickers barrel, excellent
condition.................................. $200.00
3. Inghram Model 6 Recoil Spring....$20.00
4. PPSH41 Trigger Housing Assy.....$75.00
5. PPSH41 Bolt Assy........................$75.00
6. Hotchkiss HMG Combo Tool........$45.00
7. Hotchkiss MKI barrel – nice original
.303 barrel, VG/Exc bore. Has
regulator & front sight.............. $750.00
8. KG9 replacement barrel – ¾" x10 TPI
thread at muzzle (tech 9 variant).$39.95
9. Orig. Suomi Brass Catchers(SMG)
...................................................$50.00
10. Telescope elbow M114Army..... $200.00
11.M79 Wooden stock & handguard, new
orig.............................................$64.50
14.Original G.I. new M73 LMG barrel
..................................... $195.00 M3701
15.New original military Madsen Saeter
barrel in .308 NATO cal (done by CIA
for Indonesia?)
...................................$195.00 MMP010
16. E
xc cond Boyes .55 cal AT rifle barrel
............................................ $1,000.00
17. R
are M60 Polygonal rifled barrel. Came
out of Saco Defense (Maremont) we bought
it there................................ $1,495.00
18. 20mm hand linker tray type........$59.95
19.1 only – Boyes AT rifle bolt complete
..............................................$1000.00
20.40mm grenade ammo bandoleers 3 for
..................................................... $4.95
21.A couple original U.S. military new
buttstocks for the rare Benet Mercie
U.S. light machine gun...... $500.00 ea.
TRAVERSING & ELEVATING
MECHANISMS FOR THE M2 & M122
TRIPOD AVAILABLE AGAIN!
Small quantity VG-Exc cond.
Orig, G.I. $195.00 MNT021
Over Stock Sale on Pintles for M2
& M3 Tripods $65.00 MNT019
PARTS FOR .22 LR CAL BROWNING
MACHINE GUNS & CONVERSIONS
See our website or email
Dave.
Please have part number of the
items you want to purchase ready
when you call.
WW2 P08 LUGER & P38
PARATROOP MODEL
HOLSTER
Low profile skeletal
brown leather holster
used for reducing
profile and weight of
carrying a pistol in
combat conditions.
Ruggedly stitched by
a saddle maker and
embossed with Waffen and German
mfg codes. Fits both guns and similar
styled frames. Belt loops on back. New
Mfg........................... $16.95 HOL109
GERMAN MP44 POUCH
SET
Pair of MP44
pouches for right
and left hip,
each holding 3
mags and having accessory
pouches as well. Heavy canvas with
black leather trim just like the originals. Also marked with Waffen amp
and Date/ Production code.
Set ..........................$32.95 MP44005
GERMAN A-FRAME &
COMBAT PACK
Excellent repro of
the A-Frame harness
and Combat Pack
issued to German
Infantry. We struck
a great price on
providing both items
as a set. A Frame is
ruggedly made with
thick canvas and black leather straps
and correct metal fittings. The Combat
pack is a faithful reproduction too
and has German wartime markings.
Bargain priced at
................................$37.50 MISC383
(Compare elsewhere at $55 and higher!)
20mm HAND LINKERS STILL
AVAILABLE! See our website!
MP40 WWII MAG POUCHES
BACK IN STOCK
A beautiful and true
to original pouch set,
trimmed in black
leather. Of course it
has the tool pouch
and D rings. $19.95,
3/........................... $54.95 MP4009
Other MP40 items, beautiful proper
repro sling just like the original
............................. $17.50 SLNG056
Replacement Extractor
.............................$64.95 MP44010
BREN MAGS IN A CHEST
AVAILABLE AGAIN
12 original magazines in an original
chest..........................$99.95 BREN005
Please refer to our hi-cap mag restrictions.
LANCHESTER EXTRACTORS
Almost gone! $35.00 each MISC206
BACK AGAIN
It was a sell out & small
lot available. Orig G.I.
Browning M6 combination wrench..................$19.95 TOOL037
BAR SLINGS AVAILABLE AGAIN!
$19.95 BAR008
We still have a few parts for the
Browning ANM2 .30 caliber and
7.62 Aircraft MG’s. Contact our
MG dept for quote.
We have a neat Lewis gun put away kit
with lots of goodies – See
E-Sarcoinc.com!
C3
Phones Open: Mon - Fri,
8:30am – 5:00pm
Showroom Open: Monday - Saturday,
10:00am – 5:00pm,
Friday til 8:00pm
1919A4 .30 CAL MG PARTS
RARE & HARD TO GET
.30 CAL. BMG (ALL MODELS)
GOODIES
1. 1917 overall gun cover for gun & ammo can
holder, new G.I......................$100.00 A4188
2. 1917 water cooled blank adapter
.....................................................$75.00
3. 1917 w.c. sight parts:
Windage screw bushing.................$12.00
Windage knob...............................$12.00
Rear st. leaf spring........................$17.50
4. 1917 w.c. proper backplate assy.
.......................................... $65.00 A4153
5. 1919A4 extended muzzle bearing 8 ¾"
.......................................... $49.50 A4253
6. 1919A4 extended muzzle bearing 16 ½"
.......................................... $49.50 A4254
7. A4 late adjustable front sight post
.......................................... $19.95 A4237
8. A6 Jacket. New..................... $100.00 A4109
9.
Complete Set of rivets for a .30 BMG receiver
............................................... $35.00 ea.
3 for ........................................ $99.50 A4052
10. Late style top cover latch with plunger
.......................................... $35.00 A4097
11. Metal clip for bottom of pistol grip to latch
back the T&E mech................. $12.95 A4236
12. M7 1917 water cooled gun covers with
leather reinforcing, new G.I...... $75.00 A4166
13. M1917 W.C. Top Cover latch, new
.....................................................$65.00
14.M2 tripod traversing Bar........$50.00 MNT040
15. M2 tripod pintle lock assy......$45.00 MNT082
16. M37 retracting bar................ $150.00 A4143
17. M37 barrel extension............... $65.00 A4231
18. M37 .30 cal complete bolt w/extractor
....................................... $495.00 A4270
19. M37 cocking stud.................... $15.00 A4229
20.
M37 back plate damaged (bullet) easy for fix for
dummy gun.......................... $100.00 A4230
21.New Browning 1917 watercooled LMG-rear
sight leaf assembly complete, 2 only.$495.00
22. New original blue 1917 muzzle gland – couple
only......................................... $44.95 A4260
23.New original brass cork assembly for 1917
water cooled Browning............. $34.95 A4271
24.New original browning 1917 watercooled top
cover with sight base............ $135.00 A4219
25. 1917 watercooled rear sight leaf assembly, new
.................................................. $295.00
26. Orig G.I. new 1917 water cooled grip sets
.....................................................$19.95
27. Orig M37 bolt switch................ $65.00 A4269
28.
Original G.I. steam tube for 1917 & 1917A1
watercooled, very rare...................... $100.00
29. Original M37 Trigger................ $45.00 A4257
30. Original M1919 WWII bolt pouch.$7.49 A4128
31. Orig. G.I. new 1917 WC plastic grips
............................................... $19.95/pr
32.
Rare early cone shaped muzzle bearing for
1919A4 WWII......................................$65.00
33. Steam condensing device......... $44.50 A4180
34. tripod covers for A4 MG tripod G.I. NEW M2,
nice with accessory pouch & drawstring.................................................$14.95,
3 for......................................... $39.95 A4154
35. 1919A5 retracting bar (handle) in orig G.I. wrap
.......................................... $75.00 A4272
36. 1919A4 Original safety bar – very seldom seen
.......................................... $99.95 A4273
37. Brand new orig. G.I. .30-06 1919A4 belt
feeding pawls........................... $14.95 A4191
38. 1919A4, 1917 etc. Browning right hand front
cartridge stop, new.............................. $5.95,
3 for......................................... $14.95 A4105
.30 CAL. BROWNING MACHINE
GUN “SURVIVAL PACK”
Here is an assortment of the key parts
you need to keep your Browning .30
cal. working. These ARE the good
parts which do wear out or break,
not just a bunch of parts we are trying to sell. Over the years we have
seen these to be the parts most often
ordered by our customers. We have
packed them in plastic so you can
stash it away for that rainy day when
you may need some spares..30 BMF
Survival Pack Contents: (1 each of the
following)
200 .308 links, Trigger spring, Firing
pin, Breech lock, Accel. pin, Breech
lock pin, Belt feed pawl spring, Front
sight blade, Buffer plate, Belt feed
slide, Buffer lock screw, Barrel extension, Top cover latch assy., Barrel
lock spring, Belt holding pawl, Trigger,
Left holding pawl pin & spring, Over
$190.00 worth of “survival” parts for
only......................... $49.95 A4049
See our website for full list of
Browning A4 & 1917 parts.
SOLENOIDS – SOLENOIDS – SOLENOIDS
Top plate - side plate - backplate –
even a solenoid for the M240 in ana
m60 tank (got lots) 12 volt & also
24 volt – we got ‘em! How about a solenoid gun charger for an M3 gun in a
gun pod!! Call or email Dave
1919A4 OR A6 EXTENDED
BOLT HANDLE
Gives you a good solid “grab” on the
charging handle. All for only $13.95
A4207
1 1/4"
1919 BROWNING M2 TRIPOD
ASSY STIMULUS PACKAGE
New Current Production
$345.00
3 for $995.00
Complete tripod with T&E &
Pintle MNT112 Note: Comes
w/FREE G.I. tripod head cover
HEAD SPACE & TIMING GAUGE FOR
1919A4, M37, 1917
WATERCOOLED
Made from A2 tool steel and hard chrome
plated for durability. Needed for safe and
reliable operation of your MG. Finally
available again. $35.95 A4056
.30 CAL. BROWNING 1919A4
SPRING KIT
M1919A4 BROWNING
ACCESSORY KIT
A wonderful assortment of parts and accessories to go with your M1919A4 Browning MG.
The kit includes one of each of the following
items:
belt feed lever canvas pouch barrel lock ring
barrel lock spring chamber brush 7.62 mm
cam, lock breech
firing pin
accelerator pin
barrel extension
plunger, brl. ext.
spring cover extractor accelerator
Over $100.00 in value! SPECIAL PRICE only $39.95/set!!
A4054
BROWNING 1919A4 ANTIAIRCRAFT RING SIGHT
NEW!
ITEM
Flexible steel folding ring sight for the
1919 series of guns. Allows you
to fire using a large ring sight as
WW2 Aircraft gunners used. When
you fold the sight down, there is
a front sight ring for use with the
standard rear sight ! Best of both
worlds! Installs in about a minute
using the same main front sight
screw that is on the gun already
$44.00 A4274
BROWNING CLOTH BELT FOR 1919A4
MACHINE GUN
White cotton,
new. Great fit!
Good for .308
and .30-06.
$14.95,
5 for $54.95
A4276
Also good for 8mm
All of the good springs in a .30 BMG.
COMBINATION .30-06 & .308
One each of the springs for the following
(7.62 NATO)
parts: Cover extr, rear sight leaf spring, Broken shell extractor U.S. G.I. contracbelt holding pawl, trigger, barrel lock.
tor made. Special sale $5.95 ea,
SARCO SPECIAL PRICE for 1919A4
BSE002; 3 for $14.95,
Spring Kit.
10 for $39.95
$7.45 or 3 for $19.95 A4127
U.S. BROWNING .30 CAL.
& 7.62MM M.G. BARRELS
A40281919A4 barrel .308 cal VG full
chrome lined barrel
.................................... $69.95
A4182 1919A4 barrel .30-06 got wet rusty
or poor bore, decorator blaster
No refunds............. $25.00 ea,
........................10 for $195.00
A4185 1919A4 U.S. G.I. barrels in .30-06
Good Cond................... $75.00
A4259 1919A4 .308 barrel chromed
lined, exc cond
................................ $94.95
Email Dave for availability
No returns on A4246 and A4182 - sold as is.
1919A4 SPADE GRIPS
These are the Cadillac
of spade grips. They are
built by a U.S. military
contractor so you know
they are the best. Uses
full size .50 handles
so your hands are not
cramped. Serrated trigger pad so your
thumb won’t slip off. Heavy steel construction assembled and parkerized, just drop
them on. Limited Supply $325.00 A4255
For M1919A4 – 1917 etc. Finest we have
ever offered
Orig. Israeli IMI .308 (7.62mm) new
Links for 1919A4, A6 & 1917 Brownings converted to .308. These are
reusable links. # A4115
Special 2000 at $67.00/1000
1000 at $70.00/M
3000-9000 at $65.00/ M
10,000 at $60.00/M
Can be used for .308, .30-06,
or 8x57mm
We have parts for M37 Browning Check our
website or email Dave
U.S. G.I. PINTLES & T&E’s
Hard to come by any more.
1. Pintle for M2 or M3 tripod.......$65.00 MNT019
2. Trav. & Elev mechanism for .50 cal M3
Tripod..................................$195.00 MNT022
3. Current production M2 & M122 tripod T&E,
new......................................$135.00 MNT114
4. M60 T&E mechanism with T&E adapter and
pintle adapter.......................$295.00 MNT121
5. T&E mechanism for M2 & M122 tripod,
VG to Exc. cond., orig G.I..... $195.00 MNT021
Bought in a few more-
1919A4 U.S. BROWNING
MG KITS
Small quantity available standard 7.62
NATO (.308) kits – all parts but R.H.
sideplate. Last chance
............................... $1495.00 A4046
Found a few .30-06 1919A4 kits
............................... $1595.00 A4047
Shipping on kits: West Coast
.............................................. $45.00,
East Coast & Mid West........... $25.00,
Alaska & Hawaii...................... $95.00
Please Note: All kits for the moment
come with .30-06 rear cartridge stop.
Easily modified to .308 with a dremel
tool. We will include instructions.
COMPLETE RIVET SET FOR
1919A4 BROWNING
Thousands of Sarco rivets sets sold
....................................... $35.00
3 for......................$99.50 A4052
WWII U.S. SHOTGUN AMMO. POUCH
12 Ga. Shotgun pouch
used by soldiers in
WWII. This late manufactured pouch holds
12 rds. In individual
loops and has two belt
loops on the back to use with a standard belt.
Khaki color with ‘lift the dot’ snaps.
......................................... $12.95 MISC303
SARCO, INC.
SARCO,
INC.
D3
www.e-sarcoinc.com
www.sarcoinc.com
E-mail:
[email protected]
610.250.3960 Fax: 610.250.3961
UD42
NEW
Original 25 rd. 9mm UD-42
ITEM
!
magazines! Found a handful from one of our
sojurns into southern Europe.
Probably OSS issue items left
with Partisans. Good condition
with some minor oxidation, but
serviceable. Almost impossible
to find these days!........................... $125.00 MISC369
ABOUT
HIGH CAPACITY
MAGAZINES:
ITALIAN BM59
RIFLE PARTS SETS
323
Union
Street • P.O.
Box 98 •These
Stirling,
NJ 07980
Although we try to stay abreast of current
are all of the parts except the receiver for
WEBSITE: www.e-sarcoinc.com
State gun laws, it is a herculean task with
the early model 7.62mm Italian BM59SL rifle.
over 20,000 laws on the books. By orderThis rifle is essentially a standard M1 Garand
ing, you are stating that you are complying
semi-automatic that has been modified to use 20
with your Local & State laws . Most States
rd. BM59 magazines, and has been chambered
allowPhone
large capacity
Some
do 8:00am
for 7.62mm
Nato ammunition.
• M-F
Ordersmagazines.
& Inquiries
– 4:15pm
(EST) It retains the well
not. If you are unsure on this issue, conproven Garand sights, trigger mechanism and
tact your Local or State law enforcement to
gas system, while doing away with the 8 round
confirm what is allowed. This is a partial
Garand clip in favor of a 20 round detachable
list of States with some hi-capacity restricbox magazine. These parts sets can be assembled
tions: NJ, NY, MA, MD, HI, KS, CO, CT, IL
on an M1 Garand receiver which will require a
and various county laws therein including
few modifications to accept the new feed system.
Chicago, D.C.
Parts are in very good condition, bores are nice.
908.647.3800 • Fax: 908.647.9413
BM59002 $595.00 ea.
You can convert a Garand receiver. Set of blue prints
for BM59 receiver: With kit $29.50 BM59003
Without kit $49.50 BM59004 (Note: BM59 prints
are for the full auto only and are for dimensional
reference only)
Just got a great report from a customer who built
one of our BM59 kits on a Garand receiver with our
parts It came out FABULOUS
10 rd. AK-47 MAGAZINE
GREAT DEALS ON MAGAZINES!!
RIFLE MAGAZINES
Steel 10 rd. 7.62x39mm Magazine
with black oxide finish. Perfect for
the range or for those in States that
restrict large capacity magazines.
$14.99 ea, 3 for $35.99
AK054
D3
A1
BASIC
BM59 Getting
low!
KIT
This kit includes all the unique BM59 parts – all
other parts are interchangeable with Garand. This
allows you to get your basic kit at an affordable
price and you can acquire the Garand type parts
by shopping or trading around but this will let you
get your kit stashed.
Stripped BM59 bolt, original muzzle break,
trigger housing with mag catch assembly,
bolt hold open with pin & spring, operating rod,
operating rod spring and guide, safety spring,
stock, rear handguard, front cartridge guide &
magazine catch & pin, barrel (good VG cond) and
magazine. All other parts are interchangeable with
Garand $489.00 BM59030
SPECIAL OF THE MONTH $395.00
Getting low!
Original BM59 Mags $59.95 BM59-001
Extra mag with above kit $49.50 ea. BM59014
FAL 20 rd
M14 20 rd
new $19.95 metric, new
$17.95
RM024
RM63
AK47 30rd
Yugoslavian,
original exc
condition
$22.95
AK056
AK47 30rd
Korean, exc
condition
$14.99
AK057
MACHINE GUN MAGAZINES
AR15/M16 100rd
drum w/bag,
loader, new
$119.95 AR383
AR15/M16
50rd drum, new
$99.95 AR422
AK47 75rd drum, new
$69.99 AK007
M1 Carbine
30rd, new
$14.95
CRB008
Browning cloth belt for
1919A4 machine gun, white
cotton, new. Great fit!.
14.95, 5 for $54.95 A4276
AK47 30rd composite, new $9.95
or buy 2 get one FREE AK015
M1 Carbine
15rd, new
$12.95
CRB010
M3 GREASE GUN 5 RD
MAGAZINE
Glock 50rd
drum, new
$69.99
GLK17022
UZI 32rd
steel
$18.95
UZI100
AR15/M16 Orlite synthetic 30 rd 5.56mm................................................. $20.00 AR126
AR15/M16 PMAG, 30 rd, 5.56mm........................................................... $12.95 GAL097
AR15/M4 PMAG GEN M3 MOE, 30 rd, 5.56mm................................. $13.95 MAGPUL056
AR15 15 ROUND HEX POLYMER MAGAZINE..............................................$15.99 RM65
BM 59 20 rd, .308................................................................................. $49.50 BM59014
BREN LMG, 20rd, .303............................................................................. $8.00 BREN007
BREDA 30 LMG, 30rd............................................................................... $200.00 RM52
CETME, 20rd, .308................................................................................... $20.00 CET008
CHATELLERAULT M24/29 LMG, 25rd, 7.5mm............................................$20.00 RM27
DANISH M40/M1941, 100rd Drum, 8mm.............................................$250.00 MISC287
DP28, 47rd drum, 7.62mm.......................................................................$25.00 DP2806
DPT, 30rd drum, 7.62mm....................................................................... $30.00 MISC220
FAL, 20rd, 7.62mm......................................................................................$17.95 RM63
FND LMG, .30-06, 20rd........................................................................... $10.00 FND005
GALIL BLANK FIRING MAGAZINE, 35 rd, .223......................................... $19.95 GAL097
GALIL 50RD MAGAZINE.......................................................................... $29.95 GAL004
M8 SPOTTING RIFLE 20RD MAG, .50CAL............................................ $125.00 106R021
MAS 38 SMG, 32rd, 9mm............................................................................$25.00 RM26
MG34 50rd BELT, 8mm........................................................................... $5.95 MG34075
Mini 14, 30rd, .223..................................................................................$25.00 MINI404
MP34 SMG, 32rd, 9mm...............................................................................$35.00 RM32
OERLIKON DRUM, 20mm...................................................................$275.00 MCAN017
PPSH 41 DRUM, 71rd, 7.62.................................................................... $40.00 MISC269
SCORPION SMG, 20rd, .32.......................................................................$19.95 SCR008
STEN SMG, 32rd, 9mm............................................................................$25.00 STN007
SWEDISH K SMG, 30rd, 9mm....................................................................... $45 SWK038
THOMPSON SMG, 30rd, .45.................................................................... $30.00 TMP074
UZI SMG, 25rd, 9mm................................................................................ $18.95 UZI099
UZI SMG, 32rd, 9mm................................................................................ $18.95 UZI100
YUGO.M56 SMG, 30rd, 7.62........................................................................$45.00 RM45
ZB-26 LMG, 20rd, 8mm...............................................................................$49.95 RM55
M25 Pedestal Mounts
M31C Pedestal Mounts
New Original Travel Bar for MK 93 Mount
GI ammo can holder for MK 64
& MK 94 cradle assembly
Swedish Model 36 water cooled
MG AA Tripod
Parts for Tripods and T&E’s, for M2,
M122, Ms, 1917 water cooled and
M63 parts have for all.
or email Dave at
[email protected]
SWEDISH K
PARTS
MORE RIFLE/SMG/ LMG, LARGE
CAPACITY MAGAZINES
Please go to our website for
the following Machine Gun
Mounts and Mount parts.
SEE OUR WEBSITE FOR
!! NEW UZI SMG BARRELS !!
FINALLY ARRIVED!!
Brand new
production – Perfect
if you bought an
Uzi kit without a barrel! Others get
$100.00 to $125.00.
Sarco price............................. $84.95
3 for......................... $239.95 UZI142
Would you believe we have a few Lyle
Line Throwing Gun Firing Mechanism
parts? Check our website!
ORDERING INSTRUCTIONS
~ There are different procedures for Ordering PARTS vs Ordering FIREARMS ~
PHONE ORDER – Call (610) 250-3960 ONLINE ORDER – Go to www.sarcoinc.com
FAX ORDER – (610) 250-3961 MAIL ORDER – Sarco Inc, 50 Hilton St, Easton
PA 18042 SHOWROOM VISIT – Mon-Sat 10am-5pm / Friday Opened til 8pm
All items are not available on site, so if you want to pick up something, please
call ahead so we can arrange to have the goods ready for your visit. For directions to the showroom, see website.
RPD DRUMS
with 100 round belts - Found a few more
in the warehouse. New or like new condition $59.95 RPD14 While they last!
Check our 10th issue or
our website for info
on Hi Cap Mags
NEW
ITEM
!
Late manufacture, 5 rd. steel
magazine for the
M3 series of Grease
Guns. Comes with
original WW2/
Korean war rubber
dust cover. These
are the last of the M3 ‘shorty’ mags on
the market...................$14.95 GG068
AR15 15 ROUND HEX
POLYMER MAGAZINE
Just in and bound
to be popular in
states where a 15
rd. capacity is in
effect. These mags
look like a 30 rd.
mag, and are covered with front and
rear ribbing and
honeycomb sides for secure gripping. This is a strong, well made
5.56 magazine in black. New
............................ $15.99 RM65
NEW CONDITION DSHK
CRADLE ASSEMBLY
For DSHK tripod – Only 1 available..
$1400.00
SHIPPING
ALL ORDERS WILL BE RECEIVED, PROCESSED AND SHIPPED OUT OF OUR PENNSYLVANIA LOCATION.
MINIMUM SHIPPING AND HANDLING CHARGES START AT: $9.50
Rifle Stocks and Barrels…. $12.50
Call for larger items on prepaid orders
* NJ residents please add 7% sales tax. Not all
items available to NJ residents.
* PA residence please add 6% sales tax
All orders to Alaska and Hawaii shipped via
US Mail, unless customer specifically requests
Blue or Red Label UPS (not available for online
orders). Employees not authorized to modify
prices or conditions stated in this advertisement.
REGARDING LOCAL, CITY & STATE
REGULATIONS!
SARCO makes a large effort to keep abreast of
state & local gun laws. With over 20,000 laws
on the books this is a Herculean and impossible
job. Some of the products sold by SARCO could
be restricted for sale in your local area, while not
restricted nationally. This could include, but not
be limited to firearms, ammo, parts, high cap
mags, edged weapons, air guns, etc. You must
determine your right to purchase, own, use or
resell specific products offered by SARCO in your
jurisdiction. As local laws are constantly changing, it your responsibility to determine if a product
is prohibited before ordering from SARCO. You
warrant by ordering from SARCO that you are
a legal adult without any legal restrictions from
ordering and are complying with all state, local,
and federal laws. Please check your local laws
before ordering.
GHURKA KUKRIS KNIVES
Once Again Available — We’ve been
Dry for 6 Months
The fierce ghurkas
are the elite fighting
troops of the Indian
Army. Their very
presence on the field of battle will often cause an
enemy to fear for his life, due to the blood thirsty
reputation of these fierce fighters. Every ghurka
carries a Kukris knife, which he can use to deadly
effect in hand-to-hand combat. We now have a
nice selection of Kukris knives. Each knife comes
in a black leather scabbard with two small “skinning” knives mounted on the scabbard
1. 12 inch Military Kukris.......... $23.50 BAY044
2. 6 inch Kukris............................$9.95 BAY055
3. 12 inch Military, Brass........... $24.95 BAY157
4. 13 inch M1937....................... $26.95 BAY059
MG & SUB MACHINE GUN
CLEANING RODS
PPSH41 swivel handle new cond.$19.95 MISC203
Beretta model 38 series.............. $14.95 CLN123
Thompson steel rod...................... $6.00 TMP070
Thompson brass rod VG.............$20.00 TMP072
Thompson brass rod new............$24.95 TMP167
FND cleaning rod........................$10.00 FND011
Madsen model 1950/53 SMG rod brass.. $15.00
CLN001
Yugo Model 56 SMG.......................$45.00 RM45
The BM59 era is coming to an end. We
originally had 3300 kits and they are selling
very briskly in todays market. We have given
up on building guns. Just can’t generate the
time. Get your kit stashed now. We may have
Garand receiver castings available that can be
machined into BM59. See our availability of
BM59 receiver blue prints above. BM59 equals
an M4 at an affordable price.
MILITARY TRAKKER PRECISION
REAR SIGHT AS USED ON REMINGTON M24 SNIPER RIFLES
Originally applied to
Military M24 Sniper
Rifles as the backup
‘iron sight’, These military surplus sights are
in excellent condition
and present a host of
tight tolerance variables in application of
windage and elevation adjustments. Comes with
a 22 mm eyepiece and a generous 30 minutes
of windage settings. Windage & elevation knobs
present distinct clicking without loss or distortion
of incremental settings. Solid, durable, with a
weight of 7.76 ozs................... $225.00 SGHT15
GERMAN WW2 MP40 MAGAZINES
Original wartime
German issue magazines with markings
NEW
and in very good
ITEM
!
condition. These are
the standard 32 rd 9mm steel magazines ..................................... $75.00 MP4002
Call or Email Dave with your machine gun questions. Planning a trip to our Easton Store?! Contact
us in advance so we can have the parts ready for
you! Please allow a few days especially for large and
odd parts. [email protected]
Our ads in the Shotgun News are catalogue prices
and may not reflect any sales or higher pricing
found on our website. Prices are subject to
change without notice. We are not responsible
for typographical errors or misprints.
PLEASE NOTE: Please, do not send us your
original parts for comparison. We are not responsible for lost, damaged, or misplaced parts in transit
or upon receipt. Please include only a picture
and dimensions of parts needed for comparison.
Thank you.
ORDER PROBLEMS,
Damaged or Missing Packages
Call (610) 250-2960 and ask for Liz ext 208 or email [email protected] BACKORDERS
Check the status of an existing Backorder, Call (610) 250-3960 or email: [email protected] SARCO deals in modern as well as obsolete and hard to find merchandise and
offers full & prompt refund on any cancelled backorders prior to ship. WEBSITE Questions
or Issues Call (610) 250-3960 and ask to be transferred to the e-Commerce Department or
email [email protected] INTERNATIONAL Call (610)250-3960 and ask for Mike ext 210 or
email [email protected]
RETURNS
We offer a 5-day inspection period on all of our merchandise, except for special order items which are not
refundable. Items that state they are sold “as-is” are not returnable.
· PHONE ORDERS, EMAILED, FAXED OR MAILED-IN ORDERS: You will need a Return Authorization Number to
return something. Please email [email protected] or call (610) 250-3960
for a RT #. Feel free to check on the status of your return, credit or refund.
· ONLINE ORDERS: Please visit our website www.e-sarcoinc.com and click the Return Policy link. Fill out the
printable form and mail it back with your package. Feel free to email our e-Comm department at ecomm@
sarcoinc.com to check on the status of your return or call (610) 250-3960 and ask to be transferred to the
e-Commerce Department. We do not refund any shipping cost unless the error/problem causing the return
is our fault. Returns may be subject to a 10% restocking charge.
OUR GUARANTEE - Our guarantee is simple and easy to understand. If you are not satisfied with any item
received from us you have 5 days to return it for a replacement or a refund of the advertised price. All
returns must be accompanied by a letter WITH YOUR INVOICE NUMBER and explanation of the problem.
All returns must be in the same condition as you received them-any alterations or work will void the guarantee. Special order items not returnable. We can not accept returns on TOOLS unless the tool is defective.
We do not refund any shipping costs unless the error/problem causing the return is our fault. Returns
may be subject to 10% restocking charge. Send all shipments pre-paid. CODs will be refused. Any items
returned due to customer’s error are subject to a 10% restocking charge. ($2.00 minimum). As we do not
install the parts we sell, we cannot guarantee they will function when installed by others. For proper function and safety, many gun parts should be installed by a competent gunsmith - see our disclaimer:
DISCLAIMER - Parts sold by Sarco should be installed only by a competent gunsmith. These products are sold as
is and without a warranty. No liability is expressed or implied for damage or injury which may result from the
improper installation or use of these products. Sarco only sells products to persons 18 years or older.
“NOTE: This advertisement is not intended to solicit sales, nor will orders be accepted from states or jurisdictions
in which the possession, receipt or advertisement of an item contained herein is prohibited by law.”
SARCO, INC.
FAL PARTS SET
Get ‘em while
Long ago we acquired a small lot of early FN manufactured kits from ‘conflict zones’ in the
Western
Hemisphere,(Americas).
Although many of the rifles had sustained battle damage,
they last!!
we have culled these out and can offer you the parts sets of these veteran rifles. These original
metric FALs exhibit features of the early ‘G’ series FAL that have been so elusive. The Stock &
handguards were in rough condition so we have replaced them with a new original steel military
handguard set (value $90.00 – Handguard will be different than pictured) and an original new military period wood buttstock compatible with the early buttplate & swivel, (original buttplate and swivel
are included). The barrel has been demilled, but the attaching parts are present
including the swivel, regulator, front sight, gas block and flash hider. Bolt carrier,
bolt assy, cover, charging handle, piston & spring, and other associated parts are
present. No upper receiver. Great set of parts for building that Early FAL rifle that
you‘ve always wanted.
E3
www.e-sarcoinc.com / www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
We offer these kits in 2 configurations:
A. Complete kit with new wood buttstock and an original FAL metal handguard
.................................................................................................$275.00 FAL297
B. Complete kit without stock and handguard, but with pistol grip
................................................................................................ $195.00 FAL298
Don’t miss out on these early FAL kits! - Only have a small lot.
****Also if you purchase a kit, we can offer the following ‘add ons’:
***BIPOD – Original Early Pattern............................................................... $19.95
***MAGAZINE LOADER..................................................................................$2.95
***MAGAZINE, 20 RD................................................................................. $17.95
BRITISH FAL/L1A1 SNIPER
CHEEK PAD
Rarely found on the
surplus market, this
black leather cheek
pad is uniquely
designed to fit the tapered FAL stock and
provide comfort and a slight incline for the
cheek to rest when using the sniper scope.
Available in brown or black. Please specify
when ordering..................... $20.00 FAL288
L1A1/FAL NYLON SLING
original $6.95 SLNG043
EARLY ISRAELI MODEL A FAL
STRIPPED LOWER RECEIVER
exc cond...........................$99.95 FAL249
ISRAELI HEAVY BARREL FAL (FALO)
WOOD CARRYING HANDLE ASSEMBLY
Haven’t had these for years.
These can also be used as a
longer wood handle on a regular FAL.
$29.95 FAL279
GO TO OUR WEB OR E-COMM SITE FOR
NEW ORIGINAL KNUCKLE PIVOT BOLTS
FOR FAL PARA FOLDING STOCKS
A LUCKY FIND!
NEW!
ITEM
Brand new original Belgium
Fabrique National – Composite pebble grain stock. $24.50 ea
3 for $59.95 FALB020
FAL MAGAZINE LOADERS
Original Military.......$4.95,
3 for.............. $9.95 FAL167
ORIGINAL ISRAELI PATTERN
FAL HEAVY BARREL BIPODS
Found a few only........................ $65.00 FAL007
We have finally obtained some Israeli pattern
heavy barrel bipod couplers........ $64.95 FAL232
Combo Special HB Bipod and coupler
................................................ $119.95 FAL287
Note: Rotation lock not included
ORIGINAL NEW OR LIKE NEW FN
PATTERN FAL HEAVY BARREL BIPODS
WITH ORIGINAL COUPLER/FLASHIDER
Others get $100-$125 just for the bipod FAL277
Our price for both only...........................$94.95
These original flashider/couplers have been
unavailable for years.
Bipod only FAL273...................................$65.00
3 for.................................................... $175.00
Flashider & coupler only FAL278..............$39.95
Note: The coupler & flashider does not include
the rotational lock-we will have these later.
ORIGINAL EXC NEW – ISRAELI FALO HEAVY
BARREL BUTTPLATE ASSEMBLY
With shoulder piece - just found a few more!
.................................................. $34.50 FAL070
L1A1 PARTS & ACCESSORIES
Australian L2A1 Bipods
Good used condition.................$40.00 L1A1001
Good to very good L1A1 Pebblegrain Stock
................................................$24.95 L1A1037
Used excellent L1A1 Buttplate.... $8.00 L1A1020
L1A1 Gas Plug Body - New Parker Hale
................................................$19.95 L1A1046
New Original pebble grain L1A1 pistol grip
Good Condition.........................$13.50 L1A1036
Original L1A1 Flashider.............. $7.95 L1A1026
Gas Tube New...........................$19.95 L1A1042
Original New Israeli FAL heavy Barrel
stock & forend set $39.50 FAL147
STEN SMG
ISRAEL GAS PISTONS
Found a small lot
$24.95 ea. FAL018
JUST IN THE DOOR
Brand new original Israel FAL grenade
launcher..............................$19.95,
3 for......................... $49.95 FAL289
California Law forbids sales to
residents of Calif.
NEW (OLD STOCK) ORIGINAL
ISRAELI STANDARD WOOD STOCKS
Found a few more in
the warehouse. Original
brand new wood Israeli
STANDARD FAL stocks.
Will also fit other model FAL rifles.
May have minor blems from 50 years of storage.
STD stock FAL068.....................................$39.95
New Israeli carrying handle FAL031...........$16.50
New unblemished FAL stock FAL272.........$49.95
Free new wood cocking handle with each set purchased.
Forends may show some signs of long term storage.
FAL TOOLS
1.Magazine Loader, (stripper clip guide)
PN-1135-1505 2 for..................... $5.75 FAL167
2.Broken shell extractor.................. $5.95 BSE013
3.Chamber cleaning tool................. $2.95 FAL171
4.Buttstock removal tool...............$14.95 FAL127
5.Special 1 of each of the 4 tools above
.................................................. $32.00 FAL265
6.Israeli 5 function combination tool – Israeli
marked......................................$9.95 TOOL038
NEW FAL METRIC & L1A1 GAS TUBES
Metric FAL gas tube, new
Will also work on inch guns.......... $14.95 FAL250
New original Metric FAL gas tubes.$19.95 FAL220
New original FN Pattern Chrome Lined FAL Gas
Tubes.................$19.95, 3 for $49.95 FAL220
Used original Metric FAL gas tubes..$9.95 FAL251
L1A1 New gas tube.....................$19.95 L1A1042
Note our new lower price above on FAL
gas tubes.
METRIC FAL BIPODS
brand new original military – FN
pattern never before
available. $34.95 3 for
$94.50 FAL219
FAL METRIC PARTS
FAL246 Blank firing adapter Israeli...... $14.95
FALB023 Belgium butt swivel, orig, brand
new............................................$9.95
FALM073 Carry handle........................... $12.00
FALM044 Charge lever assembly............. $12.00
FALM057 Ejector block........................... $20.00
FALM020 Firing pin................................ $10.00
FAL034 FN metric lower stripped w/recoil
spring tubes............................ $59.95
FAL243 Gas pistol spring, new
......................... $4.95, 3 for $11.95
FALM054 Hinge pin................................ $10.00
FALM067 Hold open device assembly...... $20.00
FALM068 Mag catch &spring.................. $12.00
FALB023 New Belgian FAL butt swivel....... $9.95
FALB020 New Original Pebblegrain Stock....$24.95
FAL210 Original Israeli (Marked) FAL Lower
(Stripped)........................ $125.00 ea
FALM055 Rear sight complete..................$35.00
FALM029 Top cover.................................$12.00
Please go to our websites for virtually all other
Metric FAL parts
FAL QUAD RAIL FOREND
Precision high quality Weave/Picatinny
quad rail fits perfectly on your L1A1 or
FAL. Fast and easy to install and the
6061 Aircraft aluminum is protected with
a hard Coat anodized finish. Comes with
Hex tools........................ $59.99 FAL254
Steel grips as used in
WW2 to make the Sten
MK2 SMG even shorter for
close in fighting and Para
operations. Easily attaches
MK2
in seconds by sliding the
stock off of the receiver
and sliding the grip
in place to be locked in by the buffer cup.
Very limited quantity.
STEN MK2 COMMANDO GRIP $17.95 STN107
STEN MK 5 KITS BACK IN STOCK!!
See our website
STEN GUN ACCESSORY PACK
Three piece set of
some of the important
items issued with
the gun during
WW2. Set includes
an original magazine
clip on loading tool,
Sten sling and a reprint of the 1942
British military Soldier’s manual.
$19.95 STN113
RHODESIAN BUSH WAR
MAGAZINE CHEST RIG
Fereday & Sons
style Rhodesian Bush War
bandolier used for
holding FAL or G3
magazines. Also
has two straps
for holding grenades, shoulder
straps, and waist strap which will
work up through a 2XL size torso!
A great lightweight patrol rig. Will
hold similar sized mags
....................... $22.95 MISC336
STEN MK2 PARTS KIT
ORIGINAL BRITISH STEN
GUN MAGAZINE LOADERS
STEN GUN ‘COMMANDO GRIPS’ FOR
STEN MK2 SMGs
Just off the boat. Back again after many
years! $14.95,
3 for $39.95 STN019
SPECIAL OF THE MONTH
$9.95, 3 for $24.95
STEN GUN BARRELS FOR MK2 & MK3
A. MK2 BARREL Brand New in the
white
$74.95 STN029
B. MK3 BARREL Brand New in the
white.........................$74.95 STN108
Sten MK2 barrels temporarily sold out
– But coming back in soon! Order now
and you’ll be the first on the list!
Properly cut British Sten MKII Parts Set
consists of T-buttstock, bolt assy. and
recoil spring, magazine housing with
catch assy./lock/ejector, trigger housing
with internals, cover & screws, rear &
front sight, and rear caps. Our fabulous
price may not last long as these guns are
getting more difficult to find overseas! Get
one before they run out. This kit does not
come with a barrel.
MKII kit w/o barrel
.................................. $139.95 STN028
MKII kit with barrel
.................................. $204.90 STN030
*Almost all States allow ownership of this
kit, but we recommend you consult your
local & State laws prior to ordering.
STEN MK3 PARTS SET
Properly cut British Sten MKIII parts set with
T-Stock, bolt assembly w/cocking handle, trigger
housing w/internals, cover & screws, magazine
housing w/catch assembly, ejector and front
& rear sight, recoil spring and rear caps. Also
includes about 1-3/4” of the front muzzle receiver
tube with front sight. This kit does not come with
barrel. Add a barrel to this kit for the discounted
price of $64.95 (barrels regularly $74.95)
MK3 kit w/o barrel.................$89.95 STN098
MK3 kit with barrel.............. $154.90 STN112
*Almost all states allow ownership of this kit, but
we recommend you consult your local & State
laws before ordering.
Add a barrel to this kit for the discounted
price of $64.95 (barrels regularly
$74.95)
STEN MK-2 SMG DISPLAY GUN
Outstanding new arrival of a non-firing,
all metal replica of the venerable Sten
Gun used since WW2. Stock is removable,
bolt can be charged, and magazine is
removable. We have two versions in stock:
STEN MK2 WITH SLING & MAGAZINE
..................................... $145.00 REP22
MILITARY ISSUE MOUNT STANAG’ FAL SCOPE MOUNTS
Original FN contract scope mount for the FAL rifle. Each mount is fastened to
a standard metal FAL rifle cover and the mount can be reversed, depending
on the scope and eye relief required. Standard Nato lug notches are inset for
settling the scope in place. We offer two versions: Standard Stanag Mount, and
Paratrooper Stanag Mount for which there are distinct differences in the metal
cover used. These are in excellent shape, but may have some slight blemishes
from being stored for 20+ years. SARCO is selling these at a fraction of the original price!
A. STANDARD FAL STANAG MOUNT.............................................................................. $74.95 FAL195
B. PARATROOPER FAL STANAG MOUNT ....................................................................... $99.95 FAL196
SARCO also offers a “PICATINNY RAIL ADAPTER” so you can attach a “world”
of different products on the scope mount to include scopes, lasers, lights etc.
C. PICATINNY RAIL ADAPTER........................................................................................ $19.95 FAL244
*RED/GREEN DOT SCOPE*
SARCO also sells our Stanag Mounts with a versatile Red/Green dot scope, with fast on/off locking levers.
Features:
• Emerald lens coating/anti glare -unlimited eye relief.
• 4.0 MOA dot sight with red or green illumination.
• Flip open front & rear caps.
• Illumination rheostat w/ various brightening levels / adjustments.
• Fits Picatinny mounting rails - Which is why we can offer it to you with one of the STANAG MOUNTS at a package price!
SCOPE W/ STANDARD STANAG MOUNT............................................................................................................... $129.95 FAL280
SCOPE W/ PARATROOP STANAG MOUNT............................................................................................................. $149.95 FAL281
PURCHASE EITHER ITEM# FAL 195 OR 196 - and receive an original night vision mount adapter.
PURCHASE EITHER ITEM# FAL 280 OR 281 - and receive a Picatinny Rail Adapter!
TAKE 15% OFF ANY OF THE ITEMS IN THIS BOX!!!
PLEASE NOTE:
We have moved our individual extensive FAL, L1A1, & FN FAL parts
listings to our website. Please check there for these. If you have
no access to the Internet we will be happy to mail you a copy.
Found a few like new... ARGENTINE FAL HANDGUARD SETS, original $89.95 FAL294
A FEW ORIGINAL BELGIAN FAL BARREL GAS
BLOCKS $39.95 FAL295
SARCO, INC.
G3
E-mail:
[email protected]
www.e-sarcoinc.com
/ www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
ITALIAIN BM59 - E MODEL BM59 MOUNTAIN/ JUNGLE
A stalwart weapon of the Italian Army in .308, and with a
23.5" barrel and 20 rd. magazine. These are
excellent shooters and became popular with 12 foreign
military branches from South America, Africa, & Asia. Look
closely at guerilla fighters in Ethiopia, Eritrea, or Nigeria, and
you may see them still being used. Bonus is that many of the
same parts are shared with the M1 Garand!
............................................................$1295.00 GUN590
MODEL RIFLE
Sometimes referred to as
‘carabina neve’, (Snow carbine),
or mezzafredamorta,
(Half frozen to death), this
model sports a 17.5 inch
.308 barrel and bipod as well as a 20 rd. magazine. Meant
for units involved with mountain warfare where weight and
carry loads were restricted. Ruggedly built like a Garand,
and uses many of the same parts as an M1 Garand. Very
limited
.......................................................... $1395.00 GUN591
BM59 RECEIVER
We have a few BM59 receivers which are converted from USGI Garand receivers, machined,
annealed, heat treated, and reparkerized. Good for building BM59, 62 & 69 models.
Very nice shape & without pitting......................................................... $600.00 GUN589
BM59 ‘APENNINE’ MODEL
BM59 configuration rifle in .308, made
with a U.S. modified M1 receiver, 20
rd. magazine, bipod, grenade launcher
sight, and muzzle booster. Comes w/
GI stock and parts are finished in black
oxide. See our web site for other details
$1,600.00 GUN585
Built the same way they were built in Italy,
on modified Garand receivers.
STAR MODEL B – “SECOND
MODEL”
Production
started in 1931
and ended
in 1983 9mm para blue
finish. Good bores. Good –
VG $265.00 GUN438
GALIL .223 RECEIVERS
We found you small lot of Galil .223
receivers. Only a few available
.........................$399.95 GUN289
ORIGINAL WALTHER
PP 7.65 ACP
$325.00
GUN382
Good-VG
Have 2 only
NAZI MARKED WALTHER PP
Same condition $795.00
Call Mike Wilm to reserve one
BM59 PARATROOP CONFIGURATION
7.62 x 51 mm
SARCO has a few of these really cool Folding Stock rifles built
on the Italian BM59 configuration. The rifle is constructed on
a U.S. M1 Garand receiver, with Italian BM59 and U.S. made parts, 20 rd.
magazine, bipod, grenade launcher sight,
flash hider, and finished in black oxide.
See our web site for further details…
$1,700.00 GUN586
Built the same way they
were built in Italy, on
modified Garand receivers.
STAR BM
SKS RIFLE STARTERS KIT
STAR MODEL
30PK
EXTRA SPECIAL!
Steel frame, 4"
barrel plastic
grips
Good $269.00
GUN440
9mm Dural frame 3.86
barrel 15 rd mag.
Blued Good $225.00
GUN409
para (9x19)
STAR BS
The BS in a
normal second
model B but has the addition
mag safety. Made from
1957-1983
Good-VG $275.00 GUN434
Cash or trade for your transferable
machine guns – only legal guns –
call MG Dave. We’re buying!! Form
5 (unserviceable) guns acceptable.
WE HAVE BEEN WORKING OUR PILE OF
OVER 50,000 GUNS. WE FORGOT WE
HAD A LOT OF THESE GOODIES
Original 1898 Krag receiver from old, old,
old government auction. Very good
condition ............................... $49.95,
3/.........................................$139.95,
10/...........................$299.95 GUN549
THE ACCLAIMED COONAN FAL RECEIVER IS AVAILABLE
AGAIN! OVER 100 IN STOCK!
Highest quality made on precision CNC machines to
high tolerances. Black parkerized finish. These receivers
will work with any metric FAL kit. Many have compared
the quality of the Coonan receiver to the old “Gear Logo”
Imbel receivers. Attention Argentine kit builders! These receivers are cut to clear the
hammer pin on Argentine lowers! Note: The rear foot on the rear of the receiver may
need to be slightly trimmed to properly lock on the Argentine lower. We have machined
a witness mark to show how much you might need to trim (a Sarco exclusive).
GUN367 – Receiver with carrying handle cut
GUN368 – Receiver without carrying handle cut
Either receiver...............................................................................................$325.00
3 for..............................................................................................................$945.00
Our SKS barreled receivers with all the
below parts included:
• Take down lever • Front sight base
• Stock & handguard set
• Rear sight assembly • Spike bayonet
• Piston extension • Piston return spring
• Hold open latch • Bolt
• Firing pin • Extractor • Recoil spring
We’ll also include FREE:
• Gas port cleaning tool • Cleaning kit
pouch • Stripper clip • Cleaning jag
• 2 leather sling tabs
All this including the barreled
receiver for only $149.50,
3 for $419.95 GUN563
You get the fun of hunting for the
rest
Stunning Price Busting Deal of 2015!
PARA ORDNANCE LDA PISTOL PACKAGE
Brand new LDA complete Frame assembly in
original Para Ordnance box! You can purchase
this alone or reap tremendous savings on
purchasing this with a SLIDE of your choice.
The Para steel Frame accepts 3.5 inch and 4.25"
slides and can be used with 3” slides if the hood is trimmed
back - Will not work with a 5” slide. The frame is the Officer’s
Model LDA, single stack, and is not caliber specific so you can
customize it to 38 Super, 9mm, 40 S&W, .45 ACP. The frame is cut for the
Clark® type ramped barrels. The barrels and recoil spring assemblies are
available from numerous commercial sources and the frame accepts the
shorter 1911 Officers magazine. Enormous savings will be realized when you
examine these prices against the price of a new LDA pistol of at $700-800!
1.Frame assembly in box................................... $235.00 GUN588
2.Slide of your choice – 40% off retail price online! Go to our website and choose
from a host of 3", 3.5" & 4.25” Para LDA slides. Valid on up to
10 Para LDA slides when purchased with Frame assy in box.
Go to www.e-sarcoinc.com to make your selection.
Note: Para Ordnance Light Double Action Pistols are premium
compact firearms popular for ‘concealed carry’ and well respected
for quality and performance. Para Ordnance has been absorbed into
Remington, and Sarco will also have a position in selling many of
the original quality parts. In fact, our substantial inventory of Para
Ordnance parts, will allow us to supply parts for many, many years
to come!
PARA ORDNANCE MAGAZINES
Brand new batch of original Para Ordnance magazines has arrived!
RPM295 14rd .45 cal double stack for full size P14 series, Blue steel w/numerical
round markings............................................................................. $29.00
RPM296 10rd .45 cal double stack, for full size P14 series, blue steel with numerical
round markings............................................................................. $28.00
RPM297 8rd .45 cal single stack, for full size Govt. 1911/Para. Blue steel w/
numerical markings....................................................................... $24.00
RPM298 8rd .45 cal single stack, for full size 1911, Blue steel with round markings.
Made by Checkmate...................................................................... $24.00
RPM299 6rd .45 cal single stack, small for ‘Officer’ and ‘Agent’. Blue steel... $19.00
RPM300 9rd 10mm single stack, for full size govt. 1911. Stainless steel....... $23.00
RPM301 7rd 9mm single stack, for small ‘officers’ model. Stainless steel..... $21.00
RPM302 9rd .38 Super single stack, for full size Govt. 1911, blue steel........ $17.00
AR LOWER RECEIVER & KIT
Great Deal on Bushmaster lower receiver.
Just...............................................................$79.95 GUN574
Also can offer the Bushmaster lower receiver with the lower
receiver internal parts, grip, and collapsible buttstock, recoil
spring and buffer........................................ $149.95 GUN579
GOOD OLE’ DAYS #3
Original German 98 Mauser
Actions Once again available – we haven’t sold these for years now.
Original European made actions by Great Firms as DWM, Mauser,
etc Built at the height of Mauser production. Actions are with all
milled parts – May have minor pitting. Less than 100 left!! While
they last............................................................ $145.00 GUN004
GOOD OLE DAYS #5
BRITISH ENFIELD
BUILDERS PROJECTS
BUILD YOUR OWN GOODIE FROM YOUR
OWN PARTS, STASH & “BUY INS”. BARRELED RECEIVERS AND RECEIVERS FOR
#3 (& #4 ENFIELD & 308 2A) JUST IN
THE DOOR
1.Barreled receiver for #1 MKIII Enfield
................................$49.95 GUN536
2.Barreled receiver for #4 Enfield
................................$49.95 GUN537
3.Barreled receiver for model 2A .308 cal
(762mm) Enfield.......$59.95 GUN538
WW2 GERMAN LUGER PISTOL
LANYARD
Leather lanyard for use with Luger
pistols. Complete with leather cinch and
leather connector. Faithfully made from
an original w/ German markings. 45"
long............................... $7.95 MISC384
Original Chinese SKS Barreled Receivers
Bought from Brickless Trading 20 years ago – been
sleeping for years. Good condition. Build your own
Chinese SKS. Buy the whole assembly for the price
of a barrel!$79.95, 3 for........................................................... $224.95 GUN531
1903A3 SPRINGFIELD RIFLE
New original GI barrels installed on these rifles with
1940s production dates. Overall excellent condition.
Most parts are “like new” G.I.! Superb Guns! $595.00
GUN325 SEE OUR WEBSITE FOR OTHER PICTURES.
FOR OUR SPRINGFIELD RIFLE BYERS
Your choice of an original straight stock or a new production “C” stock. Every gun has been head
spaced. ALSO:HBO PACIFIC SERIES 1903A3 SPRINGFIELDS. We have a few left! Check our website!
98 MAUSER LARGE RING, Long ACTION RECEIVER,
MODEL 38 TURK. KOKAL
Designed for the small thread diameter barrel like the small ring 98.
Thread info: .980 diameter by 12 threads per inch. Great to build an Action, from parts you have laying around or acquire cheaply at Gun Shows.
A great chance to save some money because Military 98 Actions can no
longer be imported! While they last .$19.95 ea, or 3 for $44.95 GUN186
*** Also available: Complete Action for the model above: consists of Trigger
guard assemby, bolt assembly and receiver - ready for you to add your barrel
& stock...........................................................$125.00 GUN587
PLEASE NOTE: BATF will no longer allow the import of military 98 Actions! This limited lot, is from
the ‘stash’ we have accumulated through our 50+ years of hoarding.
U.S. WW2 PISTOL LANYARD
Woven cotton OD green lanyard with leather cinch and reinforced
leather end with steel attaching hook.@41 inches long. Very difficult to find originals! New made and used with Model 1911, S&W
Model 10 etc....................................................... $7.95 MISC385
SARCO, INC.
GUN
PAGE
1
PURCHASE A ROCK ISLAND GOVT. MODEL PISTOL
Upgrade to a set of VZ Operator II BLACK/GRAY Grips for $65.00 ZZ2 (same basic look of operator grips, but with golf
ball pattern and thumb groove for the mag release. Grip is notched for ambidextrous safety and mag well)
www.e-sarcoinc.com /
www.sarcoinc.com
610.250.3960 Fax:
610.250.3961
PURCHASE A ROCK ISLAND WIDE BODY PISTOL
Upgrade to a set of VZ Operator II BLACK/GRAY grips for $65.00 ZZ2 (Aggressive golf balling pattern with changes
from top to bottom. A favorite pattern for IDPA or IPSC shooters) Note: While supplies last. May require some fitting
“ROCK” OUT ON THE RANGE THIS SUMMER WITH A NEW ROCK ISLAND!
America’s Fascination with the 1911 .45 goes on. Back to the Basics with a
“good ‘ol .45” at an affordable price.
PLEASE NOTE :ALL PISTOLS Not for Sale
in Massachusetts
(Please Check Local Laws)
ROCK ISLAND ARMORY STANDARD 5” 1911 .45 ACP
High Quality and Great Traditional Appearance
• Beautiful GI Style Parkerized Finish • SPECIAL - 8 Round Magazine with Finger Rest •
1911 A1 Style Sights • Long Milled Grooved Trigger - Consistent 51⁄4 to 51⁄2 Pound Trigger
Pull • Flat Steel Grooved Mainspring Housing
PARTS INTERCHANGABLE WITH U.S. G.I. • All Steel Ordinance Grade 4140 Steel - Made
on Computerized Numerical Control CNC Machines • ISO 9001 COMPLIANT • ALL GUNS
COME IN HARD PLASTIC CASE WITH MANUAL & SHELL CASING
GUN037 - $365.00
(Extra 8 Round Mag. (Blued)
$20.00 – RPM122)
Pre-Paid Orders Add $15.00 for
Shipping or Ask About UPS Overnight
Saver for Faster Delivery
5" Pistol Not CA Legal -
ROCK ISLAND RAIL GUN - TACTICAL 2011
1911 FRAMES
A Real “Slab Side”! Full length, Squared Dust Cover with 1913 Picatinny Rail,
mounted to a full-girth squared slide without lightening cuts. In addition to the
upgrades on the original Tactical model, such as Skeletonized Hammer and
Trigger, Beaver Tail Grip Safety, and Ambi-Thumb Safety, the 2011 Tactical
also adds Tru Dot™ Night Sights as an option.
with Tru Dot Nights Sights
$119.95
GUN012
Build your own custom .45
Manufactured from 4140 Steel on CNC
Machinery. Fully machined. Above frame with our
internal parts kit ($89.95 value) for $184.95 GUN595
$590.00 GUN430
Randy from GunsForSale.com writes that this is a brand new
1911-style autoloader chambered in the new .22 TCM caliber. Rock
Island Armory cartridge designer Fred Craig said the proprietary
.223-based pistol caliber round sends a 40 grain jacketed hollow point
bullet downrange at 2100 feet per second. The goal was to make a
1911-type pistol “with the same weight, but double the firepower and
delivering more foot pounds of energy.”
.22 TCM AND 9MM • 2 DIFFERENT BARRELS • Composite grips • 5
inch barrel
TWO GUNS FOR THE PRICE OF ONE ! $599.95
$569.00 GUN442
.22 TCM 1911 MID SIZE
TCM .22 Midsize standard model
delivers blazing performance using a
.22 caliber bullet that travels over 2,000 fps.
The gun is outfitted with an original Armscor
cartridge creaing excellent muzzle energy and light
recoil making this a truly unique
high-capacity pistol.
17 round capacity $574.95
$559.00 GUN570
$399.00 GUN276
1911 .45 ACP ROCK ISLAND TACTICAL TWO TONE
BLOW
OUT!
MATCH GRADE ROCK ISLAND 1911’S JUST IN!!
The Rock Island Match 1911
.22 TCM AMMO, ARMSCOR
Specs:
Caliber: .22 TCM, Grain Weight: 40
Bullet Type: JHP
1875 Muzzle Velocity
1686 fps Velocity at 50 yards
1511 Velocity at 100 yards
312 ft/lbs Muzzle Energy
252 ft/lbs Energy at 50 yards
203 ft/lbs Energy at 100 yards
ROCK ISLAND TACTICAL 1911 .45
“The Hottest Seller Right Now”
• .45 ACP • Semi Auto • 5” Barrel • 8 Round Magazine Capacity • Combat
Sights - Dovetail • Beavertail Grip Safety
• Skeletonized Hammer & Trigger (Target Grade)
R
• Ambidextrous Thumb Safety • CA Legal $439.99
SUPE T!
OU
BLOW
$459.00 GUN462
O
SARC E!
USIV
EXCL
This is Rock Island Armory’s top of the line
1911. The pistol is hand fit for superior slide
and frame match. Triggers are crisp with
a clean break. The front fiber optic sight
makes acquiring your sight picture effortless. If
you are looking for a great range gun for target shooting
or steel matches for a great price look no further $649.99
$599.00 GUN384
Parkerized finish, Semi auto, 5 inch battle Slide and frame hand
fit, Skeletonized trigger and hammer, 8 round capacity mag, front
sight is a dovetail fiber optic, rear sight is a LAP adjustable, checkered grips, ambidextrous thumb safety, beavertail grip safety.
(this is not for 22.LR firearms)
$25.00/BOX AM144
(50 to a box)
ATTENTION M1 CARBINE FANS:
Own A Piece of History. We just discovered a cache
of German Erma-Werke EM1 .22LR carbines! These
complete rifles resemble M1 Carbines… except that they
are in .22LR caliber and are dovetailed for a .22 scope
mount. The Israeli Military used them as trainers in the
late 60’s and early 70’s.
The condition of these rifles is good with some stock dents and
dings from training, shipping and storage. Bores are excellent
and have many years of life left in them. All Guns come with (1)
15 Round Magazine.
We are also offering some rifles
missing both front and rear
sights at a lower price for those
who wish to mount a scope on
their EM1.
Don’t procrastinate!! These
rifles won’t last long. This is a
rare find!
GUN592 – Erma-Werke EM1
Complete............$295.00
GUN593 – Erma-Werke EM1 without Sights................. $245.00
RM66 - Spare magazines also available............................$59.95
1911 COMPACT TACTICALS 9MM
3.5 inch barrel, Extended beavertail,
Full guide rod, Snag-free combat style
sight, Fully parkerized
9mm $459.99
BLOW
OUT!
9MM PARA (9X19)
9mm Standard G.I. 5" $409.99
$515.00 GUN431
All the GREAT features of our standard Rock Island Tactical
– One o four Best Sellers! But in TWO TONE! Matte black
slide/matte nickel gray finish frame Black checkered grips.
......................................................................... $495.95
9MM ROCKS
$449.00 GUN568
$529.99 without Tru Dot Night Sights
ROCK ISLAND 1911 MICROMAG
22 TCM / 9MM
BLOW
OUT!
OUT
BLOW ST
O
ALM
OST!
C
T
A
BLOW
OUT!
NEED SPARE MAGS? THESE JUST IN!
.22 TCM / 9mm, 17 rd. Magazine - In Stock!.............. $32.99 RPM290
1911 Double Stack .45, 13 rd Magazine - In Stock!..... $24.99 RPM289
12 GA. PASI1 TACTICAL SHOTGUN
THE LATEST SARCO SLEEPER DISCOVERY
This may be the BEST Shotgun
Deal on the market! Proven reliability and affordability in one 12 Ga.
Pump action shotgun holding 4 rds in the tube and one in the
chamber. Barrel is machined from 4140 steel, honed & chrome lined
in similar fashion to premium rifles. Dual action bars are CNC machined
and heat treated, bolt chromed and treated for low luster finish and the overall
finish is black. Additional notable features include an easy point bead front
sight, oversize 2 position cross bolt safety, 18.5" barrel, fixed recoil reducing
stock and smooth operating trigger. All of this jammed into an ‘easy day’ carry
weight of just 8 lbs. Manufactured by ASI, they are known for using only the
highest quality materials! This price is just too good to pass! $179.00 each,
3 for $495.00 GUN571 FFL Dealers call for prices!
THE RENOWNED FULTON ARMS M14 RECEIVER
There’s a reason that we are still using the M14 platform 50
years after its adoption..... IT DELIVERS! Whether you’re a
military contractor heading to Iraq, Afghanistan, Kurdistan,
Somalia or American marksman looking for the basic or
Sniper based Platform, this is a Solid Great Deal. We offer 4
flavors of Semi Auto M14 Receivers precision made utilizing 8620 Alloy steel, precision
geometric CNC processing from Lost Wax Investment Castings & made in the USA!
Properly heat treated & core hardened to Mil Specification. We have 4 flavors of receiver:
A. M14 Semi Auto Receiver, marked U.S. Rifle 7.62mm M14............ $549.95 GUN581
B. M14 Semi Auto Receiver, marked U.S. Rifle 7.62mm M21 (NJ compliant)
....................................................................................................... $549.95 GUN582
C. M14 Semi Auto Receiver, with rear lug/ threaded 1/4-28 for stabilizing receiver bolt,
marked U.S. Rifle 7.62mm M14....................................................... $699.95 GUN583
D. M14 Semi Auto Receiver, with rear lug/ threaded 1/4-28 for stabilizing receiver bolt,
marked U.S. Rifle 7.62mm M21(NJ compliant)................................. $699.95 GUN584
*Always assemble receiver with parts, by a qualified gunsmith who can check head
spacing & fit for safety.
$399.00 GUN341
9mm Tactical $450.00
$399.00 GUN342
These are not for sale in California
BLOW
OUT!
ROCK ISLAND ARMORY 1911A2 2011 VZ
SPECS:
- 2dot adjustable rear sight with tru-glo
high vis. Front sight
- Front and back wide-angled slide serrations
- Full dust cover rail to even the weight
and reduce recoil
BLOW
OUT!
- 13 round mag
- ambidextrous safety
- combat hammer
- extended beavertail for maximum comfort and safety.
- competition style over-sized magwell
$599.00
GUN577
ROCK ISLAND ARMORY 1911 MIDSIZE SPECS:
Chambered in .45acp and outfitted with a shorter barrel, smooth
wood grips and a parkerized finish
1911 Midsize GI. Faithful to the
original 1911 design, the Standard
GI is equipped with a 4.25 inch
barrel, fixed sights, and an 8 round
magazine.
$439.95
GUN038
DON’T FORGET!! ALL OUR ROCK ISLANDS COME
WITH A LIFETIME FACTORY WARRANTEE!
SWEDISH MAUSER /CARL GUSTAV CG-63 MATCH
RIFLE, (CROWN JEWEL) 6.5MM
Specially made in Swedish military arsenals for 300m ‘Match’ shooting. They feature
a heavy, non-stepped barrel, tuned trigger assembly , a stock with Monte-Carlo check
pieces on both sides, a pistol grip, short forend and handguard. Barrels are free
floated and sights are match quality micrometer aperture sights of various makes.
The Swedish equivalent of a U.S. National Match Springfield rifle. They were built in
both Germany and Sweden, and were manufactured with high grade tool steel and
alloyed with vanadium, nickel and copper for superior strength and corrosion resistance. Renown for accuracy in the Swedish Army where it was designated the Gevar
6. Fewer than 40 pcs. available! Had these 12 years ago and they went fast!!
.................................................................................................... $795.00 GUN114
WW2 METAL GERMAN WALL PLAQUES
Reich ‘Eagle Emblems’ were posted in most public buildings and
at permanent military installations. Our new made plaques are
cast in aluminum, polished, and make the perfect decoration for
military displays, reenactments, and wartime static displays for
collectors. Two sizes available:
SMALL REICH PLAQUE- wingtip to wingtip distance 15 inches.... $22.95 MISC371
LARGE REICH PLAQUE- wingtip to wingtip distance 27 inches
....................................................................................................... $49.95 MISC372
GERMAN WW2 BOX STENCILS
Steel box marking stencils reproduced from original Markings on
3rd Reich ordnance boxes. Great for displays and reusable. Sizes
9” x 7”+/- 3 types available:
A. Panzerfaust Klein Launchers........................$14.95 MISC350
B. Mines/ Schutzenmne...................................$14.95 MISC351
C. Panzergrenaten............................................$14.95 MISC352
Or buy all 3 for................................................................................ $35.00 MISC353
SARCO, INC.
BERETTA MODEL
STANDARD 1951
9mm Good condition Was $399.00
NOW $349.00! GUN348
www.e-sarcoinc.com
/ www.sarcoinc.com
E-mail:
[email protected]
610.250.3960 Fax: 610.250.3961
RUGER P85 MKII
Got in just a few. Good-VG
cond… $225.00 GUN395
GUN
PAGE 2
COMPLETE MAUSER, FULLY MACHINED & FORGED, LARGE RING EUROPEAN COMMERCIAL ACTIONS MANUFACTURED BY THE FAMED FIREARMS MAKER DUMOULIN OF ‘BELGIUM’
Building your own Sniper, Target, or Varmint rifle has never been so enticing! Sarco worked for over a year to bring you this colossal opportunity to own a brand new, complete Dumoulin
Mauser action at the best price on the world market!!!!! Let’s get to the objective specs, on what this means for you:
RECEIVER: This is an A-2 steel, forged / heat treated body which
has been checked and gauged after each machining operation
ensuring precision with strict tolerances and ultimately, superb
mating with attached parts and adherence to Engineer drawings.
BOLT: A-2 Steel, one piece bolt ,handle & knob with checkered
flat on underside. The extractor is the traditional proven, ‘claw
type’ extractor. Bolt Head diameter is set for the .30-06 family
of cartridges.
(A2 Chromium/molybdenum/vanadium is tool steel).
RECEIVER SPECIAL FEATURES: Flats with threaded holes and
dovetails, permit the use of a variety of rings and bases. This
feature eliminates the need for screwed on bases. Each flat is
predrilled and threaded for standard 6-48 screws in 2 places.
Flat tops are parallel and at the same level. These Actions have
been engineered from original FN Belgian blue prints.
TRIGGER MECHANISM: The trigger is fully adjustable for sear
engagement, over travel, and creep. The trigger body is made
of steel.
TRIGGER GUARD: This trigger guard is fully machined from a
steel forging and has a hinged FN/ Ruger style floorplate and
latch. Believe it or not, I priced a similar trigger guard at the
Shotshow from a German supplier and they wanted $800 for
the guard. The Action capacity is 5 rds. of .30-06 length ammo.
FINISH: These Actions and Guards are blued. Some have bright bolts.
RECEIVER THREADS: Threads are standard 1.10 x 12 TPI.
PTR91 G3 RECEIVER
This US MADE receiver will work
on your G3, HK91, PTR91 and
CETME builds. Manufactured by
PTR91 in Farmington Connecticut on HK factory tooling
and equipment to exact HK specifications. Just like
when building a house, the foundation must be strong
and to exact measurements; this receiver will do the
same for your build. Nothing but the very best in the
market - that is the PTR91 receiver. Do not confuse this
receiver with out of specs, cheaper receivers in the market. Start on the right foot and you will be proud of your
finished product, further more, your build will have a
higher re-sale value than any other build that has a less
desirable receiver. No matter how you look at it, starting
with this receiver is a “ win win situation”. Get them
while supplies last!!! $239.95 GUN445 Note: Receivers not sold together with kits.
GUN ORDERING INFORMATION
•C
all our Ordering department, (610) 250-3960,
Monday – Friday 8:30 to 5:00. All guns can only
be shipped to FFL Dealers. All firearms laws apply.
Please review your local & federal laws. Please
Note: All firearms, frames & receivers should be
checked or assemble by a competent gunsmith
before firing.Include daytime phone number with
your order.
• Guns can be ordered via credit card (Visa or MasterCard only), check, or money order.
• Sorry we do not do COD’s.
A Note On Shipping Costs: (approximate)
Rifles: O
ne rifle averages $15.00 to $20.00
+ insurance
3 rifles average $22.00 to $35.00 +
insurance
Pistols: v
ia USPS - 1 pistol averages $20.00 to
$25.00 + insurance
via USPS - 3 pistols averages $35.00
+ insurance
via UPS - 1 pistol averages $25.00 to
$50.00
+ insurance
via UPS - 3 pistols average $70.00 to
$80.00
+ insurance
Pistols to California (UPS only) about $55.00 to
$60.00 + insurance
Hawaii & Alaska - via USPS - Pistols $25.00 - via
UPS Red - $90.00
UPS Rifles - 1 rifle $45.00 to $50.00,
3 rifles $90.00 - $95.00
Pennsylvania residence please add 6% sales tax
All charges are charged at actual cost of shipping
& handling. Above information is for your reference
and reasonably accurate. For orders with check
or money orders, include sufficient shipping - low
range is East Coast and high range is West Coast.
All guns can only be shipped to FFL Dealers or C&R
Collectors for C&R guns. All firearm laws apply.
Please review your local & federal laws. Massachusetts no pistol or pistol frame sales. California Pistol
must be on approved list.
In accordance with California state law, pistols can no longer
be shipped to California by means of the US Postal Service. All
pistols will need to go UPS Overnight or Overnight Saver.
Due to US Postal Service regulations, pistols, revolvers, and
other firearms capable of being concealed on the person are NOT
PERMITTED to be mailed unless they are mailed to a manufacturer or dealer. C&R license holders are not dealers and therefore cannot receive these firearms through the US Postal Service.
C&R license holders that wish to purchase pistols, revolvers,
and other firearms capable of being concealed on the person will
have to have them shipped via UPS Overnight. PLEASE NOTE
THAT SHIPPING CHARGES ARE NOT REFUNDABLE IF YOU
ARE NOT SATISFIED WITH YOUR PURCHASE. Please Note:
Prices in our ads are those for shipments to FFL dealers – You
may have your choice shipped to your dealer. Some may vary
from prices in our showroom due to additional over head and
processing costs.
BOLT-SPECIAL FEATURES: Strength of the forged bolt exceeds that
of bolts in normal production. The specially designed bolt
sleeve is an FN type and incorporates a Winchester style side
swing 3 position blocking safety. This type of safety allows the
use of a single or double set trigger in complete safety and
preventing a discharge. Currently a similar bolt sleeve sells for
$150.00-$250.00 separately.
WHY PURCHASE THIS ACTION? To our knowledge, no one in the
world presently makes a fully machined ‘98 Mauser action.
Cost would be prohibitive! Just the value of the bolt assembly
& trigger guard equate to more than our cost of the action. This
may be your last chance to buy a fully milled ‘98 Mauser Action! *We know of no fully milled actions being produced in the
world. These were produced many years ago and we bought the
entire lot for posterity. These are the same actions Dumoulin
uses to build their $10,000. rifles!
WHAT DO THE PROS SAY? - We gave some of these actions to one
of the best barrel manufacturers in the U.S. , a Custom Rifle
Mnfr., and an exceptionally talented gunsmith who prepares
gunsmithing school courses, to see what they thought. They
praised these actions and commented that, according to normal gunsmithing practices, the following should be observed
where building a rifle:
1. Lap the bolt lugs & receiver locking recesses for full contact
and improved accuracy.
2. Face off and true the front of the receiver.
3. Shape the feed ramp.
4. Checking the bolt face to make sure it is square & true.
5. Like any other high end firearm, these actions require your
final hand fitting and tuning. These are not operations that
a machine can do and are best left to the assembler.
NOTE: The hardness of the receiver & bolt were checked and
are at RC47/48. (Optimal!)
HERE’S THE DEAL: We would NOT be embarassed to offer these
actions at $595., but we will pass our lucky buy onto you at
the fabulous price of only $349.95 GUN567 as an introductory price. Price may go up later if we find we are too generous!
DUMOULIN BARRELS TOO!
We lucked out and purchased some barrels that were specifically made for these Dumoulin Mauser actions. They are
threaded to the standard Mauser dimensions of 1.10 x 12
threads per inch. We can offer the following caliber barrels:
.270 Winchester............................................. $74.95 MSR602
.30-06........................................................... $74.95 MSR601
Note: these barrels were purposely made with a .010" oversize
thread OD for the tighter fit & more accuracy. They screw on
just fine with proper barrel installation equipment. The shank
length is .003" longer than receiver depth from front of receiver
collar which is the proper thread crush for barrel seating. We
also stock Dumoulin parts-See our 10th ad or visit our website!
DINOSAUR SALE!
FOR INQUIRIES ON WHERE TO GET SCOPE RINGS, PLEASE CONTACT:
Andy Huebschmann, President
Sunny Hill Enterprises, Inc.
[email protected]
(920) 898-4707
We have struck a special
deal with ER SHAW, INC. for
their barrels and gunsmithing services. We will include
a flyer with the speical prices
with each Dumoulin action.
Note: This offer is between
the customer and ER SHAW,
INC. Please contact them
regarding work to be done.
We will not ship actions to
ER SHAW, INC.
Go to www.dumoulin-herstal.com for more information
ROCKOLA M1 CARBINE RECEIVERS
We have a few detachable magazine C96 frames.
This Mauser model is Model 1932 (Fed Ord calls it model 713
on the frame). These frames are new production of 30 years
ago. Frames marked Fed. Ord. Frame only
............................................................... $495.00 GUN366
These frames will accept a standard C96 barrel and extension
with slight modification to feed lips (Thanks Tom). Build your own 20rd
detachable mag semi Schnellfeuer. Takes standard Mauser 20rd or 10rd
mag – Mag not included.
New production milled from 8620 billet stock. Exact current
production of the G.I. Rockola Contract gun. Minute attention to
original detail by a compulsive “get it right” manufacturer. Special
Introductory Price!! $299.00, 3 for $874.95 GUN535
Currently out of production. Only a few left!
ENFIELD COLLECTOR FIND!!!
ENFIELD #1 MK3 WIRE BOUND GRENADE LAUNCHING RIFLE
Sarco has a few original Lee Enfield #1 MK3 Rifles that were purposefully wire bound for use with firing
rifle grenades. because the pressures and duress on the rifle exceeded the pounding it took from firing the .303 cartridge by up to 3 times the pressure, the
Ordnance Corps issued directives for wire wrapping the rifle mid-section for the purpose of retaining the hand guards and preventing them from splintering. The pressure, which
also equated to dropping the rifle from about 12-14 feet on its butt end, gives one consideration for the stresses the rifle had to contend with. Now’s great chance to obtain one of these rare rifles.
Rifle only, in good condition........................................................................................................................................................................................................................................ $295.00 GUN575
PARA ORDNANCE FRAMES
10 types of PARA / 1911 style Frames, completely machined and ready for assembly
with your parts! Part of our ongoing program to bring you one of the hottest model 1911
type ‘builds’ on the market. We’ve got Single Stack, Double
Stack, Pro Custom, and even some Black Ops models with light
rails and more. Many of these are in very short supply so move
quickly to get the ones you want. Those in short supply have a
part # followed by asterisks****. When these are gone… they are
gone for good so act fast…….
PARA EXECUTIVE CARRY- Single action w/ bobtail full sized
grip and short dust cover for 3" slide. Frame #LG 3" w/anodized
finish. Aluminum frame, single stack. Normally retails $214,
Sarco’s price........................................... $150.00 GPARA708
PARA BLACK OPS 1445 - double stack single action w/light
rail. Frame#644 w/Ionbond finish. For 5" slide and standard
14rd double stack magazine. Normally retails at $313. Sarco’s
price....................................................... $200.00 GPARA025
REBEL ARMS
Please check our website for our Rebel Arms program.
MORE GOOD OLE’ DAYS!!
We were fortunate to acquire a small quantity of these rare commercial Colts
that came from a police department in Argentina. This is the 1933 Colt commercial police contract and we don’t know that any of these have ever come to
the U.S. before. Here’s your chance to fill that void in your collection or just get
a good used .45 shooter.
BALLESTER MOLINA
As an improvement to the 1911 A1 pattern Argentina produced the Ballester
Molina. Changes were made in the hammer strut, firing pin stop, safety lock,
mainspring housing & trigger. Designed and built by the Argentine Co. Hispano
Argentina Fabricade Automobiles (HAFDASA). These were marketed as an affordable alternative to the Colt 1927 Systema. These haven’t been available for
many, many years.
• An interesting variation for your .45 1911 collection or as an affordable shooter
• Grips replaced with new or excellent proper Ballester Molina grips
• Magazines are replaced with new magazines for functionality
• For safety sake, we have replaced all recoil springs and firing pin springs
GUN511 Best grade gun – selected for marking condition.............................................................................................$399.00
GUN512 Medium grade with markings worn................................................................................................................$349.00
GUN513 Very worn markings.......................................................................................................................................$299.00
We have about 5 Ballester Rigauds in the pile. If you want one, please contact Mike Wilm
We have consecutive numbers in all variations! Original Colt up to 3 - Ballester Molina up to 9 - M1927 up to 6. Cost for consecutive #’s will be $200.00 extra – not too many available.
NOTE: All of these Argentine guns are C&R eligible. However if shipped to a C&R they must be sent via UPSD overnight.
Some of Juan Perone’s personal guard guns still available call Mike Wilm.
We have very few guns left in Colt and Ballester that have a dark arsenal refinish—call Mike Wilm.
C&R
1. PARA EXPERT 1911 – for 5" non-ramped barrel, sometimes referred to as ‘GI Expert Model’. Single action and takes
standard 7-8 round magazine, no ramp, carbon steel, clear
nitride finish. Frame #660
....................................... $125.00 GPARA000
2. PARA ELITE 1911 – for 5" ramped barrel.
Frame #630 w/Ionbond finish. Originally used
1.
with Elite Target model and can be cut down
for the Elite Commander. Stainless steel, single
action with Ionbond finish. Accepts standard
2.
7-8 rd. .45 mag. Normally retails $254.00,
Sarco’s price
................................. $150.00**** GPARA023
3. PARA 1911 ELITE OFFICER – For 3.5"
3.
ramp barrel cut. Single stack, single action,
stainless steel. Accepts standard 6-7 rd. mag.
Frame #645 w/Ionbond finish. Normally retails
4.
$264.00, Sarco’s price
....................................... $160.00 GPARA635
4. PARA WARTHOG P10 – For 3" ramped
5.
barrel. Frame #018, alloy w/ anodized finish.
Double stack, single action and accepts 10 rd.
.45 mag. Normally retails $240.00, Sarco’s price
....................................... $150.00 GPARA650
6.
5. PARA 1911 – for 5" ramped barrel, checkered front strap. Can be used for Elite Pro & Pro
Comps 9 & 40. Single action, single stack and
accepts standard 7-8 rd. 1911 mag. Frame#
7.
830 in Ionbond finish. Normally retails $260.00,
Sarco’s price
....................................... $140.00 GPARA672
6. PARA PRO CUSTOM – double stack, single 8.
action w/checkered front strap, used in 18rd.
9mm, 14 rd .45, 16 rd. 40 S&W. Primarily for 5" ramped
barrel. In the white, no finish. Frame #103. Normal retail
$280.00, Sarco’s price is
............................................................. $175.00 GPARA009
7. PARA BLACK OPS 1911 – 1911 w/ light rail, primarily
for 5" ramped barrel, single action, single stack, In the white, no
finish. Takes standard 7-8 rd mag. Frame #730. Also for Elite
Hunter model. Normally retails $181.00, Sarco’s price
............................................................... $165.00 GPARA016
8. PARA ELITE 1911 – for 5" ramped barrel. Single stack,
steel. Can be used for Elite or Elite Target models. Can also be
cut down for Elite Commander 4.25" model. Stainless steel in
Flat Dark Earth finish. Single action and accepts standard 7-8
rd .45 mag. Frame #630. Normally retails $254.00, Sarco’s
price is
............................................................. $125.00 GPARA856
Note - where designated as ‘ramped barrel’, it refers to
the common ‘Clark©’ style ramped barrel.
SPANISH
CETME (L)INC.
PARTS SET, 5.56 NATO
SARCO,
SARCO, INC.
ing, and shooting made this platform superior
to the G-3 styled rifles and it’s truly ergonomic
design made it a world class combat rifle. We
like the fact that it is very much a ‘minimalist’
component oriented rifle with fewer parts to
manage than an FAL or G3. This year is the first
year ever that we have been able to obtain these
extremely rare gun kits. We plan to offer barrels
and receivers as we bring this program along,
but take heed that at the moment, we have a
very limited supply of the kits so don’t suffer in
the long run from buyers ‘remorse’ when they
are gone! Act now to secure one!
Original Spanish Army assault rifle parts set
as issued between 1984 to 1999. A cross over
rifle platform developed from the CETME (C)
model taking some inspiration from the FNC
design which competed for Nato trials around
the same time. Like the FNC, the CETME C also
would accept M-16 magazines and the 5.56 Nato
round. Moreover, the comfort of holding, aim-
RPG-75 SHOULDER FIRED
ROCKET LAUNCHER
Watch the news and you will probably see the
RPG75 being used in combat by both sides
in the Syrian conflict! This 2 foot long inert
training RPG-75, opens and extends to 35"
long, when ready for fire. Very similar to the
U.S. M72 LAW Rocket Launcher, this Czech
made rocket launcher weighs 7lbs and comes
with shoulder strap and flip up sights. This is
the same RPG you will see in many hotspots
around the world, especially in various Bush
Wars in Africa, by SWAPO units in Angola,
and the Near East............... $199.95 RL010
Parts set comes with all parts shown. The kit
may be missing a spring and detent from the
rear sight and the windage screw tip may be
missing. The kit does not come with a barrel or
receiver, but we do include 2-30 rd. magazines
RUSSIAN RPG-7
TRAINING ROCKET
Original Russian RPG-7 inert training rockets
made primarily of aluminum with heavy duty rubberized warhead with fuse and Russian safety tag
& clip. Booster comes in its own waxed storage
tube just like the original and there is a bakelite
‘screw on’ safety cap, screwed onto the main
rocket motor. Supremely realistic and perfect for
display or use as an action prop. Weight is 5 lbs,
length of assembled rocket is 36". These were
stored well and show hardly any signs of use.
Best we’ve seen on the market!...$124.95 RL011
“SHOE MINES”
were a very unfortunate German
invention as they were positioned
where you least expected them.
Hard to locate with metal detectors, they were
most often used as booby traps in houses, especially under floor boards or stairs. Many an allied
soldier lost a limb or life because of these. Made
like the original box, this dovetailed mine comes
w/o explosive or fuse. Markings will vary. Perfect
for militaria collections.............. $18.95 MISC309
NEW
ITEM
!
We have a small number
of replica M3 Grease
Guns that are made of
metal! Really, the only full size & best reproduction on the market, and it shoots Airsoft
6mm BBs. Comes with magazine and stock.
Sorry, no flash hiders available at this time.
Also comes with rechargeable battery
and charger. Looks
Very Realistic!!!
Check local laws
in your area
before ordering $370.00 REP25
Good condition CETME L Parts Set
............................................. $224.99 CET021
Very Good condition CETME L Parts Set
............................................. $247.00 CET022
M11A3 WWII DUMMY RIFLE GRENADE
Rare! Lost in the warehouse for 10 years! Repainted and may
have minor storage dings on fins. These don't exist anymore $34.95 AM125 *Please
note: No dummy grenades to California.
WWII GERMAN PANZERFAUST INSTRUCTIONS
We have accurately copied the original issue instructions provided to the soldier
when issued the Panzerfaust 60 Launchers.....................................$5.00 SB170
U.S. 2.36" BAZOOKA SIGHTS AVAILABLE! See our website!
GERMAN WWII PANZERFAUST 60 ROCKET
GERMAN WWII SCHUTZENMINE
M3 GREASE GUN
with each kit. The trunnion does
come with the kit. These kits have
the Spanish Army green colored
finish although parts are used and
furniture may have some cosmetic
blemishes, but are serviceable.
The parts are actually quite rugged
and they had to be, as the system
of firing was by delayed blowback
with a bolt traveling on 2 rollers for
both acceleration to forward firing
and ‘delay to extract’ , by compensating for pressure release. Firing
rate for this rifle was between 600
- 750 rds per minute which made it
faster than the G3 and equal to and greater than
the firing rate of the AK-74!
Sarco is pleased to offer these kits in two
grades:
M3 GREASE GUN POUCHES
Faithfully reproduced from original 3 cell USGI
magazine pouches used from WW2 thru Vietnam.
Features ‘lift the dot’ snaps and nomenclature
markings on the back. These are made with the
same tight canvas weave as were issued to U.S.
troops. Always hard to find. One pouch...$16.95
or Pair of pouches for................... $27.95 GG056
GERMAN WWII PANZERFAUST 60 LAUNCHER & ROCKET
All steel construction, this full size inert
display launcher is complete with rocket
assembly. Used extensively in WWII, especially against U.S. tanks in France and
Germany......................................................................... $180.00 RL002
NEW!
ITEM
PANZERFAUST KLEIN ROCKET
Full size steel inert rocket with spring loaded
fins as used on the first German Panzerfaust
of WWII...................................$60.0 RL004
RPG 2 ROCKET (INERT)
Sarco has a new batch of RPG2 rockets that
have original military fin and body sections
with a new made inert projectile head. Perfect
for completing your display RPG2 or even for use on RPG7s as it has a similar tapered
projectile head................................................. $100.00 ea, 3 for $270.00 RL005
NEW AMMO FOR A NEW YEAR!
38 SUPER: AM148
FMJ, 124 GR., (ARMSCOR) 100 rds
..................................................$34.95
OR 1000 rds............................ $299.50
.45 ACP: AM153
230 gr, full metal jacket. 50 rds/box
..................................................$19.95
OR 100 rds.................................$34.95
9mm LUGER: AM147
Ball ,FMJ,124 gr. (ARMSCOR) 100 rds
..................................................$29.95
OR 1000 rds............................ $249.50
300 BLACKOUT: AM156
147 gr, full metal jacket. 20 rds/box
..................................................$17.50
OR 100 rds.................................$84.50
.22 Long Rifle High
Velocity: AM154
Lead H.P., (ARMSCOR) 36 gr. 500 rds
(brick)......................................... $49.00
ALSO...
.30 CARBINE: AM149
FMJ, 110 gr., (ARMSCOR) 100 rds
..................................................$39.95
OR 1000 rds
............................................... $349.50
.22 cal Magnum 40gr JHP: AM155
500 rds (brick).......................... $150.00
.223 FMJ, 55 gr
(ARMSCOR) AM157
100 rds....................................... $34.95
OR 1000 rds............................. $335.00
.50 CAL. BALL AMMUNITION
Big blasting
action! .50 cal.
Ball ammo that
has been loaded
& reassembled
by one of the
most respected
reloaders in the
business! We love
their ammo for
reliability and
cost. We sell this
by the .50 cal. Ammo can with 150 rds. In Stock!.
$397.00 AM158
300 Blackout
Or perhaps we
should call this
the Dien Bien
Phu’zooka’! After
WW2, the French
army rebuilt itself
with many U.S. Sarco bought this French Army
arms, but they
surplus 25 years ago and they
excelled with
got lost in the warehouse.
some of their own,
like the MAT49 SMG and the LRAC-50 Bazooka.
This rocket launcher fired a 73mm round and was
used in such places as the French Indochina War,
Algerian War, and could be found at most quiet
Foreign Legion outposts like Tahiti and Djibouti.
Nevertheless as armor vehicles improved, the
LRAC was slowly replaced by the U.S. 3.5" “Super
Bazooka”, and others in the 1960s. Our deactivated rocket launcher is original, has a hole equal to
the bore diameter drilled in it and a welded piece
installed in the chamber per BATF rules. This
unit has a pistol grip installed, sling, blast shield
with glass inserts and optical elbow telescope.
To our knowledge, this is the first time they have
been offered and quantities are very limited so
you should act quickly to make sure you get one!
Be one of the first 5 people to order and we will
provide you with a free original Technical Manual
from France. Deactivated LRAC-50 Bazooka
................................................. $495.00 RL006
AMMUNITION ORDERING INFORMATION:
We need a copy of FFL or Drivers license for proof of age
(over21) and a signed statement “There are no federal state
or local laws prohibiting me from purchasing ammunition.
I am over the age of 21. I am not a convicted felon, chemically dependent or convicted of a misdemeanor crime of
domestic abuse.” Ammo cannot ship to a PO box.
Illinois residents must include a copy of there FOID
Washington State. Must send a copy of their License to
sell Ammunition
No ammo sales to the following areas:
New York City, New Jersey
Massachusetts have to be licensed by the state
Cook County Illinois (Chicago)
Annapolis and Montgomery county Maryland, Cincinnati
Ohio
No tracer ammo to California
Sorry no Ammo sales to Connecticut at this time.
Washington DC
Alaska or Hawaii
Los Angeles, San Francisco, Napa, Oakland and Orange
County, no ammo sales
.45 Long Colt
.45 ACP
Phones Open: Mon - Fri, 8:30am – 5:00pm
www.e-sarcoinc.com / www.sarcoinc.com
610.250.3960 Fax: 610.250.3961
Faithful copy of the anti-tank manual showing
how to use German issued anti-tank launchers.
Lots of pictures and interestingly, charts at the
back on how to destroy the lend lease tanks
from England and the U.S. that might be found
in the war with Russia like the Valentine, Sherman, Churchhill, Gen. Lee, T34, Matilda, tanks
etc. Panzerschreck and Panzerfausts are also
covered in this WWII manual. In Finnish w/
picts........................................... $7.00 SB169
FRENCH LRAC-50
73MM BAZOOKA
Full size steel reproduction of the venerable shoulder
fired rocket that did tremendous damage to our allied
tanks during WWII. Inert!..................... $75.00 RL003
.45 LONG COLT: AM152
255 gr, lead cowboy loads. 50 rds/box
..................................................$34.99
OR 100 rds.................................$59.95
WWII FINNISH ARMY
ANTI-TANK MANUAL
Showroom Open: Monday - Saturday, 10:00am – 5:00pm,
Friday til 8:00pm
50
Years!
J3

SARCO, INC.

Transcription

Similar documents

Jeff K.`s `M1917 Enfield`

Gun Mart - December Issue - Perazzi Review

SCI-Central Washington Chapter Rifle Raffle

R93 LRS2 Brochure

huge estate - Valek Auctions

Remington 700 Rebuild

Just another over and under? No!

AR Dope Bag Oct. 2001

Page 1 of 1 - Weaponeer.net

May 6_Briarwood