Disc Brake Conversion for 5200 thru 6000 LB

Transcription

Disc Brake Conversion for 5200 thru 6000 LB
Announces the release of our New Trailer Disc Brake Conversion kits
Disc Brake Conversion for 5200 thru 6000 LB
Axles, 1, 2 or 3 axle trailers
Easy Bolt-On Disc Brake Conversion Kit for most all types of Trailers
Features Integral (One Piece) Hub & Rotor:
The rotor and hub are cast as a single unit. Wheel studs are pressed into the
rotor. Bearing races are furnished. Seals and Bearings available separately.
• Hub and rotor are machined together. This minimizes rotor run-out.
• Hub and rotor are balanced as one unit, which offers a smoother ride.
• Ease of installation when retrofitting and / or upgrading from drum brakes.
• Easy Bolt-On disk conversion, complete with instructions.
• Complete kit includes: Rotors, Calipers, Pads, and Indexed Caliper Brackets,
Hydraulic Pump Unit, Steel Line Kit, Instructions and Hardware. Requires
optional Prodigy brake controller or work on new 2007 Ford EOM controllers.
• Fits most all newer model Dexter, AL-KO and Quality Trailer Products Axles.
Heavier rated axle kits also available-Contact us directly for more details.
Rotor Size
& Style
Bolt
Pattern
Brake
Flange
Fits
Spindle
Fits
Axle
12”
Integral
6 on
5.5”
1/2”
Bolts
5 Bolt
#42
All
Fits
Wheel
Size
15” &
Larger
Grease
or Oil
Grease
Lubed
Bearings and Seals are NOT included with Integral brake sets. (Kit does contain
4 Caliper Mounting Bolts with Thread Locker). Automotive quality OEM cast iron
rotors are 100% tested and balanced to meet very strict specifications. Our rotors
are vented to improve heat dissipation. All gray iron rotors are 35,000 PSI tensile
strength castings for longer rotor life, improved structural integrity and superior
performance. Gas Slotting is available optionally.
Bearings and Seals are NOT included with Integral Rotors; You can reuse
your bearings and seals or purchase new bearings and seals.
(Two Axle 5200-6000 pound axle conversion shown)
ROTOR/HUB-12
12” Rotor/Hub 6 on 5 1/2” Lug Pattern
Standard Automotive Finish
Fits 6x5.5 wheel bolt pattern;
½ “wheel bolts; 25520 and 15245 bearing cups
(Rotor weight 28 pounds)
Two axle kit price starts at $1599.00
See link for more details.
http://www.circletracksupply.com/product.php?productid=98&cat=74&page=2
704-871-0721 800-468-2279
304 Fifth Creek Road, Statesville, NC. 28625 p/n. 2/HRCM-12 Rev. 3/07