BUBBLING COLA ANTI-ACNE TREATMENT

CSW-3009-2/2011
BUBBLING COLA ANTI-ACNE TREATMENT
The dielectric function of Fiflow® reduces stinging or discomfort of irritated acne skin. Fiflow® BB61 carries up to 10 times more
gasses than water or oils do. The higher level of oxygen delivered by Fiflow acts as a messenger for faster skin healing. Siltext®
brings softness and richness to the application, while the Hydrasoft® materials provide for a moisturizing, fresh,
non-tacky application. Cola allows a fun and young marketing approach for the product.
phase a
Siltext® Iridescent1 (Glyceryl Polyacrylate (and) Dimethicone (and) Hydrogenated Polyisobutene
(and) preservative system*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.00%
Hydrasoft® Sea1 (Water (and) Algae Extract (and) Natto Gum (and) Citric Acid (and) preservative system*) . . . . . . . . . . . . . . . . . .30.00%
Hydrasoft® Cushion1 (Glyceryl Polymethacrylate (and) Butylene Glycol (and) Zea Mays (Corn)
Starch (and) Chlorphenesin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.00%
Hydrasoft® Moist1 (Glyceryl Polymethacrylate (and) Propylene Glycol (and) Chlorphenesin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.00%
phase b
Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QS
Chlorphenesin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.20%
Dissolvine® NA2-S1 (Disodium EDTA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.05%
Glyceryl Laurate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.60%
TEA-Lauryl Sulfate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.92%
Decyl Glucoside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.73%
Disodium Laureth Sulfosuccinate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25%
phase c
Hyaluronic Acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.02%
Creasoluble® Nº11 (PPG-26-Buteth-26 (and) PEG-40 Hydrogenated Castor Oil (and) Water) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.60%
Cola (Water (and) Glucose (and) Caramel (and) Phosphoric Acid (and) “natural flavorings”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.00%
phase d
Fiflow® BB611 (Perfluorohexane (and) Perfluorodecalin (and) Pentafluoropropane) .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.50%
*Note: Use sufficient preservative system; we do not guarantee microbiological stability.
SUPPLIERS
1
Coast Southwest, Inc.
INSTRUCTIONS
Phase A – Mix Phase A ingredients. No heating necessary.
Phase B – Mix Phase B ingredients and heat up to 70ºC - 75ºC until homogenous. Cool down phase B to below 40 ºC
and add Phase B into Phase A. Homogenize (6,000 rpm) for 3 – 5 minutes.
Phase C and Phase D – Add Phase C and Phase D into the mixture (A+B) and homogenize for maximum 1 minute.
Before adding Phases C and D, make sure the temperature of the mixture is below 35 ºC. Keep stirring the mixture
until homogeneous.
DISCLAIMER: Seller makes no warranty of any kind, express or implied, concerning the
use of this product in any application. User assumes all risk of use, storage, or handling,
whether in accordance with directions or not.
RE V ISIO N DATE : 0 9/ 0 5 / 2 0 1 2
1-800-621-0500 | coastsouthwest.com