Surfactants, Emulsifiers and Gelling Agents range www.infinity-ingredients.co.uk
Transcription
Surfactants, Emulsifiers and Gelling Agents range www.infinity-ingredients.co.uk
Surfactants, Emulsifiers and Gelling Agents range www.infinity-ingredients.co.uk Surfactants, Emulsifiers and Gelling Agents Surfactants, co-surfactants, emulsifiers, coemulsifiers and gelling agents are used in almost all cosmetic products. The selection of these ingredients very much depends on whether the formulation is natural/organic or synthetic, the performance required and product category. We at Infinity Ingredients are pleased to summarise the materials we have for this product category below. www.infinity-ingredients.co.uk Surfactants & Co-Surfactants Dermosoft® decalact liquid (INCI: Sodium Caproyl/Lauroyl Lactylate; Triethylcitrate) is a low viscous convenience blend based on Dermosoft® decalact for easy handling with analogous antimicrobial properties. Recommended use level: 0.7 – 1.2% Dermofeel® G 10 DI (INCI: Polyglyceryl-10 Diisostearate) is a non-ionic surfactant made from natural raw materials. Recommended use level: 1 – 10% Dermofeel® G 5 DO (INCI: Polyglyceryl-5 Dioleate) is a non-ionic surfactant made from natural raw materials. Recommended use level: 1 – 10% Dermofeel® G 5 L (INCI: Polyglyceryl-5 Laurate) is a coemulsifier made from natural raw materials with excellent cosmetic properties. Due to its excellent good eye and skin compatibility, its pleasant skin-feel and outstanding detergence, Dermofeel® G 5 L can be used for baby care products and facial cleansing, as well as a solubiliser for alcohol-free solutions (i.e. perfumes), and for natural bath oils. Recommended use level: 1 – 2% Dermofeel G 5 O ® (INCI: Polyglyceryl-5 Oleate) is a non-ionic surfactant made from natural raw materials. Recommended use level: 1 – 6% Dermofeel® G 6 CY (INCI: Polyglyceryl-6 Caprylate) is a multipurpose, non-ionic surfactant. It is an excellent oil solubiliser with good wetting properties. Made from renewable raw materials, it is used as food additive and is fully bio-degradable. Recommended use level: 1 – 3% www.infinity-ingredients.co.uk Dermofeel® G 10 LW (INCI: Polyglyceryl-10 Laurate, Aqua) is a co-emulsifier made from natural raw materials with excellent cosmetic properties in form of a 50% watery solution. Due to its excellent eye and skin compatibility, its pleasant skinfeel and outstanding detergence, Dermofeel® G 10 LW can be used for baby care products and face cleansing, as well as an emulsifier for low-viscosity O/W-emulsions and roll-on emulsions. Recommended use level: 1 – 2% Dermosoft® GMC (INCI: Glyceryl Caprate) is a multi-functional cosmetic raw material that acts as fatting, wetting, moisturising, and co-emulsifying agent. It is very skin friendly and effective for the biological stabilisation against yeast and bacteria. It can be incorporated into the either the oil- or water-phase. Recommended use level: 0.5 – 1% Dermosoft® GMCY (INCI: Glyceryl Caprylate) is a skin friendly multi-functional cosmetic raw material which acts as a fatting, wetting, moisturising, and co-emulsifying agent. Also it is effective for biological stabilisation against yeast and bacteria and can be incorporated into the oilor water-phase. Why not try this material in a PEG-free self-emulsifying bath oil? Recommended use level: 0.3 – 1% Dermosoft® Octiol (INCI: Caprylyl Glycol) is a multi-functional additive which can be used as a viscosity regulating and wetting agent. Its compatibility with many cosmetic ingredients and its pHindependent broad efficacy against germs allow for the use in rinse-off-products and emulsions. Recommended use level: 0.3 – 1% Dermosoft® SLL (INCI: Sodium Lauroyl Lactylate) is a coemulsifier and foam stabilisation agent which is useful for a wide range of cosmetics. Due to its antimicrobial activity, it also acts as a deodorant ingredient. An example of use is the treatment of Dandruff (Seborrhoeic dermatitis). Recommended use level: 0.5 – 0.8% Emulmetik™ (INCI: Lecithin/ Hydrogenated Lecithin) are natural Lecithins and Phospholipids with various Phosphatidylcholine contents. Used as co-emulsifiers, wetting agents or active ingredients, they improve all types of formulation with a unique sensorial and natural approach. Emulmetik™ 320 increases the longevity of fragrance and enables the fragrance level to be reduced (good for allergens). See the Lucas Meyer ‘Emulsion de Parfum’ concept that shows enhanced fragrance longevity (even after washing). EmulmetikTM is naturally compliant (if using essential oils) and provides an ultra-light texture. Emulmetik™ 930 is best for wipes, make-up removal and the reduction of pore size. Recommended use level: 0.25 - 15% www.infinity-ingredients.co.uk Symbio®solv XC (INCI: Caprylyl/Capryl Wheat Bran/Straw Glycosides, Aqua, Fusel Wheat Bran/Straw Glycosides, Polyglyceryl-5 Oleate, Sodium Cocoyl Glutamate, Glyceryl Caprylate) consists of a mixture of surfactants and wetting agents that are all naturally derived and show excellent performance for solubilisation. It can be employed in a variety of cosmetic products. It yields transparent solutions of most perfume oils and essential oils in aqueous formulations, making it invaluable for tonics and oral care products. Symbio®solv XC does not contain any alkoxylated species. Therefore it is PEG and PPG-free. In comparison to the industry’s gold standard (PEG-40 Hydrogenated Castor Oil) Symbio®solv XC showed a superior performance. Recommended use level: 1 – 3% Emulsifiers & Co-Emulsifiers O/W HLB values are the stoichiometric value and relationship between the lipophilic and hydrophilic parts. In summary: HLB 3 – 8 = W/O HLB 8 -15 = O/W HLB 11 – 15 = light skin feel HLB > 15 = solubilisers and co-emulsifiers such as G10L and G10 LW Amisol™ Soft (INCI: Behenyl Alcohol (and) Glyceryl Stearate (and) Lecithin (and) Glycine Soja (Soybean) Sterols) is an optimised blend of Phospholipids, Phytosterols and vegetable Lipids which forms lamellar O/W emulsions for soft applications. This Biomimetic structure is particularly suitable for sensitive or stressed skins. Amisol™ Soft maintains the protective function of the Stratum corneum, reduces TEWL and optimises hydration. Ideal for sensitive skin, baby, suncare and makeup applications. Recommended use level: 3 - 6% Amylomer® EMU PF INCI: Aqua, Polyquaternium-75, Sodium Lactate; Urea, Sodium Chloride, Lactic Acid, Glycerin, Levulinic Acid, p-Anisic Acid) is a conditioning agent with emulsifying properties. Especially suited for leave-on and rinse-off hair treatments. Improves combing, gloss and manageability of hair. Supports the water resistance of emulsions. Recommended use level: 1 – 5% Biophilic™ (INCI: BIOPHILIC™ H: Hydrogenated Lecithin (and) C12-16 Alcohols (and) Palmitic Acid; BIOPHILIC™ S: Lecithin (and) C12-16 Alcohols (and) Palmitic Acid) is a patented natural lamellar O/W system based on the emulsifying properties of Phospholipids combined with other vegetable Lipids. The lamellar emulsion mimics the Lipid structure of the Stratum corneum for a perfect affinity. It acts as a ‘second skin’ and therefore helps restore the cutaneous barrier of damaged skin. Two grades exisit: Biophilic™ H (hydrogenated Lecithin) and Biophilic™ S (non-hydrogenated Lecithin and so a chelating agent and anitoxidant is required). The emulsion melts on the skin for a sophisticated skin feel during application and forms a restructuring film which reduces TEWL. Recommended use level: 3 - 6% Dermosoft® DGMC (INCI: Polyglyceryl-2 Caprate) is a coemulsifier that can be used as a deodorant active ingredient due to its activity against gram-positive bacteria. Recommended use level: 0.5 – 1% www.infinity-ingredients.co.uk Dermofeel® easymuls (INCI: PROPOSED: Sunflower Fatty Acids Polyglyceryl-3 Esters Citrate; Helianthus Annuus (Sunflower) Seed Oil) is a potent anionic emulsifier made from high oleic Sunflower oil, Triglycerol and Citric acid to effectively stabilise the oil-waterinterface. The origin of all components come from renewable plant sources. The manufacturing process uses environmentally friendly condensation reactions and does not involve any kind of alkoxylated species. Consequently, Dermofeel® easymuls is PEG and PPG free. The anionic nature combined with its unique molecular structure furnishes Dermofeel® easymuls with many interesting cosmetic properties. Dermofeel® GSC (INCI: Glyceryl Stearate Citrate) is a PEG-free emulsifier, ideal for the prevention of phototoxical effects in sun care products and products exposed to sunlight. The high melting point provides extra thermo-stability. Recommended use level: 1 – 4% Dermofeel® GSC palm oil free (INCI: Glyceryl Stearate Citrate) is a PEG-free emulsifier based on Rape Seed oil that is ideal for the prevention of phototoxical effects in sun care products and products exposed to sunlight. The high melting point provides extra thermo-stability. Recommended use level: 1 – 7% Recommended use level: 1 – 4% Dermofeel® G 10 L Dermofeel® PO (INCI: Polyglyceryl-10 Laurate) is a co-emulsifier made from natural raw materials with excellent cosmetic properties (see also Dermofeel® G 10 LW for a 50% watery solution). Because of its excellent eye and skin compatibility, its pleasant skin-feel and its outstanding detergence, Dermofeel® G 10 L can be used for baby care products and face cleansing, as well as an emulsifier for low-viscosity O/W emulsions and roll-on emulsions. Recommended use level: 0.5 – 1% Dermofeel® GMS 38 (INCI: Glyceryl Stearate) is a commonly used vegetable based consistency enhancer and stabiliser for O/W emulsions. Recommended use level: 2 – 4% Dermofeel® GMS 54 (INCI: Glyceryl Stearate) is a commonly used vegetable based consistency enhancer and stabiliser for O/W emulsions. Recommended use level: 2 – 4% Dermofeel® GMS 91 (INCI: Glyceryl Stearate) is a commonly used vegetable based consistency enhancer and stabiliser for O/W emulsions. Recommended use level: 2 – 4% www.infinity-ingredients.co.uk (INCI: Glyceryl Oleate) is a highly effective emulsifier with outstanding consistency properties for O/W and W/O preparations. Recommended use level: 0.5 – 1% Dermofeel® PP (INCI: Polyglyceryl-3 Palmitate) is a highly effective emulsifier. Due to its chemical structure it covers a wide HLB-range and that causes a very large stability of emulsions. Why not try this material in a PEG-free self-emulsifying bath oil? Recommended use level: 3 – 6% Dermofeel® PS (INCI: Polyglyceryl-3 Stearate) is a very effective emulsifier. Due to its chemical structure it covers a wide HLB-range to provide excellent stability to emulsions. Because of its high melting point the formed gel- and net-structures are also stable at higher temperatures. Can be used in combination with Dermosoft® Octiol to regulate viscosity. Recommended use level: 2 – 4% Dermorganics® GMS-SE (INCI: Glyceryl Stearate SE). Based only on raw materials from Organic origin, this universal anionic emulsifier is widely used for creams and lotions. Ideal for products with higher viscosity, rich skin feel and pleasant application properties. Can be used to produce stable emulsions at pH above 6.8. Enhances the ratio of organic raw materials in organic product concepts. Recommended use level: 6 – 8% Emulmetik™ INCI: Lecithin/ Hydrogenated Lecithin) are natural Lecithins and Phospholipids with various Phosphatidylcholine contents. Used as coemulsifiers, wetting agents or active ingredients, they improve all types of formulation with a unique sensorial and natural approach. Emulmetik™ 320 increases the longevity of fragrance and enables the fragrance level to be reduced (good for allergens). Emulmetik™ 320 is the alcohol-free version that provides fragrance longevity (even after washing), is naturally compliant (if using essential oils) and provides an ultra-light texture. Emulmetik™ 930 is best for wipes, make-up removal and the reduction of pore size. Recommended use level: 0.25 - 15% Heliofeel™ (INCI: Glyceryl Stearate Citrate (and) Polyglyceryl-3 Stearate (and) Hydrogenated Lecithin) is a natural emulsifier for the formulation of O/W emulsions. Easy-to-use, it is compatible with a large variety of oils and forms particularly stable emulsions in the presence of electrolytes and other destabilising agents. Polyvalent, it allows the formulation of a wide range of textures leaving a soft and velvety touch. Ideal for sprayable to cream emulsions, wipes, sun care (HeliofeelTM is not lamellar and so doesn’t penetrate) and make-up applications. Recommended use level: 3 - 6% www.infinity-ingredients.co.uk Symbio®muls GC (INCI: Glyceryl Stearate Citrate, Cetearyl Alcohol, Glyceryl Caprylate) consists of Glyceryl Stearate Citrate, Cetearyl Alcohol and Glyceryl Caprylate, supplied in a small pellet format for convenience and easy dosage. Glyceryl Stearate Citrate is a well-known and powerful anionic emulsifier. Cetearyl Alcohol is widely used as a co-emulsifier and consistency enhancer. Glyceryl Caprylate can be found in many formulations and is used for its wetting properties and antimicrobial effectiveness. This product also provides a number of surprising additional technical advantages, including better dispersibility at lower temperatures and quick formation of homogenous and fine dispersions at temperatures of 40°C and above. All components are produced from sustainable materials and in accordance with all relevant natural cosmetic standards. On top of its excellent emulsifying properties, Symbio®muls GC provides a basic antimicrobial effect that enables you to lower the amount of preservatives. In many cases, the additional use of Dermosoft® products offers possibilities to formulate without traditional preservatives. Recommended use level: 3 – 6% Emulsifiers W/O Dermofeel® GO soft (INCI: Polyglyceryl-2 Sesquioleate) is a natural food-approved emulsifier for W/O formulations. In general, W/O concepts are frequently used for Sun Care and Baby products as well as for intensive skin care, mature skin and protective concepts. However, W/O products are not very popular due to their sensorial profile. The rich and caring concepts are generally perceived as heavy and greasy on the skin by the consumer. Dermofeel® GO soft is a versatile W/O emulsifier with a unique skin feel. It converts W/O creams into soft and pleasant formulations that are easily applied on the skin. The heavy and traditional sensorial profile of W/O formulations will soon be a thing of the past if Dermofeel® GO soft is used. Dermofeel® GO soft is also economic to use and the concentration needed is very low. Recommended use level: 1 – 2% Dermofeel® PGPR (INCI: Polyglyceryl-3 Polyricinoleate) is an extremely effective emulsifier with high skin compatibility for W/O emulsions that contain up to 80% water. Its stability against radical oxidations makes it a highly interesting material for sun care products. Recommended use level: 4 – 6% www.infinity-ingredients.co.uk Dermofeel® PO (INCI: Glyceryl Oleate) is a highly effective emulsifier with outstanding consistency properties for O/W and W/O preparations. Recommended use level: 0.5 – 1% Symbio®muls WO (INCI: Polyglyceryl-3 Polyricinoleate, Sorbitan Sesquioleate, Cetyl Ricinoleate, Glyceryl Caprate, Cera Alba, Magnesium Stearate, Aluminium Tristearate) is an emulsifier blend for W/O emulsions based on Dermofeel® PGPR. This 100% natural, PEG-free W/O emulsifier is highly versatile and very easy to use (one pot, hot or cold). Cream to body milk formulations can be easily produced. Recommended use level: 5 – 10% Gelling Agents Ecogel™ (INCI: Lysolecithin (and) Sclerotium Gum (and) Xanthan Gum (and) Pullulan) is a patented optimised combination of natural origin ingredients derived from a green process (contributing to the sustainable preservation of the environment): Lysophospholipids, Xanthan gum, Sclerotium gum and Pullulan. Its performances make it the first natural and organic Phospholipidbased gelling-emulsifying agent on the market. It allows the creation of natural gelcreams with an ultra-soft and light skin feel. Ecogel™offers an excellent silicone-like slip ideal for skin, hair and lubricants. Electrolyte tolerant. Recommended use level: 0.3%: Skin feel enhancer; 1%: Stabiliser and viscosity adjuster for all kind of emulsions; 1.5-2%: Main gelling and emulsifying agent for gelcreams. Heliogel™ (INCI: Sodium Acrylates Copolymer (and) Hydrogenated Polyisobutene (and) Phospholipids (and) Polyglyceryl-10 Stearate (and) Helianthus Annuus (Sunflower) Seed Oil) is a patented gelling ingredient with emulsifying properties confered by the presence of Sunflower Phospholipids. It thickens within a wide pH range and emulsifies all types of oil phases. Gel-creams can be formulated with an innovative skin feel, non-tacky and non-greasy. Heliogel™ is the solution to combine performance and skin sensation. Ideal as a viscosity adjuster, stabiliser and emulsifier for gel-creams (from 1%). Recommended use level: 0.2 - 3% www.infinity-ingredients.co.uk Lecigel™ (INCI: Sodium Acrylates Copolymer (and) Lecithin) is a gelling agent with emulsifying properties that increases the stability of formulas. Suitable for both cold and hot processes, it also helps to adjust the viscosity at the end of the formulation process. Easy to use, it is compatible with most emulsifiers and is stable over a wide range of pH (up to pH 12). Especially adapted for the formulation of gel-creams, it provides the typical ‘Phospholipid touch’ with a cool, soft and non-greasy skin feel. Recommended use level: 0.2 - 4% Interested? Then please call one of our team for more information... Andrew Goodwin Managing Director T: 01344 397 768 M: 07969 078 557 E: [email protected] Clare Goodwin Technical Sales Director T: 01344 397 768 M: 07899 662 727 E: [email protected] W: infinity-ingredients.co.uk