GLOVES GLOVES –
Transcription
GLOVES GLOVES –
How To Choose The Right Glove Pinked Cuff – A zigzag finished appearance commonly found on knit-lined rubber gloves. Rolled Cuff – Gives additional cuff strength and a finished appearance. Acts as a barrier to keep chemicals from running off glove into skin. Straight Cuff – Provides a snug fit to protect from chemical runoff and skin contact. Unlined – Gives you better sensitivity and dexterity than lined gloves. Required where particle contamination is a concern. Powdered unlined gloves make on/off easier and increase comfort. GLOVES Disposable....................................... 123 - 127 Finger Cots................................................127 Chemical Resistant......................... 128 - 133 Poly / Cotton & Cotton.................... 134 - 136 Coated Cotton................................. 136 - 140 Cut Resistant................................... 141 - 146 Leather............................................. 147 - 149 High Temperature......................................150 Welding............................................ 150 - 151 Vibration....................................................152 Mechanic.......................................... 153 - 157 Cleanroom....................................... 157 - 158 Flock Lined – Shredded fiber, usually cotton, applied to inside surface of glove material. Absorbs perspiration. Easy on/off. Wrist/ Forarem length 9-14” Knit Lined – Cotton or synthetic material bonded to in side surface of glove. Absorbs perspiration, adds temperature protection. Jersey Lined – Softest, most comfortable lining. Gives additional temperature protection and greater cushioning effect. Gauge – Thickness of glove material usually measured in mils (1 mil=0.001” gauge). Lower-gauge gloves allow better dexterity and flexibility. Higher-gauge gloves give better protection, but less flexibility. Raw Material Characteristics Advantages Precautions for use Types of hazard Natural Latex Excellent flexibility and resistance to tearing, cuts. Good resistance to numerous acids and ketones. Avoid contact with oils, grease and hydrocarbon derivatives. Elbow Length 14-18” Size To measure your hand size, wrap a tape measure around the palm at its widest point. This measurement, in XS inches, is equivalent to 6-7 the glove size (i.e. 9” measurement = size 9) Neoprene Multi-purpose chemical resistance: acids, aliphatic solvents, ketones. Shoulder Length 30-31” S 7-8 Size Chart M L 8-9 9-10 Nitrile Excellent resistance to abrasion, snags and perforation. Performs well when exposed to sunlight and ozone. Excellent resistance to hydrocarbon derivatives. No natural rubber proteins. Weaker mechanical resistance than natural latex, and nitrile. Avoid contact with ketones and aromatic solvents. XL 11-12 PVC Very good resistance to acids and bases. No natural rubber proteins. Avoid contact with ketones, oxidizing acids and organic compounds containing nitrogen. The longer the line, the greater the resistance to the hazard concerned. Abrasion Cut Tear Puncture Oils and greases Hydrocarbons Acids Non Ketonic solvents Ketonic solvents Washing powders, detergents Phone: 800-MALLORY Fax: 360-577-4244 WWW.MALLORYCO.COM 121 GLOVES – INTRODUCTION Gauntlet Cuff – Extended length protects wrist area. Slides on and off easily. Allows for maximum movement of forearm. INTRODUCTION – GLOVES What To Know About Gloves Supported Hand Protection Supported gloves are great for protection against solvents and chemical resistance, abrasions, cuts and punctures. The glove shell can be dipped into a polymer or the material can be dipped into a polymer before the glove is sewn. The work applications determine which glove option is the best choice for your hand protection needs. Styles and Materials • Dipped - Glove shell dipped in a polymer • Neoprene - Provides greater flexibility plus comprehensive chemical protection • Nitrile - Offers excellent abrasion resistance • PVC - Excellent liquid and solvent protection • Rubber - For applications where gripping power, cut and puncture resistance are a concern • Vinyl - Breathable, easy gripping, minimizes absorption of water, oil and grease • Cut-N-Sewn - Sewn from material dipped in a polymer • Nitrile - Excellent abrasion resistance and dexterity • Vinyl (Impregnated and Laminated) - Flexibility and mild abrasion resistance Unsupported Hand Protection Unsupported gloves are best when there is a need for greater dexterity in applications requiring mild chemical protection or a disposable glove solution. The gauge identifies the mil thickness of a glove. A thin gauge allows a sense of touch and a heavy gauge provides greater protection and durability. Styles and Materials • Heavy Gauge Unsupported - 45- to 50-mil thickness • Latex - Greater protection and durability • Regular Unsupported - 11- to 30-mil thickness • Latex - Canners and flock-lined, natural rubber, most elastic substance known • Nitrile - Unlined and flock-lined, provides cut, snag, puncture and abrasion resistance better than any other rubber • Neoprene - Flock-lined, resists oils and offers less hand fatigue • Neoprene On Latex - Flock-lined, unique dipping process to resist specifically MEK and other ketones and acetones • Neoprene Latex Blend - Flock-lined, blending of two rubbers for multipurpose use • Disposable Unsupported - 5-mil thickness • Latex - Medical or industrial grade, better dexterity, elasticity, cool and comfortable • Vinyl - Medical or industrial grade, durability, softness, no latex allergens • Polyethylene - 125-mil thickness, promotes good hygiene Cotton Hand Protection Cotton gloves are a good choice for comfort and breathability in general-purpose applications and, in heavier weights, for abrasion and heat protection. Cotton gloves can also be used to protect the product as well as the hands. Styles and Materials • Quilted - For heavy multi-purpose applications and added heat protection • Chore - General purpose work • Double Palm - Minimal heat protection • Hot Mill - Moderate heat protection • Single Ply - For multi-purpose applications • Canvas - 8-, 10- or 1-ounce fabric for general purpose work. Some styles have PVC dots to provide better gripping ability and durability • Jersey - 9-ounce jersey for general purpose work. Some styles have PVC dots to provide better gripping ability and durability 122 Phone: 800-MALLORY • Terrycloth - 9-ounce jersey for general purpose work. Some styles have PVC dots to provide better gripping ability and durability • Light Weight - For product protection • Inspectors - Made with cotton or nylon, is reversible, and may also be used as gloves or liners About String Knit Hand Protection String knit gloves are used for general-purpose work applications and can provide cut and abrasion resistance, using high-performance yarns, to further protect the hands when working with sharp objects. Various material weights provide longer durability or additional dexterity where needed. Some styles may be dipped or coated with a polymer to provide a better grip and increase durability. Material Information • High-performance Yarns - For multi-purpose applications that require additional cut protection • Dyneema® Knits - Excellent cut resistance • Kevlar® Knits - Great cut resistance • Stainless Steel - Steelcore, Steelcore II • Multi-Purpose Yarns - For multi-purpose applications • 100% Cotton - Absorbent and breathable • Cotton/Polyester - General purpose work • 100% Synthetic - Less linting than cotton Leather Hand Protection Leather gloves are best for protection from rough objects, sparks and heat, and for cushioning from blows in heavy-duty work requirements. All kinds of leather provide comfort, durability, dexterity, mild heat resistance and abrasion protection. These advantages make leather a traditional favorite for industrial workers. Styles and Patterns • Leather Palms, Gunn Patterns - For protection from rough objects, sparks, heat and cushioning from blows in heavy duty work requirements • Leather Palms, Clute Patterns - Greatest economy glove offering leather protection • Drivers - Allow more dexterity when operating heavy machinery and vehicles • Welders - Provide protection for welding and heat applications • Mig/Tig Welders - afford a fine touch in low heat applications Types Of Leather • Cow - Cow leather is the most commonly used leather within the glove industry due to its plentiful availability. The United States and Australia produce the majority of these hides. The advantages include comfort, durability, excellent abrasion resistance and breathability. Chrome tanning of this leather provides greater wear and heat resistance. • Pig - Pigskin offers the greatest breathability due to the porous texture of this hide. Additionally, pigskin tends to become softer with use and withstands moisture without stiffening. When laundered, this leather will return more to its natural soft texture than other leathers. • Goat - Independent tests have proven this to be stronger and more durable leather. The natural lanolin produced by goats helps to create the softest, most abrasion-resistant leather. This leather is highly recommended for applications requiring tactile sensitivity. Cuts Of Leather • Grain - Grain leather is the smooth external side of the hide. This type of leather provides durability and dexterity • Split - Split leather is the rougher internal side of the hide. The three different types of split leather are side, shoulder or belly split • Side Split - comes from the rib area of the animal. This part of the leather is more durable and provides the greatest protection because of its greater density of fibers • Shoulder Split - is more economical than side, but less durable. The additional movement in the shoulder area creates fewer fibers and a more visible texture difference • Belly Split - is the most economical, but has the least consistency of texture and appearance Fax: 360-577-4244 WWW.MALLORYCO.COM 100% nitrile medical-grade long-cuffed exam glove. The world’s first accelerator-free disposable nitrile glove. 100% nitrile utility grade glove, ambidextrous. Free from the accelerators common in all disposable nitrile gloves which have been linked to workplace conditions like Type IV dermatitis. The hi-vis green color is great for jobs where increased visibility and color-coded operations are critical. Available in a smooth finish or with new textured fingertips, N-DEX Free provides laboratory, pharmaceutical, and industrial workers an accelerator-free, latex-free option with greater grip, comfort and dexterity. 9 1/2” long, 4 mil, powder free. 100 per dispenser, 20 dispensers per case. Please Specify Size: XS, S, M, L, XL Item Description 7705PF 9 1/2”, 4 mil Smooth 7705PFT 9 1/2”, 4 mil Textured 1-19 $12.00 $12.00 20+ $10.29 $10.29 Nitrile is more puncture & abrasion resistant than latex or vinyl, and is the most chemically resistant single-use material. 100% nitrile, non-latex medical-grade glove, available in low-powder or powder-free (PF), and featuring Best’s proprietary beaded and rolled cuff design. The Ultimate N-DEX 9905 and 9905PF are ambidextrous and 11” long, 6 mil thick. Priced per dispenser. Packed 50 pair per dispenser, 20 dispensers per case. Nitrile medical grade long-cuffed exam glove, hand-specific. The N-DEX 9005 and 9005PF are hand-specific and 11” long, 6 mil thick. Priced per dispenser. Packed 50 per dispenser, 6 dispensers per case. Both gloves are rated as a Class 1 medical device. Meets NFPA 1999 requirements for Emergency Response, and OSHA guidelines for handling chemotherapy drugs and bloodborne pathogens. Please Specify Size: S, M, L, XL (XXL available only in 9905PF) Item Description 1-19 9905 9905PF 11” Low-Powder 11” Powder-Free $11.83 $11.83 Item Description 1-5 20+ $10.14 $10.14 6+ 9005 11” Hand-Specific $29.83 $25.14 9005PF 11” Hand-Specific, Powder-Free $29.83 $25.14 *All N-Dex gloves are in Compliance 21CFR, 170-199. Manufactured in an FDA-inspected ISO-9002 registered facility. Made in the USA. N-DEX® Original Nitrile utility grade glove. NITRI-DEX™ 100% nitrile, non-latex utility grade glove, lightly dusted with USP-grade corn starch. A powder-free version is available. The Original N-DEX gloves are ambidextrous and 9 1/2” long, 4 mil thick. **8005 offers more chemical, puncture and abrasion resistance. 100 per dispenser, 20 dispensers per case. Please Specify Size: S, M, L, XL, XXL Item Description 7005 6005PF 8005 9 1/2”, 4 mil. N-DEX Original $11.25 9 1/2”, 4 mil. Poweder-Free N-DEX$12.00 9 1/2”, 8 mil. N-DEX Plus** $14.25 1-19 20+ $9.64 $10.29 $12.21 25 pairs per bag, 6 bags per case. Please Specify Size: XS-XXL Item Description 1-5 707-08 12” Nitri-Dex - Medium $20.42 $17.50 6+ N-DEX NightHawk® CleaN-DEX ® Class 100 - 100% nitrile glove Compatible in all classes of cleanrooms and contain no natural rubber latex or carbamates, which can cause allergic reactions. Patented “low modulus” formulation for the most comfortable “dry end” glove or for double gloving, or under-gloving applications. Thermally activated, these gloves relax and conform from the heat of your hands. Offer improved puncture and chemical resistance, and are inherently more static dissipative for ESD sensitive operations than natural rubber. Cleaner than vinyl. 11” long, 6 mil thick. 50 per bag, 20 bags per case. Please Specify Size: S, M, L, XL Item This unique 12”, 9 mil, Nitri-DEX glove with tractor tread grip and hand-specific design is the perfect “hybrid” to bridge the gap between chemical-resistant and disposable applications. Nitri-DEX is packaged in a poly bag that has right-hand and left-hand specific compartments. Ideal for food processing, agricultural produce, janitorial, automotive, aeronautics and pharmaceutical applications. Color blue. Description C9905PF 11”, Powder-Free, Nitrile 1-9 $16.33 Phone: 800-MALLORY 10+ $13.99 Sleek and sophisticated, the NightHawk is an accelerator-free, textured fingertip, disposable nitrile glove offering the world’s least allergenic disposable nitrile protection. Ideal for jobs where the going gets messy or the application calls for uncompromising tactile feel and touch, NightHawk is perfect for workers in automotive, electronic assembly, laboratory, and law enforcement and security environments. NightHawk offers static-dissipative properties, and excellent protection from blood-borne pathogens where contact with body fluids may occur. 9.5” long, 4 mil thick. Sold in packages of 50. 20 pks/case. Item Description 7700PFTS Small (6-7) 7700PFTM Medium (7-8) 7700PFTL Large (8-9) 7700PFTXLXLarge (9-10) Fax: 360-577-4244 1-19 pkgs. $6.00 $6.00 $6.00 $6.00 WWW.MALLORYCO.COM 20+ $5.14 $5.14 $5.14 $5.14 123 GLOVES – DISPOSABLE NITRILE Ultimate N-DEX® Long Cuff N-DEX® Free DISPOSABLE NITRILE • Dispensers – GLOVES Trilites 984 CP Class 1000 Nitrilite® Powder-Free, 100% Nitrile Nitrilite gloves solve many of the contamination problems caused by vinyl and natural rubber latex gloves in today’s cleanrooms. Designed specifically for critical environments, Nitrilite gloves offer significantly reduced particulate and extractable levels. They are 100% powder-free and contain no plasticizers, silicone, or pigments. Plus, the superior strength of nitrile means Nitrilite gloves can be thinner than comparable vinyl or latex gloves, which results in a lighter, more comfortable glove with improved dexterity and tactility. • Ideal for: cleanrooms, handling sensitive parts and materials 6 mil ambidextrous, design in unique tri-polymer blend of neoprene, nitrile and natural rubber provide comfort of latex exam gloves with added strength, tear resistance and chemical splash protection. Extended 11.5” length offers extra protection to hand & wrist. Textured grip with lightly halogenated finish for optimum tactility and grip; wet or dry. Exclusive finish minimizes tape and label sticking to gloves. Powder-free clean process for no cross contamination. In compliance with 21 CFR, 170-199. • Applications: Laboratory Research, Light Assembly and Sorting, Precision Parts Handling, Light Maintenance Purple color, Sizes S-XL. Packaged 100 per bag, 10 per case, priced per bag. Sold 50 gloves per polypack. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL) Item Description 93-311 5 mil, 12” length, powder-free ambi, beaded cuff, textured fingers. $15.00 1-11 $12.85 Premium Quality 100% Thin-Mil Nitrile Touch N Tuff disposable gloves set a whole new standard in comfort, durability, dexterity, and cleanliness. Made of 100% nitrile, the gloves contain absolutely no fillers, silicones, or plasticizers. And, although they are only 4 mils thick, Touch N Tuff gloves provide three times the puncture resistance of competitive latex or vinyl gloves. 9.5 inches in length, they are available powdered or powder-free. • Ideal for: manufacturing, maintenance and cleanup, intricate parts handling, laboratory analysis/technical work, hazmat Description 9.5” Teal, lightly powdered, 4 mil $11.70 9.5” Teal, powder-free, 4 mil $13.42 1-11 Sold 100 per bag, 10 bags per case. Note-XL gloves 90 pairs/bag. 12+ $10.03 $11.50 • Non-sterile industrial grade gloves in 4 and 8 mil thickness • Textured finish for better grip • Resistance to a wide variety of chemicals • Latex Free. • Ideal for: Food processing, chemical processing, handling biohazards, mail sorting, biomedical and other industrial applications needing tactile sensitivity plus puncture and abrasion resistance. Sold 100 per dispenser box, 10 boxs/case Please State Size : S, M, L, XL. Description 1-11 6015 6020 6025 6030 Powder-Free - Chlorinated 4 mil Powdered 4 mil Powdered 8 mil Powder-Free 8 mil $10.85 $10.33 $12.47 $13.10 124 Phone: 800-MALLORY $13.83 Ideal for food handling and light duty general-purpose jobs. Choose from blue nitrile or natural color, latex to suit your needs. Both styles have 9.5” beaded cuff, and textured fingertips for good grip. NitriShield® Non-Sterile Nitrile Gloves Item Price 984 CP Class 1000 KleenGuard™ G10 . Thin Mil Gloves Caution: Component materials comply with FDA regulations for food contact. TNT gloves are static-dissipative. Sold 100 per dispenser box or 10 boxes/case. Please Specify Size: 6.5-7 (S), 7.5-8 (M), 8.5-9 (L), 9.5-10 (XL) 92-500 92-600 Description 98492 12+ Touch N Tuff® Item Item 12+ $10.40 $9.90 $11.95 $12.60 Item G10 Blue Nitrile 1-9 57370 57371 57372 57373 57374 Size 6-7 (XS) Size 8 (S) Size 9 (M) Size 10 (L) Size 11 (XL) $8.71 $8.71 $8.71 $8.71 $8.71 Item Latex, Powder-Free 1-9 57170 57171 57172 57173 57174 Size 6-7 (XS) Size 8 (S) Size 9 (M) Size 10 (L) Size 11 (XL) $5.77 $5.77 $5.77 $5.77 $5.77 Item Latex, Light Powder 1-9 57270 57271 57272 57273 57274 Size 6-7 (XS) Size 8 (S) Size 9 (M) Size 10 (L) Size 11 (XL) $5.67 $5.67 $5.67 $5.67 $5.67 10+ $8.02 $8.02 $8.02 $8.02 $8.02 10+ $5.31 $5.31 $5.31 $5.31 $5.31 10+ $5.22 $5.22 $5.22 $5.22 $5.22 AK244 Four Compartment Glove Dispenser Great for multifunction use. Store and dispense a variety of items such as wipe packets, small parts, earplugs, hair nets, finger cots or whatever best fits your needs. Hinged lid and doors. Fax: 360-577-4244 Item Description/Size Price AK244 4-Glove Dispenser, 16 3/4”W x 12”H x 8 1/2”D $140.00 WWW.MALLORYCO.COM Unsupported, disposable natural rubber glove. Tactile-sensitive 5 mil Derma Thin is one of a few thin gauge disposable gloves still made in the USA, and surpasses similar-gauge natural rubber and vinyl gloves, in overall quality, performance and value. Derma Thin’s specially formulated, 100% natural-rubber compound features the finest quality natural rubber, so you get outstanding strength, wear, and dexterity in a glove that is cooler, more durable, better fitting, more sensitive and less susceptible to tearing or developing holes than similar-gauge vinyl gloves. Ergonomically-designed Derma Thin is comfortable, fits well, and provides a great grip, wet or dry. Ambidextrous for economy and ease, Derma Thin is lightly powdered with USP-grade corn starch instead of talc for easy donning and doffing to reduce the chance of contamination. 9 1/2” in length, 5 mil thick with rolled cuff. In Compliance 21CFR, parts 170-199. Made in the USA. Packed 100 gloves per dispenser, 20 dispensers/case. Please Specify Size: S, M, L, XL Item Description 1-19 20+ 1005 W1005 9 1/2”, 5 mil, Green 9 1/2”, 5 mil, White $8.75 $8.75 $7.50 $7.50 • Design: powder-free, beaded cuff, textured, ambidextrous • 9.4” long • Thickness: 6.7 mil (at the fingertip) 5.5 mil (palm) 100 gloves (90 for XL)/dispenser box, 10-dispenser boxes/case Item Description 1-9 57110 57220 57330 57440 57550 XS S M L XL $13.79 $13.79 $13.79 $13.79 $13.79 10+ $12.70 $12.70 $12.70 $12.70 $12.70 SAFESKIN® LPE . Powdered Natural . Rubber Latex™ Exam Gloves • • • • 9.5” long with beaded cuff Smooth Ambidextrous Thickness: 6.7 mil (at the fingertip) 5.5 mil (palm) 100 gloves (90 for XL)/dispenser box Conform® 5-Mil, 100% Natural Rubber Latex Conform gloves provide the highest degree of dexterity available with the strength and comfort of 100% natural rubber latex. Component materials comply with FDA regulations for food contact. Conform gloves are available in three styles and two colors to allow you to choose the correct glove for your specific application. • Ideal for: laboratory analysis/technical work, intricate parts handling, food processing and handling, quality control, electronics assembly, light-duty maintenance and cleanup This product contains natural rubber latex, which may cause allergic reactions in some individuals. 5 mil, 9-1/2”, natural, powdered, exam glove. 100 gloves/box; 10 boxes/case. Sizes: S, M, L, and XL Item Description 1-9 69-210 Conform Latex gloves $6.08 10+ $5.21 Item Description 1-9 57270 57271 57272 57273 57274 XS S M L XL $5.67 $5.67 $5.67 $5.67 $5.67 10+ $5.22 $5.22 $5.22 $5.22 $5.22 SAFESKIN® Satin Plus Powder-Free Natural Rubber Latex™ Exam Gloves • Beaded cuff, smooth, ambidextrous • 9.4” long • Thickness: 6.7 mil (at the fingertip) 5.5 mil (palm) 100 gloves (90 for XL)/dispenser box, 10-dispenser boxes/case Conform XT ® Disposable Natural Rubber Latex Conform XT is 100% natural rubber latex features a textured grip, and qualifies as a Class I medical device. • Ideal for: laboratory analysis/technical work, food processing and handling, quality control, electronics assembly, light-duty maintenance and cleanup Component materials comply with FDA regulations for food contact. This product contains natural rubber latex which may cause allergic reactions in some individuals. Description 1-9 69-318 Conform XT Latex gloves $11.23 Phone: 800-MALLORY Description 1-9 SP2110 SP2220 SP2330 SP2440 SP2550 XS S M L XL $8.38 $8.38 $8.38 $8.38 $8.38 10+ $7.65 $7.65 $7.65 $7.65 $7.65 Economy Latex Disposable Latex disposable gloves. Made with USDA approved materials (for safe food handling). Ambidextrous, 9”, with rolled cuff, available in lightly powdered and powder-free. Natural, powder-free, textured grip, 5 mil, Class I medical device 100 gloves per dispenser, 10 dispensers per case. Sizes S, M, L, XL Available in sizes: S, M, L, and XL. Item Item Packed 100 gloves per dispenser, 10 dispensers per case. Please Specify Size: S, M, L 10+ $9.63 Item Description 1-9 GRDR GRPR 9”, 5 mil. Powdered 9”, 5 mil. Powder-Free $5.40 $6.23 Fax: 360-577-4244 WWW.MALLORYCO.COM 10+ $4.90 $5.65 125 GLOVES – DISPOSABLE LATEX Derma Thin™ SAFESKIN® PFE . Powder-Free . Natural Rubber Latex™ Exam Gloves DISPOSABLE LATEX, VINYL – GLOVES 911A Series Helping Hands™ Glove Program Latex Powder-Free “High Risk” Exam Gloves Help fight Childhood Cancer. Each uniquely designed box you purchase will result in direct finacial support to those lives touched by childhood cancer. 12”, 14 mil latex, ambidextrous, powder-free, dispenser boxed, textured examination glvoes. Tapered, beaded cuff. Meets or exceeds FDA specs. 50 Gloves/box, 500 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104). LEX Series Lightly Powdered - Medical Exam 10” latex, ambidextrous, lightly powdered, dispenser boxed, smooth examination gloves. Tapered, beaded cuff. Meets or exceeds FDA specs. 100 Gloves/box, 1000 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104). Item Description 1-9 911A 12” Latex Powder-Free $10.52 10+ $9.25 NPX Series Item Description 1-9 LEX 10” Latex, Lightly powdered $4.86 10+ $4.04 Powder-Free Medical Exam 10”, 14 mil nitrile, ambidextrous, powder-free, dispenser boxed, full textured examination gloves. 100 Gloves/box, 1000 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104). LPX Series Powder Free - Medical Exam Item Description 1-9 NPX NPXO 10” Nitrile Powder-Free 10” Nitrile Powder-Free Orange $10.05 $10.24 10+ $9.25 $9.40 9” latex, ambidextrous, powder-free, dispenser boxed, smooth examination gloves. Tapered, beaded cuff. Meets or exceeds FDA specs. 100 Gloves/box, 1000 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104). PFXT SERIES Item Description 1-9 LPX 9” Latex, Powder-Free $6.03 10+ $5.55 LPXT Series Powder Free - Medical Exam 10” latex, ambidextrous, powder-free, dispenser boxed, textured examination gloves. Tapered, beaded cuff. Meets or exceeds FDA specs. 100 Gloves/box, 1000 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104). Item Description 1-9 LPXT 10” Latex, Powder-Free $6.21 10+ Latex Powder-Free Cleanroom Class 100 Gloves • Textured surface • Low protein and contact sensitizers • Class 100 (m3.5) clean room compatible or higher Controlled environments • Double chlorinated • Double bagged • Tapered, beaded cuff • 10” And 12” length, ambidextrous • Total protein content <50ug/g of glove (ppm) using modified Lowry Method • Leak tested • Meets or exceeds FDA requirements with 510(k) registration • Meets ASTM D3578-95 standards • Sampled in accordance with MIL STD-105E • Complies with U.S. Government 21 CFR 177.2600 for food handling • Qualified for use in the pharmaceutical industry 10” PFXT Series sizes – Small (1), Medium (2), Large (3), X-Large (4) 12” PFXT Series sizes - Small (1), Medium (2), Large (3), X-Large (4) $5.72 Item Description 1-9 PFXT10* PFXT20* 10”, PFXT Low Powder Glove 12”, PFXT Low Powder Glove $6.58 $8.86 10+ $6.06 $7.91 We stock a full line of Clean Room gloves and related products, so please ask if you do not see what you need! 126 Phone: 800-MALLORY Fax: 360-577-4244 WWW.MALLORYCO.COM • • • • • • • • Lightly Powdered Vinyl . Disposables Choose powdered or powder-free 5 mil thickness Textured finish for better grip Rolled cuffs Component materials comply with FDA regulations for food contact Ambidextrous Double chlorinated where noted by suffix of DC Ideal For: clinical laboratories, nursing home care, dentistry, patient examinations, pharmacy, and veterinarians Vinyl disposable gloves, lightly powdered, 12” long. Ideal for: electronics, janitorial, labs, maintenance, painting, poultry and meat handling, and seafood processing. Packed 100 gloves per dispenser, 10 dispensers per case. Please Specify Size: S, M, L, XL Item Description 1-9 V1000 12” Powdered Vinyl Disposable $5.04 10+ $4.34 100 gloves per dispenser, 10 dispensers per case. Sizes S, M, L, XL Item Description 1-9 10+ Medical Grade 5000 5010 5045 5048 5050 Vinyl Powdered, Clear $5.12 Vinyl Powder-Free,Clear $5.64 Latex Powder-Free, Textured DC $8.75 Med,Tech Powder-Free Latex, DC 12” length, blue 50/per box $11.70 Powdered Latex, Clear $6.78 $4.91 $5.41 $8.40 $11.24 $6.50 Barrier Flat-Film, Hand-Specific, Non-Woven Liner A major breakthrough in flat-film glove technology, Barrier gloves feature a unique non-woven liner that absorbs perspiration and makes the gloves comfortable to wear, especially for extended periods. In addition, the winged-thumb, hand-specific design provides greater dexterity. Proprietary seam-fusion technology provides a secure seal against chemicals and also assures a flexible, comfortable fit for greater dexterity and reduced hand fatigue. • Ideal for: petrochemicals and refining, chemical transport, hazmat work, aircraft and aerospace Flat film, hand-specific, 2.5 mil 1 pair per polybag. Please state Right or Left hand and size, 6, 7, 8, 9, 10, 11. Sensatouch™ Vinyl Food and lndustrial Grade gloves • Choose powdered or powder-free • 5 mil thickness or 6.5 Mil Item Description 1-9 10+ 2-100 Non-woven liner $6.11 $5.24 100 gloves per dispenser, 10 dispensers per case. Sizes S, M, L, XL Item Description 1-9 10+ Food Industry Grade 5015 5020 5025 5055 5060 Powder-Free, Clear Vinyl Powdered, Clear Vinyl Powdered, Green, Vinyl 6.5 Mil Powder-Free Latex, Blue, DC Powdered Latex, Blue $5.38 $4.95 $3.44 $8.66 $6.26 $5.16 $4.75 $3.30 $8.30 $6.00 Finger Cots 3 mil white latex. Finger cots provide low cost, convenient protection when whole hand coverage is not needed. Static dissipative. Available rolled and priced per gross. Please Specify Size: S, M, L Item Description Price R200LWR Finger Cots $4.42 VersaTouch™ Versatile, Economical 5-mil Vinyl Gloves When you need economical hand/product protection, VersaTouch clear 5-mil PVC gloves are the best choice. They offer near “bare hand” dexterity and sensitivity, and are available lightly powdered or powder-free. Component materials comply with FDA regulations for food contact. • Ideal for: light manufacturing, maintenance and cleanup, painting and janitorial use SAF-T-TAPE® Self-Adhering Gauze • Improves grip while protecting fingers • Allows greater flexibility than gloves • Sticks to itself, not to skin or hair • Permits skin to breathe for greatest comfort Sold 100 per box or 10 boxes/case. Please Specify Size: S, M, L, XL Item Description 1-11 34-700 34-725 34-775 White, lightly powdered White, powder free Blue, lightly powdered $5.75 $9.00 $5.75 Phone: 800-MALLORY 12+ $4.93 $7.71 $4.93 Item Description UOM Price 110-075 110-100 3/4” x 30 yd 1” x 30 yd 16 per tube 12 per tube $21.57 $21.57 Fax: 360-577-4244 WWW.MALLORYCO.COM 127 GLOVES – DISPOSABLE LATEX, VINYL Sensatouch™ Vinyl and Latex Medical Grade Exam gloves CHEMICAL RESISTANT PVC – GLOVES Ultimate Glove Premium Double-Dipped PVC Gloves PVC Coated - Cotton Lined • Maximum resistance to chemicals, oils, solvents and strong acids • Double-dipped sandy finish green with knit wrist • Flexible with interlock lining • Non-slip grip in wet or dry applications • Treated with Actifresh • Ideal for: working with oils and solvents, petrochemicals and refining Petroleum resistant, triple dipped, seamless gloves. • Textured PVC grip over 100% seamless, cotton lining • Ergonomic design provides dexterity and comfortable fit • Heavy-duty PVC coating for puncture and liquid protection • Premium appearance and excellent durability Sold per dozen, 72/case. Sizes: M-XL. Color: Blue. Item Description 1-5 73356 Blue Ultimate Glove $38.40 6+ $34.56 Sold per dozen or 72/case. Size: Men’s Large Item Description 1-11 dz. 6400 6410 6412 6414 6418 Knit Wrist 10” Gauntlet 12” Gauntlet 14” Gauntlet 18” Gauntlet $27.71 $30.10 $33.14 $36.07 $50.09 12+ $26.56 $28.85 $31.77 $34.58 $48.01 Snorkel® PVC-Coated, Premium Quality One of Ansells premium gloves, Snorkel features a unique PVC rough finish which provides outstanding chemical resistance, wear, and flexibility. The finish contains nylon particles that increase the glove’s cut/abrasion resistance and wet grip capabilities, while the PVC compound provides greater flexibility and comfort. Choose between an interlock knit lining for increased flexibility and launderability or a jersey lining for cushioning and moderate insulation. • Ideal for: : Petrochemicals and refining, handling equipment and abrasive materials coated with acids, caustics, solvents, grease, and oil. Sold per pair. Item Description 1-11 12+ Fully coated, knitwrist, jersey-lined $3.18 $2.73 Fully coated, 12” gauntlet, jersey-lined Fully coated, 14” gauntlet, jersey-lined Fully coated, 12” gauntlet, knit-lined Fully coated, 14” gauntlet, knit-lined Fully coated, 10” gauntlet, jersey-lined $3.90 $4.02 $4.80 $5.15 $3.60 $3.34 $3.44 $4.11 $4.41 $3.08 Women’s S, Men’s L 4-404 Men’s M & L 4-412 4-414 4-452 4-454 4-460 Super Flex™ Smooth finish fully PVC-coated Best’s exclusive, low-temperature-resistant PVC formulation keeps recyclable Super Flex soft and supple even in cold conditions, while providing excellent abrasion resistance and protection from a broad range of chemicals. Its two-piece jersey liner enhances worker comfort and glove flexibility, and its yellow color provides a high-contrast, visual warning of possible contamination due to spill, splash or splatter. Super Flex is available in a variety of styles, including a rough-finished style for applications where a good wet grip is required. Sanitized®. Made in the USA. Sold per pair or by 72/case. Size: Large Item Description 1-11 12+ 753 755 756 -10 Knit Wrist 12” Gauntlet Elbow-Length Gauntlet $3.42 $3.90 $5.49 $2.93 $3.34 $4.91 Cannonball™ Gloves High-grade PVC coating provides outstanding chemical resistance, wear and flexibility, making this glove an excellent choice for abrasive chemical applications. Featuring a unique, non-slip wet grip. Suitable for handling slick, abrasive materials, provides good protection against a wide range of chemicals. Launderable. Soft, two-piece jersey liner enhances worker comfort and dexterity. Sanitized®. Made in the USA. Sold per pair or by 72/case. PVC Insulated Glove Item Description 1-11 12+ 803 L803 810 L811 812 812M 814 Knit Wrist, Large Knit Wrist, Small 10” Gauntlet, Large 11” Gauntlet, Small 12” Gauntlet, Large 12” Gauntlet, Medium 14” Gauntlet, Large $3.42 $3.42 $3.35 $3.65 $3.90 $3.90 $4.02 $2.93 $2.93 $2.87 $3.13 $3.34 $3.34 $3.44 Double dipped PVC, resists oils, solvents, and chemicals. The Atlas 460 has a seamless 100% acrylic pile lining to keep hands warm and dry. The insulated lining flexes with the glove, reducing the hand fatigue associated with working in cold environments. The double-dipped PVC coating is waterproof and chemical resistant, and is textured for positive grip, wet or dry. Sold per pair. Item Description 1-11 12+ 460 PVC insulated glove $10.36 $9.25 128 Phone: 800-MALLORY Economy Foam-Lined PVC Fluorescent orange PVC glove is fully coated and foam-lined with a knit wrist. Sold per pair. Fax: 360-577-4244 Item Description 1-11 12+ M6700 2 1/2” Rubberized Safety Cuff $2.86 $2.59 WWW.MALLORYCO.COM 600 Vinylove™ Petroflex® Knit wrist for a snug fit, soft, flexible PVC coating. PVC-Coated The 600 offers comfort and flexibility as well as liquid-proof protection for hands in wet working environments. This short style glove has a specially formulated PVC coating on an ergonomically shaped seamless liner, with a cotton knit wrist. 600 620 Vinylove™ PVC double-dipped seamless knit, outperforms unsupported latex gloves. An economical choice for applications where gloves become excessively contaminated or where glove controls are difficult to administer. The rough finish optimizes cut/abrasion resistance and provides excellent wet grip, while an interlock knit cotton lining provides flexibility and launderability. A jersey lining is also available for cushioning and moderate insulation. • Ideal for: refining and petrochemicals, machining, construction, forestry, mining, utilities, handling equipment and abrasive materials coated with oil, grease, acids, and solvents Sold per pair or 72/case. Size: Large Item Provides workers with maximum comfort and dexterity. Liquid- and chemicalresistant PVC coating remains flexible in cold temperatures and provides an excellent grip. Description 1-11 12+ Fully coated, jersey-lined 620 660 Vinylove™ Triple-dipped PVC, resists oils, solvents, and chemicals. 12-202 12-210 12-212 12-214 knitwrist, 10” gauntlet 12” gauntlet 14” gauntlet $2.00 $2.22 $2.40 $2.70 $1.71 $1.90 $2.05 $2.31 $2.40 $2.70 $2.05 $2.31 Fully coated, knit-lined 12-252 12-254 Suited to a variety of work applications requiring added protection. The 660 has the protection, comfort, and dexterity required for hard-working hands. 10” gauntlet 12” gauntlet 660 Sold per pair or by 144/case. Item Description 1-11 12+ 600 620 620X 660 Green, Knit Wrist M-XL 12” Orange, S-L 12” Orange XL 12” Blue, S-L $3.10 $3.95 $4.25 $3.36 $2.38 $3.20 $3.60 $2.58 Fuzzy Duck® Features Best’s exclusive, breathable, PVC coating on a soft, comfortable, two-piece jersey liner. Abrasion resistant Fuzzy Duck outwears and replaces cotton, light-to-medium-weight leather, and goatskin gloves for a variety of applications. While not liquid-proof, the textured coating provides an excellent grip and minimizes absorption of water, oil and grease, although not a true anti-vibration glove, Fuzzy Duck tends to absorb and minimize shock, too. Sanitized®. Made in the USA. Economy Double-Dipped . PVC Gloves • Black, sandy textured finish with interlock lining • Ideal for: basic liquid, mild chemical protection, auto industry, construction & mining • Men’s size Large fits most Sold per pair or by 72/case. Item Description 1-11 12+ 6500S 6510S 6512S 6414S Knit wrist 10” Gauntlet 12” Gauntlet 14” Gauntlet $1.36 $1.56 $1.72 $3.06 $1.13 $1.29 $1.65 $2.48 Sold per pair or by 72/case. Please Specify Size: S, M, L, XL Item Description 1-11 12+ 962 Fully-Coated Slip-on $2.68 $2.30 Temp-Sea 770 Heavy Weight, smooth Blue 11” glove with thermal lining and over-edged cuff. Liner made from acrylic terry knit with brushed jersey for comfort and cold temperature protection (-22 degrees Fº). Specially formulated Blue PVC coating provides liquid proof protection in wet applications, while maintaining flexibility and dexterity in cold environments. Offers excellent resistance to oil, grease and hydrocarbon. • Ideal for: Fishing applications; Road maintenance; Cold storage facilities; Maintenance at ski resorts; Food industry, handling and operation of cold storage units. PVC Gloves • Interlock and with smooth or sandy finish • Fully coated-Black PVC • Ideal for: liquid and basic chemical protection for refining, mining and utilities, petrochemicals, fishing, ship building, and handling abrasive materials coated with grease and oil, caustics, acids and solvents. Sold per pair, 48 pairs per case. Sold per dozen pair or by 12dz/case. Size: Men’s Large Item Description 1-11 6212 6212R 12” Smooth Gauntlet 12” Rough-sandy Gauntlet $13.77 $14.81 Phone: 800-MALLORY 12+ $13.20 $14.20 Item Description Price 77039 Temp-Sea $12.87 Fax: 360-577-4244 WWW.MALLORYCO.COM 129 GLOVES – CHEMICAL RESISTANT PVC Vinylove™ Liquid Proof CHEMICAL RESISTANT LATEX – GLOVES Unsupported Lined Latex Gloves Chemical Resistant Gloves Sold per dozen pair or by 12dz/case. • 18 Mil., Flock lined, yellow, recessed diamond grip • Rolled bead cuff for tear resistance • Provides resistance to acids, alkalis, alcohols, salts, ketones • Flock lining provides increased comfort and ease of donning • Chlorinated • 12” length • Ideal for: electronics, laboratory, assembly and maintenance • • • • 12” length, 18 mil thickness Embossed grip on palm and fingers Straight cuff Flock lined for easy on, easy off as well as perspiration absorption • Component materials comply with FDA regulations for food contact • Industry Applications: Food-processing industries, janitorial work, poultry, and research laboratories. Item Yellow Flocked 1-11 dz. 5270P 5280P 5290P Size 7 Size 8 Size 9 $7.92 $7.92 $7.92 Item Blue Flocked 1-11 dz. 5270PB 5280PB 5290PB Size 7 Size 8 Size 9 $7.92 $7.92 $7.92 12+ 12+ $6.60 $6.60 $6.60 Providing unequalled value, comfort, and flexibility as well as outstanding tactile sensitivity, strength, dexterity and elasticity, the form-fitting 12”, 18-mil, 100% naturalrubber-latex Value Master feature a selfflushing tractor-tread pattern that provides an excellent grip, wet or dry, and encourages run off of fluids often trapped by diamondshaped embossed patterns. Value Master resists a wide range of chemicals, including animal fats, caustics, acids, oils, salts, alcohols and detergents. Each Value Master is air tested to ensure quality. Value Master is available unlined, either amber (VMU) or blue (VMUP) or flock lined, either yellow (VM) or blue (VMP). The VMU and VMUP are chlorinated to provide extra, casehardened chemical resistance and to ease donning and doffing. The VM and VMP feature 100%-cotton flocking for added comfort. Value Master gloves are available in four sizes for a perfect fit. Sold by the dozen or12dz/case. Description-Size 1-11 dz. VMUAS VMUAM VMUAL VMUAX VMUPS VMUPM VMUPL VMUPX Unlined-amber - small (07) Unlined-amber - medium (08) Unlined-amber - large (09) Unlined-amber - extra large (10) Unlined-blue - small (07) Unlined- blue - medium (08) Unlined- blue - large (09) Unlined- blue - extra large (10) $8.52 $8.52 $8.52 $8.52 $8.52 $8.52 $8.52 $8.52 Item Description-Size 1-11 dz. VMS VMM VML VMX VMPS VMPM VMPL VMPX Flock-lined-yellow - small (07) $7.08 Flock-lined-yellow - medium (08) $7.08 Flock-lined-yellow - large (09) $7.08 Flock-lined-yellow - extra large (10)$7.08 Flock-lined-blue - small (07) $7.08 Flock-lined- blue - medium (08) $7.08 Flock-lined- blue - large (09) $7.08 Flock-lined- blue - extra large (10) $7.08 130 Phone: 800-MALLORY Sold per Dozen or 12 dz/case. Please Specify Size: S-XL $6.60 $6.60 $6.60 Value Master™ ChemicalResistant Gloves Item General Duty -Unsupported Latex 12+ $7.32 $7.32 $7.32 $7.32 $7.32 $7.32 $7.32 $7.32 12+ $6.12 $6.12 $6.12 $6.12 $6.12 $6.12 $6.12 $6.12 Item Description 1-11 dz. 48-G12Y 18 mil, flock lined $7.98 12+ $6.88 Canners and Handlers™ Unsupported, unlined, medium-duty, natural rubber latex Featuring excellent dexterity, tensile strength, and elasticity, our 20-mil Canners and Handlers gloves are a good choice for chemical, snag, puncture, abrasion, and cut resistance. Offered in two lengths for added protection against chemical hazards and two embossing designs (pattern and pebble) for excellent grip on wet or dry surfaces. These gloves are made with component materials that comply with FDA regulations for food contact. • Ideal for: poultry, food processing, small parts assembly, pharmaceutical manufacturing, janitorial/plant maintenance. Sold per dozen or 144/case. This product contains natural rubber latex, which may cause allergic reactions in some individuals. Item Description-Size 384 392 394 Natural, pattern, embossed, 20 mil, 14” 7, 8, 9, 10 $15.60 Natural, pebble- embossed, 20 mil, 12” 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11 $9.36 Natural, pattern- embossed, 20 mil, 12” 7, 8, 9, 10 $9.36 1-11 dz. 12+ $13.32 $8.04 $8.04 Unsupported Latex Gloves • • • • • 12” length, 18 mil thickness Embossed grip on palm and fingers Scalloped or straight cuffs Chlorinated for easy on, easy off Component materials comply with FDA regulations for food contact • Industry Applications: canning and food-processing industries, janitorial work, maintenance, R & D. Sold per dozen pair or by 12dz/case. Sizes: 7-7-1/2; 8-8-1/2; 9-9-1/2; 10-10-1/2 Item Scalloped Cuff 1-11 dz. 5080E 5080B 5090E 5090B Size 8 - Amber Size 8 - Blue Size 9 - Amber Size 9 - Blue $7.92 $7.92 $7.92 $7.92 Item Straight Cuff 1-11 dz. 5180E 5180B 5190E 5199B Size 8 - Amber Size 8 - Blue Size 9 - Amber Size 9 - Blue $8.04 $8.04 $8.04 $8.04 Fax: 360-577-4244 WWW.MALLORYCO.COM 12+ $6.60 $6.60 $6.60 $6.60 12+ $6.72 $6.72 $6.72 $6.72 Chem Master™ Neoprene Over Rubber For insulation against heat or cold, Insulated Neoprene features a triple-layer construction of foam insulation sandwiched between a layer of 100% cotton jersey and 100% cotton interlock. Gloves are fully coated and rough finished. Sold per pair, Large only. Item Description/Size 1-11 dz. 12+ 6781R10 12” Gauntlet, Insulated $10.93 6781R0610 6” Nitrile, Laminated $16.67 6781R145 14” Nitrile, Laminated, Sewn Sleeve$23.88 $9.37 $14.92 $20.47 Defensive Guard™ Neoprene Gloves Neoprene over natural rubber construction provides excellent abrasion, tear, and puncture resistance. 100% cotton flock lining. 13” long, 26-mil, flock-lined, tractortread grip, black over blue safety feature. Suggested applications: automotive and battery manufacturing, chemical plants, aircraft assembly, food processing, pesticide manufacturing, plant maintenance and printing clean up. 21CFR, 170-199 compliant. Sold per dozen or by 144/case. Please Specify Size: S, M, L, XL Item Description 1-11 dz. CHM 13” Chem Master, 26 mil $17.52 12+ $15.12 Chemi-Pro® Unsupported, Heavy-Duty, Cotton Flock-Lined, Neoprene Over Natural Rubber Latex Neoprene-coated glove with sewn-on nitrile-laminated sleeve. This rugged glove is suitable for many pellet-blasting and sandblasting applications. Launderable, the sleeve is not liquid-proof, although the gauntlet itself is. Sold per pair. Item Description/Size 1-11 6780-20 12” Gauntlet, Smooth, w/ Sewn-on sleeve $26.80 12+ $22.03 Neoprene™ Gloves Multi-dipped in premium grade Neoprene for superior quality and durability and provides excellent protection against acids, caustics, oils, greases and many solvents. Suggested applications: degreasing, petrochemicals, refining, metal fabrication, plating, galvanizing, and general material handling. A unique dipping process which combines neoprene over natural rubber latex provides increased protection against a wide range of chemicals. The gloves are 27 mil thick for extra ruggedness and durability, and the 13” length is longer than most standard gloves for added forearm protection. A recessed diamond-embossed pattern provides added grip on wet or dry surfaces, while a cotton flock lining absorbs perspiration and increases worker comfort. Chemi-Pro gloves are an economical, cost-saving substitute for higher-priced, heavy gauge nitrile and neoprene gloves. • Ideal for: aircraft assembly, automotive manufacturing, chemical plants, pesticide manufacturing and plant maintenance Caution: This product contains natural rubber latex, which may cause allergic reactions in some individuals. Sold per dozen. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL) Item Description 224 Blue/yellow, diamond- embossed, flock-lined, 27 mil, 13” $17.40 1-11 dz. 12+ $14.88 Sold per pair. Item Description 1-11 12+ $4.63 $6.10 $7.23 $10.20 $3.97 $5.23 $6.20 $8.74 $6.10 $7.23 $5.23 $6.20 Smooth Finish 5122 6780 6784 6797-10 Knit Wrist, Fully Coated, Large 12” Gauntlet, Fully Coated, Large 14” Gauntlet, Fully Coated, Large Elbow-Length, Palm Coated, Large Rough Finish 6780R-10 12” Gauntlet, Fully Coated, Large 6784R-100 14” Gauntlet, Fully Coated, Large ChemTech Unsupported . Neoprene-on-Latex Gloves • Component materials comply with FDA regulations for food contact • 28 and 30 mil thick • Flocked-lined, ocean blue with yellow cuff • Embossed grip on palm and fingers • Industry Applications: aircraft assembly, automotive and battery manufacturing and printing industry. • Lined-Black Sold per dozen pair or by 12dz/case. Please state size when ordering. Neoprene Dry Box Gloves Neoprene, 8” dia cuff, 15 mil, 32” length, ambidextrous. Sold per pair. Please Specifiy Size: 9Q (9 3/4), 10H (10 1/2). Item Description Price 8N1532A/10H Dry Box Gloves 8N1532A/9Q Dry Box Gloves $122.65 $122.65 Phone: 800-MALLORY Item 28 mil – Blue/Yellow 1-11 dz. 5406S 5407S 5408S 5409S 5400S 5401S Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 $22.49 $22.49 $22.49 $22.49 $22.49 $23.47 Item 30 mil – Black 1-11 dz. 5435 Sizes: S, M, L, XL $28.08 Fax: 360-577-4244 WWW.MALLORYCO.COM 12+ $21.56 $21.56 $21.56 $21.56 $21.56 $22.50 12+ $26.88 131 GLOVES – CHEMICAL RESISTANT NEOPRENE Insulated Neoprene™ . & Nitrile Gloves CHEMICAL RESISTANT BUTYL, VITON, NITRILE – GLOVES Viton®/Viton® II Butyl Glove Unsupported Viton glove. Butyl gloves exhibit the highest permeation resistance to gas or water vapors. Ideal for use in ketones and esters. 13 mil, 11” length. Sold per pair. Please specifiy size: 7, 8, 9, 10, 11 Item Description Price B131 11” 13 mil. Butyl Glove $20.31 Heavy-duty yet flexible, Viton gloves were developed for the highest chemical-resistance barrier to aromatic hydrocarbons such as benzene, toluene or xylene. Viton II gloves also offer an excellent barrier to most chlorinated solvents and aliphatic hydrocarbons. Smooth finish with rolled cuff. 890 14”, 30 mil Unlined, Please Specifiy Size: 9 (L), 10 (XL) 892 12”, 12 mil Please Specifiy Size: S, M, L, XL, XXL Sold per pair. ChemTek™ Performs under the toughest conditions Offerin the broadest line of highly resistant chemical protective gloves in the industry. For an extra measure of security, each pair is packed with an individual insert so critical information is always at your fingertips. ChemTek butyl gloves deliver the ketone resistance of natural rubber plus better hydrocarbon resistance. They also provide the ester resistance of nitrile with improved aldehyde resistance. If you need superior resistance for ester, ketones and oxidizing agents including concentrated oxidizing mineral acids such as 70% nitric and 98% sulfuric, you’ll find a ChemTek butyl glove that fits your application. The Viton layer over the butyl means a lower-cost glove for aggressive chemical exposure. • Ideal for: maintenance, sampling, production, hazmat, first response, unknown exposure Sold per pair. Item Description & Size 1-11 12+ 14 mil, smooth finish, 12” length 7, 8, 9, 10, 11 14 mil, rough finish, 12” length 7, 8, 9, 10, 11 20 mil, rough finish, 12” length 9, 10 14 mil, smooth finish, 14” length 7, 8, 9, 10, 11 20 mil, smooth finish, 14” length 9, 10 28 mil, smooth finish, 14” length 9, 10 14 mil, rough finish, 14” length 7, 8, 9, 10, 11 20 mil, rough finish, 14” length 9, 10 $17.20 $14.74 $18.05 $15.47 $23.02 $19.73 $22.75 $19.50 $25.83 $22.14 $32.08 $27.50 $20.05 $17.18 $26.50 $22.71 12 mil, smooth finish, 12”length 8, 9, 10 20 mil, smooth finish, 12” length 9, 10 $58.40 $50.05 $81.73 $70.05 Silver Shield® Glove 2.7 mil., lightweight, flexible laminate material. Resistant to over 280 different chemicals, including alcohols, aliphatics, aromatics, chlorines, ketones and esters. Does not contain chemical accelerators that can cause allergic reactions. Sold per pair. $139.00 $68.50 Sold per pair. Item Description Price 46831 12”, 20 mil, Fluonit $ 57.52 TopChem 345 Heavy Weight Gray 14.5”, smooth PVA glove, knit lined with a pinked cuff. Provides chemical protection of the top 12 hazardous chemicals, 3 gases and can withstand full immersion, in pure water for 2 hours without degrading. Unique water resistant outer layer allows gloves to be used in water-based solvents. Multi-Layer construction offers inner layer of neoprene with several outer layers of PVA with comfortable knit liner to absorb perspiration. • Ideal for : Metal Treatment using solvents, Cleaning of printing presses, Mixing of inks and paints, Manufacturing of resins and composite materials, and Hazardous material handling. Sizes: 7-10, Sold per pair. Item Description Price 34531 Topchem $54.63 Silver Shield®/. 4H® Sleeves An excellent choice for chemical and petrochemical laboratories, spill cleanups, hazmat control operations, photo finishing, medical laboratories and other applications. • Resistant to over 280 different chemicals, including alcohols, aliphatics, aromatics, chlorines, ketones and esters • Sleeves can be worn with gloves and/or apron to provide additional protection for the arms and shoulders Length 20”, 2.7 mil. Sizes: one size fits all. Made in USA. Sold per pair. Item Description/Size Price SSG Silver Shield Glove, 7, 8, 9, 10, 11 $4.75 132 Price 14”, 30 mil, Viton, Unlined 12” 12 mil, Viton II Smooth black, unlined glove with pinked cuff. Combines Nitrile layer and several outer layers of Fluoroelastomer to provide excellent chemical protection against acids, alkali compounds, alcohols, high aromatic solvents, aliphatics or chlorines. The green nitrile interior provides the glove with superior mechanical resistance. As the black outer Fluoroelastomer layer wears through abrasion the green inner layer will appear, indicating gloves should be replaced. • Ideal for: Metal degreasing, Petroleum refineries, Site decontamination, Cleaning Applications using hazardous solvents, Manufacturing of paints, coatings, and varnish. Viton/butyl 38-612 38-620 Description 890 892 Fluonit 468 Butyl 38-214 38-314 38-320 38-414 38-420 38-428 38-514 38-520 Item Phone: 800-MALLORY Fax: 360-577-4244 Item Description Price SSS 20” Silver Shield Sleeves-pair $13.50 WWW.MALLORYCO.COM Chemical-Resistant Unsupported Nitrile Unlined, Green, Pebble-Grip Gloves Light weight construction and hand specific design provides real comfort and protection. Provides flexibility, tactile sensitivity and dexterity. • Excellent resistance to animal fats • Comply with fda regulation • Used in light chemical applications, printing and meat and poultry processing Sold per dozen or 12 dz/case. Please Specify Size: 8, 9. 10, 11 Item Description 1-11 dz. 310R 13” 11 mil. Unlined pebble grip $15.68 12+ $13.52 Unsupported Nitrile Gloves Ideal for food processing (red meat, poultry, dairy), chemical processing (petrochemicals, oil refining), machine operations, graphic arts, battery manufacturing and maintenance 13 length, heavy-duty non-slip grip. Straight cuffs. Component materials comply with FDA regulations for food contact. Sold per dozen pair or by 12dz/case. Item Straight Cuff 1-11 dz. 5307 5308 5309 5310 5311 Size 7 Size 8 Size 9 Size 10 Size 11 $15.72 $15.72 $15.72 $15.72 $15.72 AquaKnight hand protection styles combine liquid and chemical protection with enhanced tactile sensitivity. The nitrile and neoprene styles provide waterproof protection and the latex series is splash resistant. This assortment of seamless knit liners with different polymers affords the greatest dexterity plus chemical hand protection. • Ideal for: Chemical processing, handling rough castings and steel bars, metal treatment, paint and varnish manufacturing, petrochemical and oil refining. 6942 Sold per the pair. 9685 6942 Waterproof Neoprene 65% Cotton / 35% Polyester Seamless Liner Sizes: L, XL 9685 Waterproof 13 Gauge Cotton Shell Double Dipped Nitrile Sizes: S, M, L 9697 Splash Resistant 13 Gauge Nylon Shell Fully Coated With Stretch Latex Knit Wrist 9697 Sizes: S, M, L, XL Item Description Price 6942 9685 9697 Waterproof Neoprene Double Dipped Nitrile Fully Coated Latex $7.48 $5.80 $4.25 12+ $15.12 $15.12 $15.12 $15.12 $15.12 Sol-Vex® Unsupported, Premium-Quality, Embossed Nitrile. Sol-Vex gloves are made of a high-performance nitrile compound which provides an outstanding combination of strength and chemical resistance. When exposed to aromatic and petroleum solvents, as well as caustics and animal fats, Sol-Vex gloves have proven to be a superior choice over rubber or neoprene. Sol-Vex gloves won’t swell, weaken, or degrade, and offers better protection against snags, punctures, abrasions, and cuts. Sol-Vex gloves do not promote contact dermatitis, and their component materials comply with FDA regulations for food contact. • Ideal for: chemical processing, oil refining, petrochemicals; food processing (red meat, poultry, vegetables, fruit, dairy, and canning); machining operations using cutting oil and coolants, metal fabrication; Graphic arts, printing cleanup Blue Grit® Gloves • First dip smooth rubber coating, second dip in dry granular rubber for extra grip • 100% cotton lining for extra comfort and absorption • Cut- and puncture-resistant • Made with FDA-accepted materials for use in food processing • Construction, fishing, glass handling, masonry, painting, sheet metal industry and wood working. Sold per pair or by 72/case. Please Specify Size: S or L Item Description 1-11 12+ 6850 6852 Blue Grit 10” Length Blue Grit 12” Length $3.24 $3.41 $3.11 $3.27 Sold by the pair or 144 per case. Item Description/Size 1-11 12+ 37-145 37-155 37-175 37-165 37-185 13” 11 mil., 6, 7, 8, 9, 10, 11 13” 15 mil., 7, 8, 9, 10, 11 13” 15 mil., Flock-Lined, 6, 7, 8, 9, 10, 11 15” 22 mil, 7-7.5, 8-8.5, 9-9.5, 10, 11 18” 22 mil, 7-7.5, 8-8.5, 9-9.5, 10, 11 $1.58 $1.85 $1.36 $1.59 $1.82 $1.56 $6.30 $8.83 Phone: 800-MALLORY $5.40 $7.57 PowerCoat Nitrile-Coated Gloves Provides excellent chemical and compound resistance while allowing the ultimate flexibility and dexterity. Superior protection against punctures, cuts, and abrasion make these the optimum choice for the toughest industrial jobs, including chemical handling, auto assembly, petro-chemical refining, degreasing and food processing. Supported, 26” medium weight., nitrile, yellow, elastic cuff, with rough grip. Sold per pair. Please Specify Size:M, L, XL Item Description 1-11 12+ 722 26” PowerCoat Nitrile Gloves $10.82 $9.75 Fax: 360-577-4244 WWW.MALLORYCO.COM 133 GLOVES – CHEMICAL RESISTANT NITRILE AquaKnight® Gloves POLY / COTTON – GLOVES String Knit Gloves Cotton/polyester blend provides comfort and warmth. Allows manual dexterity. Use as a glove or glove liners. String Knits Sold by the Dozen or 25 dz/case. Please Specify Size: S, M, L, XL • • • • • Reversible pattern Provides comfort and warmth Use as gloves or glove liners Color-coded hem to identify sizes Refrigerated areas, food processing, general maintenance, parts handling, shipping / receiving and automotive plants. Sold per dozen. Please Specify Size: XS, S, M, L Item Description/Size 1-11 dz. 9500 9636LM 9638LM Cotton/Poly, Regular Weight Economy Weight Light Weight $5.16 $3.00 $2.82 12+ $5.04 $2.88 $2.70 Wool Knit Liner Item Description 1-11 dz. 9616 100% Acrylic-White $7.72 12+ $7.40 Standard-weight wool/acrylic blend liner. Wool provides warmth, and acrylic ensures comfort. 4” thermal cuff keeps out cold. Sold per pair or 144/case. Sizes: Men’s Item Parade Gloves These 100% white cotton gloves are excellent for handling electronics components. Snug fitting for good dexterity. Made with three lines of raised stitching on the back. Slip-on style. Description 100WMNZ Parade Gloves 1-11 12+ $1.95 $1.85 Thermastat™ Gloves Sold per dozen. Please Specify Size: S, M, L Item Description WK18ATC Wool Knit Liner 1-11 dz. $10.36 12+ $8.93 Inspector Gloves • • • • • Dupont’s hollow-core hydrophobic polyester Greater thermal insulation Fastest evaporation rate of moisture Extra softness for non-chafing comfort Made with FDA-accepted materials for use in food processing applications • Machine wash and dry • Reversible pattern • Utilities, poultry, beef and pork processing, refrigerated warehousing, commercial fishing and commercial landscaping. Sold per pair or 300/case. One size fits all. Extremely lightweight 100% cotton inspector’s glove. Comfortable and crisp looking. Reversible pattern allows longer wear. Unhemmed. Sold per dozen. Size: Men’s only. Item Description 1-11 dz. 8600CM Inspector Gloves $3.95 Item Description 1-11 12+ 9620 9622 100% Acrylic - White 100% Acrylic - Blue $2.89 $3.24 $2.77 $3.11 12+ $3.80 ThermaKnit™ Insulator® Lightweight Thermastat Fibers The Insulator is made of Dupont®-certified Thermastat fast-wicking fibers. These unique fibers act as a hand warmer for use in cold and damp working environments. Used as a liner under gloves, the Insulator is perfect anywhere hands are subjected to cold, damp conditions. • Ideal for: utilities, handling chilled or refrigerated products, fishing industry, construction, general maintenance Winter Liner Heavy string knit, nylon and polypropylene blend, ambidextrous pattern for double wear. Large size fits most men, Small size fits most women. Retains wicking action of pure polypropylene, yet lasts longer. Sold per pair. Sold per dozen. Please Specify Size: S, M, L, XL Item Description 1-11 dz. 3272 Winter Liner, White $11.52 12+ $9.84 Item Description 1-11 12+ 78-101 78-150 Blue Insulator- One Size Fits All White Insulator- One Size Fits All $3.09 $2.80 $2.64 $2.40 WickDry® Thermo-O-Liner Ultra light weight WickDry® moves the moisture away and keeps hands dry under the most strenuous conditions. Plus the added benefit of Thermolite® gives thermal insulation and additional wicking away of moisture, blended with Lycra® for a smooth form fit. Cotton Liners 100% cotton multi purpose liners. Sold per dozen, 120/case. Size: L. Color: Natural. Item Description 1-5 dz. 72223 Large Cotton Liners - 12 doz $5.52 134 Phone: 800-MALLORY 6+ Sold per pair. Please Specify Size: S, M, L $4.97 Fax: 360-577-4244 Item Description 1-11 12+ 9995 Glove liner $10.50 $9.35 WWW.MALLORYCO.COM Brown Jersey 7800 7100 Red Head Cotton Glove Sold by the Dozen or 25dz/case. Item Description 1-11 dz. 7100 7102 7800 7802 Men’s Brown Jersey Ladies Brown Jersey Men’s Brown Jersey with dots Ladies Brown Jersey with dots $5.85 $5.85 $8.34 $8.34 12+ • Double palm canvas • Fourchette styles provide the best fit of any heavy fabric glove • Multi-purpose gloves used for light protection in warehousing, farming and logging applications Sold per pair or 120/case. Please Specify Size: S, M, L, XL $5.60 $5.60 $8.00 $8.00 Item Description 1-11 12+ 920 920E No Band Elastic Band $1.53 $1.58 $1.32 $1.36 Quality Cotton Gloves! Red Knit Wrist Available in a sturdy 12 oz cotton with a red knit wrist. Great for warm working environments where perspiration could interfere with glove quality and effectiveness. Felt-Lined Jersey Glove Brown jersey driver’s style glove with red felt lining. Slip-on cuff. Gunn pattern with straight thumb. Very comfortable. Sold per pair or 144/case. Sold by the Dozen or 25dz/case. Size: One size fits most Item Description 1-11 dz. 7900 Felt Jersey $11.52 12+ $11.04 Canvas Gloves The most economical, general-use canvas glove available! These 8- and 12-ounce gloves are a standard in any industry. Good quality and value. 8110 Sold by the Dozen. Men’s sizes. Item Description 1-11 dz. 8110 8300C 2410G 8 oz 12 oz 12 oz, Knit Wrist $5.76 $11.28 $33.72 12+ $4.80 $10.20 $28.56 Item Description 1-11 12+ 125 12 oz. (red) $1.74 $1.70 WHITE OX 1014 Near-leather hand safety for the price of canvas! The glove every logger and woodsman has known for over 60 years. 100% cotton; fourchette pattern (the most comfortable of glove patterns, usually only found in dress styles); double ply quilted palm equates to construction from canvas of 22-ounce thickness; 10ounce canvas smooth back; knitwrist. Fuzzy nap both inside and outside. Reconfigured index finger seam gives same protection as wrap around construction. Snug fit has the effect of reducing size by approximately 1/2 size. Gauntlet version has 5” rubberized canvas sleeve. Fast red dye for printing does not bleed. 1015 1016 Sold per pair or 120/case. Lucky Logger A true 26-ounce cotton glove! Shop and compare, most logger’s gloves are made with two 11ounce layers, but the Lucky Logger was designed with a full 18-ounce outer layer on the palm and grip, (extra thickness where you need it most) and an 8-ounce inner layer. Built to give you almost twice the wear at a very reasonable price. Extra features include a generous full cut and knuckle strap for added protection. Lucky Lites have the same great design as Lucky Logger, but with a 10-ounce outer layer on palm and grip. Sold per pair or 72/case. Item Description 1-11 12+ 4814 4810 Lucky Logger Lucky Lites $2.59 $2.48 $2.53 $2.42 Phone: 800-MALLORY Item Description 1-11 12+ 1014 1014M 1015 1016 Original Snug Fit Gauntlet Original with elastic $4.14 $4.14 $5.52 $4.41 $3.50 $3.50 $4.67 $3.74 Heavyweight . Hot Mill with Burlap . Lining (4564ML) • • • • • Straight thumb Nap-out cotton canvas Knuckle strap Burlap liner for extra heat insulation Clute pattern Sold per pair or 144/case. Item Description 1-11 12+ 9132G Heavy Weight Gloves $1.70 $1.44 Fax: 360-577-4244 WWW.MALLORYCO.COM 135 GLOVES – COTTON You won’t find a warmer or more comfortable jersey glove for such an economical price! Men’s and Ladies’ sizes. Available with or without dots, for extra gripping power and convenience. COTTON • Coated COTTON – GLOVES Badger Paw® Grip with Dots Gold Chore Gloves Great comfort at an affordable price! These 16-ounce double palm gloves with nap exposed are durable and they feel great to wear. Sold by the Dozen or 144/case. Item Description 1-11 dz. 8516 Gold Chore Gloves $14.52 12+ $12.24 Designed for use in high abrasion areas where the flexibility and breath ability of machine knit gloves. Seamless inner layer of cotton provides hand comfort and wicks perspiration away. Fingertips are reinforced. Excellent replacement for leather palm gloves being used in general industrial applications. Applications include general maintenance, handling cartons, metal parts, or small castings. Sold by the Dozen or 72/case. Please Specify Size: S, M, L, XL Item Description 1-11 dz. 9205 Heavy Weight $28.56 12+ $26.40 Black Dot Gloves Plastic dot coatings on the palms of these 10 ounce gloves provide great gripping power for using hand tools and for similar applications. Two-Sided Dot Gloves Sold by the Dozen or 25 dz/case. Item Description 1-11 dz. 8800 Black Dot Gloves $8.76 12+ $7.32 • Coated with PVC dots on two sides • Color-coded hem to identify sizes • Ideal for: automotive plants, material handling, bottling industries, package handling, farm and gardening Sold by the Dozen or 25 dz/case. Please Specify Size: S. M, L, XL. Gray in Small or Large only. Item Description 9660 2 sided, Natural 9662SM/LM2 sided, Gray, S or L only 9670LM/SMGray cotton-poly Performers Extra™ Unique coating processes provide sure gripping ability and excellent abrasion resistance for gloves that are comfortably pliable and reduce hand, arm and back fatigue. Double-side brown dot coating over cotton. Ambidextrous for added wearability. 1-11 dz. $10.08 $6.60 $7.56 12+ $8.40 $5.52 $6.36 Single-Side Dot Gloves, Coated with dots on one side Sold by the Dozen or 20 dz/case. Please Specify Size: S, M, L, XL Item Description 1-11 dz. 9650 Regular Weight - White $8.16 12+ $6.80 Sold by the Dozen or 144/case. Please Specify Size: Men’s, Ladies’, Jumbo, Youth Item Description 1-11 dz. CD5AR Standard Weight $11.40 12+ $10.20 Honey Grip Glove • Criss cross pattern - Seamless Knit • Designed for excellent dexterity and gripping power. • Coated with PVC in honeycomb pattern and can be used for Material handling, roofing, bottling, and more. Sold per dozen, 120/case. Sizes M-XL. Color:Golden yellow. Brown Dot Gloves Very popular in shake mills, this cotton/ synthetic knit glove with brown dots on both sides is comfortable and durable. Item Description 1-5 dz. 63330 Honey Comb Gripper $17.86 6+ $16.07 Sold by the Dozen or 25 dz/case. Item Description/Size 1-11 dz. 9660LD 9660SD Brown Dot, Large Brown Dot, Small $6.24 $6.24 12+ $5.28 $5.28 Gray Soft Duralon® . with Badger Paw® Grip Item 9675 Description 1-11 dz. Honey Grip $14.04 12+ $13.44 Liberty Golden Gripper 50/50 polyester/acrylic knit glove with PVC overlay on both sides. Coated thumb crotch and fingertips. Reversible pattern; fits either hand. Sold by the Dozen. Sold by the Dozen or 72/case. Please Specify Size: S, M, L, XL Item Description 1-11 dz. 8605 Single-side dotted $20.76 Phone: 800-MALLORY • Multi-purpose, reversible pattern glove features a heavy weight, seamless construction • Coated with uncured PVC in a honeycomb pattern for tackiness • Material handling, roofing, bottling, farm and gardening industries. Sold by the Dozen. Please Specify Size: S. M, L, XL Special soft Duralon yarn stretches across the hand for an exact fit without compromising hand comfort. Microdots protect 13 gauge knit fabric from abrasive objects, yet are small enough that they do not interfere with hand sensitivity to touch or feel. Breathable Duralon knit keeps hands cool in summer and warm in winter. Applications include light assembly where dexterity and manual sensitivity are desirable. Excellent for shipping and receiving departments that handle cartons and must enter data on keypads. 136 Honey Grip® 12+ $19.08 Fax: 360-577-4244 Item Description PNV104 Golden Gripper PVC Criss Cross $11.28 WWW.MALLORYCO.COM 1-11 dz. 12+ $9.24 Offer extreme comfort and sensitivity with lint-free polyamide knit liner and smooth grip, Nitrile foam coated fingertips and palm. The cellular structure of the Nitrile foam extracts perspiration for optimum comfort. Nitrile foam coated palmside and fingertips offer excellent anti-slip grip, abrasion resistance and smudge-free parts handling. Polyamide liner is 280-denier stretch knit for ultimate elasticity, breathable comfort and good durability. Hand specific design in 5 sizes for optimum fit. Launderable. Medium Weight and Color: Gray knit wrist w/green. • Applications: Assembling Mechanical Components, Small Gearing, Nuts, Bolts, Fastenings, Precision Assembly Sizes: 6-10. Sold per pair, 100 pairs per case. Item Description Price 55441 554 Ultrane $2.43 562 ULTRANE Grip gloves Feature an expanded contact area for exceptional abrasion resistance and improved grip particularly in wet applications. Medium thickness, good general purpose glove. Knit wrist, with raised dots for dependable grip. Reinforced raised dot Nitrile foam finish on palmside and fingers (including knuckles) offer excellent anti-slip grip, abrasion resistance parts handling. Polyamide liner is 280-denier stretch knit for ultimate elasticity, breathable comfort and good durability. Hand specific design in 5 sizes for optimum fit. Launderable. Color: Gray w/Black. • Applications: Precision Mechanics with dry or slightly wet (oily) applications, Sorting Mechanical Parts. Maxx-Grip Glove Rubber Coated - Seamless Knit Good general purpose glove with triple dipped palms. • Textured rubber grip over seamless poly/ cotton knit • Breathable stretch knit wrist and back for comfort • Contour fit for excellent dexterity and gripping power • Rubber palm for puncture, wear and liquid protection • Machine Washable Sold per dozen, 72/case. Sizes: S-XL. Item Description 1-5 73349 73347 Black Maxx Grip Blue Maxx Grip $22.08 $22.08 6+ $19.87 $19.87 Thermo Mega-Grip Glove Rubber-Coated - Insulated - Seamless Knit Warm cotton knit glove with triple dipped palms. • Textured rubber grip over seamless warm cotton knit • Breathable stretch knit wrist and back for comfort • Contour fit for excellent dexterity and gripping power • Rubber palm for puncture, wear and liquid protection • Ideal for cold weather or padded glove applications • Machine Washable Sold per dozen, 120/case. Sizes: S-XL. Item Description 1-5 73373 Black & Gray $34.80 6+ $31.32 Sold per pair, 100 pairs per case. Item Description Price 56241 562 Ultrane $3.03 Nitri-Dex Glove Nitrile Coated - Seamless Knit Contour fit for excellent dexterity and gripping power. • Textured nitrile palm over seamless nylon knit • Breathable stretch knit wrist and back for comfort • Contour fit for excellent dexterity and gripping power • Nitrile palm for puncture, wear and liquid protection • Machine Washable ULTRANE 548 Black Nylon knitted gloves with palm and fingers coated with black polyurethane foam. Curved fingers and contoured palm. Guaranteed silicone-free. Elastic knitted wrist (natural rubber elastic wrist band). Textured external surface. Excellent abrasion resistance, comfortable seamless knit liner. • Applications: Intricate assembly work, sorting small components, handling microprocessors, electronics. Sold per dozen, 120/case. Sizes S-L. Color-Sage Green & Gray or Black & Gray Sizes S-XXL. Different color cuff for each size. Sold per pair, 98 pairs per case. Item Description Price 54839 548 Ultrane $1.65 Phone: 800-MALLORY Item Description 1-5 73376 73361 Black & Gray Sage Green & Gray $22.80 $22.80 Fax: 360-577-4244 WWW.MALLORYCO.COM 6+ $20.52 $20.52 137 GLOVES – COATED COTTON 554 ULTRANE gloves Coated COTTON – GLOVES These gloves fit comfortably on relaxed hands. Flexible coatings allow freedom of movement and reduce hand fatigue. The knit liners are seamless - no lumps or seams to rub and irritate hands. The materials and production techniques give an outstanding grip, comfort, and flexibility. Atlas Gloves offer superior hand protection for every job. All Atlas gloves are machine washable. 300 Original Latex Palm The original has all the proven design and quality features - ergonomic fit, outstanding grip, wet or dry. Available in a wide variety of sizes to ensure a comfortable fit for everyone. 300-I ThermaFit™ Thick napped liner for comfort & warmth! The ThermaFit is a truly durable, comfortable work glove. The thick poly cotton/acrylic liner uses a revolutionary napping process to cushion and keep hands warm while allowing maximum flexibility and comfort. Specially textured palm provides a great grip, and the ergonomic design reduces hand fatigue. 350 NitrileFit™ Increased puncture and abrasion resistance. The same ergonomic design and superior fit found in this Atlas 300 with the added protection of nitrile palm coating. Specially formulated nitrile coating provides increased puncture and abrasion resistance with excellent grip. Grease and oil resistant palm and fingertips. 370 Nitrile Tough™ Tough and durable lightweight gloves. The flexible nitrile coating is tougher than rubber, protecting palms and fingertips from the rigors of every day work. Seamless lightweight black nylon knit liner increases comfort while it repels dirt and stains. Ideal for jobs requiring maximum dexterity and freedom of hand movement without the fatigue associated with heavier, bulkier gloves. Sold per pair or 144/case. Please Specify Size: S, M, L, XL Item Description/Color 1-11 12-71 72+ 300 300I 350 370 Original Latex Palm, Blue Thermal Latex Palm, Gray Nitrile Palm, Green Nitrile Palm, Gray $3.50 $3.80 $3.79 $3.90 $3.30 $3.50 $3.38 $3.49 $2.85 $3.00 $3.01 $3.12 Rubber Dipped Knit Glove Black poly/cotton knit shell is comfortable and breathable for extended wear. Dipped, natural-rubber coating aids in abrasion and puncture resistance. Outstanding grip in both wet and dry applications. Sewn-on Harley-Davidson® Bar and Shield logo patch. Sold per pair. Please Specify Size: S, ML and XL ©2006 H-D, All rights reserved. Manufactured by Bacou-Dalloz under license from Harley-Davidson Motor Company. Not intended for use when riding a motorcycle. Improper use may result in serious personal injury or death. Item Description 1-11 12+ HDG200 Black poly $3.60 $2.52 Flex-Tuff® Latex Dipped String Gloves • Maximum flexibility for comfort and fit • Natural rubber provides abrasion resistance • Textured palm dip for extra grip and durability • Material handling, glass handling operations, fishing and plywood industries, sanitation, general maintenance. Sold per pair or 144/case. Please Specify Size: S, M, L S, M, L, XL Item Description 1-11 12+ 9680 Blue Latex palm & fingers $3.04 $2.92 Economy Flex-Tuff® II Latex Dipped String Gloves • Latex dipped strings & cotton/polyester shell • Textured latex palm dip Sold per pair or 144/case. Please Specify Size: S, M, L, XL Item Description 1-11 12+ 9688 Gray Textured Latex palm dip $1.65 $1.58 Skinny Dip® Seamfree cotton/poly shell with wrinkle finish flat dipped natural-rubber coating. Truly outstanding dexterity, and greater comfort with the added benefit of an ergonomic design. This general-purpose glove can be used in most applications. Wrinkle finish, flat dipped natural rubber, knitwrist, cotton/poly shell. Economy Latex Palm Sold per pair. Please Specify Size: S, M, L S, M, L, XL Item Description 1-11 12-71 72+ 3811 Skinny Dip $2.06 $1.96 138 Phone: 800-MALLORY • Cotton/Polyester shell • Choose from 10 or 13 gauge weights • Palm and fingers dipped for greater durability Sold per pair or 240/case $1.65 Fax: 360-577-4244 Item Description 1-11 12+ 9681 9682 Green 10 Gauge Blue 13 Gauge $0.80 $0.98 $0.77 $0.94 WWW.MALLORYCO.COM UltraTech™ Work Gloves • • • • • • Innovative Purple Nitrile gloves deliver 25% better productivity versus leather for general-purpose use. Exclusive nitrile foam coating provides the highest abrasion resistance rating. Perfect for small parts assembly, auto assembly, materials handling, warehouse activities and general maintenance. • Seamless knit nylon liner improves dexterity • Abrasion resistance rating of 4 (EN Standards) • Excellent dexterity • Black & purple color hides oil and dirt Good to excellent tactile sensitivity Excellent comfort and fit Cut and abrasion resistance 100% nylon shell Polyurethane palm and fingers dip Ideal for: assembly, low lint protection, manufacturing, small parts handling, general purpose Sold per pair or 144/case. Please Specify Size: S, M, L XS, S, M, L, XL Item Description 1-11 12+ 9696 Gray Polyurethane $2.87 $2.75 Sold per pair. Item Purple Nitrile 1-11 12+ 40225 40226 40227 40228 40229 Size 7 (S) Size 8 (M) Size 9 (L) Size 10 (XL) Size 11 (XXL) $3.45 $3.45 $3.45 $3.45 $3.45 $3.17 $3.17 $3.17 $3.17 $3.17 HyFlex® Foam gloves The outstanding oil grip you need with the increased comfort you want. • The dark foam nitrile coating effectively hides soil, lengthening the time between glove replacements. Perfect for any job requiring workers to handle small, oily parts. Sold per pair or by 72/case. Available in sizes: 6, 7, 8, 9, 10, and 11. G40 Latex Coated® Gloves Designed for excellent durability in the work environment, these general-purpose poly-cotton latex-coated gloves are processed to yield lower latex proteins. An excellent value, they offer good grip and great comfort and dexterity. They excel at use in masonry, general maintenance, materials handling, warehousing and shipping. Item Description 1-11 12+ 11-800 11-801 HyFlex Gray Foam Nitrile Gloves $4.28 HyFlex Black Foam Nitrile Gloves $4.28 $3.67 $3.67 HyFlex® Lite Sold per pair. Item Gray-Black Latex 1-11 12+ 97270 97271 97272 97273 97274 Size 7 (S) Size 8 (M) Size 9 (L) Size 10 (XL) Size 11 (XXL) $2.33 $2.33 $2.33 $2.33 $2.33 $2.14 $2.14 $2.14 $2.14 $2.14 PowerFlex® Where dexterity is the key factor, HyFlex Lite is the perfect choice. Ideal for the electronics industry, and computer assembly. Sold per pair or by 72/case. Available in sizes: 6, 7, 8, 9., 10 Item Description 1-11 12+ 11-600 HyFlex® Lite Gloves $2.63 $2.26 Hynit® Cut-, Abrasion-, and Puncture-Resistant; Poly/Cotton Knit Liner The Quality Choice in Light- to Medium-Duty Gloves PowerFlex gloves provide a combination of cut, abrasion, and puncture resistance; superior wet and dry grip; and unbelievable comfort. The gloves are ergonomically designed with a soft gray; seamless poly/ cotton knit liner that’s palm-dipped with a textured, natural rubber coating. The uncoated back allows air to circulate, which keeps hands cooler and drier, and the fully coated thumb provides added protection in this high-risk area. • Ideal for: general maintenance, shipping & receiving, assembly, concrete & brick handling and lumber handling Sold per pair. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL) Caution: This product contains natural rubber latex, which may cause allergic reactions in some individuals. Item Description 1-11 12+ 80-100 Seamless poly/cotton knit lining; dipped in textured natural rubber $2.77 $2.37 Phone: 800-MALLORY Knit-Lined, Dipped, Color-Coded Cuff A comfortable, longwearing replacement for cotton or leather gloves. Made from a longwearing nitrile-impregnated fabric, which provides excellent snag, puncture, abrasion, and cut resistance. Hynit gloves outwear 8-ounce cotton by as much as 10 to 1, goatskin by 3 to 1, and light leather by 4 to 1. The gloves feature superior dry grip, no silicone, and are light and comfortable to wear. Fully launderable, with color-coded cuffs to simplify sorting and storage. •General plant use • Assembly and inspection • Receiving • Light-to-medium fabrication • Materials handling. Sold per pair or 144/case. Please Specify Size: 6.5 (Women’s S), 7 (Women’s M), 7.5 (Women’s L), 8 (Men’s M), 9 (Men’s L), 10 (Men’s XL) Item Description 1-11 12+ 32-105 32-125 32-135 Slip-on Perforated Back Panel - Slip-on Nylon Mesh Back - Slip-on $2.47 $2.59 $2.75 $2.11 $2.21 $2.35 Fax: 360-577-4244 WWW.MALLORYCO.COM 139 GLOVES – Coated COTTON G40 Purple Nitrile® Foam Coated Gloves Coated COTTON – GLOVES Palm-Coated Heavy Nitrile Driver’s style glove. Features an elastic, striped back to provide excellent cut, puncture, snag and abrasion resistance. Suggested applications: metal fabricating and grinding, or handling abrasives. Nitri-Pro™ Gloves Sold per pair or by 72/case. Please Specify Size: S, M, L, XL Supported Nitrile Nitri-Pro is an economical replacement for heavy-duty leather palm work gloves, and is available rough finished for a good wet grip and extra wear or smooth finished for a good dry grip and more flexibility. Features triplelayer foam insulation. Suggested applications: handling rough castings, cores, extrusions, tubular steel, sheet metal, fabricated metal, lumber, plywood, drywall, concrete blocks, bricks, and general building materials. 21CFR, 170-199 compliant. Sold per pair or by 72/case. Please Specify Size: S, M, L. Item 7066R available in M, L only. Item Description 1-11 12+ 7066 7066R Smooth Palm, Safety Cuff Rough Palm $4.25 $4.25 $3.49 $3.49 Item Description 1-11 12+ 9740 Heavy Nitrile, jersey-lined driver $5.35 $5.12 Nitty Gritty™ Gloves The most cut resistant, comfortable, premium value glove of its class. Multi-dipped, premium natural-rubber coating gives you superior cut, abrasion, snag and puncture resistance and extended wear. Suggested applications: sharp edged objects, like glass, sheet metal, scrap metal or tin plate, slippery or smooth materials, or abrasive objects like lumber, tile, concrete blocks and brick. 21CFR, 170-199 compliant. Sold per pair or by 72/case. Item Predalite® Lightweight Nitrile Description/Size 1-11 12+ $4.40 $5.17 $5.92 $6.38 $4.40 $4.40 $4.70 $3.62 $4.25 $4.86 $5.25 $3.62 $3.62 $3.86 Wrinkle Finish 63NFW 64NFW 65NFW 67NFW 63PNFW L63PNFW 66NFW Lightweight nitrile (NBR) rubber coating for cut, abrasion, snag and puncture resistance. Thinner coating on 100% cotton interlock lining for a greater sense of touch and dexterity. Palm-coated with knit wrist. • Ideal for: light to medium fabrication, material handling, and maintenance. Knit Wrist, Fully Coated, Large 10” Gauntlet, Fully Coated, Large 12” Gauntlet, Fully Coated, Large 14” Gauntlet, Fully Coated, Large Knit Wrist, Palm Coated, Large Knit Wrist,Palm Coated, Small Safety Cuff, Palm Coated, Large Sold per pair or by 72/case. Please Specify Size: XS, S, M, L, XL Item Description 1-11 12+ 9780 LightWeight, Knit Wrist $2.23 $2.14 • Rough-textured natural-rubber coating for greater gripping power and a higher degree of cut resistance • Crinkle finish • Ideal for: handling of sharp-edged materials such as glass or metal, or highly abrasive items, such as concrete blocks or lumber. Hylite Ruggedness and Comfort for Medium-Duty Applications Sold per pair or by 72/case. Size: Men’s Large Hylite combines the comfort of a cotton lining and the exceptional snag, puncture, abrasion, and cut resistance of a nitrile coating in a medium-duty glove. The glove is a better alternative to cotton, light- to medium-duty leather, and PVC. For extra comfort, Hylite features an interlock knit lining, generous sizing, and a contoured design. Hylite gloves outwear cotton up to 12 to 1, light leather 5 to 1, and PVC-coated gloves 3 to 1. • Ideal for: assembly, inspection, medium-duty material handling, light fabrication, shipping and receiving and maintenance Sold per pair. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL) Item Description 1-11 12+ 47-400 47-402 47-409 Palm coated, knitwrist Fully coated, knitwrist Fully coated, 4” w/ nitrile cuff $3.34 $3.42 $4.10 $2.86 $2.93 $3.51 140 Phone: 800-MALLORY TuffTex® Work Gloves Item Description 1-11 12+ 6820 6845 Cotton Canvas Shell 12” Gauntlet $3.52 $2.66 $3.38 $2.55 Whizz-knit™ Seamless knit liner supported vinyl coated gloves Porous textured coating for breathability and easy gripping. Minimizes absorption of water, oil and grease. Versatile glove for hand protection in small parts handling, construction, electronics assembly, shipping, receiving, assembly, maintenance, light fabrication, inspection and packaging. Sold per pair or 120/case. Please Specify Size: XS, S, M, L Fax: 360-577-4244 Item Description 1-11 12+ 9891 Whizz-knit™ $2.34 $2.24 WWW.MALLORYCO.COM