M How To Error Proof Your Manual Assembly, Kitting and Fulfillment Processes

asb0306HowToC.qxd
02|07|06
16:08
Page 30
Advertisement
Q u a l i ty
How To
Error Proof Your Manual Assembly,
Kitting and Fulfillment Processes
ost of us have heard the statement, “To err is
human,” time and time again. Be it said by
Alexander Pope, Benjamin Franklin or Mae
West, it never ceases to be true. However, to have
an efficient operation it is crucial to have systems in
place that limit the opportunity for human error.
Nearly all manual assembly, kitting and fulfillment
processes could benefit from and eliminate many
of these type mistakes by utilizing some form of
Pick-to-Light System.
M
Consequences of Not Using Pick-to-Light
Increased training time, rework cost and lost market
share are among several negative impacts a company not using pick-to-light systems could face.
Increased Training Time
Training production personnel can be very expensive. Time really is money. Having pick-to-light systems in place can often turn multiple hours of initial
supervised training time into minutes.
Rework Cost
Rework costs have labor, materials and inspection
cost associated with it. Products that fail inspection
often have to be disassembled, repaired, reassembled and then quality inspected again, if they are
even repairable at all.
Lost Market Share
Excessive warranty situations can lead to loss in
business and market share. The customer is the
final quality check. The worst business situation
for any company is bad product delivered to the
customer. Oftentimes, you may not ever hear
from a dissatisfied customer, they simply make the
decision to go with a different product or vendor;
a cost that is nearly impossible to quantify.
30
M A R C H 2 0 0 6 ASSEMBLY • How-To Guide
02|07|06
16:08
Page 31
Q u a l i ty
asb0306HowToC.qxd
Steps to
Pick-to-Light
Implementation
Identify Your Most
Problematic Area
Higher volume workstations or lines,
especially those that are used to build
several different models of a product,
typically can benefit the most from pickto-light sytems.
Organize & Consolidate
Eliminate loose boxes and assign
specific locations for each part/bin in a
rack or shelving system.
Select & Install
Overall dimensions of the picking
area, number of rows, bins, operators,
assembly variations and bin sizes
should be considered. Applications with
numerous small to medium sized bins
and assembly variations are typically
best suited for the Smart Frame™.
Scenarios with larger parts, bins or
skids can be accommodated most
efficiently with a Smart Gate XL™
system. And the Smart Bin™ is
designed for batch builds with a small
number of small to medium sized parts.
Enjoy
Increased Productivity
Improved Quality
Reduced Use of Paper
The Virtually Elimination of Missing
or Incorrect Parts
Six Sigma Cost Savings
eInquiry 308
How–To Guide • www.assemblymag.com M A R C H 2 0 0 6
31