AD-Merkblätter – Series B

Local load calculations due to external loadings
(nozzles, pads, brackets, ...)
q WRCB 107
q WRCB 107
q WRCB 297
Local stresses in cylindrical shells
Local stresses in spherical shells
Local stresses in cylindrical shells
Price integrated in a Base Module as add. Calculation Solver
(Report Generator included)
excl. VAT (Sterling)
€ 1900
Stand alone Calculation Solver with according
Report Generator
excl. VAT
€ 1500
Shell and tube heat exchanger: TEMA Pack
q TEMA
Mechanical Design for TEMA class R, C and
B heat exchagers based on the component types of Figure
N-1.2 and the design rules of Section 5
Package price as Base Module with according
Report Gemerator
excl. VAT
€ 3300
Stand alone Calculation Solver with according
Report Generator
excl. VAT
€ 2100
AutoCAD integrated version
BS 5500 Advanced Package
q 3.8 Bolted flanged connections
q
Narrow-faced gasketed flanges
q
Full faced flanges with soft ring type gaskets
q
Ungasketed seal welded flanges
q
Reverse narrow-face flanges
q
Reverse full-face flanges
q
Full-faced flanges with metal to metal contact
q 3.9 Flat heat exchanger tubesheets
q With floating heads or U-tubes
q Fixed tubesheet exchangers
q Allowable shell and tube longitudinal stresses
q Allowable tube joint end load
q 3.11 Jacketed construction
Starting the integrated version of WIN_SHELL in AutoCAD
will produce no differences in screen organization, style and
behaviour.
All drawings are based on the AutoCAD specific functions –
but still under control of WIN_SHELL and the Configuration
Editor. Thus all drawing information (hierarchies, layers, …)
are available to enhance the details in the drawing.
Upgrade price for integration of WIN_SHELL
in AutoCAD
excl. VAT
€ 1900
AD-Merkblätter – Series B
q
q
q
q
q
Advantages of the 3D Drawing module
To get a feel for the vessel – the clearances between
components and the bottlenecks, the shape of nozzles with
offset, … - the 3D Drawing is the most effective tool.
Ø Pick up clearances important for the plant design (distance
from flange to nozzle, )
Ø Study details like intersection curves based on solids
Ø Prepare the 3D diplay of the vessel for later use in the plant
design tool
Ø Control of nozzle insertion points and transition coordinates with aspect to the global plant co-ordinate system
Ø…
q
q
Price 30% of the Base Module (enhanced) configuration with
one Code of Practice
excl. VAT
minimum € 1200
q
q
q
Same vessel configuration but different Code of Practices
Dependent on the Codes of Practices integrated in the software
package it is – based on the given vessel configuration – up to
the user to perform the mechanical design calculations for a
single Code of Practice or for all integrated ones in one step.
So it is possible to optimize the construction to meet the
requirements of all Codes.
BS 5500 Base Module: Vessels under int./external pressure
q 3.5.1/4 Cylindrical/spherical shells with openings
q 3.5.2/4 Domed ends with openings
q 3.5.3/4 Conical sections with openings
q 3.5.5 Flat ends and flat plates
q 3.5.6 Spherically domed and bolted end
q 3.6
Vessels under external pressure
Price for Base Module BS 5500 (Report Generator included)
excl. VAT
€ 5100
Stability verification of pressure vessels based on
the S series (special cases) of the ADM Code
Fig.2:
Sample of a vessel optimized with the geometry control
features of the 3D Drawing tool
BS 5500 Annex G: Local stresses due to external loading
q in spherical shells (nozzle pads and reinforcing plates included)
“
“
“
)
q in cylindrical shells(
q supports and mountings for horizontal vessels
Price integrated in a Base Module as add. Calculation Solver
(Report Generator included)
excl. VAT
€ 2200
Stand alone Calculation Solver with according
Report Generator
excl. VAT
Stand alone Calculation Solver with according
Report Generator
excl. VAT
2300
B1/B9 Cylindrical/spherical shells with openings
B2/B9 Conical sections with openings
B3/B9 Formed heads with openings
B4
Bolted heads
B5
Flat ends and plates
q
Flat ends/plates with/without marginal moment
q
Tubesheets with flanged extension
q
Round fixed tubesheets
q
Round U-tube tubesheets
q
Round floating tubesheets
q
Round tubesheets (fixed with expansion joint)
q
Flanged extensions of tubesheets
B6
Shells under external pressure
B7/B8 Flange connections (DIN V2505 included)
q
Slip on flanges
|
q
Welding neck flanges
| with/without
q
Loose type flanges
| calculation
q
Full faced flanges
| of bolts
q
Reverse flanges
|
B9
Reinforcement of adjacent openings
B10 Thick walled cylinders
B13 Single/multiple-ply bellows expansion joints
Package price for Base Module with according Report
Gemerator
excl. VAT
€ 8200
Price as integrated Calculation Solver for an
additional Code of Practice (Report Generator included)
excl. VAT
€ 5600
Stand alone Calculation Solver with according
Report Generator
excl. VAT
€ 5100
Price integrated in a Base Module as Calculation Solver for an
add. Code of Practice (Report Generator included)
excl. VAT
€ 2500
€
900
Note: Requests for integration of WIN_SHELL in other
CAD-systems are welcome.
Price integrated in a Base Module as Calculation Solver or for an
add. Code of Practice (Report Generator included)
excl. VAT
€ 3500
Stand alone Calculation Solver with according
Report Generator
excl. VAT
€
WIN_SHELL Price List and Sample Packages
€ 1800
Page 2
The AD-Merkblätter offer a variety of design facilities for
support elements and their influence on the pressurized wall as
no other Code of Practice.
These tools may also be used in combination with ASME
design calculations based on the ASME materials.
According to BS 5500 calculations the AD-S3 tools can be
used in an analogous way.
For load cases like testing, installation, emergency conditions
etc individual safety coefficients will be taken into account.
The principles (load case classification, criteria for snow and
wind loads etc, safte coefficients, superposition of loads for
necessary approvals …) are described in AD-S3/0
AD-Merkblätter – Series S
(local stresses in vessel wall & support elements)
q
q
q
q
q
q
q
S3/0
S3/1
S3/2
S3/3
S3/4
S3/5
S3/6
Basic Principles (load evaluation not included!)
Vessel on plinths (skirt support)
Horizontal vessels on cradles (saddle support)
Vessels with dished ends on feet (leg support)
Vessels with supporting lugs (brackets)
Vessels with toroidal support
Vessel with connections under additional load
Price as integrated Calculation Solver for an
additional Code of Practice (acc. Report Generator included)
excl. VAT
€ 8900
Stand alone Calculation Solver with according
Report Generator
excl. VAT
€ 5100
Load evaluation according to AD-S3/0
and additional guidelines
This package covers the evaluation of wind, filling, working
and dead loads under internal and external pressure (vacuum).
The pressure, forces and moments as result of the different
load types are listed for critical locations (lowest point of each
round, transition from pressurized vessel wall to skirt, base
ring …) and summed up with aspect to different types of
approvals.
For special load cases (for example ‘testing‘) special rates of
loads (for example only 20% of the working load) can be
defined.
For characteristic sections (transition from pressurized vessel
wall to skirt, base ring …) the loads (pressure, forces,
moments) are automatically transferred to concerning design
tools of the AD-S series (S3/1 to S3/5)
Price as addition to the AD-S3 series with Report Generator
and automatic load transfer
excl. VAT
€ 5600
Environmental loadings resulting in forces and
moments, displacements, natural frequencies …
In addition to the ‘load evaluation acc. to AD-S3/0 …’, where
columns are handled as fixed beams, the user is free to define
the support structure.
The analysis of displacements, forces, moments and natural
frequencies are done on a Finite Element basis (beams).
The evaluations are a preprocessor step for wind/earthquake
approvals according to the methods of the AD-S3 series.
Price as addition to the AD-S3 series with Report Generator
and automatic load transfer
excl. VAT
€ 5100
Office-Word-Interface by OLE Automation
Text results of the list generator and the calculation engine
(mechanical design documentation) can automatically be
transferred into MS Word for Windows.
So the user can
Ø enhance the tables by comments
Ø bring in further results
Ø use the tables for working out form sheets
Ø …
Price as addition to a Base Module or Stand alone Calculation
Solver
excl. VAT
€ 250
WIN_SHELL Price List and Sample Packages
Page 3