LEB Lantern ERA® 19" PicoEmitter™ LED

LEB Lantern ERA® 19" PicoEmitter™ LED
Medium Housing, Bottom Mount, Single Straight Arm
9/23/14 • kl_leb19sseled_spec.pdf
Type:
Job:
Catalog number:
Approvals:
Options
/ / /
Fixture
Mtg.
Electrical Module
Finish
See page 2
See page 3
Pole and Arm
Select pole from Kim Arms and Poles Selection Guide
If pole is provided by others indicate O.D. for arm fitting.
Specifications
LEB19SS - Medium
Bottom Mount
Single Straight Arm
60 LEDs
19" DIA.
(482.6 mm)
1011⁄32"
L"
(19.1 mm)
(262.4 mm)
25A"
(636.6 mm)
12K"
11"
(317.5 mm)
(279.4 mm)
3L"
(95.3 mm)
9"
4J"
(108.0 mm)
(228.6 mm)
4"
(101.6 mm)
2L"
(69.9 mm)
LEB Bottom Mount Adapter
for mounting to arms
SS
Single
Straight Arm
Date:
Page: 1 of 6
Housing: One-piece, die-cast low copper (<0.6% Cu) aluminum alloy
components with integral cooling fins.
Lens Frame: One-piece, die-cast low copper (<0.6% Cu) aluminum
alloy. Stainless steel hinges provided for attachment to housing. The F"
thick clear flat tempered glass lens seals against the EmitterDeck® flange
with a one-piece silicone gasket.
Hub: Die-cast, low copper (<0.6% Cu) aluminum alloy with
die-cast access cover. Hub is used to support the arm components
and for overall support of the luminaire and provides field wire
access. Mounting is to a single pole or a tenon mount for poles by-others.
A sand-cast adaptor casting is provided when HA-Arms are specified.
Lantern Arm: Single Straight, die-cast, low copper aluminum
alloy supports the housing and provides access for wiring. Optional trims
are available to compliment the arm styling.
Electronic Module: All electrical components are UL and CSA
recognized, mounted on a single plate and factory prewired with
quick-disconnect plugs. Module includes a driver, LifeShield ®
temperature control device and surge protector. Electrical module
attaches to housing with no-tool hinges and latches, accessible by
opening the lens frame only. Driver is rated for -40°F starting and has a
0-10V dimming interface for multi-level illumination options..
Optical Module: Precision, replaceable PicoEmitter reflectors are
positioned to achieve directional control toward desired task. The entire
EmitterDeck mounting assembly fastens to the housing as a one-piece
module.
Mounting: The fixture is equipped for flush mount (FM), Pole Tenon
Mount (PT), or as an arm mount.
Finish: Each luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat finish. Standard colors include (BL) Black, (DB) Dark Bronze, (WH)
Era
White, (PS) Platinum 19"
Silver,
(SG)Lantern
Stealth Gray, (LG) Light Gray, and (CC)
Custom Color (Include RAL#).
Listed To: UL 1598 Standard for Luminaires - UL 8750 Standard for
Safety for Light Emitting Diode (LED) Equipment for use in Lighting
Products and CSA C22.2#250.0 Luminaires.
CAUTION: Fixtures must be grounded in accordance with national,
state and/or local electrical codes. Failure to do so may result in serious
personal injury.
Kim Lighting reserves the right to change specifications without notice.
© 2014 KIM LIGHTING INC. • 16555 EAST GALE AVENUE, City of Industry, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/968-5716
LEB Lantern ERA® 19" PicoEmitter™ LED
Medium Housing, Bottom Mount, Single Straight Arm
9/23/14 • kl_leb19sseled_spec.pdf
Type:
Job:
Page: 2 of 6
Standard Features
Mounting
Plan View:
Cat. No.: l FM
l PT
l 1SA
l 2SB
l 3SY
l 4SC
l 1W
Wall
Mount
NOTE: FM Flush Mount for direct mounting to top of pole. 3C", 4", 5", and 6" available.
PT Pipe Tenon Mount for poles by others where a tenon is supplied. 2" pipe (2C" x 4"
length). 1SA, 2SB, 3SY and 4SC Side Mount orientation using the arms in the Kim Arms
and Poles Selection Guide. 1W Single Wall Mount configuration using the arms and wall
plates in the Kim Arms and Poles Selection Guide. 1W Wall Mount arm is not included and
must be ordered separately. See page 5 for styles and ordering information.
LEB
Fixture
19
Housing:
LEB
SS
x
E35
Light Distribution:
E35 =350mA
Distribution:
TYPE I Type
TYPEIIII TYPE II TYPE IITYPE
Type
TYPE IV
TYPE I Type I TYPE
II II
TYPE III
l 1 = Type I Full Cutoff
TYPE
TYPE
TYPE
TYPE ITYPE I
TYPETYPE
II II
TYPE
III III
Size:
l 2 = Type II Full Cutoff
19 = 19” Small
l 3 = Type III Full Cutoff
60 LEDs
l 4 = Type IV Full Cutoff
l 5 = Type
V Square Full
Cutoff
SS = Single
TYPE
TYPE
TYPE
I
Type
V LV Type
TypeRL TYPE R
TYPE LR TYPE
TYPE
TYPEType
IV IV TYPE
TYPETYPE
I
TYPETYPE
II II
TYPETYPE
III III
R V
Straight
One-Way
Right
l L = Type L Left Full Cutoff TYPE L TYPE
One-Way
LeftRight
TYPEOne-Way
R
L
Righ
Left
Forward
Square
LeftOne-Way
One-Way Right
One-Way Left
Arm
One-Way
One-Way
Left TYPE
R Right
L
l R = Type R Right Full Cutoff TYPE
Throw
Electrical Module
One-Way Left
Cat. Nos. for Electrical Modules available:
60L
xK
TYPETYPE
R R
TYPETYPE
L L
One-Way
One-Way
RightRight
One-Way
Left LeftOne-Way
Source:
60L = 60 LED’s
1
Color Temperature:1
l 2K = 580nm - Amber
l 3K = 3000K
l 4K = 4200K
l 5K = 5100K
One-Way Right
x
Voltage:
l 120 = 120V
l 208 = 208V
l 240 = 240V
l 277 = 277V
l 347 = 347V1
l 480 = 480V1
Due to current unavailability of 347V and 480V drivers, specification of these voltages may feature an
integral step-down transformer.
Finish
TGIC powder coat
Color: Black
Cat. No.: l BL
Dark Bronze Light Gray Stealth Gray Platinum Silver White
l DB
l LG
l SG
l PS
l WH
Custom Color2
l CC
Custom colors subject to additional charges, minimum quantities and extended lead times.
Consult representative. Custom color description:
2
0-10V Dimming Interface
Driver has a 0-10V dimming interface with a dimming range of
10-100%. Is compatible with most control systems including Hubbell
Building Automation wiHUBB™. Approved dimmers include Lutron
Diva AVTV, Lutron Nova NFTV and NTFTV. Note: Not compatible
with current sourcing dimmers. Controls compatible via Gray and
Purple dimming lead.
Standard Input Black (+)
White (-)
Green (GND)
Gray Dimming Lead (-)
Fixture
Housing
Purple Dimming Lead (+)
30 mA Max
© 2014 KIM LIGHTING INC. • 16555 EAST GALE AVENUE, City of Industry, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/968-5716
LEB Lantern ERA® 19" PicoEmitter™ LED
Medium Housing, Bottom Mount, Single Straight Arm
9/23/14 • kl_leb19sseled_spec.pdf
Type:
Job:
Page: 3 of 6
Optional Features
Leaflet
Cat. No. l LEAF
l No Option
Heavy cast aluminum leaflets on top and bottom of
luminaire arms. (SS) only.
Finial
Cat. No. l TF
l No Option
Heavy cast aluminum finial on top of lantern housing. For use
with Bottom Mount (BM) luminaire only.
Photocell
Cat. No. (see right)
l No Option
Factory installed photocell inside housing with a fully gasketed
sensor on the side wall.
Cat. No.
l A-30
l A-31
l A-32
Line Volts:
120V
208V
240V
Cat. No.
l A-33
l A-35
l A-34
Line Volts:
277V
347V
480V
Photocell Sensor
Fusing
Cat. No. (See right)
l No Option
High temperature fuse holders factory installed inside the fixture housing.
Line Volts: 120V
208V
240V
277V
347V
480V
Cat. No.:
l SF
l DF
l DF
l SF
l SF
l DF
Poles
See Kim Lighting’s Arms and Poles Selection Guide.
Time Clock Relay
Cat. No. l TCR
l No Option
Time Clock Relay - An intergral relay and dimming circuit is provided at the voltage of the
luminaire for contact from a time clock by-others. The Time Clock tells the relay to switch to
50% dim.
© 2014 KIM LIGHTING INC. • 16555 EAST GALE AVENUE, City of Industry, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/968-5716
Single Fuse
LEB Lantern ERA® 19" PicoEmitter™ LED
Medium Housing, Bottom Mount, Single Straight Arm
9/23/14 • kl_leb19sseled_spec.pdf
Type:
Job:
Page: 4 of 6
Optional Features
Round Pole-Mounted
Occupancy Sensor
up to 16'
Cat. No. l SCL-R
l No Option
Square Pole-Mounted
Occupancy Sensor
up to 16'
Cat. No. l SCL-S
l No Option
Round Pole-Mounted
Occupancy Sensor
up to 30’
Cat. No. l SCH-R
l No Option
Round Pole Mounted Occupancy Sensor up to 16’ - Outdoor occupancy sensor with 0-10v interface dimming control mounts directly to the underside of the luminaire. Wide 360° pattern.
Module colors available Black, Gray, and White. Module is cut for round pole mounting. Pole
diameter needed.
Ordering Example: SCL-R4*/277**/BL***
*Pole Diameter, ** Voltage, *** Color
Square Pole Mounted Occupancy Sensor up to 16’ - Outdoor occupancy sensor with 0-10v interface dimming control mounts directly to the underside of the luminaire. Wide 360° pattern.
Module colors available Black, Gray, and White. Module is cut for round pole mounting. Pole
diameter needed.
Ordering Example: SCL-L/277**/BL***
** Voltage, *** Color
Round Pole Mounted Occupancy Sensor up to 30’ - Outdoor occupancy sensor with 0-10v interface dimming control mounts directly to the underside of the luminaire. Wide 360° pattern.
Module colors available Black, Gray, and White. Module is cut for round pole mounting. Pole
diameter needed.
Ordering Example: SCH-R4*/277**/BL***
*Pole Diameter, ** Voltage, *** Color
Square Pole-Mounted
Occupancy Sensor
up to 30'
Cat. No. l SCH-S
l No Option
Ordering Example: SCH-S/277**/BL***
Wireless Control
Cat. No.  WIH-M
 No Option
In fixture WiHubb wireless control module features on/off/variable and step dimming, SNAP
protocol mesh network, AES-128 encryption detection, occupancy sensor interface and intuitive,
user-friendly software. The most comprehensive and up to date information can be found at
http://www.hubbell-automation.com/products/wihubb_infixture_module/.
Wireless Control
Cat. No.  WSI-M
 No Option
Hubbell Building Automation's wiSCAPE™ Fixture Module is a bidirectional wireless RF device
that allows an individual fixture to be managed, monitored and metered. The wiSCAPE Fixture
Modules communicates wirelessly over a robust 2.4GHz ISM (Industrial, Scientific and Medical)
certified meshed radio signal. The wiSCAPE Fixture Module drastically simplifies control and
automation of projects, especially in retrofit environments and challenges the legacy world
of wired-systems. wiSCAPE wireless control technology adapts easily to complex automation
situations for quick, simple and economical commissioning.
Square Pole Mounted Occupancy Sensor up to 30’ - Outdoor occupancy sensor with
0-10v interface dimming control mounts directly to the underside of the luminaire. Wide
360° pattern. Module colors available Black, Gray, and White. Module is cut for square
pole mounting.
** Voltage, *** Color
®
Additional information on controls can be found at http://www.hubbelllighting.com/solutions/controls/
© 2014 KIM LIGHTING INC. • 16555 EAST GALE AVENUE, City of Industry, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/968-5716
LEB Lantern ERA® 19" PicoEmitter™ LED
Medium Housing, Bottom Mount, Single Straight Arm
9/23/14 • kl_leb19sseled_spec.pdf
Type:
Job:
Page: 5 of 6
Arm Options
Note: Refer to Kim Lighting’s Arms and Poles Selection Guide for complete details. 1W Wall Mount arm is not
included and must be ordered separately.
Arms
Side Pole Swept Cast ArmSide Pole S-Shaped Up Cast Arm
Mtg.
Arm
1SA l HA11S
2SB
—
3SY
—
4SC
—
Tenon Mt.
Wall Mt.
Arm
Tenon Mt.
Wall Mt.
Arm
Tenon Mt.
Wall Mt.
l HA11S-TM1 l HA11S-W l HA12S l HA12S-TM1 l HA12S-W l HA13S l HA13S-TM1 l HA13S-W
l HA11S-TM2
——
l HA12S-TM2—
—l HA13S-TM2—
l HA11S-TM3
——
l HA12S-TM3—
—l HA13S-TM3—
l HA11S-TM4
——
l HA12S-TM4—
—l HA13S-TM4—
Side Pole/Wall Mount Ribbon Arm
w/Bottom Scroll Mtg.
Arm
Side Pole S-Shaped Down Cast Arm
Tenon Mt.
Wall Mt.
Side Pole/Wall Mount Ribbon Arm Side Pole Ribbon Arm
w/Bottom Gusset
w/Bottom Brace
Arm
Tenon Mt.
Wall Mt.
Arm
Tenon Mt.
Wall Mt.
1SA l HA32S l HA32S-TM1 l HA32S-W l HA34S l HA34S-TM1 l HA34S-W l HA36S l HA36S-TM l HA36S-W
2SB
—
l HA32S-TM2—
—
l HA34S-TM2—
—
Consult
Consult
3SY—l HA32S-TM3 —
—
l HA34S-TM3—
—
Factory
Factory
4SC—l HA32S-TM4 —
—
l HA34S-TM4
——
Arm
Finial:
HAF2 - Traditional style finial available to close off mounting hub opposite the fixture.
© 2014 KIM LIGHTING INC. • 16555 EAST GALE AVENUE, City of Industry, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/968-5716
LEB Lantern ERA® 19" PicoEmitter™ LED
Medium Housing, Bottom Mount, Single Straight Arm
9/23/14 • kl_leb19sseled_spec.pdf
Type:
Job:
Page: 6 of 6
Lumen Data
Projected Lumen Maintenance*
Spectroradiometric
Correlated Color Temp. CCT (K)
Color Rendering Index (CRI)
Power Factor
3000K Average
2800K - 3175K
80≤
>.90
4200K Average
3800K - 4600K
80≤
>.90
5100K Average
4600K - 5600K
≤70
>.90
mA
350 mA
100,000 hrs
Calculated
L70
93.33%
596,000 hrs.
Electrical Drive Current
Volts - AC
120
208
240
277
347
480
350mA
Amps - AC
System Watts
0.56
67
0.32
67
0.28
67
0.24
67
0.19
67
0.14
67
B.U.G. Rating for 350mA (TM15) in Lumens where B = Backlight, U = Uplight, G = Glare
Temperature
3000K
4200K
5100K
Type I
TBD
TBD
TBD
Type II
B1 U0 G1
B2 U0 G2
B2 U0 G2
Type III
B1 U0 G1
B1 U0 G1
B1 U0 G1
Type III NFO
N/A
N/A
N/A
Type IV
B1 U0 G1
B1 U0 G1
B1 U0 G1
Type IV NFO
B0 U0 G1
B1 U0 G1
B1 U0 G1
Type V
B2 U0 G1
B2 U0 G1
B3 U0 G1
Type L/R
TBD
TBD
TBD
Type II
3714
4822
5159
Type III
3522
4573
4892
Type III NFO
N/A
N/A
N/A
Type IV
3507
4553
4871
Type IV NFO
2951
3830
4098
Type V
3685
4784
5118
Type L/R
TBD
TBD
TBD
Absolute Lumens for 350mA
Temperature
3000K
4200K
5100K
Type I
TBD
TBD
TBD
LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim Lighting’s IES File Library.
For custom optics and color temperature configurations, contact factory.
*Data is prorated from 5000K IES files.
© 2014 KIM LIGHTING INC. • 16555 EAST GALE AVENUE, City of Industry, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/968-5716