TEPPIES Call 02-2014 Expressions of Interest Targeting HORIZON 2020 Topics:

Transcription

TEPPIES call 2-2014
HORIZON 2020 – Year 2015 WP
Topics with relevance for
textile research
TEPPIES
Call 02-2014
Expressions of Interest
Targeting HORIZON 2020 Topics:
NMP-25-2014: “Accelerating the uptake of nanotechnologies,
advanced materials or advanced manufacturing and processing
technologies by SMEs”
CS5-20-2014: Boosting the potential of small businesses for
eco-innovation and a sustainable supply of raw materials
NMP-02-2015 Integration of novel nano-materials into existing
production lines
NMP-22-2015 Fibre-based materials for non-clothing
applications
FoF 10-2015: Manufacturing of Custom Made Parts for
Personalized Products
FoF-12-2015: Industrial technologies for advanced joining and
assembly processes for multi-materials
WATER-1b-2015: Demonstration/pilot activities
H2020-WASTE-6a-2015: Eco-innovative solutions
Project ideas presented at
18 September 2014 Brokerage Event
TEPPIES call 2-2014
textile research
Expression of Interest for Preparation of a Project Proposal
Call Identification
TEPPIES
H2020
Call n°
02-2014
NMP-25-2014
Opening Date
27/06/2014
11/12/2013
(Publication Date)
Closing Dates
05/09/2014
09/10/2014
07/12/2014
Proposer Identification
Prime proposer organisation
Key industry partners
Key research partners
GRADO ZERO ESPACE SRL (Italy)
“Basalt Projects” JSC (Russia)
GRADO ZERO ESPACE SRL and “Basalt Projects” JSC
Proposal Information
Project acronym (optional)
Full project working title
EC work programme topic
HQ-BAFIPROTECH
High Quality BAsalt FIbre PROduction TECHnology
NMP-25-2014: “Accelerating the uptake of
nanotechnologies, advanced materials or advanced
manufacturing and processing technologies by SMEs”
The proposed project aims at integrating European SMEs and Russian owners of Basalt technology, with
the purpose to develop a feasibility study for assessing the technological/practical, as well as economic
viability of using Basalt for a new generation of sustainable, high-end and low-cost applications of
innovative composites manufactured by this rock. The Basalt material is not a “young” material, despite
of this, the fibre-based applications is possible to realize with this rock are extremely promising for
several end-uses in the composites sector, at the moment looking for innovative material solutions with
new features to be exploited on the market - i.e., petrochemical industry, construction and building,
marine applications. At the present, just a handful of countries in the world, including Russia, Ukraine,
China, Canada and USA, possess the production technology for the fabrication of continuous fibres with
Basalt of interesting quality and reproducibility for the market. The main reason of this technological
delay on Basalt is not in a crisis of the demand, which is growing instead, but in the low production
activity by Companies, and in the quality that seems to have problems in reproducibility. For various
reasons, industrial producers are not able to organize the production of superior Basalt fibres on relevant
scales. Market is ready to place orders for Basalt-derived products, but only having assurances of high
quality, reproducibility and supply capacity. The overall project strategy, planned on four years for the
phase 1 (6M), 2 (24M) and 3 (18M), will be carried out with two principal key objectives intended for
addressing the business opportunity presented at best. In the first, cost-effective CBFs (continuous Basalt
fibres) with superior quality and two derived products - i.e., rovings and chopped fibres - will be realized
on a pilot scale plant (700 tonnes/year) built in Russia - where at the moment is present the technology
and the raw materials - in joint partnership with EU Companies and expressly targeted on the EU market.
Key results for this objective: a. obtaining a final production price inferior with respect of that of
comparable products derived from the Glass technology, but with superior performance, extended life
and end-uses; b. ensuring the reproducibility of the Basalt technology, shifting the production from the
step 2.0, present at the moment in several production plants worldwide, towards the next generation of
production, 3.0 (standard and replicable technology of continuous basalt fibre - CBF - market-oriented).
In the second, the produced continuous fibres and the derived products (fabrics, mats and tapes), will be
tested in the specific applications for the key sectors envisaged above, to have a pre-commercialisation
of the final products within the end of the phase 2 for the EU market.
TEPPIES call 2-2014
textile research
Partner Search (optional)
Search n
1
Partner type
Industry
Companies involved in the composites industry interested in the Basalt technology (manufacturing and
commercialisation of the products)
Companies with expertise in textile-based composite materials for petrochemical industry, construction
and building, marine applications, interested in the Basalt technology (manufacturing and
commercialisation of the products)
Search n
2
Partner type
RTD
RTD entities interested in research and development of Basalt-based products (material solutions) for
petrochemical industry, construction and building, marine applications
RTD entities interested in research and development of the Basalt manufacturing technology (also
additive manufacturing)
Contact for this Expression of Interest
Title
Mr/Ms/Prof/Dr
First name
Giada
Surname Dammacco
Title
Mr/Ms/Prof/Dr
First name
Enrico
Surname Cozzoni
Organisation name
GRADO ZERO ESPACE SRL
E-mail addresses
[email protected] Direct phone number
0039-0571-80368
[email protected]
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
example H2020
Call n°
02-2014
SC5-20-2014
Opening Date
27/06/2014
11/12/2013
Closing Dates
09/10/2014
17/12/2014
Prime proposer
organisation
Key industry
partners
University of Maribor, Faculty of Mechanical Engineering
Institute of engineering materials and design, Slovenia
PREVENT & DELOZA d.o.o., Slovenia (Production of Workwear, protectivewear,
gloves and uniforms)
OPLET d.o.o, Bosnia and Herzegovina (Production of knitwear, men's lingerie and
sportswear)
VINJETA d.o.o, Bosnia and Herzegovina (Printing on textile materials)
EXCLUSIVE LINGERIE d.o.o, Bosnia and Herzegovina
(Production of lingerie, swimwear and sportswear for fitness and aerobics)
Key research
partners
University of Banja Luka, Bosnia and Herzegovina
University of Novi Sad, Serbia
EC workprogramme topic
EITM
ECO-INNOVATIVE TEXTILE MATERIALS FOR MEDICAL AND
OTHER FUNCTIONAL USE
CS5-20-2014: Boosting the potential of small
businesses for eco-innovation and a sustainable
supply of raw materials
Non-confidential abstract (max. 100 words):
Nowadays, consumers’ demands are increasing in terms of comfort, functional and especially very
strict antimicrobial properties of clothing that is used in medicine and sports. The aim of project is to
modify conventional textile processing (substituion convencional bleaching with O3 and H2O2, plasma
and enzymes treatments), dyeing and printing procedures (zeolite and herb extracts with and
without microencapsulation) and to develop innovative, functional and environmentally friendly
antimicrobial textile products for the medical, sports and other fields of use. This new methods of
eco-friendly antibacterial dyeing and printing will represent a significant contribution for the
development of small and medium enterprises.
Search n°
Partner type
Industry/Research
Title
Prof. Dr
Organisation name
E-mail address
First name
Jelka
Name GERŠAK
University of Maribor, Faculty of Mechanical Engineering
[email protected]
Direct phone number
+386 2 220 7960
TEPPIES call 2-2014
textile research
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
H2020
Call n°
02-2014
NMP-02-2015
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
AITEX
Spanish spinning company
AITEX
Monitoring and control of yarn nano-composites production
operational environment.
NMP-02-2015 Integration of novel nano-materials into existing
production lines
Project aim: The idea of the project is to develop and demonstrate in real environment the introduction of
nanofiller into yarn and fabric. The idea is to demonstrate that the production of yarn and fabric
nanocomposites is feasible into existing industrial processes.
Actions: 1)The idea is to install a set of control systems able to monitor both: i) the production parameters of
the nano-composites and ii) the specific features of the nano-composites (i.e. the nano-filler dispersion) 2)
Several case of studies will be used for testing and validating the project developments. 3) Look for crossovers
with other sector like automotive of construction.
Search n°
Partner type
Industry/Research/Other (delete the unnecessary)
Short description of profile (competences required, geographic origin etc., max 100 words):
AITEX.:
Spanish spinning company: (To be confirmed)
Research institution: Control systems developer.
Research institution: Nano-composites developer.
Companies: End-user of the developments. Integration the project output into their production lines.
Companies: Suppliers of nano-fillers.
Title
Dr
Organisation name
E-mail address
First name
Ramos Fernández
Name
ATIEX
[email protected]
Direct phone number
José Manuel
+34 965542200
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
example H2020
Call n°
02-2014
NMP-02-2015
NMP-22-2015
Opening Date
27/06/2014
22/10/2014
22/10/2014
Closing Dates
05/09/2014
26/03/2015
26/03/2015
TECHTERA
French textile manufacturer
-
Light and flexible efficient textile protections against ionizing
radiations.
NMP-02-2015 / NMP-22-2015
A French industrial partner of TECHTERA is developing a novel technology for the production of
innovative protective textiles against radiations. Results of conducted studies and experiments are
very relevant: efficient protection against ionizing radiation is reached with light and flexible
structures. Applications of this new product could be found in different sectors such as medical
market, personal protective equipment and industrial sector.
Search n°
-
Partner type
Industry/Research/Other
Industrial partners interested in the application of the innovative textile.
End user.
RTD performers.
Title
Mr/Ms/Prof/Dr
First name
Bruno
Name
Organisation name
TECHTERA
E-mail address
[email protected]
Direct phone number
Mougin
+33420302880
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
H2020
Call n°
02-2014
NMP-02-2015
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
AITEX
Spanish spinning company
AITEX
Smart monofilaments for industrial application.
NMP-22-2015 Fibre-based materials for non-clothing
applications
Project aim: The idea of the project is to develop monofilaments able to be used in 3D printing. 3D printing is
demanding filaments with special features like electrical conductivity, luminescence etc.
Actions: 1) The idea is to develop monofilaments filled with nano-particles with the aim of providing smart
features to the filaments. 2) Provide functional properties like self-cleaning, electrical conductivity, anti-fungi
etc. 3) To characterize the dispersion of the nanoparticles into the filaments. 4) To validate the monofilaments
as a precursor in 3D printing. 4) Several case of studies will used for testing and validate the project
developments. 5) Look for crossovers to other sectors.
Search n°
Partner type
AITEX.:
Spanish spinning company: (To be confirmed)
Research institution: Characterization of nano-composites.
Research institution: Nano-composites developer.
Companies: End-user of the developments. Integration the project output into their production lines.
Companies: Suppliers of nano-fillers.
Title
Dr
Organisation name
E-mail address
First name
Ramos Fernández
Name
ATIEX
[email protected]
Direct phone number
José Manuel
+34 965542200
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
H2020
Call n°
02-2014
NMP-22-2015
Opening Date
27/06/2014
11/12/2013
(Publication Date)
Closing Dates
05/09/2014
26/03/2015
08/09/2015
GRADO ZERO ESPACE SRL (Italy)
Textile companies from Austria and Italy
RTD entities from Greece, Slovenia, Switzerland, Poland, Austria,
Norway and Portugal
EC work programme topic
NETEFRES
NEw TEchnical FibRES (for non-clothing applications)
NMP-22-2015: “Fibre-based materials for non-clothing
applications”
The project aims at analyse, develop and test material solutions starting from two very interesting and
promising sources of fibres. The first is a rock, the Basalt, and will give rise to fibre-based composites to
be used in petrochemical industry, construction and building and marine applications for structural and
protective end-uses. The second is a naturally-derived biopolymer, the Keratin, obtained by waste
feathers and exhausted wool, to be used in green and materials chemistry applications for the
separation, recovery and purification of biological or biosynthetic products, in biomedical end-uses for
tissue engineering, regenerative medicine, wound healing, drug delivery, and in technical devices
designed for safety purposes.
1) BASALT: between all the fibres used in the composites industry, that coming from Basalt is a
unique product, first because is derived from volcanic lava deposits - i.e., is of natural origin. The
fibres are manufactured directly from the basaltic rock in a single-melt process, and comprising
only single-ingredient raw materials melts, i.e., with no hazardous chemical additives - e.g.,
oxide boron (B2O3), essential additive for the production of a good quality fibreglass.
Furthermore, the production process is completely sustainable, with low energy required - only
5kWh/kg of electricity - and low fabrication costs: that of energy (gas and electricity), is the
major, it covers an half of all the production costs. Basalt fibres are superior to other chemicallyderived fibres (i.e., carbon, aramid and glass), in terms of thermal stability, heat, sound and
electrical insulation, resistance to fire, chemically active and radiative environments, damages
due to vibrations, and for the overall durability. Furthermore, the fibre can be completely
recycled in producing new fibres, without degradation in performance.
2) KERATIN: as original raw material, Keratin can be used in the development of novel fibrous
composites for a variety of uses. Being a very effective naturally-derived biopolymer it can play a
fundamental role in materials chemistry for its numerous functional properties and
biodegradability. For its intrinsic bioactivity and biocompatibility it can be used for developing
materials for the biomedical sector. In addition, Keratins are capable to form self-assembled
structures that regulate cellular recognition and behaviour for applications in tissue engineering,
regenerative medicine, wound healing and drug delivery. Modified Keratins are also very
important in green chemistry, where they can be functionalized in biosorption active materials
for their selective binding features to link with heavy metals and toxic molecules. All the sources
of raw materials from which extract the Keratins are renewable and already present in the waste
TEPPIES call 2-2014
textile research
and disposal process of e.g., textile industry (i.e., wool), and poultry meat sector (i.e., feathers).
The use of these sources also would provide effective solutions regarding large amounts of
wastes from these industrial sectors, especially considering that, apart from a minor
consumption of these types of wastes (e.g., for animal feed), disposal of the remaining bulk
poses a significant environmental threat.
Search n
1
Partner type
Industry
Companies with expertise in textile-based composite materials for petrochemical industry, construction
and building, marine applications, interested in Basalt-based products
Companies with expertise in green and materials chemistry, biomedical applications, safety devices,
interested in Keratin-based products
Search n
2
Partner type
RTD
RTD entities interested in research and development of Basalt-based products (material solutions) for
petrochemical industry, construction and building, marine applications
RTD entities interested in research and development of Keratin-based products (material solutions) for
green and materials chemistry, biomedical applications, safety devices
Title
Mr/Ms/Prof/Dr
First
Giada
name
Title
Mr/Ms/Prof/Dr
First
Enrico
name
Organisation name
GRADO ZERO ESPACE SRL
E-mail addresses
[email protected]
[email protected]
Surname
Dammacco
Surname
Cozzoni
Direct phone number
0039-0571-80368
TEPPIES call 2-2014
textile research
Call Identification
Call n°
02-2014
NMP-22-2015
TEPPIES
H2020
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
Centrocot (IT)
EU University-Sports Medicine Department
Spiber
Fibre-based equipment for sport and leisure
NMP-22-2015 <Fiber-based materials for non-clothing
applications>
This project aims to develop and integrate new fibre-based materials in the sport sector, mainly addressing to
challenging tools and training equipment and environments.
Textiles and fibres will be integrated into innovative composites, to produce athletic gears, and their
improvements in performance (such as flexibility, strength, durability) will be proved. Furthermore smart textiles
will be integrated into training equipment or sport tools, to monitor and improve the athlete performance and to
check body stress and attitudes. For example electronic sensors (smart textile pads, floor coverings, etc.) could
enable the collection of spatial data, while pressure/chemical sensors, integrated into flexible substrates, could
enable the monitoring of physical parameters.
The targets are both extremely sectorial and widely spread sport and leisure equipment, for high level
competitions or everyday use, to maximise the societal impact of the action. In this perspective the outcomes of
the proposal could be exploited also for medical and wellbeing sector, with their integration into rehabilitation
tools and equipment.
Search n°
1
2
3
4
5
6
Partner type
Industry/SME
RTD
Industry/SME
Industry/SME
RTD
RTD/Organization
7
RTD/Organization
Description
Sport and leisure equipment manufacturer
Expertise in composites required
Textile manufacturer with expertise in sensors and smart textiles
Sensor manufacturer – System integrator
Expertise in sensors and smart textiles required
Expertise in human health monitoring and diagnosis, to highlight the
training improvements and check the athlete vital parameters
Sports and leisure associations
Title
Dr
Organisation name
E-mail address
Title
Ing.
Organisation name
E-mail address
First name
Chiara
Name
Centrocot S.p.A.
[email protected]
Direct phone number
First name
Roberto
Name
Centrocot S.p.A.
Besnati
+39 0331696787
Vannucci
+39 0331696778
TEPPIES call 2-2014
textile research
Call Identification
Call n°
Opening Date
Closing Dates
Tallinn University of Technology, Tallinn, Estonia
a electrospinning company in Estonia, a spinning company in
Estonia
N/A
Industrial production of functional textile yarns by
electrospinning
NMP-22-2015: Fibre-based materials for non-clothing
applications
The main objective of the project is utilisation of electrospinning in industrial scale by increasing productivity
and durability of the process for producing nanofibre based yarns. The main task is accompanied with
application of the yarns in new weaved or knitted functional textiles and composite materials. The following
actions (WP-s) are planned: application of needleless methods in electrospinning of yarns; development of
accurate and robust process; improvement of physical properties of the yarns; utilisation of “Green” solvents
and sustainable solvent systems for electrospinning processes; development of electrospun yarn based textile
materials and reinforcements with high marketing potential.
Search n°
1
Partner type
Industry
Companies interested in the production of yarns by electrospinning, previous experience in electrospinning,
Europe
Search n°
2
Partner type
Industry
Companies interested in the production of functional textile materials (energy harvesting/storage,
filtering/prification, sensing, protective/shielding, etc.), biomaterials, Europe
Search n°
3
Partner type
Industry
Companies experienced in spinning, (post)processing of textile fibres and yarns, Europe
Search n°
4
Partner type
Research
Experience in electrospinning technology, modelling and simulations, world
Search n°
5
Partner type
Research
Experience in development of functional textile materials, biomaterials, world
Title
Prof
Organisation name
E-mail address
First name
Andres
Name Krumme
Tallinn University of Technology, Department of Polymer Materials
+372 620 2907
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
Horizon2020
Call n°
02-2014
NMP-22-2015
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
Centrocot S.p.A.
Automotive Filter Manufacturer (IT)
CleanIT
Design and production of a new concept of fabric able to purify
fluids in general, neutralizing and avoiding the growth of
contaminant molecules and harmful microorganisms
NMP-22-2015 < Fibre-based materials for non-clothing
applications >
The project aims to develop and design a new concept of fabric and/or no-woven able to clean and filter
different substances as fluids (liquid and gas) to purify them and not to permit the growth and the
proliferation of potential harmful microorganisms as bacteria, increasing the useful life of the product to
which they belong. This new production will be focused also, where it’s possible, on the use of recycled
material.
The involved industrial contests could be:
Automotive (antibacterial filter)
Furnishings (home, hospital, office, etc.)
Tenso-structures and light-weight buildings (awnings, gazebos, etc.)
To obtain this versatility of the textile product, an application-driven design will be needed ensuring the
compliance with the essential requirements in term of environment (temperature, humidity, etc.), structure
of textile and other boundary conditions.
Search n°
1
2
3
4
5
Partner type
Industry/RTD
Industry/RTD
Industry
Industry
RTD
Description
Producer of virgin and recycled fibres (PA, PET)
Manufacturer of fabric and/or no-woven
Manufacturer of chemicals
End-users
Environmental Research Center
Title
Dr
Organisation name
E-mail address
Title
Ing.
Organisation name
E-mail address
First name
Chiara
Name
Centrocot S.p.A.
[email protected]
Direct phone number
First name
Roberto
Name
Centrocot S.p.A.
Besnati
+39 0331696787
Vannucci
+39 0331696778
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
example H2020
Call n°
02-2014
NMP-02-2015
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
CITEVE(PT)
AFF (PT)
CENTI (PT); INESC (PT), ITA(DE), PORTO UNIVERSITY MEDICAL
SCHOOL(PT)
MEDFIT-K
Customized Knitted Burn Wound Medical Textiles
FoF 10-2015: Manufacturing of Custom Made Parts for
Personalized Products
The wound care sector is one of the most advanced in the medical industry, with a massive
global demand from patients suffering from wounds, burns, and various diseases.
Ensuring satisfactory wound healing is often difficult due to the dynamic nature of the skin,
requiring fulfilment of multiple objectives at different stages of the healing process(1). Burn
wound is the central problem in the burn patient, and successful management and timely
closure of the burn wound is essential to survival. The prevention of burn wound infection is
certainly critical in this process. Historically, invasive burn wound infection, or “burn wound
sepsis”, was the leading cause of death in burn patients (2). The idea of the MEDFIT-K
proposal is to develop and integrate advanced design and manufacturing small scale
technology line towards customized knitted medical textiles production, for burn wound first
treatment and wound dressing, within the hospital shop floor. MEDFIT-K aims at developing
a research & innovation program towards the design and development of flexible small scale
knitted patches production unit for burn wound textiles, with customized fitting and
personalized wound healing properties, which should be operated within the hospital
environment.
(1)Bioactive Nanofibres for Wound Healing Applications
Victor Leung, Ryan Hartwell, Heejae Yang, Aziz Ghahary, Frank Ko
(2) Burn wound infections
LC Cancio, M.D., PA Howard, M.D., AT McManus, SH Kim, M.D., CW Goodwin, M.D., and BA Pruitt, Jr., M.D.
US Army Institute of Surgical Research, Fort Sam Houston, Texas, U.S.A.
Search n°
Partner type
Industry/Research
Industry – Knitting machines producers; Small Scale Laundry/Impregnation
Yarn producer for medical textiles
Title
Mr/Ms/Prof/Dr First name
Helder
Name
Organisation name
CITEVE
E-mail address
[email protected]
Direct phone number
Rosendo
+351252300300
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
example H2020
Call n°
02-2014
NMP-02-2015
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
HOHENSTEIN INSTITUTE
Personalised production of technical clothing
FoF-10-2015: Manufacturing of custom made parts for
personalised products
The project aims to manufacture personalised clothing products for technical and medical
applications. Apart from optimized fit analysis via scanner technology, the scanning of textile and
apparel will be undertaken for developing ready to use custom made parts. Other aspects of the
project include design processes, customer driven small series production in Europe and mass
customization of end products. It also envisages efficient supply chains for the fast production and
distribution of the customised clothing products.
Search n°
Partner type
Title
Dr
Organisation name
E-mail address
First name
Roshan
[email protected]
Name
Direct phone number
Paul
+49 7143 271 711
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
Horizon 2020
Call for Factories
of the Future
Call n°
02-2014
H2020-FoF-2015
Opening Date
Closing Dates
22/10/2014
04/02/2015
Helytex Ltd.
Open-minded and innovative garment manufacturers with IT
application experience
Any with interest in the proposed topics and co-operation
willingness
Industrial Production of Custom-tailored Garments with New
Generation Pattern-design Techniques
FoF-10-2015 Manufacturing of custom made parts for personalised products
The key to radically improve personalization in Fashion Industry is the wider use of advanced IT
technologies.
For this developing of novelty industry-specific ERP system that:
 provides full data integrations from design to supply
 able to break with outdated industry procedures, traditions, norms, customs and concepts
that hinder the application of the achievements of IT technologies
and elaborating of new pattern making techniques that:
 ensure better body fit
 much more efficient than current CAD methods
 apply building-block concepts
 keep input data demand at moderate level
 seamlessly integrate with ERP system
can open up new horizons for EU fashion industry.
Search n°
Partner type
Title
Dezso
Name
Organisation name
Helytex Ltd.
E-mail address
[email protected]
Direct phone number
Horvath
+36-30-5043137
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
H2020
Call n°
02-2014
FoF-10-2015
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
Institut für Textiltechnik _RWTH Aachen University
tbd
Swerea IVF, Sweden; Citeve Textile Technology, Portugal; University
of Leeds, UK
McTecTex
Mass Customised textile design and manufacturing
FoF-10-2015: Manufacturing of custom made parts for personalised
products
Innovative production and supply chain concepts have to be carried out by implementing new machines
and processes. In most cases the data transfer from designing the individual textile pattern (eg. by the
customer) to the knitting machine control is challenging due to a missing integration of seamless data
transfer into the process chain. By using e.g. the internet of things and/or services and new simulation
approaches the connection of interfaces between design and manufacturing can be improved. The more
flexible the individual product-service data can be transformed to manufacturing, the more flexible the
product is realisable. Therefore, a system which enables to gain the customer´s requirements regarding
the product and transfer these directly to corresponding machine parameters along the entire process
chain will be developed. In addition, a production guide system is to be developed in order to manage
the control production along the value-added chain.
Search n°
Partner type
Industry Partners:
 Specialist in automation/computer scientist: Programming seamless data integration from 3D scanning into
machine parameters and mass production of individual requirements
 Knitting machine manufacturer: Delivery of a flexible (circular) knitting machine ;supporting Consortium by
mechanical textile machinery know-how
 Machine Control development regarding MC- requirements
 Producer of technical or medical knitted structures: Delivery of technical requirements of the functional textile,
bench marking and/or realization of the fabrics in cooperation with ITA RWTH Aachen, Germany
 End-User: Delivery of benchmarked product (conventional produced); know-how of market/client relevant
requirements for the product
 Consultant: Improvement in production by linking the production with clients´ requirements and wishes
Research Partners:
 Focused in research of Mass Customisation concept and consequences on client´s willingness-to-pay
Title
Ms
Organisation
name
E-mail address
First name
Kristina
Name
Institut für Textiltechnik der RWTH Aachen University
[email protected]
Simonis
Direct phone number
+49 241 80 23465
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
example H2020
Call n°
02-2014
NMP-02-2015
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
Hybrid joining techniques for flexible materials
FoF-12-2015: Industrial technologies for advanced joining and
assembly processes for multi-materials
The project aims to develop hybrid joining and assembly processes for flexible materials, including
textiles. The proposed techniques involve plasma treatments, laser welding process, bonding using
adhesives and mechanical joining. All types of joints will be tested and validated, and the developed
end products will be fully recyclable and cost-effective.
Search n°
Partner type
Title
Dr
Organisation name
E-mail address
First name
Roshan
[email protected]
Name
Direct phone number
Paul
+49 7143 271 711
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
example H2020
Call n°
02-2014
NMP-02-2015
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
CITEVE
MABERA,
AITEX, UAB, NEXT TECHNOTESSILE
MULTIWATER
Multi Sector On Line System For Smart Water Management
WATER-1b-2015
Multiwater - Multi Sector On-line Smart Water Management System, aims to develop a multiparameter water monitoring system, for safe water reduction, recycling and reuse that can
be applied to multiple industrial sectors. The project implementation will be focus on Textile
Industry and then exploited to other business activities.
The water management system (Multiwater) will include a monitoring and controlling
scheme, which will comprise a sensor network placed in water conducts of the industrial
process, and those sensors will be connected to a central computer that will provide data
related to water parameters allowing a smart and safe decision on water destination or use.
On-line sensor systems will measure continuously several parameters, like pH, temperature,
colour, turbidity or conductivity on wastewaters streams and the software program will
decide if the stream can be reuse or used as fresh water in another process and also decide
about the heat recovery of wastewaters streams. This system will also decide about the
water quantity needed in a certain productive step, optimizing that industrial process. The
smart decision aiming a safe reuse of process water, from the point of view of process and
product quality will be based on existing research knowledge on water contaminants
influence at different concentrations on the industrial processes where that water is to be
reused. This proposal is built upon the original Multiwater proposal already submitted in
2011 but now reviewed and oriented to this new topic.
Search n°
Partner type
Industry/Research
Title
Helder
Name
Organisation name
CITEVE
E-mail address
[email protected]
Direct phone number
Rosendo
+351252300300
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
example H2020
Call n°
02-2014
NMP-02-2015
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
Treatment processes for industrial wastewaters
WATER-1b-2015: Demonstration/pilot activities
The project aims to commercialise water treatment processes for industrial wastewaters and will
emphasise on the aspects such as: water treatment, reuse and recycling. Special focus is given to the
treatment of industrial laundry wastewater. The sustainable and innovative solutions will be based
on low cost biological processes, involving multi-stage membrane filtration and treatment in
bioreactors.
Search n°
Partner type
Title
Dr
Organisation name
E-mail address
First name
Roshan
[email protected]
Name
Direct phone number
Paul
+49 7143 271 711
TEPPIES call 2-2014
textile research
Call Identification
TEPPIES
example H2020
Call n°
02-2014
NMP-02-2015
Opening Date
27/06/2014
11/12/2013
Closing Dates
05/09/2014
26/03/2015
Instytut Włókiennictwa (Textile Research Institute)
Osrodek Badawczo Rozwojowy Przemysłu Płyt
Drewnopochodnych (Research and Development Centre for
Wood-Based Panels)
Centrum Naukowo – Badawcze Ochrony Przeciwpożarowej
Państwowy Instytut Badawczy (Scientific and Research Centre for
Fire Protection National Research Institute)
ArWaTex
“Eco innovative development of textile aramid waste” ArWaTex
H2020-WASTE-6a-2015: Eco-innovative solutions
The aim of the ArWaTex project is development of recycling methods of the post-consumer and
post-production textile aramid waste. The essence of project is to develop the most suitable grinding
techniques, and the eco-innovative and economic application of recycled materials as functional
flame retardant boards and technical shields. Results of ArWaTex will help to solve the problem of
high value unbiodegradable waste disposal and will create a new sustainable production. The work
plan includes examination of grinding process, analysis and selection of recycled materials for
particular purposes, development of model products and their comprehensive testing for the endusing purposes.
Search n°
Partner type
Industry /Research/Other
Industry Partner (SME) preferred. Sought Partner should operate in recycling (defibration
and selection the fibrous waste) and cooperate with research institution. Expected
experience in textile recycling. Optimum geographical location in Middle or East Europe.
Title
Dr
Organisation name
E-mail address
First name
Malgorzata
Name
Textile Research Institute
[email protected]
Direct phone number
Cieslak
+48422534405

TEPPIES Call 02-2014 Expressions of Interest Targeting HORIZON 2020 Topics:

Transcription

Similar documents

Horrockses

SAMUEL SLATER – Englishman who brings the secrets of textile

GCE Art and Design New Specification Personal Creative Enquiry

1.800.323.5246 STANDARDTEXTILE.COM

objectives context

M 4, 5 and 6 of March 2014

Kenya Textile Training Institute (KTTI) Brochure

educations in textile and design

Spidi Ergo 365 Expedition Rukka Arma

Certificate delivered by the European Commission, as