Lexmark C74x/X74x Product Overview and Changes For Training Use only

Transcription

Lexmark C74x/X74x Product Overview and Changes For Training Use only
Lexmark C74x/X74x
Product Overview and Changes
For Training Use only
Topics
•
•
•
•
•
Product Overview
C73x vs. C74x
X73x vs. X74x
Hardware Changes
Firmware Code Changes
For Training Use Only
Lexmark C746n, C746dn, C746dtn Overview
Performance
Print Technology
Connectivity
35/35 ppm
9s TTFP, 20s from sleep
800 MHz Power PC
256 MB memory standard, 1.25GB max
User Flash
Tandem Color Laser
Belt Fuser
Gigabit Ethernet & High-speed USB 2.0
Front USB-A w/ Pictbridge function
1 ISP + slot for hard drive
Optional: Serial, Parallel, Fiber, Wireless
Op Panel
Print Quality
2.4” Color APA, backlight, Numeric pad
True 1200x1200 dpi
4800 Color Quality
Fonts
Full PCL and PS3 font load
Font Cards
Paper Handling
Bond, Recycled, Card Stock,
Transparency, Labels, Envelope
Banner Support
650 sheet standard input
4300 sheet max
300 sheet output
Duplex (dn, dtn)
Optional 2000 sheet tray, SMT
Datastream/Firmware
PS 3, PCL 6, PPDS,
PDF, JPG, TIFF, XPS
DLE’s
Bar code, PrintCryption
Chinese Forms Card
Duty Cycle
1500/9200 average duty cycle
85K max duty cycle
Supplies
SWE: 4K color / 4K mono
Aftermarket: 12K mono / 7K color
PC Drums: 20K
For Training Use Only
Size and Acoustics
Warranty
1 yr. onsite
17.7”H x 17.1”W x 15.0”D
54.5 lb
53(running) / 31(idle) dBA
Quiet Mode 47 dBA
Lexmark C748e, C748de, C748dte Overview
Performance
Print Technology
Connectivity
35/35 ppm
9s TTFP, 20s from sleep
800 MHz Power PC
512 MB memory standard, 1.54GB max
User Flash
eSF
Tandem Color Laser
Belt Fuser
Gigabit Ethernet & High-speed USB 2.0
Front USB-A w/ Pictbridge function
Rear USB-A for Card Reader
1 ISP + slot for hard drive
Optional: Serial, Parallel, Fiber, Wireless
Op Panel
Print Quality
4.3” Touch Screen, Numeric pad, Speaker
True 1200x1200 dpi
4800 Color Quality
Fonts
Full PCL and PS3 font load
Font DIMM/SIMM support
Font Cards
Paper Handling
Bond, Recycled, Card Stock,
Transparency, Labels, Envelope
Banner Support
650 sheet standard input
4300 sheet max
300 sheet output
Duplex (de, dte)
Optional 2000 sheet tray, SMT
Datastream/Firmware
PS 3, PCL 6, PPDS,
PDF, JPG, TIFF, XPS
DLE’s
Bar code, PrintCryption
Chinese Forms Card
Duty Cycle
2500/10000 average duty cycle
100K max duty cycle
Supplies
SWE: 12K mono / 10K color
Aftermarket: 12K mono / 7K/10K color
PC Drums: 20K
For Training Use Only
Size and Acoustics
Warranty
1 yr. onsite
17.7”H x 17.1”W x 15.0”D
54.5 lb
53(running) / 31(idle) dBA
Quiet Mode 47 dBA
Lexmark X746de, X748de, X748dte Overview
Performance
Print Technology
Connectivity
35/35 ppm
9s TTFP, 20s from sleep
800 MHz Power PC
256 MB memory standard, 1.25GB max
User Flash
Tandem Color Laser
Belt Fuser
Standard - 1 ISP + slot for hard drive,
1GB Ethernet
USB 2.0 High speed (Device, Front, Card reader)
Optional – 160+GB HD (Optional)
Optional – Serial, Parallel, Fiber, Wireless Gigabit
Print Quality
Op Panel
True 1200x1200 dpi
4800 Color Quality
7” Color e-Task WVGA,
10-digit numeric keypad
Paper Handling
Fonts
Bond, Recycled, Card Stock,
Transparency, Labels, Envelope
Banner Support
650 sheet standard input
ADF/RADF: 50
Standard Output: 250
Optional Input: 550 Tray, 2000 High
Capacity Feeder, Special Media Drawer
Full PCL and PS3 font load
Font Cards
Datastream/Firmware
PS 3, PCL 6, PPDS,
PDF, JPG, TIFF, XPS
DLE’s
Duty Cycle
C746 Max Duty: 85K/month
C746 Average: 1500-9200 pages/month
C748 Max Duty: 100K/month
C748 Average: 2500 – 10,000 pages/month
Bar code, PrintCryption
Chinese Forms Card
Supplies
C746 SWE : 6K color/6K black
C748 SWE: 10K color/12K black
Black AM Toner: 12K
CMY AM Toner: 7K or 10K
PC Drums: 20K
For Training Use Only
Size and Acoustics
Warranty
1 yr. onsite
543W x 608D x 788H
(mm x mm x mm)
97lbs (43.1kg), Goal 53dBA / 31dBA
Lexmark C734/C736 vs. C746/C748
2009
C736n, dn, dtn
35/35 ppm
33/33 ppm A4
C734n, dn, dtn
30/30 ppm
28/28 ppm A4
For Training Use Only
Enhancements
4.3” Color Touch Screen
eSF Standard
Card Reader Support Standard
Faster Processor
More Memory
Higher SWE Toner
Contextual Sound
Faster Speed
Faster TTFP
New 2.4” Color Display
Faster Processor
Gigabit Networking
Higher AM Yield Mono and Color Toner
dn and de models add duplex
dtn and dte models add a 550 sheet tray
2012
C748e, de, dte
35/35 ppm
33/33 ppm A4
C746n, dn, dtn
35/35 ppm
33/33 ppm A4
4.3” Touch w/ eSF
More Memory
Higher SWE
Lighter AM Cartridges
Lower CPP
Lexmark X736/X738 vs. X746/X748
2009
X738de, dte
35/35 ppm
33/33 ppm A4
X736de
35/35 ppm
33/33 ppm A4
For Training Use Only
Enhancements
Faster Processor
Gigabit Networking
User Print Quota Support
Higher SWE Toner
Contextual Sound
Hibernate Mode
Print Preview
Post Job Process
Faster Processor
Gigabit Networking
Higher AM Yield Mono and Color Toner
Contextual Sound
Hibernate Mode
Print Preview
Post Job Process
2012
X748de, dte
35/35 ppm
33/33 ppm A4
X746de
35/35 ppm
33/33 ppm A4
Hard Drive Standard
Higher SWE
Higher AM Cartridges
Lower CPP
Hardware Changes - Fuser
The C73x/X73x Fusers had a screw on the Duplex Guide
which made it difficult for customers to access accordion jams.
The C74x/X74x fusers do not have this screw so the guide can
be opened for easy access into the fuser.
To open the guide, simply move the release lever and unlock
the guide pin
C73x/X73x Screw
C74x/X74x No Screw
These new fusers are compatible with the C73x and X73x
printers. In time, only the new fusers will be available as a
replacement part for the C73x/X73x.
If this pin is not in its
“Locked” position, the
Fuser will not install.
For Training Use Only
Hardware Changes – Cartridge Contacts
To eliminate problems with errors associated with the cartridge contacts, the old copper colored
contacts in the C73x/X73x machine and Toner Cartridges are replaced with plated silver ones. In
addition, the printer contacts can now be ordered as replaceable FRUs.
C73x/X73x Contacts
C73x/X73x Contacts
C74x/X74x Contacts
C74x/X74x Contacts
Continued on next page
For Training Use Only
Hardware Changes – Cartridge Contacts con’t
Below are pictures of the Toner Cartridges with different contacts.
C74x/X74x Contacts
C73x/X73x Contacts
C74x/X74x Contacts
C73x/X73x Contacts
For Training Use Only
Hardware Changes – MPF Pick Assembly
The MPF Pick arm is redesigned on the C74x/X74x to be more durable and to allow for easy removal.
Now, to remove the MPF Pick Arm, squeeze the green release lever and slide it off the shaft.
MFP Pick Arm
Green Release Lever
Squeeze the Green release lever
MPF Pick Arm removed
Continued on next page
For Training Use Only
Hardware Changes – MPF Pick Assembly con’t
For comparison, here is the C73x/X73x MFP Pick Arm compared to the C74x/X74x.
C73x/X73x MFP Pick Arm
C74x/X74x MFP Pick Arm
For Training Use Only
Hardware Changes – MPF Empty Sensor
To improve the MPF, a paper empty sensor now detects when the MPF is empty. An actuator inside the
opening of the tray springs upward when the tray is empty.
MFP Empty Sensor
MFP Empty Sensor Actuator
For Training Use Only
Hardware Changes – Duplex Edge Guide
A slight change is made to the Duplex Edge Guide in the C74x/X74x.
C73x/X73x Duplex Edge Guide
C74x/X74x Duplex Edge Guide
For Training Use Only
Hardware Changes – Scanner Lamp
Although the scanner looks identical to the X73x, the lamp light source uses an LED instead of a Xenon
lamp in the X74x models.
The procedure for servicing the scanner is the same if the CCD should need replacement.
For Training Use Only
Hardware Changes – C74x Power Consumption
The C74x has improvements for reduced power consumption. The power consumption levels listed in
the table below represent time-averaged measurements. Instantaneous power draws may be
substantially higher than the average. Values are subject to change. See www.lexmark.com for current
values.
Power Consumption by Mode:
Mode
Description
Power consumption
(Watts)
Printing
The product is generating hard-copy output from electronic inputs.
Simplex = 535 W
Duplex = 420 W
Copy
The product is generating hard-copy output from hard-copy original
documents.
600 W
ADF Scan
The product is scanning hard-copy documents.
85 W
Ready
The product is waiting for a print job.
48 W
Sleep Mode
The product is in a high-level energy-saving mode.
C746 = 6.8 W
C748 = 7.3 W
Hibernate
The product is in a low-level energy-saving mode.
0.55 W
Off
The product is plugged into a wall outlet, but the power switch is turned
off
0.0 W
Note: Some modes do not apply to every model. The power consumption levels listed in the table represent timeaveraged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject
to change. See www.lexmark.com for current values.
For Training Use Only
Hardware Changes – X74x Power Consumption
The X74x has improvements for reduced power consumption. The power consumption levels listed in
the table below represent time-averaged measurements. Instantaneous power draws may be
substantially higher than the average. Values are subject to change. See www.lexmark.com for current
values.
Power Consumption by Mode:
Mode
Description
Power consumption
(Watts)
Printing
The product is generating hard-copy output from electronic inputs.
560 W Simplex
435 W Duplex
Copy
The product is generating hard-copy output from hard-copy original
documents.
600 W
ADF Scan
The product is scanning hard-copy documents.
85 W
Ready
The product is waiting for a print job.
55 W
Sleep Mode
The product is in a high-level energy-saving mode.
11.0 W
Hibernate
The product is in a low-level energy-saving mode.
0.5 W
Off
The product is plugged into a wall outlet, but the power switch is turned
off
0.0 W
Note: Some modes do not apply to every model. The power consumption levels listed in the table represent timeaveraged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject
to change. See www.lexmark.com for current values.
For Training Use Only
Hardware Changes – Power Consumption con’t
Sleep Mode
The printers are designed with an energy-saving mode called Sleep Mode. Sleep Mode saves energy
by lowering power consumption during extended periods of inactivity and automatically engages after a
specified period of time. Factory default Sleep Mode Timeout = 30 minutes
By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 240
minutes.
• Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase
the response time of the product.
• Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more
energy.
Hibernate Mode
Hibernate is an ultra-low power operating mode. When operating in Hibernate mode, the printer is
essentially off, and all other systems and devices are powered down safely. The printer will not
respond to faxes, print jobs or other cues that would normally “wake” the printer when in sleep mode.
By default, Hibernate Mode is not enabled. You can enable through the embedded web server or
operator panel menus: Settings > General Settings > Sleep Button Settings
For Training Use Only
Code Changes
The C74x/X74x uses a different firmware code than it’s predecessor, the C73x/X73x. The menus are
slightly different as well as some error codes. Lexmark is transitioning all laser printers to a
standardized error code scheme to make error reporting more consistent throughout all products.
If you have previous experience on the C73x/X73x, keep in mind that the error codes may not mean
the same thing on the C74x/X74x. In addition, if you need to update code on a 73x or 74x printer,
make sure you use the correct code as the 73x code is not compatible with the 74x and vice versa.
For Training Use Only

Similar documents