GROOVE SPECIFICATION GUIDE

GROOVE
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
GROOVE Monopoint
Page 1 of 1
TYPE:
1. Style:
Direct (GRV)
2. Downlight Option:
Suspended with cord (8ft standard)
Suspended with 1/2” stem (ST) (increments of 12” is standard)
Surface Mount (S)
3. Downlight Option:
**37 Watt MR16 (MR16)
20 Watt CMH-MR16 (GX1020)
39 Watt CMH-MR16 (GX1039)
39 Watt CDM/PAR20 (CDMPAR20)
39 Watt CDM/PAR30 (CDMPAR30)
*CZEN7: Citizen® 1 x 7.6W Watt LED Module, 820LM, 80CRI, 3000K (CZEN7)
*CZEN7DIM: Citizen® 1 x 7.6W Watt LED Module, TRIAC Dimming
*CZEN7-H: Citizen® 1 x 7.6W Watt LED Module, Lutron® A Series Di
*CZEN10: Citizen® 1 x 10W Watt LED Module, 1000LM, 80CRI, 3000K (CZEN10)
*CZEN10DIM: Citizen® 1 x 10W Watt LED Module, TRIAC Dimming
*CZEN10-H: Citizen® 1 x 10W Watt LED Module, Lutron® Hilume A
*CZEN15: Citizen® 1 x 15W Watt LED Module, 1050LM, 80CRI, 3000K (CZEN15)
*CZEN15-0-10V: Citizen® 1 x 15W Watt LED Module, 0-10V Dimming, 1050LM, 80CRI, 3000K (CZEN15-0-10V)
*CZEN15-H: Citizen® 1 x 15W Watt LED Module, Lutron® A Series
*CZEN20: Citizen® 1 x 20W Watt LED Module, 1200LM, 80CRI, 3000K (CZEN20)
*CZEN20-0-10V: Citizen® 1 x 20W Watt LED Module, 0-10V Dimming, 1200LM, 80CRI, 3000K (CZEN20-0-10V)
**for LED MR16, retrofit lamp only
*No Accessory Options Available
4. Voltage:
120 - 120 volt (120)
277 - 277 volt (277)
**347 - 347 volt
**Not available in dimming
5. Finish:
6"
* AL (Anodized aluminum)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your
1
4 2"
*AL is standard on all monopoint products
6. Accessory Option:
*Hex - Hexcell Louvers (HEX)
*SNOOT - Snoot (SNT)
*SOL - Solite Lens (SOL)
*LSS - Linear Spread Lens (LSS)
*Not available on Czen 15 or Czen 20 options.
Design Specifications
Construction
Single piece machined aluminum housing.
Electrical Details
All Ballasts are Electronic <10% THD
Class P electronic ballasts
All transformers are electronic low voltage.
ETL Listed
Indoor Location Only
Emergency
Remote Emergency Ballast
Finish
AL is brushed clear and anodized aluminum - standard.
Powder Coat options are available. Consult factory.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
GROOVE Monopoint
Page 2 of 2
TYPE:
Standard: Pendant Wire Mounting with adjustable aircraft cable suspension
*4-1/2” dia. canopy
to cover 4-O Octagon Junction box Bullet Aircraft cable
suspension.
*Adjustable GripLock cable suspension
*8FT suspension hardware is standard on all
ALW suspended fixtures
Option: Seismic Bracing
Aircraft cable can
mount on side of
channel to seismic
anchoring.
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com